F3-F100-010

   Hello all,
   I bought a Satellite P875-S7200 about six months ago, now whenever I am tryin to start it, goes to the black screen giving me the choice of "start Windows normally" or "Launch Startup Repair (recommended), and regardless of the option I select, it seems to load windows partially (active mouse, windows files loaded, etc) and the blue screen with the ERROR : F3-F100-0010 gives me the only option of shutting off the computer just to start over.
  Does anyone has a solution for it? I have googled everywhere and nothing so far, the hard drive is working properly (since I have mouse and load the files), jut the operating system gets stuck at the blue screen...
Thanks a lot in advance,
  FP

Satellite P875-S7200
Can you reach the recovery environment?
   What are the system recovery options in Windows 7?
-Jerry

Similar Messages

  • How to get rid of the Warning Message L3 010 in LT01?

    Hi, guys,
    Is there any approach to get rid of the Warning Message L3 010(Check your entries) in LT01? I'm running a BDC program, but it's always interrupted by this message both in online and background mode...
    Thanks a lot
    Michael

    Maybe you can try FMs instead of BDC to achieve your goal:
    Creating/confirming transfer order (WM) using bapi/function modules
    E.g. L_TO_CREATE_SINGLE, L_TO_CREATE_MULTIPLE,L_TO_CONFIRM (which are mentioned in the thread linked above)
    Regards,
    Csaba

  • Source system BID-010 does not exist

    Hi,
    I have installed BI statistics in BI 7.0 in Dev.While transporting to QA system, I am getting the following error message:
    "Source system BID-010 does not exist"
    Can anyone please help!!
    Thanks,
    Dipti

    Hi Siggi,
    Thanks for your reply.Logical system BID was not there in QA.I have made the required changes.
    I also received an error as " There is no DataSource with these attributes                                              
    Reference to transfer structure 0TCTBWOTYPE_TEXT_HA not available. No activation possible. "
    I checked in table RSTSODS ,transfer struct 0TCTBWOTYPE_TEXT_HA" is active.
    Can you please help..
    Thanks
    Dipti

  • L550/010 USB port not working properly, non-standard USB ports

    I wondering if anyone can shed some light on this strange problem I'm having with my laptop USB ports.
    Background.
    I have a USB device (CED-M2 USB Chronograph). The device comes with Windows 7 software to upload fps readings.
    The CED has a calculator style keyboard - so you can lookup data without the laptop.
    My L550 PSLWSA-01000Q, is running Windows 7 professional.
    Problem.
    When I connect the CED into the USB port the buttons on the CED no longer operate, As soon as the USB lead is disconnected the buttons work. Uploading the data doesn't work either. The buttons freeze occurs as soon as I plug into a powered USB port (even if user not logged into Windows and programs are not running).
    I've installed the upload program onto two PC's at home (Vista Home and Windows 7 Home) and both PC's connect to the CED and upload fine. Furthermore, the CED push buttons works perfectly! So, this leads me to think that the hardware or signals from the laptop USB ports is not standard.
    I've tried all three laptop ports (e-Sata/USB and normal USB ports), same problem.
    Any ideas what could be causing this problem?

    Hi Jerry
    Firstly, thanks for repsonding.
    All L550/010 USB ports appear to work well on other devices (Sierra Wirless card, HP optical mouse, HTC phone), doesn't matter which port (USB, Esata/USB) all works fine with these units.
    I've tried connecting the Chrono via a USB 4 port expander - same problem, no comms, chrono buttons locks up. Connect to Home PC running Vista Home and Windows 7 Home and works fine 9 - just can't take those to the range.
    The Chrono unit is self powered (9V Alkaline) and it's new, so USB supplied 5V is not a problem.
    The buttons seize whenever the laptop is powered up. Also, if the chono unit is powered down, connecting the USB lead to the laptop turns it on (wakes up). This wake up functions on both home desktop PC's and laptop (good), however, with the laptop I can't power down the Chrono as the buttons don't work.
    Whilst laptop connected, and rebooting the Laptop, the Chrono buttons will work just before the Press F2 for setup screen comes up - so could it be electrical.
    I've downloaded the latest BIOS from Toshiba and Intel chipset too - no change.
    I got the unit to connect once tonight - when I plugged my mouse in at the same time - USB configured for mouse, and whilst doing that the Chrono worked. Once mouse working, Chrono stopped. Can't repeat results.

  • How can I get my '010 Macbook Pro to use the entire HDTV screen?

    I have both my late '09 MacMini and mid-'010 Macbook Pro connected to my HDTV with HDMI cables.
    The Displays pane of System Preferences on the Macmini gives me the options of 1080p and 60 hZ, which use all of the HDTV screen.
    However, on the Macbook Pro I only get resolution options.
    The HDTV (Sharp Aquos 46") gives me only Stretch, SuperStretch, Dot-by-Dot, and Zoom options. I use Dot-by-Dot because
    the others, while the use all of the HDTV's horizontal space, cut off either the top of the display (Title Bar), the bottom (Dock), or both.
    Is there any way for the Macbook Pro to use all the HDTV's "real estate" like the MacMini does?

    If your MBP can use it, I highly recommend the following adapter:
    http://store.apple.com/us/product/H1824ZM/A/Moshi_Mini_DisplayPort_to_HDMI_Adapt er
    I'd be very surprised if it doesn't have a capable mini DisplayPort, since my not-quite-one-year-old MBP does.  But to be sure, first make sure you've got a mini DisplayPort, then scroll down on the page above and find a user comment titled "How you know if it is supported w/o guessing."

  • Where is the update for E66 to 410.21.010

    Hi, for severel days I saw the Update for my E66 from 300.21.012 to 410.21.010 on "can I Update". Today I will update, but now the Updater says there where no update. Then I checked on "can I update" again I look very supriesed, It show me a very very old Version 110.07.126. Is the update Database corrupt?
    E66fan

    That database is never really very reliable to begin with for some weird reason. However you could try also checking via FOTA (dial *#0000#) on your phone and select options>check for updates as not all updates are released via NSU. That procedure would cost mobile internet charges though.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • ALC-PDG-001-000-ALC-PDG-010-015-The conversion operation timed out before it could be completed. Please report this error to the system administrator.

    I am getting the error when trying to convert a word file to pdf.
    My Adobe Lifecycle ES is  installed on 2GM RAM . Is this the issue for the below error.
    ALC-PDG-001-000-ALC-PDG-010-015-The conversion operation timed out before it could be completed. Please report this error to the system administrator.
    Please provide me a valuable solution. I am new to Adobe ls es.

    This is a forum for Acrobat desktop product. For LiveCycle, try this forum
    http://forums.adobe.com/community/livecycle/livecycle_es/pdf_generator_es

  • Posting date/period 31.12.2014/009 is earlier than existing date/period 17.01.2015/010

    Hi Experts
    While posting of invoice document (T.Code MIRO) I got the below error message;
    Posting date/period 31.12.2014/009 is earlier than existing date/period 17.01.2015/010
    Message no. FI_E050
    Diagnosis
    Commitment postings to Funds Management require that the current transaction's posting date is earlier than the posting date of the original or change account assignment line item of the document.
    I have checked several threads still i am not able to get answer -Invoice posting Error
    Regards
    Sp

    Suraj,
    please check following note
    564439 - FM update date is earlier than an existing postings
    Regards

  • Item 010 Fund Center/Commit Payment Budget Exceeded (FM)

    Hi Expertise,
    Our user executing FMJ2 transaction to carry forward purchase requisition (PR) / Purchase Order (PO) from 2014 to 2015 (April to March) by that time getting the below error message, but budgets are available for 2015.
    Item 010 Fund Center/Commit Payment Budget Exceeded
    Another user also facing the similar issue while create new PR in the current FY-2015 with different commitment item & fund center, still getting the same error, but budgets are available for 2015.
    Kindly share your views and ideas, its urgent.
    Thanks,
    Jammy

    Hi Jammy,
    Please check the following hints about this matter:
    1) To be on the safe side, please run report RFFMRC04 in test mode, to see if there are differences between the line items and totals table.
    If errors arise, please run it in update mode, whithout other budgeting/posting activities occurring at the same time (otherwise you may encounter differences). Then, please reconstruct the AVC totals (FMBV for Former budgeting, FMAVCREINIT for BCS).
    2) Reassignment during fiscal year change also uses the Derivation strategy for reassignment (transaction FMYC). Please verify if you have defined in FMYC a different FM account assignment (funds center and commitmente item) than the one that you are expecting.
    I am not sure if you have Former Budgeting or BCS, therefore consider also the following:
    3) IF you are using Former Budgeting, I guess you are getting BP629. Please check report BPINDAN2_NEW and  if the 'Assigned budget' is same as the 'Commitments/actuals' the values are ok and budget is missing. If the values are different, you must run report BPINDX03 (FMBV) first to correct it.
    4) IF you are using BCS, I guess you are getting FMAVC* message. For this, use transaction FMAVCR01 to verify your budget consumption and make sure that the budget was updated for payment budget not commitment budget (as per the error message that you are receiving).
    5) Please check how this UOM (unit of measure) is defined in transaction CUNI.
    In this transaction, you can set the Value-based commitment indicator.
    This indicator controls whether commitments for the chosen unit of measure are
    recorded on a quantity basis or a value basis. If the indicator is not set, the
    commitments are managed on a quantity basis. If you set the indicator they are
    managed on a value basis.
    For value-based updates, the reduction of purchase order commitments occurs
    with the maximum of goods receipt and/or invoice value. For
    quantity-based commitments, the reduction of purchase order commitments occurs
    with the maximum of goods receipt and/or invoice quantity.
    Example:
    You create a purchase order with the quantity of 1000 at the price of 10.
    You post a goods receipt related to this PO with the quantity of 500 at the
    price of 9.
    For value-based updates, an amount of 4,500 is updated.
    For quantity-based updates, an amount of  5,000 is updated.
    I hope this helps.
    Regards, Vanessa.

  • System/Ibase for DQ0 to be added in Solution Manager SM0-010

    Hi,
    Question: System/Ibase for DQ0 to be added in Solution Manager SM0-010
    Please let me know the process how can do this. I will really appreciate.
    Regards, Nabi.

    Hi Nabi,
    if it is an ABAP based application, check in transaction IB52, if it has been already automatically created there. If yes, you might only need to go to transaction dswp (solution_manager) and go to the menu select edit and in the drop down menu you should have 'Initial Data Transfer for IBase´.
    If it is not there, you need first to check:
    - RFC connections maintained for DCQ in SMSY
    - Logical Component created in SMSY for DCQ
    - Assignment to Logical Components in SMSY for DCQ
    - DCQ added to the Solution SMSY
    Then check again in IB52. IB51 is used for creating the entries manually.
    If the entries are now in IB52, you need to execute the "Initial Data Transfer for IBase" again.
    I hope this helps.
    Regards,
    Markus

  • Last posting run terminated (Restart in period 2011 010) _ Depre posting

    Hi
    I am trying post depreciation for the month of October 2011 for an asset.
    I am getting the following error:
    Last posting run terminated (Restart in period 2011 010)
    Message no. AA730
    Diagnosis
    The last posting run in period 010 2011 was terminated by an error. Before any more posting runs are performed, you must restart the posting run for period 010 2011.
    Procedure
    Start the posting run for period 010 2011 again using the restart parameter.
    I checked OB52 and the settings look ok.
    Any idea what might be the reason for the error?
    Thank you in advance
    Regards
    Vedavatee

    i checked in TABA
    and found:
    Client         Co Code    Fiscal year     Posted up to  No. of posting runs FROM Doc.No.     To doc.no.     Document posted
    123     ABCD     2011     008     01          0000000001     0000000001              N
    123     ABCD     2011     009     01          0000000001     0000000001              N
    123     ABCD     2011     009     02          0000000001     0000000001              N
    123     ABCD     2011     009     03          0000000001     0000000001              N
    123     ABCD     2011     010     01          0000000001     0000000001              1

  • Satellite A665 SP6004M Error:f3-f100-003

    Hi.
    Last Sunday I tried to upgrade the Nvidia driver for the GeForce GT330M that is in my laptop. As the progress bar goes on I barely move the laptop probably drag it half an inch over the table, after that the HDD Protection pop-up window came on and the laptop hang for 10-15 minutes; the Nvidia driver installation hang and the system became unresponsive, after this the installation conclude and restart my system, when windows log off and shut down last thing I saw was a brief BSOD.
    When restart, the laptop look for external media to boot up because it can't found any HDD, so turn off and on the laptop again, and when the boot process starting appear a message who say Insert Windows CD to repair the system. So I went for the Recovery CD who came along with the laptop when new. Inserted the disc and change the boot order in the F12 menu, when the System recovery was starting a new window appear saying Error:f3-f100-003. And from there, the HDD was unable to read or sometimes the Bios doesn't even recognize him.
    Yesterday bought a new HDD, one of these _http://storage.toshiba.com/storagesolutions/pc-notebook/mkxx76gsx-series _ and made a new clean install of Windows, which was fast and problem free, installed the respective drivers and everything was fine.
    But today, when I restart the system, the error came again, after that I was able to start windows normally next time. So I think that is something wrong with other component, maybe the Bios, or even worse, the mainboard. I'm afraid of continue using the laptop because probably break the new HDD again. What can I do? Downgrade bios?
    Thanks in advance.

    Here's your latest BIOS.
    ACPI Flash BIOS version 2.30 for Satellite A660/A665 (PSAW0U/PSAW3U)(v2.30; 01-12-2012; 6.77M)
    However, it could be a failed component. You might want to have it serviced.
    - Peter

  • WatchFolder PDF Generator throws error:  ALC-PDG-010-012-PDFMaker ...

    When setting up the WatchFolder after initial TURNKEY install, I am receiving the following error: 
    ALC-PDG-010-012-PDFMaker reported an error while printing the document in the failure.log file  (full text of error below).
    This is, of course, after working thru other errors, but have been unable to get past this one.  According to the LiveCycle AdminUI About page I have LiveCycle PDF Generator ES v8.2.1 loaded.  Again, I used the TURNKEY install, have Acrobat 9 Pro Extended installed on the same server along with MicroSoft Office v2007.  I looked at the other posts involving this error message, but didn't see where a resolution has been given nor did any of the information lead me to a fix.  I tried doing a simple MS Word document conversion from the adminui, the same error, ALC-PDG-010-012-PDFMaker reported an error while printing the document came up.  I have been able to open a WORD doc on the server and print using the Adobe PDF printer and that worked just fine.  Any help given will be much appreciated!
    Failure Time----Wed Sep 09 12:20:15 EDT 2009
    source location ---- Reason of failure is-----Invocation error.
    Invocation error.
    ALC-PDG-010-012-PDFMaker reported an error while printing the document.
    ALC-DSC-003-000: com.adobe.idp.dsc.DSCInvocationException: Invocation error.
    at com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke(DefaultPOJOInvokerImpl.jav a:152)
    at com.adobe.idp.dsc.interceptor.impl.InvocationInterceptor.intercept(InvocationInterceptor. java:140)
    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor$1.doInTransaction(Transa ctionInterceptor.java:74)
    at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterBean.doBMT(EjbTran sactionBMTAdapterBean.java:197)
    at sun.reflect.GeneratedMethodAccessor347.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at org.jboss.invocation.Invocation.performCall(Invocation.java:345)
    at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionConta iner.java:214)
    at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionI nterceptor.java:149)
    at org.jboss.webservice.server.ServiceEndpointInterceptor.invoke(ServiceEndpointInterceptor. java:54)
    at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:48)
    at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:106)
    at org.jboss.ejb.plugins.AbstractTxInterceptorBMT.invokeNext(AbstractTxInterceptorBMT.java:1 58)
    at org.jboss.ejb.plugins.TxInterceptorBMT.invoke(TxInterceptorBMT.java:62)
    at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstance Interceptor.java:154)
    at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:153)
    at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:192)
    at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor. java:122)
    at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:624)
    at org.jboss.ejb.Container.invoke(Container.java:873)
    at org.jboss.ejb.plugins.local.BaseLocalProxyFactory.invoke(BaseLocalProxyFactory.java:415)
    at org.jboss.ejb.plugins.local.StatelessSessionProxy.invoke(StatelessSessionProxy.java:88)
    at $Proxy160.doBMT(Unknown Source)
    at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute(EjbTransactionProvi der.java:95)
    at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor.intercept(TransactionInt erceptor.java:72)
    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    at com.adobe.idp.dsc.interceptor.impl.InvocationStrategyInterceptor.intercept(InvocationStra tegyInterceptor.java:55)
    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    at com.adobe.idp.dsc.interceptor.impl.InvalidStateInterceptor.intercept(InvalidStateIntercep tor.java:37)
    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    at com.adobe.idp.dsc.interceptor.impl.AuthorizationInterceptor.intercept(AuthorizationInterc eptor.java:132)
    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    at com.adobe.idp.dsc.interceptor.impl.JMXInterceptor.intercept(JMXInterceptor.java:48)
    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    at com.adobe.idp.dsc.engine.impl.ServiceEngineImpl.invoke(ServiceEngineImpl.java:115)
    at com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:118)
    at com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.routeMessage(AbstractMessage Receiver.java:91)
    at com.adobe.idp.dsc.provider.impl.vm.VMMessageDispatcher.doSend(VMMessageDispatcher.java:21 5)
    at com.adobe.idp.dsc.provider.impl.base.AbstractMessageDispatcher.send(AbstractMessageDispat cher.java:57)
    at com.adobe.idp.dsc.clientsdk.ServiceClient.invoke(ServiceClient.java:208)
    at com.adobe.idp.jobmanager.ejb.JobManagerBean.doOnMessage(JobManagerBean.java:1104)
    at com.adobe.idp.jobmanager.ejb.JobManagerBean.onMessage(JobManagerBean.java:952)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at org.jboss.invocation.Invocation.performCall(Invocation.java:345)
    at org.jboss.ejb.MessageDrivenContainer$ContainerInterceptor.invoke(MessageDrivenContainer.j ava:475)
    at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionI nterceptor.java:149)
    at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:48)
    at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:106)
    at org.jboss.ejb.plugins.AbstractTxInterceptorBMT.invokeNext(AbstractTxInterceptorBMT.java:1 58)
    at org.jboss.ejb.plugins.MessageDrivenTxInterceptorBMT.invoke(MessageDrivenTxInterceptorBMT. java:32)
    at org.jboss.ejb.plugins.MessageDrivenInstanceInterceptor.invoke(MessageDrivenInstanceInterc eptor.java:101)
    at org.jboss.ejb.plugins.RunAsSecurityInterceptor.invoke(RunAsSecurityInterceptor.java:94)
    at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:192)
    at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor. java:122)
    at org.jboss.ejb.MessageDrivenContainer.internalInvoke(MessageDrivenContainer.java:389)
    at org.jboss.ejb.Container.invoke(Container.java:873)
    at org.jboss.ejb.plugins.jms.JMSContainerInvoker.invoke(JMSContainerInvoker.java:1077)
    at org.jboss.ejb.plugins.jms.JMSContainerInvoker$MessageListenerImpl.onMessage(JMSContainerI nvoker.java:1379)
    at org.jboss.jms.asf.StdServerSession.onMessage(StdServerSession.java:256)
    at org.jboss.mq.SpyMessageConsumer.sessionConsumerProcessMessage(SpyMessageConsumer.java:904 )
    at org.jboss.mq.SpyMessageConsumer.addMessage(SpyMessageConsumer.java:160)
    at org.jboss.mq.SpySession.run(SpySession.java:333)
    at org.jboss.jms.asf.StdServerSession.run(StdServerSession.java:180)
    at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:748)
    at java.lang.Thread.run(Thread.java:595)
    Caused by: ALC-PDG-10012-000: com.adobe.livecycle.generatepdf.client.ConversionException: ALC-PDG-010-012-PDFMaker reported an error while printing the document.
    at com.adobe.pdfg.BMCCaller.checkResult(BMCCaller.java:358)
    at com.adobe.pdfg.Native2PdfCaller.callNativeBMC(Native2PdfCaller.java:788)
    at com.adobe.pdfg.Native2PdfCaller.createPDF(Native2PdfCaller.java:298)
    at com.adobe.pdfg.GeneratePDFImpl.createPDFCommon(GeneratePDFImpl.java:342)
    at com.adobe.pdfg.GeneratePDFImpl.createPDF(GeneratePDFImpl.java:172)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke(DefaultPOJOInvokerImpl.jav a:118)
    ... 69 more

    The resolution to this error was simply to go to the windows add/remove programs, remove the current install of MS Office, then reinstall insuring I was logged in with the same ID as the ID that installed the LiveCycle and Adobe Pro 9.  Rebooted server after the installs and then everything worked.  Has continued to work all week.

  • Listener response to a TNS ping is 2,010 msecs

    Host=hostname
    Target type=Listener
    Target name=[ https://0058-WIN-S51.cis.ccsd.net:7800/em/redirect?pageType=TARGET_HOMEPAGE&targetName=LISTENER_SCAN1&targetType=oracle_listener ]LISTENER_SCAN1_ora-sx-rac
    Message=]Listener response to a TNS ping is 2,010 msecs
    Severity=Critical
    Oem 12c keeps give this alert all day.
    4 node RAC 11.2.3.0.5 version
    solaris OS.
    why it's causing tnsping 2010????

    From the Metric Reference Manual
    http://docs.oracle.com/cd/E24628_01/em.121/e25160/oracle_listener.htm#CCHCCDHJ
    Response Time (msec)
    This metric represents the time (in milliseconds) that it takes for the Listener to respond to a network request (ping).
    By default, this metric has a critical threshold of 100 and a warning threshold of 80. A critical alert is generated when the metric value exceeds the critical threshold value 1 time. A warning alert is generated when the metric value exceeds the warning threshold value 1 time. You can edit the value for a threshold as required.
    By default, Enterprise Manager tests the value of this metric every 24 hours.
    When an alert is generated, the alert text is:
    Listener response to a TNS ping is %value% msecs
    Data Source
    The value of this metric is derived using the TNSPING command.
    2010 ms is abnormally high. May be there is some issue wiith your netowrk.

  • Nokia E5 Light sensor bugs/problems SW: v042.010 (...

    Hello nokia support! I have buy my new Nokia E5 in Germany VODAFONE.DE and, I just wont report about, bug wich ligt sensor in firmware  v042.010.RM-612 Please See my recorded video on youtube VIDEO i hope that you fix this bug wich new firmware version as son as possable!
    please sorry for my english, my language is russian...
    Best greats your Nokia user

    Nokia E5 has many bugs, im an experienced Nokia and Symbian user, i feel sorry that nokia doesnt car about even answering or at least get us an firmware update. I still buiyng nokia phones even if i know that android phones is much better, cause im still want to give nokia my support..but im really tired of it and im making the switch today.... the list of bugs that noki e5 have is enormous and theese bugs are really serious bugs since the functionality of the phone is almost completely useless if your into buisness..
    Nokia .... sucks even at this....not answering and follow up the support.... not updating their firmwares in time....
    Nokia is a singking boat....!!! THATS THE TRUTH !!!

Maybe you are looking for