Background Job Finishing with Database system not supporting
Hi All,
When i am running the RSCOLL00 program its executes all the programs and finally it says DataBase system not supporting.
And i am not getting any dumps.
Due to this in ST03N i could nt able to find the data for the present day and also last minutes load.
Please guide me.
Thanks,
Mahesh
Hi Kaushik,
here is the log
Job started
Step 001 started (program RSCOLL00, variant , user ID HOUSEKEEPING)
Clean_Plan:Cleanup of DB13 Plannings
Clean_Plan:started by RSDBPREV on server tcs050983
Clean_Plan:Cleaning up jobs of system PI7
Clean_Plan:finished
Database system not supported
Job finished
Thanks,
Mahesh
Similar Messages
-
Background job finished but flat file not created in the Background
Dear all,
ZHR_CSD program is scheduled to run daily at 00:01:00. This program is generating the flat file in the folder CSD/HR.
when i schedule this program to run immediately it is generating the flat file.
But when i schedule this program in Background it is not generating flat file .
RegardsHi,
As suggested by Eric, your Z Program is probably using GUI_DOWNLOAD Function Module.
GUI_DOWNLOAD or any other GUI function modules (FM) will only run in foreground, not in Background.
Ask your developer to code that Z Program with OPEN DATASET logic, if its possible.
The Reverse situation is well described in [this thread|Background Job assigment with variant in SM37 , for Textfile uploading], please refer it to get some relative information for the same.
Regards,
Bhavik G. Shroff -
Transfer method 'TRFC with PSA' is not supported by the source system.
Hi guys
We are getting the following error when we try to open the transfer rules:
Transfer method 'TRFC with PSA' is not supported by the source system.
And when we run the load we are getting this error message:
An RFC call-up triggered the exception
Our source system check is ok. RFC test is ok from both sides.
Please advice what else can be the solution.
Edited by: sam on Nov 6, 2008 4:51 PMDid you do Right click on Source system and 'Check' option in RSA1-> Source Systems?
Is this problem after upgrade or something like that?
-Abhijit -
Afer background job finished, spool was not generated
hi all
Afer background job finished, spool was not generated but all background jobs is not
soem background jobs was created spool.
even if same user and same backgorund job, sometime generated spool or not.
how can I solve??
thanksHi,
Spool will be generated only spool specification wil be defined for that job.
Select the job go to steps spool specification you can see the device assigned to it.
Regards
Ashok -
Questions regardin "Oracle Database does not support Hyper-V and "
Platform 287 Microsoft Windows Server 2008 (64-bit Itanium)
1 - Can you give me some details about what is not supported of the Hyper-V environment?
2 - There are know issue running Oracle in a Hyper-V child partition/virtualized partition ?
2 - There are know issue about curruption of datafile using snapshoting,
Thanks in advance.Hello.
Can anybody explain, how should I understand this "Certification Information" from Oracle metalink?
==Quote ==
"Oracle Database is certified with the following Windows Server 2008 editions:
* Windows Server 2008 Standard (x86 and x64)
Oracle Database does not support Hyper-V and Server Core in Windows Server 2008.
==/Quote==
Does it mean that this OS is supported, but only if it does not run in Hyper-v configuration?
Thanks for your advice.
Jakub -
PSE 6.0 on Mac: File system not supported
Downloaded PSE 6.0 as root on 10.5.6, PPC G5 w/ Mac OS Extended (Case-sensitive Journaled) FS. When I began install, got "file system not supported." Any ideas? Thanks.
Ah, yes, then you're one of the few people who come here who've done that who have a reason. The average person who has trouble resulting from this just randomly chose that option when formatting (lots of people think they won't be able to use capital letters in file names if they don't). Unfortunately, just for future reference, I believe this is a problem with all adobe products. I know it's the same with Photoshop.
-
In-place upgrade of Enterprise Manager for RAC databases is not supported
upgrading 2 node RAC from 10.2.0.1 to 10.2.0.3 on Windows 2003 64 bit. I got the following:
In-place upgrade of Enterprise Manager for RAC databases is not supported in this release
Now I cannot log in to the database control as sys with sysdba role . I get "invalid username/password" error
I can login as a dba user
I also get a java error after I log in, some thing about class not found, but then I'm in and I can do everything that I try, although I haven't tried scheduling a backup yet
Can I upgrade EM to 10.2.0.3?
If so, how?On the patchset readme...
11.3 Upgrade of Oracle Enterprise Manager Not Supported
When you start Oracle Database Upgrade Assistant to upgrade 10.2.0.1 database to 10.2.0.3 patch set, the following error occurs:
Inplace upgrade of Enterprise Manager is not supported for RAC databases is not supported in this release
Workaround:
Ignore warning.
If you drop and recreate the EM repository?
1). emca -deconfig dbcontrol db repos drop
2). emca -config dbcontrol db -repos create
Be careful, doing this put the database on QUIESCE mode.
Regards,
Rodrigo Mufalani -
ORA-02070 database does not support semi join in this context
The following merge sql on Oracle 11g throws "ORA-02070 database does not support semi join in this context".
MERGE INTO ORDERS tgt
USING
SELECT C.short_name, C.customer_id
FROM customers C
WHERE customer_id IN ( SELECT distinct customer id FROM orders O WHERE O.order_date > SYSDATE - 3 )
)src
ON ( tgt.customer_id=src.customer_id )
WHEN MATCHED THEN
UPDATE SET tgt.short_name=src.short_name;
Any ideas? This piece of code was working on an earlier version of Oracle 11g.
Thanks,
AnuHi, Anu,
You can try this:
MERGE INTO ORDERS tgt
USING
SELECT C.short_name, C.customer_id
FROM customers C
) src
ON ( tgt.customer_id = src.customer_id
AND tgt.order_date > SYSDATE - 3
WHEN MATCHED THEN
UPDATE SET tgt.short_name = src.short_name; It's surprising that the error message mentioned a semi-join, because you weren't doing a semi-join. An example of a semi-join is:
MERGE INTO ORDERS tgt
USING
SELECT DISTINCT
C.short_name, C.customer_id
FROM customers C
JOIN orders o ON c.customer_id = o.customer_id
WHERE o.order_date > SYSDATE - 3
) src
ON (tgt.customer_id = src.customer_id)
WHEN MATCHED THEN
UPDATE SET tgt.short_name = src.short_name; but perhaps the optimizer re-wrote your IN sub-query as a semi-join.
An EXISTS sub-query is another way to get the results you want, unless it causes ORA-02070, also. Natrually, I can't test anythihng, since you didn't post any sample data.
Edited by: Frank Kulash on Apr 5, 2011 11:34 AM -
Background Job Terminating with Signal 4 received by operating system
Hi ,
There is a zee ABAP program which is working fine in foreground but the same was not working at BACKGROUND when I shedule the job with the same zee ABAP program. the job is terminating with "Job also cancelled due to process termination. See the system log" But the same was worked previous at background too, there are no changes to the program too.The problem was with only this zee ABAP program for remaining are all working fine.
St22:
An SAP System process was terminated by an operating system signal.
Possible reasons for this are:
1. Internal SAP System error.
2. Process was terminated externally (by the system administrator).
Last error logged in SAP kernel
Information on where termination occurred
The termination occurred in the ABAP/4 program "ZSDUZ980" in
"ADD_NO_ACTIVITY_RECORDS".
The main program was "ZSDUZ980".
The termination occurred in line 1174
of the source code of program "ZSDUZ980" (when calling the editor 11740).
The program "ZSDUZ980" was started as a background job.
Component............ "Taskhandler"
Place................ "SAP-Server witco-10_NCQ_00 on host witco-10 (wp 1)"
Version.............. 1
Error code........... 11
Error text........... "ThSigHandler: signal"
Description.......... " "
System call.......... " "
Module............... "thxxhead.c"
Line................. 7209
The error reported by the operating system is:
Error number..... " "
Error text....... " "
System Environment
SAP Release.............. "31I"
Operating system......... "AIX"
Database type............ "ORACLE"
SAP kernel............... "31I"
SAP database version..... "31I"
Thanks
SambiHi Mark,
Thanks for the reply,
Below are the memory details in our system, according to the Notes you send to me, They have set it as it is.
abap/heap_area_dia 188743680
abap/heap_area_nondia 400556032
abap/heap_area_total 838860800
abap/heaplimit 25165824
The same Zprogram was worked before in the BAckground, But from last week it stop working. But there are no chages happen to this zee ABAP program.
Thanks
Sambi -
Background Job cancelling with error Data does not match the job definition
Dear Team,
Background Job is getting cancelled when I run a Job on periodically but the same Job is executing perfectly when I run it manually(repeat scheduling) .
Let me describe the problem clearly.
We have a program which picks up files from an FTP server and posts the documents into SAP. We are scheduling this program as a background Job daily. This Job is running perfectly if the files contain no data. But if the file contains data the JOb is getting cancelled with the following messages.
And also the same Job is getting executed perfectly when repeat scheduling is done ( even for files with data).
Time Message text Message class Message no. Message type
03:46:08 Job PREPAID_OCT_APPS2_11: Data does not match the job definition; job terminated BD 078 E
03:46:08 Job cancelled after system exception ERROR_MESSAGE 00 564 A
Please help me in resolving this issue.
Thanks in advance,
Sai.hi,
If you have any GUI function modules used in the program of job
you cannot run it in background mode. -
GUYS,GALS,FELLOW GEEKS, NERDS, PROFESSIONALS, AND the like. I have a major issue of why after installing ADK it says when after running that the operating system isnt supported? I see no rational of why it would do that. ANYONE who is privvy to such, please
asap me a solution if there is one. Uninstalling it now. I just need a tool other than the fixit tools which are too archaec to deal with, or too light in diagnostics.
leonardAre you running the required OS according to the document below?
http://msdn.microsoft.com/en-us/library/windows/hardware/dn246959.aspx
Juke Chou
TechNet Community Support -
Background job failing with license check error
Hi Experts
In our ERP 6.0 system ,all the background jobs are failing with license check error.
Have checked the license in SLICENSE and the license is fine.
There is no warning while users are loggign in ,but when any background job is runing its failing with error
Job started
Logon not possible (error in license check)
Job cancelled after system exception ERROR_MESSAGE
Also performed the license test which is failing
F:\usr\sap\XX1\SYS\exe\uc\NTAMD64>saplicense -test pf=F:\usr\sap\XX1\SYS\profile
\XX1_DVEBMGS00_host_xx
Protocol saplicense test:
Read sapsytem name
ok, sapsytem name = XX1
Read message server host
ok, host = hostname
Read message server service port
ok, service port = sapmsXX1
Connect to message server
ok, connect done
Read hardware key from message server
ok, got hardware key
Detach from message server
ok, detached
Check hardware key
ok, hardware key = T0343073854
Connect to database
ok, connected
Check license
ok, check done
Disconnect database
ok, database disconnected
test result: license test failed
LICENSE system: XX1 hardware key: T0343073854 expiration_date:
installation no: key:
userlimit: 0 productid: R3_BASIS
system-nr:
license expired ***
Please suggest how to troubleshoot.
Regards
Ajay@Michael
In SLICENSe the Hardware key field is not BLUE or BLACK and its showing the exact hardware key which i can see at OS level with saplicense -get command.
@Jagadish
Note is good refrence, i reiinstalled the Digitally signed license with saplikey command and it was successful.
But still the license test is failing at OS Level..below is the command prompt output.
===================================================================
F:\usr\sap\XX1\SYS\exe\uc\NTAMD64>saplikey -install C:\license_script_XX.txt pf
=F:\usr\sap\XX\SYS\profile\XX_DVEBMGS00_mngsez148079
SAP License Key Administration - Copyright (C) 2003 SAP AG
2 SAP license key(s) successfully installed.
F:\usr\sap\XX\SYS\exe\uc\NTAMD64>saplicense -test pf=F:\usr\sap\XX1\SYS\profile
\MD1_DVEBMGS00_mngsez148079
Protocol saplicense test:
Read sapsytem name
ok, sapsytem name = XX1
Read message server host
ok, host = host
Read message server service port
ok, service port = sapmsXX1
Connect to message server
ok, connect done
Read hardware key from message server
ok, got hardware key
Detach from message server
ok, detached
Check hardware key
ok, hardware key = T0343073854
Connect to database
ok, connected
Check license
ok, check done
Disconnect database
ok, database disconnected
test result: license test failed
LICENSE system: XX1 hardware key: T0343073854 expiration_date:
installation no: key:
userlimit: 0 productid: R3_BASIS
system-nr:
license expired ***
============================================================
@Juan
The hardware key was changed and we requested a new license with new hardware key,system was runing fine for couple of weeks with all background jiobs for SPAM./SAINT Ok .We performed EHP4 on this system.
But now this issue is here,so i guess we should troubleshoot.
Please let me know any other pointers.
Regards
Ajay
PS In SLICENSE new installed license is fine and all users can login. -
How to find table with colum that not support by data pump network_link
Hi Experts,
We try to import a database to new DB by data pump network_link.
as oracle statement, Tables with columns that are object types are not supported in a network export. An ORA-22804 error will be generated and the export will move on to the next table. To work around this restriction, you can manually create the dependent object types within the database from which the export is being run.
My question, how to find these tables with colum that that are object types are not supported in a network export.
We have LOB object and oracle spital SDO_GEOMETRY object type. our database size is about 300G. nornally exp will takes 30 hours.
We try to use data pump with network_link to speed export process.
How do we fix oracle spital users type SDO_GEOMETRY issue during data pump?
our system is 32 bit window 2003 and 10GR2 database.
Thanks
Jim
Edited by: user589812 on Nov 3, 2009 12:59 PMHi,
I remember there being issues with sdo_geometry and DataPump. You may want to contact oracle support with this issue.
Dean -
Background Job Scheduling with variants in IS - Public sector
Hi,
We run auto write off using scheduled job activity (SM37 -Program : RFKK_MA_SCHEDULER). There is an variant containing Main Transactions that needs to be included / excluded for write off.
The variant values are changed / updated with additional main transactions and when we run the batch jobs the new variant values are not getting picked or used. If we run the program independently i.e FP04M and use the variant, the new variant values are being handled.
I am not sure what is missing in the SM37 background job that is defined though the variant values are runtime parameters and should have automatically be used after it undergoes modification in the next job exeuction.
Kindly provide your feedback.
Thanks & Regards
Bala
P.S. : I Have posted this query in IS forum too.Hi,
You should understand that background job will be executed in application server and there will be no gui or access to presentation server available.
You should upload your file to application server through tcode CG3Z.
See F1 help for OPEN DATASET / Search SCN for sample codes for OPEN DATASET.
You should change the code so that it can be run in both modes using the system variable SY-BATCH.
If it is space use GUI_UPLOAD, if it is X use OPEN DATASET.
Regards
Karthik D -
Scheduled TMS_ # TMS_TP_IMPORT background jobs fail with error code 0232
Is anyone else having the problem we've just encountered since upgrading to ECC 6.0 and CRM 2007, where once setting up the automatic import ALL background jobs, to have all of the Transport Change Requests imported into the Q-Prod testing systems automatically, fail after several successful runs?
After setting up the automatic import background job to run every 15 minutes, the first few run successfully (importing any transports as it should), then the transports stop being imported.
The background jobs continue to run, but have the following in the job log overviews CRM 2007 - "Could not start transport control program tp". R\3 ECC 6.0 - "Transport control program tp ended with error code 0232".
Only by deleting the background job and recreating it (or manually importing) from STMS, can the transports continue to be imported. Although I have noticed that there are multiple tp.exe processes started, which need to be deleted before the STMS and TMS Background jobs work again.
The:
DB is SQL Server 2005
disp+work is at version 7000.150.14.48855
R3Trans is at version 7000.149.14.47907
tp is at version 7000.144.14.39594
Any suggestions on how to cure this for good?Thanks All
FYI
SAP first suggested the following notes: 19466, 1150361, and to add a Startup profile parameter rfc/use_gwstart = 1. Which was only partially successful.
I guess it had more to do with RFC processes hanging than it did with the tp, which was fixed in a later kernel patch level.
I've upgraded the kernel to the latest (70000.181.0.0) and my problem was fixed.
Ken
Maybe you are looking for
-
How to import video files from external hard drive?
I receive an error "You're trying to import a file from a DVD or Removable Media. Please use Video Importer for importing Videos..." however when I try this I still cannot import video files. This is extremely frustrating as we have 32 copies of thi
-
Service Module - Contract Template
Hello Experts, </p> We plan to implement service module in our SBO8.8 (pl6). I've been reading subjects about it for several weeks and do some testing. We've been using SBO almost about 1.5 years and trying to utilize its capabilities from time to ti
-
Hi, I am new to Dial Up technology, I am planning to setup management infrastructure for my L3VPN CPEs, to achieve this I am considering a 2800 with PVDM2-12DM module. Does anyone here knows if this supports both PRI as well as ISDN lines. In additio
-
WLC 5508 - WebAuth Bundle tar error 256
Hi all, I have a new fresh 5508 release 7.0.98.0 When I try to download (I mean upload to the controller) a customized Webauth bundle in .tar format I have the following message error in the syslog : *TransferTask: Oct 29 12:56:08.894: %UPDATE-3-UNTA
-
Keeping iTunes synced to multiple PCs
I have a have a Windows laptop and iPhone and purchase content from iTunes on both. Syncing with the two devices is straighforward. I've just added a desktop component, as well as and AppleTV to my network. Any suggestions on how I can keep iTunes on