Faces Error

Hello.
I have an big Problem with Faces. After iPhoto scans my Library i selected 5 to 10 Pictures from one Person an gives them a name. After that i click on the Face botton on the left top on iPhoto. In the corkboard i see the first picture and the name "John" But when i open John´s Faces there is no Picture inside.
I test more then 4 names and 20 Picture but nothing happen.
Next I think its a defect Face.db so i go to /Users/username/Pictures/iPhoto Library/ Inside there i delete the face.db. After I start iPhoto again all Face Infos where deleted. After rescan the database i test it again but i have the same error.
In the corkboard i see an clip from my named pictures but when i open on there is no picture inside
Can somebody help me?
Requards
Florian

Welcome to the Apple Discussions.
Start with the troubleshooting basics:
1. Delete the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
2. Repair Permissions using Disk Utility
3. Create a new account (systempreferences -> accounts) and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.
Regards
TD

Similar Messages

How to handle OK button in faces error message

Hi everyone,
Iam using Jdev 11.1.2.0. I have a scenario where faces error message will be displayed . After clicking ok button, some validation should be done . If iam using popup with dialog, i can handle my requirement using java script but now my scenario is with faces message . Kindly suggest me how to get hook for the button OK in faces message. Thanks in advance.
Regards
Alekhya

As Frank said, it does not allow customization.Instead of Faces message you can use an popup with dialog.use dialog listener in ok button
like
public void dialogListener1(DialogEvent dialogEvent)
    if (dialogEvent.getOutcome() == DialogEvent.Outcome.ok)
     // write your custom code for ok event
    } else
      // write your custom code for cancel event
read more on http://www.techartifact.com/blogs/2013/03/handling-ok-and-cancel-button-in-afdialog-using-popup-in-oracle-adf-by-dialogl…

Dsiaplaying faces error messages, retaining screen details

Hi Guys,
When i try to display faces error messages my page is getting reloaded again and hence im losing my details selected in the screen, how do i display error messages by retaining the screen selection details, the page uses reference data which also gets loaded when it refreshes for displaying error message, i dont want this to happen also, I just want to retain the screen details..

I am not sure why you would be loosing information. Make sure that you do not immediate=true set on the command button or link that you are using to submit the form. As far as display an error message you can do the following
FacesMessage.SERVERITY_ERROR display an error message in red
public static void addMessage(String dispMsg) {
FacesContext context = FacesContext.getCurrentInstance();
FacesMessage faceMsg = new FacesMessage(FacesMessage.SEVERITY_INFO,dispMsg,dispMsg);
context.addMessage(null,faceMsg);
}

ADF FACES: error when deployed on Tomcat 5.0.28

I just deployed my web app (from EA14) onto Tomcat 5.0.28. After some tweaks on the deployment profile, it works except for one error that I never see when it runs under the embedded OC4J app server. I now get this error on some of my pages:
Apr 2, 2005 3:45:34 PM oracle.adfinternal.view.faces.io.DebugHtmlResponseWriter
_errorWithComment
WARNING: Illegal HTML: cannot put a <img> element in a <table> element.
Has anyone else seen this error? Any ideas what causes it and why it doesn't show up under OC4J?
Thanks.

There've been issues when running in the embedded OC4J server where logged messages don't appear at all - I suspect this is happening on both environments, but you're only seeing the message on Tomcat.
If you look in the HTML, you'll see a  comment where the problem occurs, and you should be able to trace that content back to the components you're using at that spot. Could you let us know what combination of components produces this error? (The problem is exactly what the error message says: HTML does not allow <img> directly inside of <table>, but that's what got produced.)

EA12 Faces: Error in client state and verbatim tags

When we switch our ADF Faces (EA12) application state method to client, we are receiving the stack trace below. All screens work correctly when the STATE_SAVING_METHOD is set to server. We've noticed if we remove the verbatim tags out of our JSF pages, we do not receive the error.
It seems this is a problem with the JSF spec per the Sun JSF forum. Is this correct?
java.lang.IllegalArgumentException: type mismatch
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java)
     at com.sun.faces.el.PropertyResolverImpl.setValue(PropertyResolverImpl.java:178)
     at com.sun.faces.el.impl.ArraySuffix.setValue(ArraySuffix.java)
     at com.sun.faces.el.impl.ComplexValue.setValue(ComplexValue.java:171)
     at com.sun.faces.el.ValueBindingImpl.setValue(ValueBindingImpl.java:234)
     at com.sun.faces.lifecycle.RestoreViewPhase.doPerComponentActions(RestoreViewPhase.java:196)
     at com.sun.faces.lifecycle.RestoreViewPhase.doPerComponentActions(RestoreViewPhase.java:189)
     at com.sun.faces.lifecycle.RestoreViewPhase.doPerComponentActions(RestoreViewPhase.java:189)
     at com.sun.faces.lifecycle.RestoreViewPhase.doPerComponentActions(RestoreViewPhase.java:189)
     at com.sun.faces.lifecycle.RestoreViewPhase.doPerComponentActions(RestoreViewPhase.java:189)
     at com.sun.faces.lifecycle.RestoreViewPhase.doPerComponentActions(RestoreViewPhase.java:189)
     at com.sun.faces.lifecycle.RestoreViewPhase.doPerComponentActions(RestoreViewPhase.java:189)
     at com.sun.faces.lifecycle.RestoreViewPhase.execute(RestoreViewPhase.java:175)
     at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
     at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:90)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:197)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) - Developer Preview 3].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:61)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) - Developer Preview 3].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:672)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) - Developer Preview 3].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:378)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) - Developer Preview 3].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:869)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) - Developer Preview 3].server.http.HttpRequestHandler.run(HttpRequestHandler.java:288)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) - Developer Preview 3].server.http.HttpRequestHandler.run(HttpRequestHandler.java:120)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) - Developer Preview 3].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:299)
     at java.lang.Thread.run(Thread.java:534)

Adam,
Here is the JSF page. I'm not sure if you want the backing bean as well?
Thanks
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<%@ page contentType="text/html;charset=windows-1252"%>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f"%>
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h"%>
<%@ taglib uri="http://xmlns.oracle.com/adf/faces/EA12" prefix="af"%>
<%@ taglib uri="http://xmlns.oracle.com/adf/faces/EA12/html" prefix="afh"%>
<f:view>
<afh:html binding="#{backingBean.html1}">
<afh:head title="Page"
binding="#{backingBean.head1}">
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252"></meta>
<style type="text/css">
body {
background-color: #e7e7e7;
</style>
</afh:head>
<afh:body binding="#{backingBean.body1}"
onload="#{backingBean.resetTable}">
<af:panelPage title="Select a Record"
binding="#{backingBean.panelPage1}">
<f:facet name="menu1">
<af:menuTabs binding="#{backingBean.menuTabs1}">
<af:commandLink text="Record"
binding="#{backingBean.commandLink1}"/>
</af:menuTabs>
</f:facet>
<f:facet name="messages">
<af:messages binding="#{backingBean.messages1}"/>
</f:facet>
<af:form binding="#{backingBean.form2}">
<af:table rows="25" emptyText="No items were found"
binding="#{backingBean.table}"
var="rowVar" value="#{model.data001vList}"
width="100%" banding="row" bandingInterval="1">
<af:column binding="#{backingBean.selectColumn}">
<f:facet name="header">
<f:verbatim>
Number
</f:verbatim>
</f:facet>
<af:commandButton text="#{rowVar.cffNum}"
binding="#{backingBean.selectButton}"
action="#{backingBean.selectRowFromList}"/>
</af:column>
<af:column binding="#{backingBean.datacolumn1}">
<f:facet name="header">
<f:verbatim>
Name
</f:verbatim>
</f:facet>
<af:outputText binding="#{backingBean.outputtext1}"
value="#{rowVar.name}"/>
</af:column>
<af:column binding="#{backingBean.datacolumn2}">
<f:facet name="header">
<f:verbatim>
ID
</f:verbatim>
</f:facet>
<af:outputText binding="#{backingBean.outputtext2}"
value="#{rowVar.cffAccount}"/>
</af:column>
<af:column binding="#{backingBean.columnBalance}">
<f:facet name="header">
<f:verbatim>
<b>Balance</b>
</f:verbatim></f:facet>
<af:outputText binding="#{backingBean.outputBalance}"
value="#{rowVar.cffBalance}">
<f:convertNumber pattern="$ ###,###,###,##0.00"/>
</af:outputText>
</af:column>
<af:column binding="#{backingBean.datacolumn15}">
<f:facet name="header">
<f:verbatim>
<b>Status</b>
</f:verbatim>
</f:facet>
<af:outputText binding="#{backingBean.outputStatus}"
value="#{rowVar.cffStatus}"/>
</af:column>
</af:table>
</af:form>
</af:panelPage>
</afh:body>
</afh:html>
</f:view>

Why do I face error 7 Windows error 193 when i try to reinstall my iTunes? I've tried few times uninstalling and reinstalling but it seems that it doesn't work.

Since yesterday, I failed to update the latest iTunes. Today i tried to open iTunes but it says iTunes were not installed properly. And this error 7 (Windows error 193) popped out. I tried to search the solution by people suggestions,which is uninstall all the apple program and reinstall it again. I tried few times but the same thing came out. What am I suppose to do for this problem?

So each time you have tried to install an older build you have followed the removal steps given in the second box of my user tip, or some similar process, that uninstalls all Apple software components, and cleans the folders those components would have installed to, rebooted, and then tried an alternate build?
Do you recieve any error messages during the installation? Have you, for example, tried the process outlined at Install Missing Components? If so which component will not install and what error message does it give you? I can point you in the direction of steps to generate installation logs if you wish. Actually, see my post in this thread: Can't install iTunes 12.1 on Windows 7 64-bit.
Which builds have you tried?
iTunes 12.1.1.4 for Windows (32-bit) - iTunesSetup.exe (2015-02-18)
iTunes 12.1.1.4 for Windows (64-bit) - itunes6464setup.exe (2015-02-17)
iTunes 12.1.1.4 for Windows (64-bit - for older video cards) - iTunes64Setup.exe (2015-02-18)
iTunes 12.1.0.71 for Windows (32-bit) - itunessetup.exe (2015-01-28)
iTunes 12.1.0.71 for Windows (64-bit) - itunes6464setup.exe (2015-01-28)
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
iTunes 11.4.0.18 for Windows (32-bit) - iTunesSetup.exe (2014-09-09)
iTunes 11.4.0.18 for Windows (64-bit) - iTunes64Setup.exe (2014-09-09)
Or something specific from OldApps.com?
What was the last build of iTunes that successfully ran for you?
tt2

Ipad 2 ios 5.0.1 stuck at apple logo black screen, subsequently cannot restore, face error 16XX in itunes.

i have encountered this problem even after 10 hours of troubleshooting various methods, when i turned off my ipad and when turning it back on, it would just hang during the white apple logo on the black screen and remain there with no sign of activity till i hold the lock + home button till it shuts down.
after several attempts, i tried to put it into recovery and restore firmware, it would get stuck at stage "preparing ipad for restore" after i click on restore ipad.
i have attempted:
dfu and restore, 1600 error
recovery and restore, 21 error
my ipad 2 is wi-fi only model running ios 5.0.1.
i can't think of anything else other than sending it to applecare. my ipad 2 was recently purchased in jan this year. any input would be greatly welcomed!

Just follow these steps. I am sure it will solve your problem.
http://support.apple.com/kb/HT1808?locale=en_GB&login=email

I can face errors in state property. how can i resolve this errors in flex 4.6?

<?xml version="1.0" encoding="utf-8"?>
<s:Group xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx"
width="118" height="118">
<s:layout>
<s:BasicLayout/>
</s:layout>
<s:states>
<s:State name="X">
<mx:AddChild position="lastChild">
<s:Label x="10" y="10" text="X" fontWeight="bold" fontSize="72" width="98" id="label1" height="98" textAlign="center"/>
</mx:AddChild>
</s:State>
<s:State name="O">
<mx:AddChild basedOn="X">
<mx:SetProperty target="{label1}" name="text" value="O"/>
</mx:AddChild>
</s:State>
<s:State name="OWinner" basedOn="O">
<mx:SetStyle name="backgroundColor" value="#42E303"/>
</s:State>
<s:State name="XWinner" basedOn="X">
<mx:SetStyle name="backgroundColor" value="#42E303"/>
</s:State>
</s:states>
<fx:Script>
<![CDATA[
public var used:Boolean = false;
public function reset():void
used = false;
currentState = "";
]]>
</fx:Script>
<fx:Declarations>

</fx:Declarations>
</s:Group>

Without knowing what the error is, then it might be a little difficult to help you.
But, my guess is that you put items in the States, which you don't need to.
You might want to review the documentation for Create and Apply States.

Row Navigation not possible after Faces Error Msg

Hi,
I have a pop up where form allows to add multiple rows so i do have navigation buttons(first, previous, next, last).
Once if any i/p requirement is not fulfilled, the error msg displays normally which was given in bean like JSFUtils.addFacesErrorMessage("......"); , the navigations button is not functioning even after giving the required i/p. Those buttons are bindings based.
I have created multiple records but navigation stops in the record where that error msg comes. How to solve?
Regards,
Ramz

As Far As I know to fill form in popup successfully you must set the partial submit of the input fiels to true on the form maybe that fix your problem too.

Interface face error

Just installed a pci gpib card with ni 488.2 software and 1.6 driver file. When I test the card it keeps coming up with a missing interface error. The computer I am installing it on has xp as the os. It seems that the computer and the gpib card are not properly communicating with each other. One last thing, when I go into the pci gpib properties I am missing the NI-488.2 settings screen. Thanks

Brian,
It sounds like this problem is more related to your GPIB software than with Measure. I recommend you post your question in the GPIB forum, where hopefully one of the several GPIB experts there can help you solve the problem.
Good luck, and have a nice day.
Darren N.
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Send email to unregistered users who try to perform password reset and face error.

Hi,
I am trying to configure FIM to send email to user when an unregistered user tries to perform reset without registering.
Mail him to register first and then go for reset. But, thing is the workflow i am trying to design for this is allowing to only select the requests where status is denied, but there is no way to compare it against the unregistered userlist.
Please help me out.
Regards
Divye

Hello ,
May be it's possible if you have users email imported on Fim service .
When a user try to reset his password and he is not register a workflow instance is created with a status DidNotExecute so you can create a set wich contains this workflow instance and MPR on transition In of this will triiger a notification Worflow .
You create a criteria-based membership set wihch select "workflow instance" object type that match all of the following confitions :
Creator is Anonymous User
Workflow definitions is "your Rest AuthN Workflow"
Workflow Status is DidNotExecute
For the Notification Workllow , you must use somethink like //target/target for "to" attribute .
Regards
Gaetan

BW: Error during Delete Overalpping requests from a cube 0PCA_C01

Hello Experts
For the past 1 week, I am getting the following error in a process chain when trying to do Delete Overlapping requests from a cube.
The error I am getting is:
The chain failed while deleting the overlapping requests from 0PCA_C01 with an error messages "Error when deleting requests for comparison request" & "Deletion of request REQU_DBC7DZ51QY from data target 0PCA_C01 failed"
CL_RSDRD_REQ_PHYS_DEL:REQUEST_DELETE RSDU_FACT_REQUID_DELETE SQL-ERROR: 0
reqdel_infocube_with_aggr-0PCA_C01 CL_RSDRD_REQ_PHYS_DEL:REQUEST_DELETE RSDU_FACT_REQUID_DELETE
Deletion of request REQU_DBCFVY9N1691OYQYNCMUGCSGM(290265) from InfoCube 0PCA_C01 terminated
Error deleting request REQU_DBCFVY9N1691OYQYNCMUGCSGM from InfoCube 0PCA_C01. Exception: Unknown error
Any suggestions on how to fix this problem permanently..i mean any SAP Note to be applied or any adjusting the database tables?
Thanks
Jyothi

Hi Jyothi,
This error usually comes because of presence of zombie ./ bad request. I would suggest you to check few of the tables and search for your request "REQU_DBCFVY9N1691OYQYNCMUGCSGM" in them if you are able to find it then delete that entry from there, there after you should not face error. Check if the request mentioned above is present in the below mentioned tables? If yes delete them from there.
RSREQICODS, RSTSODS, , RSICCONT, RSODSACTREQ.
Also check if the notes mentioned in the below thread are applicable in your case?
Error when deleting requests in cube
Thanks

Impossible to install any version on Windows 8.1 error 0x851A0019

Hi,
Can you help me please to solve this problem i had and try to fix for 3 days.
I try to install SQL Server 2012 Express Edition and i obtain this error message :
"Could not find the Database Engine startup handle : error 0x851A0019"
My OS is Windows 8.1
I also try to install SQLServer 2008 Express Edition and i have the same problem
But las year i installed with success on Windows Seven.
I dont understand where is the problem with Windows 8.1
I'm very frustrated againt Microsoft politics. We lost time for simple operations.
Thanks in advance

Hi,
Can you help me please to solve this problem i had and try to fix for 3 days.
I try to install SQL Server 2012 Express Edition and i obtain this error message :
"Could not find the Database Engine startup handle : error 0x851A0019"
My OS is Windows 8.1
I also try to install SQLServer 2008 Express Edition and i have the same problem
But las year i installed with success on Windows Seven.
I dont understand where is the problem with Windows 8.1
I'm very frustrated againt Microsoft politics. We lost time for simple operations.
Thanks in advance
Hello,
AFAIK This error mainly points to fact that account which you are using to install SQL server does not have complete permissions. Ofcorese error can be due to many reaosns
See if this link helps
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/6656d8ef-1df0-4e22-9e16-32ffb1754756/sql-server-2012-setup-fails-due-to-wait-on-the-database-engine-recovery-handle-failed?forum=sqlsetupandupgrade.
If not
What you should do is
1. Uninstall SQL server completely.
Uninstall all SQL Server components you can using Control Panel -> Programs and Features
Backup the registry.
Delete the following keys in regedit:
--HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server
--HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSSQLServer
Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall and delete all the sub-keys referencing SQL Server.
Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services and delete all the keys referencing SQL Server.
More details in below link(see answer by Yo yo yu)
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/4d6158a1-b601-428c-aad4-a1716e76de1a/install-sql-server-problem?forum=sqlexpress
Now after complete removal of SQL server is done.
See Hardware and software req for SQl server 2012 make sure you read all instrauctions care fully and meet it before installing express.
Copy the express edition files to local folder and run setup from there.RK on setup.exe and select run as administrator
If you are using domain admin account make sure to add that account as local administrator
If you still face error share setup log file as pointed out by Balmukund.
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

SQL Loader and Error ORA-01847/ORA-01839

Hi,
While using the direct loading in SQL-LOADER when we get the ORA-01847/ORA-01839 all the other records are getting errorred out. It goes fine with the conventional loading.
Should I use some parameters or anything to make sure that all the other records are not rejected when we get the ORA-01847/ORA-01839 error while going with the DIRECT loading.
Thanks
Jibin

In internet I found this short message:
“AL32UTF8 is a multi-byte characterset,that means some characters are stored in more than 1 character, that's true for these special characters.
If you have same table definitions in both databases you likely face error ORA-12899.
This metalink note discusses this problem, it's also applicable to sqlloader:
Import reports "ORA-12899: Value too large for column" when using BYTE semantic
Doc ID: Note:563893.1”
By metalink, I can see the Note linked to a one Oracle Internal Bug for Oracle 11g.....
I'm waiting you suggestion... thanks very much in advance.
Regards.
Giovanni

APP Payment Proposal cancel Error

Dear All,
yesterday we face error while Running F110.
User Has run the F110 for the 52 Vendors among those 26 vendors got payment successfully and remaining vendor got failures.
after that we got status Tab as shown below
when we check the vendor master and invoice there is no problem (Vendor Block/Payment Block). when we check the payment
proposal we fond message as shown below.
Since it is urgent can any one please suggest what kind of Message it is.

Sreehari,
Did an ST22 dump get generated for this error? Can you check and post a screenshot of the dump?
Regards
PG

Faces Error

Similar Messages

Maybe you are looking for