Fade in/out bug..!!!

hello everyone ..recently i just discovered the most annoying bug in logic..so the problem goes like this:
on my vocal track i create like fade in/fade out on it..when i played it before i close my project those fades still play fine..but when i close it and load my project next time, that vocal track that has fade in like played other tracks sound but only on the fade in section when and it happens on my whole project that has fade in/out on it, so every time theres a fade on it the track like playing other noise...has anyone ever stumbled to this kind of problem..could anyone tell me what should i do in order to avoid this kind of annoying bug..??
thank you for your time.

Hey, thanks Sampleconstruct.
I was getting this bug from time to time too. What I did was shorten the region (first removing the fade) then putting the region back to the original length then re-applying the fade. It worked, but got tedious when it decided to do it on 12 or 16 tracks.
Your solution worked perfectly and takes a lot less time and frustration when this occasionally raises it head. i wonder what causes the fades to corrupt.

Similar Messages

Text fade in/out won't work if a light makes shadows

I found that text won't actually use a fade in/out behavior if you are using a light that projects shadows.
Now, that's an interesting thing. I used to notice with drop-shadows in Mo3, the shadow would show up and the fade would be sort of weird since you could see the shadow under while it faded in. It wasn't a very pretty fade since it got dark and muddy first.
So, now, it just won't let you do it.
Bug or user error?

Adjusting the opacity of a text layer forces it's rasterization. This essentially gives it the properties of a 2D layer which aren't affected by lights.
In order for you to get a cast shadow AND a fade in/out, you must first flatten the text layer. This can be done by selecting the Flatten button in the Text tab of the inspector. Or else you can drop the text into a 3D group and flatten the group from the Group tab.
Andy

I need help with XML Gallery Fade in out transition. somebody please help me :(

I need help with XML Gallery Fade in out transition. somebody please help me
I have my post dont want to duplicate it

The problem doesn't lie with your feed, although it does contain an error - you have given a non-existent sub-category. You need to stick to the categories and sub-categories listed here:
http://www.apple.com/itunes/podcasts/specs.html#categories
Subscribing to your feed from the iTunes Store page work as such, but the episodes throw up an error message. The problem lies with your episode media files: you are trying to stream them. Pasting the URL into a browser produces a download (where it should play the file) of a small file which does not play and in fact is a text file containing (in the case of ep.2) this:
[Reference]
Ref1=http://stream.riverratdoc.com/RiverratDoc/episode2.mp3?MSWMExt=.asf
Ref2=http://70.33.177.247:80/RiverratDoc/episode2.mp3?MSWMExt=.asf
You must provide a direct link to the actual mp3 file. Streaming won't work. The test is that if you paste the URL of the media file (as given in the feed) into the address bar of a browser it should play the file.

Help with transitions and fade in / out

I need help. I need some kind and infinitely patient personto explain, step by step, in simple words of less that one syllable how I can fade in my movie and how I can apply transitions between the clips.
I’ve tried, oh have I tried. I’ve read the manual, I’ve watched three video’s on youtube (they were bad!), found a lot of quality online help but I still don’t get it.
What I do get is random results. Like my movie fades in once then it won’t do it again. Like I get the grey transition box but can’t extend the transition beyond0.1 of a second. Like I trim my movie and the transition removes the trim. And so on.
So if some kind soul could help, or even point me in the direction of transitions made simple I’d appreciate it.
Many thanks.

Transitions and FCE are all about Media Handles.
Search this forum for mor info, you will find plenty.
Here's a start:
https://discussions.apple.com/message/1356445?messageID=1356445&amp%3b#1356445
This may help for Fade in/out settings:
https://discussions.apple.com/message/9037985#9037985
Al

Dynamically add a fade in/out transition to a caption when "showing" it from an Action?

I have a conditional action set up where if things are not correct (text input in two entry fields), I show feedback in a caption box. I figured out how to set the caption box to be initially invisible (via unchecking the Visible checkbox for the caption's properties), and how to show it when this condition occurs. But I 'd like it to also do the traditionall transition of fade in & out when I show it fromt he action. My Advanced Action is executed when the user clicks an "OK" button.
Any thoughts or advice?

Yes. Plenty of media on either end. The good news is that trashing the permissions and repairing worked.
BUT I have a question while these great minds are assembled...When repairing disk permissions the Utility says that to repair permissions on startup disk, start using my OSX install disk, which in my case is the the CD that came with my powerbook. When I tried to startup using that CD, holding down the "c" key on startup, it went into install mode. I told it I did not want to install, set the startup disk as the CD again, and kept looping around in this manner. I am probably missing a step...First question:
1) Is it in fact necessary to start up from this CD in order to properly repair permissions?
2) If yes, how do I get away from the install mode and to the disk utility, once the installer pops up.
Thanks in advance. You guys are lifesavers once again.

Individual track start and end times: Fade in & out?

I can set start & end times for individual tracks.
Can I also fade in & out?

You can set start and stop times for individual tracks using Get Info>>Options tab.
iTunes Preferences>>Playback tab has a crossfade option that you could check out to see if it does what you want on fading in and out.

Fade in/out several tracks with the crossfade tool?

Can I Fade in/out several tracks with the crossfade tool? I mean without selecting them and then add value...? just like in ProTools just selecting the regions and apply the fade tool???? VIP question

The Sound Factory Studio wrote:
Can I Fade in/out several tracks with the crossfade tool? I mean without selecting them and then add value...? just like in ProTools just selecting the regions and apply the fade tool???? VIP question
No.
To add crossfades or fade in/outs to multiple audio regions, you must do it from the fade parameter box, either entering numerically, or by clicking and dragging on the numeric value.

Adobe Audition CC 2014 - Fade In/Out to playhead?

Hello all,
My question is this: In a multitrack session (or in waveform editor) I want to be able to tell Audition to fade in/out to the playhead. At present, I can set a shortcut to "Clip--Fade In(Out) Normal". However, when I use said shortcut in a multitrack session Audition makes a fade in/out of a predetermined length (appx 16 sec). If anyone knows how to adjust this please let me know, otherwise let this thread stand as a feature request.
Thanks.

I think you misunderstand the question. I know how to draw a volume envelope. Here's what I want to do:
Right now to use the automatic fades that are present on each clip I have to grab the box and draw it out. Now, as I said before, there are keyboard shortcuts that will activate this without having to draw it out. I have done this by going to the keyboard shortcut editor, finding "Clip--Fade In (or Out) Normal" and assigning Alt-G to it. If I use my assigned shortcut now it makes a fade that seems to be set at random, probably in relation to the overall length of the selected clip (longer clip=longer fade). What I would like it to do is exampled by the pic above, simply give me a fade in/out in relation to where the playhead is on the selected clip. This would be similar if one was in ProTools (with a-z mode) and types "D" (Fade from start) or "G" (Fade to end). If this option isn't available it should be on a future release.

Ipad 2 with version 8.1.3; update to take out bugs etc and now every time I click on an app it asked for my itunes id before I can get it to open; any help would be appreciated

I did the update to take out bugs etc; now when I try to open an app, it asks for my Itunes ID before it will open; this is a pain; has anyone else had this problem or knows how to correct this, assistance gratefully appreciated, thanks

Please tell me that it has NEVER been jailbroke. If it has never been jailbroke, here are some standard repair procedures:
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, read this.

How to make movieclip controlled by button fade in/out on mouse over/out?

Hi,
I am new to Flash, and have tried searching numerous forums to the answer to this question, but nothing I try seems to work. Basically I am trying to create a single "Image" that triggers different animations when you mouse over different invisible buttons located on specific areas. The technique I am using is basically spacing out the animations over different frames, and using the gotoAndPlay command specifying the where the relevant animation is located.
Here is the code from my actions layer with two animations:
stop(); /*This ensures no animations are playing on the first frame*/
/*Mouse over event for redbutton1*/
redbutton1.addEventListener(MouseEvent.MOUSE_OVER, fl_MouseOverToGoToAndPlayFromFrame_2);
function fl_MouseOverToGoToAndPlayFromFrame_2(event:MouseEvent):void
     gotoAndPlay(2); /*This is the frame where the animaton triggered by redbutton1 is located*/
/* Mouse Out Event for redbutton1*/
redbutton1.addEventListener(MouseEvent.MOUSE_OUT, fl_MouseOutHandler_3);
function fl_MouseOutHandler_3(event:MouseEvent):void
     gotoAndPlay(1) /*takes animation back to the start of timeline where it stops*/
/*Mouse over event for bluebutton1*/
bluebutton1.addEventListener(MouseEvent.MOUSE_OVER, fl_MouseOverToGoToAndPlayFromFrame_2);
function fl_MouseOverToGoToAndPlayFromFrame_2(event:MouseEvent):void
     gotoAndPlay(30); /*This is the frame where the animaton triggered by bluebutton1 is located*/
/* Mouse Out Event for bluebutton1*/
bluebutton1.addEventListener(MouseEvent.MOUSE_OUT, fl_MouseOutHandler_3);
function fl_MouseOutHandler_3(event:MouseEvent):void
     gotoAndPlay(1) /*takes animation back to the start of timeline where it stops*/
Now basically all I need is some code that means that instead of abruptly starting and stopping the animation, the animation will fade in/out whenever the mouseover/out events are triggered. Note: the animation doesn't have to finish, it basically only plays while the mouse is over.
Any help would be greatly appreciated.

It will help oif you show the code for the code-based tweening. The basics of getting it working with the MOUSE_OVER/OUR commands is fairly straightforward.
You have listeners for both events, and the handlers for each listener is where you activate the tweens. For more seamless functionality it is usually a good idea to have the starting point of the tween be the point where the object currently is (its x or y (or both) propertiy) instead of a fixed value.

Fade in / out

Using code snippets i have made a script which fades in on mouse over and fades out on mouse out
Once it reaches full fade in/out an if statement condition is met and the enter_frame event listener event which causes it to continue fadeing in/out is removed.
If the mouse out is detected while it is still fading in it fully fades out and then fades back in until it reaches max fade in because when the fade out started the condition for the IF statement which removed the fade in effect had not been met.
I have two questions
1) how do i fix this (i have tried copy/pasting the removeenterframe event code for the fade in into several parts of the fade out script but all this does is stop it from working, also when i do this a second object with no script attatched to it starts flashing on and off)
2) The fade in and fade out effect both operate at the same rate so if both are running one would expect the object to remain static. the way it behaves however suggests that the fade in effect is actually put on pause until the fade out effect is canceled by its own IF statement. why is this?
anyway code is bellow
/* Fade In Movie Clip
Fades in the symbol instance by increasing its alpha property within an ENTER_FRAME event until it is fully visible.
Instructions:
1. To change the speed at which the symbol instance fades in, change the 0.01 value below (valid values are in the range 0.0 - 1.0). Higher values cause faster fade in.
2. The '+=' operator is a shortcut to typing 'movieClip_1.alpha = movieClip_1.alpha + 0.1'.
3. Because the animation uses an ENTER_FRAME event, it progresses only when the playhead moves to a new frame, and the speed of the animation is also affected by the frame rate of the FLA file.
/* Mouse Over Event
Mousing over the symbol instance executes a function in which you can add your own custom code.
Instructions:
1. Add your custom code on a new line after the line that says "// Start your custom code" below.
The code will execute when the symbol instance is moused over.
movieClip_1.addEventListener(MouseEvent.MOUSE_OVER, fl_MouseOverHandler);
function fl_MouseOverHandler(event:MouseEvent):void
movieClip_1.addEventListener(Event.ENTER_FRAME, fl_FadeSymbolIn_4);
function fl_FadeSymbolIn_4(event:Event)
movieClip_1.alpha += 0.01;
if(movieClip_1.alpha >= 1)
movieClip_1.removeEventListener(Event.ENTER_FRAME, fl_FadeSymbolIn_4);
/* Mouse Out Event
Mousing out of the symbol instance executes a function in which you can add your own custom code.
Instructions:
1. Add your custom code on a new line after the line that says "// Start your custom code" below.
The code will execute when the symbol instance is moused out of.
movieClip_1.addEventListener(MouseEvent.MOUSE_OUT, fl_MouseOutHandler);
function fl_MouseOutHandler(event:MouseEvent):void
movieClip_1.addEventListener(Event.ENTER_FRAME, fl_FadeSymbolOut);
function fl_FadeSymbolOut(event:Event)
movieClip_1.alpha -= 0.01;
if(movieClip_1.alpha = 0)
movieClip_1.removeEventListener(Event.ENTER_FRAME, fl_FadeSymbolOut);
/* Fade Out Movie Clip
Fades out the symbol instance by decreasing its alpha property within an ENTER_FRAME event until it is invisible.
Instructions:
1. To change the speed at which the symbol instance fades out, change the 0.01 value below (valid values are in the range 0.0 - 1.0). Higher values cause faster fade out.
2. The '-=' operator is a shortcut to typing 'movieClip_1.alpha = movieClip_1.alpha - 0.1'.
3. Because the animation uses an ENTER_FRAME event, it progresses only when the playhead moves to a new frame, and the speed of the animation is also affected by the frame rate of the FLA file.

Even with Quicktime Pro? If not, is there a plug-in or add-on, or perhaps another program that will allow me to do this?

Fade in/out with external SWFs

Hi All.. I"m very new to AS in general..
I'm trying to have a simple slideshow with external SWFs that outomatic and onClick..I achieved it except the abrupt white space after the unloaded clip goes away... I have this code and I'm not getting any errors - but I mut not have it connected somehow because the fade out is still not there... Can someone please please help me with this... I really appreciate any help ahead of thime...
//Import classes for easier use
import fl.transitions.Tween;
import fl.transitions.TweenEvent;
import fl.transitions.easing.*;
//Timer
var slideDuration:uint = 8000; // or use whatever
var slideTimer:Timer=new Timer(slideDuration,0);
slideTimer.addEventListener(TimerEvent.TIMER,autoAdvanceF);
slideTimer.start();
var btnA:Array = [one_btn,two_btn,three_btn];
var previousBtn:SimpleButton = one_btn // use class type of your buttons
function autoAdvanceF(e:TimerEvent):void{
nextButtonF(previousBtn).dispatchEvent(new MouseEvent(MouseEvent.CLICK));
function nextButtonF(btn:SimpleButton):SimpleButton{ // use class type of your buttons
for(var i:uint=0;i<btnA.length;i++){
if(btnA[i]==btn){
return btnA[(i+1)%btnA.length];
return null;
//Load external SWF into main
var Xpos:Number = 0;
var Ypos:Number = 0;
var swf:MovieClip;
var loader:Loader = new Loader();
var defaultSWF:URLRequest = new URLRequest("swfs/one_btn.swf");
var target_mc:MovieClip = new MovieClip();
addChild(target_mc);
var target_mc2:MovieClip = new MovieClip();
addChild(target_mc2);
//load swf to movieClip
target_mc.addChild(loader);
//variables that store current content clip and current content indes
var activeTarget:MovieClip = new MovieClip();
loader.load(defaultSWF);
loader.x = Xpos;
loader.y = Ypos;
addChildAt(loader,0);
//Btns universal function (whenver any button is clicked, the loader will be removed
function btnClick(event:MouseEvent):void {
    if (target_mc.alpha > 0) {
        target_mc.alpha -=10;
    if(target_mc2.alpha < 100) {
        target_mc2.alpha +=10;
slideTimer.reset();
slideTimer.start();
    previousBtn = SimpleButton(event.currentTarget);
    removeChild(loader);
    var newSWFRequest:URLRequest = new URLRequest("swfs/" + event.target.name + ".swf");
    var myTween:Tween = new Tween(loader, "alpha", None.easeIn, 0, 2, 1, true);
    loader.load(newSWFRequest);
    loader.x = Xpos;
    loader.y = Ypos;
    addChildAt(loader,0);
loader.addEventListener(Event.ENTER_FRAME, onEnter);
// Movie level enterFrame event handler that will fade down object 1 (if it's alpha ishigher than 0) and fade up object 2 (if its aslpha is less than 100)
function onEnter(event:Event):void {
    if (target_mc.alpha > 0) {
        target_mc.alpha -= 10;
    if (target_mc2.alpha < 1 ) {
        target_mc2.alpha +=10;
    loader.removeEventListener(Event.ENTER_FRAME, onEnter);
    trace ("the movie clip is faded in");
/// Button Listerners
one_btn.addEventListener(MouseEvent.CLICK,btnClick);
two_btn.addEventListener(MouseEvent.CLICK,btnClick);
three_btn.addEventListener(MouseEvent.CLICK,btnClick);

The Sound Factory Studio wrote:
Can I Fade in/out several tracks with the crossfade tool? I mean without selecting them and then add value...? just like in ProTools just selecting the regions and apply the fade tool???? VIP question
No.
To add crossfades or fade in/outs to multiple audio regions, you must do it from the fade parameter box, either entering numerically, or by clicking and dragging on the numeric value.

My screen is blacked out, it will pop back in for a few then fade back out

my screen is blacked out, it will pop back in for a few then fade back out; does this happen to anyone else?

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
No data is lost due to a reset.

Make images fade in & out?

Hi, we're redeveloping our application in swing (java 1.4.2).
When the application is not in use it displays several images on the screen. We want these to smoothly fade in and out (not necessarily synchronised with each other) so as to be more visually appealing.
Any recommendations on a good technique?
We don't want to use animated gifs due to the 256-colour limit - is there a way to do this that isn't CPU-intensive? Something we can use with PNGs, for example?
TIA
Phil

well perhaps you can override the paint method, which will change the opacity of the image...and maybe use some type of thread or timer to animate that fade in/out affect. Set change the opacity used by the Graphics2D object in a paint method do the following:
     * Set alpha composite. For example, pass in 1.0f to have 100% opacity
     * pass in 0.25f to have 25% opacity.
    private AlphaComposite makeComposite(float alpha) {
        int type = AlphaComposite.SRC_OVER;
        return (AlphaComposite.getInstance(type, alpha));
     public void paint(Graphics g) {
              Graphics2D g2d = (Graphics2D) g;
              g2d.setComposite(makeComposite(.25f));
              // do some painting...
      }that should give you some idea.
good luck!

Can I alter the fade in/out times of titles?

Many of the canned titles have a fade in/out which for me is too abrupt.
I would like to make them much longer but can't find any way in the Inspector.

Thanks for the responses.
I omitted to mention that I also want to do the same thing with normal clips.
Up to now I have used the workaround of adding a cross dissolve to the front or end of the clip and stretching it to a suitable length but this does not work with a title.
I was hoping that titles and clips would have an opacity line on them which could be keyframed and adjusted as in FCP.
I eventually returned to FCP 7 and achieved it in seconds.

Fade in/out bug..!!!

Similar Messages

Maybe you are looking for