Extraction KNVV data from ERP via iDOC
Hi All,
I want to (mass) extract customer names+data (KNA1) from 4.6 ERP that later has to be loaded into MDM
(to be processed further with MDM/Java applications we develop at SAP).
Also the "favourite" currency of the extracted KNA1 items are to be extracted.
I have to do it automatically. BAPI-based "online" solution is inacceptable for the customer.
The extraction should be done via XI + iDOC.
The extraction step and the necessary iDOC is not clear for me.
#Is the iDOC DEBMDM06 or DEBMAS06 a good choice?
I don't see what is a segment of an iDOC for (E1KNVVM).
I tried to extract items from KNA1 with tr. MDM_CLNT_EXTR with extractor CUSTOMER_EXTRACT.
Unfortunately the KNVV view related fields were not in the iDOC sent to the XI.
/I don't really wonder since the sales area information were also necessary when
specifying the customer to get KNVV-related fields - also the sales currency of the partner/.
#Is there an extractor - either for MDM_CLNT_EXTR of for other ERP extraction client program -
where the Sales area is also a parameter?
I have rather Java-based experiences without practical iDOC/XI knowledge.
I've used SAP note 1035601 as a use case for PDF. Unfortunately I don't see how to make
the next step towards extracting from KNVV.
Thanks,
Balázs
Edited by: Balazs Csizmazia on Mar 26, 2009 3:45 PM
Hi Balazs,
If you are using customer_extract, the segment E1KNVVM, should be by default selected.
In the transaction, MDM_CLNT_EXTR, after filling all the required details, select the field groups.
You will see the segment E1KNVVM.By default it should be selected. If it is not in your case, just select it.
Hope it helps.
Thanks,
Minaz
Similar Messages
-
How to extract data from custom made Idoc that is not sent
Hi experts,
Could you please advise if there is a way how to extract data from custom made idoc (it collects a lot of data from different SAP tables)? Please note that this idoc is not sent as target system is not fully maintained.
As by now, we would like to verify - what data is extracted now.
Any help, would be appreciated!Hi,
The fields that are given for each segment have their length given in EDSAPPL table. How you have to map is explained in below example.
Suppose for segment1, EDSAPPL has 3 fields so below are entries
SEGMENT FIELDNAME LENGTH
SEGMENT1 FIELD1 4
SEGMENT1 FIELD2 2
SEGMENT1 FIELD3 2
Data in EDID4 would be as follows
IDOC SEGMENT APPLICATION DATA
12345 SEGMENT1 XYZ R Y
When you are extracting data from these tables into your internal table, mapping has to be as follows:
FIELD1 = APPLICATIONDATA+0(4) to read first 4 characters of this field, because the first 4 characters in this field would belong to FIELD1
Similarly,
FIELD2 = APPLICATIONDATA+4(2).
FIELD3 = APPLICATIONDATA+6(2).
FIELD1 would have XYZ, FIELD2 = R, FIELD3 = Y
This would remain true in all cases. So all you need to do is identify which fields you want to extract, and simply code as above to extract the data from this table.
Hope this was helpful in explaining how to derive the data. -
Error while extracting Vendor Data from R/3 system
Hi all,
I am trying to extract vendor data from R/3(ECC6.0) system to XI using Tcode MDM_CLNT_EXTR.
already I have maintained partner profile for the same.
I have given the necessary details like Creditor_extract,Target System and Distribution Mode as initial load.asusaully extraction process started and I found error in log file like"Table MASTER_IDOC_DATA is empty". Please help me if anyboday have idea about this.
Thanks in Advance,
Ravi.Hi Ravi,
you've got to set up the message type MDMRECEIPT for the Idoc distribution from R/3 to XI. Check chapter 5.2 in the IT configuration guide available on <a href="http://service.sap.com/installmdm">MDM Documentation Center</a>. It describes the necessary steps.
BR Michael -
Request: Problem in Extraction of data from CRM to BW
Hi Gurus
I have problems in extracting the data from CRM to BW.I thought you are the one who can solve them:
1) When I check the data in the datasource in RSA3 i can see all records as well as i can see complete data in that but when i extract and check the data in cube i can see all records but i cannot see the complete data i.e some data is missing.
2)And another problem is that In report i have 2 characteristics(DATS) start date and end date now i am trying to get number of days from start date to end date.
I appreciate you in advance. If u find any good documentation please send me to [email protected]
With regards
Nagamani.Hi krishna,
yes we did enhancement to this data source. In PRDOCTION its taking 27 hours time to load data.
For extraction from source system (CRM) its taking nearly 24 hours time as per JOb LOG .
08/05/2010 11:53:08 Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 10,849 records
08/05/2010 12:02:02 Result of customer enhancement: 10,849 records
08/05/2010 12:02:03 PSA=0 USING & STARTING SAPI SCHEDULER
08/05/2010 12:02:03 Asynchronous send of data package 1 in task 0002 (1 parallel tasks)
08/05/2010 12:02:06 IDOC: Info IDoc 2, IDoc No. 1576298, Duration 00:00:01
08/05/2010 12:02:06 IDoc: Start = 08/05/2010 10:26:37, End = 08/05/2010 10:26:38
08/05/2010 13:02:38 Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 10,958 records
08/05/2010 13:11:48 Result of customer enhancement: 10,958 records
08/05/2010 13:11:52 Asynchronous send of data package 2 in task 0003 (1 parallel tasks)
08/05/2010 13:11:53 tRFC: Data Package = 1, TID = 0AA00D0301984C5AEE8E44DB, Duration = 00:16:
08/05/2010 13:11:53 tRFC: Start = 08/05/2010 12:02:19, End = 08/05/2010 12:18:27
08/05/2010 14:30:13 Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 11,296 records
08/05/2010 14:39:53 Result of customer enhancement: 11,296 records
like this its taking 24 hours in extraction its self.
Edited by: kotha123 on Aug 10, 2010 12:08 PM
Edited by: kotha123 on Aug 10, 2010 12:09 PM -
How to Extract the data from R/3 Genric extractor to BW ?
How to Extract the data from R/3 Genric extractor to BW ?
hi,
step by step procedure for generic extraction delta
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
Refer:
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
http://help.sap.com/saphelp_nw04/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
Generic Extraction via Function Module
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
Extractions in BI
https://www.sdn.sap.com/irj/sdn/wiki
New to Materials Management / Warehouse Management?
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1b439590-0201-0010-ea8e-cba686f21f06
Ramesh -
When extracting SD data from R/3, err in tRFC raised that "No service for."
Hello fellows,
when I'm extracting SD data from R/3, an error raised about IDOC that "No service for system SAPSB2, client 100 in Integration Directory", and there is no work processing working in the R/3 system, could anybody help? Thanks!
JenniferHi,
You are extracting Data from ECC, so here no way related to XI, I think, the problem is with Parner Profile and IDoc settings, so chek it in WE20.
or
take IDoc nos from BW-->RSMO (in the detailed tab bottom you can find OLTP IDoc nos) and then goto ECC, BD87 and give that IDoc and check,
And also check in WE05 what is the Idoc Statu, this is connection problem only, so check with BAsis team.
Thanks
reddy -
Extract Classification data from R/3 for XI
Hi all
I am currently interning with a corporation and am stuck at a crucial point.
I tried using MATMAS/MATMAS05 and CLFMAS/CLFMAS02 for extracting the classification data from R/3 systems. i want to primarily generate valid iDoc's and transport them to XI later.
However, everytime I run the extraction object MATERIAL_EXTRACT from mdm_clnt_extr, the iDoc's generated have no classification data...
am stuck ppl... my colleagues say i should try looking for a new extractor for CLFMAS specifically..
Please help.HI,
Guess I did not state the problem clear enough.
The T-Table incorporates only the material number. I need to get different classification fields for all relevant materials.
So I am looking for a way to extract the classification data associated with the material numbers in my Z-table.
Anybody got an Idea?
Thanks for your help,
Regards,
Minima -
How to extract incremental data from SQL server to oracle tables in ODI
HI All,
In my ODI sql server is install.My Source is in SQL server and my target is in Oracle.
I need to create a interface mapping where i need to extract incremental data from sql server to oracle.
There is a datetime(with Timestamp) field in sql server .I need to pull incremental data based on dateime.
Example = tablename.DateTime > (select '1-jan-11' from dual) .....i am using this query but its not woking.the error is Invalid object name"dual".
We are not going to use Incremental in IKM and LKM.
Request you to please provide any suggestion ASAP.
Thanks,
LonyYou can do that via Variable.
In the interface mapping create a filter on Tablename.DateTime
and put the condition like this
Tablename.DateTime BETWEEN #VAR and in the variable use this query in refreshing tab with oracle schema
SELECT max(start_time)||' AND '||max(END_TIME)+1 from audit_table where ETL_JOB_CODE = '20'In the package call the above variable in refresh mode and then interface.
This way you will pass from the query between and condition date and pass to interface so that SQL Server fetches the data between those too range.
Note:- You might need to tweak the date format so that SQL Server can understand.
Hope this helps. -
Can't extract the data from sourse system
hi,everyone
i have a question about extracting the data from sourse system.i created a general datasourse.in the r3 system,i used t-code:rsa3 to extract the data successful. but ,when i replicate the datasourse to the bw system,i can't extract the data to the psa. in the process of the extracting,accur a error like below:
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the
authorizations of the background user in the source system.
who can tell me why?
thx
zhangHi zhang,
Please check the below points.
1. Perform the connection and authorization test in SM59 for the RFC connecion.
2. Make sure the RFC user extracting the data is having sufficient authorization and correct profile as per note 150315.
3. make sure there are sufficient number of Dialog process in BW in SM50.
4. check T code SM58 in source system for any more errors.
5. check the connection between the systems.
Check
Note 561880 - Requests hang because IDocs are not processed.
Note 535172 - IDoc: Dup. IDocs in tRFC inbound processing w/ runtime error
Note 555229 - IDocs hang in status 64 for tRFC with immediate processing
Hope this helps.
Regards,
Suman.T -
Extraction of data from CRM to BW for datasource 0crm_quotation_I
Hi,
Extraction of data from CRM to BW for data source 0CRM_QUOTATION_I is taking 27 hours of time to load data into ODS for 1 million records.
Here I am doing FULL LOAD with 4 Infopackages in parllel with different select-options.Even I tried DELTA load but it hasn't worked out properly.
Is there any solution to reduce time from Datasource to ODS with FULL LOAD. Please help me.Hi krishna,
yes we did enhancement to this data source. In PRDOCTION its taking 27 hours time to load data.
For extraction from source system (CRM) its taking nearly 24 hours time as per JOb LOG .
08/05/2010 11:53:08 Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 10,849 records
08/05/2010 12:02:02 Result of customer enhancement: 10,849 records
08/05/2010 12:02:03 PSA=0 USING & STARTING SAPI SCHEDULER
08/05/2010 12:02:03 Asynchronous send of data package 1 in task 0002 (1 parallel tasks)
08/05/2010 12:02:06 IDOC: Info IDoc 2, IDoc No. 1576298, Duration 00:00:01
08/05/2010 12:02:06 IDoc: Start = 08/05/2010 10:26:37, End = 08/05/2010 10:26:38
08/05/2010 13:02:38 Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 10,958 records
08/05/2010 13:11:48 Result of customer enhancement: 10,958 records
08/05/2010 13:11:52 Asynchronous send of data package 2 in task 0003 (1 parallel tasks)
08/05/2010 13:11:53 tRFC: Data Package = 1, TID = 0AA00D0301984C5AEE8E44DB, Duration = 00:16:
08/05/2010 13:11:53 tRFC: Start = 08/05/2010 12:02:19, End = 08/05/2010 12:18:27
08/05/2010 14:30:13 Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 11,296 records
08/05/2010 14:39:53 Result of customer enhancement: 11,296 records
like this its taking 24 hours in extraction its self.
Edited by: kotha123 on Aug 10, 2010 12:08 PM
Edited by: kotha123 on Aug 10, 2010 12:09 PM -
Unable to extract the data from ECC 6.0 to PSA
Hello,
I'm trying to extract the data from ECC 6.0 data source name as 2LIS_11_VAHDR into BI 7.0
When i try to load Full Load into PSA , I'm getting following error message
Error Message: "DataSource 2LIS_11_VAHDR must be activated"
Actually the data source already active , I look at the datasource using T-code LBWE it is active.
In BI on datasource(2LIS_11_VAHDR) when i right click selected "Manage" system is giving throughing below error message
"Invalid DataStore object name /BIC/B0000043: Reason: No valid entry in table RSTS"
If anybody faced this error message please advise what i'm doing wrong?
Advance thanksECC 6.0 side
Delete the setup tables
Fill the data into setup tables
Schedule the job
I can see the data using RSA3 (2LIS_11_VAHDR) 1000 records
BI7.0(Service Pack 15)
Replicate the datasource in Production in Backgroud
Migrate Datasource 3.5 to 7.0 in Development
I did't migrate 3.5 to 7.0 in Production it's not allowing
When i try to schedule the InfoPakage it's giving error message "Data Source is not active"
I'm sure this problem relate to Data Source 3.5 to 7.0 convertion problem in production. In Development there is no problem because manually i convert the datasource 3.5 to 7.0
Thanks -
Not able to extract performance data from .ETL file using xperf commands.
Xperf Commands:
xperf –i C:\TempFolder\Test.etl -o C:\TempFolder\BootData.csv –a process
Getting following error after executing above command:
"33288636 Events were lost
in this trace.
Data may be unreliable
This is usually caused
by insufficient disk bandwidth for ETW lo
gging.
Please try increasing the minimum
and maximum number of buffers
and/or
the buffer size.
Doubling these values would be a good first at
tempt.
Please note, though, that
this action increases the amount of me
mory
reserved
for ETW buffers, increasing memory pressure on your sce
nario.
See "xperf -help start"
for the associated command line options."
I changed page size file but its does not work for me.
Any one have idea, how to solve this problem and extract ETL file data.I want to mention one point here. I have total 4 machines out of these 3 machines above
commands working properly. Only one machine has this problem.<o:p></o:p>
Hi,
I consider that you can try to use xperf to collect the trace etl file and see if it can be extracted on this computer:
Refer to following articles:
start
http://msdn.microsoft.com/en-us/library/windows/hardware/hh162977.aspx
Using Xperf to take a Trace (updated)
http://blogs.msdn.com/b/pigscanfly/archive/2008/02/16/using-xperf-to-take-a-trace.aspx
Kate Li
TechNet Community Support -
How to extract Inventory data from SAP R/3 system
Hi friends How to extract Inventory data from SAP R/3 system? What are report we may expect from the Inventory?
Hi,
Inventory management
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how%20to%20handle%20inventory%20management%20scenarios.pdf
How to Handle Inventory Management Scenarios in BW (NW2004)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Loading of Cube
ref.to page 18 in "Upgrade and Migration Aspects for BI in SAP NetWeaver 2004s" paper
http://www.sapfinug.fi/downloads/2007/bi02/BI_upgrade_migration.pdf
Non-Cumulative Values / Stock Handling
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31
Non-Cumulatives
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62ebe07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62f8e07211d2acb80000e829fbfe/frameset.htm
Here you will find all the Inventory Management BI Contents:
http://help.sap.com/saphelp_nw70/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm
2LIS_03_BX- Initial Stock/Material stock
2LIS_03_BF - Material movements
2LIS_03_UM - Revaluations/Find the price of the stock
The first DataSource (2LIS_03_BX) is used to extract an opening stock balance on a
detailed level (material, plant, storage location and so on). At this moment, the opening
stock is the operative stock in the source system. "At this moment" is the point in time at
which the statistical setup ran for DataSource 2LIS_03_BX. (This is because no
documents are to be posted during this run and so the stock does not change during this
run, as we will see below). It is not possible to choose a key date freely.
The second DataSource (2LIS_03_BF) is used to extract the material movements into
the BW system. This DataSource provides the data as material documents (MCMSEG
structure).
The third of the above DataSources (2LIS_03_UM) contains data from valuated
revaluations in Financial Accounting (document BSEG). This data is required to update
valuated stock changes for the calculated stock balance in the BW. This information is
not required in many situations as it is often only the quantities that are of importance.
This DataSource only describes financial accounting processes, not logistical ones. In
other words, only the stock value is changed here, no changes are made to the
quantities. Everything that is subsequently mentioned here about the upload sequence
and compression regarding DataSource 2LIS_03_BF also applies to this DataSource.
This means a detailed description is not required for the revaluation DataSource.
http://help.sap.com/saphelp_bw32/helpdata/en/05/c69480c357354a8846cc61f7b6e085/content.htm
http://help.sap.com/saphelp_bw33/helpdata/en/ed/16c29a27db6e4d81a015be8673eb80/content.htm
These are the standard data sources used for Inventory extraction.
Hope this helps.
Thanks,
JituK -
How to extract PS data from sap r/3 to bw
Hi,
How to extract PS data from sap r/3 to bw
PS data like plans,budget,accurals&commitmnets
can any one help me regarding this..
Thanks in Advance,
Shankar.HI sankar,
you can refer the belkow link to find the details on the relevant extractors and infoproviders
http://help.sap.com/erp2005_ehp_04/helpdata/EN/17/416d030524064cb2b8d58ffb306f3a/frameset.htm
Regards,
Sathya -
How can I extract the data from Xstring .
Hi Gurus ,
How can I extract the data from a XSTRING .
I have to get the data which is filled in the survey form the data is getting saved in form of xstring .
Someone told me that there is a standard FM for that . but I am not able to find .
Please reply with the FM in case some one knows about it .
Thanks in advance .The following code works as of 7.0 (in any SAP system):
FORM XSTRING_TO_STRING USING input TYPE xstring CHANGING output TYPE string.
TYPES : BEGIN OF ty_struc,
line TYPE c LENGTH 100,
END OF ty_struc.
DATA lt_char TYPE TABLE OF ty_struc.
DATA length TYPE i.
length = xstrlen( input ) / cl_abap_char_utilities=>charsize.
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
buffer = input
tables
binary_tab = lt_char.
CONCATENATE LINES OF lt_char INTO output RESPECTING BLANKS.
output = output(length).
ENDFORM.
Edited by: Sandra Rossi on Mar 30, 2010 12:24 AM
Maybe you are looking for
-
<B>hello </B> <BR> i have a simple question .as all of us when make a small application that is accessible over the web has two parts(always).one is for all users of this site and other only for administators. front end accessible over the web is jsp
-
Where can i buy a replacement trackpad for my macbook pro with retina display
recently the new force touch trackpad is out and I'm really excited about it and sometimes my multi-touch trackpad is a little glitchy so I'm wondering is there any place to buy a replacement trackpad for my macbook like multi-touch or force click tr
-
Black & White quartz filter behaves oddly when creating PDFs
I think the Black and White Quartz Filter should print all colours and greys as Black. But pale colours and light greys are not printed at all, presumably they are 'White'. Printing all colours as Black is a useful property when printing CAD drawings
-
Mac-mini will not boot up.
After downloading the latest OSX version for my mac-mini model A1283, it attempted to automatically re-start and stopped with a graphic on the screen and no control of the cursor. It will not boot up. No screen at all. Keyboard SHIFT key light does n
-
XServe won't boot from any drive, but recognizes them in OS X Installer
I know I have another post here but this is a different issue, and I've already fixed that one thanks to Camelot . I just received an 2 used xserves for work. One booted into OS X Server fine, so I scrubbed it and reinstalled without issue. The secon