Fact/Dim Tables entries analyzing using RSRV

Hi All,
When we analyzing the infocube in RSRV to see percentage of Dimension tables, system is showing 0% for all the dimensions and also for Fact tables.
But data is existing in fact table of infocube and also in dimensions tables, when we see in SE11.we also executed report SAP_INFOCUBE_DESIGNS in SE38, in their also we are not able to find any entry for particular infocube.Please advice on this ASAP.
Thanks & Regards
Manoj

1) transaction se16 -> fact table name, /bic/f[infocube name] and /bic/e[infocube name] or /bi0/f.. and /bi0/e for business content infocube, click 'number of entries'
2) transaction db02 -> 'detail analysis' -> object name = [infocube name]
Hope it Helps
Chetan
@CP..

Similar Messages

Bridge table between fact/dim table

My requirement is to create a relationship between fact (service request) and dim (timesheet) table.
Many rows of dim table is related to a record in Service request. Hence i created a bridge table to join them.
I imported the bridge table into physical layer. Then created two foreign key between the bridge table, dim/fact tables.
Then pulled the bridge table into the dimension logical table source. Then created a new logical join between the fact and dimension table.
When i want to count the nbr of service request, my query is not hitting the service request fact.
Is there any step missed to create the relationship between the fact and dimension for introduction bridge table.
Pls any one provide the step by step for this process. This is little urgent.
Thanks

Just continue on Marks blog...he put it all together nicely:
http://www.rittmanmead.com/2007/06/19/obiee-data-modeling-tips-1-integrating-1-1-and-1-many-source-tables/
and
http://www.rittmanmead.com/2007/09/16/obiee-dimension-data-modeling-redux/
Cheers,
C.

Table entries for Personnel administration and organisation management

Hi ,
For a functional consultant do we need to remember the table entries where the employee infotypes saved or where the table entries is useful as far as Personnel administration and organisation management is concerned.....
and one more thing how to create a custom Infotype (employee) detail documentation required ...
keep me posted
Thanks

hi,
it is really helpful if you rember the table name which holds the information about the infotypes
table starting with PA contains all the personnel information data
like PA0001 holds the information of infoty0001
similary you can check for other info types
and hr haster table like HRP1000 or HRP1001 hold all the other hr objects including your personnel objects as well as organizational related objects
infotype numbers
Four digit number nnnn
Unique identification
9000 to 9999 reserved for customer infotypes
naming convention
0000 to 0999 HR Master data / Applicant data
1000 to 1999 Organizational Management
2000 to 2999 Time data
4000 to 4999 Applicant data
9000 to 9999 Customer defined
defination of infotypes
Each infotype nnnn requires at least two structures and one table:
Structure PSnnnn
 Structure PSnnnn contains all of the infotype data fields.
Structure Pnnnn
 Structure Pnnnn contains infotype key fields and all of the data fields
from structure PSnnnn .
Transparent table PAnnnn and/or transparent table PBnnnn
infotype module pool
A module pool should be used with each infotype. This module pool is the main program for the maintenance interface for the info type.
The name of the program is MPnnnn00. Where P stands for Human Resources (personnel) and nnnn is the four-digit info type number.
Transparent table PAnnnn is required if you want to use an infotype within Personnel Administration.
 If you want to use an infotype within Recruitment, transparent table PBnnnn is required.
In accordance with the distribution of infotype name ranges, objects P9nnn , PS9nnn , PA9nnn and PB9nnn are assigned to the customer name range.
infotype screen
An initial screen
A single screen
A list screen
Initial screen is used as technical interface
Screen 1000 is used for all info types
Processed in background and not displayed
Performs general initialization procedures
A single screen
Its an interface between the system and the user.
It enables to create, display or maintain data records.
Screen 2000 is used for single screen.
list screen
Unable to list all records in info type
Screen 3000 is used for list screen
infotype time constrains
A time constraint indicates whether more than one infotype record may be available at one time. The following time constraint indicators are permissible:
A Only one record may exist, valid from 01/01/1800 to 12/31/9999. Splitting and deletion is not permissible.
B Only one record may exist, valid from 01/01/1800 to 12/31/9999. Splitting is not permissible, but may be deleted.
T The time constraint varies depending on the subtype.
Z Refers to time management infotypes.

to create infotype
Transaction code
PM01.
enhancing PA infotype
Start the Personnel Administration info type copier (PM01)
Enter the info type number.
Choose Enhance info type.
Start transaction PM01
You access the Create Info type screen:
Choose Enhance Info types.
In the Info type no. field, enter the four-digit number of the info type you want to create. When you specify the info type number, please remember to enter any leading zeros.
In the Sub-Objects group box, flag CI Include.
Choose Create. The Dictionary: Initial Screen is displayed.
Create the Cl include.
Choose Activate.
Return to the Create Info type screen.
Choose Create All.
hope this information will help you..
and don't forget to reward points

To check fact and dim table sizes in RSRV

Hi guys,
i hve access to only RSRV on prod so how do i check the fact and dim table ratios what is the test that i have to use to find....
Thanks,
Your help will be greatly appreciated

Hi,
I guess you can try the following options available in RSRV ->All Elementary texts -> Database ->
Database Statistics for an InfoCube and Its Aggregates
Database Information about InfoProvider Tables
Databank Parameters of *-Schema Tables for InfoCube
Check this help link:
[http://help.sap.com/saphelp_nw04/helpdata/en/92/1d733b73a8f706e10000000a11402f/frameset.htm]
hope this helps U...
Regards,
NR

How to display a description in fact table from an unrelated DIM table in powerpivot?

Hello,
I have two tables in powerpivot 2010: 1 that is my fact and the is unrelated. I'm relatively new to SQL and powerpivot.
What I need to do is display a description from my DIM table based on a column in my fact. Is this possible? In my fact, I
have a ReasonID, the DIM has the ReasonID and description. I just need the description added in my fact as a new /
another column. Thanks. John

Hello,
When you have the same column in both tables, then they are related, even if in database no primary / foreign key is defined. In PowerPivot we can define additional / manual relation, just Change to "Diagram View" and define the relation like below:
But if you still want the "Dim description" as a computed column in your fact table, then you can use the
LOOKUPVALUE function
=LOOKUPVALUE(Dim01[Description], Dim01[ReasonId], Fact01[ReasonId])
Olaf Helper
[ Blog] [ Xing] [ MVP]

Fact table have tow column reference the same dim table

In my analytic domain, my fact table have tow column reference the same dim table, but in physical diagram, between two table ,can only have one join, so i create a copy of the dim table, then finish the join in physical. This method can resolve this question, but not so good, Anyone have perfect solution?

user4497169 wrote:
Thanks,
yours method is very very good, I don't know this method before. Where do you get this imfomation?The sample sales RPD has (good) modelling references you can refer to, otherwise think about how you'd write the SQL Statement yourself, you'd need to use an alias to access the same table on seperate joins.

I am using GUI_DOWNLOAD FM to download my internal table entries into .xls

Hi
I am using GUI_DOWNLOAD FM to download my internal table entries into .xls file. but it's not download total records in final table.
in debugging it showing total records.
exporting:
filename
filetype
field-suprater
header
tables
data_tab
fieldnames
plz help me.
thanks
Sankar

Hi
Use as below:
CALL FUNCTION 'MS_EXCEL_OLE_STANDARD_DAT'
EXPORTING
file_name = p_file " path offile where u need to download
CREATE_PIVOT = 0
DATA_SHEET_NAME = ' '
PIVOT_SHEET_NAME = ' '
PASSWORD = ' '
PASSWORD_OPTION = 0
TABLES
PIVOT_FIELD_TAB =
data_tab = int_data "internal table with data
fieldnames = int_head "internal table with header
EXCEPTIONS
file_not_exist = 1
filename_expected = 2
communication_error = 3
ole_object_method_error = 4
ole_object_property_error = 5
invalid_filename = 6
invalid_pivot_fields = 7
download_problem = 8
OTHERS = 9
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Sreeram

Problem in reading the table entries using RFC_GET_TABLE_ENTRIES:

Hi All ,
We are tryiong to read the infocube /BIC/ACDPBARCO00 ( Table ) from BW using the above FM . We are successful in reading the data but , last but one field is appearing as ####### . Actually that particular filed has some data in BW side .
Could you suggest m,e what the problem is and how to correct that data ?
Thanks ,
Dharma .

Hi ,
Are you pulling entries by passing only Table Name or with field names.
If it is based on field names, Please check all field names are correctly passed to this function module or not.
If this FM doesn't work then try with RFC_READ_TABLE, which does the same task.
Regards,
Ravi Sankar,.Z

Transport table entries sap to sap using rfc

Hi Guru's,
           I want to write a program for update one table entries of sap system to onother table of sap system using RFC establishment.
If you have any example code kindly give it to me.
Thanks & Regards,
Lakshman.annamaneni

Hi,
POST - 1
Fisrt create RFC Destination in SM59 between sender & receiver system.
*Sender System:*
FUNCTION XX_RFC_READ_SPFLI.
*"*"Local Interface:
*" IMPORTING
*"     VALUE(CARRID) LIKE SPFLI-CARRID
*"     VALUE(CONNID) LIKE SPFLI-CONNID
*" EXPORTING
*"     VALUE(EX_SPFLI) LIKE SPFLI STRUCTURE SPFLI
*"     VALUE(SYS) LIKE SY-SYSID
*" EXCEPTIONS
*"      INVALID_DATA
SELECT SINGLE * FROM spfli INTO spfli_workarea
         WHERE carrid      = carrid
         AND    connid      = connid.
IF sy-subrc EQ 0.
    ex_spfli = spfli_workarea.
ELSE.
    RAISE invalid_data.
ENDIF.
Sys   = sy-sysid.
ENDFUNCTION.
*NEXT: create a Prog.*
REPORT XX_RFC_Tutorial.
Global Data Declaration
TABLES: spfli.
PARAMETERS: p_carrid LIKE spfli-carrid DEFAULT 'LH',
            p_connid LIKE spfli-connid DEFAULT '400'.
DATA: SYSTEM LIKE SY-SYSID.
* Calling the Function
CALL FUNCTION 'XX_RFC_READ_SPFLI'
   EXPORTING
         carrid       = p_carrid
         connid       = p_connid
   IMPORTING
         ex_spfli     = spfli
         sys          = system
   EXCEPTIONS
         invalid_data = 1.
* Handling Exceptions
CASE sy-subrc.
   WHEN 1.
      WRITE 'No data available'.
       EXIT.
ENDCASE.
* Displaying Results
WRITE: spfli-carrid,
       spfli-connid,
       spfli-cityfrom,
       spfli-cityto,
       spfli-deptime,
       spfli-arrtime.
See the next post for Receiver System:
Anil.

Duplicate Entries in Flashback Table when queried using as of timestamp

Hi All,
Oracle Version : Oracle Server - Enterprise Edition 11.1.0.7
OS: HP-UX PA-RISC (64-bit)
We have a table name DIRECTORY_LISTING_GROUP with HEADER_KEY as primary key.
So when i query like this
SELECT * FROM DIRECTORY_LISTING_GROUP AS OF TIMESTAMP TO_TIMESTAMP('05-NOV-12 10:00:00','DD-MON-YY HH24:MI:SS') WHERE HEADER_KEY=#
Ideally i should get only one row but i m getting two rows which are exactly the same.
Please advice

Peter vd Zwan wrote:
Hi,
Maybe it is a primary key now but are you sure it was a primary key at 05-NOV-12 10:00:00 ?If it was not primary key at 05-NOV-12 10:00:00, and now it is,
which implies primary key constraint was added using ALTER TABLE command.
But using ALTER TABLE command would invalidate the undo data for that table. And using the flashback query would generate exception something like "table definition has changed".

What r the diff. error that can be solved using RSRV tcode?

Hi ,
what r the diff. error that can be solved using RSRV tcode?
I want to know all the errors that can be solved using RSRV t code
if any body is having good document regarding RSRV please send it to me at
[email protected]
Thanx in advance,
ravi.

Hi,
Refer the below links for more details about RSRV TCODE.
/community [original link is broken]
http://help.sap.com/saphelp_nw04/helpdata/en/92/1d733b73a8f706e10000000a11402f/frameset.htm
it's for bw objects consistency analysis and repair.
from transaction code RSRV doc itself :
Transaction RSRV: BW Data and Metadata Test and Repair Environment.
Transaction RSRV checks the consistency of data stored in BW. It mostly examines the foreign key relationships between individual tables in the enhanced star schema of the BW system.
The transaction interface was re-designed for SAP Portals release 3.0A. A brief guide about how to use the transaction follows.
Starting the Transaction
You can reach the test and repair environment
By entering the transaction code RSRV
From InfoObject maintenance (Transaction RSD1)
By clicking on the "Analyze" button in the intial screen.
After selecting a characteristic in the maintenance screen via the "Processing -> Analyze InfoObject" menu option.
The Initial Screen
When using the test and repair environment for the first time, the message "Values were not found for all setting parameters" draws your attention to the fact that there aren't any saved settings for your user.
After confirming the dialog box, you reach the initial screen of the transaction. This is divided into two parts:
1. On the left-hand side, you can see a tree structure with the pool of available tests.
2. The right-hand side is empty at first. The tests you have selected will be put here. A selection of tests is called a Test Package here.
Combined and Elementary Tests
An Elementary Test is a test that cannot be divided into smaller tests and that can therefore only be executed as a whole.
In this regard, a Combined Test determines which elementary tests are to be executed after entering the parameters. You can remove individual elementary tests from the test package before carrying out the actual test run, in order to reduce run time, for example.
Combining a Test Package and Executing it.
Firstly select one or more tests with drag&drop or by double-clicking. Each selected test appears as a closed folder in the view of your test package. (An exception is elementary tests without parameters: These do not appear as a folder). You can also drag a whole folder of tests from the test pool across to the right-hand screen area; all tests that are located in the hierarchical structure under this folder are then added to the test package. You can also display a short description of the test, if required. Do this right-clicking on a test and choosing "Description" from the context menu.
Afterwards, you must supply the tests with parameters. Tests without parameters must not be given parameters. You are given notification of this when selecting them. You can enter parameters by double-clicking on a test (or a test package) or by expanding the folder of the test.
A dialog box appears in which you must enter the required parameters. Input help is often available. After entering the parameters, a folder with the name "Parameter" is added under the test. This contains the parameter values. The test name can change in some circumstances, enabling you to see at first sight for which parameter values the test is to be executed. It is possible to select the same test several times and give it different parameters, which may even be preferable in some situations. When you have supplied the combined test with parameters, the folder with the name "Elementary Tests" is added under this one. It contains the elementary tests, from which the combined test is built. You can delete individual elementary tests in the test pool using drag & drop.
After supplying all tests with parameters, you can start the test run by clicking on the "Execution" button. After execution, the test icons change from a gray rhombus to a red, yellow or green one, depending on whether the test had errors, warnings or was error-free.
Test Results
The test results are written to the application log. Depending on the settings, the system jumps automatically to this display, or you can reach it by clicking on the "Display" button. The results are saved in the database, and can therefore be compared later with additional test runs.
In the left-hand side of the window, you can see an overview of the most recent test runs. Double-clicking on a folder displays all messages under these nodes as a flat (non-hierarchical) list in the right-hand screen area. Long texts or detail data may be available for individual messages, which can be displayed with a mouse click.
Repairs
Some tests can repair inconsistencies and errors. Automatic correction is generally not possible: If entries are missing from the SID table for a characteristic, in which case the lost SIDs are still being used in a dimension table (and the corresponding dimension keys are still being used in the fact table) of an InfoCube, you can only remove the inconsistency by reloading the transaction data of the InfoCube. Also note that you must make repairs in the correct sequence. You must always read the documentation for the test and have a good idea about how the error occured, before making the repairs.
After executing the test run, go from the application log back to the initial screen to make these repairs. Click on the "Fix Errors" button to start an error run. Since the dataset could have changed between the test and the repair run, the required tests are executed again before the actual repair. The results can be found in the application log once again.
Test Packages
The test package is deleted if you do not save the test package in the display before leaving the test environment. Choose "Test Packages -> Save Test Package" in the option menu. You can do the following via options in the "Test Package" menu:
Load packages
Load for processing - the package is then locked against changes by others.
Delete and
Schedule execution at a later date or at regular intervals in background processing
Settings
In the "Settings" menu option, you can make settings (adjust the size of the screen areas, for example) and save them. The settings are automatically read when starting the test environment. Support packages are being delivered with additional settings options since the test environment is under development at the moment. A message notifies the user at the start if there aren't any values for the setting options.
Jobs Menu Option
You can access the job overview via the Jobs -> Job Overview menu. Use this when you want to check the status of a test package you have scheduled.
Application Log Menu Option
You can display old logs from previous test runs in the dialog box, as well as scheduled ones. The option of deleting test logs can also be found here.
New Selection Button
The currently selected test package is deleted when you press this button.
Filter Button
After a test run, click on this button to remove all elementary tests without errors or warnings from the test package.
Executing Test Packages in Process Chains
You can add a process chain to the ABAP Programm RSRV_JOB_RUNNER in the process chain maintenance transaction, RSPC. To do this, use drag & drop to select the process type "ABAP Program" under "General Services" in the process type view. When maintaining process variants you will be asked for the program name and a program variant. Enter RSRV_JOB_RUNNER for the program name. Choose a program variant name and click on "Change". In the next screen you are able to either change or display an already existing variant, or create a new variant. When creating a new variant you will be asked for the following: Package name (an imput help on this is available), the detail level for the log to which the RSRV log in the process chain log is to be integrated, and a message type severity at which process chain processing should be terminated.
The RSRV process log in the process chain is built as follows:
First is a summary specifying whether errors, warnings, or no errors occurred for each elementary test.
A log view of the RSRV test package at the specified detail level follows.
Example: If you choose the value '3' for the detail level, only messages up to and including detail level 3 will be included in the log processes for the process chain. Messages occuring at a lower layer of the test package test are not displayed in this log. Please note that, unlike the application log, the process log does not propagate errors from deep detail levels to low detail levels. For example, if a single detail level 4 error occurs the summary will show that the relevant test delivered an error. However, this error will not be listed in the second part of the log.
A complete log is always written independantly of the RSRV process log in the process chain. You can view this in the menu option "Application Log->Display Log->From Batch".
Please note that there is currently no transport object for test packages and that consequently these cannot be transported. Process chains that execute RSRV test packages must therefore be manually postprocessed after a transport to a different system: The relevant test packages must be created.
Hope This Helps,
This is already there in SDN.
Regards,
rik

How to delete table entries with SE16 in debugging mode?

We are trying to delete some table entries which cause our InfoPackage short dumps in BW system. The problem is that we can only see the Display menu item with SE16 and the Delete menu item is dimmed that we are unable to conduct the deletion. SAP Support suggest to use debug with SE16 to do the deletion, but we can't figure out how!
Anyone's idea is greatly appreciated!

Then you are not at the right place. Lets start at the begining.
Go to SE16.
Enter table name.
Hit F7.
Enter selection criteria.
hit F8.
Double click the specific record that you want to delete.
In the transaction code field at the top, enter "/H" and hit enter. Debug is switch on.
Now hit enter again.
You should now be in debug and you should see this code..
form set_status_val tables ntab structure x031l
 using code name next for_lines.
field-symbols: <field>.
refresh exclude_tab.
if code = 'SHOW'.
 set titlebar 'TAB' with name 'anzeigen'(100).
elseif code = 'EDIT'.
 set titlebar 'TAB' with name 'ändern'(101).
elseif code = 'INSR'.
 set titlebar 'TAB' with name 'einfügen'(102).
elseif code = 'ANVO'.
 set titlebar 'TAB' with name 'einfügen'(102).
elseif code = 'DELE'.
 set titlebar 'TAB' with name 'löschen'(103).
Notice that there is a field called CODE in the IF statement.
Now enter the word "CODE" in the field names list, change the value to DELE and click the pencil. Hit F8. Now you can delete the entry.
Regards,
Rich Heilman

Dim Table size

HI ALL
How can one measure the size of the dim table in relation to the fact table
Thanks
Varma

Rajesh,
note down the technical name of the Dimention table, go to SE11, provide the tables name, press F7, press CTRLSHIFTF11(contents)--> on the selection screen you could see No. of entries push button on the application tool bar.
All the best.
Regards,
Nagesh Ganisetti.
Put yourself on the SDN world map (http://sdn.idizaai.be/sdn_world/sdn_world.html) and earn 25 points.
Spread the wor(l)d!

Table entries not getting displayed in desired format

Hi All,
In my adobe layout I created a table . I used data format Align Right and align middle for the table entries. In the Output some entries of the table are not displaying in align right and align middle.
Output:In the below output the first row data is not in desired format .
Thanks in Advance,
Suneel.Uggina.

That is pretty to much information to help you.
You need to share your technical setting. How did you create the table? Subforms, Table-assistent... what are the values in? Format, what happens when you also pass more than 1 digit to the numbers in the first row, does it show up correct?
So please share more details and explain exact what you have tried to fix the issue. The community is able to help you, but not meant to suggest enaything you could have done.
~Florian

Right way to preserve all parent table entries in a join with many tables!!

This problem is quite interesting to me. I have asked this question to others but no body is able to provide me with proper answers.
The problem is: How do I join a huge parent table with many child tables (more than 5 child tables) preserving all of the parent table entries. Lets say there is the parent table parentTable and three child tables childTable1, childTable2, childTable3. In order to get the data after joining these tables the query that I have been using was:
select parent.field1, parent.field2, parent.field3, child1.field4, child1.field5, child2.field6, child3.field7 from ParentTable parent, childTable1 child1, childTable1 child2, childTable3 child3 where parent.fielda = child1.fieldb and parent.fieldc = child.fieldd and parent.fielde = child.fieldf.
Although the tables are huge (more than 100,000 entries), this query is very fast, however those parent table entries which do not have child entries are lost. I know that I can left join a parent table with a child table and then with the next child table and then with the next child table and continue. Isn't there a simple solution for this commonly happening problem?
Please provide suggestions please...

Hello Lakshmi,
Although I do not know exactly how to achieve what you want to achieve but I have seen DBAs/ABAPers in my experience can run queries/scripts using the COUNT function to give the actual number of line items per table for all your 100 or odd tables.
Rgds
CONMJI

Fact/Dim Tables entries analyzing using RSRV

Similar Messages

Maybe you are looking for