EXTREME NEED OF WHY WHEN RUNNING JOBS IN ADK FOR WIN7 OR 8 SAYS OPERATING SYSTEM NOT SUPPORTED ON ALL
GUYS,GALS,FELLOW GEEKS, NERDS, PROFESSIONALS, AND the like. I have a major issue of why after installing ADK it says when after running that the operating system isnt supported? I see no rational of why it would do that. ANYONE who is privvy to such, please
asap me a solution if there is one. Uninstalling it now. I just need a tool other than the fixit tools which are too archaec to deal with, or too light in diagnostics.
leonard
Are you running the required OS according to the document below?
http://msdn.microsoft.com/en-us/library/windows/hardware/dn246959.aspx
Juke Chou
TechNet Community Support
Similar Messages
-
Hi Someone Know why my charger is not working properly but always it was been working good but now when conect my iphone (3gs) appears a golden triangle saying :Charging is not Supported with this accessory. Please I Need Some Help Here. Thanks =D
sounds like the cable or the iphone connector are somehow damaged
-
I recently bought a lightning to 30 pin adapter for my new iPad so that I could continue to use my 30 pin to VGA cord, but when I plug the VGA cord into it it says it is not supported. They are all apple products, so why doesn't it work?
If it is a lightning to 30 pin adaptor, and you have a 7th Generation Nano it has to fit the Nano.
This is lightning to 30 pin adapter: http://www.bestbuy.com/site/Apple%26%23174%3B---Lightning-to-30-Pin-Adapter/6651 936.p?id=1218803450821&skuId=6651936#tab=overview
Is this what you bought?
You need to contact Sony and see if they model you have is compatible with the docking adapter. It may not be. -
Background Job Finishing with Database system not supporting
Hi All,
When i am running the RSCOLL00 program its executes all the programs and finally it says DataBase system not supporting.
And i am not getting any dumps.
Due to this in ST03N i could nt able to find the data for the present day and also last minutes load.
Please guide me.
Thanks,
MaheshHi Kaushik,
here is the log
Job started
Step 001 started (program RSCOLL00, variant , user ID HOUSEKEEPING)
Clean_Plan:Cleanup of DB13 Plannings
Clean_Plan:started by RSDBPREV on server tcs050983
Clean_Plan:Cleaning up jobs of system PI7
Clean_Plan:finished
Database system not supported
Job finished
Thanks,
Mahesh -
When i try to make a iMovie project it will say operation could not be completed and no other info
when i try to make a iMovie it will say operation could not be completed and no other info is available
I saw someone else had this issue back in July, and the solution was to create a new event and then a new movie within that event. I tried this and it did not work for me.
-
I'm trying to reinstall Mavericks on used Macbook Pro. When I log in to my Apple ID, it says it was not the same ID used to purchase Mountain Lion. I need to change user/admin as a lot of the folders and apps are in Chinese!
The first thing you should do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model. Look it up on this page to see what version was originally installed.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. I suggest you install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. If you don't have the media, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Once booted from the disc or in Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, buy it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able toauthorize it under your ID. In that case, contact iTunes Support. -
Getting the below error when running the Baseline.grf for the first time
I am getting the below error when running the Baseline.grf for the first time.
Appreciate your support in resolving it.
Error below:
INFO [main] - *** CloverETL framework/transformation graph, (c) 2002-2012 Javlin a.s, released under GNU Lesser General Public License ***
INFO [main] - Running with CloverETL library version 3.2.1 build#63 compiled 04/01/2012 12:53:21
INFO [main] - Running on 4 CPU(s), OS Windows 7, architecture amd64, Java version 1.6.0_20, max available memory for JVM 901120 KB
INFO [main] - Loading default properties from: defaultProperties
INFO [main] - Graph definition file: graph/Baseline.grf
INFO [main] - Graph revision: 1.114 Modified by: mkressirer Modified: Thu Apr 12 13:27:18 EDT 2012
INFO [main] - Checking graph configuration...
INFO [main] - Graph configuration is valid.
INFO [main] - Graph initialization (Baseline)
INFO [main] - [Clover] Initializing phase: 0
INFO [main] - [Clover] phase: 0 initialized successfully.
INFO [main] - register MBean with name:org.jetel.graph.runtime:type=CLOVERJMX_1306871483270_0
INFO [WatchDog] - Starting up all nodes in phase [0]
INFO [WatchDog] - Successfully started all nodes in phase!
INFO [RUN_GRAPH1_0] - Running graph ./graph/InitDataStore.grf in the same instance.
INFO [RUN_GRAPH1_0] - Checking graph configuration...
INFO [RUN_GRAPH1_0] - Graph configuration is valid.
INFO [RUN_GRAPH1_0] - Graph initialization (InitDataStore)
INFO [RUN_GRAPH1_0] - [Clover] Initializing phase: 0
WARN [RUN_GRAPH1_0] - WS messenger cleanup failed.
java.lang.NullPointerException
at org.apache.axis2.client.Stub.cleanup(Stub.java:134)
at com.opensys.cloveretl.component.WebServiceClient.free(Unknown Source)
at org.jetel.graph.Phase.free(Phase.java:487)
at org.jetel.graph.TransformationGraph.freeResources(TransformationGraph.java:681)
at org.jetel.graph.TransformationGraph.free(TransformationGraph.java:955)
at org.jetel.graph.runtime.PrimitiveAuthorityProxy.executeGraph(PrimitiveAuthorityProxy.java:149)
at org.jetel.component.RunGraph.runGraphThisInstance(RunGraph.java:511)
at org.jetel.component.RunGraph.runSingleGraph(RunGraph.java:409)
at org.jetel.component.RunGraph.execute(RunGraph.java:302)
at org.jetel.graph.Node.run(Node.java:414)
at java.lang.Thread.run(Thread.java:619)
WARN [RUN_GRAPH1_0] - Some graphs wasn't executed (because graph "./graph/InitDataStore.grf" finished with error).
WARN [RUN_GRAPH1_0] - Some graph(s) finished with error.
ERROR [WatchDog] - Graph execution finished with error
ERROR [WatchDog] - Node RUN_GRAPH1 finished with status: ERROR caused by: Graph './graph/InitDataStore.grf' failed!
ERROR [WatchDog] - Node RUN_GRAPH1 error details:
org.jetel.exception.JetelException: Graph './graph/InitDataStore.grf' failed!
at org.jetel.component.RunGraph.execute(RunGraph.java:324)
at org.jetel.graph.Node.run(Node.java:414)
at java.lang.Thread.run(Thread.java:619)
INFO [WatchDog] - [Clover] Post-execute phase finalization: 0
INFO [WatchDog] - [Clover] phase: 0 post-execute finalization successfully.
INFO [WatchDog] - Execution of phase [0] finished with error - elapsed time(sec): 2
ERROR [WatchDog] - !!! Phase finished with error - stopping graph run !!!
INFO [WatchDog] - -----------------------** Summary of Phases execution **---------------------
INFO [WatchDog] - Phase# Finished Status RunTime(sec) MemoryAllocation(KB)
INFO [WatchDog] - 0 ERROR 2 20132
INFO [WatchDog] - ------------------------------** End of Summary **---------------------------
WARN [exNode_0_1306871483270_RUN_GRAPH1] - Attempt to unregister non-registered thread in the ContextProvider.
./graph/InitDataStore.grf: Execution of graph failed! Error during graph initialization: Phase 0 can't be initilized.
INFO [WatchDog] - WatchDog thread finished - total execution time: 2 (sec)
INFO [main] - Freeing graph resources.
ERROR [main] - Execution of graph failed !It can't find an Endeca specific class when running via the clover command line utility. Thus, the classpath being set in that shell script is not incorporating the .jar files where the endeca-specific classes are packaged. I would start by adding an line to see what your classpath is set to. There are actually already some lines of shell script in clover that you can uncomment to see what .jars are getting loaded:
#echo $CLOVER_LIB/*
for i in $CLOVER_LIB/*.jar $CLOVER_LIB/*.zip; do
LOCAL_CLASSPATH="$LOCAL_CLASSPATH:$i"
done;
#for i in `ls $CLOVER_LIB/*.jar`; do
#echo $i
#done;
You could also echo LOCAL_CLASSPATH to see what is getting set there. At the end of the day, you will need the endeca-specific jars to load which can be found here: /Endeca/Discovery/2.3.0/Integrator/plugins/com.endeca.latitude_1.0.0/*
HTH,
Dan
http://branchbird.com -
How to get Basic salary amount in the Housing formula to calculate the housing value as I used the DBI (NICDP_EMPLOYEE_BASIC_SALARY_AMOUNT_ASG_ENTRY_VALUE) but when run the Quick pay for the housing element alone result come 0, How to get Basic salary amount in the Housing formula to calculate the housing value as I used the DBI (NICDP_EMPLOYEE_BASIC_SALARY_AMOUNT_ASG_ENTRY_VALUE) but when run the Quick pay for the housing element alone result come 0
Hi,
Is your formula attached to basic salary element or some other element? You need to make sure that basic salary element has some value and is processed before this formula is called. Are you able to see value for basic salary element after payroll run?
Regards,
Pawan -
Why does phone say "this device not supported" when charging
why does phone say "this device not supported" when charging?
If it is clean connect a 2nd accessory of the same kind to see if you need to replace the accessory or continue troubleshooting the phone.
-
I used to shoot video in my Powershot S3 IS (Format MVI_.AVI) and load them into iPhoto, I used quicktime pro so I could convert for emailing to family members. That was when I was running Leopard now with Mt. Lion nothing works. Videos do not open at all. Any simple suggestions, I am not real keen on iMovie Productions and not real certain how they compress for emailing attachments. Something simple here that I am missing? Thanks so much. I am a grandpa trying to share with family members far away (quickly & simply).
I am surprised that Apple did not build a converter into Mt. Lion.
Apple does have a converter built into Mountain Lion. It is call "Quicktime." However, in order to use this converter, you must first make sure the compression formats are playback compatible with QT. Basically, there are three levels of QT compatibility. The lowest is "Playback." These file can be played by QT but may not be conversion or edit compatible with QT. The second level is QT "Conversion" compatible. These files are playback compatible and can be converted to other compression formats using QT. "Edit" compatible media files are "Fully" compatible with QT since the can be played, converted and/or edited by QT. The main problem here is that AVI is a "legacy" file format that has not been officially supported by Microsoft for more than 11 years when it was replaced by Windows Media multimedia file/compression formats. Many of the original compression formats used in AVI files have never been transcoded for the Mac platform, use beyond system 9, or use beyond PPC platforms. In addition, some commonly used AVI codecs are proprietary or use non-standard (hybrid) profile and level combinations. In short, there is little wonder that Apple has been distancing itself from this outdated file type as it re-writes and upgrades its own QT structure to support more standardized, more scalable, more modern high definition file types and compression formats. It is really unfortunate that users continue to use this outmoded file type simply because it is freely available, easy to use, or they are simply too lazy to move on to a more modern or more efficient file types and/or compression formats.
I tested Wondershare Video Converter Ultimate for the Mac, which seems to be the "state of the art". I may be purchasing a new camera which might create a whole new set of variables. This program seems to cover all bases and is great for novices.
There are many third-party apps available if you wish to search for them. Many are even available in the App Store. Most do their job well and it is usually a matter of personal user preference as to which is best.
HandBrake seems more suited to folks with more experience and knowledge.
I mentioned Handbrake primarily because it is free and easy to use when you employ the included conversion presets options. (The TV options can normally be used for almost any situation depending on the source file and output requirements.) It is also excellent for more experienced users, but has a somewhat limited choice of output options as it does not access the user's system QT codec component configuration. -
Why when im streaming my songs for my library on my apple tv does it censor the songs and how do i turn it off?
I use iTunes Match, and I notice that when I play "matched" versions of 2Pac's "I Ain't Mad at Cha", all of the curse words are skipped over. Just to make sure it wasn't my copy of the track, I played it off of my permanent library, and the song plays properly. So I believe that Apple has seen fit to censor the song. I haven't read about this anywhere, but I'm pretty upset about it. I own the track -- I have a copy of 2Pac's Greatest Hits, which I ripped. If I turn off iTunes Match and transfer the song to my mobile devices with a USB cable, I could play it the way I want to hear it. I think iTunes Match is a fantastic concept, but I don't need Apple deciding what kinds of music I should or shouldn't be listening to.
Incidentally, I haven't noticed other tracks with curse words censored. It may be that I loaded them onto my mobile device before Apple began censoring. -
Why when using Adobe Bridge, I apply a star rating, the rating does not show up in Photoshop Elements. I use Elements as my organizer and Bridge to view as it is much more user friendly. Anyone any solutions??
Most likely you have set the wrong file as the external editor. You don't want the obvious one; that's just a link to the welcome screen. Go back and choose this one, which is hidden away inside the folder Support Files:
-
when I connect my iphone to my mac it says itunes will not work with my iphone cause it needs version 10.6.3 itunes,. problem is i have no idea how to down load that to my iphone when my mac will not connet to it cause it nees the down load help please
Ive got the same problem, just got my iphone unlocked, and they told me to sync it to itunes to get it permently unlocked, well everytime i plug my iphone in it says; it wont work as it needs up dating to 10.6.3, which i have already updated, but still doesnt work, so how can i get my phone unlocked?
-
secondly, i used migration assistant to move everything from old laptop to new. when i used pages on new machine, 10.8.5 operating system, there is no click for file save as in the menu, only flle save. why?
Hold down Option key while clicking on menu bar and Save as will appear.
-
Turned on computer email said I needed new account when I have been using for years (no mail, drafts, sent). I filled oyt new mail setup and it only found my mail not drafts and sent ... I use drafts to store documents and sent in a leser capacity - Ihave huge data in drafts. Tried to restore using time machine (never had to before). The backups are there but the restore button does not highlight??? So when you clickit nothing happens.
Restoring Mail is complex. Luckily, the late James Pond left us an illustrated guide:
You can restore the Mail messages and indexes to the way they were (provided you have a Backup from around that time)
Pondini's Time Machine FAQs: 15m. Viewing or Restoring Apple Mail
Maybe you are looking for
-
How do I share windows and iOS on my MAC book pro
how do i share windows and iOS on the same hard disk on my MAC? will each of the operating system see the whole disk?
-
Windows 7 Ultimate Build 7600 This copy of Windows is not genuine
Hello, I have a Lenovo desktop that I installed Windows 7 Ultimate on last fall. I obtained my legal copy of Windows 7 from Tiger Direct as a promotion that was giving away copies of Windows 7. I still have the envelope and installation cd, the insta
-
Problem with process not being executed depending on sequence
Got a weird problem which is causing us much frustration. We have a page with 6 processes on. It appears that several of the processes are not being run by Apex, we've verified this by looking at the debug readout. We created a new, unconditional tes
-
'Text Enhance' - unwanted links on websites
Hello, So, only just recently, a lot of webpages I open up in Safari have words that link to website offering these dodgy offers - like iPhone's really cheap and stuff. I'm concerned that this might be an indication that I have contracted a virus/mal
-
How to output surround 5.1 audio to Compressor?
I have 6 mono .wav files which I've set levels, fades, etc. in FCP, along with my picture of course. But when I send the sequence to Compressor, it asks to Add Surround Sound, and then seems to be looking for various files to be dragged in. Should I