Facing Problems in Streaming Video over internet using FMS 3.5

I,am using FMS 3.5 to stream video over internet.This video will be a part of a website www.mywebsite.com . I have the webserver in my company. This webserver has the local LAN IP : 192.168.10.19 which is binded with a public internet ip 212.77.xx.xx .This website is hosted using IIS 6.0 on OS windows 2003 server with SP2
I created a swf name sample.swf from sample.flv file and gave it the rtmp address as follows:
rtmp://192.168.10.19/vod/_StreamingVideo_/sample.flv   (where _StreamingVideo_  is the instance on the server, and 192.168.10.19 is the LAN IP of server) ,and it worked fine and every one within the local company network could see the streaming video. Now i tried to replace this local address with the public address and the address became as follows:
rtmp://212.77.xx.xx/vod/_StreamingVideo_/sample.flv
After giving this public IP in the rtmp address i,am getting a message "Failed to load Flv from the address rtmp://212.77.xx.xx/vod/_StreamingVideo_/sample.flv" and as as result the video is not streamed and it only shows the progress bar on the link
www.mywebsite.com/VideoStreaming/Sample.html without loading the video. I have also checked the ports 80,1935,1111 on the server and they are open. Is there any problem with my rtmp address with public IP or any other reason ??. Please help me out in this regard because im realy stuck here.

Adding to my previous post this is the XML output i get when i try to access the fms admin console from local ip address i.e http://192.168.10.19:1111/fms_adminConsole.htm
<?xml version="1.0" encoding="utf-8" ?>
- <result>
<level>error</level>
<code>NetConnection.Connect.Rejected</code>
<description>Admin user requires valid username and password.</description>
<timestamp>2/3/2010 8:26:08 AM</timestamp>
</result>
but when i try to access fms admin console through public ip (http://212.77.xx.xx:1111/fms_adminConsole.htm) then it gives me the following :
Internet Explorer cannot display the webpage.
Any more suggestions Jay (because really ur the only one helping me out in this so far) ??

Similar Messages

  • Facing Problems in Streaming Video using FMS 3.5

    I want to stream .flv using FMS 3.5. The file is streaming on the company intranet but when it comes to internet, it is not streaming. Here is what im doing
    I,am using Flash Media Server with IIS 6.0 and Operating System windows 2003 server with SP2
    This server machine has a private IP 192.168.10.19(localhost) which is maped to a public ip 202.77.xxx.xx. This server is hosting a website www.mywebsite.com, where i want to stream this file. The exact path of the html page where this sample.swf will be contained is www.mywebsite.com/FlashStreaming/FlashStreaming.html
    Now the website is working fine but when i test the streaming of .swf file its not working. It is only showing a progress bar
    I used the following procedure to create the .swf from .flv
    I created an .swf with the name sample.swf, using FLVPlayBack component and given its source address as
    " rtmp://192.168.10.19/vod/_StreamingSample_/Sample(where Sample is an flv file) . After it i selected the option "Stream from Flash Media Server"
    I also created an instance named  "_StreamingSample_ " for vod on the server 192.168.10.19(localhost) in the Flash Media Administration Console
    Then I deployed it on the server with the local ip address 192.168.10.19. Now when i open the link www.mywebsite.com/FlashStreaming/FlashStreaming.html  from any client pc on the same company intranet as the server  it streams perfectly and i can also see it on the FMS Media Administration Console but when i type this link from any public pc using internet (i.e. outside my company intranet) it only shows a bar with play and pause buttons in it trying to connect to the server, and no video is streamed/shown . Is it due to the fact that im putting in the wrong address or there is some other reason behind this malfunctioning. I dont want to use Action Scripting so please let me know any solution which does not require action scripting.
    Note : The hosting server is within our company so we are managing it.

    Fraz,
    Remove the .flv extension from your address and give it a try:
    rtmp://202.77.xxx.xx/FlashStreaming/sample.flv
    should be:
    rtmp://202.77.xxx.xx/FlashStreaming/sample

  • Transmitting video over internet

    Hi ,
    iam developing an video conferencing application.
    iam able to transmit video using RTP in the LAN but not in the internet.
    what should i do to transmit the video over internet?.which ipaddress i need to use?
    please help me.

    hay guys,
    the problem of video streaming through internet is solved.....
    can any one have idea about converting H.263 format back to jpeg
    thanks in advance
    krishna

  • Streaming video over http

    Hello
    I need your help to understand how streaming over http works
    In our company we have about 600 users who will be able to view streaming video over http hosted in Internet
    We have 100 Mbps Internet link . What can we expect to happen in the network when there is contention for resources to access video on our network which delivers best effort service for video
    We have enough bandwidth 4 gigs in local area network to core , so there's no real bandwidth cruch
    How to differentiate or monitor bandwidth used for http streaming as against http normal traffic
    Sent from Cisco Technical Support iPad App

    One step closer:
    Changed the crossdomain.xml file (more permissive settings).
    Changed the encoding on FMLE to vp6. Working somewhat (don't know what I did to make it start streaming through hds).
    But at least now I can get the individual streams in the set manifest file to work:
    http://localhost/hds-live/livepkgr/_definst_/livevent/livestream1.f4m
    http://localhost/hds-live/livepkgr/_definst_/livevent/livestream2.f4m
    http://localhost/hds-live/livepkgr/_definst_/livevent/livestream3.f4m
    BUT when I try to play the streams through the set manifest file from http://localhost/liveevent.f4m I'm getting the following error:
    "The F4m document contains errors URL missing from Media tag." I'll search the forums to see if anyone else has come across this problem.
    I used the f4m config tool to make the file. These are the file's contents:
    <manifest xmlns="http://ns.adobe.com/f4m/2.0">
      <baseURL>http://localhost/hds-live/livepkgr/_definst_/liveevent/</baseURL>
      <media href="livestream1.f4m " bitrate="200"/>
      <media href="livestream2.f4m " bitrate="500"/>
      <media href="livestream3.f4m " bitrate="1000"/>
    </manifest>
    Thanks

  • Problem watching streaming video

    Hi
    I have problem watching streaming video. I was trying to watch an Apple Special Event called "It's Showtime" and I always get QuickTime window with white square, QuickTime icon in the meddle and moving progressing bar, no video or audio. I tried to change the QuickTime preferences using the following support link:
    http://seminars.apple.com/seminarsonline/wctest/apple/level2/wctest.html
    but I'm getting the same results.
    I tried the following: QuickTime Preferences / Advanced /Transport Setup: Custom/Transport Protocol :HTTP and Port ID: 80
    I'm using QuickTime 7.1.5
    Any help will be highly appreciated.
    iMac G5   Mac OS X (10.4.9)   1.8 GHz, 2 GB

    Repair permissions from your Tiger DVD. See if this helps. If not, try the following:
    To fix a QT related problem w/Safari, quit Safari & look in the /Library/Internet Plug-Ins folder (this is the Library folder at the root level of your HD, not the one inside your Users/user name folder).
    Try removing the VLC Plugin.plugin (if you have it) & QT Plugin.plugin files from this folder, & then relaunch Safari. If the problem isn’t fixed, a different plug-in may be to blame. Keep removing files from this folder (start with any third-party plug-ins that are present) until the problem disappears.
    Replace the plug-ins that don’t cause any problems.
    MacAddict Magazine...12/06
    If none of the above works and/or no one else suggestions works out, suggest you try to view the video from another browser. Safari isn't the only browser in town.
    Please post back with your results.
    Good luck!

  • Streaming videos over home network (KDE)?

    What do I need to be able to stream videos over home network in KDE?
    I tried to do it with ssh, both graphically and by terminal (Network>AddNetwork>ssh) and it didn't work. It tried to download the file. I was reading this is some kind of bug in the KDE.
    What else can I use to stream videos? Samba? Avahi?

    IMO, it would be best to abandon SSH completely. Its going add undesired overhead to this project.
    I use mediatomb to stream content to PS3 and HTPC running Arch: https://wiki.archlinux.org/index.php/Mediatomb
    If you just want to be able to access files locally from a remote server, use NFS to mount the desired remote folders: https://wiki.archlinux.org/index.php/NFS

  • IPad air has trouble streaming videos over Wi-Fi when Bluetooth is enabled

    With Bluetooth enabled several video streaming apps have trouble. Videos are intermittent and choppy. But when I turn Bluetooth off, the problem goes away immediately. I'm streaming videos over Wi-Fi, and I tried changing the channels of the Wi-Fi network, but nothing seems to help. I've also tried switching video streaming apps with no difference. Has anyone else noticed these problems with Bluetooth?

    Hey,
    I have the same problem!
    Apple, do you have an answer for this? How can we fix this?

  • Difference between Share Disks over WAN vs. over Internet using Bonjour?

    I would like to find out the Difference between selecting the "Share Disks over WAN" option only vs also selecting the additional "Share disks over Internet using Bonjour" option. Any info is greatly appreciated! Thanks!

    you can access drives plugged into your AirPort extreme base station from outside the network by typing in the IP address of the modem/base station in the "Connect to Server" dialogue on the Finders "Go" menu (or press Command+K when in Finder). You can get the base station IP by opening the AirPort Utility from your utilities folder, and click "manual setup" at the very bottom of the summary tab should be the IP address given the base by your modem.
    As long as you have "Share Disks over WAN enabled" when you connect using the IP from another location you will be prompted to authenticate to the AirPort Base station and if authentication is successful you will be prompted to mount a disk (the disk plugged into your AirPort base station should be the only available disk to mount).
    Keep in mind you must give out the Base Station password unless you allow guest connections to the disk.

  • Watching Videos over internet

    Hi,
    I recently purchased Nokia 5233. How can I watch videos over internet on this phone??
    For eg, I connected to youtube and upon clicking on some video, it displays 'connecting' after 30 seconds or so, it shows 'unable to connect'...is there any settings that needs to be changed?? please help me
    Thanks,
    Ravi

    You can also try the mobile youtube version
    www.m.youtube.com
    or
    www.youtube.mobi
    640K Should be enough for everybody
    El_Loco Nokia Video Blog

  • Streaming Video and Audio Using Flash

    Need help, streaming video and audio using Flash and/or
    Dreamweaver, want it to load fast and be very clear. It is
    imparitive that I have control buttons. Can any one assit me in the
    best methods to follow that will give me the performance variance.
    Jason

    Check out tutorials & samples here : http://www.adobe.com/devnet/flashmediaserver.html
    You can check even fmsguru.com : http://fmsguru.com/tutorials.cfm?tab=all

  • Firefox Problems Watching Streaming Video (Netflix, Hulu, etc.)

    I have Netflix, hulu, VH1, etc. accounts that I use currently to watch movies, t.v. shows, videos, etc. online (desktop) as my only means to any entertainment. I continually have problems with unexpected pauses, starts/stops, "getting stuck" & having to reboot.
    I use the free version of Advanced Care Systems to "maintain" my computer. In the last month, I must used the ACS several times a day in order to watch streaming video. Something is obviously wrong. The last time I tried Google Chrome to watch, I did not have the same issues as often.
    I love Firefox so I'd like to know what I can do to "fix" this problem.

    "ImacG5 (3.0)"
    I don't see that model listed.
    http://docs.info.apple.com/article.html?artnum=301724-en How to identify your iMac
    Please clarify which model iMac you actually have.
    =======================
    "I have multiple video viewers in addition to Quicktime Pro."
    Which ones. Latest versions?
    What type of internet service do you have? Cable, satallite, dialup or DSL?
    Have you contacted your ISP to determine if the problem is on their end?

  • Problem viewing streaming video in some wifi networks, but not others

    When I am at work (university), I can not view YouTube videos or video streaming from news sites such as cnn mobile on my ipod touch 2g.
    <m.cnn.com/videos.jsp?ckey-cnn)06#__1_>
    When I called Apple support, they had me reset-restore. I still had the problem. I went to the Apple store Genius bar and the problem no longer existed, the videaos downloaded and played from both sites!
    But at my diner and at work, I get the message, "This movie could not be played" in a popup box with an OK button. The same message appears if I use the YouTube application. I click on any video, and the same popup appears. In Cnn the popup is preceded by a shaded capital Q that looks like the blue Quicktime Q; in Youtube the pupup is preceded by a YouTube icon in gray with the "Tube" surrounded by the rounded rectangle, their icoon...
    At the Apple store the popup never appeared, and the videos downloaded and played.
    I have no trouble playing movies I have downloaded from iTunes.
    I did not have this problem when I initially got my iPod Touch, and I think it appeared after one of the last two system upgrades, but I am not sure.
    I am curious that it the problem happens at two places, my diner and at work.
    The speed of my wireless work network, as judged by the ipod app speed test is 9915 kbps download and 6971 kbps upload, so plenty fast.
    The first time I noticed this issue was with the application "At Bat Lite" which also won't play video highlights at work.
    I do not have WiFi at home
    Any thoughts about what would cause this lack of functionality apparantly only at some networks but not others?
    Oh, one more piece of data: at work a Macbook will play YouTube both on ethernet and using wifi...
    Thanks for any thoughts or suggestions,
    Paul

    It seems I have two networks available at work, one is behind our firewall, and I login to it. This is the network that I can't view streaming video. There is also a "Guest" network that I don't need to login to. This one works with the YouTube and the news site videos.
    Thus, I conclude there is a setting that WiFi network administrators can invoke that specifically can block streaming video on some protocols (whatever the ipod touch uses) and not others (whatever the Macbook uses). But the same router hardware supplying the Guest network does not block these protocols. Presumably this has to do with security on one side of the firewall(?)
    Anyway, apparently outside of the WiFi controls available in the ipod touch settings.
    Weird...
    Paul

  • Streaming video over WiFi very slow

    Hi, I started to dealing this unpleasant issue since I guess I updated to last firmware on my Apple TV. Now when I want to stream video from my MacBook or iPad over wifi, the picture is not fluent at all. It is cut (not sure about this word). When I connect my MacBook through ethernet cable, it works just fine. Apple TV is connected by cable to my network.
    Anyway I was able to stream practically any movie in any quality and it worked. No I cannot stream nothing at all! :/
    Does somebody experience the same issue?

    If you have an Apple Store nearby, book an appointment with the Genius Bar and get them to check it over.
    If you don't have an Apple Store nearby, take it back to the retailer and explain what's happening and see what they have to say.
    Or, you could call Apple Tech Support give them the details of the problem and see if they can suggest a fix.
    Before doing any of the above, you might want to try restoring the iPad to default settings and then set it up again (back up your iPad prior to this to preserve apps and date etc) to see if this rectifies the issue.
    Hope you get it sorted

  • Memory leak problems with loading videos over and over.

    I'm having memory leak problems with loading videos into a VideoPlayer aswell as FLVPlayback.
    What the flash should do:
    - Should be running for 7 days without having to restart the projector.
    - Interface that shows people around a 360 3D model with 5 different parts and at the stops it makes during the rotation you can click to zoom in on a location which plays a movie for that aswell.
    - Shows a video out of 5 parts for a 360 rotation in 3D in mp4 video (added each time and cleaned up, see code below).
    - Still images are used when the video clips are done playing (MovieClip in stage).
    - Should run automatically when there is no user interaction for X minutes.
    What the problem is:
    - The flash (as a exe and swf i guess) starts to consume memory over time (say 10 hours) until the projector crashes. This usually at around 1.75 GB of memory.
    I cannot see why the Flash cannot garbage collect this and free up the memory. Mabye there is something I don't understand about the garbage collection in flash?
    Here is some code from the video loading and playing:
    var fVideo:VideoPlayer;
    VideoCreate();
    function VideoReady(pEvent:VideoEvent):void
    trace("VideoReady()");
         // start playing video
    fVideo.play();
    function VideoLoad(pUrl:String):void
         trace("VideoLoad(" + pUrl +
         VideoCreate();
         if (pUrl != "")
              if (fVideoFolder + pUrl == fVideo.source)
                   fVideo.seek(0);
    VideoReady(null);
              } else {
    trace(fVideo.state);
                   if (fVideo.state !=
    VideoState.DISCONNECTED) fVideo.stop();
    fVideo.close();                                
    fVideo.load(fVideoFolder + pUrl);
         } else {
    // error no url
    function VideoCreate():void
         trace("VideoCreate()");
         // remove old one
         if (getChildAt(0) == fVideo)
              removeChildAt(0);
         fVideo = new
    VideoPlayer(1024, 768);
         addChildAt(fVideo, 0);
         fVideo.autoRewind = false;
    fVideo.addEventListener(VideoEvent.COMPLETE, VideoDonePlaying);
    fVideo.addEventListener(VideoEvent.READY, VideoReady);

    Hmm. It's in connection with Dropbox. Så apparantly you can only use one of the two at the same time if you want the programs integrated in Finder.

  • Outlook is not connecting through Workgroup Machine over internet using Outlook Anywhere

    users can connect successfully using outlook anywhere over internet if machine are on domain, well problem with workgroup machine that are not connecting over the internet as outlook keep prompting password well i have configured outlook Anywhere with
    default negotiate authentication as well as ssl offloading is checked and using same name for internal and external urls. also have valid 3rd party certificate configured on server.
    Talha Faraz Malik

    Hi,
    Step 1 :In addition to that , please use remote connectivity analyzer to check outlook anywhere in internet .
    From that we came to know the exact error .
    Step 2: Most of the organisations are having an ISA or TMG firewall to create web published rules for exchange services .In case if you have you need to check the rule created for outlook anywhere is properly configured or not.
    If you have such kind of firewall's ,You can test the OA rule by using the option test rule in ISA or TMG firewall .
    Most probably you can able to find out the exact cause with the help of EXRCA.
    Please reply me if you have any queries.
    Regards
    S.Nithyanandham

Maybe you are looking for