Extract First Entry from Hash Table, Place into Variable

Hello,
I want Powershell to query a property and then extract the first entry of that property and place into a variable. How would I do that?
The command is:
Get-CsRgsAgentGroup -Identity service:ApplicationServer:server.company.net -Name "Dispatch" | fl -Property AgentsByUri
The output is: 
AgentsByUri:{sip:[email protected],sip:variable2@company,sip:[email protected]}
So, I would like the entry "sip:[email protected]", to be pulled into a variable.
Thanks in advanced!

If I run this without the $Variable, I at least return this output which is a good sign, though still throws back an error.
When run with the $Variable, I just get back the error alone. We are on the right track.
Get-CsRgsAgentGroup -Identity service:ApplicationServer:server.company.net -Name "Dispatch" | Select -ExpandProperty AgentsByUri | Select -First 1
AbsolutePath   : [email protected]
AbsoluteUri    : sip:[email protected]
LocalPath      : [email protected]
Authority      :
HostNameType   : Unknown
IsDefaultPort  : True
IsFile         : False
IsLoopback     : False
PathAndQuery   : [email protected]
Segments       : {[email protected]}
IsUnc          : False
Host           :
Port           : -1
Query          :
Fragment       :
Scheme         : sip
OriginalString : sip:[email protected]
DnsSafeHost    :
IsAbsoluteUri  : True
UserEscaped    : False
UserInfo       :
Get-CsRgsAgentGroup : The pipeline has been stopped.
At line:1 char:1
+ Get-CsRgsAgentGroup -Identity service:ApplicationServer:server.company.net -Name " ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : NotSpecified: (:) [Get-CsRgsAgentGroup], PipelineStoppedException
    + FullyQualifiedErrorId : Microsoft.Rtc.Rgs.Management.GetOcsRgAgentGroupCmdlet
Thank you so much for your help!

Similar Messages

  • How to get values from Hash Table

    Hi all,
    I have a hash table "lovResults" craeted with following code -
    String lovInputSourceId = pageContext.getParameter(SOURCE_PARAM);
    Hashtable lovResults = pageContext.getLovResultsFromSession(lovInputSourceId);
    values which I can see through SOP are - ******Value of lovResults is{roleid=1000, domainFV=CREATIVE, Role=Account Director}
    How can I get the domain value "domainFV=CREATIVE" from hash table in a variable because I have to set this vaue in another field.
    Please help me ASAP
    Thanks
    Amit

    Hi Amit ,
    Since you are successfully printing the values using sop's , please try this code
    Capture the value in controller .
    if(oapagecontext.getParameter("domainFV") != null)
    String formvalue= oapagecontext.getParameter("domainFV") // ensure hashtable id is correct
    Keerthi
    Edited by: keerthioaf on Nov 26, 2012 8:46 PM

  • Copy selected values from a table control into another table control

    hi there,
    as seen in the subject i need to copy selected values from a table control into another table control in the same screen. as i dont know much about table controls i made 2 table controls with the wizard and started to change the code... right now im totally messed up. nothing works anymore and i don't know where to start over.
    i looked up the forums and google, but there is nothing to help me with this problem (or i suck in searching the internet for solutions)
    i have 2 buttons. one to push the selected data from the top table control into the bottom tc and the other button is to push selected data from the bottom tc into the top tc. does somebody has a sample code to do this?

    you're funny
    i still don't get it... can't believe, there is no tutorial or sample code around how to copy multiple selected rows from a tc.
    here's my code, maybe you can tell me exactly were i have to change it:
    tc1 = upper table control
    tc2 = lower table control
    SCREEN 0100:
    PROCESS BEFORE OUTPUT.
      MODULE status_0100.
      MODULE get_nfo. --> gets data from the dictionary table
      MODULE tc1_change_tc_attr.
      LOOP AT   it_roles_tc1
           INTO wa_roles_tc1
           WITH CONTROL tc1
           CURSOR tc1-current_line.
      ENDLOOP.
      MODULE tc2_change_tc_attr.
      LOOP AT   it_roles_tc2
           INTO wa_roles_tc2l
           WITH CONTROL tc2
           CURSOR tc2-current_line.
      ENDLOOP.
    PROCESS AFTER INPUT.
      LOOP AT it_roles_tc1.
        CHAIN.
          FIELD wa_roles_tc1-agr_name.
          FIELD wa_roles_tc1-text.
        ENDCHAIN.
        FIELD wa_roles_tc1-mark
          MODULE tc1_mark ON REQUEST.
      ENDLOOP.
      LOOP AT it_roles_tc2.
        CHAIN.
          FIELD wa_roles_tc2-agr_name.
          FIELD wa_roles_tc2-text.
        ENDCHAIN.
        FIELD wa_roles_tc2-mark
          MODULE tc2_mark ON REQUEST.
      ENDLOOP.
      MODULE ok_code.
      MODULE user_command_0100.
    INCLUDE PAI:
    MODULE tc1_mark INPUT.
      IF tc1-line_sel_mode = 2
      AND wa_roles_tc1-mark = 'X'.
        LOOP AT it_roles_tc1 INTO g_tc1_wa2
          WHERE mark = 'X'.    -
    > big problem here is, that no entry has an 'X' there
          g_tc1_wa2-mark = ''.
          MODIFY it_roles_tc1
            FROM g_tc1_wa2
            TRANSPORTING mark.
        ENDLOOP.
      ENDIF.
      MODIFY it_roles_tc1
        FROM wa_roles_tc1
        INDEX tc1-current_line
        TRANSPORTING mark.
    ENDMODULE.                    "TC1_MARK INPUT
    MODULE tc2_mark INPUT.
      IF tc2-line_sel_mode = 2
      AND wa_roles_tc2-mark = 'X'.
        LOOP AT it_roles_tc2 INTO g_tc2_wa2
          WHERE mark = 'X'.             -
    > same here, it doesn't gets any data
          g_tc2_wa2-mark = ''.
          MODIFY it_roles_tc2
            FROM g_tc2_wa2
            TRANSPORTING mark.
        ENDLOOP.
      ENDIF.
      MODIFY it_roles_tc2
        FROM wa_roles_tc2
        INDEX tc2-current_line
        TRANSPORTING mark.
    ENDMODULE. 
    thx for anybody who can help with this!

  • Deleting entry from internal table

    Hi Experts,
    i have the following internal table:
    data :    it_result1            TYPE   crmt_object_guid_tab
    and work area
    data : wa_result1 type crmt_object_guid.
    i have to delete a guid from internal table based on some condition.
    loop at it_resul1 into wa_result1
    if lv_priority eq priority.
    delete     this entry from internal table.
    endif.
    endloop..
    i tried using  delete table it_result with table key CRMT_OBJECT_GUID = wa_result. but this is giving syntax error.
    what should be done to delete the entry?
    Thanks and regards
    Shilpi

    Hi
    Check Syntax for DELETE operator on pressing F1
    1. DELETE itab.
    2. DELETE TABLE itab WITH TABLE KEY k1 = v1 ... kn = vn.
    3. DELETE TABLE itab [FROM wa].
    4. DELETE itab INDEX idx.
    5. DELETE itab FROM idx1 TO idx2.
    6. DELETE itab WHERE logexp.
    7. DELETE ADJACENT DUPLICATES FROM itab.
    delete table it_result with table key CRMT_OBJECT_GUID = wa_result
    this is wrong
    delete  it_result where CRMT_OBJECT_GUID = wa_result
    Edited by: Lavanya K on Apr 22, 2009 10:20 AM

  • Delete entry from Database table

    Hi,
    I configured one PCR scenerio in SPRO node -> business Packakes/ funtional packages-> Manager self service-> Personal Change request -> Group Change request scenerio.
    later I deleted that entry in backend, but still the same entry exist in db table "TWPC_PCR_Groups" .
    How can we delete that entry?
    thanks

    Hi,
    If you just want to delete a single entry from database table then you have to it in debug mode .
    go to se11->Give table name->Press F7( ie: display table entries)-> Goto the table contents (CTRLSHIFTF10)->Select the entry you want to delete->Give /H in the command bar ->enter into debug mode-> Give code as DELE -> save it. and press enter. Your entry will be deleted from database.
    Hope this helps..

  • How do I make data from one Table flow into a separate Table

    How do I make data from one Table flow into a separate Table in iworks numbers?

    Great stuff Yvan,
    KOENIG Yvan wrote:
    Here you may see the way to transfer the contents of a column of Table A in a column of Table B
    I used two kinds of formulas.
    In the cell A2 of Table B
    the formula is :
    =Table A :: $B2
    It may be :
    =Table A :: $B
    Apply Fill Down
    Copy paste it in cell A1 which is in a header row.
    This formula does its duty but it’s not robust enough and will not survive to a Sort.
    This is why in B2, I inserted a more robust formula :
    =OFFSET(Table A :: $A$1,ROW()-1,2)
    You will find details about the functions used in Numbers User Guide delivered with every copy of iWork ‘08
    Yvan KOENIG (VALLAURIS, France) samedi 6 août 2011 17:45:22
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
    My iDisk is : <http://public.me.com/koenigyvan>
    Please : Search for questions similar to your own before submitting them to the community
    To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !
    The first suggestion was the simple answer I needed,
    Thank you

  • Entries from database table

    Hi all,
    I need to fetch the first record from a data base table. I don't have any primary keys. Infact without using any primary keys i just need to select the first records from the table.
    I have used select single and select up to 1 rows (I should not use order by primary), some times it gives me the correct result and sometimes not.
    Can you tell me any other way to do it.
    Thanks.
    Mungala.

    Hi Praveena,
    Can you try
    SELECT * from DBtable....
    <b>if sy-subrc = 0.
    exit.
    endif.
    ENDSELECT.</b>
    Reward points if useful.
    Regards,
    Atish

  • Removal of  Developer Key entry from DEVACCESS Table.

    Hi,
    On table DEVACCESS, in QTY/DEV/Prod there is one person with Developer Key listed that I would like to remove,  User is no more working and now we want to delete the entry from this table which has the User name followed by the Developer key assigned.
    Could any one guide me in deleting the Developer Key access from the DEVACCESS table.
    Satish.

    Another alternative is to use SE11 to create a maintenance view (ex: ZV_DEVACCESS).  Secure the maintenance view with a custom authorization group.  With the maintenance view you have the ability to use SM30 to maintain the DEVACCESS data.
    That keeps the DEVACCESS table from changing and thus no need to register the change with SAP.
    Cheers,
    Brian

  • Delete entries from Database table  t71inp1

    Hi,
    I want to Delete entries from Database table  t71inp1. Its a H R Table. I want to know the exact code.
    i saw the cide delete bkpf where usnam = p_name.
    Will it work the same here. Also.
    Please let me know.
    I hope to get reply from you soon.
    where should i write the code. i.e. Tcode SE38 and directly deeleting write the code.
    Please give me some inputs. I am new to H R ABAp
    Shivakumar K B
    919886920258

    hi
    You can write a program in se38.
    create a program.
    use delete from t71inp1 where<condition> command in it.

  • Error occured while extracting the data from BSIK Table

    Hi Experts,
    I am trying to extract the data from "BSIK"  by using generic extraction by table, I am getting the error "Invalid extractiion Structure template BSIK of Data source XXXXXX", But when i am trying the same by using VIEW, i am able to do it,
    I am getting same problem while extracting the data from other tables like "BSIK, BSAK.........."
    can some one explain me why it is throughing some error when i am doing generic extraction by using Table,
    Thanks,

    Hi,
    Can you check below link:
    Invalid extract structure template ZBW_VW_EKES of DataSource ZBW_SCN_VENDOR
    Hope this answer your question!
    Regards,
    Nilima

  • Is there any BAPI or function module  to delete entries from a table (VBAK)

    Hi Everybody,
    this is my first thread in SDN...
    my problem follows...
    A report is be created that selects all sales orders created by e-Sales that are more than 20 minutes old and still have a delivery block:
    tables:
    VBAK     sales document: header data
    selection fields:
    VBAK-LIFSK      &#8800;     <BLANK>
    VBAK-ERNAM     =     userID used by e-Sales / IVE
              (EP-BATCH / EAI-BATCH)
    VBAK-ERDAT      <=     Current system Date
    VBAK-ERZET     <=     Current system Time - 20 minutes
    These orders should be deleted from SAP system.
    This report should be scheduled to run regularly every 10 minutes.
    my doubt : is ther any BAPI or Function module to delete entries from a standard table...if no what is the way to delete the enteries from a std table...
    best replies will be rewarded....
    regards
    Reddy

    Hi Vasanth ,
    thanks for your reply.
    i tried in the same manner what u mentioned.
    but how to pass only one parameter to the functionmodule..
    here in this case we have to pass only update flag as 'D'..
    i did the same it giving dump..
    An exception occurred that is explained in detail below.                          
    The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was      
      not caught and                                                                   
    therefore caused a runtime error.                                                 
    The reason for the exception is:                                                  
    The call to the function module "BAPI_SALESORDER_CHANGE" is incorrect:                                                                               
    In the function module interface, you can specify only                            
    fields of a specific type and length under "ORDER_HEADER_INX".                    
    Although the currently specified field                                            
    "INT_ORDER_HEADER_INX" is the correct type, its length is incorrect.              
    my pgm :
    *& Report  YNEW_ORDER_DELETION
    REPORT  ynew_order_deletion.
    TABLES:vbak.
    PARAMETERS:
         p_lifsk LIKE vbak-lifsk DEFAULT '02'.
    SELECT-OPTIONS:
       s_lifsk FOR vbak-lifsk DEFAULT '10',
        s_ernam FOR vbak-ernam,
        s_erdat FOR vbak-erdat,"DEFAULT sy-datum.
        s_erzet FOR sy-uzeit.
    *PARAMETERS:
    p_erzet LIKE sy-uzeit.
       s_erdat like vbak-erdat,
       s_erzet like vbak-erzet.
    DATA:
       BEGIN OF int_final OCCURS 0,
            w_vbeln TYPE vbak-vbeln,
       END OF int_final.
    DATA:
      int_return LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
    DATA: int_order_header_inx LIKE bapisditmx OCCURS 0 WITH HEADER LINE.
    DATA:
      wf_time TYPE sy-uzeit.
    INITIALIZATION.
      s_ernam-low = 'KULKARMA'.
      s_ernam-sign = 'I'.
      s_ernam-option = 'EQ'.
      APPEND s_ernam.
    s_ernam-low = 'EAI-BATCH'.
    s_ernam-sign = 'I'.
    s_ernam-option = 'EQ'.
    APPEND s_ernam.
    wf_time = sy-uzeit - 1200.
    p_erzet = sy-uzeit - 1200.
    p_erzet-low = wf_time.
    APPEND s_erzet.
      int_order_header_inx-updateflag = 'D'.
      APPEND int_order_header_inx.
    START-OF-SELECTION.
      SELECT vbeln FROM vbak
                       INTO TABLE int_final
                       WHERE lifsk EQ p_lifsk
                         AND ernam IN s_ernam
                         AND erdat IN s_erdat
                         AND erzet IN s_erzet.
      IF sy-subrc = 0.
        LOOP AT int_final.
          CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
            EXPORTING
              salesdocument         = int_final-w_vbeln
      ORDER_HEADER_IN             =
        order_header_inx            = int_order_header_inx
      SIMULATION                  =
      BEHAVE_WHEN_ERROR           = ' '
      INT_NUMBER_ASSIGNMENT       = ' '
      LOGIC_SWITCH                =
      NO_STATUS_BUF_INIT          = ' '
            TABLES
              return                      = int_return
      ORDER_ITEM_IN               =
      ORDER_ITEM_INX              =
      PARTNERS                    =
      PARTNERCHANGES              =
      PARTNERADDRESSES            =
      ORDER_CFGS_REF              =
      ORDER_CFGS_INST             =
      ORDER_CFGS_PART_OF          =
      ORDER_CFGS_VALUE            =
      ORDER_CFGS_BLOB             =
      ORDER_CFGS_VK               =
      ORDER_CFGS_REFINST          =
      SCHEDULE_LINES              =
      SCHEDULE_LINESX             =
      ORDER_TEXT                  =
      ORDER_KEYS                  =
      CONDITIONS_IN               =
      CONDITIONS_INX              =
      EXTENSIONIN                 =
        ENDLOOP.
        LOOP AT int_return.
          WRITE:/ int_return-type,
                  int_return-id,
                  int_return-number,
                  int_return-message.
        ENDLOOP.
      ENDIF.
    please help me ..its a very urgent issue to be solved...
    am waiting for ur reply...
    regards
    gangareddy

  • Get first entry of a table (return parameter of procedure)

    Hello Community,
    I created a procedure with a couple of projections and one join.
    The procedure returns the result as a parameter (o_result).
    In the calling procedure, I get the result.
    But I need to do further processing based on the first row of the result.
    Is this possible with SAP Hana SQL Script?
    Many thanks in advance.
    Regards, Rolf

    Hi Rolf,
    Your question is not very clear. May be you explain what you want to achieve after getting first entry of table.
    In your calling procedure you would make a call and bind the output table like this
    call proc1 ( :input_param, output_tab);
    On the returing output_tab you could just write something like
    output_top1 = select top 1 * from :output_tab;
    You could use this table for whatever processing you want to do further.
    If you want to get values into some scalar variables that is also possible.
    e.g
    declare lv_column1 nvarchar(10);
    select column1 into lv_column1 from :output_top1;
    Thanks
    Sagar

  • How do I extract matching records from two tables?

    I'm trying to extract client records from our client database to put together a very targeted email campaign. As an example, the result I want is a list of names and email addresses of those clients who have a record in our system, have not had a visit in our clinic in the last year, and live within 200 miles of our clinic. I can capture the first two criteria in one extract, and the second in another. I can then import those as tab delimited data into Numbers. What I then need to do is create a third table that represents ONLY those records that exist in both tables.
    Can someone tell me if this is possible and if so, how to do it?
    I'd be very appreciative of any help, thank you.

    conejo61 wrote:
    I can then import those as tab delimited data into Numbers. What I then need to do is create a third table that represents ONLY those records that exist in both tables.
    You can create a column that generates a serial marker on the table from which you want to transfer the data, making all the names that also appear on the other table. Not that the formula will mark only exact matches.
    Here's a short example:
    Table 1 on the left, is one of the two tables imported from the tab delimited data files. It has other data, but only the names in column A are used to identify records appearing on both tables.
    Table 2 on the right, contains the names and other data (represented by the email addresses in column B), to be transferred to the third table.
    Column C of this table contains the formula that counts off the rows containing names appearing on both tables. The version below is in C2, and is filled down to the end of the column.
    =IF(COUNTIF(Table 1 :: $B,A2)>0,MAX($C$1:C1)+1,"")
    Note that jane Doe is not counted (or transferred) as her name is recorded differently on the two tables.
    Table 3 is the results table. It contains one formula for each column to be transferred from Table 2 to Table 3.
    A2:   =IF((ROW()-1>MAX(Table 2 :: $C)),"",LOOKUP(ROW()-1,Table 2 :: $C,Table 2 :: $A))
    B2:   =IF((ROW()-1>MAX(Table 2 :: $C)),"",LOOKUP(ROW()-1,Table 2 :: $C,Table 2 :: $B))
    Regards,
    Barry
    EDIT: I was working in Numbers '09 when developing this, and got the following warning when I saved a copy as an iWork '08 document:
    Referencing row or column ranges that include header or footer cells isn't supported. The formula references were updated to exclude header and footer cells.
    The formulas in Table 2::C2 references C1. You may have to ensure that Table 2 does not include a header row.
    B.
    EDIT2: A check on the file in Numbers '08 showed no apparent change to the formula, and editing Jane Doe's name on table 1 resulted in her name being added to Table 3.
    Message was edited by: Barry

  • Unable to remove recycle bin entries from user_constraints table

    When I do select * from user_constraints table I get few entries like BIN$HY86N3B2RQi/1ODAiR9CTw==$0.
    I have tried purging the recycle bin many times but these entries are still there. When i try to read the database information from my code(JDBC Connection) these keys are being read and generating erroneous results.
    One more important thing. When i tried to rename these keys, they are getting generated again. Any help on this issue will be very helpful to me. Thanks in advance.

    >
    When i tried to rename these keys, they are getting generated again
    >
    What does this mean? Show us the statement you used to do the rename.
    >
    its not present in the recycle bin but it is present in the table user_constraints only. when i do a select * from user_constraints i get two entries where the constraint_name is like this BIN$.........
    >
    Exactly - once you flashback the table the constraints aren't in the recycle bin so you can't purge them from it. But you can rename these if you own them. You don't have to be SYS.
    See the 'Notes on Flashing Back Dropped Tables in the SQL reference
    http://docs.oracle.com/cd/B28359_01/server.111/b28286/statements_9012.htm
    >
    Notes on Flashing Back Dropped Tables The following notes apply to flashing back dropped tables:
    •Oracle Database retrieves all indexes defined on the table retrieved from the recycle bin except for bitmap join indexes. (Bitmap join indexes are not put in the recycle bin during a DROP TABLE operation, so cannot be retrieved.)
    •The database also retrieves all triggers and constraints defined on the table except for referential integrity constraints that reference other tables.
    The retrieved indexes, triggers, and constraints have recycle bin names. Therefore it is advisable to query the USER_RECYCLEBIN view before issuing a FLASHBACK TABLE ... TO BEFORE DROP statement so that you can rename the retrieved triggers and constraints to more usable names.
    •When you drop a table, all materialized view logs defined on the table are also dropped but are not placed in the recycle bin. Therefore, the materialized view logs cannot be flashed back along with the table.
    •When you drop a table, any indexes on the table are dropped and put into the recycle bin along with the table. If subsequent space pressures arise, then the database reclaims space from the recycle bin by first purging indexes. In this case, when you flash back the table, you may not get back all of the indexes that were defined on the table.
    >
    Just rename the constraints since they are in your own schema.

  • Problem in deleting entries from internal table

    i am selecting
               vrgar
                perio
                paobjnr
                belnr
                gjahr
                perde
                budat
                kndnr
                artnr
                frwae
                kursf
                rec_waers
                kaufn
                kdpos
                bukrs
                kokrs
                werks
                gsber
                vkorg
                vtweg
                spart
                rbeln
                rposn
                prctr
                pprctr
                kunnr
                land1
                regio
                kunwe
                kvgr1
                wwpmg
                zterm
                wwcst
                wwrst
                mvgr3
                wwseg
                wwcls
                wwesa
                prdha
                wwbun
                wwexd
                wwph1
                wwph2
                wwph3
                wwph4
                prat1
                prat2
                vrprs
                vv510
                vv508
                vv509
                vvqt2
                vv515
        INTO TABLE ct_ce11000 FROM ce11000
        WHERE paledger EQ gv_ledbo AND
              vrgar    EQ lc_vrgar AND
              belnr    GT uv_belnr AND
              gjahr    EQ pa_gjahr AND
              perde    EQ pa_perd AND
              bukrs    EQ pa_bukrs.
    now i awant to delete all those entries from my internal table ct_ce11000 where my plant (WEKRS) and company code (BUKRS)
    i am writting
    loop at ct_ce11000 into wa_ce11000.
    if wa_ce11000-werks ne wa_ce11000-bukrs.
    now how can i delete all the entries from nmy internal table (ct_ce11000)  when plant and company code is not same
    pls help me  with logic.
    thank you for helping me

    Hello Guys,
    It is not advisable to delete the entries from the internal table you are looping upon. See this thread: [Sy-tabix in loop : Doubt|Sy-tabix in loop : Doubt]
    And to answer the OP's question select data into some local internal table & based on the condition populate your final table. Creating a local table of the same type as the final table will not create too much performance overhead
    Cheers,
    Suhas

Maybe you are looking for