F.81 reverse postings error 00 065: Enter date in the format ..____

Hi When we run F.81 in some cases we get the error:
00 065: Enter date in the format __.__.____
In the header from the document I don't see difference with the working one's
How we can solve this?

Hi,
Did you have an upgrade sometime back.
During upgrade to 604, a field is activated, in the active screen variant. T-code OLMRLIST with following input:
Transaction "****"
Screen variant ******
Program "*******"
Screen "****"
Then deactivating the "with contents" checkbox on "reference date"-field.....and problem was solved
This what I've done when I encountered teh same problem sometime back.
Good Luck,
Raghu

Similar Messages

Error While entering data in VA01

Hi,
I get the following error while entering data for "Plant" in Sales order creation (VA01). Can anyone please tell me how to solve this problem.
Runtime Errors SAPSQL_INVALID_TABLENAME
Except. CX_SY_DYNAMIC_OSQL_SEMANTICS
Date and Time 27.04.2009 12:57:13
Short dump has not been completely stored (too big)
Short text
A table name, specified in an SQL command, is unknown.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLV61Z" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SEMANTICS', was
not caught in
procedure "SEL_KONDTAB" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
An invalid table name "A996" was specified in an Open SQL command:
Due to one of the following reasons, the error occurs only at runtime:
- the table name was specified dynamically, or
- the SELECT clause, WHERE clause, GROUP-BY clause, HAVING clause, or
ORDER-BY clause was specified dynamically.
Missing RAISING Clause in Interface
Program SAPLV61Z
Include LV61ZU01
Row 260
Module type (FORM)
Module Name SEL_KONDTAB
Trigger Location of Exception
Program SAPLV61Z
Include LV61ZU01
Row 724
Module type (FORM)
Module Name SEL_KONDTAB
Source Code Extract
Line SourceCde
694 and kschl = se_kschl
695 and datbi >= se_date
696 and datab <= se_date
697 and (coding_tab).
698 endif.
699 endif.
700 else.
701 if t681-ksdat is initial.
702 if not <entrytab> is assigned.
703 select * from (t681-kotab) appending table <cond_tab>
704 where kappl = se_kappl
705 and kschl = se_kschl
706 and (coding_tab).
707 else.
708 select * from (t681-kotab) appending table <cond_tab>
709 for all entries in <entrytab>
710 where kappl = se_kappl
711 and kschl = se_kschl
712 and (coding_tab).
713 endif.
714 h_subrc = sy-subrc.
715 if select_split ne 0.
716 modify coding_tab from coding_alter index select_split.
717 select * from (t681-kotab) appending table <cond_tab>
718 where kappl = se_kappl
719 and kschl = se_kschl
720 and (coding_tab).
721 endif.
722 else.
723 if not <entrytab> is assigned.
>>>>> select * from (t681-kotab) appending table <cond_tab>
725 where kappl = se_kappl
726 and kschl = se_kschl
727 and datbi >= se_date
728 and datab <= se_date
729 and (coding_tab).
730 else.
731 select * from (t681-kotab) appending table <cond_tab>
732 for all entries in <entrytab>
733 where kappl = se_kappl
734 and kschl = se_kschl
735 and datbi >= se_date
736 and datab <= se_date
737 and (coding_tab).
738 endif.
739 h_subrc = sy-subrc.
740 if select_split ne 0.
741 modify coding_tab from coding_alter index select_split.
742 select * from (t681-kotab) appending table <cond_tab>
743 where kappl = se_kappl
Thank you in advance....
Regards,
Sriram.

An invalid table name "A996" was specified
in an Open SQL command
Find out the transport request pertaining to Table A996 and ensure that both that request and the configuration request pertaining to that table are moved simultaneously.
thanks
G. Lakshmipathi

Error when trying to enter data in the textarea using settext in 9.3

not allowing to enter data in the textfield using settext and throwing below error
Cause: oracle.forms.handler.TextAreaItem cannot be cast to oracle.forms.handler.TextFieldItem

I had the same problem.I think this is a bug with 9.3.The workaround I used was to record: click the Text Area,go to Functions menu->edit->Edit,enter the text.Stop recording.Then you can playback.

DB Connect Load - "Unknow error while uploading data from the DB Table"

Hi Experts,
We have our BI7 system connected to Oracle DB based third party tool. The loads are performing quite well in DEV environment.
I would like to know, how we transport DB Connect datasources to Quality systems? Any different process to be followed for DB Connect datasources?
At present the connections between BI Quality and the third party quality systems are established. We transported the DataSource from BI DEV system to BI quality system, but on trigerring an infopackage we are not able to perform loads. It prompts - "Unknow error while uploading data from the DB Table".
Also on comparing the DataSources in DEV system and Quality system there are no fields in "Proposal" tab of datasource in Quality system. Also I cannot change or activate Datasource in Quality system as we dont have change access in quality.
Please advice.
Thanks,
Abhijit

Hi,
Sorry for bumping an old thread ....
Did this issue get ever get resolved?
I am facing the same one. The loads work successfully in Dev. The transport for DBConnect DS also moved in successfully.
One strange this is that DB User for dev did not automatically change to db user from quality when I transported the DBConnect datasource. DBCon DS still shows me the DB User from Dev in Quality system
I get "Unknown Error" whenever I trigger the data package.
Advait

Error occurred moving data from the transformation RECON_SEQ_GEN: to the transformation FILTRANS.

Hi,
Today one my task in the DAC Etl failed and when I opened the DAC log file of it. I saw the error description as below
Error while contacting Informatica server for getting workflow status for PLP_SRC_WH_AP_Invoice_Reconciliation
Error Code = 36331:Unknown reason for error code 36331
Since there is no much information in DAC log file about the failure, I opened the PLP_SRC_WH_AP_Invoice_Reconciliation session log file.
The error description in the session log file says.
There is an error in the port [NEXTVAL]: The default value for the port is set to: ERROR(<<Expression Error>> [ERROR]: transformation error
... nl:ERROR(u:'transformation error')).
2014-01-14 08:00:45 : ERROR : (582188 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Server) : node01_ : TT_11023 : An error occurred converting data in the port [NEXTVAL]. The row was dropped.
2014-01-14 08:00:45 : ERROR : (582188 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Server) : node01_ : TT_11021 : An error occurred moving data from the transformation RECON_SEQ_GEN: to the transformation FILTRANS.
2014-01-14 08:00:45 : ERROR : (582188 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Server) : node01 : CMN_1086 : RECON_SEQ_GEN: Number of errors exceeded threshold [1].
2014-01-14 08:00:45 : INFO : (582188 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Server) : node01_ : CMN_1053 : : Rowdata: ( RowType=-4(error but dropped due to abort) Src Rowid=1186281 Targ Rowid=1186281
NEXTVAL (ROW_WID:Int:): "(NULL)"
I am not sure of this error and I have never seen before. Can any one share some ideas on how to tackle this error and make the task execute successfully.
Many Thanks.

Hi,
fist check weather any special characteristics if not
check in data source under this we have fields tab check the format of a particular field format internal/external/check u choose internal format, if any check routine once
use Semantic Groups in the DTP.
Try it
Thanku
lokeeshM
Edited by: lmedaSAP_BI on Oct 20, 2010 6:44 AM

Double character input error when entering data in numbers using Bluetooth keyboard.

Using a bluetooth keyboard (Logitech) sometimes causes a double character input when entering data in numbers.
For example if wish to enter the number "22" or the word "in" they become "2222" and "iinn". Pressing enter of tab also causes a double jump
This problem is not always solved by turning keyboard off and on or by closing down and restarting numbers.
This problem does not occur in any other app.
I have used 2 different Logitech keyboards (ultra-slim and the recently new folio keyboard) and both caused the same problem.
The error is sporadic but frequent and has lead to me often having to switch back to touch input.
Very frustrating considering these excellent keyboards are ideal for using in numbers when working correctly!
ANy advice would be much appreciated

Zombie,
Not much help I'm afraid, but I just saw your post & wanted to let you know that I have the same problem, but for me it manifests itself in many apps, and it happens with the Apple bluetooth keyboard
. The only thing I've noticed is that it only seems to happen when I first start typing after not using the keyboard for a while (I'm not sure how long a while is, but maybe 30 seconds or so). Then I'll type & the first few letters will be fine, and then one letter double-types, and then it's fine again until I stop using it for whatever the threshold amount of time is. I'm guessing that it has something to do with the iPad's battery management & that it's shutting off the connection to the keyboard or something & once it picks it back up, then it double-types that letter.
At least in Pages, it isn't as big of a deal because I know it's coming, I can correct it & then type for a long time. In Numbers, my keyboard use is much less consistent, so I need to be more cognisant of it.

ACS v3.3 Error after entering data

We tried to configure the ACS v3.3 server but there is an ERROR happening on the server webpage while we feed in data. After feeding the data the ACS server's webpage cannot be accessed anymore.
ATTACHMENT:
I am attaching a snapshot of the Error. You can see the Error at the bottom of the page within the web-browser's status Bar.
This error comes as soon as you click on CONFIRM PASSWORD textbox (as shown in attached snapshot).

This looks like a java issue.
Do you have a JVM
1) installed, and
2) enabled
If you install the Sun JVM with mozilla or firefox there is a java debug window which is very useful for finding errors.
However, v3.x has been around for ages and the web pages pretty much had any issues ironed out ages ago
Darran

How to know whether entered date is SAPdate format or User dateformat.

Hi all,
I am uploading data from SAP to internal table ,
here I need to do below logic ,
If user entered SAP dateformat in excel , no need to convert after uploading.
elseIf user entered user default need to convert to SAP date format.
If user entered in other foramt.
need to give error.
so , how to know whether entered data is in SAP format or not.
Regards,
vinesh

Try this logic
IF call fm DATE_CHECK_PLAUSIBILITY = true
"date etered in SAP internal format
ELSE if call fm CONVERT_DATE_TO_INTERNAL = true
"date entered in user format
else.
"incorrect format
endif.
Regards
Marcin

Error while loading data into the cube

Hi,
I loaded data on to PSA and when I am loading the data to the cube through DataTransferProcess, I get an error (red color).
Through "Manage", I could see teh request in red. How do I get to knoe the exact error? Also what could be the possibel reason for this?
Also can some one explain the Datatransfer process(not in process chain)?
Regards,
Sam

Hi Sam
after you load the data through DTP(after click on execute button..) > just go to monitor screen.. in that press the refresh button..> in that it self.. you can find the logs..
otherwise.. in the request screen also.. beside of the request number... you can see the logs icon.. you can click on this..
DTP means..
DTP-used for data transfer process from psa to data target..
check thi link..for DTP:
http://help.sap.com/saphelp_nw04s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
to load data in to the datatargets or infoproviders like DSO, cube....
in your case.. the problem may be.. check the date formats.. special cherectrs... and
REGARDS
@JAY

LKKBLF99   runtime error while export data to the local file

Hi experts,
i got this error while i export data to the local file.
Runtime Errors         OBJECTS_NOT_CHARLIKE
Date and Time          10.09.2011 13:32:43
Short text
     The current statement requires a character-type data object.
Error analysis
    At the statment
         "STRLEN( obj )..."
    , only character-type data objects are supported at the argument
    position "obj".
    In this particular case, the operand "obj" has the non-charcter-type type
    "P".
"OBJECTS_NOT_CHARLIKE"
"SAPLKKBL" or "LKKBLF9
"GEN_FIELD_OUT2"
Include               LKKBLF99
Überführung int. in ext. Format via Konvertierungsexit
    if not gs_fc-convexit is initial or                     "INS TECH11
       not gs_fc-inttype ca 'CN'.
elseif not gs_fc-convexit is initial.            "DEL TECH11
      write to gs_out-hlpchar left-justified.
      gs_out-hlplen = strlen( gs_out-hlpchar ).
ansonsten entspricht sich min. Ausgabelänge und Ausprägungslänge
    else.
      if gs_fc-tech_form ne 99.
        gs_out-hlplen = strlen( ).
      endif.
    endif.
endif.
the error says the operand "obj" has the non-charcter-type type " P" .
i do debug on this and find the LS_FIELDCAT-INTTYPE = " P". so i changed it the QUAN type with length 13 decimal places 2. i can't change it in "C" char type or "NUMC" type because i need the output in decimals. the output is for amount and quantity so need this in decimal places up to 2 or 3.
but still find the same, i do debug on it after change it into QUAN type. find the same value for LS_FIELDCAT-INTTYPE = " P".
let me know how can i define this in char type with decimal places or what.
Please give some suggestion, if you need code, i will post the code.
Thanks in advance
Sachin

Hi Sachin,
Check this links.
[Run time error|OBJECTS_NOT_CHARLIKE : ALV export to local file;
[Error|Runtime error : OBJECTS_NOT_CHARLIKE;
Regards,
Madhu.

Error in exporting data to any format after user has cancelled the request

Hi all
I have a scenario with crystal report when open from SAP B1 for which I need your expertise guidance.
The situation is as follows.
After I enter parameters to a report, its opens up. When I export the data to pdf, the data is correct.
Now, I press the refresh button on the report. Now the parameter screen opens up but I dont change any values, and press CANCEL.
If I export my report (which has been open since the first time I opened from SAP screen), the data exported is different (The data shown on report is different).
After running the SQL profiler, I observed that the crystal report is actually executing the procedure with NULL PARAMETERS when I CANCEL and export the data though the parameters passed to the already open report is different.
Any inputs to solve the above problem is really appreciated.
Environment----
SAP B1 version 2005B, patch 41
Crystal report version 9
VB 6
Thanks
Rashmi

Please note;
This forum is dedicated to topics related to custom application development or deployment with Crystal Reports in .Net. This includes full versions of Crystal Reports as well as those versions of Crystal Reports bundled with Microsoft Visual Studio .Net.
As you do not appear to be using Crystal Reports, please repost to a correct forum.
Ludek

Showing data in the format enterred (ASP JS Pages)

Hi All,
I'm building an ASP Javascipt website that stores the data in
an MS SQL database, where there is a requirement for a large amount
of text (like a news story) I'm using a text area field to enter
the the data, and a nvarchar field to store the data. The problem
that i have, is that when entering the data i can format it so that
you can differentiate between different paragraphs.
However when the data is returned in a webpage, it shows all
of the data in one paragraph, in otherwords instead of looking like
this question, the returned data looks like the data below, I would
be grateful if you could tell me how to format this so that the
data is displayed in the format entered -
Thanks
#Example#
Hi All, I'm building an ASP Javascipt website that stores the
data in an MS SQL database, where there is a requirement for a
large amount of text (like a news story) I'm using a text area
field to enter the the data, and a nvarchar field to store the
data. The problem that i have, is that when entering the data i can
format it so that you can differentiate between different
paragraphs. However when the data is returned in a webpage, it
shows all of the data in one paragraph, in otherwords instead of
looking like this question, the returned data looks like the data
below, I would be grateful if you could tell me how to format this
so that the data is displayed in the format entered -Thanks
#

<%=yourRS.Fields.Item("yourCol").Value.replace(/\n/g,"<br>")%>
"GTN1707" <[email protected]> wrote in
message
news:em3l2m$eqs$[email protected]..
> Hi All,
>
> I'm building an ASP Javascipt website that stores the
data in an MS SQL
> database, where there is a requirement for a large
amount of text (like a
> news
> story) I'm using a text area field to enter the the
data, and a nvarchar
> field
> to store the data. The problem that i have, is that when
entering the data
> i
> can format it so that you can differentiate between
different paragraphs.
>
> However when the data is returned in a webpage, it shows
all of the data
> in
> one paragraph, in otherwords instead of looking like
this question, the
> returned data looks like the data below, I would be
grateful if you could
> tell
> me how to format this so that the data is displayed in
the format
> entered -
>
> Thanks
>
> #Example#
>
> Hi All, I'm building an ASP Javascipt website that
stores the data in an
> MS
> SQL database, where there is a requirement for a large
amount of text
> (like a
> news story) I'm using a text area field to enter the the
data, and a
> nvarchar
> field to store the data. The problem that i have, is
that when entering
> the
> data i can format it so that you can differentiate
between different
> paragraphs. However when the data is returned in a
webpage, it shows all
> of the
> data in one paragraph, in otherwords instead of looking
like this
> question, the
> returned data looks like the data below, I would be
grateful if you could
> tell
> me how to format this so that the data is displayed in
the format entered
> -Thanks
>
> #
>

Getting error while uploading data using the EXCEL( GUI_upload)

Dear Freinds,
I am uploading data from my excel sheet to my Custom table . I am using the below code
call function 'GUI_UPLOAD'
exporting
filename = l_fn
filetype = 'BIN' "'ASC'
has_field_separator = 'X'
tables
data_tab = p_i_ins_db
exceptions
others = 17.
i can see in my internal P_i_ins_db ...all the data is coming in encrypted format.
The flat given to me is the .CSV file .
Could any one please let me know how i can upload the data which is there in .csv file.
regards
syamala

Hi Syamala,
Before using the GUI_UPLOAD to upload the data from the excel file to the internal table,you can try usng the Function Module 'SAP_CONVERT_TO_TEX_FORMAT' or 'SAP_CONVERT_TO_CSV_FORMAT' as it helps n formatting the data.
In case you have any further clarifications,do let me know.
Regards,
Puneet Jhari.

How to get pixel data in the format I want

I'm writing a format plug-in and am having some difficulty getting the pixel data from photoshop in the format I want. From what I gather from the documentation in the SDK I need to specify the following to tell photoshop what format to deliver my pixels in:
theRect
loPlane
hiPlane
data
colBytes
rowBytes
planeBytes
planeMap
I specify all of these appropriately for a 32 bit rgba8888 uncompresssed image and it works just fine... but ONLY if the image I load in the first place matches the format I am requesting. If the image I load is some other format, like a 256 color image with a palette, gFormatRecord->advanceState() just fails with a nebulous -30500 error code (formatBadParameters) instead of delivering pixel data.
So my big question is this: Is Photoshop capable of doing the conversion and delivering the pixels to my format plug-in in my requested format? If it CAN do it, what might I be doing wrong? Please help! Thanks!!

You noticed you can use the planeMap[] array to permute the channels. It's not so obvious that Photoshop should offer generalised bit depth/colour space/palette processing. It can be argued that's the role of the plugin itself: to mediate between Photoshop's native image data (which it does offer conveniently) and whatever arbitrary image format the user requires. At least, that's what most of
my plugins do.
Sure, there are a few obvious conversions, but you have to stop somewhere... Sooner or later you'll be implementing stuff on the Photoshop side that
should be in a plugin. I don't have a big problem with the line drawn in the current API.

Validating a text field that has date in the format mm/dd/yyyy

How can I validate a text field such that it should be in the format mm/dd/yyyy and it should not be greater that a particular date.
for example the date I enter should not be greater than 01/01/2007

What you can do is use the SimpleDateFormat class to try and parse the text date into a Date object like this:
SimpleDateFormat sdf = new SimpleDateFormat("MM/dd/yyyy");
Date mydate = sdf.parse(textdate);if that fails than the date has the wrong format (you'll get a ParseException if I'm not mistaken).
The next step is to create a Date for 1/1/2007 and then do a date compare between your two dates. You can create a date yourself using the Calendar class.

F.81 reverse postings error 00 065: Enter date in the format __.__.____

Similar Messages

Maybe you are looking for

F.81 reverse postings error 00 065: Enter date in the format ..____