Extraction for SQL server

Hi all,
I have one requirement that Extract data from SQL to BW side.
i know how to extract the dat from r/3 to BW side like creation of data source etc. But i want to how we can do this in SQL side.
can Any one please give step by step solution...
regards
anil

HI Anil,
Look at DB connect functionality!
http://help.sap.com/saphelp_erp2004/helpdata/en/a1/89786c3df35c4ea930a994e884bb4c/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/s-u/transferring%20data%20with%20db%20connect.pdf
For more info go through these links
http://help.sap.com/saphelp_nw70/helpdata/EN/42/fdccb72aa95277e10000000a1553f7/frameset.htm
DB Connect Step By Step: DB Connect step by step
Hope it helps!
Bye,
Ravi

Similar Messages

OGG for SQL Server - Extract stops capturing - Bug?

Hi, all,
I've found a problem with OGG for SQL Server where the Extract stops capturing data after the transaction log is backed up. I've looked for ways to reconfigure OGG to avoid the problem but couldn't find any reference to options to workaround this problem. It seems to be a bug to me.
My Extract configuration is as follows:
EXTRACT ext1
SOURCEDB mssql1
TRANLOGOPTIONS NOMANAGESECONDARYTRUNCATIONPOINT
EOFDELAY 60
EXTTRAIL dirdat/e1
TABLE dbo.TestTable;
I'm using the EOFDELAY parameter for testing purposes only, since it's easy to reproduce the scenario that causes the issue when the extract polling is configured with longer intervals.
When the Transaction Log backup runs, SQL Server marks all the virtual logs that are older than the primary and secondary truncation points as inactive (status = 0). These virtual logs can then be reused if required. They still contain change records, though, and OGG can read from then if required, before they are overwritten. This situation will never occur if we are not using SQL Replication and have the Extract configured with the parameter MANAGESECONDARYTRUNCATIONPOINT.
However, I'm trying to simulate a scenario where OGG is used along SQL Replication and the extract is configured with the NOMANAGESECONDARYTRUNCATIONPOINT option. The situation that I've reproduced and caused the Extract to stop capturing is the follow sequence of events:
1. Extract reads transaction log and capture change up to LSN X
2. More change are made to the database and the LSN is incremented
3. Log Reader reads Transaction Log, captures changes up to LSN X+Y and advances the secondary truncation point to that LSN
4. A transaction log occurs, backs up all the active virtual logs, advances the primary truncation point to a LSN greater than LSN X+Y, and marks all the virtual logs with LSNs <= X+Y as inactive (status = 0)
5. Changes continue to happen in the database consuming all the available inactive virtual logs and overwriting them.
6. The extract wakes up again to capture more changes.
At this point, the changes between LSNs X and X+Y are not in the Transaction Log anymore, but are available in the backups. From what I understood in the documentation the Extract should detect that situation and retrieve the changes from the Transaction Log backups. This, however, is not happening and the Extract becomes stuck. It still pools the transaction log at the configured interval query the log state with DBCC LOGINFO, but doesn't move forward anymore.
If I stop and restart the Extract I can see from the trace that it does the right thing upon startup. It realises that it requires information that's missing from the logs, query MSDB for the available backups, and mine the backups to get the required LSNs.
I would've thought the Extract should do the same during normal operation, without the need for a restart.
Is this a bug or the normal operation of the Extract? Is there a way to configure it to avoid this situation without using NOMANAGESECONDARYTRUNCATIONPOINT?
The following is the state of the Extract once it gets stuck. The last replicated change occurred at 2012-07-09 12:46:50.370000. All the changes after that, and there are many, were not captured until I restarted the Extract.
GGSCI> info extract ext1, showch
EXTRACT EXT1 Last Started 2012-07-09 12:32 Status RUNNING
Checkpoint Lag 00:00:00 (updated 00:00:54 ago)
VAM Read Checkpoint 2012-07-09 12:46:50.370000
LSN: 0x0000073d:00000aff:0001, Tran: 0000:000bd922
Current Checkpoint Detail:
Read Checkpoint #1
VAM External Interface
Startup Checkpoint (starting position in the data source):
Timestamp: 2012-07-09 11:41:06.036666
LSN: 0x00000460:00000198:0004, Tran: 0000:00089b02
Recovery Checkpoint (position of oldest unprocessed transaction in the data so
urce):
Timestamp: 2012-07-09 12:46:50.370000
LSN: 0x0000073d:00000afd:0004, Tran: 0000:000bd921
Current Checkpoint (position of last record read in the data source):
Timestamp: 2012-07-09 12:46:50.370000
LSN: 0x0000073d:00000aff:0001, Tran: 0000:000bd922
Write Checkpoint #1
GGS Log Trail
Current Checkpoint (current write position):
Sequence #: 14
RBA: 28531192
Timestamp: 2012-07-09 12:50:02.409000
Extract Trail: dirdat/e1
CSN state information:
CRC: D2-B6-9F-B0
CSN: Not available
Header:
Version = 2
Record Source = A
Type = 8
# Input Checkpoints = 1
# Output Checkpoints = 1
File Information:
Block Size = 2048
Max Blocks = 100
Record Length = 20480
Current Offset = 0
Configuration:
Data Source = 5
Transaction Integrity = 1
Task Type = 0
Status:
Start Time = 2012-07-09 12:32:29
Last Update Time = 2012-07-09 12:50:02
Stop Status = A
Last Result = 400
Thanks!
Andre

It might be something simple (or maybe not); but the best/fastest way to troubleshoot this would be to have Oracle (GoldenGate) support review your configuration. There are a number of critical steps required to allow GG to interoperate with MS's capture API. (I doubt this is it, but is your TranLogOptions on one line? It looks like you have it on two , the way it's formatted here.)
Anyway, GG support has seen it all, and can probably wrap this up quickly. (And if it was something simple -- or even a bug -- do post back here & maybe someone else can benefit from the solution.)
Perhaps someone else will be able to provide a better answer, but for the most part troubleshooting this (ie, sql server) via forum tends to be a bit like doing brain surgery blindfolded.

Increase Performance and ROI for SQL Server Environments

May 2015
Explore
The Buzz from Microsoft Ignite 2015
NetApp was in full force at the recent Microsoft Ignite show in Chicago, talking about solutions for hybrid cloud, and our proven solutions for Microsoft SQL Server and other Microsoft applications.
Hot topics at the NetApp booth included:
OnCommand® Shift. A revolutionary technology that lets you move virtual machines back and forth between VMware and Hyper-V environments in minutes.
Azure Site Recovery to NetApp Private Storage. Replicate on-premises SAN-based applications to NPS for disaster recovery in the Azure cloud.
These tools give you greater flexibility for managing and protecting important business applications.
Chris Lemmons
Director, EIS Technical Marketing, NetApp
If your organization runs databases such as Microsoft SQL Server and Oracle DB, you probably know that these vendors primarily license their products on a "per-core" basis. Microsoft recently switched to "per-core" rather than "per-socket" licensing for SQL Server 2012 and 2014. This change can have a big impact on the total cost of operating a database, especially as core counts on new servers continue to climb. It turns out that the right storage infrastructure can drive down database costs, increase productivity, and put your infrastructure back in balance.
In many customer environments, NetApp has noticed that server CPU utilization is low—often on the order of just 20%. This is usually the result of I/O bottlenecks. Server cores have to sit and wait for I/O from hard disk drives (HDDs). We've been closely studying the impact of all-flash storage on SQL Server environments that use HDD-based storage systems. NetApp® All Flash FAS platform delivers world-class performance for SQL Server plus the storage efficiency, application integration, nondisruptive operations, and data protection of clustered Data ONTAP®, making it ideal for SQL Server environments.
Tests show that All Flash FAS can drive up IOPS and database server CPU utilization by as much as 4x. And with a 95% reduction in latency, you can achieve this level of performance with half as many servers. This reduces the number of servers you need and the number of cores you have to license, driving down costs by 50% or more and paying back your investment in flash in as little as six months.
Figure 1) NetApp All Flash FAS increases CPU utilization on your SQL Server database servers, lowering costs.
Source: NetApp, 2015
Whether you're running one of the newer versions of SQL Server or facing an upgrade of an earlier version, you can't afford not to take a second look at your storage environment.
End of Support for Microsoft SQL Server 2005 is Rapidly Approaching
Microsoft has set the end of extended support for SQL Server 2005 for April 2016—less than a year away. With support for Microsoft Windows 2003 ending in July 2015, time may already be running short.
If you're running Windows Server 2003, new server hardware is almost certainly needed when you upgrade SQL Server. Evaluate your server and storage options now to get costs under control.
Test Methodology
To test the impact of flash on SQL Server performance, we replaced a legacy HDD-based storage system with an All Flash FAS AFF8080 EX. The legacy system was configured with almost 150 HDDs, a typical configuration for HDD storage supporting SQL Server. The AFF8080 EX used just 48 SSDs.
Table 1) Components used in testing.
Test Configuration Components
Details
SQL Server 2014 servers
Fujitsu RX300
Server operating system
Microsoft Windows 2012 R2 Standard Edition
SQL Server database version
Microsoft SQL Server 2014 Enterprise Edition
Processors per server
2 6-core Xeon E5-2630 at 2.30 GHz
Fibre channel network
8Gb FC with multipathing
Storage controller
AFF8080 EX
Data ONTAP version
Clustered Data ONTAP® 8.3.1
Drive number and type
48 SSD
Source: NetApp, 2015
The test configuration consisted of 10 database servers connected through fibre channel to both the legacy storage system and the AFF8080 EX. Each of the 10 servers ran SQL Server 2014 Enterprise Edition.
The publicly available HammerDB workload generator was used to drive an OLTP-like workload simultaneously from each of the 10 database servers to storage. We first directed the workload to the legacy storage array to establish a baseline, increasing the load to the point where read latency consistently exceeded 20ms.
That workload was then directed at the AFF8080 EX. The change in storage resulted in an overall 20x reduction in read latency, a greater than 4x improvement in IOPS, and a greater than 4x improvement in database server CPU utilization.
Figure 2) NetApp All Flash FAS increases IOPS and server CPU utilization and lowers latency.
Source: NetApp, 2015
In other words, the database servers are able to process four times as many IOPS with dramatically lower latency. CPU utilization goes up accordingly because the servers are processing 4x the work per unit time.
The All Flash FAS system still had additional headroom under this load.
Calculating the Savings
Let's look at what this performance improvement means for the total cost of running SQL Server 2014 over a 3-year period. To do the analysis we used NetApp Realize, a storage modeling and financial analysis tool designed to help quantify the value of NetApp solutions and products. NetApp sales teams and partners use this tool to assist with return on investment (ROI) calculations.
The calculation includes the cost of the AFF8080 EX, eliminates the costs associated with the existing storage system, and cuts the total number of database servers from 10 to five. This reduces SQL Server licensing costs by 50%. The same workload was run with five servers and achieved the same results. ROI analysis is summarized in Table 2.
Table 2) ROI from replacing an HDD-based storage system with All Flash FAS, thereby cutting server and licensing costs in half.
Value
Analysis Results
ROI
65%
Net present value (NPV)
$950,000
Payback period
six months
Total cost reduction
More than $1 million saved over a 3-year analysis period compared to the legacy storage system
Savings on power, space, and administration
$40,000
Additional savings due to nondisruptive operations benefits (not included in ROI)
$90,000
Source: NetApp, 2015
The takeaway here is that you can replace your existing storage with All Flash FAS and get a big performance bump while substantially reducing your costs, with the majority of the savings derived from the reduction in SQL Server licensing costs.
Replace your existing storage with All Flash FAS and get a big performance bump while substantially reducing your costs.
Maximum SQL Server 2014 Performance
In addition to the ROI analysis, we also measured the maximum performance of the AFF8080 EX with SQL Server 2014. A load-generation tool was used to simulate an industry-standard TPC-E OLTP workload against an SQL Server 2014 test configuration.
A two-node AFF8080 EX achieved a maximum throughput of 322K IOPS at just over 1ms latency. For all points other than the maximum load point, latency was consistently under 1ms and remained under 0.8ms up to 180K IOPS.
Data Reduction and Storage Efficiency
In addition to performance testing, we looked at the overall storage efficiency savings of our SQL Server database implementation. The degree of compression that can be achieved is dependent on the actual data that is written and stored in the database. For this environment, inline compression was effective. Deduplication, as is often the case in database environments, provided little additional storage savings and was not enabled.
For the test data used in the maximum performance test, we measured a compression ratio of 1.5:1. We also tested inline compression on a production SQL Server 2014 data set to further validate these results and saw a 1.8:1 compression ratio.
Space-efficient NetApp Snapshot® copies provide additional storage efficiency benefits for database environments. Unlike snapshot methods that use copy-on-write, there is no performance penalty; unlike full mirror copies, NetApp Snapshot copies use storage space sparingly. Snapshot copies only consume a small amount of storage space for metadata and additional incremental space is consumed as block-level changes occur. In a typical real-world SQL Server deployment on NetApp storage, database volume Snapshot copies are made every two hours.
First introduced more than 10 years ago, NetApp FlexClone® technology also plays an important role in SQL Server environments. Clones are fully writable, and, similar to Snapshot copies, only consume incremental storage capacity. With FlexClone, you can create as many copies of production data as you need for development and test, reporting, and so on. Cloning is a great way to support the development and test work needed when upgrading from an earlier version of SQL Server. You'll sometimes see these types of capabilities referred to as "copy data management."
A Better Way to Run Enterprise Applications
The performance benefits that all-flash storage can deliver for database environments are significant: more IOPS, lower latency, and an end to near-constant performance tuning.
If you think the performance acceleration that comes with all-flash storage is cost prohibitive, think again. All Flash FAS doesn't just deliver a performance boost, it changes the economics of your operations, paying for itself with thousands in savings on licensing and server costs. In terms of dollars per IOPS, All Flash FAS is extremely economical relative to HDD.
And, because All Flash FAS runs NetApp clustered Data ONTAP, it delivers the most complete environment to support SQL Server and all your enterprise applications with capabilities that include comprehensive storage efficiency, integrated data protection, and deep integration for your applications.
For complete details on this testing look for NetApp TR-4303, which will be available in a few weeks. Stay tuned to Tech OnTap for more information as NetApp continues to run benchmarks with important server workloads including Oracle DB and server virtualization.
Learn more about NetApp solutions for SQL Server and NetApp All-flash solutions.
Quick Links
Tech OnTap Community
Archive
PDF

May 2015
Explore
The Buzz from Microsoft Ignite 2015
NetApp was in full force at the recent Microsoft Ignite show in Chicago, talking about solutions for hybrid cloud, and our proven solutions for Microsoft SQL Server and other Microsoft applications.
Hot topics at the NetApp booth included:
OnCommand® Shift. A revolutionary technology that lets you move virtual machines back and forth between VMware and Hyper-V environments in minutes.
Azure Site Recovery to NetApp Private Storage. Replicate on-premises SAN-based applications to NPS for disaster recovery in the Azure cloud.
These tools give you greater flexibility for managing and protecting important business applications.
Chris Lemmons
Director, EIS Technical Marketing, NetApp
If your organization runs databases such as Microsoft SQL Server and Oracle DB, you probably know that these vendors primarily license their products on a "per-core" basis. Microsoft recently switched to "per-core" rather than "per-socket" licensing for SQL Server 2012 and 2014. This change can have a big impact on the total cost of operating a database, especially as core counts on new servers continue to climb. It turns out that the right storage infrastructure can drive down database costs, increase productivity, and put your infrastructure back in balance.
In many customer environments, NetApp has noticed that server CPU utilization is low—often on the order of just 20%. This is usually the result of I/O bottlenecks. Server cores have to sit and wait for I/O from hard disk drives (HDDs). We've been closely studying the impact of all-flash storage on SQL Server environments that use HDD-based storage systems. NetApp® All Flash FAS platform delivers world-class performance for SQL Server plus the storage efficiency, application integration, nondisruptive operations, and data protection of clustered Data ONTAP®, making it ideal for SQL Server environments.
Tests show that All Flash FAS can drive up IOPS and database server CPU utilization by as much as 4x. And with a 95% reduction in latency, you can achieve this level of performance with half as many servers. This reduces the number of servers you need and the number of cores you have to license, driving down costs by 50% or more and paying back your investment in flash in as little as six months.
Figure 1) NetApp All Flash FAS increases CPU utilization on your SQL Server database servers, lowering costs.
Source: NetApp, 2015
Whether you're running one of the newer versions of SQL Server or facing an upgrade of an earlier version, you can't afford not to take a second look at your storage environment.
End of Support for Microsoft SQL Server 2005 is Rapidly Approaching
Microsoft has set the end of extended support for SQL Server 2005 for April 2016—less than a year away. With support for Microsoft Windows 2003 ending in July 2015, time may already be running short.
If you're running Windows Server 2003, new server hardware is almost certainly needed when you upgrade SQL Server. Evaluate your server and storage options now to get costs under control.
Test Methodology
To test the impact of flash on SQL Server performance, we replaced a legacy HDD-based storage system with an All Flash FAS AFF8080 EX. The legacy system was configured with almost 150 HDDs, a typical configuration for HDD storage supporting SQL Server. The AFF8080 EX used just 48 SSDs.
Table 1) Components used in testing.
Test Configuration Components
Details
SQL Server 2014 servers
Fujitsu RX300
Server operating system
Microsoft Windows 2012 R2 Standard Edition
SQL Server database version
Microsoft SQL Server 2014 Enterprise Edition
Processors per server
2 6-core Xeon E5-2630 at 2.30 GHz
Fibre channel network
8Gb FC with multipathing
Storage controller
AFF8080 EX
Data ONTAP version
Clustered Data ONTAP® 8.3.1
Drive number and type
48 SSD
Source: NetApp, 2015
The test configuration consisted of 10 database servers connected through fibre channel to both the legacy storage system and the AFF8080 EX. Each of the 10 servers ran SQL Server 2014 Enterprise Edition.
The publicly available HammerDB workload generator was used to drive an OLTP-like workload simultaneously from each of the 10 database servers to storage. We first directed the workload to the legacy storage array to establish a baseline, increasing the load to the point where read latency consistently exceeded 20ms.
That workload was then directed at the AFF8080 EX. The change in storage resulted in an overall 20x reduction in read latency, a greater than 4x improvement in IOPS, and a greater than 4x improvement in database server CPU utilization.
Figure 2) NetApp All Flash FAS increases IOPS and server CPU utilization and lowers latency.
Source: NetApp, 2015
In other words, the database servers are able to process four times as many IOPS with dramatically lower latency. CPU utilization goes up accordingly because the servers are processing 4x the work per unit time.
The All Flash FAS system still had additional headroom under this load.
Calculating the Savings
Let's look at what this performance improvement means for the total cost of running SQL Server 2014 over a 3-year period. To do the analysis we used NetApp Realize, a storage modeling and financial analysis tool designed to help quantify the value of NetApp solutions and products. NetApp sales teams and partners use this tool to assist with return on investment (ROI) calculations.
The calculation includes the cost of the AFF8080 EX, eliminates the costs associated with the existing storage system, and cuts the total number of database servers from 10 to five. This reduces SQL Server licensing costs by 50%. The same workload was run with five servers and achieved the same results. ROI analysis is summarized in Table 2.
Table 2) ROI from replacing an HDD-based storage system with All Flash FAS, thereby cutting server and licensing costs in half.
Value
Analysis Results
ROI
65%
Net present value (NPV)
$950,000
Payback period
six months
Total cost reduction
More than $1 million saved over a 3-year analysis period compared to the legacy storage system
Savings on power, space, and administration
$40,000
Additional savings due to nondisruptive operations benefits (not included in ROI)
$90,000
Source: NetApp, 2015
The takeaway here is that you can replace your existing storage with All Flash FAS and get a big performance bump while substantially reducing your costs, with the majority of the savings derived from the reduction in SQL Server licensing costs.
Replace your existing storage with All Flash FAS and get a big performance bump while substantially reducing your costs.
Maximum SQL Server 2014 Performance
In addition to the ROI analysis, we also measured the maximum performance of the AFF8080 EX with SQL Server 2014. A load-generation tool was used to simulate an industry-standard TPC-E OLTP workload against an SQL Server 2014 test configuration.
A two-node AFF8080 EX achieved a maximum throughput of 322K IOPS at just over 1ms latency. For all points other than the maximum load point, latency was consistently under 1ms and remained under 0.8ms up to 180K IOPS.
Data Reduction and Storage Efficiency
In addition to performance testing, we looked at the overall storage efficiency savings of our SQL Server database implementation. The degree of compression that can be achieved is dependent on the actual data that is written and stored in the database. For this environment, inline compression was effective. Deduplication, as is often the case in database environments, provided little additional storage savings and was not enabled.
For the test data used in the maximum performance test, we measured a compression ratio of 1.5:1. We also tested inline compression on a production SQL Server 2014 data set to further validate these results and saw a 1.8:1 compression ratio.
Space-efficient NetApp Snapshot® copies provide additional storage efficiency benefits for database environments. Unlike snapshot methods that use copy-on-write, there is no performance penalty; unlike full mirror copies, NetApp Snapshot copies use storage space sparingly. Snapshot copies only consume a small amount of storage space for metadata and additional incremental space is consumed as block-level changes occur. In a typical real-world SQL Server deployment on NetApp storage, database volume Snapshot copies are made every two hours.
First introduced more than 10 years ago, NetApp FlexClone® technology also plays an important role in SQL Server environments. Clones are fully writable, and, similar to Snapshot copies, only consume incremental storage capacity. With FlexClone, you can create as many copies of production data as you need for development and test, reporting, and so on. Cloning is a great way to support the development and test work needed when upgrading from an earlier version of SQL Server. You'll sometimes see these types of capabilities referred to as "copy data management."
A Better Way to Run Enterprise Applications
The performance benefits that all-flash storage can deliver for database environments are significant: more IOPS, lower latency, and an end to near-constant performance tuning.
If you think the performance acceleration that comes with all-flash storage is cost prohibitive, think again. All Flash FAS doesn't just deliver a performance boost, it changes the economics of your operations, paying for itself with thousands in savings on licensing and server costs. In terms of dollars per IOPS, All Flash FAS is extremely economical relative to HDD.
And, because All Flash FAS runs NetApp clustered Data ONTAP, it delivers the most complete environment to support SQL Server and all your enterprise applications with capabilities that include comprehensive storage efficiency, integrated data protection, and deep integration for your applications.
For complete details on this testing look for NetApp TR-4303, which will be available in a few weeks. Stay tuned to Tech OnTap for more information as NetApp continues to run benchmarks with important server workloads including Oracle DB and server virtualization.
Learn more about NetApp solutions for SQL Server and NetApp All-flash solutions.
Quick Links
Tech OnTap Community
Archive
PDF

How to access the datasource window in SSRS for sql server 2008 R2 for writing my query without having to go through the wizard?

I have used SSRS a lot years ago with Sql Server 2000 and Sql Server 2005. I have written external assemblies, ... But now I have to do this with Sql Server 2008 (R2 -- which I realize I am way behind the times already but ...) in sql server 2000 and
2005 there was a tab for datasource to the left of the tab for design which was to the left of the preview tab. How do I get to the datasource window in sql server 2008 (r2) ?
I see that datasource explorer. But where can I get to the datasource window to edit my queries and so forth for sql server 2008 (R2)?
Thanks
Rich P

I think I found the answer to my question --- just right-click on the the Data Sources or Datasets for editing connections and dataset queries. I'm guessing it gets even fancier with Sql Svr 2012 - 2014. Man, that's the one thing
about coding platforms -- you let it go for a few years and come back, and everything has changed (well, a lot of things). Now I need to figure out how to add an external assembly to SSRS 2008 (R2).
Rich P

After installed SP1 for SQL Server 2012, can no longer export to csv

After installing SP1 today via Windows Update, I am no longer able to export data to csv using the SQL Server Import and Export wizard. I get the following error message:
"Column information for the source and the destination data could not be retrieved, or the data types of source columns were not mapped correctly to those available on the destination provider."
"Column "col1": Source data type "200" was not found in the data type mapping file."...
(The above line repeats for each column)
The work-around I have to do is to manually map each column in the "Edit Mappings..." option from the "Configure Flat File Destination" page of the wizard. This is an extreme inconvenience to have to have to edit the mappings and change
each column to "string [DT_STR]" type from "byte stream [DT_BYTES]" type each time I want to export to csv. I did not have to do this before installing SP1; it worked perfectly for months with hundreds of exports prior to this update and
no need to modify mapping.

I am running Windows 7 64-bit, SQL Server 2012 Express edition. Again, just yesterday from Windows Update, I installed SQL Server 2012 Service Pack 1 (KB2674319), followed by Update Rollup for SQL Server 2012 Service Pack 1 (KB2793634). This situation was
not occurring before these updates were installed, and I noticed it immediately after they were installed (and of course I restarted my computer after the updates).
In SSMS I just now created a test DB and table to provide a step-by-step with screenshots.
Here is the code I ran to create the test DB and table:
CREATE DATABASE testDB;
GO
USE testDB;
GO
CREATE TABLE testTable
id int,
lname varchar(50),
fname varchar(50),
address varchar(50),
city varchar(50),
state char(2),
dob date
GO
INSERT INTO testTable VALUES
(1,'Smith','Bob','123 Main St.','Los Angeles','CA','20080212'),
(2,'Doe','John','555 Rainbow Ln.','Chicago','IL','19580530'),
(3,'Jones','Jane','999 Somewhere Pl.','Washington','DC','19651201'),
(4,'Jackson','George','111 Hello Cir.','Dallas','TX','20010718');
GO
SELECT * FROM testTable;
Results look good:
id   lname   fname   address   city   state   dob
1   Smith   Bob   123 Main St.   Los Angeles   CA   2008-02-12
2   Doe   John   555 Rainbow Ln.   Chicago   IL   1958-05-30
3   Jones   Jane   999 Somewhere Pl.   Washington   DC   1965-12-01
4   Jackson   George   111 Hello Cir.   Dallas   TX   2001-07-18
In Object Explorer, I right-click on the [testDB] database, choose "Tasks", then "Export Data..." and the SQL Server Import and Export Wizard appears. I click Next to leave all settings as-is on the "Choose a Data Source" page, then on the "Choose a Destination"
page, under the "Destination" drop-down I choose "Flat File Destination" then browse to the desktop and name the file "table_export.csv" then click Next. On the "Specify Table Copy or Query" page I choose "Write a query to specify the data to transfer" then
click Next. I type the following SQL statement:
SELECT * FROM testTable;
When clicking the "Parse" button I get the message "This SQL statement is valid."
On to the next page, "Configure Flat File Destination" I try leaving the defaults then click Next. This is where I am getting the error message (see screenshot below):
Then going to the "Edit Mappings..." option on the "Configure Flat File Destination" page, I see that all columns which were defined as varchar in the table are showing as type "byte stream [DT_BYTES]", size "0", the state column which is defined as char(2)
shows correctly however with type "string [DT_STR]", size "2" (see screenshow below):
So what I have to do is change the type for the lname, fname, address and city columns to "string [DT_STR]", then I am able to proceed with the export successfully. Again, this just started happening after installing these updates. As you can imagine, this
is very frustrating, as I do a lot of exports from many tables, with a lot more columns than this test table.
Thanks for your help.

Is it possible to have different authentication mode for SQL Server Database Engine and corresponding SQL Server instance?

Hi,
I have installed the x64 SQL Server 2008 R2 Express with default settings and run MBSA 2.3 (using default settings too). It shows three SQL Server instances: MSSQL10_50.SQLEXPRESS, SQLEXPRESS and SQLEXPRESS (32-bit). For the first, authentication
mode is Windows, for the rest two - mixed. Here https://social.msdn.microsoft.com/Forums/sqlserver/en-US/03e470dc-874d-476d-849b-c805acf5b24d/sql-mbsa-question-on-folder-permission?forum=sqlsecurity question
about such multiple instances was asked and the answer is that "MSSQL10.TEST_DB
is the instance ID for the SQL Server Database Engine of the instance, TEST_DB", so in my case, it seems that MSSQL10_50.SQLEXPRESS is the instance ID for SQL Server Database Engine of the SQLEXPRESS instance.
I have two questions:
1) How can it be that SQL Server DB Engine instance has different authentication mode than corresponding SQL Server Instance?
2) Why 32-bit instance reported although I installed only 64-bit version?
Also, this https://social.technet.microsoft.com/Forums/security/en-US/6b12c019-eaf0-402c-ab40-51d31dce968f/mbsa-23-reporting-sql-32bt-instance-is-running-in-mixed-mode-when-it-is-set-to-integrated?forum=MBSA question seems to be related to this
issue, but there is no answer :(.
Upd: Tried on clean Windows 8 installation and Windows 7 with the same result.

Because I DO NOT want the three people who will be having access to the production SQL Server to also have access to the primary host ProductionA. Since I have to allow them to RDC into the box to manage the SQL Server, I figure why not create
a separate VM for each one of them and they can RDC into those instead.
Does this make any sense?
Any tips are greatly appreciated. The main reason for doing this is because the three people who will be accessing the box, I need to isolate each one of them and at the same time keep them off of the primary ProductionA.
Thanks for your help.
M
Hello M,
Since you dont want the 3 guys to have access to Production machine A.You can install SQL Server client .By client i mean SQL server management studio(SSMS) on there local desktop and then create login for them in SQL Server.Open port on which your SQL server
is running for three of the machines so that they can connct.Now with SSMS installed on each machine each can connect to SQL server from there own machine.
I would also like you to be cautious with giving Sysadmin privilege to all three of them ,first please note down what task they would do and then decide what rights to be provided.
Your option will also work but you need to create 3 VM for that .Which is more tedious task.
Hope this helps
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Do I need to install Security Hotfix (KB2977319) after Cumulative Update 12 for SQL Server 2008 R2 SP2

HI,
I have installed Cumulative Update 12 for SQL Server 2008 R2 SP2 on my SharePoint instances. This was to resolve a known issue faced with the instance. CU12 helped resolve the issue. My company is rather strict regarding security hotfixes. But I am
not sure if this particular hotfix [Security Hotfix (KB2977319)] is required if the instance has CU12 applied.
Tested this on a Lab server, the installation did run fine, the summary log also stated that the KB is applied. But the Build Number did not change. Hence the doubt.
Overall summary:
Final result:                  Passed
Exit code (Decimal):           0
Exit message:                  Passed
Start time:                    2014-09-06 10:31:21
End time:                      2014-09-06 10:55:49
Requested action:              Patch
Instance SPNTSQLTRN overall summary:
Final result:                  Passed
Exit code (Decimal):           0
Exit message:                  Passed
Start time:                    2014-09-06 10:48:08
End time:                      2014-09-06 10:55:45
Requested action:              Patch
Package properties:
Description:                   SQL Server Database Services 2008 R2
ProductName:                   SQL2008
Type:                          RTM
Version:                       10
SPLevel:                       2
KBArticle:                     KB2977319
KBArticleHyperlink:            http://support.microsoft.com/?kbid=2977319
PatchType:                     QFE
AssociatedHotfixBuild:         0
Platform:                      x64
PatchLevel:                    10.52.4321.0
ProductVersion:                10.52.4000.0
GDRReservedRange:              10.50.4001.0:10.50.4199.0;10.50.4200.0:10.50.4250.0
PackageName:                   SQLServer2008-KB2977319-x64.exe
Installation location:         e:\ac2af22d88ee645b5b32b5c178\x64\setup\
Please inform if I need to apply the hotfix on CU12. Thanks in advance.
John S

Yes you must install Security update mentioned in KB 2977319 it is important for SQL Server to be patches with this security update. Without this it could allow an attacker to compromise your system and gain control over it.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles

Will Cumulative Update 12 for SQL Server 2008R2 SP2 fix: Warning: Unable to Verify TimeStamp for Path\ProgramName?

Hello,
I had a server crash recently and our outsource hosting tech support suggested applying Cumulative Upade 12 for SQL server 2008R2 SP2 to fix the issue. The exception from our dump file "Warning: Unable to Verify TimeStamp for Path\ProgramName"
is not in the list of hotfixes for this CU. Do you know if this will fix this issue? The CU warns not to apply the CU if your issue id not addressed by the CU. Here is a portion of the dump file with the relevant error:
This dump file has an exception of interest stored in it.
The stored exception information can be accessed via .ecxr.
(7e8.2ab4): Unknown exception - code 000042ac (first/second chance not available)
ntdll!NtWaitForSingleObject+0xa:
00000000`777412fa c3 ret
0:240> .sympath srv*c:\Websymbols*http://msdl.microsoft.com/download/symbols;
Symbol search path is: srv*c:\Websymbols*http://msdl.microsoft.com/download/symbols
Expanded Symbol search path is: srv*c:\websymbols*http://msdl.microsoft.com/download/symbols
0:240> .reload /f
.Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\sqlservr.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sqlservr.exe
..........Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\sqlos.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sqlos.dll
...............Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\opends60.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for opends60.dll
.......Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\BatchParser.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for BatchParser.dll
....Unable to load image C:\Program Files\Microsoft SQL Server\100\Shared\instapi10.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for instapi10.dll
*** ERROR: Module load completed but symbols could not be loaded for instapi10.dll
..Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\Resources\1033\sqlevn70.rll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sqlevn70.rll
*** ERROR: Module load completed but symbols could not be loaded for sqlevn70.rll
Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.
.................Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\ftimport.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ftimport.dll
.Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\msfte.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for msfte.dll
*** ERROR: Module load completed but symbols could not be loaded for msfte.dll
...........Unable to load image C:\Windows\System32\sqlncli10.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sqlncli10.dll
...Unable to load image C:\Windows\System32\1033\SQLNCLIR10.RLL, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SQLNCLIR10.RLL
*** ERROR: Module load completed but symbols could not be loaded for SQLNCLIR10.RLL
..Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\xpsqlbot.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for xpsqlbot.dll
.Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\XPStar.DLL, Win32 error 0n2
*** WARNING: Unable to verify timestamp for XPStar.DLL
.Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\sqlscm.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sqlscm.dll
...*** ERROR: Module load completed but symbols could not be loaded for odbcint.dll
...Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\Resources\1033\XPStar.RLL, Win32 error 0n2
*** WARNING: Unable to verify timestamp for XPStar.RLL
Thank you,
Steve -

The error message appears to be related to a debug session and not come from the actual crash.
So all I know is that you hade a server crash. I don't even know exactly what that means. Did Windows bite the dust? Or was it only SQL Server?
Assuming the latter, I would expect the SQL Server errorlog to have some information (and that would be ERRORLOG.1 or earlier, since the server have been restarted), but if SQL Server died the output may be incomplete.
There may be also dump files, but as I rarely look into these, I am not sure how to interpret them. But I am quite confident that "Unable to verify TimeStamp..." is not the reason SQL Server went down.
I would suggest the following course:
* If the server is not critical, do nothing. As long as it has onlyl happened once, it has only happened once.
* If the server is critical, open a case with Microsoft if you are not able to figure out the reason yourself. The key here is "Unknown exception - code 000042ac".
* If it happens again, you should absolutely open a case. An important thing here is whether the stack dump is identical or something different. If the stack dumps are identical, you may have hit a bug in SQL Server or the OS, and applying CUs or OS
fixes could help if it is a known issue. If the stack dump is something else, you have ghosts in the machine - that is, bad hardware.
Erland Sommarskog, SQL Server MVP, [email protected]

Deploy JDBC driver for SQL server 2005 on PI 7.1

How to deploy JDBC driver for SQL server 2005 on PI 7.1
We are in SAP NetWeaver 7.1 Oracle 10G
Third party system is SQL server 2005
There are different JDBC versions are available to download for SQL server 2005.
I am not sure about the applicable version for the PI 7.1 SP level. Again JMS Adapter needs to be deploy along with this.
Please help

Hi,
Hope this How to Guide help you.
How To Install and Configure External Drivers for the JDBC & JMS Adapters from
www.sdn.sap.com/irj/sdn/howtoguides
Regards,
Karthick.
Edited by: Karthick Srinivasan on Apr 13, 2009 4:07 PM

Deploying JDBC driver for SQL Server 2005 on PI 7.1

How to Deploy JDBC driver for SQL Server 2005 on PI 7.1 on Windows 2003 server
We are in NW PI 7.1 and third party db is sql server 05.
Found How-to Guide SAP NetWeaver u201804 but unable to find for NW PI 7.1
Can any one help me on this? (looking for guide step by step procedure)
Regards
Mahesh

Hi,
Check these:
Re: Installing JDBC Drivers for PI 7.1
how to deploy MS Sql Server 2005 and 2008 jdbc driver
Mention of a SAP Note in the first link or refer this note [831162|https://service.sap.com/sap/support/notes/831162]
Regards,
Abhishek.

*****Error in Microsoft JDBC drivers for SQL Server 2000****

hi guys,
I am getting the following error in my application. The error seems to have thrown by Microsoft JDBC drivers for SQL Server 2000
The application tries to execute the the following query when the error is thorwn:
SELECT getDate(); // getDate is a function which returns currebt date time. The error is thrown occassionally. Other times the same query is executed correctly by the application.
Can any one help with this one.
The error is:
java.lang.NullPointerException
     at com.microsoft.jdbc.base.BaseImplStaticCursorResultSet.setupTempFiles(Unknown Source)
     at com.microsoft.jdbc.base.BaseImplStaticCursorResultSet.<init>(Unknown Source)
     at com.microsoft.jdbc.base.BaseStatement.chainInServiceImplResultSets(Unknown Source)
     at com.microsoft.jdbc.base.BaseStatement.getNextResultSet(Unknown Source)
     at com.microsoft.jdbc.base.BaseStatement.commonGetNextResultSet(Unknown Source)
     at com.microsoft.jdbc.base.BaseStatement.executeQueryInternal(Unknown Source)
     at com.microsoft.jdbc.base.BaseStatement.executeQuery(Unknown Source)
     at com.sanderson.tallyman.util.TallymanDB.executeQuery(Unknown Source)
     at com.sanderson.tallyman.util.TallymanDB.getCurrentDate(Unknown Source)
     at com.sanderson.tallyman.operations.interfaces.RecordUpdateControl.updateRecord(Unknown Source)
     at com.sanderson.tallyman.operations.interfaces.DebtInterfaceControl.processUpdate(Unknown Source)
     at com.sanderson.tallyman.operations.interfaces.DebtInterfaceControl.processInterface(Unknown Source)
     at com.sanderson.tallyman.operations.interfaces.InterfaceHandler$ProcessRecord.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
rgds,

Hi,
Did you ever get an answer to this? I am also having this problem.

Why can't i use "INNER JOIN" in a query for SQL Server with JDBC??????

Hi,
I'm trying to execute some SQL queries and I just don't understand what's wrong.
I�m using Tomcat and SQL Server in order to do this, but when I�m try to execute a query with a INNER JOIN statements Tomcat raise a SQL exception... at the very first time I thought there was a problem with database connection but I realize that a simple query to a table works pretty well. then I found out some problems with JDBC:ODBC.... so I install JDBC for SQL Server 2000 and test with the same simple query and works..... so, I come to a conclusion.... INNER JOIN or JOIN statements can't be used in JDBC..... please... somebody tell I�m wrong and give me a hand...
I'm using TOMCAT 4 and JDK 1.4 SQL Server 2000
Error occurs when executeQuery() is called.... not prepareStatement().... ??????
Driver DriverRecResult = (Driver)Class.forName(driver).newInstance();
Connection ConnRecResult = DriverManager.getConnection(DSN,user,password);
PreparedStatement StatementRecResult = ConnRecResult.prepareStatement(query);
ResultSet RecResult = StatementRecResult.executeQuery(); <---- Exception raise here
So much tahnks in advance,

That's exactly what I think, driver it's raising the exception, but I don't know why.... i test the same query with INNER JOIN directly from SQL Query Analyser and it's works perfectly, my problem ain't SQL, but JSP and JDBC 'cause i'm a newbie about these issues.
Common sense tell me possible problems lie in SQLServer drivers 'cause i run the same pages on JRUN through jdbc:odbc and do works well, but by now i just depend on Tomcat.....
I've installed SQL Server drivers for JDBC but i just find it doesn't work fully... could be the version of JDK i've installed? what version do i need?
( I'm running Tomcat 4 with JDK 1.4 & SQL Server 2000 W2K )
thanks for reply.

Kerberos Configuration Manager for SQL Server: Access of system information failed!

I'm trying to use the new Kerberos Configuration Manager for SQL Server tool that was released recently to verify SPN on several SQL Servers, but any time I attempt to connect to a server I get the following error in the log:
6/24/2013 3:48:22 PM Info: Connect to WMI, \\<HOSTNAME>\root\cimv2
6/24/2013 3:48:25 PM Error: Access of system information failed System.DirectoryServices.AccountManagement.PrincipalOperationException: An error (1332) occurred while enumerating the group membership. The member's SID could not be resolved.
at System.DirectoryServices.AccountManagement.SAMMembersSet.IsLocalMember(Byte[] sid)
at System.DirectoryServices.AccountManagement.SAMMembersSet.MoveNextLocal()
at System.DirectoryServices.AccountManagement.SAMMembersSet.MoveNext()
at System.DirectoryServices.AccountManagement.FindResultEnumerator`1.MoveNext()
at System.Linq.Enumerable.Contains[TSource](IEnumerable`1 source, TSource value, IEqualityComparer`1 comparer)
at KerberosCM.WMIHelper.isUserLocalAdmin(SystemInfo si, UserPrincipal user)
at KerberosCM.WMIHelper.getUserInfo(SystemInfo mi)
6/24/2013 3:48:25 PM Error: Error System.Exception: Access of system information failed!
at KerberosCM.WMIHelper.getUserInfo(SystemInfo mi)
at KerberosCM.SystemInfo.GetInfo()
at KerberosConfigMgr.Utility.Login(String serverName, String login, String password, Boolean isCmdLine, Form uiForm)
Things I have tried to resolve this:
1. Verified that my account is a Domain Admin.
2. Attempt to connect locally without inputting any information for server/user/pw
3. Attempt to connect remotely using server/user/pw
I always receive the same error message and log: Access of system information failed!
Has anyone else run into this issue?

Update to this:
There were some invalid user accounts added to the Local Administrators group only showing up as a GUID. This caused the enumeration of the group to fail and generate the error in my original post. Removing those user accounts from the Administrators group
got past the enumeration error.
However, now when attempting to connect to the servers (locally or remotely) I get this error:
6/27/2013 10:24:24 AM Info: Connect to WMI, \root\cimv2
6/27/2013 10:24:38 AM Error: Access of system information failed System.Runtime.InteropServices.COMException (0x80070035): The network path was not found.
at System.DirectoryServices.DirectoryEntry.Bind(Boolean throwIfFail)
at System.DirectoryServices.DirectoryEntry.Bind()
at System.DirectoryServices.DirectoryEntry.get_AdsObject()
at System.DirectoryServices.PropertyValueCollection.PopulateList()
at System.DirectoryServices.PropertyValueCollection..ctor(DirectoryEntry entry, String propertyName)
at System.DirectoryServices.PropertyCollection.get_Item(String propertyName)
at System.DirectoryServices.AccountManagement.SAMStoreCtx.ResolveCrossStoreRefToPrincipal(Object o)
at System.DirectoryServices.AccountManagement.SAMMembersSet.MoveNextForeign()
at System.DirectoryServices.AccountManagement.SAMMembersSet.MoveNext()
at System.DirectoryServices.AccountManagement.FindResultEnumerator`1.MoveNext()
at System.Linq.Enumerable.Contains[TSource](IEnumerable`1 source, TSource value, IEqualityComparer`1 comparer)
at KerberosCM.WMIHelper.isUserLocalAdmin(SystemInfo si, UserPrincipal user)
at KerberosCM.WMIHelper.getUserInfo(SystemInfo mi)
6/27/2013 10:24:38 AM Error: Error System.Exception: Access of system information failed!
at KerberosCM.WMIHelper.getUserInfo(SystemInfo mi)
at KerberosCM.SystemInfo.GetInfo()
at KerberosConfigMgr.Utility.Login(String serverName, String login, String password, Boolean isCmdLine, Form uiForm)

Permissions needed for sql server job to execute stored procedure on linked server?

Hi all
I have a job step which attempts to call a stored procedure on a linked server.
This step is failing with a permission denied error. How can I debug or resolve this?
The job owner is sysadmin on both servers so should have execute permission to the database/proc I'm calling, right?
The error is:
The EXECUTE permission was denied on the object 'myProc', database 'myDatabase', schema 'dbo'. [SQLSTATE 42000] (Error 229). The step failed.
My code is:
EXEC [LinkedServer].myDatabase.dbo.myProc
Also tried:
SELECT * FROM OPENQUERY([LinkedServer], 'SET FMTONLY OFF EXEC myDatabase.dbo.myProc')
With the same result.
Any help appreciated.

The job owner may be sysadmin on the remote server. The service account for SQL Server Agent may not. And it is the latter that counts, since the it the service accounts that logs in and impersonates the job owner. But the impersonation inside SQL Server
does not count much in Windows, and it is through Windows connection is made to the other site.
One way to resolve this is to set up a login mapping for the job owner. The login mapping must be for an SQL login on the remote server.
You can verify the theory, but running this query from the job:
SELECT * FROM OPENQUERY([LinkedServer], 'SELECT SYSTEM_USER')
By the way, putting SET FMTONLY OFF in OPENQUERY is a terrible idea. This has the effect that the procedure is executed twice. (Unless both servers are SQL 2012 or higher in which case FMTONLY has no effect at all.)
Erland Sommarskog, SQL Server MVP, [email protected]

SQL Server Radio - A new podcast for SQL Server professionals

Hi everyone,
We (Guy Glantser and Matan Yungman) have recently launched a new podcast for SQL Server professionals, called "SQL Server Radio".
We release two shows a month, and basically talk about everything around SQL Server and the SQL Server community. On one show of each month, we juggle around and talk about interesting blog posts, forum discussions, news, events and other things that happen
in the SQL Server world. We expand about each of those items and add from our own experience. On the second show of the month, we go more in-depth. Sometimes we bring a guest, and sometimes we talk about a specific topic like SQL Server 2014, conferences or
professional development.
So if you love SQL Server and love learning by hearing, whether you're on your way to work, jogging or just chilling and
want to learn in a fun way, check us out on
http://www.SQLServerRadio.com
Two shows are already online..

Hi everyone,
We (Guy Glantser and Matan Yungman) have recently launched a new podcast for SQL Server professionals, called "SQL Server Radio".
We release two shows a month, and basically talk about everything around SQL Server and the SQL Server community. On one show of each month, we juggle around and talk about interesting blog posts, forum discussions, news, events and other things that happen
in the SQL Server world. We expand about each of those items and add from our own experience. On the second show of the month, we go more in-depth. Sometimes we bring a guest, and sometimes we talk about a specific topic like SQL Server 2014, conferences or
professional development.
So if you love SQL Server and love learning by hearing, whether you're on your way to work, jogging or just chilling and
want to learn in a fun way, check us out on http://www.SQLServerRadio.com
Two shows are already online..

Extraction for SQL server

Similar Messages

Maybe you are looking for