Extractor to get Classification data from R3 (specifically AUSP table)

Hello,
I have a requirement to get classification data from R3 to BW.
I have explored the following post
Classification data extraction
which discusses steps to get the datsource created using transaction CTBW
However this approaches requires us to specifiy the *fixed list of characteristics required.
So when new characteristic are added we would again have to regenerate the datasource and update the data flow in BI.
We need to get the entire classification data to BI. In our case it is possible to get new characteristics added in R/3 periodically and which would need to come to BI seamlessly.
Did anyone have a similar requirement in the past ? Are there any BADI, BTEs I could use?
Thanks
-Saif

Hi Saif,
datasources created with CTBW do extract one row for each classified object. Therefore CTBW generates an extract structure based on the set of characteristics which have been specified there. For extracting additional characteristics you will need to add them in CTBW and to generate the datasource again. There is no way to overcome this. So datasources created with CTBW cannot fulfill your demand.
You will have to create your own datasource from scratch. This datasource will need to return one row for each found value to be flexible enough and to be able to work with one extract structure that doesn't need to be changed.
In general the way how classifications are stored is quite complex and depends on settings in customizing of classification. So I would recommend to create a datasource based on your own function module. This could call BAPI_OBJCL_GETOBJECTS to find the classified objects and BAPI_OBJCL_GETDETAIL to read the valuations. For more information see please documentation of these BAPIs. Additional information on BAPI_OBJCL_GETDETAIL you will find in SAP note 1083983.
Best regards,
Rolf

Similar Messages

How to get the data from 2 out ports (tables) of BAPI into one table

I have a BAPI that has two out ports (header and detail). How do I display this data in one table.
Thanks,
Subba

Hi,
you have the Union operator to merge multiple datasets into one dataset
regards Tobias

Retrieval of Data from More Than Two tables

Hi Experts,
How to get the data from more than two tables.
By using Jdbc, and through only core java.
I mean if i entered some empid at command prompt,
then the complete data (where empid is presented at some tables like L1,L2,L3,L4.) is to be displayed.
Bye
TulsiRam Mohan.
Message #196971

Is creating view on these 4 tables is an option ?
Something like :
Select * from a
union all
select * from b
... and so on ?

Extract Classification data from R/3 for XI

Hi all
I am currently interning with a corporation and am stuck at a crucial point.
I tried using MATMAS/MATMAS05 and CLFMAS/CLFMAS02 for extracting the classification data from R/3 systems. i want to primarily generate valid iDoc's and transport them to XI later.
However, everytime I run the extraction object MATERIAL_EXTRACT from mdm_clnt_extr, the iDoc's generated have no classification data...
am stuck ppl... my colleagues say i should try looking for a new extractor for CLFMAS specifically..
Please help.

HI,
Guess I did not state the problem clear enough.
The T-Table incorporates only the material number. I need to get different classification fields for all relevant materials.
So I am looking for a way to extract the classification data associated with the material numbers in my Z-table.
Anybody got an Idea?
Thanks for your help,
Regards,
Minima

How to get purchasing data from SAP R/3 to Flat files

Hi,
Please can anyone help me to get the data from Purchasing extractors (2LIS_02_ITM, 2LIS_02_SCL, 2LIS_02_S012) to flat files? Here we dont want to load data from R/3 to BW for reporting, wanted to load data from flat files to OWB (Oracle warehouse builder) for reporting. So Is there anyway to generate data into flat files from Purchasing extractors (Full and deltas)?
Thanks,
Pavan.

Hello,
here is a short report which converts S012 entries to strings with separator semicolon. Perhaps this will help you?
Regards
Walter Habich
REPORT habitest2 LINE-SIZE 255.
TYPES:
strtab_t TYPE TABLE OF string.
CONSTANTS:
separator VALUE ';'.
DATA:
it_s012 LIKE s012 OCCURS 0,
wa_s012 LIKE s012,
strtab TYPE strtab_t,
strele TYPE string.
SELECT * FROM s012 INTO TABLE it_s012 UP TO 100 ROWS.
PERFORM data_to_string
TABLES
    strtab
USING
    'S012'. "requires it_s012 and wa_s012
LOOP AT strtab INTO strele.
WRITE: / strele.
ENDLOOP.
*&      Form data_to_string
FORM data_to_string TABLES strtab TYPE strtab_t
                    USING ittab TYPE any.
DATA:
    h_zaehler TYPE i,
    line_str TYPE string,
    l_tabellenname(10) TYPE c,
    l_arbeitsbereichsname(10) TYPE c,
    h_string TYPE string,
    h_char(255) TYPE c.
FIELD-SYMBOLS: <l_tabelle> TYPE ANY TABLE,
                 <l_arbeits> TYPE ANY,
                 <feldzeiger> TYPE ANY.
CLEAR strtab.
CONCATENATE 'IT_' ittab INTO l_tabellenname.
ASSIGN (l_tabellenname) TO <l_tabelle>.
CONCATENATE 'WA_' ittab INTO l_arbeitsbereichsname.
ASSIGN (l_arbeitsbereichsname) TO <l_arbeits>.
LOOP AT <l_tabelle> INTO <l_arbeits>.
    CLEAR: h_zaehler, line_str.
    line_str = ittab.
    DO.
      ADD 1 TO h_zaehler.
      ASSIGN COMPONENT h_zaehler OF
        STRUCTURE <l_arbeits> TO <feldzeiger>.
      IF sy-subrc <> 0. EXIT. ENDIF.
      WRITE <feldzeiger> TO h_char LEFT-JUSTIFIED.          "#EC *
      h_string = h_char.
      CONCATENATE line_str separator h_string INTO line_str.
    ENDDO.
    APPEND line_str TO strtab.
ENDLOOP.
ENDFORM.                    "data_to_string

How to get the data from the model node like a table ?

I want to get the data from the model node once a record ,and the node is bound to a internal table in the RFM which I called in the R/3 system. Who can give me some advice to achive it?Thank you!!

Hi,
To get the data from the node:
wdContext.node[your node name].current[node name]_InputElement().get[specific element in the node];
or you van use:
wdContext.current[your node]Element().get[your element in the node];
examples:
wdContext.nodeZ_Mepro_Po_Detail_Stock_Distri_Input().currentZ_Mepro_Po_Detail_Stock_Distri_InputElement().getUcpd_Flag();
wdContext.currentT_Delv_ReqsElement().getShelflife();
regards,

I recently restored my iPhone 4s from back-up after being reset. An app that I had turned off in back-up did not show up in my recent resoration. I forgot to turn that app back on. Would there be any way I would be able to get the data from that app?

I recently restored my iPhone 4s from back-up after being reset. An app that I had turned off in back-up did not show up in my recent resoration. I forgot to turn the app back on. Would there be any way I would be able to get the data from that app onto my phone? Is it possible to put an old back-up on my phone?

LukaPetranovic wrote:
Hello anita4323.
I hope this will help you with your problem:
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
You can restore your backup whenever you want from iTunes or iCloud, depending where you made it.
Let us know if you succeeded or need any further help.
I believe you are missing the point. The OP has already restored from back up, but failed to include a specific app in the back up and is trying to recover data for it, which in this case is not possible.

Need to copy Data from a specific Html Tag

Hello,
I am trying to use CF to access website and capture data from a specific tag to the end of that tag and store same in a csv file or database.
The tag based search of an open file is where I am not able to get any head way. Any one has done this?

You'll need to use a regular expression for that. CF supports regular expressions with the REFind, REFindNoCase and REReplace functions. Here's an example of using regular expressions to capture the value within an HTML tag:
http://www.javamex.com/tutorials/regular_expressions/example_scraping_html.shtml
It's in Java, but the syntax for regular expressions is the same in CF.
Dave Watts, CTO, Fig Leaf Software
http://www.figleaf.com/
http://training.figleaf.com/
Fig Leaf Software is a Veteran-Owned Small Business (VOSB) on
GSA Schedule, and provides the highest caliber vendor-authorized
instruction at our training centers, online, or onsite.
Read this before you post:
http://forums.adobe.com/thread/607238

How can I link specific cells in two different speadsheets so the data from a specific cell in spreadsheet A automatically updates in a specific cell in spreadsheet B. It works in Xcel- Any ideas?

How can I link specific cells in two different tables so the data from a specific cell in table A automatically updates in a specific cell in table B? It works in Xcel- Any ideas?

(1) your title ask the way to link different spreadsheets.
In Numberland, a spreadsheet is an entire document.
There is no way to link different documents.
(2) in the message, you ask the way to link different tables.
This feature is available and is described in iWork Formulas and Functions User Guide (which is available for free from the Help menu).
Getting the info just requires a simple search in this available resource !
Yvan KOENIG (VALLAURIS, France) 14 mai 2011 10:37:50

RFC to get the data from HR Infotypes

Hi,
We have a requirement to get the data from infotypes for a particular personnel number. Can anybody tell me the RFC for extracting the data from the infotypes?
Thanks in advance

Hi Shaikh,
Here are few more which got missed out:-
BAPI_EMPLCOMM_GETDETAIL - Communication infotype - infotype 0105
BAPI_INTCONTROL_GETDETAIL - Internal cont - infotype 32
BAPI_PDOTYPES_GETDETAILEDLIST - PD infotypes
BAPI_ABSENCE_GETDETAIL - infotype 2001
BAPI_W4W5INFOUS_GETDETAIL - W4/W5 info of an emp - infotype 210
BAPI_DATESPECS_GETDETAILEDLIST - Date specifications -infotype 41
RFC_ABSENCETYPES_READ - RFC which Lists absence types
HR_BEN_READ_CREDIT_PLANS - RFC for reading credit plans
HR_BEN_READ_INSURE_PLANS - RFC for reading insurance plans.
HR_BEN_READ_HEALTH_PLANS_RFC RFC for Reading Health plans
Hope this helps.
Kindly reward if useful.
Regards & Thanks,
Darshan Mulmule

How to get the data from a cluster table to BW

Dear All,
I want to extract the data from R/3 to BW by using 2 tables and one Cluster B2.
Actually my report contains some fields from PA2001, PA2002 and one cluster table B2 (Table ZES). Can I create View by using these 3 tables? If it is not possible how can I get the data from the cluster? Can I create generic datasource by using cluster tables directly?
In SE11 Transaction the Cluster (table ZES) is showing invalid table.
I referred some Forums, but no use.
Can any body tell me procedure to get the data from a cluster (table ZES) ?
Waiting for you results.
Thanks and regards
Rajesh

HI Siggi,
Thank you for your reply..
I am also planning to do FM to get the data. But it is saying that the Cluster table ZES does not exist (ZES is the the standard table, in SE11 also).
How can I use the Fields from the that table.?
What can I do now, can you please explain me about this point.
Waiting for your reply.
Thanks and Regards
Rajesh
Message was edited by:
rajesh

Why do we get the data from a view to a report.

hi
why do we get the data from a view to a report. is it possible to get the data from a view in all the cases?

hi Jyotssna,
Suppose you are planning to get the data from multiple tables then you got to specify seveal condtions and make use of joins which results in poor performance in fetching the data . In order to improve the performance we make use of views where the conditions of different tables are defined and the data is fetched accordingly.
Regards,
Santosh

Unable to get the data from the stored procedure

Hello Folks,
I have this stored procedure and am trying to get the data from the table stage_bill but for some reason i am not sure its not pulling the data.Am a beginner in pl/sql Can any one please help to find out. I can give the code below.
create or replace procedure Load_FADM_Staging_Area_TEST(p_data_load_date date) is
-- local variables
v_start_date                date;
v_end_date                  date;
-- cursor starting
CURSOR c_get_data
IS
SELECT
   a.batch_id
,a.beginning_service_date
,a.bill_id
,a.bill_method
,a.bill_number
,a.bill_received_date
,a.bill_status
,a.bill_type
,a.change_oltp_by
,a.change_oltp_date
,a.client_datafeed_code
,a.client_id
,a.created_date
,a.date_of_incident
,a.date_paid
,a.deleted_oltp_by
,a.deleted_oltp_date
,a.duplicate_bill
,a.ending_service_date
,a.event_case_id
,a.event_id
,a.from_oltp_by
,a.oltp_bill_status
,a.review_status
,'HRI' schema_name
, sysdate Load_date
,'ETLPROCESS001' Load_user
,v_start_date as Row_Effective_Date
,null Row_End_date
from stage_bill a
where
--created_date >= to_date('20101031 235959', 'YYYYMMDD HH24MISS')
created_date >= v_start_date
and
--created_date <= to_date('20101111 235959', 'YYYYMMDD HH24MISS')
created_date <= v_end_date
and not exists
(select
b.batch_id
,b.beginning_service_date
,b.bill_id
,b.bill_method
,b.bill_number
,b.bill_received_date
,b.bill_status
,b.bill_type
,b.change_oltp_by
,b.change_oltp_date
,b.client_datafeed_code
,b.client_id
,b.created_date
,b.date_of_incident
,b.date_paid
,b.deleted_oltp_by
,b.deleted_oltp_date
,b.duplicate_bill
,b.ending_service_date
,b.event_case_id
,b.event_id
,b.from_oltp_by
,b.oltp_bill_status
,b.review_status,
b.schema_name,
b.Load_date,
b.Load_user,
b.Row_Effective_Date,
b.Row_End_Date
from STG_FADM_HRI_STAGE_BILL_TEST b)
-- cursor o/p variables
v_batch_id                  stage_bill.batch_id%TYPE;
v_beginning_service_date    stage_bill.beginning_service_date%TYPE;
v_bill_id                   stage_bill.bill_id%TYPE;
v_bill_method               stage_bill.bill_method%TYPE;
v_bill_number               stage_bill.bill_number%TYPE;
v_bill_received_date        stage_bill.bill_received_date%TYPE;
v_bill_status               stage_bill.bill_status%TYPE;
v_bill_type                 stage_bill.bill_type%TYPE;
v_change_oltp_by            stage_bill.change_oltp_by%TYPE;
v_change_oltp_date          stage_bill.change_oltp_date%TYPE;
v_client_datafeed_code      stage_bill.client_datafeed_code%TYPE;
v_client_id               stage_bill.client_id%TYPE;
v_created_date          stage_bill.created_date%TYPE;
v_date_of_incident    stage_bill.date_of_incident%TYPE;
v_date_paid         stage_bill.date_paid%TYPE;
v_deleted_oltp_by     stage_bill.deleted_oltp_by%TYPE;
v_deleted_oltp_date    stage_bill.deleted_oltp_date%TYPE;
v_duplicate_bill     stage_bill.duplicate_bill%TYPE;
v_ending_service_date   stage_bill.ending_service_date%TYPE;
v_event_case_id        stage_bill.event_case_id%TYPE;
v_event_id            stage_bill.event_id%TYPE;
v_from_oltp_by         stage_bill.from_oltp_by%TYPE;
v_oltp_bill_status   stage_bill.oltp_bill_status%TYPE;
v_review_status     stage_bill.review_status%TYPE;
v_schema_name        varchar(50);
v_Load_date          date;
v_Load_user            varchar(50);
v_Row_Effective_Date   date;
v_Row_End_Date         date;
Begin
if p_data_load_date is null then
    select (sysdate - 7), (sysdate - 1) into v_start_date, v_end_date from dual;
elsif p_data_load_date is not null then
   select (p_data_load_date - 7), (p_data_load_date - 1) into v_start_date, v_end_date from dual;
else
    raise_application_error('-20042', 'Data control - GetDataControlAuditData : Date parameter must be a date of this or a previous week.');
end if;
-- cursor c_get_data loop begin
OPEN c_get_data;
    LOOP                                                       -- cursor c_get_data loop begin
      FETCH c_get_data
       INTO
        v_batch_id,
v_beginning_service_date,
v_bill_id ,
v_bill_method ,
v_bill_number,
v_bill_received_date,
v_bill_status,
v_bill_type,
v_change_oltp_by,
v_change_oltp_date,
v_client_datafeed_code,
v_client_id,
v_created_date,
v_date_of_incident,
v_date_paid,
v_deleted_oltp_by,
v_deleted_oltp_date,
v_duplicate_bill,
v_ending_service_date ,
v_event_case_id ,
v_event_id,
v_from_oltp_by,
v_oltp_bill_status,
v_review_status,
v_schema_name,
   v_Load_date,
   v_Load_user,
   V_Row_Effective_Date,
   v_Row_End_Date;
    EXIT WHEN c_get_data%NOTFOUND;
insert into STG_FADM_HRI_STAGE_BILL_TEST
batch_id
,beginning_service_date
,bill_id
,bill_method
,bill_number
,bill_received_date
,bill_status
,bill_type
,change_oltp_by
,change_oltp_date
,client_datafeed_code
,client_id
,created_date
,date_of_incident
,date_paid
,deleted_oltp_by
,deleted_oltp_date
,duplicate_bill
,ending_service_date
,event_case_id
,event_id
,from_oltp_by
,oltp_bill_status
,review_status
,schema_name
,Load_date
,Load_user
,Row_Effective_Date
,Row_End_Date
values(
       v_batch_id,
v_beginning_service_date,
v_bill_id ,
v_bill_method ,
v_bill_number,
v_bill_received_date,
v_bill_status,
v_bill_type,
v_change_oltp_by,
v_change_oltp_date,
v_client_datafeed_code,
v_client_id,
v_created_date,
v_date_of_incident,
v_date_paid,
v_deleted_oltp_by,
v_deleted_oltp_date,
v_duplicate_bill,
v_ending_service_date ,
v_event_case_id ,
v_event_id,
v_from_oltp_by,
v_oltp_bill_status,
v_review_status,
v_schema_name,
v_Load_date,
v_Load_user,
v_Row_Effective_Date,
v_Row_End_Date ) ;
COMMIT;
    END LOOP;
    CLOSE c_get_data;

Maybe you need something else, like
CREATE OR REPLACE PROCEDURE load_fadm_staging_area_test (
p_data_load_date DATE
) IS
v_start_date   DATE;
v_end_date     DATE;
BEGIN
SELECT NVL (p_data_load_date, SYSDATE) - 7,
         NVL (p_data_load_date, SYSDATE) - 1
INTO   v_start_date,
         v_end_date
FROM   DUAL;
MERGE INTO stg_fadm_hri_stage_bill_test b
USING      (SELECT *
              FROM   stage_bill
              WHERE created_date BETWEEN v_start_date AND v_end_date) a
ON         (b.bill_id = a.billl_id)
WHEN NOT MATCHED THEN
    INSERT     (batch_id,
                beginning_service_date,
                bill_id,
                bill_method,
                bill_number,
                bill_received_date,
                bill_status,
                bill_type,
                change_oltp_by,
                change_oltp_date,
                client_datafeed_code,
                client_id,
                created_date,
                date_of_incident,
                date_paid,
                deleted_oltp_by,
                deleted_oltp_date,
                duplicate_bill,
                ending_service_date,
                event_case_id,
                event_id,
                from_oltp_by,
                oltp_bill_status,
                review_status,
                schema_name,
                load_date,
                load_user,
                row_effective_date,
                row_end_date
    VALUES     (a.batch_id,
                a.beginning_service_date,
                a.bill_id,
                a.bill_method,
                a.bill_number,
                a.bill_received_date,
                a.bill_status,
                a.bill_type,
                a.change_oltp_by,
                a.change_oltp_date,
                a.client_datafeed_code,
                a.client_id,
                a.created_date,
                a.date_of_incident,
                a.date_paid,
                a.deleted_oltp_by,
                a.deleted_oltp_date,
                a.duplicate_bill,
                a.ending_service_date,
                a.event_case_id,
                a.event_id,
                a.from_oltp_by,
                a.oltp_bill_status,
                a.review_status,
                'HRI',
                SYSDATE,
                'ETLPROCESS001',
                v_start_date,
                NULL
END load_fadm_staging_area_test;Whenever you code a cursor and a loop, ask yourself. Do I need that?
Regards
Peter

How to get all data from nokia to i5s

how to get all data from nokia E71 to i5s???

if you can put those data in your computer then add it in iTunes. your iPhone 5s should get it thru syncing.

How get selected data from oracle data as per give input

sir i use Sun Java Studio Creator with oracle 10g
my direct want user give input through both listbox , textbox or string variable
how i pass this input in sessionbeen query and page give data in table as per user need
please give me step and code
this is urgent
thank's

You would get hierarchical data from a functrion in the same way as you would any data. Create a function returning a cursor and then use your SQL statement to open the cursor. Very simplistically:
Create Function My_Func Return Sys_Refcursor As
   l_cur Sys_Refcursos
Begin
   Open l_cur For
      'select EMPNO,ENAME,SYS_CONNECT_BY_PATH(ename, '/') "Path"
       from EMP
       start with MGR is null
       connect by prior empno=mgr';
   Return l_cur;
End;
Then, whatever calls the function would walk through the cursor an do whatever.
Jhn

Extractor to get Classification data from R3 (specifically AUSP table)

Similar Messages

Maybe you are looking for