Extract Category, Attributes data in Multilingual

Hi experts,
I'm using the MDMGX to extract the Categories data using the F/M "MDM_COMM_CATEGORIES_EXTR".
data is populated (in debug mode) in all languages but, when the XML file created its showing only English language data. did I left any configurations / parameter values ?
Same with the CategoryAttributes data, using F/M "MDM_COMM_CAT_ATTRIBUTES_EXTR".
Let me know how to extract the Category data & Attribute data in multilingual and also explain the use of SETTYPES in the extraction part.If there is another way to extract data ? Please guide me.
Regards,
Rupesh K

Hi Rupesh,
For given port code define lang dependant field to be extracted under LANG_FIELDS field
e.g. for extracting country related data the entry should be like given below
MDM_PORTCODE = LT_Countries
Table_name = T005T
LANG_FIELDS= SPRAS=langkey,LANDX=Name,NATIO=Nationality
here it will fetch data from T005T table from which spras field will be mapped to langkey, landx will be mapped to Name & Natio to Nationality.
Just check data u entered under 'LANG_FIELDS' .
Refer to standard upload files given by SAP delivered with MDM Business content.

Similar Messages

Extract category attribute value desgin question

I created a search application which returns a result set of documents that have a custom category. I need to extract the values of the applied category. Right now I'm doing some looping a getting the requestedAttributes until i have the CUSTOM_ALL. I get the values using the internal names.
Document -> Categories -> CUSTOM_ALL -> Custom Attributes Values
Is there a better way to do this?

Unfortunately no, at least as far as I know. I wrote some procedures that I can use in all places where I need category information (procedures like getCatInfoFromFolder, mapInternalToDisplayNames, ....), it took me a while but it saved me a lot of time in later coding.
Pedja

Can we update the Category attribute values of a file

Can we update the Category attibute values of a file with out checkout the file?
I have set the version configuration to folder and try to update the category attribute values of a file under that folder,
It is asking to checkout the file before modifying the category attibute values.
Is it required to checkout the file before modifying the category attribute values of that file?
Is there any way to update the category attribute values without checkout the file?
Please help on this

One of the ways i can think of is using Batch Loader script for large number of files. Mention such files in Batch Loader script, and it will update category and all meta-data required in terms of next revision.
In case number of files are less manual checkout and check-in will help.

Category Attribute - Text

Dear MDM Experts,
I want to import a quite long text into a Category Attribute, but when I do the mapping in the Import Manager, the message says that the imported text is too long, and it will be cutted to 128 character.
Is there any solution for this problem? Can I change the type of this Category Attribute to Large Text, as it is possible by Fields in Console?
thanks,
Ádá

Hi Adam,
I have done a quick explore on this context and would like to share some information.
1. The Taxonomy metadata like Name,Alias,Definition of Attribute not physically present in the Console ( up to my knowledge ) - so it hard to change the data types...either we have to go with 128 or split the actual text into Name and Alias.
2. Even Data manager import also not supporting the Definition import since its not recognized field by MDM..
eagar to know what other experts says ....
thanks
Alexander

Value . . is not permitted for attribute Date of Manufacture Message no. COM_PRCAT020

Hi
We are using CRM 7 ehp2 system we are facing a problem some equipment number is not updating from ECC to CRM.
showing following bdoc error message.
Value . . is not permitted for attribute Date of Manufacture
Message no. COM_PRCAT020
Diagnosis
You want to specify that the value . . is allowed for the attribute Date of Manufacture. However, in attribute maintenance or in the higher-level category ('parent category'), you specified that the value . . is not allowed for this attribute.
Error when creating objects
Message no. IB_CRM_UPLOAD_MSG019
Error when creating products from equipment BDoc
Message no. IB_CRM_UPLOAD_MSG012
Error when creating objects
Message no. IB_CRM_UPLOAD_MSG019
Error calling the upload BAdI; method: perform_load
Seeking your help for resolving this issue.
Best Regards
Manoj

Hi Manoj,
Refer to the KBA 1880999
This should be useful in resolving the issue.
Best Regards,
Gervase

AFS Elementary Field Extraction (Category Fields)

Hello Guru's,
I have a problem of extracting category fields. The problem is in the mapping of Characteristics (Category) to the Elementary fields in the R3 AFS BW interface. For an example if you take the category characteristic 'Quality" it has two elementary fields,
Stock(J_3ABWEL_QUAL ) & Requirement(J_3ABWEL_QUAL_R). But the problem in R3 is, there is only ONE Characteristic available for "Quality". In the AFS BW interface it is not possible to map one Characteristic into two Elementary Fields.
Please let me know how to handle this.
Any thoughts will be greatly appreciated.
Thanks
RJ

Hi AFS Gurus,
Could you please help me out?
Cheers,
DM

My Iphone was sync with Itunes on a computer then this computer broke down and i purchased another one. I was able to extract all the data from the old one. now how can i sync my phone with the new tunes without loosing any data?

My Iphone was sync with Itunes on a computer then this computer broke down and i purchased another one. I was able to extract all the data from the old one. now how can i sync my phone with the new tunes without loosing any data?

Yes, windows to Mac too.
iTunes: How to move [or copy] your music [library] to a new computer [or another drive] - http://support.apple.com/kb/HT4527
Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the library.
Windows users see tip at: https://discussions.apple.com/message/18879381

Extract work order data from r/3 system in flat file(csv)and export to BI

Hi,
I am new in interface.
I need to extract data regarding actual cost and quantities of work assigned to Service Providers from SAP system and send it to BI for reporting purposes.
This interface will extract Master data as well as transactional data. Extraction of Master data will be a full extract and that of transactional data will be Delta Extraction.
Custom development will extract the data from different fields and will export it to flat files (CSV format). This program will amalgamate all the flat files created into one big file and export it to BI system.
Export of data to BI system will be done by schedule program Control M, which will export the data from SAP system to BI system in batches. Control M is expected to run daily at night.
Please provide the step-by-step proces to do this.
Thanks
Suchi
Moderator message: anything else? please work yourself first on your requirement.
Edited by: Thomas Zloch on Mar 25, 2011 1:21 PM

Hi Ravi,
you've got to set up the message type MDMRECEIPT for the Idoc distribution from R/3 to XI. Check chapter 5.2 in the IT configuration guide available on <a href="http://service.sap.com/installmdm">MDM Documentation Center</a>. It describes the necessary steps.
BR Michael

Finding row attribute data in the debugger

Open a Row object in the debugger and you get an incredible tangle of data with non-explanatory names.
What I can't find is that actual attribute data that the Row holds. Is there any kind of general rule for finding it?

Hi,
I am not sure are you using spring framework or what. if yes you can populate data in command object in referenceData method of simpleformcontroller and that data will be available to the UI.

How to extract the historical data from R/3

hi
I am extracting data from R/3 through LO Extraction. client asked me to enhance the data source by adding field. i have enhanced the field and wrote exit to populate the data for that field.
how to extract the historical data into BI for the enhanced field. already delta load is running in BI.
regards

Hi Satish,
As per SAP Standard also the best way is to delete whole data from the cube and then load the data from set up tables as you have enhanced the data source.
After data source enhancement it is supported to load normally because you don't get any historical data for that field.
Best way is to take down time from the users, normally we do in weekends/non-business hours.
Then fill the set-up tables; if the data is of huge volume you can adopt parallel mechanism like:
1. Load set-up tables by yearly basis as a background job.
2. Load set-up tables by yearly basis with posting periods from jan 1st to 31st dec of any year basis as a background job.
This can make your self easier and faster for load of set-up tables. After filling up set-up tables. You can unlock all users as there is no worries of postings.
Then after you can load all the data into BI first into PSA and then into Cube.
Regards,
Ravi Kanth.

How to extract 64 bit data from imaq image using IMAQ Extract VI

I have LV 8.5.1, Vision 8.5 and need to extract 64 bit data from a 64 bit image and I get the "invalid image" error while using the IMAQ Extract VI. What version of Vision do I need to allow me to do this?
Currently, the work-around I have...
1) convert the image to 32bit
2) use the ROI tools I to get the rectangle data I need
3) then go back to the original image and the convert the image to a 64 bit array
4) take the rectangle data to extract the data needed out of the 64 bit array data.
klunky but it works. I would think that the IMAQ Extract tool should allow me to extract the 64 bit data but it doesnt... forces me to 32 bit.
suggestions?

steve05ram360 wrote:
awesome, that does work.
Attached DLL slightly corrected and should be OK also "in place" when Dst is not connected like original IMAQ function. Hopefully it works properly now. By the way all IMAQ types are supported, not only U64.
Andrey.
Attachments:
ADVExtractDLL.zip ‏9 KB

Export Transient Attribute data to excel sheet (from Advance Table)

Hi,
I have an advanced table in which its columns mapped with both vo attributes(from database) and transient attributes. If i select 'Export Button' i need to export all data present in the advanced table to excel sheet.. But i am not able to export transient attribute data .. Can anyone help me to solve this problem...
Thanks,
Babu

Babu
You should be able to export any attribute from the VO, provided they are not hidden fields. Do the values appear on the screen? What is the field type on the advanced table of the attribute you are trying to export?
--Ritu

Category attributes default values updating

Hi,
I'm developing an application that, upon upload of a file to the specified root folder(through the application), reads some values from a file, creates a folder structure based on those values, and moves the file in the bottom folder. Now, a predefined category should be attached to the file, to enable search by category attributes. My idea is to set the category as required on that bottom folder (or the first), and modify it's attribute default values, so that the file inherits them when moved in it. I have found mshannon's examples in some other thread ( Updating a document with category metadata using updateDocument(): error! ), the first one works only with files, not folders, and the second one doesn't work for me at all, I get an error:
javax.faces.el.EvaluationException: ORACLE.FDK.AggregateError:ORACLE.FDK.AggregateError
here is my code:
public static void updateAttributes() throws FdkException, RemoteException{
login();
FileManager fm = s_WsCon.getFileManager();
Item fajl = fm.resolvePath(prop.getProperty("userhome") + "/root folder/folder1/readme1.txt",
null);
long docID = fajl.getId();
NamedValue[] catInstAtr = new NamedValue[] {
new NamedValue("CUSTOM_138297", "changed value for att1"),
new NamedValue("CUSTOM_138299", "changed value for att2")
NamedValue[] catDef = new NamedValue[] {
new NamedValue(Options.UPDATE_CATEGORY_ID,new Long(139054)),
new NamedValue(Options.CATEGORY_DEFINITION_ATTRIBUTES, catInstAtr)
NamedValue[] docDef = new NamedValue[] {
new NamedValue(Options.CATEGORY_DEFINITION, catDef)
AttributeRequest[] reqAtr = new AttributeRequest[]{
new AttributeRequest(Attributes.DESCRIPTION, null)
fajl = fm.updateDocument(docID, docDef, reqAtr);
logut();
This example is (I think) only for updating on document level, but I could use a solution for folder-level updating, as I explained before. Can anyone help me?
Thanks,
Pedja

Pedja,
Here is my code to get category from Folder this is updated version from sample code TestCategory2.java
1. It will get the required category of a folder.
2. gets the internal category attribute names
3. get Category id if uploading file along with category attribute values OR
updating file and also updating previous category instance values..
package oracle.ifs.examples.content.testcases;
import java.util.Map;
import java.util.Properties;
import java.util.*;
// Facade Objects
import oracle.ifs.fdk.AttributeRequest;
import oracle.ifs.fdk.Attributes;
import oracle.ifs.fdk.FdkConstants;
import oracle.ifs.fdk.FdkErrorCodes;
import oracle.ifs.fdk.FdkException;
import oracle.ifs.fdk.FdkExceptionEntry;
import oracle.ifs.fdk.Item;
import oracle.ifs.fdk.Options;
import oracle.ifs.fdk.NamedValue;
import oracle.ifs.fdk.NamedValueSet;
import java.io.File;
import java.io.FileInputStream;
import java.io.FileNotFoundException;
import java.io.FileOutputStream;
import java.io.IOException;
import HTTPClient.HTTPConnection;
import HTTPClient.HTTPResponse;
import HTTPClient.HttpOutputStream;
import java.io.InputStream;
import java.io.OutputStream;
import java.net.URL;
// Web Services Managers
import oracle.ifs.fdk.CategoryManager;
import oracle.ifs.fdk.CommonManager;
import oracle.ifs.fdk.FileManager;
// Framework
import oracle.ifs.examples.content.fdk.FdkSession;
import oracle.ifs.examples.content.fdk.FdkUtils;
import oracle.ifs.examples.content.fdk.Managers;
import oracle.ifs.examples.content.fdk.constants.ItemAttributes;
import oracle.ifs.examples.content.fdk.constants.NamedValueConstants;
import oracle.ifs.examples.content.testcases.AbstractTest;
public class TestCategories3
implements ItemAttributes, NamedValueConstants
public TestCategories3()
public static void main(String[] args)
TestCategories3 tc3= new TestCategories3();
tc3.getCatinfo();
* This is where you write your test program.
public void getCatinfo()
log(this.getClass().getName()+": starting");
FdkSession session = null;
try
AttributeRequest[] requestedAttributes = null;
NamedValue[] sortOptions = null;
Map returnedAttrs = null, map = null;
log("\nAuthenticating as regular test user ...");
session = new FdkSession("http://xxx.com:8320/content/","anakkala","sample");
CommonManager commonM = Managers.getCommonManager(session);
CategoryManager categoryM = Managers.getCategoryManager(session);
FileManager fileM = Managers.getFileManager(session);
// save this attribute request so that it can be used later
AttributeRequest[] AR_CATEGORY_CONFIGURATION_ATTRIBUTES =
FdkUtils.newAttributeRequestArray(Attributes.CATEGORY_CONFIGURATION,
FdkUtils.newAttributeRequestArray(new Object[]
// Is the category configuration enabled
FdkUtils.newAttributeRequest(Attributes.CONFIGURATION_ENABLED),
// Can the category configuration be overridden or is it final
FdkUtils.newAttributeRequest(Attributes.CONFIGURATION_FINAL),
// What are the required categories for the category configuration
FdkUtils.newAttributeRequest(Attributes.REQUIRED_CATEGORIES,
// for the required categories ...
FdkUtils.newAttributeRequestArray(new Object[]
// What is the category classobject display name
FdkUtils.newAttributeRequest(Attributes.DISPLAY_NAME),
// get attributes inherited and introduced by category object
FdkUtils.newAttributeRequest(Attributes.METADATA_ATTRIBUTES,
// get full settings for each of these attributes
FdkUtils.newAttributeRequestArray(METADATA_ATTRIBUTE_ATTRIBUTES)
// Are there any attribute overrides for this category config?
FdkUtils.newAttributeRequest(Attributes.ATTRIBUTE_OVERRIDES,
// get full settings for each of these attribute overrides
FdkUtils.newAttributeRequestArray(ATTRIBUTE_OVERRIDE_ATTRIBUTES))
log("\nLooking up folder /d-rco/C1/L1/folder1 ...");
// convert attribute request map to AttributeRequest[]
requestedAttributes = AR_CATEGORY_CONFIGURATION_ATTRIBUTES;
Item folder =fileM.resolvePath(
"/d-rco/C1/L1/folder1",
requestedAttributes);
log("folder id is="+folder.getId());
log("\nProcessing requested attributes - goal: generate override ...");
//returns a map
returnedAttrs = FdkUtils.getAttributesMap(folder);
Item categoryConfig = (Item)
returnedAttrs.get(Attributes.CATEGORY_CONFIGURATION);
returnedAttrs = FdkUtils.getAttributesMap(categoryConfig);
// is CategoryConfiguration enabled?
Boolean ccEnabled = (Boolean) returnedAttrs.
get(Attributes.CONFIGURATION_ENABLED);
// is CategoryConfiguration final? false=subfolders can override
Boolean ccFinal = (Boolean) returnedAttrs.
get(Attributes.CONFIGURATION_FINAL);
// what are the attribute overrides for this category configuration
log("\nAttribute overrides ...");
Item[] attributeOverrides = (Item[]) returnedAttrs.
get(Attributes.ATTRIBUTE_OVERRIDES);
FdkUtils.log(attributeOverrides);
// what are the requred categories for this category configuration
log("\nRequired categories ...");
Item[] reqCategories = (Item[]) returnedAttrs.get(Attributes.REQUIRED_CATEGORIES);
FdkUtils.log(reqCategories);
log("After printing required categories");
if(ccEnabled.booleanValue() && !ccFinal.booleanValue()
&& reqCategories != null && reqCategories.length >= 1)
// Folder /<domain>/<basecontainer>/L1/F3.EC has an enabled category
// configuration that can be overridden and has required categories
// present ...
Item category = null;
for (int i=0; i < reqCategories.length; i++)
returnedAttrs = FdkUtils.getAttributesMap(reqCategories);
log( "xxx name="+((String) returnedAttrs.get(Attributes.DISPLAY_NAME) ));
if ( ((String) returnedAttrs.get(Attributes.DISPLAY_NAME)).
equals("BG_Serv_Req"))
category = reqCategories[i];
break;
log("category id="+category.getId());
if (category != null)
NamedValue[] internalCategoryAttrs = null;
try {
internalCategoryAttrs =getInternalCategoryAttrNames("BG_Serv_Req",session);
}catch(Exception e)
log("error getting internal names");
e.printStackTrace();
log("Category Attribute internal Name ="+ (String)internalCategoryAttrs[0].getValue());
log("Category Attribute internal Name ="+ (String)internalCategoryAttrs[1].getValue());
NamedValue[] categoryInstanceAttributes = new NamedValue[] {
// use the internal attribute name for all attributes
new NamedValue((String)internalCategoryAttrs[0].getValue(), "XNXNXNXN 234"),
new NamedValue((String)internalCategoryAttrs[1].getValue(), "SNKKSKSK 1234")
NamedValue[] categoryDef = new NamedValue[] {
// the id of the category object class for which this new category will be an
//instance of
new NamedValue(Options.CATEGORY_CLASS_ID, new Long(category.getId())),
// the updated values of the category instance
new NamedValue(Options.CATEGORY_DEFINITION_ATTRIBUTES, categoryInstanceAttributes)
String sourceFile="test.doc";
String folderPath = "C:\\upload";
requestedAttributes = FdkUtils.newAttributeRequestArray(Attributes.URL);
Item doc = fileM.resolveRelativePath(folder.getId(),sourceFile, requestedAttributes);
log("START ORACLE TEST CODE FROM TAR");
// this will get the category instance id
AttributeRequest categoryAR = new AttributeRequest();
categoryAR.setAttributeName(Attributes.CATEGORIES);
AttributeRequest[] attrRequests = new AttributeRequest[]
{ categoryAR};
Item myDoc = commonM.getItem(doc.getId(), attrRequests);
NamedValue[] requestedAttributesNV = myDoc.getRequestedAttributes();
int length = requestedAttributesNV == null ? 0 :
requestedAttributesNV.length;
Item[] itemCategories = null;
log("length="+length);
for (int i = 0; i < length; i++)
log("requestedAttributesNV[i].getName()="+requestedAttributesNV[i].getName());
if(requestedAttributesNV[i].getName().equals(Attributes.CATEGORIES))
itemCategories = (Item[]) requestedAttributesNV[i].getValue();
length = itemCategories == null ? 0 : itemCategories.length;
log("length="+length);
long categoryInstanceId = 0;
for (int i = 0; i < length; i++)
log("Category instance " + itemCategories[i].getName() + " has id " +
itemCategories[i].getId());
categoryInstanceId = itemCategories[i].getId();
log("END ORACLE TEST CODE FROM TAR");
/* If the document does not exist in OCS */
if (doc == null) {
requestedAttributes = FdkUtils.newAttributeRequestArray(Attributes.URL);
NamedValue[] nvdoc = FdkUtils.newNamedValueArray(
new Object[][] { { Attributes.NAME,sourceFile} }
Item def = fileM.createDocumentDefinition(nvdoc,requestedAttributes);
int uploadStatusCode = uploadContent(
session,
getSampleFileStream(sourceFile,folderPath),
(String) FdkUtils.getAttribute(def,Attributes.URL)
log("Upload Status to definition file: "+uploadStatusCode);
nvdoc = FdkUtils.newNamedValueArray(
new Object[][]
{ Attributes.NAME,sourceFile},
{ Options.USE_SAVED_DEFINITION, new Long(def.getId())},
{ Options.DESTFOLDER, new Long(folder.getId()) },
// apply category instance informationnew
{ Options.CATEGORY_DEFINITION, categoryDef }
requestedAttributes = FdkUtils.newAttributeRequestArray(Attributes.URL);
doc = fileM.createDocument(nvdoc,null,requestedAttributes);
}else /* if document already exist in OCS */
          log(sourceFile+" file exists so updating ...");
int uploadStatusCode = uploadContent(
session,
getSampleFileStream(sourceFile,folderPath),
(String) FdkUtils.getAttribute(doc ,Attributes.URL)
log("uploadStatusCode="+uploadStatusCode);
FileInputStream fi= getSampleFileStream(sourceFile,folderPath);
log("category id using in update="+ category.getId());
NamedValue[] updatecatdef = new NamedValue[] {
//new NamedValue(Options.UPDATE_CATEGORY_ID, new Long(category.getId())),
new NamedValue(Options.UPDATE_CATEGORY_ID, new Long(categoryInstanceId)),
new NamedValue(Options.CATEGORY_DEFINITION_ATTRIBUTES,
new NamedValue[] {
new NamedValue((String)internalCategoryAttrs[0].getValue(), "AH234 V2"),
new NamedValue((String)internalCategoryAttrs[1].getValue(), "SNHGZ12 V2")
NamedValue[] nv = FdkUtils.newNamedValueArray(
new Object[][]
{ Attributes.NAME,sourceFile},
{ Attributes.DESCRIPTION,"Sample file"},
//{Options.CONTENTSTREAM, fi},
{ Options.CATEGORY_DEFINITION, updatecatdef }//Newly added for category upload
requestedAttributes = FdkUtils.newAttributeRequestArray(Attributes.URL);
// THIS IS WHERE WE ARE GETTING ERROR
fileM.updateDocument(doc.getId(),nv,requestedAttributes);
System.out.println("doc = fm.updateDocument is complete ........." );
} // end if (Document Confidentiality category present)
} // end if category configuration enabled / overridable etc
catch (FdkException fe)
FdkUtils.log(fe);
fe.printStackTrace();
catch (Exception e)
// java.net.MalformedURLException;
// java.rmi.RemoteException;
// javax.xml.rpc.ServiceException;
// org.apache.axis.AxisFault
log("Fatal exception occurred in run():");
e.printStackTrace();
finally
if (session != null)
session.disconnect();
log("\n"+this.getClass().getName()+": ending");
private FileInputStream getSampleFileStream(String filename,String path)
throws FileNotFoundException
FileInputStream stream = null;
if (filename != null && filename.length() >= 1)
if (path.length() >=1 && !path.endsWith("/"))
path += "/";
stream = new FileInputStream(new File(path+filename));
return stream;
public int uploadContent(
FdkSession session,
InputStream inputStream,
String destinationURL
throws Exception
int statusCode = -1;
if (inputStream == null) return statusCode;
HTTPConnection conn = null;
try
URL url = new URL(destinationURL);
conn = session.getHttpConnection(url);
byte[] buffer = new byte[8192];
int count=0;
HttpOutputStream outputStream = new HttpOutputStream();
HTTPResponse response = conn.Put(url.getFile(), outputStream);
try
while ((count = inputStream.read(buffer)) != -1)
outputStream.write(buffer, 0, count);
finally
outputStream.flush();
outputStream.close();
statusCode = response.getStatusCode();
finally
if (inputStream != null)
inputStream.close();
if (conn != null)
conn.stop();
conn = null;
return statusCode;
// Handle the response. Note that a successful response may not be
// 200, but may also be 201 Created, 204 No Content or any of the other
// 2xx range responses.
public void log(String s)
System.out.println(s);
public NamedValue[] getInternalCategoryAttrNames(String categoryName,FdkSession session) throws Exception
NamedValue[] returnNV = null;
Map attmap = new HashMap();
               attmap.put(Attributes.METADATA_ATTRIBUTES,
               FdkUtils.newAttributeRequestArray(
               new String[] { Attributes.ATTRIBUTE_NAME,
               Attributes.DISPLAY_NAME }));
               AttributeRequest[] request = FdkUtils.getAttributeRequestArray(attmap);
               Item cat = FdkUtils.getCategoryObject(session, null, categoryName, request);
log("inside method cat id="+cat.getId());
/** ANAKKALA START **/
NamedValue[] catNV = cat.getRequestedAttributes();
if( catNV != null && catNV.length >0)
for (int i=0; i<catNV.length; i++)
if(catNV[i].getName().equals("METADATA_ATTRIBUTES"))
//log("** CatNV.getName="+catNV[i].getName()+" value="+catNV[i].getValue());
Item[] meta = (Item[]) catNV[i].getValue();
log("meta length="+meta.length);
returnNV = new NamedValue[meta.length];
for (int j=0; j<meta.length; j++)
log("--Item getname="+meta[j].getName()+" value="+meta[j].getId()+" gettype="+meta[j].getType()+" gettypedesc="+meta[j].getTypeDesc());
returnNV[j] = new NamedValue(meta[j].getName(),meta[j].getName());
NamedValue[] metaNV = meta[j].getRequestedAttributes();
log("---metaNV length="+metaNV.length);
for(int k=0; k<metaNV.length; k++)
log("------metaNV.getName="+metaNV[k].getName()+" value="+metaNV[k].getValue());
/** ANAKKALA END **/
//NamedValue[] ret = null;
return returnNV;

Unable to extract Customer Master data from MDC

Hello,
We creating an MDM-XI-ERP2005 Customer scenario. We want to work with all bussiness scenarios (not customizing scenario).
First I'm trying to extract Customer Master Data from EP 2005 using MDM_CLNT_EXTR.
I have created a New Variant which properties are:
Variant: CUSTOMER_TOTAL
Description: Send all customer data to MDM
Extraction Object: CUSTOMER_EXTRACT.
Target System: PI7.
But, the display jobs shows the following error: Could not determine recipients for message type MDMRECEIPT. Job cancelled after system exception.
We need to focus the problem. We have done the following ALE configuration.
SALE transaction:
In Basic Settings -> Logical Systems -> Define Logical System we have add the following logical systems:
              EUS100
              MDM: Master Data Management
              PI7: Process Integration 7.0
WE21:
Transactional RFC -> PI7, IDOC record types SAP Release 4.x
RFC destination: SAPSLDAPI
BD64
New Model -> PFMC
Add message type: Model iview: PFMC
                             Sender: EUS100
                              Receiver: PI7
                             Message Type: DEBMDM
WE20 transaction shows:
Partner profiles -> Partner Type LS (logical system)
                    PI7: Outbound parmtrs. DEBMDM, SYNCH.
Any idea will be very helpful,
Thanks in advance
Marta.
Edited by: Marta Sánchez on Jul 9, 2008 12:34 PM

Sorry because I made a mistake in my previous message. ALE seems to be correctly configured. I'll try to update correctly my current situation:
In WE02 I can see al IDOCs that I'm trying to send to XI. All them have the IDoc Status = 3 (Data Passed to Port OK) instead of 12 Status Dispatch OK :(. So, It seems an tRFC error.
SM58 shows me more trails: "Basic type 'DEBMDM06' is unknown"
before that I have done the following steps at SAP ERP:
    1. WE21: I have created a PI7 port with 700PI70CLNT RFC.
    2. SM59: I have checked successfully 700PI70CLNT RFC connection.
    3. WE20: I have created a PI7 Partner Type LS with the following inbound and outbound parameters: DEBMDM and MDMRECEIPT.
    4. BD64: I have created a Distribution Model with DEBMDM and MDMRECEIPT message types.
and at SAP PI:
     5.IDX: Port: SAPEUS. Client: 111. RFC Destination: PI7.
     6. technical and business system for sender SAP system(System Landscape Directory)...
- Maybe some of the previous steps is not correct....
- Is RFC Destination = PI7 is correct in step #5?
- Is also necessary to configure more steps in PI system like RFC destinations or Transactional port?
- I have read that is neccessary to check that the option "transfer idoc immediately" in we20. How?
Please any idea will be very helpful.......
Thank you!
Best regards,
Marta.

Extract Range of Data / Waveform Zoom

I have an NRF recording file with several channels. What I need to do is visualize the data and then extract a small part of the waveforms into a TDM or Matlab file. I actually managed to get all this done in DIAdem, but in a most cumbersome way:
1) Import NRF file into the Data Portal using the DataPlugin
2) Convert all signal channels to Waveform channels (using the function in the ANALYSIS module)
3) Display the waveforms in the VIEW module
4) Zoom downto the sample level in order to figure out where to start and stop the extraction
5) Write down the start/stop x-coordinates (i.e. XStart, XEnd)
6) Switch to the ANALYSIS module and generate a numeric channel with "First value" = Xstart, "Last value" = XEnd and "No. of values" = (XEnd - XStart)/SampleTime
7) Use "Linear Mapping..." to extract the desired data
8) Convert the extracted data to a waveform channel
9) Export data to desired file format
Now for my questions:
* I'm using DIAdem 10.0 (Base Edition) and would like to know if there is not a much simpler way of getting this job done, i.e. selecting two points on a waveform, click one button and get the data between those points as a new waveform in the Data Portal (ideally for several waveforms in parallel)
* Isn't there any way of zooming out one step in the waveform viewer? I only found zoom on/off which is a rather crude way for navigating)
* Are there any news regarding the topic in the thread "Selecting a range of data from a file" (last posts date back to February 2005)
Any help is greatly appreciated. Thanks

Hi,
* How can I run a VBS script with my Base Edition: the whole Script feature is disabled, but I was under the impression that I can run scripts (just not edit/debug)
... with an Link on the Desktop from your DIAdem. In Properties of this Link, you can set the Parameter:
"DIAdem.exe" "/cScriptStart('MyScript')"
... with the start Script in every Module in DIAdem. Have a look at the Screenshot.
* Isn't there any way of zooming out one step in the waveform viewer? I only found zoom on/off which is a rather crude way for navigating
... I´m sorry Zoom out isn´t anywhere! But you can make it like the second picture. With the upper Graph, you an control what you see in the second Graph. Zoom In/Out, no Problem
* Also how can I precisely (down to the sample level) place the two band cursors? Using the different zoom modes I manage to do it for one of the two cursors, but not the other one.
Sorry, I don´t understand your question! Perhaps you can precisely set you Cursor with the Coordinat Window? Have a look!
Best regards
Alex
Attachments:
Start Script.gif ‏6 KB
Zoom.gif ‏55 KB

Extract Category, Attributes data in Multilingual

Similar Messages

Maybe you are looking for