How video encoder continunously
Hello everyone!
I have a ADSP BF533 EZ kit lite and labview embedded for blackfin 2.5 module. I would connect Analog video input(composite video) and capture video frame then display on the my car GPS navigation with A/V input by running Videoecho example.
I was successful to build this example and i can see video displaying on the navigation. But something i would know more:
1. the video displayed is not continunously. I can see when i reduce the time delay for display it can change displaying faster. but it alway dispeared a blank frame before starting new frame.
2. I am thinking that mean when Video Encoder actived, Video decoder was not actived? Am i right?. I want to display continunously the video. how i can do?
3. Could i add any image processing algorithm in catched frame buffer then redisplay on the display?.
Here is code for pepople viewing.
Thank you so much for attention and please post your idea if it is possible!
Do Van Lam!
Attachments:
VideoGlobal.vi 5 KB
VideoEcho.vi 55 KB
VideoCallback.vi 6 KB
Hello !
It is me again!
I would like to ask anybody that can i use BF_VideoEcoder(decoder)_enable(disable) for ADSP BF537 EZ kit lite. And can i config PPI0 for decoder and PPI1 for Encoder by using AV EZ extender board? beacause ADSP BF533 has only one PPI so that is might be the reason in my above post.
I have ever test with VideoEcho example for ADSP BF537 EZ kit lite by creating new project and config hardware for BF537 EZ kit lite and copy code to new VI and modify LED on/off control VIs for BF537. but te video out but dit not apeared.
Could anybody help me to solve this problem?
Thank you very much!
Similar Messages
-
How to det codec for FLash 8 Video Encoder - MP4 files
HI! How can I get Flash 8 video encoder to accept mp4 files?
when I try open
it I receive an error message.
"You Won't be able to encode this file. Your computer doesn't
have the
necessary codec or the file is corrupt"
Do I find this codec at Macromedia or somewhere else?
PaulPaul wrote:
> HI! How can I get Flash 8 video encoder to accept mp4
files? when I try
> open it I receive an error message.
>
> "You Won't be able to encode this file. Your computer
doesn't have the
> necessary codec or the file is corrupt"
>
> Do I find this codec at Macromedia or somewhere else?
>
>
> Paul
HI! I got it. I dn the codec pack
(Cole2k.Media.-.Codec.Pack.V6.0.7.-Standard). -
Anyone know how to encode video files with 5.1 sound
So now that TV officially accepts and handles 5.1 sound....
Does anyone know how to encode their video files to include 5.1 audio?
(assuming that ones video files contain audio that is 5.1 from the original source)Saw this somewhere:
Ok, I managed to get Dolby Digital from a Video file. The steps are very easy:
Create an mp4 from your DVD or other source with Handbrake or Visual Hub - Audio Settings are not important
If you are ripping a DVD then open Mac the Ripper, choose Chapter extraction, open streams and select the Audio File you want to be extracted
You will now need Quicktime Pro
Open both files (the mp4 and the ac3) in Quicktime. Copy the ac3 stream and paste it to the mp4 file
Save the file as a MOV movie
Import it in iTunes
That was it!!!
I am now trying to figure out how to extract ac3 audio from mkv files... -
How big a drive for 3 hours of video encoded with animation codec?
Sorry if this seems a strange question - but I've run out of fingers and toes to count on.
I'm planning a video project that will have approx three hours of selected video to work with. Will be cut down to approx 90 minutes.
The video will be include a lot of chroma keying and also be graphic heavy. Many alpha channels.
I have determined the best work method is to upload the video using the Apple Animation codec. I am reliably informed that said Animation codec is a hungry bugger and eats up drive space.
Can anyone with more toes and fingers than me give me a ballpark for how big an external drive I should budget for this?
So to recap that's a a minimum of three hours of video encoded using the Apple Animation codec plus all the graphics, audio and rendering.
Many thanks.
A.SThe Animation codec isn't an editing codec. You'll have a DICKENS of a time trying to work with that. Besides needing VERY fast drives...I'm talking a 4-5 drive RAID with 300+MB/s throughput (Firewire won't cut it...eSATA would be pushing it..thunderbolt? Pushing it)...it'd still stutter on playback. No one edits with that codec. I mean no one. It's a good way to transport media LOSSLESSLY, but when editing...best to use an Editing Codec. As Michael said, ProRes 4444 would be good...even ProRes HQ is good enough quality. I deliver shows to air in that codec.
-
How to access all camera feeds on Axis M7014 4-port video encoder with one IP address
I am trying to interface to an Axis M7014 (4-port) video encoder through IMAQdx. This video encoder has 4 channels of video at one IP address.
I can see this video encoder in MAX when I hook it up, but since the encoder only has one IP address for all 4 channels, MAX only gives me access to the first camera channel. I cannot figure out how to address cameras 2-4.
NOTE: I can use VLC or something similar to access all 4 video channels, and the way I do this is by specifying a camera parameter in the rtsp:// addressing string. For example:
rtsp://172.24.0.164/axis-media/media.amp?camera=2 // get the video from camera #2
But I can't figure out how to do this in LabVIEW. I'm assuming there must be a way, though. This can't be the only multi-port video encoder out there.I found that
Configuring Multiple Ports (Windows XP only)
was referenced in this note http://download.ni.com/support/softlib//vision/Vision%20Acquisition%20Software/February%202014/Visio... .
But I`m not sure it is helpful, you can try it. -
How do I completely uninstall Flash 8 Pro & Flash 8 Video Encoder
I have Flash Pro 8 & Video Encoder 8 as well as Flash 10
on my Mac and want to completely uninstall, including preferences,
etc and reinstall. Can someone help me with the steps involved...
Thanks!You'll need to go back into Flash and build the links into the buttons before you create the swf's. Look in the Flash help docs regarding the getURL function as far as the code you'll need for linking. If you have problems, post in the Flash AS1 and AS2 forum.
Beyond that, don't be surprised if some feedback arises here regarding using Flash buttons. -
Flash Video Encoder Version Update
I have version 1.0 of the Flash Video Encoder. This came
bundled with Adobe Web Bundle (Macromedia Studio 8 - including
Flash Professional 8 and Adobe Creative Suite 2). I need version
1.2 or above in order to include metadata so my .flv files will
play in Captivate and on web pages. How can I get an upgrade of the
Encoder?You are mistaken about that I think. There is a Flash Video
Exporter for MX 04 that can go up to version 1.2. The Flash Video
Encoder that comes with Flash Pro 8 only goes to 1.0.
http://www.adobe.com/support/documentation/en/flash/mx2004/readme/fmxpro2004_video.html
http://www.adobe.com/products/flash/flashpro/productinfo/encoder/
So, does Captivate say it needs V1.2 of the Exporter or the
Encoder? I don't have Flash MX04 so I don't know the
difference. -
I'm trying to convert a 4.5 minute *.avi to *.flv and am
having some difficulty. Flash Video Encoder says I have about 15.5
hours remaining (am 0.5 hours into the process). That seems wholly
unreasonable given the fact that it took me all of maybe 5 minutes
to save it as an XviD-encoded *.avi with VirtualDub...
Any ideas as to how I can speed this up?I'm having a similar problem - but my issue has to do with
why the time to encode on my Mac Pro is slower than on my
associate's Power Mac G5.
I'm using the Flash 8 Video Encoder to convert .mov files to
flv files on a group license. On my station I have the following:
Hardware Overview:
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 12 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP11.005C.B08
SMC Version: 1.7f10
I've got 151 GB available on my system drive.
Presently, it is taking me approximately 2 hours 45 minutes
to convert a 6 minute 26 sec mov to a flv with custom settings of:
Max Date Rate: 300 kbps
Frame Rate: Same as Source
Audio Data Rate: 48 kbps (mono)
500 x 333 pixels.
HOWEVER, on an associate's computer he is able to convert
under the same specs, same files, etc. in 1 hour 40 minutes.
His computer specs are:
Power Mac G5
Processor Speed - 2.3 GHz
2-CPU's
L2 Cache - 1 mb per CPU
Memory - 16 GB
Bus Speed 1.15 GHz
My computer has much more powerful processor, so we're
confused why it's taking longer on my computer.
I also have a second internal drive but presently the
programs and source file are on my system HD. Someone suggested
that I should try to make sure that the Video Encoder has max RAM
allocated to it as well as having the scratch disk and cache set to
the second internal drive. I don't know how to do this or even if
it's possible but looking for advice and suggestions on how to
better optimize the Video Encoder and would appreciate any help
with this ASAP.
Thanks! -
From Adobe home page -> Support -> Document -> Flash
I found a "Flash Video Encoder User Guide" talk about this
Flash Video Encoder. But throughout the Adobe web site, I can not
find this product. Is it part of other product or it has another
name?
And how to buy/get it?
Thanks.It's part of the Flash Product.
-
CS3 Flash Video Encoder no sound
I have been using the Macromedia Flash FLV encoder for a very
long time, but now that I have upgraded to the CS3 Flash Video
Encoder the video gets encoded but the audio is always missing.
All my settings are the same as they always were and when I
encode an AVI to FLV the audio is missing. How do I fix
this?I to am having the same problem with the flash encoder. Added
a wmv file and a mov file to the queue and I get the same results.
I do however see the first frame of the movies. Cannot set in and
out points because the first frame displays while scrubbing.
Model Name: MacBook Pro
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Memory: 4 GB
Adobe suite CS3 - all updated. -
Flash Video Encoder - Sizing Video
Hello
I have an uncompressed video at 720x486. I need to encode it
to Flash video at 640x480. When I import it into Flash Video
Encoder, I use the custom settings to output a 640x480 movie at
30fps and 550kbps using the VP6 codec.
Flash video outputs a 720x486 movie.
What am I doing wrong?
http://www.dorseygraphics.com/forumphotos/flashvideo.png
Thanks,
---------------------SI've never had a problem with videos not being resized... and
many times
I've made video thumbnails. How are you determining the
output is incorrect
anyway? I'd guess it is your method that is wrong - if the
encoder did not
resize properly this question would come up daily...and it
doesn't.
Dave -
Head Developer
www.blurredistinction.com
Adobe Community Expert
http://www.adobe.com/communities/experts/ -
How to encode FCP files to Windows Media files by using Discreet Cleaner?
Do you know how to encode from FCP to Windows Media files in Discreet Cleaner 6.0?
Which is the right settings?
I got errors when I tries
In beforehand thank you very much for your answerHello Mikey
I have put up the following in the settings in Cleaner 6.0.1:
SETTING
Windows Media
OUTPUT:
Windows media
TRACKS:
Video media will be encoded into the output file
IMAGE:
- crop: manual
- image size: 320x240
- constrain aspect ratio: 4:3
- deinterlace: auto
Sharpen: radius: 1.5, amount: 50
Adaptive noise reducwe: mild
ADJUST:
- Gamma: 15
- Brightness: -5
- Contrast: 5
ENCODE:
- Windows Media Video V7
- Frame rate: 24 fps
- Insert Key frames: every 300 frames
- Video data rate: limit to 400 kbits/sec
AUDIO:
- Sample rate: 44.100 kHz
- Data rate: 48.0 kbits/sec
- Channels: stereo
BATCH> set default destination- her har jeg valgt en folder på harddisk
STATUS
- "Ready"
PLAY
I get the following message after to played:
"You need to clear the status and/or change settings for the media to begin encoding"
What is wrong with the settings or status?
Kind regards
mary Ann -
Hai.
I am developing a video chat application in flex. Can anbody
help me in the video encoding part?
I need the video to be encoded using ON2VP6 or H264 to get a
better quality. How it can be done live using flex?
Thanks,
VivekVijayanThe problem is, you need a clientside technique to encode the video-chat-stream with a useable codec, cause the client/user have to upload this video(chat)-stream to the server, mostly with a small user bandwidth.
Actually flash supports only this standard codec for encoding the user video input, wich requires a high bandwith and represents still a real bad quality.
Thats a bad fact for adobe, cause this should be natural for such an "media software/system".
Anyway, someone has a solution for encoding the clients webcam input with a common codec before streaming to the media-server? -
Flash 8 video encoder + SWF
Hi,
I need to convert some video file with the flash 8 video
encoder but i need an SWF output instead of a FLV. I know FLV is
the best for internet use but we can't integrate those type of file
in director so I really ned a swf file. I was wondering how could I
do it ...
II've tried to import the FLV in Flash 8 as an embedded video
but as the warning said the audio is not synched with the video
when i export it. Anyone have an idea how could I export a SWF
without beeing linked to the FLV ??
Thanks,try to play FLV file?
download & install FLV player,
try this:
http://www.download.com/FLV-Player/3000-2139_4-10467081.html
expecting a SWF file?
- import your flv into a flash movie & publish it -
Flash 8 Video Encoder - Optimizing Conversion Time
I'm using the Flash 8 Video Encoder to convert .mov files to
flv files. On my station I have the following:
Hardware Overview:
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 12 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP11.005C.B08
SMC Version: 1.7f10
I've got 151 GB available on my system drive.
Presently, it is taking me approximately 2 hours 45 minutes
to convert a 6 minute 26 sec mov to a flv with custom settings of:
Max Date Rate: 300 kbps
Frame Rate: Same as Source
Audio Data Rate: 48 kbps (mono)
500 x 333 pixels.
HOWEVER, on an associate's computer he is able to convert
under the same specs, same files, etc. in 1 hour 40 minutes.
His computer specs are:
Power Mac G5
Processor Speed - 2.3 GHz
2-CPU's
L2 Cache - 1 mb per CPU
Memory - 16 GB
Bus Speed 1.15 GHz
My computer has much more powerful processor, so we're
confused why it's taking longer on my computer.
I also have a second internal drive but presently the
programs and source file are on my system HD. Someone suggested
that I should try to make sure that the Video Encoder has max RAM
allocated to it as well as having the scratch disk and cache set to
the second internal drive. I don't know how to do this or even if
it's possible but looking for advice and suggestions on how to
better optimize the Video Encoder and would appreciate any help
with this ASAP.
Thanks!This is the forum for the Flash Media Live Encoder - please
post issues related to the Flash Video Encoder to the Flash
Professional forums
Maybe you are looking for
-
External Display won't work with boot camp updates?
I'm using Boot Camp 4.0 with the latest updates - on Windows 7 x64. I've been using my Thunderbolt to DVI adapter for months now on the same monitor (la2206x) and suddenly it doesn't work - forcing the resolution to 640x480, which, really is a lie be
-
My Itunes won't update normally
This is a problem I've had for years, but I'd like to see if there's a fix. If I use iTunes -> Check for updates... in the menu bar, I get the message A new version of iTunes (12.1) is available. Would you like to download it now? When I select the "
-
Item Level Security and url not working
Hi, I have a SharePoint 2010 web application for internal users with windows authentication that contains a infopath forms library with content approval enabled. This web application is extended as extranet for external sites and it's using forms aut
-
Disk image couldn't be opened because it was an "Illegal Seek"
I'm trying to download the trial and it says the disk image couldn't be opened because it was an "Illegal Seek" Mac OS X 10.8 - Mountain Lion
-
Problem with synching iPod 4th gen Nano to iTunes Vista 8.02
Not had a problem with this Nano - sometimes hangs on first play nothing a reset doesn't cure - til now. For some reason iTunes decided a Smart playlist (To delete - if I rate one star it lists it there) was missing when it was there, just disappeare