Ipad 2 with version 8.1.3; update to take out bugs etc and now every time I click on an app it asked for my itunes id before I can get it to open; any help would be appreciated
I did the update to take out bugs etc; now when I try to open an app, it asks for my Itunes ID before it will open; this is a pain; has anyone else had this problem or knows how to correct this, assistance gratefully appreciated, thanks
Please tell me that it has NEVER been jailbroke. If it has never been jailbroke, here are some standard repair procedures:
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, read this.
Similar Messages
-
I'm used to clicking a link on a news story or any searched link on google and having my current page go there. Now my current page stays the same and any link I click opens in a new tab. This is very annoying. I just want my browser to go there.
Google Toolbar Options, in the Search tab, make sure that '''Enable the Google new tab page''' is check-marked. If that doesn't fix it for you, see this for support information about the Google Toolbar. <br />
[http://www.google.com/support/toolbar/?hl=en] <br />
Or visit the Google Toolbar forum. <br />
[http://www.google.com/support/forum/p/Toolbar?hl=en]
As far as your UserAgent showing Firefox 3.0.11, see this: <br />
https://support.mozilla.com/en-US/kb/Websites+or+add-ons+incorrectly+report+incompatible+browser
You might want to consider getting rid of that '''desktopsmiley''' program that has messed up your UserAgent, it is known as Malware. -
I am a BT Yahoo customer using Apple Mail, on iMac, iPad iPhone, 4 to 8 times a week sent mail is not delivered into the sent mail box and I have no record of the sent e-mail or its content. BT say it’s an apple problem. Any help would be appreciated. Ted
Hello,
Are they just regular size eMails?
Do you have more than one eMail account setup?
Next time it happens, get...
Find Any File...
http://apps.tempel.org/FindAnyFile/
Hold Option or alt key when selecting Find to Find All.
Use it to Find All, for Name ends in...
.emlx
(dot ee em el ex)
And Modification Date, is within, the last 5 minutes or whatever. -
Hi, I have an Adobe CC single App subscription at €25. per month, why do I now have to pay another 12.99 to get Lightroom CC? any help would be appreciated, thanks.
Hi there
You currently have a single app membership for Photoshop. You might want to consider changing to the Creative Cloud Photography plan if you wish to have Photoshop CC + Lightroom CC - see Creative Cloud pricing and membership plans | Adobe Creative Cloud
Photoshop Help | Differences between Photoshop and Creative Cloud Photography Programs
Thanks
Bev -
I juat purchased a Mac Pro Laptop. After downloading iTunes, I could only find four purchased albums. Any help would be appreciated -
Hi Bill,
Never bought anything on iTunes, but I think you just need to fill out this form...
http://www.apple.com/emea/support/itunes/contact.html -
I have purchased apps in the past and now every time I download a new app my IPad notifies me that they cannot be purchased at the time. For example, tap tap revenge and 11 others cannot be purchased at the time. How can I get rid of it. Can anybody help?
The application iExplorer may be useful in your situation. Read these links below
I found this in another long discussion (on the ASC site) about this very same problem that you are having.
http://www.blog.gleff.com/2012/03/app-store-unable-to-purchase-fix/
This is the discussion.
https://discussions.apple.com/thread/3681763?start=45&tstart=0 -
Having just installed the latest iTunes update, I find my system grinds to a complete standstill. I've checked and found two apple processes, apsdaemon.exe and applemobiledeviceservice.exe use 90% plus of my processor, so have stopped these. However, each time I start iTunes the same situation occurs. Is there anyway I can remove these exes from my system or is apple aware of this stupid update and what are they doing about it. Any guidance would be very much appreciated
What version of itunes were you using before you updates?
Have you checked other related post?
iTtune will require applemobiledeviceservices.exe and others to run. What you are experencing is usually caused by a conflict with other software on you system. Everybodys system is set up differently, so there is not a "one fix all". Most commonly associated with Firefox addons, video accelerator software, podcasts on the backup, anivirus software, parential control software, take you pick!
I found my fix here.
https://support.apple.com/kb/TS4123 -
Hi Team,
Unfortunatly, I plugged-in one of my friends external hard drive, and its asked me for the seagate driver instalation, after that every time when I am turning on my system, its asking for the goFlex software instalation process.
I tried out some process by googleing, I tried to remove the complete segate from my system, still it didn't help me.
Please help me with, to remove a complete segate package.
Thanks,
Jayaram.Thanks Richard.
The 3 point did help me, now its not all asking for the each time instalation for the same driver.
Here one question comes to my mind, by deleting the content of the temp folder for the segate and removing all the releated files from the application, library->application support, library->extension, library->LaunchAgents, I deleted all the releated files of segate, could you please let me know if I need to delete from any more location to avoid the garbage files.
Thanks for your time and help -
I've tried turning it off and resetting cleared out space but nothing works
Maybe:
iOS 7 Messages (Saved) Can't Delete: Apple Support Communities -
I've rebooted 6x already today and i'm dying without my internet. I even had to download the google chrome because I'm at work and NEED to listen to grooveshark!!
It shouldn't be necessary to reboot the computer to complete an update.<br />
If a reboot is needed then that usually means that some (security) software is blocking files or you need elevated (UAC) permissions.<br />
Run the Firefox program once as Administrator (right-click: Run as Administrator).<br />
If that doesn't help then do a clean reinstall.
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox. -
I believe my ipads hard drive corrupted when i went from my macbook to a pc...I can get to the screen with cord and itunes but cant get past there to desktop of ipad...Any help would be appreciated....
Try using this article to help with your iPad not showing up in iTunes---
http://support.apple.com/kb/TS1538 -This deals with the device not being recognized in iTunes for Windows
The following steps work well with iPod but i would try them for help with your iPad issue:
Try connecting your iPad to another USB port directly on the computer. Verify that you're connecting it to a high-powered USB 2.0 port on your computer to be sure iPad is getting power. If you're connecting to a Windows laptop computer through USB, connect the laptop to a power outlet before connecting your iPad. Also, see iPod not recognized when connected to Windows laptop over USB to be sure that your USB ports are supplying enough power.
Avoid connecting to an external USB hub. If a hub must be used, make sure the hub is USB 2.0, and that it has its own power supply. Also, make sure the hub is connected to a high-power USB 2.0 port on your computer.
If the issue persists, try disconnecting other USB devices from the computer such as printers, cameras, scanners, external hard drives, and USB hubs to determine if there is a conflict in the USB chain. -
I have an ipad3. I brought brought a wireless AV Box to view videos on the TV. I have tried this on both hdmi TV an can only get sound no picture. Any help would be appreciated. I am new to iPad so not too tech please.
What iOS in on your iPod? The Users Guide says:
Viewing Photos, Slideshows, and Videos on a TV
You can use the Photos app to view photos, slideshows, and videos on your TV with
any of the following:
Apple Component AV Cable
Â
Apple Composite AV Cable
Â
Apple Digital AV Adapter and an HDMI cable (iPod touch 4th generation)
Â
Apple VGA Adapter and a VGA cable
Â
The Digital AV Adapter supports high-definition video up to 720p with audio.
The Guide also says the Video app can use TV out. -
I installed itunes 11 and now it will not open any help would be GREATLY appreciated!!!
I installed itunes 11 and now it will not open any help would be GREATLY appreciated!!!
Hi
Can you use the mouse to access and start System Preferences?
When you rest the mouse over a dock icon, does its name pop up?
What happens if you open an application by ctrl-clicking on the icon then selecting Open?
Bob -
Start firefox and get to homepage . When proceeding to another link or page firefox stops responding and I get a black screen with a colored border stating at the top of the page that mozilla is not reponding. Try to go back to home page and mozilla shuts down. Any help would be appreciated. Prefer to use firefox over internet explorer in which case the problem is not duplicated. IE9 works fine. Long time firefox user and hope to continue to be. Thanks
TedI created an account just to say that firefox is not what it used to be and I'm very disappointed in it and it's developers. I've been with firefox since the day of it's launch. Every new version after firefox 2 has been a let down--- what's the point when I get the same type of ridiculous crashes and freezes? What really annoys me is when I click "new" to create a new message to send within hotmail and it freezes for about 30 seconds to a minute. This happens every time without fail! I've updated a newer version 3 times and still the same thing. I've noticed that there have been more new releases, but I'm now convinced that it's only for show--- trying to stack up to Opera. Firefox copies off of Opera a lot, but it's too bad the developers can't copy it's stability. Who wants to have to read through forums looking for a fix... who has time for that? I don't want to, but I'm really considering leaving firefox for good. Please, get it together and FIX firefox.
-
I'm using imovie 10.0.3 with OS x Version 10.9.2. or some reason I can't double click on iphoto events to siadplay the pictures within that event. I've rebuilt my iphoto library, but nothing seems to work. Any help would be appreciated.
Hello All,
Also no answer but am having the same problem. All my catalogueing via folders is up in smoke and no external HDs (where I would normally directly store raw footage when importing) showing up on the iMovie interface. It is a pain the arse to go back to the earlier version - why APPLE, pray tell, do you continue to lower expectations user-friendly functions. Shall try the option+open for a library but this too is extremely inconvenient if it works like iPhoto because you have to log out to log in to a new library whereas I just want to be able to see my multiple HDs directly from the iMovie menu and then the folders within folders I have layered in there - to make it easy to FIND STUFF. Wake up Apple, you are NOT meeting your customer's needs or desires.
Thanks to the posters who are helping the rest of us lost in the dark with possible solutions - free fix-its for Apple which they don't deserve.
Maybe you are looking for
-
Focus traversal issue on a panel
Hello Everyone, I am facing a strange issue. I had a panel (BiggerPanel) that has certain text fields, combo boxes and buttons. The tab (focus) order was top to bottom and left to right as it should be. Now I replaced a text field, with a panel (Smal
-
SAP fixed asset add-on. Not able to import master data using upload pgm.
Hi all, I am trying to import fixed asset master data using an excel file into sap B1 2007a patch level 42. I am able to run the import transaction. It tries to process and then giving me a message ' Import end: Number of successfully imported assets
-
Hello Everyone, I'm glad I've paid a visit to the forums this morning. A few things I became aware of because I have; -Didn't even know that there was install issues with CS4 on 10.6.3. Now I know why after re-installing CS4 after a system crash I
-
Erratic performance problems in Oracle 8.0.x
Hi all, We are having a performance problem that appeared somewhere between 8.0.6 and 8.1.5 when using embedded SQL and the ProC compiler under Linux and Solaris. The moment we use client libraries > 8.0.x, things seem to grind to a halt. We are curr
-
0Person to 0employee loading, how to handle start and end date
Hi I need help on some basic understanding of time dependent master data object. In my scenario i am loading 0employee and 0Person from R/3. I need to update 0employee from 0person. 0employee BEGDA ENDDA PERNR Position..