Facing a Problem in Substitute a User in PRD system

Dear All,
I am facing a problem in User substitution in Business Workplace(SBWP), the following problem is occurring for four different user and they are falling under Three different categories in the same system.
Problem:
User_1 is taken leave for two days from 05-May to 06-May, then substitute for User_1 is assigned to User_2 for these two days, but the problem is after two days also the User_2 receiving the emails. I cross verified the table 'HRUS_D2' also, the date matches 05-May to 06-May for user 'USER_1'.
Category 1:
In PA000-STAT2 Field for the User 'USER_1', It is showing as Inactive.
Category 2:
In PA000-STAT2 Field for the User 'USER_1', It is showing that the User is currently active but after 31-May, the User Withdrawn the Job.
Category 3:
In PA000-STAT2 Field for the User 'USER_1', It is showing that the user is currently active.
All the above problem is occurring in Production system.

Hi Satheesh,
Please find the Screenshot for HRUS_D2 for the User assigned. User is active and also substitution too is in active stage.
HRUS_D2
Regards
Rajkumar Narasimman

Similar Messages

Facing a problem while creating voice user-profile in CME through GUI

Hi All,
We have implemented CME with extension mobility options to the users, right now we have configured all voice user profiles throgh CLI in CME and created ephone-dn and its working fine. When we are trying to do the same thing through GUI, we are able to create both user profile and DN profile, but when i tried to login with that user credentials in extension mobility it is showing authentication error. When i go through CME configure and fond that there only ephon-dn is created and voice user-profile is not created. And even we are trying to change the password through GUI it is not changing. Please check it and help me to resolve this issue.
It will be appriciated if i get the resolutio ASAP.
Thanks,
Nagesh,
+91-96633 10988

Hi,
Make sure you have the necessary authorizations to create a PCR in that system.
Also check if the PCR is open in edit mode in some other session.
Seems more like an authorization issue. Check that you are in development client and have authorizations.
Check with your basis team for authorizations for tcode PE02
Hope this helps,
Regards,
Shreyasi.

Problem in substitute

Hi all,
I am facing one problem in my workflow. Please help me.
If user substitute another user (user on the higher hierarchy) document is sending to substituted user twice for approval. ( 1 for user substitue him, another is at his level). That case user dont want twice. He needs once only.
If the user is defferent (substitute and next approve person) client wants to send two persons (one by one - normal procedure).
This case what i have to do. Give some sol
Regards,
Naresh

This is more of a question at business process level.
Short answer, don't susbstitute your manager if he/she doesn't want to approve things twice.
Another solution could be to check in your workflow if the person who previously executed the workitem is the same as the next step for approval, you can assume that it was the manager and therefor automatically approver the workitem and go to the next level.
But before you do this ask the business how many times this situation occurs, only if it s on a regular basis you should change the workflow.
Kind regards, Rob Dielemans

I am facing a problem in a crystal report which is based on Infoset query

Hi All,
I am facing a problem in a crystal report which is based on Infoset query.in the Cost Analysis - Planned vs. Actual Order Costs
There are two querys like Query: CO_OM_CA_20_Q1 and InfoSet: ZBPBI131_INFO_ODVR. I build infoset query based on sap best practice user guide but problem is not able to find CO_OM_CA_20_Q1
Best Regards,
Srinivas

Hi,
I would first of all suggest you don't open the same question twice. this looks like a duplicate to this entry:
Best Practices v3.31 - SAP InfoSet Query connection
Did you assign the queries and the infosets to an InfoSet user group and you assign the SAP account to it as well ?
Ingo

I am facing a problem in a crystal report which is based on Infoset query.i

Hi All,
I am facing a problem in a crystal report which is based on Infoset query.in the Cost Analysis - Planned vs. Actual Order Costs
There are two querys like Query: CO_OM_CA_20_Q1 and InfoSet: ZBPBI131_INFO_ODVR. I build infoset query based on sap best practice user guide but problem is not able to find CO_OM_CA_20_Q1

Please re-post if this is still an issue to the Business Objects Integration Kits - SAP Forum or purchase a case and have a dedicated support engineer work with you directly

Dear Mr./Mrs., I had an iPhone 4 , then I bought iPhone 5s , I faced a problem when I started installing any new application other than I already had on my iCloud , I was asked to enter my password of my apple account and I entered it correctly , then I

Dear Mr./Mrs.,
I had an iPhone 4 , then I bought iPhone 5s , I faced a problem when I started installing any new application other than I already had on my iCloud , I was asked to enter my password of my apple account and I entered it correctly , then I was asked to answer two questions , but I forgot the answers !! I click on forgot the answers , they send me check your email , I check my email and they send me the password that I have already entered not the answers of the questions ! How can this problem be solved ?! Hope to take my message into consideration.
Yours sincerely,
                         Hesham.

Welcome to the user to User Technical Support Forum provided by Apple.
For your issue...
See Here > Apple ID: Contacting Apple for help with Apple ID account security
          Ask to speak with the Account Security Team...
     Or Email Here > Apple Support iTunes Store Contact

Facing some problem while configuring Workflow Manager 1.0.

Hi,
I am facing some problem while configuring Workflow Manager 1.0. in my farm.
Scenario is,
I have installed and configured workflow manager in my farm, it was working well with no issue. But one of team member played with AD and deleted Farm administrator's entry from AD by mistake. So suddenly workflows get affected and stopped working.
Then I added administrator entry in AD, uninstalled the Workflow Manager and installed it again. But now while configuring workflow manager I am facing some issues that "Failure to adding user in BUILTIN\Administrative group. Please add it manually"
And after sometime it shows another error message that, "Starting service Service Bus Massage broken failed: Timed out has expired, the operation has not been completed"
If I go for services then "Service bus Message broker" service is not running properly (Its status is just showing "Starting") and don't starts.
I have also added the user in BUILTIN\Administrator, IIS_IUSER, WSS_WPG group of the machine from computer manager - user and groups.
Also given permission to databases, and assign role of sysadmin and dbcreator to user
I also tried following steps
1) Stop all services associated to workflows
2) Uninstalled workflow manager
3) Deleted all databases associated with workflows
4) Installed workflow manager and tried to configure.
But showing same error.
If I use another SharePoint server farm to configure workflows, there I am not getting first error of adding user to BUILTIN\Administrator group. but second error remains same.
We having SQL server and Active directory at another machine and FARM at another machine, if I use local admin for configuration of the workflows (as local admin can start any services) but entry of local admin is not Active directory so can not assign SQL's
sysadmin, and dbcreator role to local admin.
I am attaching snapshot of error for better understanding.
Your help will be very precious to me.
Thanks,
Rajesh
Rajesh Agravat

Rajesh
Check to see what the service accounts are being used for these Workflow Manager 1.0 services:
Service Bus Message Broker
Service Bus Gateway
Workflow Manager Backend
All of these should be running and your workflow service account should be running all of these. If any are still configured under the old service account, they'll need to be updated. Next, check to see what service accounts have access to the
Workflow Manager 1.0 databases:
SbGatewayDatabase
SbManagement
SbMessageContainer
WFInstanceManagement
WFManagement
WFResourceManagement
The Workflow Manager service account should be mapped as the DBO for all of these. if any are still configured under the old service account, they'll need to be updated.
Given the complete loss of the original workflow service account, and the resultant impact on security configuration throughout the workflow farm, I would recommend performing a re-installation. Do it thus:
Launch Workflow Manager Configuration Wizard
Select the Leave Workflow Manager Farm
Stop all workflow services (see above list)
Repeat steps 1-3 for each instance of Workflow Manager 1.0 Server installed.
Delete all Workflow Manager databases (see above list).
reboot.
Start new installation.

Facing a problem while doing DML Operations in Discoverer (Urgent!!)

Hi,
I am facing a problem in one of the discoverer report i am working on. I would appreciate if you could help me to to find a solution for this -
I am triggering a custom package from the Discoverer. This package is inserting the data in a custom table. As we can not directly put the DML statements in the discoverer 's package so i have defined that package as the Pragma Autonomous. The custom table that is being populated is a regular table (i.e not a Global temporary table). In the custom folder in Administrator i am just selecting the data from that custom table.
Problem- When i run the report from discoverer, the data is getting inserted into the custom table, that means the package is working properly but still the report does not show any data. May be the query being executed even before the data is inserted into the table. Can you please suggest what is that i am missing in this solution?
Few facts of the report-
1. I am using only one worksheet.
2. The package is inserting the data in the custom table so i don't see any problem with the package and triggering it.
Thanks for your help.
-Anshul

Hi Michael,
This is not really an update. The functionality of the report is simple - Based on the parameters selected in the report, the package will get the data from queries and insert into the table. now the data in the table can be different for different users based on the parameters. what my concern was,
Consider a case of 2 users using this report almost at the same time.
We are not using the temporary table so we will have to truncate the table every time the report is ran, before inserting the new data in it.
Now suppose user -A runs the report and during it processing the 2nd user runs it with some different parameters. Then the 1st user's data will be deleted from the table.
does it sound right?
I was trying to achieve this functionality by using following functionality but here also i am facing a problem -
Now i am not inserting the data in the table but i have created a view that does the same thing as it was done by package in the previous case. and in order to pass the parameters in the view i am using set_context. I have created a package that is triggered by discoverer report and in that package i am setting the context. now i am facing the following problems -
a. Does the Set_context set the context globally?
b. Do i need to clear the context at the completion of report?
c. If the answer of the question - b is yes then where can i place that clear_context in the discoverer?
Thank you so much for your help.
thanks
-Anshul

I'm facing a problem only for this account that whenever I purchase a ringtone after few hours it disappears from the sound and it happened with all the ringtones I purchased since 2 days. also when i visit the store from the same account to downlo

I'm facing a problem only for this account that whenever I purchase a ringtone after few hours it disappears from the sound and it happened with all the ringtones I purchased since 2 days. also when i visit the store from the same account to download the ringtones again i have to buy them again and again . Please try to fix this problem for me and refund my money back.

We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
There are lots of other posts on this forum about ringtones. If you want to contact iTunes Support then you can either use the 'report a problem' page : http://reportaproblem.apple.com
Or you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Facing a problem in update option in app store

I am an apple user, facing some problem in my apple iphone 4s is that i cant access update option in apple store. I am running with my updated software in my iphone 4s i.e. 6.1.2. Since I have updated the software in my iphone i m facing this type of problem. When I open apple store in my iphone I go to update option it shows me that it is being loading and suddenly it stops for being load and it does not appear a page infact it does not appear that what all application I have to update, it doesn't shows me at all, it only shows me the number of updates that is not yet installed.
Please help me out with resolving my problem as soon as possible giving me the reason that why it is happening with my iphone 4s. For furthur information i can provide you my apple id i.e. [email protected]

Basic troubleshooting from the User's Guide is reset, restart, restore. Try each of these in order.

I have just bought my iphone 4S 32GB from three weeks ago and 'am facing a problem that in the middle of my calls it suddenly says call failed and it keeps on doing it every call i make

I have just bought my iphone 4S 32GB from three weeks ago and 'am facing a problem that in the middle of my calls it suddenly says call failed and it keeps on doing it every call i make .. I Don't know what to DO Please anyone help me i've got OS 5.0.1 and it's factory unlocked i've boughted from USA and it was sent to me where 'am living now in Egypt ...ANy Helpppppppppp Pleasee

try general>settings>reset>reset all settings and start up as an new phone.

Facing some problems in creating a custom tabs in CRMD_ORDER Transaction

Hi Friends,
I am facing some problems in creating a custom tabs in CRMD_ORDER Transaction code in Solution Manager of SAP.
Actually my requirement is adding of two tabs(one is header & another is item tab) in the above Transaction, i was able to put one tab i.e header tab but i was not able to keep item tab. i found a badi CRM_CUSTOMER_I_BADI in which documentation was given & i processed in the same way.
For information i used the Badi CRM_CUSTOMER_H_BADI for header tab which i was able to add the tab & all functions like change, save working Good.
But i want how to add custom tab in which item details were to be attached.
i was done with the necessary SPRO settings(or Tcode CRMV_SSV) & able to see the 2 tabs thats it, but the functionality save is not working for the second tab & not saving in table CRMD_CUSTOMER_I (in this table there is one CI include where we added our item fields).
And also i had a doubt whether to use ALV or Table Control. And if possible can any one can sent me the screen design & the code for the above requirement in detail.
can any one who have knoweldge in Solution Manager & in the above Badi implementation can give me a right solution which will help me a lot.
Thanks a lot in advance.
Thanks
Ravi.
can any one give the solution regarding to the above one.
Edited by: ravikanth on Jul 23, 2008 8:13 AM

Hello Priyanka,
I have the same problem by using Service Ticket in SAP CRM 5.0.
Did you already solved this issue? If so, can you please provide the solution!?
How can I activate and check the transfer log?
Thanks and regards
Alex

Problems Setting Up Developer Users

I am having a problem setting up developer users and I am trying to determine if I am missing a step or if there is a configuration problem on my staging and production systems.
What I want to do should be very simple. I want to create a user that can create an application and see the information under the "Application" tab in the Navigator.
I have created the user using the following steps on 3.0.9.82 for Unix:
1. Create the user
2. Make the user a full administrator (rather than end user)
3. Make the user a member of the portal_developers group
4. Make the user's default group the portal_developers group
However, when I do this the user does not see the information under the
"Application" tab. The only way I can get the user to see the info under the
"Application" tab is to make him a member of the Portal_administrators
and/or DBA group. Both my staging and production boxes have the same result.
Does anyone have any thoughts or suggestions on what might be happening?

Thank you- I have read through that thread and can see some resonance with my issue.
My AOL emails work VERY fast with BB, in fact almost simultaneously received on PC & Torch " ping ping!"
This issue only raised its ugly head when I had 2 Torches replaced by my insurers.
Whilst the claim was in process I used a new Curve, loaded from backup on PC to keep emails going and of course phone & web facilities. ( I use the BB to power internet via bluetooth to my PC / laptop when living on a remote island with no phone lines or power supplies) All was fine. Swapping email accounts took a few minutes with the usual password confirmations for each AOL screenname etc.
Then the new Torches came back from insurers, and I tried to swap devices. Phoning & texting is fine. Al data and contacts swap over fine.
SETUP email accounts.............stymied every time. It says repeatedly that my user name/password is invalid etc etc etc
Have tried security wipes. Have tried setting up new BB ID & passwords on PC website. All is OK until I try to setup emails on the Torches. This has used up ridiculous amounts of time- all wasted.
I love the BB phones and the fast email push......in fact I recently bought a new Sony Xperia Z1 but sent it back because of wifi coverage meant no emails on that superb phone for lots of the time.
Good old BB I said..........I always get emails wherever I am. ( Rural Scotland has very patchy radio & wifi coverage)
Was about to purchase new Z10s just to get a bigger screen, but now I am averse to buying ANY BB phone again because this present mess means I may never get emails set up again. How nuts is that?
Many thanks for all help & suggestions..........boy do I need them!!
Kind wishes from West of Scotland
Fair winds and kind landfalls

I am facing a problem that Basic Excise Duty is not picking in Tcode.: J1IS

while doing STO. Our STO procedure is intiallyyPO with UB STO then MB1B with 351 movement type transfering stock from one plant to another plant. Next step is Tcode: J1IS here BED should pick automatically once i click on GET EXCISE INVOICE tab. then we go for JIVS and MIGO with 101 movement type.
I am facing a problem that Basic Excise Duty is not picking in Tcode.: J1IS .
we are not going through SD configuration and I mentioned evrything in Tcode J1ID

Chek SAP Note 951938 is applicable to you
Regards
Sanil Bhandari

I'm using an iPhone 4 after upgrading to iOS 5 i'm getting an error 1635 now i'm facing problems syncing my contacts and facing many problems, i have restored my iPhone but still i'm getting the same error

i'm using an iPhone 4 after upgrading to iOS 5 i'm getting an error 1635 now i'm facing problems syncing my contacts and facing many problems, i have restored my iPhone but still i'm getting the same error

Did you check your security software settings? eliminating conflicts from third-party security software.

Facing a Problem in Substitute a User in PRD system

Similar Messages

Maybe you are looking for