Extraction Procedure for DataSource 0FI_GL_1 and 0FI_GL_2 for BW

Hi Gurus,
I was just wondering if there is any special extraction procedure if i want to use DataSources 0FI_GL_1 and 0FI_GL_2. I have already activated the datasources in an Old R/3 version 4.6b and have done all the mapping and loading. My only concern is the scheduled loading of the data. How do I deal with the changes because I 've read in a couple of White Papers that these specific datasources have No Delta Extraction. Will I have a scheduled deletion of data and have a full load everytime i want to load the new data? Any help will be most appreciated. Thank you in advance.
- Kit

Hi,
0FI_GL_1 and 0FI_GL_2 support only Full loads. To delete the previous request you can schedule it in the Process Chain delete request variant.
SAP has provided Delta enabled DataSources for these. 0FI_GL_6 instead of 0FI_GL_1 and 0FI_GL_7 instead of 0FI_GL_2.
[0FI_GL_6|http://help.sap.com/saphelp_nw70/helpdata/en/0a/558cabb2e19a4db3097b81bba4fd0e/frameset.htm]
[0FI_GL_7|http://help.sap.com/saphelp_nw70/helpdata/en/78/fc168f3955754c8bf1474870138a53/frameset.htm]
Hope this helps.
Regards,
Gaurav

Similar Messages

No data in 0FI_GL_1 and 0FI_GL_6

Dear All,
Any pre setting is requir,
i am not getting data in rsa3 for datasource 0FI_GL_1
and 0FI_GL_6 in r/3.
please provide me your inputs.
we are in BI 7.

May be the functional team is not using Old Totals Table GLTO . ( Non Delta Capable 0FI_GL_1 & Delta Capable 0FI_GL_6 )
Check out data for datasource 0FI_GL_10 - > FAGLFLEXT - New Totals Table .
Also, communicate with Functional Folks abt the line items as well.
May be the functional team is not using Old Line ItemsTable BSEG/BKPF .
FAGLFLEXA - New Totals Table
You have create a custom datasource for line items basing on FAGLFLEXA.

How to extract values from pricing procedure for conditions in CRM Billing?

I have a number of conditions in the pricing procedure in CRM Billing that I would like to extract to SAP BW. How can this be done?
Is there a standard extractor for CRM Billing similar to the SD Billing extractor "Extraction of SD Billing Conditions" (2LIS_13_VDKON)?
If there is no standard extractor, is there another way to extract the conditions and the related values?
I am using the standard CRM Billing Extractor 0BEA_CRMB already, so maybe an append could solve my problem. How can this be done? In what CRM-tables can I find the values from pricing procedure for conditions in CRM Billing?

you may want to post that last question in a CRM forum... in ECC it would be table KONV

Procedures for implementing a snapshot scenario with custom DataSources

Hi Gurus,
I have checked the How To paper ([How to Handle Inventory Management Scenarios in BW (NW2004)|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328]). However, only SAP standard BW objects are mentioned in the paper e.g. InfoCube (0IC_C03), Material Stock InfoSource (2LIS_03_BX), Material movements IS (2LIS_03_BF) and Revaluations IS (0LIS_03_UM).
On the contrary, I need to handle custom DataSources for the Snapshot scenario. Are there any differences in the implementation methodology? Which additional aspects should I take into consideration? For example, the load sequence, delta type, etc.
Could you please list out the step-by-step procedures for such an implementation?
Thanks in advance!
Regards,
Meng

Hi Meng,
You can approach this in two ways.
1) If the volume of data is not much, you can derive the balance at query level, as follows.
User enters the date, based on this restrict your key figure to display all values less than this date.
2) If the volume of data is high, then you will have issues with performance if you are calculating the balance in the front end. In this case, you can model this with 'Non cumulative' key figure. Again there are 2 ways of approaching this back end solution based on the volume of data. ( Say in one case you have 2 years of history in your DSO and in the second case, you have 5 years of history ).
A) For example, If there are only 2 years of history
Create a non cumulative Key figure 'ZBALANCE' with inflow and outflow, in a cube.
Map this to your credit and debit as + and - respectively and map the calender day to posting date.
Just initialise the dataload with data transfer and start loading the delta as normal.
You will be able to see the balances for each and every calday in your reporting.
This approach is straight forward and simple.
Compress the cube for getting the better performance.
B) If there are 5 years of history and you are not interested in loading all the 5 years data in getting the balance
Here you want to have the initial balance, continue delta and would like to load 2 years of history.
The cube and non cumulative KF are created as mentioned above.
For generating initial balance, you have to create another DSO without calander day and ZBalance mapped to credits and debits in additive mode. Load your DSO data into this new DSO to generate initial balance. This balance will be loaded to your cube as initial balance. ( Like 2LIS_03_BX ).
You have to compress this request with marker update ( Must ).
Load your historical data for 2 years from the original DSO. Compress without marker update ( Must ).
initialise without data transfer from DSO to cube and load deltas normally.
Compress the delta requests normally for performance reasons.
Please read the 'Inventory document' in detail.
Please let me know, if any of the information is still not clear.
Thanks,
Krishnan

Question for procedure as datasource

Hello expert,
      I have a crystal report as store procedure as datasource as follows:
        {Call procedure ({?par 1},{?par 2}, {?par 3})}
     three parameters are all optional in the procedure. but when I input value for par1 and par2 without input value for par3 in the crystal report, report running failed. because in the case, I should use following datasource:
          {Call procedure ({?par 1},{?par 2})}
    I know I can define those parameter as crystal report parameter to resolve it, but performance is bad. so I have to keep those parameters in the procedure.
    will you please help me to figure out the way for it? Appreciate very much.

If you just connect crystal directly to stored procedure instead of going via a command object then Crystal creates relevant paramters and null values can be added/used.
Ian

How to check IGS version and procedure for upgrading IGS patch level

Hi all,
We are on BIW 3.5 .Iam not clear about how to check the version of IGS and its patch level .I went through various notes but still iam confused with tracing it , can someone plz help out?
Secondly want to upgrade IGS version i went through note 454042 but still confused with doing that , Can someone plz refer other notes or detailed procedure for upgrading IGS.
Our BIW Production and Test are on AIX and Development is on HP-Unix OS .
Points guaranteed for the same. Requested to revert at earliest as this is urgent .
Regards,
Saumya

Hi,
Check this link which may help u:
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/igs-upgrade-1455477
The installation/upgrade procedures for the integrated IGS are as follows:
Integrated Version Installation
The integrated IGS is automatically installed with the SAP Web Application Server.
Integrated Version Upgrade
You find the upgrade files for the integrated IGS version on the SAP Service Marketplace:
http://service.sap.com/swdc ® Download ® Support Packages and Patches ® Entry by ApplicationGroup ® SAP Frontend Components ® SAP IGS ® SAP IGS .
There, you find the IGS executables and libraries (igsexe_.sar) as well as the IGS folder structure (igshelper_.sar) containing among others font files.
With the upgrade files of the executables and libraries, proceed exactly like you would with kernel patches (for example, extract the Archive to the same location). More information about kernel patches can be found in the related note 19466 in the section Copying and Installing a Patch.
The upgrade files for the IGS folder structure must be extracted to the instance directory (DIR_INSTANCE). More information can be found in note 1028690.
After a restart of the Web AS the new IGS is up and running.
Information about finding out your IGS patch level is provided in note 931900.
For an upgrade of an integrated IGS please also check note 896400.
For more info check this SAP Help doc:
http://help.sap.com/saphelp_nw04s/helpdata/en/4b/72d43ac66e1f08e10000000a114084/frameset.htm
Hope these helps u...
Regards,
KK.

Step by step procedure for copa extraction

hi experts,
            what are the steps involved in copa extraction, please give me step by step procedure for copa extraction.
Thanks,
Rk

Hi Rama Krishna
     COPA STEPS
     SERVER R/3 SERVER  CONTOLLING & PROBALITY ANALYSIS  ENTER COPA WITH T-CODE 9TRANSACTION CODE KEBO)  CREATE (OPERATING CONCERN ; IDEAS (CLICK ON EXCUTE)  ENTER (SHORT TEXT,MEDIUM TEXT,LONG TEXT)  FIELD NAME FROM PERITION ; BURKS  DESLECT SOME VALUE FIELDS  LICK ON CHECK BUTTON  CLICK ON SUMMATIATION LEVEL CLICK ON INFO CATALOG  IT GOES TO ATA SOURE [CUSTOMER VERSION EDIT.  SELECT IN SELECTION , HIDE FIELD  CLICK ON SVE BUTTON  NEXT CLICK ON GENERATE  GO BACK  TO CHECK THE DATA IN COPA DATA SOURCE  T- CODE RSA3 IMP  DATA SOURCE  1-CO PA800 STISH  CLICK ON EXTRACTION.
     SERVER BW SYSTEM  GO TO INFO SOURCE YSTEM  SELECT YOUR SOURCE SYSTEM  DOUBLE CLICK ON SOURCE SYSTEM  SELECT BW DATA SOURCE  SAP APPLICATION COMPONENTS  CONTROLLING  PROFITABILITY ANALYSIS  RIGHT CLICK  REPLICATE DATA SOURCES  ELECT COPA DATA SOURCE (R.C)  SELECT REPLICATE DATA SOURCE  DOUBLE CLICK ON DATA SOURES  APPLICATION PROPOSAL  1-CO-PA800 SATISH  CLICK ON TRANSFER BUTTON  YES  PROPOSE TRANSFER RULES  IF WARNING OCCURS SAY CONTINUE  ACTIVATE  GO BACK  CREATE INFO AREA  INFO PROVIDER  CREATE INFO CUBE  INFO SOURCE  1-CO PA8000SATISH  CREATE UPDATE RULES  GO BACK TO INFO SOURCES  REFERESH  FIND THE 1-CO-PA800  PC ON SOURCE SYSTEM AND CREATE INFO PACKAGE  SCHEDULER  MONITOR.
Regards
Ashwin

Latest update of Muse is not installing on several tries,installation gets stuck at 43% and shows '' waiting'' at the ''Extracting'' stage for 7-8 hours after which it does not progress

latest update of Muse is not installing on several tries,installation gets stuck at 43% and shows '' waiting'' at the ''Extracting'' stage for 7-8 hours after which it does not progress.

Refer to EX11....
Creative Cloud Error Codes (WIP) | Mylenium's Error Code Database
Mylenium

What is the procedure for a hard boot of my iPod touch 4th generation without itunes, and without computer, and without iPod data screen.?

What is the procedure for a hard boot of my iPod touch 4th generation
without iTunes, and without computer, and without iPod data screen?
6 months after purchase I updated my iPod touch as recommend by iTunes.
It has not worked since that day. It frozen (disabled) with a "connect to
iTunes" icon displayed...that is the only thing it does. itunes does not
recognize the iPod. My Windows7 computer recognizes an Apple device.
Other computers recognize the devise but if iTunes resided on that
computer it did not recognize the iPod
I suffered a setback with deep depression and am just now getting out of it enough to do something. The depression prohibited me from taking action.
I have done every procedure recommended from Apple help and external
sources. I did this thoroughly with help for other owners and IT experts,
Apple employees etc etc. I and associates have perform reboots utilizing a
number procedure using only button on the iPod. These were unsuccessful
also have performed.
Please do not ask me to do the usual.
Online I saw a process using the buttons on the iPod to completely
reformat
the iPod. It was NOT the hold buttons for 10 sec let go of one wait 8 sec
etc. I can not find the process now...a friend showed it to me in passing
I have lost contact with him. This is the procedure, I believe, that with
enable me to update and use the iPod.

You need an internet connection and likely a computer with iTunes but an iPhone, iPad or iPod touch with the FindMy iPhone App may work by:
If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone and use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
You can also wipe the iOS device by installing the FindMyiPhone app on another iOS device and using that app to wipe the device.
Otherwise
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
Yo may have to go to an Apple store or a friend's house with an internet connection and iTunes.

Stored Procedure for Batch Number Format and Block Duplicate Batch Number

Hi Experts !
I am new one in forum asking question.. I want Stored procedure for Batch Number Format. I want fix one Batch number format in Stored Procedure.
Example :
My Batch number format Like BATCH00001 - It should be first five digit is text format and next five is Numeric.
IF create Goods receipt PO or Goods receipt stage I create batch number like BATCH 00001 or any other number means don't add that document and also duplicated batch number also does not allowed. please give me the solutions. I am sorry for my bad english .

Dear Nagarajan K.
                     Thanks for your replay ..
IF @transaction_type IN ('A','U') AND (@object_type = '106' )
BEGIN
set @item = LEFT( @list_of_cols_val_tab_del, CHARINDEX(CHAR(9), @list_of_cols_val_tab_del,1) - 1)
set @batch = substring(@list_of_cols_val_tab_del, len(@item)+1, (CHARINDEX(CHAR(9), @list_of_cols_val_tab_del,len(@item)+2)) - (len(@item)+1))
--set @base =( select basetype from ibt1 where batchnum = ltrim(rtrim(replace(@batch,char(9),''))))
set @count = (select count(*) from oibt quantity > 0 and where batchnum = ltrim(rtrim(replace(@batch,char(9),''))))
if @count > 1
begin
set @error = 1
set @error_message = 'Please enter different Batch Code for batch ''' + @batch + ''' for item ' + @item
select @error, @error_message
END
END
              I used above Stored Procedure. here we can use one batch number for different item but i want to block one batch we should use one item and one time only after than we never use that batch number for same item and another item.
         After that I want format for Batch, we should follow unique Batch number for all items.

Stored procedure for getting host name, host instance and status of that host is it running or stopped.

Hello all,
yesterday I got one task in that I have to stored procedure for getting host name, host instance and status of that host is it running or stopped.
any body knows where exactly, In which table this details are there in BizTalk databases.
thanks

Status of the host instance is not stored in the SQL database for you to query the status using stored procedure. You have to either use Powershell or WMI to get the status.
In SQL, following table contains the details about the host like Name, LoginName, IsDisables etc but status of the host instance is not stored in the database.
SELECT * FROM BizTalkMgmtDb..adm_HostInstance
Powershell to get the status:
http://axonolympus.nl/?page_id=186&post_id=969&cat_id=6&lang=en
WMI to get the status:
https://msdn.microsoft.com/en-us/library/aa561820.aspx?f=255&MSPPError=-2147217396
https://msdn.microsoft.com/en-us/library/aa578621.aspx
Regards,
M.R.Ashwin Prabhu
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Diff pricing procedure for invoice and sales order?

can u please help me out in the following question
Is it possible to have different pricing procedure for sales order and invoice?

hi venkat,
yes we can very well have different pricing procedures for order and invoice. for the combination of
sales org + dist chan + div + <b>document pric proc</b> + cust pric proc --- > Pric Proc.
we determine the pric procedure. So, just have a different document pricing procedure for sales order document type and invoice document type. You can have a different pricing procedure with this change.
Hope it helps. Pl reward if useful.
Thanks
Sadhu Kishore

Can any one send procedure for integration between XI and Geographic inform

can any one send procedure for integration between XI and Geographic information System(GIS).
Please clarify ASAP..
Thanks

Hi,
Please see the below links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d53af8ca-0801-0010-08b0-dce9e02130a8
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d53af8ca-0801-0010-08b0-dce9e02130a8
GIS VS XI
Regards
Chilla..
Points rewarded if it is usefull..<i></i>

Different weighting procedure for estimating reads and billing.

Is there any way to use a weighting procedure for billing that's different from what's used in meter read estimation? We'd like to bill with linear weighting but not for meter read estimation.

hi Vlado,
Wanted some clarification on enhancement EDMLELHA.
If we maintain the special procedure does it mean that it shall override the weighing key(for extrapolation) as maintained in the register group,operands and during full installation process while we estimate the Meter Reading.
Also Define Estimation Parameters for Meter Reading Result Entry is triggered when
1. Meter reading note for estimation is entered
2. while using transaction EL30(when not using the enhancement)
so shall the enhancement EDMLELHA get triggered on executing either of them ?
As we generally use 1 & 2 for overestimating.(adding up more units to an already estimated MR),
so the confusion if it can completely ignore the weighting key maintained and give an estimated result on a probably different weighting key.

Procedure for CICS adapter and XI integration?

Dear All,
Can you plz provide me the step by step procedure for CICS adapter and XI integration?
Thanks,
Srinivas.

Hi ,
Check this link..
http://www.iwaysoftware.com/products/adapters/CICS_IMS_Transaction_Processing.html
Regards,

Extraction Procedure for DataSource 0FI_GL_1 and 0FI_GL_2 for BW

Similar Messages

Maybe you are looking for