Extract Single archivelog file from RMAN

Hi,
Can anyone tell me how to extract the single archivelogfile from RMAN which taken on primary database.
This archivelogfile is required for recovering the standby database.
Oracle version is 10.2.0
Thanks in advacne.......

user1813632 wrote:
Hi,
Can anyone tell me how to extract the single archivelogfile from RMAN which taken on primary database.
This archivelogfile is required for recovering the standby database.
Oracle version is 10.2.0
Thanks in advacne.......try this
RMAN> list backup of archivelog logseq 5594;
refer the link:-
http://arup.blogspot.com/2009/12/resolving-gaps-in-data-guard-apply.html
Edited by: rajeysh on May 26, 2011 11:55 AM

Similar Messages

Extracting a flat file from oracle table

I have moved the knowledge module KIM ISO SQL to FileAppend from the Metadata to my project folder.
But when I create an interface mapping the oracle table and a flat file on a different unix server, in the drop down menu , it shows only KIM SQL TO SQL and KIM Control Append.It does not show up the SQL to FileAppend knowledge module option.
What should I do to extract a flat file from oracle table?
Thanks
Hima
Overstock.com

All IKM in the Drop Down Menu are dependent of the target technology.
A question, at this interface, is your target table a file ?

How do I extract an audio file from a PDF in Pro? (Mac)

How do I extract an audio file from a PDF in Pro? (Mac) . Properties say it's a .m4a file.
Thanks

Hi Tim,
That isn't a supported feature. If the PDF is unsecured and you have the legal rights to extract the audio, it would be possible to locate and decompress the raw file data from the PDF file using third-party tools to read the low-level file structure (a hex editor or Cos editor) - but Acrobat can't help you.
Regards,
Rave

How do I extract my music files from a evternal hard drive and put them on my itunes?

how do I extract my music files from a evternal hard drive and put them on my itunes?

If you used the Finder to move the files, iMovie will have lost track of them. iMovie holds the locations of the Event files, and Project files contain references to those locations. If you move the files, iMovie has no way of knowing where they are.
If you can, first move all the files back to their original locations. Plug in the external drive. Open iMovie and move the files in iMovie's interface (help explains how, but basically, just drag and drop in the event pane).
Then you can connect the drive to the new computer, and iMovie will see them.

So Wat to do? Is there any way to get out as a single swf file from captivate.

Dear friends,
I am beginner in Adobe Captivate. We have a E-learning
project. We are using Dockers as our LMS. Previously we were using
Flash for all. Now we are trying Captivate for better and faster
results. I have few swf files and i inserted al files in Captivate
and i published. So instead of getting single output, am getting
all the swfs, skin swf and html file. Html file is accessing all
swfs and works. But it is not working in Dockers. Single swf will
only work in Dockers. So Wat to do? Is there any way to get out as
a single swf file from captivate. please Help mee.
Thanks
Flashlover

If 'Dockers' cannot handle a .zip file as the content and
instead
requires a single, uncompressed content file, then it is not
SCORM-compliant. The SCORM specification requires the LMS to
handle a
'pif' file (most common is .zip) which contains the lesson
and the
required manifest file. If Dockers doesn't support that then
you can't
do SCORM-compliant content.
Erik
loverflash wrote:
> Dear friends,
>
> We are using
> Dockers as our LMS.
> So instead of getting single output, am
> getting all the swfs, skin swf and html file. Html file
is accessing all swfs
> and works. But it is not working in Dockers. Single swf
will only work in
> Dockers.
>
> Thanks
> Flashlover
>
Erik Lord
http://www.capemedia.net
Adobe Community Expert - Authorware
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
samples, tips, products, faqs, and links!
*Search the A'ware newsgroup archives*
http://groups.google.com/group/macromedia.authorware

Extract Single Tone Information from Hann Spectrum

I need to examine the details of "Extract Single Tone Information from Hann Spectrum.vi" but i couldn't because it is password protected. How can i remove this password?Is it NIs strategy to set the password to some vi's?.Or is there any other function behaving like "Extract Single Tone Information from Hann Spectrum.vi" so that i can see inside?
Regards.

I have attached a Power-Point presentation from NI-Week 1999 that describes the algorithm concept and performances. Note that the function shipping with LabVIEW is more complex (and more accurate) than the one described, but I hope this will give you a good idea on how things are implemented.
Attachments:
tm3bb.ppt ‏1174 KB

How to copy archivelog-files from a ASM instance to another ASM instance

Hello ,
our RAC database has to be moved to another Datacenter. The database has a size of several Terrabyte. Will will create a standby database (on a cluster) on the new datacenter (using RMAN backup). Since the RMAN backup takes rather long we would like to copy the archive logs to the new datacenter. Since the archivelog-files are stored on a dirskgroup of an asm instance we have the following question:
- how can the archivelog files get copied from the current location to the new location?
Rgds
Jan

VivaLaVida wrote:
Many thanks for your answer...
As a matter of fact the archivelogs are not backuped on a filesystem. If so we would copy them from the source to the destination host (that's easy).
The question is "how to get them copied from one ASM diskgroup to another ASM diskgroup". RMAN might be a good solution - but we would need to
figure that out...
We talking about 100 GB of archivelogs a day - therefore we don't want to wait until the standby database is configured and online. To have the archivelogs
already on the new host in the new datacenter would save alot of time.What is ASM version?
The copy is peer to peer? (i.e Can you copy files from one ASM to another directly?)

Archivelog files and Rman backup

Hi all,
Please somebody guide me regarding the following concept.
We have the oracle server version 10.2.0.1.0, working with Windows OS,
I had set the parameter log_archive_dest_1 for locating archivelog files, then I had changed the archivelog files to the flash recovery area(located in another disk) by using the parameters db_recovery_file_dest_size and db_recovery_file_dest.
Now the archivelog files are being located at two different location. At this point, If I take backup for archivelog files with the aid of RMAN, then ,
How will the RMAN take backup from those two different locations?
Thanks&Regards,
Jai.

PROBLEM :
I have archivelogs duplexed - when running RMAN - rman backups up the archivelogs from both duplexed destinations - from the user manual - this should not be the case, any ideas?
Details:
I have archivelogs duplexed
I have the following set in rman :
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 2 DAYS;
CONFIGURE BACKUP OPTIMIZATION ON;
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/backup/rman/WPPMD/control_%F';
CONFIGURE DEVICE TYPE 'SBT_TAPE' PARALLELISM 10 BACKUP TYPE TO BACKUPSET;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/backup/rman/WPPMD/backup_%d_%T_%U' MAXPIECESIZE 10 G;
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
CONFIGURE COMPRESSION ALGORITHM 'LOW' AS OF RELEASE 'DEFAULT' OPTIMIZE FOR LOAD TRUE;
CONFIGURE ARCHIVELOG DELETION POLICY TO BACKED UP 1 TIMES TO DISK;
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/app/oracle/product/11.2.0/dbhome_1/dbs/snapcf_WPPMD.f'; # default
When I run backups via a script :
backup incremental level=$RMAN_LEVEL database plus archivelog;
($RMAN_LEVEL changes between 0 and 1 depending on the day of the week)
It backs both duplex copies of the same archivelog
From the document :
Oracle10g / 11g - Getting Started with Recovery Manager (RMAN) [ID 360416.1]
It says :
Even if your redo logs are being archived to multiple destinations and you use RMAN to back up archived redo logs,
RMAN selects only one copy of the archived redo log file to include in the backup set. (Since logs with the same log sequence number are identical, there is no need to include more than one copy.)
But this is not the case ie
RMAN> list archivelog sequence 2445;
using target database control file instead of recovery catalog
List of Archived Log Copies for database with db_unique_name WPPMD
=====================================================================
Key Thrd Seq S Low Time
4640 1 2445 A 17-DEC-10
Name: /log/recovery_area/WPPMD/archivelog2/1_2445_735315419.dbf
4639 1 2445 A 17-DEC-10
Name: /log/recovery_area/WPPMD/archivelog/2010_12_17/o1_mf_1_2445_6jpx9n7c_.arc
So it still backing up both copies of the archive log.
Any ideas? is this a bug?
Thanks
Luca
Edited by: user4599449 on 17-Dec-2010 07:05
Edited by: user4599449 on 17-Dec-2010 07:06

How to restore specific backup file from RMAN?

Hi,
I am just begginer with Oracle DB so I do not have a lot knowledge.
I created two backups at April the 8th and April the 10th.
I did following from RMAN.
shutdown immediate
startup mount
configure channel 1 device type disk format '/opt/oracle/backup/std_%U';
backup database
startup
output was:
including current control file in backupset
including current SPFILE in backupset
it created two files: std-0so6l0vn(2 GB) and std_0to6l106 (7 MB).
First question - first file is backup and what is the second file???
Today I created also backup and it also created two files: std_0uo6morg (2GB) and std_0vo6morv (7MB)
Now I want to return backup from 2 days ago (*std-0so6l0vn*) but can't;
I do the the following:
shutdown immediate
startup mount
restore database from '/opt/oracle/backup/std_0so6l0vn'
but getting error - only SPFILE or control file can be restored from autobackup.
How to restore my backup from two days ago? It looks to me so complicated and hardly understandable.
What command to execute from RMAN to succeed in restore?
Thank you

I still can not restore database; I tried Honza method.
i try
startup nomount
restore controlfile from 'restore controlfile from /opt/oracle/backup/sss_11o7efd9_1_1';
And getting message:
no autobackup found or specified handle is not a valid copy or piece
list backup returns:
BS Key Type LV Size Device Type Elapsed Time Completion Time
19 Full 6.80M DISK 00:00:01 19-APR-13
BP Key: 19 Status: AVAILABLE Compressed: NO Tag: TAG20130419T025522
Piece Name: /opt/oracle/backup/sss_11o7efd9_1_1
Control File Included: Ckp SCN: 3178467 Ckp time: 19-APR-13
SPFILE Included: Modification time: 02-APR-13
show all returns:
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
CONFIGURE CONTROLFILE AUTOBACKUP OFF; # default
configuration for DISK channel 2 is ignored
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE CHANNEL 1 DEVICE TYPE DISK FORMAT '/opt/oracle/backup/sss_%U';
CONFIGURE CHANNEL 2 DEVICE TYPE DISK FORMAT '/opt/oracle/backup/sss_%U';
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/opt/oracle/product/10.2.0/dbs/snapcf_ctginst1.f'; # default
Please help I really must restore database but can't do it.

Automate creating single PDF file from multiple documents

Hi everyone ! I am testing the Adobe XI version, especially because I need it for a very specific function.I haven't found it yet, maybe you guys can help ?
Basically, I need to make a user friendly system, that in one click will create a single PDF document from multiple files :
To be more precise : I have in a folder on the network 25 different documents (Word and PDF mainly). Some of these documents change weekly. What I need as an end result is a single PDF, that combines these 25 ones in a specific order, and the tricky part is I need to automate this so that someone with absolutely no knowledge of Acrobat can perform this task, with just a click.
I have found of course the procedure to manually build such a combined PDF, but as you can see it does not fulfil my needs.
So that's it, as simple as that
As a bonus question : I am still struggling with the construction of these documents : in the Word documents I use, there are both internal links within the document, and links between the documents (pointing to other Word files, or PDF files). I keep losing those links when I combine, is there something I am missing ?
Second bonus question : I would like to have multiple levels of signets, but for some reason all my signets are at the same hierarchical level. Anything I am doing wrong ?
A free electronic doughnut for anyone giving me a hint !

When you combine you have many PDFs together in one, new PDF. Your orignal links are from one specific file to another specific file. A combine does not change the link in the original file. So the link is now from the PDFcombined to the second specific file. However, "second specific file" won't be present - so, "broken link".
Be well...

Removing RMAN backup files from RMAN prompt

DB version: 10.2.0.4
OS : AIX
Due to space constraints, we had to change our retention policy today. So, i need to remove some old backup files manually to free up some space. Should i remove the backup files from OS using rm command and then issue a
delete expired backup;from RMAN prompt?
Or is there another recommended way?

If you remove them manually from the O/S, then you'll have to perform a CROSSCHECK BACKUP prior to the DELETE EXPIRED.
Or once you change your retention policy you could issue DELETE OBSOLETE, which may be the safer way to ensure you don't accidentally remove wrong backup files.

How do I extract and save files from an .iso download?

I need to extract and burn to CD files from an .iso download. Has anyone used 3rd party software to do this successfully?

I was able to burn files to CD by double-clicking the .iso download folder in Finder, selecting all, then "burn X items to disc...". (There was a problem with the first .iso file I tried, but after I downloaded again all went well). No 3rd party software was needed).

Cannot extract dimension .csv files from HFM to be able to use maploader

Hi All!
We are in the middle of implementing FDM at a financial consolidation project. During this build we would like to use FDM to load HFM with data.
To help the users we would like to offer them the Maploader.xml which is provided in the mapping templates.zip
To prepare this maploader file we need to extract the dimension data from HFM into csv files and load these into the maploader.
Can anyone help me with extracting the .csv files? The script we use creates the csv files but does not load them with the metadata.
Maybe it is possible to get the right script? Or is this already available in FDM (can't find it)?
Thank you in advance for your support!!

Anyone got any tips or directions to solve this?

How to use aggregator to create a single swf file from multiple files

Hi everyone,
I am working on the client's requirement where i have to create a SCROM 2004 based video. Its basically a PPT inside the captivate file. And it has around 175 slides in the file. Some of the slides have animations, voiceover. I am facing a problem during PUBLISHING the file into single SWF file format. Whenever I Publish the slides as SWF, it creates number of SWF files, Swf skin of the player and other manifest, Scorm 2004 files.
I want only one single SWF file in which every slide should be incorporated in it. Dont know, why it is happening? I tried aggregator for this also, but it didnt worked... The Skin.swf has been easily added and no other files are adding. It shows me an error: "Name.swf is not a AS3 Captivate file ....."
I am new to this. Please help me out as I have a very short deadline for this.
Thanks and Regards

Maybe you misunderstand: this is a user forum, not online help by Adobe staff.
Sorry, but if you are that impatient, you'll have to pay for online support. You post a question and expect to have answers within minutes?
Lilybiri

Extract single channel information from file group

Hello All,
I want to perform a repeat operation on one channel of a large number of multi-channel files.
As a simplified example lets say I want to calculate the max value in channel 1 for each file in a group. I then want to place these values in the row of a new channel in a new file. Has anyone a similar example file I could modify or suggestions on how to do this? I am working with TDMS files.
Thanks
Mark
Solved!
Go to Solution.

I had a very similar approach, so here's another example in case it helps. This example loops through all files in a specified directory, and if the file is a TDMS file, it loads the first channel in the file and calculates the maximum value.
DIM MyFiles, iCount, Channel
CALL Data.Root.Clear()
SET Channel = Data.Root.ChannelGroups.Add("Calculated Values").Channels.Add("Maximum",DataTypeFloat64)
MyFiles = DirListGet("C:\Program Files (x86)\National Instruments\DIAdem 2011\Examples\Data", "*.*", "filename", "FullFilenames")
IF IsArray(MyFiles) THEN
FOR iCount = LBound(MyFiles) to UBound(MyFiles)
IF UCase(NameSplit(MyFiles(iCount),"E")) = "TDMS" THEN
CALL DataFileLoadSel(MyFiles(iCount),,"[1]/[1]")
Channel.Values(Channel.Size+1) = CCh("Calculated Values/[2]",2)
CALL Data.Root.ChannelGroups("Calculated Values").Channels.Remove(2)
END IF
NEXT
END IF
If you can calculate the channel maximum value (or whatever property you're interested in tracking) during the acquisition and saving of the file, you should store that entity to a TDMS channel property. This would allow you to run queries on the property across all of your files and then very quickly load the results as a channel into the Data Portal.
I hope that helps...
Derrick S.
Product Manager
NI DIAdem
National Instruments

Extract Single archivelog file from RMAN

Similar Messages

Maybe you are looking for