F.38 no records shown

Hello everyone,
I'm trying to run F.38 for tax deferral and it wouldn't pick up any record. I have tax code V1 configured with target tax code W1 and they both have different g/l account.
I gave the tax g/l account for V1 in the F.38 g/l account and try to run it, it wouldn't pick up any. I have cleared the invoice items.
Help greatly appreciated. Any lead would really help me.
Thanks so much,
Tony.

Hi,
This thread has been created some time ago and recieved no response. Can you please close if you feel this issue/query has been resolved in the meantime. If it has not then please provide additional information in relation to your query. By providing updates to your thread it moves you thread to the first page of thread and increases visibility and possiblity for the multiptude of experts in SDN Forums to offer their support.
Therefore please update with more information or close thread.
Thank you for your assistance.
Regards,
Brendan.
(ERP FI/CO SDN/WIKI Moderator)
http://wiki.sdn.sap.com/wiki/display/ERPFI/ERP+Financials

Similar Messages

FTWR File Size Worksheet no records shown?!

This is regarding DART (Data Retention Tool).
In FTW1A I extracted data. In AL11 I can see the data extraction file created in FTW1A. In FTWR “File Size Worksheet” no records are shown for the company code for which I extracted data in FTW1A. Does anybody have a clue what went wrong? How to get records shown in FTWR?

The size indication you are looking at is probably for megapixels. You can see the actual filesize in Lightroom in the metadata panel if you set it to "all" but I don't think you can show it on the badge in the Library grid display. A 6MP 16-bit uncompressed tiff should be about 36 megs, so close enough..

Not all records shown for selection - CR 2008

I have a crystal report that has dynamic record selection. The selections are set to allow multiple, allow discreet, allow ranges.
When I run the report I am not shown all records on the file to choose from.
The file has approx 6000 records. Does anyone know of any limitations? The file I am writnig report for is from Item Master in SAP. Thanks.

There is a registry entry that limits the number of records shown in a list of values (LOV). The default value is 1000. The registry key is Crystal reports version specific. You should be able to find the key by searching the forum for LOV 1000 or similar...
HTH,
Carl
Moderators: This question comes up once a week, it seems. Maybe we should "pin" the answer to the top of the forum board?

How to set default number of records shown in report table?

How can I set the default number of records shown in a table report?

This is how report attributes page should look like and there is the number of rows where you enter whatever you need:
http://i44.tinypic.com/es95bn.gif
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

No records shown in report ?

I have created a crystal report using ado.net dataset ("OleDB to SQL server database") and load it to a crystal report viewer in testreport2.aspx. No errors when run but no records where shown.
There is no problem with the data table return from GeneralProduct class as the DropDownList1 contains 30 item and textbox1 displays a total of 30 records from data table return.
=================================================
Imports CrystalDecisions.CrystalReports.Engine
Partial Class testreport2
    Inherits System.Web.UI.Page
    Private oRpt As ReportDocument
    Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
        If Not IsPostBack Then
            CrystalReportViewer1.EnableDatabaseLogonPrompt = False
            oRpt = New ReportDocument
            oRpt.Load(Server.MapPath("CrystalReport2.rpt"))
            Dim _GeneralProduct As New GeneralProduct
            _GeneralProduct.GetGeneralProductDataTable()
            TextBox1.Text = "Record Count [" & CStr(_GeneralProduct.RecordsCount) & "]"
            oRpt.SetDataSource(_GeneralProduct.oDataTable)
            CrystalReportViewer1.ReportSource = oRpt
            CrystalReportViewer1.DataBind()
            CrystalReportViewer1.RefreshReport()
            dd.DataTextField = "ProductID"
            dd.DataValueField = "ProductID"
            dd.DataSource = _GeneralProduct.oDataTable
            dd.DataBind()
            _GeneralProduct = Nothing
        End If
        If IsPostBack Then
            oRpt = Session.Item("oReport")
            CrystalReportViewer1.ReportSource = oRpt
        End If
    End Sub
    Protected Sub Page_Unload(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Unload
        Session.Add("oReport", oRpt)
    End Sub
End Class
=================================================
Someone please assist....
Edited by: Kong Meng Chang on Aug 4, 2008 3:13 PM

Hi there,
Using Visual Studio 2008, I have created a crystal report with ado.net dataset ("OleDB to SQL server database") and load it to a crystal report viewer in testreport2.aspx. No errors occurs when run but no records where shown.
There is no problem with the data table return from GeneralProduct class as the DropDownList1 contains 30 item and textbox1 displays a total of 30 records from data table return.
Imports CrystalDecisions.CrystalReports.Engine
Partial Class testreport2
    Inherits System.Web.UI.Page
    Private oRpt As ReportDocument
    Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
        If Not IsPostBack Then
            CrystalReportViewer1.EnableDatabaseLogonPrompt = False
            oRpt = New ReportDocument
            oRpt.Load(Server.MapPath("CrystalReport2.rpt"))
            Dim _GeneralProduct As New GeneralProduct
            _GeneralProduct.GetGeneralProductDataTable()
            TextBox1.Text = "Record Count [" & CStr(_GeneralProduct.RecordsCount) & "]"
            oRpt.SetDataSource(_GeneralProduct.oDataTable)
            CrystalReportViewer1.ReportSource = oRpt
            CrystalReportViewer1.DataBind()
            CrystalReportViewer1.RefreshReport()
            DropDownList1.DataTextField = "ProductID"
            DropDownList1.DataValueField = "ProductID"
            DropDownList1.DataSource = _GeneralProduct.oDataTable
            DropDownList1.DataBind()
            _GeneralProduct = Nothing
        End If
        If IsPostBack Then
            oRpt = Session.Item("oReport")
            CrystalReportViewer1.ReportSource = oRpt
        End If
    End Sub
    Protected Sub Page_Unload(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Unload
        Session.Add("oReport", oRpt)
    End Sub
End Class
Someone please assist....
Edited by: Kong Meng Chang on Aug 4, 2008 3:13 PM

How to set default number of records shown in an interactive report table?

How can I set the default number of rows shown on an interactive report?
The default seems to be 15, I can't find where this can be changed.

Hi John,
When you're logged into the development interface, run the page with the IR. Set the rows from 15 to 5 (for example) and click "GO". Now click on the Actions Menu icon (the green gear), click "Save Report". "Save as: As default report settings". Click Apply and your rows will be set.
Martin
[http://apex-smb.blogspot.com/]

Records shown in Who's who search result

Hi Experts
I have one requirement regarding the search results of Who's who in employee search on ESS. My client want that in the search results of Who's Who, only active employees of the company will be displayed. In other words employees with inactive and withdrawn status should not be displayed in the search results.
Can you please guide me how can I restrict the system to display only the active employees.
Thanks in advance
Thanks & Best Regards
Sheetal Gupta

I think this is not possible
whether active or in active the who is who search gives all the personal numbers based on the various options given for search in general search and advanced search

Record not shown in table control

Hi experts,
I am working on the module pool program with a screen 0100. There is a table control called TABL_MATR in screen 0100.
There is no error while compiling the program. But no record shown when a record added into the table control.
I do not want to use the headerline in the program, because I intented to do it in OO way.
Record shown if I do like this:
DATA: ITAB_TRAY TYPE STANDARD TABLE OF LS_TRAY WITH HEADER LINE.
In PBO
loop at itab_tray " record show in the table control
whereas record not shown if do like this:
DATA: ITAB_TRAY TYPE STANDARD TABLE OF LS_TRAY.
In PBO
loop at itab_tray into wa_tray " no record show in the table control
Can someone guide me how to do it in the right way?
Please help.
Thanks in advance.

Hi all,
I have added the below images.
1) http://i566.photobucket.com/albums/ss106/wkw510/pic6.jpg
2) http://i566.photobucket.com/albums/ss106/wkw510/pic7.jpg
3) http://i566.photobucket.com/albums/ss106/wkw510/pic8.jpg
I have also followed what Devendra's suggested, however the same error message I get:
"ITAB_TRAY" is not a structure or internal table with header line.
As such I have changed the statement
module fill_table_control output.
MOVE-CORRESPONDING wa_tray TO itab_tray.
endmodule.
to
module fill_table_control output.
APPEND wa_tray TO itab_tray.
endmodule.
After changed, compiled no error.
But, when I started to use the program I got another error which closed the whole SAP screen.
Therefore I tried to change the TABLE CONTROL setting to
4) http://i566.photobucket.com/albums/ss106/wkw510/pic10.jpg
Now, everything is okay but I only get the latest record shows in the TABLE CONTROL. The record I inserted display more than one time, and filled all the table control.
5) http://i566.photobucket.com/albums/ss106/wkw510/pic11.jpg
I am wondering should we include
MOVE-CORRESPONDING wa_tray TO itab_tray.
or
APPEND wa_tray TO itab_tray.
According from Devendra, the PBO should only has this code
loop at itab_tray into wa_tray
    with control tabl_matr
    cursor tabl_matr-current_line.
*    module fill_table_control.   "shoule we exclude this?
endloop.
If I exclude the above code, the table control only show one record, regardless how many records are inserted.
Something is not right here, but just cant find it out.
Please help.

Report download to power point doesn't show all records

dear experts,
I have a report with a tape deck below, so it shows only records 1-25. When I click download to excel, every record is downloaded (1-all rows) and this is fine. But, if I download to power point, only the records shown on the dashboard (e.g. 1-25) are downloaded into power point.
Our quality assurance claims, that the behaviour for both download options should be the same, and not downloading to excel having every row and the power point showing limited rows.
Is there a way to download the whole report, each row, to power point (without clicking on tapedeck to show all) ??
Thanks in advance.
best regards,
Thomas

problem solved
modify report - results(answers) - click on printer icon (PDF and Print Control) - Print Rows - set to "All"
regards,
thomas

Trace to find who out who has deleted / modified the attendance record

Dear All
Some one has deleted the attendence record of a particular user of previous month , so how i can track who has deleted / modified the same in salary slip it is showing 1 leave record for the same month, but while checking throught pa30 there is no record shown for the same . can you please tell me how to trace that and which tables are updated once we update the attendence and while processing the salary slip , from which table it picks the leave availaed data .
Thx
Shilpa
Edited by: Shilpa on Nov 13, 2009 11:31 AM

Hi Shilpa,
You have to activate the audit Trail.
RPUAUD00 isthe program to see the changes in infotypes records, but before that you have to configure T585A, T585B, T585C
Regards,
Kapil Kaushal

Spry Data Set - Possible to limit number of records show

Hi,
I am totally new to Spry in Dreamweaver. I tried searching the forums for an answer but I could not find anything on how to limit the number of records shown.
For example - I have 100 rows of information in my table. When I do the Spry Data Set and use the Master/Detail page I only want 20 records to show. Otherwise the page looks very long and odd. Is it possible to just show the first 20 records and the ability to scroll or link the next 20 and so on?
If you have a link to a tutorial or more information that would be greatly appreciated.
Thank you,
Kathy

have a look here http://labs.adobe.com/technologies/spry/samples/data_region/SpryPagedViewSample.html

How To Count Filtered Records

Hi
We have a report, which has a couple of sections in it, and are trying to include a count in the summary section, which should correspond to the number of records shown in the detailed section.
The detailed section has a filter applied, and that filter is not being taken into account in the Count at summary level.
How do I get the Count() function to count records after the filter has been applied.
The structure of the Webi looks something like this:
Report Body
> Section on Source Vendor Country Key
   >> Text
   >> Count (This should show the count of the underlying items)
   >> Section on Source Vendor Key
      >>>> Block of Data 1
      >>>> Block of Data 2
      >>>> Filter on Section on Source Vendor Key
The "filter on Section on Source Vendor Key" restricts the data in that section, and does it's work correctly
The "Count" in the top section is supposed to count the number of times Block of Data 1 is returned, but is showing that count regardless of whether the filter is applied or not. In other words, if I apply the filter, I see a count of 2, and if I remove the filter, I also see a count of 2. If the filter is applied, only 1 set of data comes back, so I want that Count to show 1 when the filter is applied.
Any ideas?
Cheers,
Andrew

Have you tried using the count as below?
=count(object) in Block
Thanks,
Karthik

How to get the total record count for the report

Hi,
How can I get count of the total records shown in the report. When we set the report attributes, we have an option "Set Pagination from X to Y of Z"
Does anyone know how can I get the Z value from APEX variables.
I know we can use that query and get the count but I just want to know how we can use APEX Variables effectively.
Thanks in advance.

You write a loop, something like this:
Go_block('B1');
If not form_success then
Raise Form_Trigger_failure;
End if;
First_Record;
If not form_success then
Raise Form_Trigger_failure;
End if;
Loop
If :system.record_status in('CHANGED','INSERT') then
-- modify the record here--
End if;
Exit when :System.Last_Record = 'TRUE';
Next_Record;
End Loop;
First_Record;But be very careful-- If your block can fetch a large number of rows, (over 100), this loop can take a long time, and you should not use this method. The loop will continue fetching more rows from the database until all rows satisfying the query are retrieved.

Calculate Days between same date field in multiple records, looping for each record

Be patient as I am a newbie to Sql Server (using 2008 R2) and SSIS. I have looked at multiple solutions in this and many other forums before submitting the question.
I am looking at records to identify the number of days between two dates. We review drug information. A member uses drug A (Code identifies this called GPI) and has refills throughout time. The goal is to calculate the days between Refill
1 and refill 2, then refill 2 to refill 3, etc. When that member record set is complete, we move to the next member record set.
The basic data would be as follows. Each record shown below would be a separate record in a single table :
Member
Drug Code
DateService
Days Between
1
A
3/1/2012
0
1
A
3/27/2012
27
1
A
4/21/2012
26
1
A
6/15/2012
56
1
F
2/25/2012
0
1
F
3/20/2012
25
1
F
4/17/2012
29
1
F
8/1/2012
107
5
B
2/15/2012
0
5
B
3/10/2012
25
5
B
4/10/2012
32
5
B
6/28/2012
80
5
B
7/10/2012
13
5
B
8/20/2012
42
The days between is the value I am looking to calculate. The First record for the grouping of Member and Drug Code will be zero ( 0 ) as there is no preceding date to calculate against. The process would then loop through the records at the grouping
(Member and Drug Code) until those records are calculated. It would then move on to the next group of Member/Drug records.
Any assistance would be greatly appreciated. Any clarification I can provide, I would be more than happpy too. Thank you in advance!

TSQL- Finding the difference in days of multiple records in SQL ServerWITH OrderDates AS (
SELECT
ROW_NUMBER() OVER (ORDER BY OrderDate DESC) AS RowNumber,
OrderDate
FROM OrdersTable
WHERE SKU = 'AA0000'
SELECT
AVG(DATEDIFF(DD, O2.OrderDate, O1.OrderDate)) AS AverageFrequency
FROM OrderDates O1
LEFT JOIN OrderDates O2
ON O2.RowNumber = O1.RowNumber + 1
Fabio Bilicki

Disabling the dropdown LOV for existing records in SQL updateable report

Hi All -
I have a SQL updateable report which has 3 columns. One of the column is a named-LOV. This report also provides the functionality of inserting new rows.
Is there a way to only show the named-LOV dropdown list for only the new records to be inserted i.e. when we click on "Add Row". For existing records, I donot want to show the dropdown.
Please provide your thoughts.
Thanks,
-Seenu

Thanks Robert -
I guess I didn't put my question right in my earlier posting.
Basically this report provides updates and inserts both (Its a SQL Updateable report)
One of the column is a Named-LOV (select list dropdown). For the existing records shown in this report, this select list should be disabled. But for the new records while inserting a new row into this report, the select list dropdown should be shown to the user with an option to choose values from selectlist.
Thanks,
-Seenu

F.38 no records shown

Similar Messages

Maybe you are looking for