FA fixed assets API retirements
Hi, everyone know haow can I use API to retirements Fixed asset, what is the several set up?
Mass External Retirements
please
Edited by: 1010437 on Jun 7, 2013 3:53 AM
Pls check with this API
The Retirement API procedure is called: FA_RETIREMENT_PUB.DO_RETIREMENT ()
pls refer this note
Oracle Assets Retirements/Reinstatements API Documentation Supplement [ID 206476.1]
Similar Messages
-
Oracle Fixed Assets API for updating depreciation flag after conversion
Hi frnds,
Do we have any API's or update program to update the depreciation flag after asset conversion. We are converting all the legacy assets from 11.0.3 to r12 with a depreciation default flag of 'N' since depreciation is already calculated in 11.0.3 and we don't want to calculate any depreciation when we run our year end depreciation in R12. But anyhow at a later point we need to update the depreciation flag to the original value that of 11.0.3 in r12, so can you please help me if there is any API or standard program to update the depreciation flag.
Thanks,
PurnenderWelcome to the forums !
Pl post exact details of OS, database and EBS versions. Pl see if MOS Doc 206474.1 (Oracle Assets Adjustments API Documentation Supplement) can help
HTH
Srini -
Can someone point me to the documentation for the Fixed Assets APIs in 11.5.10?
I have searched 11.5.10 + Virtual Documentation, Metalink (which gave me some supplemental docs but not the full doc), eTRM (gives tables and diagrams only, not Open Interfaces) , OTN, etc.
I need to load and adjust assets from an external data source (not using ADI, too many assets for that), etc.
Thanks.Explore irep.oracle.com
http://irep11i10.oracle.com/OA_HTML/OA.jsp?page=/oracle/apps/fnd/rep/webui/InterfaceListPG&BusinessEntity=FA_ASSET&Title=Asset&retainAM=Y&_ti=1332308405&oapc=4&selection=8_0_0_&oas=EH51dPvIqkVJ5nBEhrL-3w.. -
DI API to import fixed asset master data and acquisition.
Hi,
Environment : SAP B1 8.8 PL18 & Fixed Assets Add-on 880.236.00.18
Have been used to add fixed assets, and would like to perform using the API to import fixed asset master data and acquisition.
The commands to access the table of fixed assets related to the API that is available?
Thanks.I have the same problem...
Is there anyone who have tried these things? -
Partial retirement in fixed assets
Hi,
we are having one strange fixed asset problem.. today we have processed all the fixed assets transactions from january to may
2000.. we did a partial retirement of an asset in dec 2001.. like we had 4 units of it and we retired 1 becaz it was stolen..
the transaction worked in december everywhere (like in fixed assets, general ledger)..now in 2002 this transaction is there
in fixed assets but not showing in General ledger so our fixed asset is not matching with general ledger.. so can someone
suggest that where we did the mistake??? any help will be highly appreciated..please let me know if i'm not clear enough
becaz i'm new to oracle finance...
Thanks.
SandeepHi Experts,
can anyone help me how can i identify what account i should be set-up in Account Determination of Fixed Asset
(Administration> Set-up> Fixed Asset> G/L Account Determination):
i am using SAP BUSINESS ONE 2007 A (8.00.181) SP:00 PL:47
1) Retirement: Net Method
a.) Sales Revenue for Asset Sales Net
b.) Asset Retirement with Exp. Net
c.) Revenue for Asset Retirement Net
2) Retirement: Gross Method
a.) Leave with Expense Net Book Value
b.) Leave with Revenue Net Book Value
I can not run the Retirement of Assets because this part was not been set-up
and Please do sent me also the copy of PDF to my e-mail.. thanks.. -
Life Years and Retirement Date in Fixed Assets
I am doing Asset conversion and the client has to enter life in years for all assets and retirement date for some. fa_mass_additions table doesn't have provision for these fields. Also, the client has only 1 book, so default life in years is selected for all and I have to change that after conversion. Can anyone please help me how do I change the life years after conversion of the assets (manually not feasible) and also how do I import the retirement date for the assets.
Thanks.My Impression was that only upgrade to 11.5.10 and upwards will deliver this functionality. Can you please give the patch number which fix this problem?
thanks, -
Is there any API to update Fixed Asset minor category ?
Hi,
My client need to update the minor category of 3000 Assets.
Is there any API to mass update Fixed Asset minor category ?
Thanks,
JoeHi Joe,
You could use the reclass API : FA_RECLASS_PUB.DO_RECLASS
Based on the new minor category, derive the correct asset category and pass it to this API along with other required parameters.
Regards,
Mukul -
Depreciation On Retired Fixed Assets
Need assistance in troubleshooting an error reported during depreciation process. Error occurs when starting the process "GAINS/LOSS" section of the run. It reports error in CCID for a particular asset which has been retired due to sales. We've checked already checked all set-up relating to depreciation & retirement, which looks ok. Process goes through without error when we "unretire" the asset.
Any suggestions on what else to look out for?
WY Yap (m'sia)Hi
Th reason for this is that retirement (scrapping) is calculated
as netbook value - less planned depreciation from the start fiscal year
until date of retirement) disregarding depreciation runs for the
period
Note 1162647 it does not explain this particular scenario
but in general refers that retirement is based on calculation on
planned annual values
Example:
Fixed asset values
start fiscal year 2008 (start 01/01/2008) is 1200
the useful life is 24 months = 50 to be depreciated per month
last depreciation run was for period 01/2008 , meaning the
netbook value was after that 1150 =(1200 - 50)
Then post retirement (total scrap) on 01/06/2008
The system will do retirement for the values calculated for the year
950 = (1200- 250 ) being 250 = 50 * 5 months (from start fiscal year
until date of retirement)
The depreciations will also being calculated and executed from
start fiscal year until date of retirement)
If this is not the case, I am afraid that you have to log a message on Sap portal for the assistance. -
Fixed Assets - retirement issues
Oracle Assets : Retirement and reinstatement of an asset
Version -10.7
Units : 12 Nos.
Dt Placed in service : 03-05-2001
Units retired : 3
Dt of retirement : 16-05-2001.
In process of retirement, entered wrong date(i.e
default date of the current open period - 30-June-2001)
and retired the asset. Then, Calculate gain/loss program
was run which ended with error no.APP-48154.
Failed reason: FAPROC : Units out of balance.No more assets
to retire.
Later,instead of reinstating,corrected the current cost
in the depreciation books thinking that in retirement books
it would be reinstated with original cost and units.But it
didn't happen so. And then,we tried to reinstate - by querying
on transaction number and then row/delete. It is not getting
deleted.
Error message: APP-47433
You cannot delete retirement because there are transactions
after it
Cause:
"You have performed one or more transactions on
this asset since the partial retirement so you cannot
reinstate the partial retirement.
Action:
Use the Transaciton History form to view the
transaction history for this asset.
Now, what is the course of action?You might have luck - if you post in the right forum!
Try here - SAP ERP Financials - Asset Accounting -
How can we import Fixed asset of the current year ?
Hi ,
in 1272578 note , SAP Support explain that's it's not possible to create fixed asset of the current year( example = acquisition date = 2009-02-01 ) using import , but they gave no workaround .
does it mean that we have to manually create all assets of the current year ? or there is another way ( using DI-API for example ) ?
ThanksGood day
The fixed asset master data import functionality in SAP Business One is used to import assets of the previous year. If you are to force the importation of current year assets some of them might load but system will not be able to calculate planned depreciation for that year, which will give u problems when u try to run depreciation forcing u to post manual depreciation.
With manual depreciation will not look good on the Fixed Asset Master since it sort of duplicate depreciation ONLY on the Master your report will be fine.
Capturing Current year assets manually will be the safer road.
Thanks
Louis -
Question on fixed asset reports
Hello all,
I work in the real estate accounting department of a large retailer. At quarter/year end we are required to prepare a set of workpapers to support the fixed asset ledger and related P&L accounts. Currently, we are using the following reports:
To support asset account activity:
S_ALR_87011967 Asset balances by site
S_ALR_87012050 Asset acquisitions
S_ALR_87012052 Asset retirements
S_ALR_87012054 Intracompany asset transfers
To support P&L account activity:
FBL3N G/L account line items
The problem we are running into is that, for example, impairment losses are processed by retiring all the assets of the company and reacquiring them at the new fair market value. The net difference is the loss on impairment. Unfortunately, it shows up in our reports as a very large retirement followed by a very large acquisition. These need to be netted together on our schedules for the auditors. The problem right now is that we dont have a good detail report to find impairment retirements/acquisitions, for when we select list assets in the retirements or acquisitions report it gives a hierarchical style report, which is almost impossible to export and process in Excel.
So, my question is really twofold. Firstly, is it possible to turn off the hierarchical setting of a retirements or acquisition report when list assets is selected? Ideally, I'd like to see all the same data on a single row.
Secondly, my real dream report would be more of a standard general ledger with a beginning balance, activity, and ending balance for the period that I could use for all my balance sheet and P&L accounts. Ive tried using the FBL3N report for the balance sheet accounts and it works okay, but I havent been able to figure out how to get it to show the transaction types from the fixed asset ledger. I read something in another post that talked about using the BWASL field to show the transaction types, but I wasnt able to locate it in the available fields list. Do I need to do something special when I run the report?
Thank you so much!Hi Andreas,
Thanks for getting back to me so quickly!
I thought a custom query would probably be best. I'll need to request access to the transaction before I can try it out, but I'm sure I'll have a bunch more questions to bug you with when I do!
Thanks again,
William -
Fixed Assets Report on Acquisitions & Disposals
Hi,
Dear Friends could you please advise as to how can we generate the Fixed Assets Report for acquisitions and disposals of assets? Also we need to generate a report on Fixed Assets giving the complete details on opening balance, depreciation, acquisitions, disposals and closing balances.
Your help would be much appreciated.
Thanks in advance.
RegardsHi,
The following reports should meet your needs:
Asset History Sheet - Tcode AR02 - opening balance, depreciation, acquisitions, disposals and closing balances
Asset Acquisitions - Tcode AR05 - acquisitions
Asset Retirements - Tcode AR06 - disposals
Thanks,
Chad -
Fixed asset error: 21151: error while posting asset document: '100000039'
Hello Experts,
How are you? We have a client who have encountered an error during fixed asset retirement thru scrappingu2026.In one retirement document, SAP did not assign an account in the account column but still the document was saved but with erroru2026On her next retirement document, she could no longer save her document and the error points to the last retirement document she has saved with error. We have tried to cancel the document and its journal entry but still she could no longer retire assets using scrapping. All other retirement transaction using scrapping could not be saved.
The client is using SAP B1 8.81 patch 5.
Thanks and best regards,
Luzhi Luz Cornejo,
please do check this SAP Note: [1246921|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3030303132343639323126]
regards,
Fidel -
Automatic VAT code during fixed asset PO creation
Hi all,
We have a classic AUC acquisition process : through MM with IO allocation.
My question is = is it possible to automatically affect one VAT code relating to fixed asset acquisition during purchase order creation? (and not VAT relating to goods and services acquisition, we have to distinguish both with french rules).
The person in charge of PO creation don't have to choice between VAT codes, this is the reason why VAT code has to be affected automatically.
Thanks in advance for your answer.
Best RegardsHi Ocean,
if you use as91 you have to enter as followed:
***.acquis.val. 120.242,00 <- enter
***.down paymts
***.reval.of RV
***.invst.grant
Accm.ord.deprec 70.809,18 <- enter
***.Spec.dep.
***.unplnd.dep.
***.reserves
***.reval.O.dep
Net book value 49.432,82 <- calculated automatically
***. interest
Reval. posted
Ord.dep.posted 3.340,06 <- enter
Pstd.spec.dep.
Pstd.unpl.dep. 0,00
Res.posted
Of course SAP reverses the amount because it is entered as ord dep. posted (this means current fiscal year!!!) insted of accm. ord. depr. (depr. up to 31.12.2007)
The ***. depreciation up to 31.12.2007 has to be enterend in ACCM. ord. deprec.
The *** and posted depreciation from the current year has to entered in ORD.DEP.Posted, pls. have a look at my calculation.
How to correct the fields Ord.-dep. posted and Accm ord. dep? This depends on many parameters:
Have you carried out the datantransfer already in the P-System????
Any other postings for SAP AM already carried out
How many assets have to be changed.
You can reset the Companycode in AM (only recommendable if deprun is not posted and no other postings - retirements, aquisitions transfers have been entered). Then start a new upload
Even lsmw and a BI-recording as92 with the last screen could be a solution.
At least if you have only a few assets - correct them manually - it's not worth the effort to create a BIR and a LSMW - the user is faster.
Best regards
Horst -
How to clear all fixed assets in SAP Business One
Client wants to clear all fixed assets and create new ones. What is the best way to do it.
Thanks.Hi,
My assumption is that your customer is using 9.0, is it?
I assume that the reason is because there was a mistake during the implementation, meaning that assets created using the application or using import fixed assets master data from excel are not what the user wanted.
The existing rule is that only assets in status 'new' can be removed, and this is a consistency requirement, both technical and from accountancy point of view.
So if the asset is not in status 'new' , it cannot be removed.
What you can do is cancel all transactions generated for the asset, acquisitions, retirements, etc, starting from the last, transaction, until you cancel the first.
Then you execute again depreciation run, to ensure any automatic posted depreciation is reverted.
This way the asset will remain in the system, but with no value. And you can eneter the new assets that will substitute them.
Jose
Maybe you are looking for
-
Preview not showing pdf document.
Preview 8.0 has stopped showing some of my pdf documents when opened. the documents show up as thumbnails but not on the main document space which is blank. it will temporarily show but then goes blank in a second. i recently upgraded to Yosemite
-
Do you know any event like on_text_changed?
As you know it is a good event, especially useful while populating another textbox, for example when the carNo is entered, the driver's name, surname, city e.t.c textboexes should be populated with data. Do you know how I can do that? Note: I am usin
-
XI 2.0 Runtime Workbench error
Hi all, After I log into the RWB, the page does not load completely, i.e. the tabs 'Exchange Infrastructure' and 'Business Systems' do not appear in the left frame. The Left frame except for scroll bars is empty and there's nothing in the right fram
-
Hi All, I have some issue with active sync. the activesync is not starting. i observed one thing, in severs tab. the server is inactive. how do i active the server. could you please give me some solution, as soon as possible. Thanks in advance.......
-
Using External Effects with Logic
I'm about to purchase Logic 9, and also need an Audio Interface. I've got a Korg MicroKorg, which I intend to line-in for its own synth functionality. I also intend to use it as a midi control surface to use percussion, etc., in Logic. How would t