F110-Enhancement: User want to reran the same proposal after delete

Hi guys
It would be great if ane one having answers.
User want to rerun the same proposal when he likes to update the exchage rate after the payment proposal made .For this, he will delete the proposal and reran the same proposal.
This is for only Customers and not for Vendors as F110 itself taking care of vendors.
Here the requirment is when he reran the same proposal he checks new proposal documents with the documents existed in ZTABLE earlier(needs to be crated z table for entries RUN DATE,IDENTIFICATIN,ALL DOCUMENTS belongs to each proposal ). if all documents are same then no issue ..payment ran takes place and then delete those documents from ZTABLE.if not same, for those documents payment should be blocked(
i.e any new documents created first propal and reran proposal those new documents shold be blocked) and then delete those documents from ZTABLE too.
I found one BADI: FI_F110_SCHEDULE_JOB which is triggering before proposal made.
its having one structure F110V having only contains one vendor(lower limit of vendors) and only one customer ( lower limit of customers) so here i could not get all the vendors and all customers but i can get all open doucments from table BSID and BSIK .
it can be used to some extent but anyway useless.
BTE: 1860.
this can be used but user has to click the line item of the proposal run.if suppose there are more documents , it is also useless.
Another BTE:2040,2060
I can use these BTEs to delete those documents stoed in ZTABLE after payment made.
kindly suggest me if anybody have any idea on this enhancement.
Thanks
Babu

Hi,
When delete event is fired, in PFR capture the selected tab details
tabBean.getSelectedIndex(pageContext);
store it in session
then
forward it to warning/dialog page
post the warning page results to calling page
in the process form request of calling page capture the event
use
tabBean.setSelectedIndex(pageContext,value)
value get it from session
pageContext.getSessionValue() API
Regards
ivar

Similar Messages

2 users want to use the same folder

which is the best way when 2 users want to use the same folder.
i know that i can use the public folder
or
create a folder and change the protection so that the 2 users have all rights
is this correct or exist more solutions for this problem?

you could consider a solution such as Dropbox ...

When in the middle of doing work Firefox just crashes, A sorry window pups up asking if user wants to Reload the same session or start a new session. This never happen with previous versions.

Since I updated Firefox to the latest version it crashes a lot and although I can reload the session I was working with it is annoying and time consuming. I always keep my computer 100% updated and virus free as I always run Norton. I also have 4 G of RAM and 500 G disk drive so it is not lack of RAM and never keep more that 3 windows open at the same time.

(1) Firefox's built-in post-crash page has not been a real HTML page for a long time (for example, from the time of Firefox 22, see: [https://support.mozilla.org/en-US/questions/968212 Want to save LOTS of versions of "Restore Session.xht" from the "oops ..." page for later use]). If you had this working differently with Firefox 25, that might have been created by an extension.
You can check to see whether extensions are disabled or need an update on the Add-ons page. Either:
* Ctrl+Shift+a
* orange Firefox button (or Tools menu) > Add-ons
In the left column, click Extensions. The disabled extensions cluster toward the bottom of the list. To poll for updates, use the "gear" button above the list and choose Check for Updates.
If you used the Reset feature (or Firefox automatically did a reset due to some problem during upgrading), you will need to reinstall missing extensions. The reset feature creates a folder on the desktop named Old Firefox Data. Do you have that folder? There may be data you can recover from it.
(2) There are many ways for history to get cleared, both internal to Firefox and external. Could you double-check your Privacy settings?
orange Firefox button (or Tools menu) > Options > Privacy
* The "Firefox will" drop-down says Remember History: Firefox shouldn't be clearing history, but an add-on or external software could do it
* The "Firefox will" drop-down says Use custom settings for history: inspect the "Clear history when Firefox closes" setting to make Firefox isn't set to clear history. Also check your add-ons and consider external software.
Firefox normally accumulates months of history. However, some of Firefox's database sizes are based on disk space available. If your hard drive is very full, Firefox might reduce the amount of history stored.

Hotmail / MSN email continuously sends me the same email after deleting

I have an iPhone4 and I have several email account. Only account I have issues with is my MSN email account. I can get new messages just fine however if I delete the email about 2 minutes later I get a "new" email indicator and it happens to be the email I just deleted. Same time stamp and everything. I have my settings to remove from the server when moved from my inbox and also to erase the deleted messages after 1 day. So my settings seem fine but this account is annoying.
How can I fix this?

Still waiting to hear from anyone.
Some of my friends with androids seem to be having the same problem. I've been keeping email's in my inbox for over a week just to delete them. This is getting annoying.
APPLE PLEASE HELP!

Today, I agreed to an automatic upgrade and now Firefox starts to open but stops. It says 3.6.11 and I have the same problem after deleting and reinstalling.

It bounces in Dock and stops, it never opens. Opening from .app opens in Dock and immediately disappears.

I downgraded to 3.6.10 and had the same problem. Downgrading to 3.6.9 resolved problem. Will retry upgrading later.
Maybe unrelated but 3.6.9 recommended I upgraded Adobe Flash Player from 10.1 r53 to 10.1 r85, which I did

How do I transfer my bookmarks from one computer to another? I have Firefox Home on my phone and I can get them there, but I want to have the same bookmarks on my home computer as I do on my work computer.

How do I transfer my bookmarks from one computer to another? I have Firefox Home on my phone and I can get them there, but I want to have the same bookmarks on my home computer as I do on my work computer. If I have a user name then where do I sign into Firefox, it should be that easy but I can't seem to figure it out.

Hey susanneyes,
Sounds like you want to set up Firefox Sync. This will allow you to keep all of your instances of Firefox synchronized. Just follow the steps in [https://support.mozilla.com/en-US/kb/what-firefox-sync?s=sync&r=0&as=s this article] and you'll be set.
Hopefully this helps!

Why can't two different users use Itunes on the same computer with different log ins

Why can't two different users use Itunes on the same computer with different log ins

Pmorgan5672 wrote:
Why can't two different users use Itunes on the same computer with different log ins
They can, but not at the same time.
If one user left iTunes running, and another user tries to use iTunes from a different Windows user ID, that second user will get an error message. If they really want to use iTunes, they either have to beg the first user to log in and close iTunes, or else they have to restart the computer.
If you are asking the technical reason why, it is something about context switching.

We are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient

we are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient.
Appreciate your support and if possible , how to do this?

If you want to work with Mac OS X, you need one computer per simultaneous user.
What you are describing, " Multiple simultaneous logins to a single computer" is not avialable on a regular Mac of any description, unless you decide to use Unix tools instead of Mac OS X.
Server will happily store files for many, many users and provide them to multiple (up to hundreds) of computers at "near hard Drive" speeds over Gigabit Ethernet. It can make the File Sharing part easy.

IR Date Filter - My date field is MM/DD/YYYY users want to filter by same

Hi,
I have a interactive report that has a date field and I put a "MM/DD/YYYY" display format on it.
The filter uses DD-MON-RR format in filtering which works fine but the users want to filter by same format of MM/DD/YYYY because they want to type it in. Is there a way to change the date format of the filter to match the display format of the fileld?
Also, if a valid date is entered in the wrong format no error occurs just no data.
Thank you,
BillC

Hi Billj,
I am not quite clear about your question. For the date field in the form you can create a validation for valid date and that will not accept the input if user type invalid date. if you want to format that date field in the form you can do that as well by choosing the date picker with your expected format (Date picker(dd/mm/yyyy).
Hope this will help,
Thanks,
M Tajuddin
http://tajuddin.whitepagesbd.com

User wants to schedule the process chain - what is the best practice

I posted earler and got the anwser.
Create a custom ABAP program that calls the RSPC_API_CHAIN_START Function Module, with a selection for the Process Chain where your user can enter the Meta Chain name to start the process.
To make it simpler for the user to execute this, create a custom tcode for them in SE93, so that they logon to your BW environment, call up that tcode, enter the Meta Chain name and execute. With this, they wouldn't have to have access to RSPC.
I did the above and the user not able to execute it since he doesn't have access to the cube/dso to update the cube.
To overcome this I wrote another abap program and used the
SUBMIt program user ALEREMOTE
and there is a problem.I called the process chain start program using ALEREMOTE .
Now the user needs access to authorization object S_BTCH_NAM and authorization field BTCUNAME with value ALEREMOTE.
So again due to SOX the basis doesn't want to give the necessary access.
What is the best solution.
How in general if the user needs to execute the process chain how they do it.
Please let me know. Thanks for your help in advance.
Senthil

Hi Senthil
In general production scenerio, we do not run process chain manually. To execute a process chain you should have necessary authorization. As you have assigned alertmote in the start variant, any user other thatn that will not be able to trigger the same.
Instead of alertmote , use the nornal start variant to trigger the process chain and give the user the normal authorization. Whenever user wants to run the infopackage manually or via process chain they should have the auth to view the infoprovider content as well....

Would 20 or more CC users have problems on the same LAN?

Sounds like a silly question but I just want to plan ahead.
I'm planning on having around 20 CC users at my house for a creative get together and I wondered
if we'd run into problems when we all connect to the web on the same private network and boot up
our various versions of Creative Cloud?
I figure this happens all the time in coffee shops and conventions but I've no idea if it'll be an issue on
a demostic connection. Our connections is pretty fast but wondered if there'd be licensing issues when
20 users all connect on the same IP.
Thanks in advance.

Never saw it happened. As long as they aren't all using the same Adobe ID, it will work.

I want to use the same SSID in two sites (central y remote)

I have several AP in H-REAP mode, one of them is in a remote location anthe other are in the central location. I want to use the same SSID in both locations with differents VLANS.
In the central site, i have 3 WLANS (SSID) whit 3 different VLAN eachother. I put the local swicthing in one SSID that I want to use in the remote site. In the remote location the users can authenticate and everything works fine but in the central location that SSID doesnt work, the user in the central location can not authenticate.
It seems that i can not use the same WLAN (SSID) and use it en both locations checking the local switching.
What can i do?
Many thanks for your help

Look I have 2 two VLANs Interfaces (vlan 252 & Vlan253) created on WLC, beside the management VLAN (ID 254), and there are 8 AP´s installed at the central location, each AP has been connected to my CORE Switch through switch ports mode Access vlan 254.
th aeuthentitcation i have been used is "LOCAL: WPA-WPA2-PSK" in both locations (Central and remote). In the remote sites, tha AP is connected to a cisco switch through switch port mode trunk, and I use VLAN 251. When the local switching feature is activeted on WLC, I can map the VLAN 251 (in te remote site) to the SSID I am using inthe central site and everything works fine but in the central locations the user can associste to he AP but they can not receive IP from the appropiate VLAN.
I don t know what parameter have to change....
Can you helpme?

Can I move applications from one user to another on the same computer?

If I have two users on one mac, can I move applications from one user to another on the same computer?
Thanks

By default, apps are installed for all the users in /Applications

How do I change the icloud account on my iphone? I want to use the same account for all my apple devices (macbook air and imac and iphone). I can't see where I can amend the iphone account because it is in grey?

I want to use the same account for all my apple devices (macbook air, imac and iphone). I can't see how I can amend the iphone account because it is in grey? I also can't remember the password for this account so i can't even delete it and start again?
Help!
Thanks

Deleting an iCloud account only deletes it from the Device, not from iCloud. In iOS 8, the name of this setting changed to "Sign Out" as that is a better reflection of what actually happens. Your iCloud data remains on the server, available to devices still signed into the account, but the device you sign out of the account on is disconnected from the account, and as a result, the iCloud data from that account is removed from the device. It will redownload to the device should you sign back into the account.
The only issue you'll run into when you switch between accounts is with my photo stream photos older than 30 days. When you delete (or sign out of) and account, your photo stream photos are deleted along with the other data from the account in question. However, unlike other data which remains on the server and can redownload to your device when you sign back in, my photo stream photos only remain in iCloud for 30 days. When you sign back in, you will only get back my photo stream photos added in the last 30 days (as older photos are no longer in iCloud to redownload). Like other account data, any my photo stream photos on your other devices signed into the account are unaffected by this. If you want to keep older my photo stream photos on your device as you change iCloud accounts, save them to your camera roll before deleting (signing out of) the account.

Ive lost my apple ID for my ipod, now i have an iphone and i want to use the same apple ID for both can someone tell me how to do this

I have lost my apple ID for my ipod, now ive got a new iphone and i want to use the same ID for both, can anyone one tell me how to do this? ( i no my ID for the iphone)

Just use the same ID.
These may alos help:
How to use multiple iPods, iPads, or iPhones with one computer
What is the best way to manage multiple...: Apple Support Communities

F110-Enhancement: User want to reran the same proposal after delete

Similar Messages

Maybe you are looking for