How do you create custom validation rule in WS 9.2?!?!?!

Hello,
I am using Workshop 9.2. I created a page flow, and want to do some form validations.
I saw the simple 9.2 example, but it is only good for very basic validation, what if you have to validate the form field against a database, must you write a custom validation rule? HOW would you do this in 9.2 so that will still stay with the workshop/netui paradigm?
http://beehive.apache.org/docs/1.0.1/netui/validation.html
Keith

Hi Keith,
Staying within the declarative validation framework the answer is probably that you do need to write a custom validation rule and refer to it using the @Jpf.ValidateCustomRule annotation.
The NetUI Annotation Reference shows how the Struts validations are supported via the framework.
http://beehive.apache.org/docs/1.0.1/netui/annotations/pageflow_annotations.html
Specifically, if you look through the @Jpf.Validate* annotations, while most of these are "canned" common validations, there are a few that are more open-ended, such as @Jpf.ValidateMask and @Jpf.ValidateValidWhen.
Those two let you write the validation logic in the annotation while @Jpf.ValidateCustomeRule only refers to a custom rule in the struts validator file.
In any case, there is a validation rule editor which should help in authoring and managing the annotations. In the Page Flow Explorer or Page Flow Editor just right click on the action or form bean bean of interest and choose Validation Rules and the appropriate scope.
I hope that's of some use,
Troy

Similar Messages

  • How do you create a new rule in CC?

    Help! Missing the CSS style panel. How do I create a new rule in CC?

    photodiva wrote:
    Help! Missing the CSS style panel. How do I create a new rule in CC?
    If css style panel is missing then you can reset your designer.  In CS6 the process was:
    Windows >> Workspace Layout >> Reset Designer
    See this picture:
    Now to create a new style should be easy.  Just see this picture:
    I don't use CC so I don't know if the process is still the same.
    Good luck.

  • How do you create a css rule?

    How do you create a new CSS rule in Dreamweaver?
    I took the Dreamweaver class 3-4 years ago, and now have to design a website. I cannot figure out how to create a css rule. The instructions Adobe gives do not make sense. Under format>>CSS Styles, there is no "new" option like the instructions say there should be.
    I cannot figure out how to do it using the CSS properties pane either.
    Every method they give does not jive with the options in the program.
    I did create a style sheet for my site.

    Which version of the software are you using?
    The tutorials are version-centric now owing to the many "improvements" DW has seen to its interface in the past 12-24 months.  So if you're reading a tutorial for an earlier version than what you have, you'll be confused.  And vice versa if you use a modern tutorial with an older version.
    I prefer to work directly with the code.  It's infinitely faster than the cumbersome panels.  Also the code hinting features in DW are very helpful.
    Nancy O.

  • How to create a validation rule in SAP BODS Job

    Hi Experts
    I have created a BODS Job and in that job i have to create a validation rule as if the cust_id is null the loading must stop.
    I dont have idea where i have to define this validation rule in the Job and how to stop the load job if the validation rule file.
    My Job was defined like below image
    Please guide me where i have to define the validation rule and how to stop the load job.
    Thanks in advance
    PrasannaKumar

    Hi samatha b
    Thanks for your response. I have done as you said and now i can rise the exception.
    I have another requirement as per the validation transformation the data will load into Pass table and Fail table after job execution. If any data entered into fail table i have delete the data loaded into Pass table.
    Here i am facing problem as my target tables are MySQL tables and when i am writing scripts i wrote the script as
    sql('database','delete from <tablename>');
    but as it is an SQL Query execution it is rising exception for the query.
    How can i delete the data loaded into MySQL Target table using scripts.
    Please guide me for this error also
    Thanks in Advance
    PrasannaKumar

  • How do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the onli

    how do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the online photoshop, and I really want to create my own customized url and post photos to my gallery and share them with the world, family, and friends, but i need help because i can't figure how to do any of this, would really appreciate feedback and assistance, thanks, - claire conlon

    To add to sig's reply, "calibrating" does not calibrate Lithiu-Ion batteries, it calibrates the charge reporting circuitry.  If you look at the effect of deep discharging Lithium-Ion batteries in the data from the independent test group, Battery University, you will see that doing so shortens the life of the battery significantly. It looks like an optimum balance between use and life is at a discharge level of 50%.

  • How do you create a custom Photograph folder

    If you have a webcam configured to PhotoBooth then you have a 'PhotoBooth' folder which is in the file system (under the current users 'Pictures' folder) and is visible in iMovie.
    Now if I create a folder on the same level as the 'PhotoBooth' folder (ie again under the active users Pictures folder) then iMovie cannot see it but if I create a folder within the 'PhotoBooth' folder then iMovie can see it... I hope this makes sense.
    So my question is, how do you create a folder in the file system which is visible from iMovie? or how do you add custom folders to the Photographs window in iMovie?
    Sadie.

    If you have a webcam configured to PhotoBooth then you have a 'PhotoBooth' folder which is in the file system (under the current users 'Pictures' folder) and is visible in iMovie.
    Now if I create a folder on the same level as the 'PhotoBooth' folder (ie again under the active users Pictures folder) then iMovie cannot see it but if I create a folder within the 'PhotoBooth' folder then iMovie can see it... I hope this makes sense.
    So my question is, how do you create a folder in the file system which is visible from iMovie? or how do you add custom folders to the Photographs window in iMovie?
    Sadie.

  • Custom validation rules

    Using adf/bc with jdev 10.1.3.3. I've created a custom validation rule class according to the instructions in the adf guide. In that class, I've defined just one property, along with its getters/setters. I've registered my rule in the business component project and associated the rule to an entity attribute via the entity object editor. My problem is that I don't see any way for me to set the property/value of the property that's defined in the validation rule class. For example, in the SRDemo app, in the entity editor for ServiceRequest, if you highlight Validation in the left pane then select the AttributeMustExistInViewRowRule for the Status attribute and click the Edit button, you can set various property values that have been defined in the validation rule class. These values appear to then be updated to that entity's xml file. When I'm in my entity object editor and i've assigned a validation rule to an attribute, I can type in the error message text in the Edit Validation Rule dialog, but it says there are no properties to edit! I guess I haven't wired something together quite right? Note, I have not created the customizer and bean info classes for the design time aspect of this stuff. I assume that you do not absolutely need these classes to create and work with a customr validation rule? Anyone know what I'm doing wrong?

    ok, i figured out the problem. The property/value fields in the Edit Validation Rule dialog will not appear until you've actually compiled the custom validation rule class. I had tried to create the validation rule class, register it with the bc project, and assign it to an entity attribute all without first compiling the class. I stumbled upon this 'fix' in jdev's help, which leads me to another question. For the help topic entitled Creating Custom Declarative Validation Rules for Oracle ADF Business Components, the instructions have you create a class that implements JbiValidator and provide implementation for the method vetoableChange, from which you typically call validateValue. The adf guide's example has the custom validation rule class that extends AbstractValidator and implements JboValidatorInterface. In this example, you provide implementation for the validate method. What's the difference between these two approaches and when should I use one over the other? Thanks.

  • How do you create an installer/bundle for PPro with extension, a plugin (export-controller) and some

    Hi
    As my topic says
    How do you create an installer/bundle for PPro with extension, a plugin (export-controller) and some custom presets?
    Assume you have Flash Builder 4.5, CS Extension builder 2.0, Xcode 4.5.1 running under MacOS 10.8.

    I understand why you need updated running headers in your book. To a sighted reader these serve as a guide to where you are and help you find things quickly.  In addition, if you are exporting your data to XML or HTML from the tagged PDF it would also be important to have these in the proper location. 
    But for accessibility purposes, it doesn't have to be there because the screen reader reads everything in linear order, line by line.  No one is looking at the page.  A user listening to the screen reader read the page is going to hear this heading, just before the actual word itself. So they will hear the first word on the page twice.  It's not the end of the world if it's there, but such headings are not necessary for accessibility unless they are not repetitive and contain information that is not otherwise available.
    So I would say, fine if you need them or want them there, it's just one word. 
    I think you should try exporting your book to PDF (or even just a chapter of the book) and look at the tags panel in Acrobat to see if you are getting the result you want.  I can't tell you exactly what you should do to get those results, you are using a plug-in I don't have. 
    I can tell you I didn't have to add the headers to any article at all, they just automatically export if the other articles in the file are added and you don't select the header style option "not for export as XML."
    You may not experience the same results with your plug-in, but I think it will probably work the same way. 
    Give it a try and best of luck.

  • How do you set up nested rules for iTunes smart playlist

    How do you set up nested rules for a iTune smart playlist

    Hello \"alice\",
    It sounds like you want to add additional criteria to your Smart Playlists.  I found an article with steps you can use to refine your Smart Playlist.  Step 2 specifically has what I think you are looking for:
    2. To have iTunes add songs that match specific criteria, make sure to select "Match the following rule," then make your selections from the pop-up menus.
    For example, you might want iTunes to only add songs that are by a particular artist, or songs with at least a four-star rating.
    To add additional matching criteria, click the Add button.
    You can find the full article here:
    iTunes: How to create a Smart Playlist
    http://support.apple.com/kb/ht1801
    The article says it is archived.  In the current version of iTunes, in step 1 you will select File>New>Smart Playlist.  Also, if you need to edit an existing Smart Playlist, you can right click (or hold command while you click) on it and select Edit Smart Playlist. 
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Creating SSIS validation rules

    Hi All
    I'm pretty new to SSIS and was wondering if anybody could help me?
    I need to create a validation rule which needs to compare dates from two tables in an SSIS package. The rule I need to achieve is as follows
    1.If the dates match (This is the first agreement)
    2.If the dates don't match (This is a duplicate record(Update state field in table B))
    Pretty sure that I am going to need 2 OLE DB Sources and then Merge the two data sets together. I then think that I will need to Sort the data but not sure how i implement the rules that need
    to be established during the sort? Lastly I need to output the results and update the field status
    Hope someone can help
    Thanks in advance

    Hi,
      If both the tables belongs to the same database , consider writing the SQL statement with LEFT JOIN and check for NULL values if match or not.
    Best Regards Sorna

  • How do you create a rolling title that ends on a still image of the title?

    How do you create a rolling title that ends on a still image of the title?

    Here's the help page that describes using the tab stops:
    http://help.adobe.com/en_US/PremierePro/4.0/WS35CA53B6-EAFF-499a-A600-DCD85686354Da.html
    Let me know if that's clear as mud and I'll try to shed more light on the subject.
    One thing that isn't specified/clarified/whatever (and was the biggest stumbling block for me when I first tried this in PPro 1.5) is that the ruler for the tab stops is zeroed at the edge of the text box, and tab stops ONLY work in text boxes (or "text area," however you please). At any rate, you have to position that ruler so that the zero point is at the left edge of your text box, and then the rest of the instructions in the help doc will make sense.
    Also, it's useful to show the tab markers while you work. Just go "Title > View > Tab Markers" and you're good.
    Hope this helps!
    As a side, I have found that this one feature is really the best and most useful part of the PPro titler (and also, just about the only function in the titler that WON'T cause your system to crash on a regular basis).

  • How do you create a seach box in MUSE?

    how do you create a seach box in MUSE? - viewer enters a keyword and will be lead to correct product

    Hi there - For questions about individual programs, you're better off posting in their specific forums. Here's the Muse forum: http://forums.adobe.com/community/muse/general_questions_about_adobe_muse
    That being said, there is currently not a search bar widget that can be added to a site directly from within Muse. However, you can add custom HTML code to your page, with a method such as this: http://www.ehow.com/how_6772398_embed-google-search-bar.html. Just add the custom HTML to your Muse page by going to Object > Insert HTML.
    This page might also help you out: http://www.adobe.com/products/muse/embedded-html.edu.html
    Good luck!

  • How do you add a validator on a table?

    Hi,
    I have an ADF table. The user can add or remove elements to this table.
    I want to add a validator on the table, that will be invoked, when I leave the page.
    This validator will check if the user has added at-least one entry in the row.
    I created the validator. I cannot hook it to the "af:table" component. The table component does not provide any kind of validator attribute.
    I tried adding "<af:validator></af:validator>" within the table and it didn't work.
    How do you add a validator on the table?

    Olivier,
    My page fragment that contains the table, is 3/5 train stop out of a train.
    So when I say leave the page, I mean navigate to the next or previous train stop.
    All I want to do is make sure that the user added at-least one row to the table e.g. one contact. This kind of validation does not belong on the entity. That is because that validation will not get fired until the commit point; which in my scenario will be on the 5th train stop i.e. too late.
    As for your other suggestion about adding a button or a link, that is not an option. A button or a link would require explicit user action. What happens if the user doesnot click the link or the button? Then the validation will not be invoked and the user will be allowed to go to the next fragment without adding the contact row.
    --ajay                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • How do you create a link to a pdf in Muse? Thought it was going to show that with Katie's menu and can"t find in any of the tutorials.

    How do you create a link to a pdf in Muse? Thought it was going to show that with Katie's menu and can't find in any of the tutorials.

    The steps would be :
    - Add files from file menu > select pdf > add to site
    - Select the content (rectangle,text etc) and click on hyperlink dropdown > it should show you the added files list
    - Select the file you want to link
    Thanks,
    Sanjit

  • How do you create a new apple id on the iphone

    how do you create a new apple id on the iphone 4?

    Why do you want to do that?

Maybe you are looking for