Actual activity price does not exist for cost center / activity type

Hi,
We are trying to upload the time sheet related data(number of hours an employee workred on a project) ect from Non SAP to SAP.
We have used a customized program and have loaded the data from se38.
All this HR data will be saved in CAT2
Later we transfer the time related data into SAP FI/CO using CAT7.
+When tested with a couple of employees time sheets, they got uploaded in SE38 proerly and when transfered it through CAT7 it was properly taking the hour*rate is cost and was reflecting in the respective cost element.
For a few time sheets in SE38 we were getting an error saying that the cost center(100501)/ activity type(EAT001) does not exist for 2010.
Hence we have taken, FY 2010, the cost centes and activity types in KP26 and have given the planned Activity as 1. No planned cost in KP06.
We have run the price calculation forr the FY 2010.
Then we were able to uplaod the time sheets, but when we tried to transfer the data through CAT7, it throws an error saying no activity price exist for cost center 100501/ activity type EAT001. If I ignore the warning an proceed, no amount is being calculated.
When uploaded employee time sheets before, all the cost were getting claculated and were entering into the respective cost elements, but now no amounts are being calculated and it is taking Zero.
When checked the previous years data i.e, 2009 all amounts are fine, in KSII I can see the activity quantity filled with some numbers in 2009, where from are they comming? I have checked KBk6 nothing was mentioned.
PLease assit
Regards,
shilpa

Hi
I never used CAT* though, but the error means that you need to maintain a activity price in KBK6 (Actual price)
Regards
Ajay M

Similar Messages

Country implementation 40 does not exist for category IT and type 2001

Dear Experts,
I am getting the following error
"Country implementation 40 does not exist for category IT and type 2001".
when I tried to create a leave request. I think the HR Ess configuration is complete.
Kindly, give your valuable inputs, hence I can try & resolve this issue, as I am stuck with this for quite sometime.
Your inputs will be really valuable.
Thanks
Bala

After suffering this same problem and not finding any help or information ANYWHERE, I debugged the process and found that the error is caused by a missing entry in view V_BLPTYPECOUNTRY.
I created a new entry in the view with a blank molga and the error goes away.
The entry I added was:
Category = IT
Data Typ = 2001
Ctry Grouping = (blank)
Class = CL_PT_BLP_IT2001
I hope that this can help anyone having the same problem in the future.

Cost Center does not exist for a particular period - Solution

We have encountered an error in the subject,
COST CENTER does not exist for a particular period
Solution:
1) Either extend the Posting period for the invoicing date
2) Or enter the Cost Center as PO number in Sales Order
Please do add your comments if there are different ways to solve this error

The Post contains a solution

Profit center 1000/9999 does not exist for 21.10.2008-Message no. KM026

Hello
I am trying to create Inquiry through T-code VA12 but when I am assigning Project with it pop up error
Profit center 1000/9999 does not exist for 21.10.2008
Message no. KM026
Diagnosis
The desired profit center 9999 is not in the master data table for the specified date.
Procedure
Check your entry.
Note: The profit center is usually derived from the original account assignment object (cost center, order, and so on) or other information (such as the material number).
If necessary, create the desired profit center for the appropriate time frame.
Initially in this system dummy profit center activated but I now I donu2019t want dummy profit center so I changed master data date but now I am getting this error.
From were this (9999) dummy profit center is picking.
If some body has Idea let me know

Dear,
Go to tcode KCH5N select ur profit center on the right side u will find the validity period button click it to check. . If the posting is taking place within the validity period no issue else extend the validity period..
To check the period closing t.code is MMRV
To close the period - MMPV
If the problem still exists, then please go to KE53, give the respective profit center in which the material is assigned and enter.
There you can see the validity period for that profit center and I presume the validity period is ended before the creation date. Check that.
Regards,
R.Brahmankar

ORA-20211: Active job does not exist, cannot link to job record.

Getting the above error while executing OWB mapping in production environment.
Details of the error :
ORA-20211: Active job does not exist, cannot link to job record.
ORA-06512: at "RADRUN.WB_RT_MAPAUDIT", line 1278
ORA-06512: at "RADRUN.WB_RT_MAPAUDIT", line 2110
ORA-06512: at "RADSTG.MAP_STG_AIRCRAFT", line 2384
ORA-06512: at "RADSTG.MAP_STG_AIRCRAFT", line 2513
RADRUN -- runtime schema
RADSTG -- Target schema where mappings deployed.
source database is accessed through a DB link.
OWB version - 10.1.0.4.0
Oracle - 9.2.0.6.0
Here mappings are getting executed by calling a pl/sql procedure. This pl/sql procedure is executed every day by scheduling a dbms_job. After the error, the job is in hanging.
Last week also the same error happened, on that occasion , restarted the database and re submitted the job. Mapping executed without any error.
Looking for the expert comments

Hi.
See Note:125860.1 in metalink (and please, lol to solution #3). It applies to older OWB versions though... Are you using DBMS_JOB or OEM to run these mappings? If so, then the metalink note might be useful help.
Karesz, I believe if the source database was down, it would fail with an ORA-12XXX Error.
Regards,
Marcos

11.5.10.2 to R12.1.1 upgrade : AutoPatch warning : Product Data File $APPL_TOP/admin/*prod.txt does not exist for product

Hello Sir,
OS version : AIX 6.1
DB version : 11.2.0.3
EBS version : 11.5.10.2
As a part of 11.5.10.2 to R12.1.1 upgrade, I am applying merged patch (9179588:R12.AD.B) with 9477107:R12.AD.B and patch 7461070(R12.AD.B.1 upgrade driver).
I can see AutoPatch warning messages during adpatch session as below so I have not yet started this merged patch. Please suggest.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drix10:/fmstop/patches/R1211AD/merge>adpatch
                     Copyright (c) 2002 Oracle Corporation
                        Redwood Shores, California, USA
                         Oracle Applications AutoPatch
                                 Version 12.0.0
NOTE: You may not use this utility for custom development
      unless you have written permission from Oracle Corporation.
Attention: AutoPatch no longer checks for unapplied pre-requisite patches.
You must use OAM Patch Wizard for this feature. Alternatively, you can
review the README for pre-requisite information.
Your default directory is '/fmstop/r12apps/apps/apps_st/appl'.
Is this the correct APPL_TOP [Yes] ?
AutoPatch records your AutoPatch session in a text file
you specify. Enter your AutoPatch log file name or press [Return]
to accept the default file name shown in brackets.
Filename [adpatch.log] : adpatch_u_merged_R12AD11.log
You can be notified by email if a failure occurs.
Do you wish to activate this feature [No] ?
Please enter the batchsize [1000] : 2000
Please enter the name of the Oracle Applications System that this
APPL_TOP belongs to.
The Applications System name must be unique across all Oracle
Applications Systems at your site, must be from 1 to 30 characters
long, may only contain alphanumeric and underscore characters,
and must start with a letter.
Sample Applications System names are: "prod", "test", "demo" and
"Development_2".
Applications System Name [FMSTEST] : FMSTEST *
NOTE: If you do not currently have certain types of files installed
in this APPL_TOP, you may not be able to perform certain tasks.
Example 1: If you don't have files used for installing or upgrading
the database installed in this area, you cannot install or upgrade
the database from this APPL_TOP.
Example 2: If you don't have forms files installed in this area, you cannot
generate them or run them from this APPL_TOP.
Example 3: If you don't have concurrent program files installed in this area,
you cannot relink concurrent programs or generate reports from this APPL_TOP.
Do you currently have files used for installing or upgrading the database
installed in this APPL_TOP [YES] ? YES *
Do you currently have Java and HTML files for HTML-based functionality
installed in this APPL_TOP [YES] ? YES *
Do you currently have Oracle Applications forms files installed
in this APPL_TOP [YES] ? YES *
Do you currently have concurrent program files installed
in this APPL_TOP [YES] ? YES *
Please enter the name Oracle Applications will use to identify this APPL_TOP.
The APPL_TOP name you select must be unique within an Oracle Applications
System, must be from 1 to 30 characters long, may only contain
alphanumeric and underscore characters, and must start with a letter.
Sample APPL_TOP Names are: "prod_all", "demo3_forms2", and "forms1".
APPL_TOP Name [drix10] : drix10 *
You are about to apply a patch to the installation of Oracle Applications
in your ORACLE database 'FMSTEST'
using ORACLE executables in '/fmstop/r12apps/apps/tech_st/10.1.2'.
Is this the correct database [Yes] ?
AutoPatch needs the password for your 'SYSTEM' ORACLE schema
in order to determine your installation configuration.
Enter the password for your 'SYSTEM' ORACLE schema:
The ORACLE username specified below for Application Object Library
uniquely identifies your existing product group: APPLSYS
Enter the ORACLE password of Application Object Library [APPS] :
AutoPatch is verifying your username/password.
The status of various features in this run of AutoPatch is:
                                           <-Feature version in->
Feature                          Active?   APPLTOP    Data model    Flags
CHECKFILE                        Yes       1          1             Y N N Y N Y
PREREQ                           Yes       6          6             Y N N Y N Y
CONCURRENT_SESSIONS              No        2          2             Y Y N Y Y N
PATCH_TIMING                     Yes       2          2             Y N N Y N Y
PATCH_HIST_IN_DB                 Yes       6          6             Y N N Y N Y
SCHEMA_SWAP                      Yes       1          1             Y N N Y Y Y
JAVA_WORKER                      No        1          -1            Y N N Y N N
CODELEVEL                        No        1          -1            Y N N Y N N
Identifier for the current session is 2987
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/eaaprod.txt
does not exist for product "eaa".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/abmprod.txt
does not exist for product "abm".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/evmprod.txt
does not exist for product "evm".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/ipdprod.txt
does not exist for product "ipd".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/zfaprod.txt
does not exist for product "zfa".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/zsaprod.txt
does not exist for product "zsa".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/cssprod.txt
does not exist for product "css".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/meprod.txt
does not exist for product "me".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/xnmprod.txt
does not exist for product "xnm".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/xncprod.txt
does not exist for product "xnc".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/xnsprod.txt
does not exist for product "xns".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/fptprod.txt
does not exist for product "fpt".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/okrprod.txt
does not exist for product "okr".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/cueprod.txt
does not exist for product "cue".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/ibaprod.txt
does not exist for product "iba".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/ozpprod.txt
does not exist for product "ozp".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/ozsprod.txt
does not exist for product "ozs".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/rlaprod.txt
does not exist for product "rla".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/vehprod.txt
does not exist for product "veh".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/rhxprod.txt
does not exist for product "rhx".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/imtprod.txt
does not exist for product "imt".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/ahmprod.txt
does not exist for product "ahm".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/okbprod.txt
does not exist for product "okb".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/okoprod.txt
does not exist for product "oko".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/xniprod.txt
does not exist for product "xni".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/jtsprod.txt
does not exist for product "jts".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/amfprod.txt
does not exist for product "amf".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/cunprod.txt
does not exist for product "cun".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
Reading database to see what industry is currently installed.
Reading FND_LANGUAGES to see what is currently installed.
Currently, the following language is installed:
Code   Language                                Status
US     American English                        Base
Your base language will be AMERICAN.
Setting up module information.
Reading database for information about the modules.
Saving module information.
Reading database for information about the products.
Reading database for information about how products depend on each other.
Reading topfile.txt ...
Saving product information.
Trying to obtain a lock...
Attempting to instantiate the current-view snapshot...
No baseline bug-fixes info available. Will attempt next time.
     **************** S T A R T   O F   U P L O A D ****************
Start date: Sun Aug 04 2013 18:45:12
0 "left over" javaupdates.txt files uploaded to DB: Sun Aug 04 2013 18:45:12
0 patches uploaded from the ADPSV format patch history files: Sun Aug 04 2013 18:45:12
Uploading information about files copied during the previous runs ...
0 "left over" filescopied_<session_id>.txt files uploaded to DB: Sun Aug 04 2013 18:45:12
     ****************** E N D   O F   U P L O A D ******************
End date: Sun Aug 04 2013 18:45:12
Enter the directory where your Oracle Applications patch has been unloaded
The default directory is [/fmstop/patches/R1211AD/merge] :
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

I checked under 11i $APPL_TOP/admin directory, I can see only one izuprod.txt file apart from applprod.txt.
drix10:/fmstop/fmstest/fmstestappl/admin>ls -lrt *prod.txt
-rwxr-xr-x    1 appltest dba          231650 Oct 30 2004 applprod.txt
-rwxr-xr-x    1 appltest dba            4966 Sep 21 2007 izuprod.txt
R12 code tree is newly installed so there is only applprod.txt
drix10:/fmstop/r12apps/apps/apps_st/appl/admin>ls -lrt *prod.txt
-rwxr-xr-x    1 appltest dba          226340 Jul 29 15:19 applprod.txt
Please suggest if I can ignore these warning to proceed with applying merged patch.

Problem in merge statement -ORA-27432 Step does not exist for chain

Hi
I m getting ORA-27432 Step does not exist for chain error in merge statement.Please explain the same.
MERGE INTO fos.pe_td_hdr_sd B
USING (
         SELECT ACTIVE, ADDUID, ADDUIDTIME,TDKEY         FROM pe.pe_td_hdr
          WHERE (adduidtime like '20070104%' or edituidtime like '20070104%')
          AND NVL(legacy_td,'N')<>'Y'
          AND SUBSTR(adduidtime,1,4)='2007'
          AND AMENDMENT_NO=0)A ON ( B.TDKEY = A.TDKEY)
WHEN MATCHED THEN
    UPDATE SET B.ACTIVE=A.ACTIVE,
B.ADDUID=A.ADDUID,
        B.ADDUIDTIME=A.ADDUIDTIME
WHEN NOT MATCHED THEN
                INSERT
                          B.ACTIVE,
                          B.ADDUID,
                          B.ADDUIDTIME)
                    VALUES(
                          A.ACTIVE,
                          A.ADDUID,
                          A.ADDUIDTIME)This query is a short version of the main query.It is same but having 180 columns in original table.

What version of Oracle are you using? This message does not appear in my 10.1 Error Messages document, but the other messages in that range seem to be about DBMS_SCHEDULER.
Are you using scheduler somewhere around where you are getting the error message?
John

OWB 9.2: Active Job Does not Exist !

OWB:9.2.0.2.8
I have opened a TAR for this, not much headway so far
Error Message: ORA-20211: Active job does not exist, cannot link to job record.
Here is the sequence of events
1) A test database was cloned fom production
2) We were able to to get the runtime instance on test running by setting the fields in wb_rt_service_nodes
Service doctor now indicated that the service was up
3) Using OWB deployment mangager, I tried to execute a map and got this message
Starting Execution EU_ITM_WH
Starting Task EU_ITM_WH
ORA-20211: Active job does not exist, cannot link to job record.
ORA-06512: at "OWB_RR.WB_RT_MAPAUDIT", line 1252
ORA-06512: at "OWB_RR.WB_RT_MAPAUDIT", line 2084
ORA-06512: at "OWB_TS.EU_ITM_WH", line 2250
ORA-06512: at "OWB_TS.EU_ITM_WH", line 2331
ORA-06512: at line 1
Completing Task EU_ITM_WH
Completing Execution EU_ITM_WH
I searched Metalink and got some references to this.but they seem out-dated.

Did you try to stop and start the runtime sevice by using stop_service.sql/start_service.sql from the <OWB_HOME>/owb/rtp/sql directory?
Also, you say that you cloned the database - are the database parameters different in the cloned database (db name, hostname, port, user name, password)? If yes, did you change the location registration parameters?
Regards:
Igor

Profit center US01/ TP3870 does not exist for 03/23/2011

Hello Team,
Our Profit Center is 6045TP3870 but when SD guy is releasing SD document for Account at VF02, he is getting below error,
"Profit center US01/ TP3870 does not exist for 03/23/2011"
I don't understand why the system has taken part of Profit Center only. Profit center 6045TP3870 is well exist for 03/23/2011.
I have checked the Material Master when the profit Center is correctly maintained.
Can any one help to resolve this issue.
Spandana

Hey Spandana,
Make sure the profit center is active, and if it is, check for relevant validations and/or substitutions with user exits.

Partner does not exist for partner function LF

Hi gurus
while trying to print the output of a Purchase order thru ME22N, after selecting Print output, Output type as Purchase Order (NEU), and a partner, the system isues a arning message "Patner xxxx does not exist for partner function LF".
Can someone pls explain what does this imply?
Regards
Deepak

Hi
xxxx is just a string to show you the Warning Message that appeared. Actually it was a Partner that was missing for the Patner Function LF.
Regards
Deepak Prasanna S

Archieve does not exist for purchase order

Hello Gururs,
When i tried to change the delivery date for the PO and when i trying to save the PO
then it throws the error messages-'Archieve does not exist for purchase order'.
PO was created in feb.
Please help me how can i solve this issue.
BR
Ashish

Can you give a more detailed information.
What transaction you actually use, what you enter step by step until you get to the error: 'Archieve does not exist for purchase order'
This message sounds like you want change a PO which is already archived.
A change to an archived PO is not really logical, as you can only archive closed business cases. and if the business case is closed, then why would you change the delivery date.
A PO from February should not really be archived already in June. I never saw it in practice, as you could not do any anual reporting
I would assume further that SAP found the entered PO number in the archive index but did not find the way to the archive itself. This can happen if the archive file was deleted or moved manually.
I am not sure if the next messae has really anything to do with your purchase order, thats why I ask you to post the exact steps until the messages come up:
Le fichier archieve 000524-002SD_COND n'existe pas is the message discription
But even this message explains more or less the same, that the physical archive is no longer in the same place where it is expected to be found according to the info in records of table ADMI_FILES.

Tax code V0 does not exist for jurisdiction code IN00 Message no. FF718

Hi,
i have configured as per suggestion in message as well as assign Jurisidiction code in taxcode in FTXP, but when i try to create PO with tax code V0 and jurisdiction code IN00 then we are facing error "Tax code V0 does not exist for jurisdiction code IN00 Message no. FF718"
please advice me and help to resolve this issue is any config missing pls guide me.
Thanks
Best regards
Shital D

Please check this answered link:
Juristiction code - Error: FF718
Cost centre
Edited by: Afshad Irani on Jun 22, 2010 7:05 PM

Profit cener 9999 does not exist for 31.01.2010

I am getting this error when i am doing confirmation.. that Profit center XXXX/9999 does not exist for 31.01.2010.
If i check in KE52 the profit center 9999 is not found.neither in KE53..
If that profit center is not there in the system,then why is that error message says that.. Where is the prof center 9999 linkd in production ord confirmation..
Please help me out
For information: I am doing the confirmation in plant aaaa,whereas we also have a plant yyyy extended now.. Is there anyway to find whether this profit center is linked with the second plant.. If yes how can we find that out
Edited by: karthick PP on Feb 9, 2010 4:32 AM

hi,
This profit center might be coming from cost center which is defined in work center of that operation.Other reason might be work center specific cost center doesn't have profit center assignment so system is tying to post this amount to dummy profit center.Please check dummy profit center has been defined for that period?
Please let me know.
regards,
ashok

Profit center 1000/DUMMY does not exist for 20.06.2011 KM026 - Asset postin

Hi Friends,
While posting asset opening balance (transaction type 100), we are getting the error 'Profit center 1000/DUMMY does not exist for 20.06.2011' for one company code. (not for all company codes. It is giving error to only one company code).
We don't maintain this dummy profit center as we have doc splitting activated for all the compay codes. So, master data for dummy profit center is not there in the system for all the company codes. But all the company codes are working properly except one company code. It is giving dummy profit center error.
Please could any one advice?
Thanks in advance.

Hi krishna Kumar,
I guess you are in ECC 6.0 version or above 5.0 version.
Up to 4.7 the profit center accounting was a part of Controlling. But from ECC 6.0 ( Enterprise Centrel Component) the profit center accounting is part of FI.
Regarding the error mentioned by you, you have activated profit center accounting from CO module, and you have assigned the number ranges for Profit Center Accounting, this means for the documents with the profit center account assingment system will generate 1 FI Document and 1 profit center document.
So wherever system is not able to find the profit center it will try to post the document for dummy profit center.
As per my experience with ECC 6.0 we need not activate and assign the number ranges for profit center documents.
Except OKE5 settings no other settings are required for profit center.
The above all is if you dont want to use classic profit center accounting. So first please check your requirement and take the decision.
thanks & regards,
shashi kanth.

IDoc message Document or line item does not exist for invoice reference

Hello,
We activated IDoc message type FIDCC2. When cancelling documents which were created before the activation date the cancellation documents aren't posted in the receiving system. Message 'Document or line item does not exist for invoice reference' appears. How can I process these items (the reference document can't exist in the receiving system so the only option is to remove it from the IDoc?)?
Regards, Jan

This is just a guide. Adapt it to your situation. I get this kind of error message where in the case, someone has marked for deletion a line item in the purchase order. In this regard, the IDoc errors out because the line item number being referenced is marked for deletion.
You can either delete the IDoc or have the deletion flag taken off the line item number in the PO or document number to enable you reprocess the IDoc number in question.
Elias

Actual activity price does not exist for cost center / activity type

Similar Messages

Maybe you are looking for