F150 Generate SAP idoc

Hi,
I have a problem for my test, when i run F110 with my program run date and my identification feature.
When i run printout. In Generate SAP IDoc , the printer is lock to $H208.
Where can i custom this parameter please?
Thanks.

Similar Messages

Generate DELVRY Idoc when Post goods issue is done in SAP

I need to generate an Idoc when post goods issue is done in SAP (outbound to SAP) .I understood that I can do this using the message control .The message type DESADV with the process code DELV will support this.
But I didnt understand how to trigger the Idoc.In the current scenario our Company is doing the post goods issue in SAP for the in three different ways.
1.Manually doing the post goods issue through the transaction VL02N
2. an Inbound Interface (using Idoc) which will do Post goods Issue in SAP
3.Another Interface using BAPI, which will, do post goods issue in SAP
I have to run my outbound interface when the post goods issue is done by all the above three ways. Can any one help me out in this?

You have to configure the output first .
You can use output type LAVA ( avaialble in Std SAP ) .
( Tcode is NACE , Select Application V2 -> Outputtypes ).
( Create condition records suitable to generate an output)
Next is ALE.
Setup a distribution Model ( for DESADV ) and all other setup for ALE i.e. Distribute Dist. Model / Generate Partner Profile .
In the Partner profile in WE20 select your partner system. Double CLick on Outbound Message DESADV ( this wd be there after you generate partner profile , if not add it here in outbound ) . On this screen goto tab MESSAGE CONTROL .
Application - V2
Message Type - LAVA
Process Code - DELV.
Now you are ready to go. The moment a PGI is done in any form an output LAVA would be proposed and processed using process code DELV.
Cheers.

Is it possible to generate outbound idocs for FI invoices? How?

Is it possible to generate Outbound idocs for FI invoices? How? or else i have to write program to get data in file and pass it to translator. Please help.

Dear Gabriel
Before letting you know the possibility, can you please let me know why you want such a requirement, since standard has not provided such copy control, to my knowledge.
As you would know order type KB is for consignment fillup where you are just transferring the goods from FG unrestricted to your own warehouse and that is why in standard you can see the copy control KB --> F8 which means you can raise proforma against delivery and not against fillup order.
So think of whether really you wanted to raise proforma against fillup order which is NOT recommended by SAP. However, still if you feel that the requirement is so to have, you can make the settings in VTFA.
thanks
G. Lakshmipathi

SAP IDOC shows status 03, but no file is written

We have SAP configured to generate delivery IDOCs when the SAP Delivery document is posted/saved. The IDOC is initially created with status 30. There is batch job RSEOUT00 every 30 mins that collects the IDOCs in status 30 and converts to status 03. When we review the IDOC processing screen, even though they are in status 03 and successfully written outside of SAP to a folder, there is no file in the folder. We are missing IDOCs. There is no real time external system integration. We are simply trying to write IDOC files to a folder.
Can you some please share your insights on how to resolve this issue?
Thanks in advance
Satish

RFC destinations, Logical systems, and then Partner profiles needs to be maintained. and You need to create the Distribution model in sender system.
Partner profiles maintained in both the systems, soure Outbound properties
Target Inbound properties.
if you have two clients in system it will be easily you can check.

Generate outbound idoc for Customer Master

Hi Developers,
I have requirement to generate outbound IDOC for Customer Master Data. I need to send customer master data through an Outbound IDOC. Can we generate an outbound DEBMAS06 idoc? Can someone help me finding a solution to this problem?
Thanks in advance for helping.
Regards,
Gajendra

Hi,
If you have done all the required settings (logical system, partner profiles, distribution model), then either transaction BD10 / BD14 will help you generate the IDOC.
If you want to send the idocs automatically, then you will to configure some program.
Unlike transaction data, Master data IDOCS are not triggered immediately, you will have to do the required configuration in SPRO.
Transaction SPRO
SAP Customizing Implementation Guide -->
SAP Web application Server --> Application Link Enabling --> Modeling and Implementing Business Processes -->
Master Data distribution --> Replication of Modified Data --> Creating IDOCS from Change Pointers
Take a look at this thread.
Re: automatic Idoc outbound
Regards,
Ravi
Note : Please mark the helpful answers
Message was edited by: Ravikumar Allampallam

SAP IDOC

Hi All,
I have few questions on SAP IDOC's
1. If we are using Standard IDOC, then is it only the config or any coding is required to populate the IDOC. Examaple Order03
2. If we Customize, then only customize fields needs to be populated or all the fields (SAP Standard and Custom fields)
Thanks & Regards
SM

Hi
1.. If we are using Standard IDOC, then is it only the config or any coding is required to populate the IDOC. Examaple Order03
Have to do complete configuration in the system.if required very less code in the fun module can be written.
see the below doc
2. If we Customize, then only customize fields needs to be populated or all the fields (SAP Standard and Custom fields)
Only code has to be written for the population of the custome fields in the custom segments of the Idoc extension in the user exit of the idoc.
Data Creation in Idoc
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an
asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
IDoc is a intermediate document to exchange data between two SAP Systems.
*IDocs are structured ASCII files (or a virtual equivalent).
*Electronic Interchange Document
*They are the file format used by SAP R/3 to exchange data with foreign systems.
*Data Is transmitted in ASCII format, i.e. human readable form
*IDocs exchange messages
*IDocs are used like classical interface files
IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
FOr testing you can use WE19.
How to create idoc?
*WE30 - you can create a IDOC type
For more information in details on the same along with the examples can be viewed on:
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30 )
Create Message Type ( WE81 )
Assign Idoc Type to Message Type ( WE82 )
Creating a Segment
Go to transaction code WE31
Enter the name for your segment type and click on the Create icon
Type the short text
Enter the variable names and data elements
Save it and go back
Go to Edit -> Set Release
Follow steps to create more number of segments
Create IDOC Type
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
Create Message Type
Go to transaction code WE81
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter
Click New Entries to create new Message Type
Fill details
Save it and go back
Assign Message Type to IDoc Type
Go to transaction code WE82
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
Check these out..
Re: How to create IDOC
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
go trough these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
2.IDOCs are independent of the sending and receiving systems.
3.IDOCs are independent of the direction of data exchange.
The two available process for IDOCs are
Outbound Process
Inbound Process
AND There are basically two types of IDOCs.
Basic IDOCs
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extended IDOCs
Extending the functionality by adding more segments to existing Basic IDOCs.
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30)
Create Message Type ( WE81)
Assign Idoc Type to Message Type ( WE82)
imp links
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
www.sappoint.com
--here u can find the ppts and basic seetings for ALE
http://sappoint.com/presentation.html
www.sapgenie.com
http://www.sapgenie.com/ale/index.htm
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
Try this..Hope this will help.
>>>> SAP ALE & IDOC<<<<
Steps to configuration(Basis) >>
1. Create Logical System (LS) for each applicable ALE-enabled client
2. Link client to Logical System on the respective servers
3. Create background user, to be used by ALE(with authorizaton for ALE postings)
4. Create RFC Destinations(SM59)
5. Ports in Idoc processing(WE21)
6. Generate partner profiles for sending system
The functional configuration(Tcode: SALE)
Create a Customer Distribution Model (CDM);
Add appropriate message types and filters to the CDM;
Generate outbound partner profiles;
Distribute the CDM to the receiving systems; and
Generate inbound partner profiles on each of the clients.
Steps to customize a new IDoc >>>
1. Define IDoc Segment (WE31)
2. Convert Segments into an IDoc type (WE30)
3. Create a Message Type (WE81)
4. Create valid Combination of Message & IDoc type(WE82)
5. Define Processing Code(WE41 for OUT / WE42 for IN)
6. Define Partner Profile(WE20)
Important Transaction Codes:
SALE - IMG ALE Configuration root
WE20 - Manually maintain partner profiles
BD64 - Maintain customer distribution model
BD71 - Distribute customer distribution model
SM59 - Create RFC Destinations
BDM5 - Consistency check (Transaction scenarios)
BD82 - Generate Partner Profiles
BD61 - Activate Change Pointers - Globally
BD50 - Activate Change Pointer for Msg Type
BD52 - Activate change pointer per change.doc object
BD59 - Allocation object type -> IDOC type
BD56 - Maintain IDOC Segment Filters
BD53 - Reduction of Message Types
BD21 - Select Change Pointer
BD87 - Status Monitor for ALE Messages
BDM5 - Consistency check (Transaction scenarios)
BD62 - Define rules
BD79 - Maintain rules
BD55 - Defining settings for IDoc conversion
WEDI - ALE IDoc Administration
WE21 - Ports in Idoc processing
WE60 - IDoc documentation
SARA - IDoc archiving (Object type IDOC)
WE47 - IDoc status maintenance
WE07 - IDoc statistics
BALE - ALE Distribution Administration
WE05 - IDoc overview
BD87 - Inbound IDoc reprocessing
BD88 - Outbound IDoc reprocessing
BDM2 - IDoc Trace
BDM7 - IDoc Audit Analysis
BD21 - Create IDocs from change pointers
SM58 - Schedule RFC Failures
Basic config for Distributed data:
BD64: Maintain a Distributed Model
BD82: Generate Partner Profile
BD64: Distribute the distribution Model
Programs
RBDMIDOC Creating IDoc Type from Change Pointers
RSEOUT00 Process all selected IDocs (EDI)
RBDAPP01 - Inbound Processing of IDocs Ready for Transfer
RSARFCEX - Execute Calls Not Yet Executed
RBDMOIND - Status Conversion with Successful tRFC Execution
RBDMANIN - Start error handling for non-posted IDocs
RBDSTATE - Send Audit Confirmations
FOr testing you can use WE19.
Reward points for useful Answers
Regards
Anji
Message was edited by:
Anji Reddy Vangala

Generating an IDOC with all segments filled every time

IDOC Experts,
I am new to IDOC/ALE and I am struggling with the following situation.
I am trying to create an ALE interface with a Transportation Management System. I have been able to configure ALE and IDOC to generate an IDOC XML file for message type DEBMAS. I have activated change pointers and I am seeing the changed customers when I run RBDMIDOC.
The problem is the external system will require the complete data every time the customer master is changed. Right now I am only seeing the changed segments in the IDOC file.
Is it possible to configure SAP to populate all of the segments every time a DEBMAS IDOC is generated?
Thank you in advance for any direction you can provide.
Brian Snyder

Hi Brian,
I tested my system and it does not work,I guess we can't set up mandatory.
I think if you know any user exit for that application,then fill the segments programtically.
Sorry for wrong information what i provided.
Thanks
Seshu

Import SAP IDOC in B1

Is it possible to import SAP IDOCS (e.g. ORDERS05) in B1? Is extra software needed?

Hi Johan,
Electronic File Format: the Tools is provided, and used to do most of the file transformations and imports.
It is used for all bank statements (import and export), is used to generate specific reports (Intrastat) and by SAP for specific legal requirements (i.e.the one asked by the French Legals to provide an electronic export on a specific format during controls).
Not the easiest thing to master, but a standard tool for file transformation from Inside the client (B1if will run on the server only, as you know).
sthat you are not restricted regarding the source format (you can even use a .rpt file as a source ).
If you search Inside the SCN, you'll find posts explaining how to use it.
Regards,
Eric

Generating the IDocs for some particular segments only......

Hi Gurus,
I have activates the change Pointers for generating the IDocs whenever the master dtaa is changed.
Is there any technique so that I can recive the IDocs containing only those segment's data which is relevant for me.
Abhi....

The question I have asked is not related to Inbound I Docs processing.
Actually I am sending the IDocs to Non-SAP system whenever any change is made to the master data, using the Change Pointers.
Now, the situation is that the file that is getting generated contains the data corresponding to many segments. So, is it possible to restrict the segments/fields for which the data is generated.
Thanks In Advance.......
Abhi.,,

Necessary configurations required to generate an IDOC

Hi Friends,
I want to know the necessary configuration that has to be done , inorder to generate an IDOC when a particular record is saved.
for example when I tried to change the QTY in Me22(PO), an IDOC, orders05 need tobe generated, which is not getting generated. Please let me know the configurations needed to generate an IDOC.
Thnaks in Advance,
Meghna.

Hi,
you need to call the outbound processing program for IDOC,
The system generates an IDoc of type ORDERS01, which is not yet transferred to the port (output mode Collect IDocs) for Tcode ME11.
Similarly you need to call the IDOC processing Function Module in User Exit of Tcode ME22
Refer
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7c9f43d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/0b/2a60c8507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/f2/660b378350c976e10000009b38f839/frameset.htm
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
idoc settings /people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
Also
/people/sravya.talanki2/blog/2005/10/27/idoc146s-not-reaching-xi133-not-posted-in-the-receiver-sap-systems133
IDOc testing - /people/suraj.sr/blog/2005/12/29/generate-test-case-for-an-idoc-scenario
Thanks
Swarup

How to create an extension for generated type idoc

Hi all,
Can u please look into this
How to create an extension for generated type idoc ? for example Idoc type BATMAS02

Enter transaction WE30 (ALE->Extension-> IDOC types->Maintain Idoc type)
- Type in your name of the extended IDOC type (usually starting with 'Z') and click on the Basic IDoc type, click the create icon.
- Click on Create new and enter a description and press enter.
- Click on ZIDOCTYPE01 and then on the Create icon.
- Enter ZIDOCTYPE as the segment type, click on Segment Editor.
- Enter a description for your segment type and create.
- Enter a description for your segment, enter each field required in your IDoc and press enter to validate.
- Save and generate, press back
- To release the segment choose Goto, Release from the menu.
- Check the box on the line of your segment.
- Save, back and enter.
- Your Idoc type structure should be displayed with your new segment.
- Save and back.
- To release the Idoc type choose Extras, Release type from the menu and Yes.
ALE FUNCTION MODULE ENHANCEMENTS
Having extended the IDOC type to contain additional fields for an inbound or outbound application, you now want to enhance ALE function modules for populating the additional segment on the outbound or applying the additional segment data on the inbound application.
The core working code for ALE processes for a given application area is always encapsulated in ABAP/4 function modules. These function modules are associated with such control information as message types and process codes. So the ALE process checks this control information and derives the name of the function module to invoke for that particular IDOC processing from certain database tables. These function modules contain objects known as customer functions, which can be considered SAP Enhanced user exits. A function module is called at a particular point during the processing of the main program or function module, and it can be used to influence data processing at that point by adding code to the customer function. The customer function behaves like a normal function module and has import and export parameters, tables (internal tables) statement, and exception processing. Unlike a conventional user exit, customer functions give you the ability to modify only data available to you by the function moduleâs parameters and internal tables. While most ALE/EDI function modules are supported by customer functions, there are ALE/EDI processes that still use conventional user exits. There are a few ways to determine which function module to enhance for a given message type/process code:
For master data distribution, from SALE go to Extensions -> Master data distribution -> Setup additional data for message types. Search for message type DEBMAS in this example. You see an entry for DEBMAS associated with function module MASTERIDOC_CREATE_SMD_DEBMAS. This data is stored on table TBDME. The function module names for all master data message types follow this pattern: MASTERIDOC_CREATE_SMD_messagetype. This function module calls another function module of name MASTERIDOC_CREATE_DEBMAS or MASTERIDOC_CREATE_messagetype. Search for the words customer function, and you find several hits that can be used to add code to the function module.
From WEDI got to Control -> Inbound process codes -> Inbound with ALE service -> Processing by function module (transaction WE42), or from WEDI go to Control -> Outbound process codes -> Outbound with ALE service -> With function module (transaction WE41). There will be function modules associated with the process codes. For inbound, the function modules usually follow this pattern: IDOC_INPUT_messagetype: for example, IDOC_INPUT_CHRMAS for inbound characteristics master.
Use transaction WE57 or from WEDI go to Development -> Message/Application Object. The entries list the function module, Business Object, message type, and IDOC type that are used for inbound ALE/EDI interfaces.
Customer functions are not specific only to ALE and EDI but also to all programs/modules in SAP R/3. Customer function is a SAP enhancement component; the other two types are menu and screen enhancements.
All customer function exits are maintained in SAP enhancements and are found by using transaction SMOD. After executing transaction SMOD, pull down (F4) on the enhancement name field, and execute again. This provides you with a list of all SAP enhancements available. SAP enhancements are grouped by development class pertaining to an application area. Choose Application development R/3 SD master data distribution for development class VSV to lead to a screen that lists VSV00001 as an enhancement (see Figure 5). Press Component +/- to display its function exit components. There are four possible components listed, all of which are function exits (and are function modules) that are called from the ALE function modules in the form Call Customer Function Î001â. This is a special occurrence of the ABAP statement Call. Go to item Exit_SAPLVV01_ 001, which you need to enhance for the Customer Master outbound example of an IDOC extension. In the ALE-function module MASTERIDOC_CREATE_DEBMAS, the statement CALL Customer Function 001 is translated in the background to call component EXIT_SAPLVV01_001. Although this function exit can be edited using transaction SE37, you will use a simpler approach.
When you use SAP enhancements and their components, you manage them with an SAP object known as a project, which is like an envelope containing the selected enhancements and their components. A project can be used to control the execution of components and to transport them to other clients and instances in SAP. Basically, the process involves creating a project, including enhancements and components that are to be enhanced, editing the components, and then activating the project. The following process creates a project for our example Customer Master IDOC extension:
Execute transaction CMOD.
Enter name of project, say CSTMAST1.
Click on Create.
Enter a description of the project.
Save.
Click on SAP Enhancements.
Enter VSV00001 for Enhancement.
Save.
Once youâve created the project, edit the function exit components and activate the project. Remember that the code in the function exit enhancement will execute only if the project is activated. In fact, this is a convenient SAP enhancements feature, whereby the work in progress (developing code in the customer function) will not affect users of that application. When the code is completed, the project can be activated so the enhanced functionality takes effect. It can also be deactivated for maintenance.
As mentioned earlier, customer functions (function exits) are embedded in ALE function modules and can be used to influence the creation and modification of IDOC data on an outbound application or to post additional or modified IDOC data to an inbound R/3 application. Function exits are similar to regular function modules, with import/export parameters, tables (internal tables), and exceptions.
The two important factors to consider while developing the customer function are:
1. The point in the ALE function module where the function exit occurs
2. The data made available by the customer function that can be modified or posted to the R/3 application, based on the direction.
Because some function modules have several customer functions, it is critical to choose the function exit best suited for that particular enhancement. Do not attempt to perform activities that the function exit is not designed for. The importance of this point is illustrated by the following description of enhancing function modules for outbound and inbound ALE interfaces.
Outbound interfaces. In an outbound ALE interface you use function exits (customer functions) to populate additional segments created by an IDOC extension or to modify the existing IDOC data segments as per business requirements. Previously, you identified that enhancement VSV00001 has a component EXIT_SAPLVV01_001 (function exit), which can be used for populating the additional data segment Z1SADRX that you created in the IDOC extension ZDEBMASX (IDOC type ZDEBMASZ, based on Basic IDOC type DEBMAS02). You also learned that the ALE function module that calls this function exit is MASTERIDOC_CREATE_DEBMAS, which has a statement Call Customer Function 001.
Browse the function module MASTERIDOC_CREATE_DEBMAS using transaction SE37. You will find that this customer function is invoked for every segment of IDOC type DEBMAS02. In fact, the function exit is called soon after the creation of an existing segment has been populated with data and appended to the IDOC data table (internal table). Also, the function exit is exporting the message type, IDOC type, and the segment name and is importing the IDOC extension type. It is also passing the IDOC data internal table. This indicates that the ALE function module is allowing you to populate additional segments for every existing segment and modify the existing segmentâs data.
Letâs write ABAP/4 code to accomplish the task of populating IDOC segment Z1SADRX with a contact personâs business address:
From SE37, display function module MASTERIDOC_CREATE_ DEBMAS.
Find Customer Function 001.
Double-click on 001.
The function EXIT_SAPLVV01_001 will be displayed.
Double-click on INCLUDE ZXVSVU01.
You will be asked to create a new include object. Proceed as desired.
Enter code (as in Listing 1).
Be sure to perform a main program check (Function Module -> Check -> main program) and extended program check (Function module -> Check -> Extended check).
Now that you have extended the IDOC and enhanced the ALE function module based on the requirements for the contact personâs business address on the Customer Master, letâs test the interface. You should create a logical system and define a port for this interface. You should also configure the Customer Distribution Model to indicate that message type DEBMAS is being distributed to this logical system. The only difference in configuration between a regular outbound ALE interface and an enhanced one is the partner profile definition. While maintaining the outbound parameters of the partner profile, make sure the IDOC type is ZDEBMASZ. The fields for Basic IDOC type and extension type are automatically populated with DEBMAS02 and ZDEBMASX, respectively.
To maintain the contact personâs business address of a customer:
Use transaction BD12 or from BALE go to Master Data ->Customer -> Send and send that Customer Master record by executing the transaction after filling in the relevant fields such as customer number, message type, and logical system.
Use transaction WE02 or WE05 to verify the IDOC created. You should see the new segment Z1SADRX populated with the correct data.
With SAP releases below 4.5B, you cannot capture changes to business address through change pointers because a change document object is not available for capturing business address changes, and also earlier releases have not been configured to write change documents for a contact personâs business address. If you would like this functionality, you can either create change document objects, generate function modules to create change documents, and perform ALE configuration to tie it in, or make a cosmetic change to the contact person screen data while changing the contact personâs business address so that it gets captured as a change to the Customer Master. Subsequently, the ALE enhancement that you performed captures the contact personâs business address.
Inbound interfaces. The process for enhancing inbound ALE interfaces is similar for outbound, with a few exceptions; specifically in the coding of customer functions (function exits) for the ALE/EDI function modules.
The first step is to create an IDOC extension for the specific Basic IDOC type by adding new segments at the appropriate hierarchy level: that is, associated to the relevant existing segment. Populate the data fields on the new segments with application data by the translator or external system/program before importing them into the R/3 System. Then, find the ALE function module that is invoked by the inbound processing. By browsing through the code or reading the documentation on the function exit enhancements using the SMOD transaction, identify the function exit in which you should place your code. The technique used in the code to post the additional or modified IDOC data to the application can vary based on the application rules and requirements, the data available at that point in processing, and the application function modules available to update the application tables. It is important to search first for application modules that process the data and see if they can be called within the function exit. If the additional data in the extended segments in specific to a custom table or resides in nonkey fields of a single or small set of tables, you may be able to update it directly by SQL statements in the function exit. This approach should be carefully evaluated and is certainly not highly recommended.
Another option is to use Call Transaction from within the function exit to process the additional data. For example, in the case of message type WMMBXY for inbound goods movements from a warehouse management system, the standard interface creates batches for materials, but does not update its characteristics. In such a case, you can use Call Transaction MSC1 to create the batch and assign characteristic values to it from within the function exit provided.
regards,
srinivas

Function Module to Generate Outbound IDOC for Sales Documents

Hello Experts,
Can someone please help me, I need to know which function module to use in order to generate the outbound IDOC for sales documents. Some of the fm's I have come across are the following:
IDOC_OUTPUT_ORDERS, but actually for Purchase Orders
IDOC_OUTPUT_ORDRSP, but did not generate any IDocs for my sample Sales Order.
Points will be given for any help provided.
Thanks in advance.

Hi Nagaraj,
I tried using the IDOC_OUTPUT_ORDERS but I keep getting an error that the Purchase Order <xxx> does not exist, even though the document I tried is a sales order. For everyone's reference here is the code:
form process_data.
DATA v_idoc TYPE edidc-docnum.
DATA i_edidd TYPE TABLE OF edidd.
DATA wa_idoc_ctrl TYPE edidc.
LOOP AT i_nast INTO wa_nast.
 CLEAR i_msgs[].
 CALL FUNCTION 'WFMC_PROTOCOL_GET'
 EXPORTING
 cps_nast = wa_nast
 tables
 messages = i_msgs
 EXCEPTIONS
 NOT_FOUND = 1
 OTHERS = 2.
 LOOP AT i_msgs INTO wa_msgs WHERE arbgb EQ 'E0'.
*--- Check first if there is an IDOC
 IF wa_msgs-msgv1 IS INITIAL.
 CONTINUE.
 ENDIF.
 v_idoc = wa_msgs-msgv1.
 CLEAR i_edidd[].
 CLEAR wa_idoc_ctrl.
 CALL FUNCTION 'IDOC_READ_COMPLETELY'
 EXPORTING
 document_number = v_idoc
 IMPORTING
 IDOC_CONTROL = wa_idoc_ctrl
* NUMBER_OF_DATA_RECORDS =
* NUMBER_OF_STATUS_RECORDS =
 TABLES
* INT_EDIDS =
 INT_EDIDD = i_edidd
 EXCEPTIONS
* DOCUMENT_NOT_EXIST = 1
* DOCUMENT_NUMBER_INVALID = 2
 OTHERS = 3.
 CALL FUNCTION 'IDOC_OUTPUT_ORDERS'
 EXPORTING
 object = wa_nast
 control_record_in = wa_idoc_ctrl
* IMPORTING
* OBJECT_TYPE =
* CONTROL_RECORD_OUT =
 tables
 int_edidd = i_edidd
* EXCEPTIONS
* ERROR_MESSAGE_RECEIVED = 1
* DATA_NOT_RELEVANT_FOR_SENDING = 2
* OTHERS = 3
 IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
 COMMIT WORK.
 ENDLOOP.
ENDLOOP.

How to generate multiple idoc's from single appl document

All,
Iam looking for a way to generate multiple idoc's from single appl document (sales order). Based on the plant details on line items in the sales order i have to generate multiple idocs, i.e., send one idoc to each plant entered in sales order line items. any help will be appreciated.
Thanks

Hi,
You can create a Z-program and call Function Module MASTER_IDOC_DISTRIBUTE.
You can make a call to this FM to send the Idoc as many times as u have plants in your Sales Order.
You can call FM IDOC_OUTPUT_ORDRSP to fill the IDoc structure.
Then u can keep the materials of only that plant for which u want to pass on the information.
Thanks,
Utsah Garg.

How to generate an Idoc form an existing Sales Order?

Hi experts.
Our client needs to generate an ORDERS05 output Idoc for Sales Orders that has already been created.
Is there a way to generate a new Idoc for those Sales Orders?
MASTER_IDOC_DISTRIBUTE won’t do the job cause I don’t how to complete all the segments, I need the standard procedure to be execute.
I thought to use a Bapi to modify the Sales Order, but that might execute routines that we not want to.
Any ideas?
Thanks.

Hi,
You can generate an IDOC from invoice cancellation.Define a new "Z" output type for this cancellation billing document type and select the medium as 5(EDI).Check with your ABAPer for this.
Regards,
Krishna.

Issues in SAP(Idoc)-XI-File scenario

Dear All,
I am working on SAP(Idoc)-XI-File scenario. But in the Receiver agreement i am not able to see the idoc in order to specify some conditions there.
Please suggest if I have to do any settings in order to specify some conditions in the idoc.
Warm Regards,
N.Jain

Hi nishu jain ,
U can specify the conditions in Reciever Determination.
1.Go to Scenarios
2.Choose your business scenario
3.Click Service without party
4.Double click Reciever Determination
5.U wil get screen in which there is a option called Configured Recievers.
6.Click there.then u wil get the screen with
Left Operand Op Right Operand
7.There u can specify the condition.
Reward points if u find this useful.......
Regards,
gyanaraj

F150 Generate SAP idoc

Similar Messages

Maybe you are looking for