Facebook - won't install, don't meet requirements?

I have a Pearl 8130 with unlimited data plan from Verizon. Updated to OS 4.5.0.175 and trying to re-install Facebook (I had it before?!) directly from my browser. But the download is telling me that I don't meet the requirements? What am I missing? Has something changed or is Facebook just being a pain?
Pearl 8130 - Verizon - OS 4.5.0.175

Strange. I know Verizon requires the correct BlackBerry Data Plan for its BlackBerry users.
From your BlackBerry browser, go to www.blackberry.com/facebook
Attempt the download from there. What happens?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

T400 WinXP SP3 - Intel GM45 Driver won't install (Doesn't meet requirements error)

I have a ThinkPad T400 running WinXP SP 3 with a P8400 CPU and 2 GB of RAM. I've re-installed an OS on the laptop 5 or 6 times now without any problems, switching between Windows and Ubunutu. I went to do a clean Windows XP install the other day though, and everything went fine until I went to install the video driver. When I tried to run the VGA, Intel 4500MHD (Intel GM45 Express Chip), driver setup I receive the following error message:
"The computer does not meet the minimum requirements for installing the software."
I googled around and immediately saw others with the exact same problem except I haven't been able to find a resolution. There is another support thread similar here: http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/Workaround-Here-New-GM45-Integrated-Graphic... but this isn't working for me. Anyone have any ideas how I can get my VGA Driver up and running again?
I also have tried seeing if Lenovo keeps a roll-back archive of older drivers to see if they would have an older version of my driver (one that I know works) but had no luck. I tried calling support and they said only that whatever driver came up when I found my computer was the one they had. Any help would be greatly appreciated!! Thanks

The installer (.exe file) extracts the files before giving me the error message. So when the "Add New Hardware Wizard" pops up on a restart, I try manually pointing it to the driver in the intel ../DRIVERS/WIN/DISPLAY2/Graphics sub-directory. This didn't work the first few times I tried it. Then on the 4th or 5th time, it saw the driver and installed it. However, upon a restart, it popped up the "Add New Hardware Wizard" again and the VGA Controller was again listed under Unknown Devices in the Device Manager. Anyways, thought some more info might be helpful. Thanks again in advance for any help

Don't meet requirements for safari beta?

I tried to download Safari 3 and was told I don't meet requirements though I have 10.4.9 and 27 gigs free space on my hard drive. Anyone else have this problem? I'm sad! I wanted to see it!

Hi dobes918,
I just download it on my PC and macmini (1.5Ghz/512mb) and so far both are work for me.
http://www.apple.com/safari/download/
Try to restart your macbook, run software updater, update anything that offered by software updater and re-download from link above.
Good luck.
ps: repair your permission by open application folder > utilities > disk utility > repair permission everytime you install/remove application, or update your software and hardware.

Facebook won't install; device not supported?

Hi all,
I just got my first blackberry (curve 8330) yesterday. On my plan I have unlimited use of the Facebook app (although I'm told I need v1.6 to avoid data charges).
I initially tried downloading the facebook app from the blackberry website using my laptop. However, when I had my curve connected via USB it said that my device was unsupported for use with the Facebook app. I'm pretty sure it is compatible with the 8330, is it not? Anyway any help would be greatly appreciated! I don't want to be paying for facebook use if I can't even use it.
BTW my curve is running v4.5.0.169 (Platform 3.4.051), I'm sure this is the most recent available update.
Thanks again!!!

1. Do you have THE BlackBerry Data Plan with your carrier? That is what's needed.
2. .169 is not the latest OS release for the 8330, I think .175 is the latest, although .169 could be latest from your carrier.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

BlackBerry App World says I don't meet requirements.

I tried to go to the BlackBerry App World page and download it. It said my phone doesn't meet the requirements but I have checked and it does. Any ideas what I am doing wrong?

Try accessing it on your phone's browser using the following address: http://mobile.blackberry.com.
It should show up under the What's New section and should be the first item on the list. This is where I accessed mine from and had no problems. The actual address for the download is http://mobileapps.blackberry.com/awclient/download.shtml?code=appworld&CPID=MBC_WHATSNEW
I hope that works for you!
If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
If your issue is resolved, don't forget to click the Solution button on the resolution!

Facebook won't install v6.5 on my 5th gen iPod Touch.

Facebook v6.5 came out yesterday. My iTouch is running iOS 7. When I go to "Show in Windows Explorer" in iTunes, it shows me that the file is "Facebook 6.5.ipa". Yet, continually, my iPod is reporting that it's version 5.0 that is installed, and the lack of a button bar at the bottom of the screen backs that up.
Why the heck won't this upgrade properly?

After your initial post I successfully updates my FB on my iPad and iPhone to 6.5.
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>iTunes and App stores and sign out and sign back in
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. Make sure your iTunes library has 6.5. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Can't install itunes on windows 7 machine. I keep getting A message stating that I don't meet min. requirements, but the machine has more than enough. What do I need to do to correct this?

Can't install itunes on windows 7 machine. I keep getting A message stating that I don't meet min. requirements, but the machine has more than enough. What do I need to do to correct this?

Are you trying to install the 32-bit version on a 64-bit machine, or vice versa?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with third party software.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

I just installed Airport Extreme. It works as a wireless network on my Macbook. It won't connect with my Windows Visa PC. Message reads: "settings saved on this computer for the network don't match requirements of the network.

I just installed Airport Extreme. It works as a wireless network on my Macbook. It won't connect with my Windows Visa PC. Message reads: "settings saved on this computer for the network don't match requirements of the network." I seem to need to enter a security key/passphrase to connect to the PC. Where do I find them?
Thanks for your help.

I assume that you have Wireless Security enabled on your AirPort's wireless network. The issue maybe that the PC is unable to use the WPA password itself and will require using the Equivalent Network Password instead.
To get this password, you will use the AirPort Utility from the MacBook:
Start the AirPort Utility > Select the AirPort base station > Manual Setup
Now, before doing anything else, go up to the utility's menu bar at the top of the screen, and then, choose "Base Station," and then, Equivalent Network Password from the drop-down menu. You will see two items: 1) WPA Password, which should look familiar to you, and 2) WPA Pre-Shared Key. It should be a long hexidecimal set of numbers and letters. Jot down this second item.
You will want to use the value you just jotted down when entering the password from the Windows Visa PC.

10.4.11 won't install after download "disk does not meet requirements"

After successfully upgrading to 10.4.6, I was able to download (after three attempts) the upgrade to 10.4.11. When I went to install it, it said the volume I picked (the one the OS is on and just upgraded to Tiger) did not meet the requirements and had the red exclaimation point on it, as did all the other volumes. There is about 8.5 GB of free space on this volume. The upgrade was from the support website and was for the power PC, not the intel. What could be happening?

Hi BDAqua,
This is the only discussion that repeats the "disk does not meet requirements" message I'm getting. I downloaded the combo and get that message. These are my specs:
Machine Name: Power Mac G5
Machine Model: PowerMac7,2
CPU Type: PowerPC 970 (2.2)
Number Of CPUs: 1
CPU Speed: 1.8 GHz
L2 Cache (per CPU): 512 KB
Memory: 3 GB
Bus Speed: 900 MHz
But I can't seem to find any requirements documentation that explains why my PowerPC won't take this upgrade. It's my son's computer and one of his favorite games just raised its req's to 10.4.6. So I went hunting (software update gave me nothing) and found the combo. Any advice appreciated.

I have a G5 and bought and upgraded to osx 10.5. now i need to upgrade to 10.5.6 or higher, but when i download and try to install, i get message "this volume does not meet requirements for this update".

i am trying to sync an ipad to a power mac g5. i bought and upgraded to osx 10.5 and have tried to download and 10.5.6 or higher, but i keep getting same message: "you cannot install mac os x update on this volume. this volume does not meet requirements for this update". help!

Mac OS X 10.5.8 Combo Update
Java for Mac OS X 10.5 Update 5
To me, in all such updates, goes without saying maybe: backup, repair permissions, repair your drive (Disk Warrior does more reliable and thorough job, and it comes out to pennies if you don't wait until needed). Clone your system so you can restore or use the backup - just in case.
I'd even do a fresh format after your clone is done and do a full OS clean install and update, and then a quick import from Setup Assistant.
Mac computer with USB 2.0 port
Mac OS X v10.5.8 or later
iTunes 10.2 or later recommended
(free download from www.itunes.com/download)
iTunes Store account
Internet access
I'm going to assume there is something with the partitions on the drive, partition table most likely, though I know I've seen others with that error message - doesn't really point to cause, rarely does (make sure latest firmware update etc is sometimes included but again, we know that isn't why).

FC Express HD doesn't install regardless of meeting min system requirements

hi. Has anyone else had this experience? I've tried to install FCE on my system - power mac G4, OS X 10.4.7, 867 MHz Processor, 640 MB SDRAM. all of which meet min system requirements. But it won't install. On the install screen, it gives me livetype and its media, and soundtrack and its media as options to install, and I did in fact install them but FCE is always grayed-out.
Any ideas? Many thanks.
bdunn

Which version is this, 3 or 3.5? Which computer is this exactly? Is it running an upgrade card? You should contact Apple if you have an installation problem.

My itunes won't install the new itunes. I keep getting error messages that seem to be linked to MobileMe service which I don't even know what it is.

my itunes won't install the new itunes. I keep getting error messages that seem to be linked to MobileMe service which I don't even know what it is.

Read this:
iTunes 11.1.4 for Windows - Unable to install or open - MSVCR80 issue

I purchased Adobe Acrobat Pro XI for my iMac (Mavericks 10.9.4), downloaded it and have attempted to install it 10 or more times. I have done all the usual maintenance steps (repair permissions, repair disk, etc) and it still won't install. All goes well

I purchased Adobe Acrobat Pro XI for my iMac (Mavericks 10.9.4), downloaded it and have attempted to install it 10 or more times. I have done all the usual maintenance steps (repair permissions, repair disk, etc) and it still won't install. All goes well until the installer gets to "Running Package Scripts" then it stalls or hangs up and does not finish the installation. It runs and runs and runs. It never finishes. I wind up having to force quit the installer. Can anyone point me in the right direction?

Hi jtento ,
Kindly enable the Root Account for the MAC and then try the installation there (in the root account). Please find below the URL to enable the root account.
OS X Mavericks: Enable and disable the root user
Thanks,
Vikrantt Singh

AAM Won't Install - Admin Rights Required

Hi Folks,
Win7 64bit.
I've just signed up for Creative Cloud and am trying to install the AAM so I can access a few Adobe installers and get setup. I just crossgraded from Photoshop 5 CS and Dreamweaver, both of which previously installed no problem.   To access CC applications, you have to download and install the AAM.   When installing, it tells me admin permissions are required.   I've tried right-clicking and running as administrator - same error.   I've tried to run the MS fixit tool - no change.   I've tried to install Adobe Air, it won't install - it hangs on the EULA screen by opening more of the same screen over and over.
Can anyone point me in the right direction?   This is a new-ish machine and nothing has changed on it since installing PS CS5 and DW a few months back.
Many thanks in advance,
Rob

Hi Taurn,
The issue seemed to be resolved until I tried to open the AAM today, when it began again to do it's self-update process, and again it's failing due to admin priviledges.      I have a trial of LIghtroom that was the work around until it was added to the Creative Cloud offering - and now it's expired, and I can't install through the AAM because it won't, again, update itself. I've tried all of the suggestions found on the forum - firewall off - entry in the firewall for PDAPP.exe, new Admin account on my system.
Would you have any suggestions for me? I simply want to use the software as it was intended.
And I'm going to miss a deadline while I try to get this working again.....   I will be glad when the Creative Cloud (brilliant idea on paper) system works as it should.
Thanks in advance for any help you can offer.
Rob
EDIT: (removed - sorry for the whiny tone - just frustrated)

I'm having some problems wiht Firefox, for example; Youtube isn't loading right, Facebook won't let me send messages, search up people, and this website i made wont load right also. I've re-installed and updated it but still the same problems. Any help?

I'm having some problems wiht Firefox, for example; Youtube isn't loading right, Facebook won't let me send messages, search up people, and this website i made wont load right also. I've re-installed and updated it but still the same problems. Any help?

Because I know enough to be dangerous... I was trying to extend the two outside columns down.... Instead of just using faux columns which I have fixed since I posted the question.
The other link problem is the left sidebar links. When you go to the event photos page I have a repeat of the sidebar links that are on the newsletter page. I used named anchors on the newsletter page to link to the particular article. From the Event Photos page the links look like this:
<a href="1112Visions_Iss1.html/#puzzle" target="_self">[Puzzle]</a>
The problem I am having is that some of these go to the newsletter page and the anchor and some do not (I get an error message saying it can't find the page). To add to the problem is that when we choose say the President's Message, when it goes to the newsletter page and the correct anchor, the newsletter page is missing all the links to the graphics... the photos are missing the graphic for the faux columns is missing. It makes no sense. When I preview the newsletter page from Dreamweaver everything shows up fine.
I do not know if all of this is being caused because I haven't posted this stuff to the site or what. I've tried re-booting both the browser and Dreamweaver, dumping the cache and still the same nonsense.
Got any ideas?

Facebook - won't install, don't meet requirements?

Similar Messages

Maybe you are looking for