F4 help is not available for cost center in Confirmation
Hi
We are working on SRM 4.0
During the Confirmation of services through WEB portal ( F4 ) option is not available for Cost Center
Through GUI ( Backend) we are able to see the Values in Drop down , but when we select them un able to copy them to Confirmation screen.
Through Web front end F4 help also not appearing.
We have applied the OSS Note 935201 in spite of which, it is not working
please give me inputs on it.
Regards,
Neelima
Edited by: S Neelima on Dec 9, 2009 4:54 AM
Any inputs???
Regards,
Neelima
Similar Messages
-
Why time-dependent not work for cost center and profit center hierarchy
Has anybody been able to successfully turn on time-dependent for cost center hierarchy? Looks like the R/3 datasource 0COSTCENTER_0101_HIER is defaulted to be NOT time-dependent, and I dont know how to change the R/3 configuration to enable time-dependent for this datasource.
Here is what I found. If you go to RSA2 in R/3 and enter datasource 0COSTCENTER_0101_HIER, and then select "Hierarchy Info", you will see that all the time-dependent properties are unchecked by default. By comparison, Cons Unit datasource 0CS_UNIT_CSCU_HIER has Version Dependent Hierarchy as selected, and we are able to load Cons Unit hierarchy as time-dependent, but have no luck so far with the Cost Center hierarchy.
Can any BI guru tell me how I can make time-dependent work for the cost center hierarchy?
Thanks a bunch!Check SETLEAF and SETNODE.
Basically CO Master data groups dont have seperate tables. They will be available in above tables. Choose proper Set class to filter the results -
Actual activity price does not exist for cost center / activity type
Hi,
We are trying to upload the time sheet related data(number of hours an employee workred on a project) ect from Non SAP to SAP.
We have used a customized program and have loaded the data from se38.
All this HR data will be saved in CAT2
Later we transfer the time related data into SAP FI/CO using CAT7.
+When tested with a couple of employees time sheets, they got uploaded in SE38 proerly and when transfered it through CAT7 it was properly taking the hour*rate is cost and was reflecting in the respective cost element.
For a few time sheets in SE38 we were getting an error saying that the cost center(100501)/ activity type(EAT001) does not exist for 2010.
Hence we have taken, FY 2010, the cost centes and activity types in KP26 and have given the planned Activity as 1. No planned cost in KP06.
We have run the price calculation forr the FY 2010.
Then we were able to uplaod the time sheets, but when we tried to transfer the data through CAT7, it throws an error saying no activity price exist for cost center 100501/ activity type EAT001. If I ignore the warning an proceed, no amount is being calculated.
When uploaded employee time sheets before, all the cost were getting claculated and were entering into the respective cost elements, but now no amounts are being calculated and it is taking Zero.
When checked the previous years data i.e, 2009 all amounts are fine, in KSII I can see the activity quantity filled with some numbers in 2009, where from are they comming? I have checked KBk6 nothing was mentioned.
PLease assit
Regards,
shilpaHi
I never used CAT* though, but the error means that you need to maintain a activity price in KBK6 (Actual price)
Regards
Ajay M -
Account not valid for cost center
Hi,
In MR11, I am getting error:
Account 1223000 not valid with cost center or I/O only WBS is allowed.
any ideas?Remove the cost center and populate WBS element. Looks like that account does not need cost center cost object but needs WBS only.
-
Substitution not working for Cost Center
Hi All,
We are using OBBH to make a substitution for Foreign Exchange valuation to meet one of requirement as cost center at line item level to be blank, we have made cost center field blank in substitution.
When we run the foreign exchange valuation system is updating the cost center from the source line item to the difference account. It is not considering the substitution value which is blank in cost center.But we have added some other fields in substitution those are working fine other than the cost center.
Do I need to make any settings for this to take cost center as blank at line item level.
Regards,
ShilpaHi Shilpa,
the substitution may be used for filling the cost center when it is empty, but not for clearing it when it is filled, because the substitution isn't called when the cost center is already filled.
Please read OSS note 1296568.
[https://websmp230.sap-ag.de/sap(bD1mciZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1296568] -
Co code not seen for cost center master data creation in OKEON
hI:
In org tab of Cost center master data creation while configuring cost center hierarchy in OKEON i can not see organization tab. I have checked in OKKP Co area is assigned to co code but still the issue persist.
Brhi
you mean the tab is not displayed? strange, it seems that there should be a screen layout to control the ui, or any transaction variant is recorded. I tried in my side, the tab is there.
@ Murali, you are right, but in that tab, not only company code can be configured, but also business area, functional area etc.
best regards, Lawrence -
Catalog not available for Costa Rica
I've recently bought a Palm Pre2... as I should say this is the best smart phone i've had; i'm very frustrated by the fact that I cannot download anything from the Catalogl this because it is not open yet for Costa Rica.... c'mon!?!?!?
I cannot download any app, I can get system updates, but just that.
Is there any way I can get to the catalog? Can i use a USA sim and reset the profile? Please let me know what's the trick so I can get to download applications.
PLEASE let me know....
Post relates to: Pre 2 p102una (Unlocked NA)
Post relates to: Pre 2 p102una (Unlocked NA)If you have activated your phone using SIM card from Costa Rica you dont have an option get applications from US even if you try and sign in again using US Simcard. Partial erase, full erase, nor WebOS Doctor can fix this.
The device record is created once after creating your palm profile and this cannot be changed afterwards. Your first good activation will be for that device, no matter what you use next time you activate. -
Input help for cost center & WBS element not working
Hi ALL
We are using SRM 4.0 with backend ECC 5.0.
Input help for attributes cost center (CNT), WBS element (PRO) are not functioning.
When tried to search for input help (F4) on the above attributes, I am getting message "Display not possible (Inconsistency in the input help)".
I even applied SAP note 746788 for cost center search help.
Can you tell me if I have missed any config settings?
Thanks in advance
JagdishHi,
Did you managed the transactional RFC destination in the customizing (where you define all your log. systems it is an additional field in the table control).
Regards.
Vadim -
Goods Issue for Cost Center 201 : special stock E not supported
Dear guru ,
I need to run a goods issue(trx.MIGO) for cost center using movement type 201 for a material
in special stock E (with sales order and sales order item).
The system send this message : special stock E not supported.
How can it solved this problem ?
Thanks in advance.first tranfer stock from Sales Stock to Own stock as follows
Tcode - MB1B / MIGO
Mvt type - 411 E Transfer posting sales order to own
Then issue this own stock to Cost center as follows
Tcode - MB1A / MIGO
Mvt type - 201
hope it helps]
Regards,
Rahul -
Activity Type ENGINE not set up for cost center
Hi all,
Currently, we have set up a work center in our system, which has the following intergration:
- Controlling Area --> TECH
- Cost Center --> TECH001
- Activity Type --> ENGINE
- Plant --> PN01
- Work Center --> PL01
Based on the above, the work center PL01 has the relationship of where Activity Type ENGINE and Cost Center TECH001 are linked together, where Cost Center is tied to Controlling Area TECH.
However, when a user tried to create General Task List (Trxn IA05), under Work Center PL01 and Plant PN01, and inserted Activity Type ENGINE in Operation item. It gives the following error:
Activity Type ENGINE not set up for cost center
I have also checked KP26 that everything is setup correctly.
Please can someone shed some light on the above?
Many thanks and regards,
Patrick
PS: Full point guaranteed for helpful answer.Hi all,
I have solved the issue by changing the Start Date of the Work Center. Now everything works well.
cheers,
Patrick -
Binocular search for Cost Center is not returning any data
Hi Gurus,
When clicking on the SRM-Shooping Cart-Cost Assignment- Account Assignment Overview- Cost center Binocular search icon, it is not returning any data. However, when drilling down in the Account Assignment Overview, you will see another Binocular search icon for Cost Center which is working fine.
Any idea of how you troubleshoot it.
Thanks in advace for your help.
HANot sure about the cost assignment drill down, but after we applied SP13 to SRM server 550 the binoculars for cost center stopped working. the following note corrected this.
Note 1259735 - Search help of generic account does not work
If it has never worked, then probably need to setup a RFC dialog user for the F4 search help, Multiple threads on here around the dialog user for F4 with details on configuration and use.
JF -
Dear Heldesk Center, I remove clash of clan on my Ipad , then reinstall. Have error notice "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled." Please Help me
Make sure you are using the correct App Store
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3. Tap on your Apple ID
4.Tap "View Apple ID"
5. Enter your user name and password.
6. Tap "Country/Region."
7. Tap "Change Country/Region"
8. Select the country/region where you are located.
9. Tap "Done".
Note: If the change doesn't take effect, sign out of account and sign in again. -
Hi All,
I have 2 questions
1) we dont have any default cost center maintained any where in the org-structure (PPOMA_BBP), howeverwhenever I go for shopping I can see a cost center along with GL account, ( I know GL acct is coming from "determine GL account for prod-cat" settings in IMG), but what about cost center where is it coming from ??
2) second, when we do search help for cost center's in shopping application, we are able to see all cost centers from the back end which I guess is good, but we can see even those cost centers which are blocked!!!, why is this happening ??,
Thanks.Hello,
For First::
In general the CO Area (here: cost center) is derived from R/3 Backend Enterprise
Structure and should be re-determined if another acc. objects is
entered that belongs to a different CO Area. Please also check the
settings in R/3 Backend IMG, path:
->Enterprise Structure ->Assignment ->Controlling
->Assign company code to controlling area
The company code is assigned to the CO Area through the following
assignment:
->Materials Management
->Assign purchasing organization to company code
The CO Area is in general the organizational object in
highest (CO) level. Assignments to other MM/CO objects are located
in lower Enterprise hierarchy level. Hence, the CO Area does not
change if a different CO object of a lower level (here: cost center)
is assigned to a SRM document.
For Second::
The only possibility I see is to set the message to error message in
the customizing in the backend. The message number is KI 170. When you
look at the long text of this message in transaction SE91 in the
backend, you will find the description where to look in the customizing.
When you have set this message to ERROR, then no purchase order will be
created in the backend. Instead the shopping basket gets the status
'ERROR' and the administrator will recieve a work item in his inbox.
Then he can check the backend and either post the purchase orders again
after solving the problem, or he can delete the shopping baskets.
Please check the note for more infos or the documentation.
Setting the message KI 170 to error message will solve your problem.
See note 333136. I would think that if you create
a PO directly in the backend if you do not have the message configured
as and error you will be able to create the PO.
I hope this information helps.
Kind regards,
Gaurav -
Hi,
A few songs from my old purchase is not available for download. It shows as purchased but I can't download it. Please help me resolve this problem, what do I need to do to enable download for all my purchased songs/movies etc.
- AvinashThe purchases are probably hidden:
http://support.apple.com/kb/ht4919 -
Recent upgrade to OS X Yosemite on my MAC and iPhoto update can not now be installed msg reads, "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled." this is not possible help?
That error message can be misleading. It means, that iPhoto on your Mac is not associated with your Apple ID.
Either you did not set up your Mac using the same Apple ID - did someone help with your setup and use a different ID? Perhaps a family member? Or did you let someone borrow your installer disks?
Or did you not yet "Accept" iPhoto and other iLife apps to your Apple ID? Check the "Purchased" tab of the App Store, if any applications are waiting to be accepted. If you see "Accept" buttons, press them.
You may be unable to "Accept" now, if you missed the update to iphoto 9.5.1 on Mavericks. You could try to buy iPhoto, however. If you are lucky, it may show for free.
Backup your iPhoto library, if you do not have a current backup.
Uninstall iPhoto by deleting it from the Applications folder, but do not empty the Trash, so you can put it back,if need be.
Launch the App Store, click the "Store" menu, and sign in with your current AppleID.
Open the main page "Featured" of the App Store and search for iPhoto.
If iPhoto is listed as "Free", click the "Free" button to buy it with your current AppleID.
If it is not showing as free, there is no help but contacting the App Store Support to sort out the AppleID. Use this link: http://www.apple.com/support/mac/app-store/contact/
Maybe you are looking for
-
Creation of SDEB's for MRP type = VB materials.
Hi Gurus, When we run plant wise MRP, SDEB's are created instead of Purchase requisitions for all Manual re-order point materials. We understand that SDEB's are created when the stock of tha material is above tha Re-order point, and this SDEB's indic
-
Can I share an Ipod between two User accounts
Trying to share one Ipod between two accounts ! but dont seem to be able to download from different accounts onto Ipod, outside of Ipod original account !!
-
for some reason, all of our win7 clients running outlook 2010 in cached exchange mode receive thousands of synchronization log message every morning when they wake their desktops. anecdotally seems to be worse if they leave outlook running overnight,
-
I accidentally deleted my home file in Mavericks. I cannot reopen it, and have no access to my applications or my files.
-
ServletContext Vs Properties file
Dear Friends, My question is related to optimization. In our Servlet application, We have to read some values from properties files. In this which one is better from the following or is there any better way of doing? 1. Reading from the Properties fi