Faglflexa table :Generic datasource

Hi
I have to pull the data from the FAGLFLEXA table.     
im plaaning to create a generic datasource because here we do not have 0fi_gl_14 datasource.
so how can handle delta from faglflexa table.
even can i use old standard datasoucre like 0fi_gl_4
i need to take cost from faglflexa and doctype from bkpf.
the data to be accumaled at region and profit centre hierarcy.
Thanks

Hi you can can create generic extractor based on faglflexa table and use the TIMESTAMP filed from it. Just create view of FM based on your FAGLFLEXA and BKPF of BSIK/BSID table and use TIMESTAMP field.

Similar Messages

  • Generic datasource by function module to fetch data from multiple tables?

    I'm writing a function module to fetch price, for generic datasource.
    At first, extract test is OK. But InfoPackage never stop  when loading data to PSA in BW.
    And I find the example codes:
         OPEN CURSOR WITH HOLD S_CURSOR FOR
          SELECT (S_S_IF-T_FIELDS) FROM SFLIGHT
                                   WHERE CARRID  IN L_R_CARRID AND
                                         CONNID  IN L_R_CONNID.
        ENDIF.                             "First data package ?
    * Fetch records into interface table.
    *   named E_T_'Name of extract structure'.
        FETCH NEXT CURSOR S_CURSOR
                   APPENDING CORRESPONDING FIELDS
                   OF TABLE E_T_DATA
                   PACKAGE SIZE S_S_IF-MAXSIZE.
        IF SY-SUBRC <> 0.
          CLOSE CURSOR S_CURSOR.
          RAISE NO_MORE_DATA.
        ENDIF.
        S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
      ENDIF.
    There using Cursor to fetch data package by package, and raise exception NO_MORE_DATA to stop the loading process.
    Now I fetch data from multiple tables, I don't think I can use Cursor.
    Then How can I handle this?  
    Thanks a lot.

    Thanks
    IF IT_999[] IS INITIAL.
        SELECT A~KNUMH A~MATNR A~KSCHL VKORG VTWEG A~DATBI A~DATAB KBETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
          TABLE TP_DATA
            FROM A999 AS A
              INNER JOIN KONP AS B
                  ON A~KNUMH = B~KNUMH
              INNER JOIN MARA AS C
                 ON A~MATNR = C~MATNR
    *          FOR ALL ENTRIES IN IT_999
                    WHERE
    *      A~KNUMH = IT_999-KNUMH  AND
           ( ( A~KSCHL = 'ZPRC' AND VKORG = 'Z000' AND VTWEG = 'Z1' ) OR
                          ( A~KSCHL = 'ZPRD' AND VKORG = 'A000' AND VTWEG = 'Y3' ) ) AND
    *                      A~DATBI >= SY-DATUM AND
                          LOEVM_KO = ''.
        SELECT A~KNUMH A~MATNR A~KSCHL VKORG VTWEG A~DATBI A~DATAB KBETR AS KHETR  KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
          TABLE TP_DATA
            FROM A999 AS A
              INNER JOIN KONP AS B
                  ON A~KNUMH = B~KNUMH
              INNER JOIN MARA AS C
                 ON A~MATNR = C~MATNR
    *          FOR ALL ENTRIES IN IT_999
                    WHERE
    *      A~KNUMH = IT_999-KNUMH AND
          A~KSCHL = 'ZPR3' AND A~VKORG = 'I000' AND
    *                      DATBI >= SY-DATUM AND
                          LOEVM_KO = ''.
      ENDIF.
      IF IT_997[] IS INITIAL.
        SELECT A~KNUMH A~MATNR A~KSCHL VTWEG A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
          TABLE TP_DATA
            FROM A997 AS A
              INNER JOIN KONP AS B
                  ON A~KNUMH = B~KNUMH
              INNER JOIN MARA AS C
                 ON A~MATNR = C~MATNR
    *          FOR ALL ENTRIES IN IT_997
                    WHERE
    *      A~KNUMH = IT_997-KNUMH      AND
          A~KSCHL = 'ZPRA' AND VTWEG = 'Y1' AND
    *                      DATBI >= SY-DATUM AND
                      LOEVM_KO = ''.
      ENDIF.
      IF IT_996[] IS INITIAL.
        SELECT A~KNUMH A~MATNR A~KSCHL A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
           TABLE TP_DATA
             FROM A996 AS A
               INNER JOIN KONP AS B
                   ON A~KNUMH = B~KNUMH
               INNER JOIN MARA AS C
                  ON A~MATNR = C~MATNR
    *          FOR ALL ENTRIES IN IT_996
                    WHERE
    *      A~KNUMH = IT_996-KNUMH AND
          A~KSCHL = 'ZPRB' AND
    *                       DATBI >= SY-DATUM AND
          LOEVM_KO = ''.
      ENDIF.
      SELECT   MATNR     "u7269u6599u53F7u7801
               MEINH     "u4ED3u50A8u5355u4F4Du7684u5907u7528u8BA1u91CFu5355u4F4D
               UMREZ     "u57FAu672Cu8BA1u91CFu5355u4F4Du8F6Cu6362u5206u5B50
               UMREN     "u8F6Cu6362u4E3Au57FAu672Cu8BA1u91CFu5355u4F4Du7684u5206u6BCD
          FROM MARM
          INTO CORRESPONDING FIELDS OF TABLE IT_MARM
           FOR ALL ENTRIES IN TP_DATA
         WHERE MATNR = TP_DATA-MATNR AND  MEINH = TP_DATA-KMEIN.
      LOOP AT TP_DATA.
        IF TP_DATA-KPEIN NE 0.
          TP_DATA-KBETR =  TP_DATA-KBETR / TP_DATA-KPEIN.
          TP_DATA-KHETR =  TP_DATA-KHETR / TP_DATA-KPEIN.
        ENDIF.
        IF TP_DATA-KSCHL = 'ZPRA'.
    *       TP_DATA-MEINH = 'ZI'.
    *      TP_DATA-KSCHL = 'B4'.
          IF TP_DATA-KMEIN = 'ZI'.
            TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
          ELSE.
            READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
    *           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'CT'.
            TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
    *           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
            TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
          ENDIF.
        ELSEIF TP_DATA-KSCHL = 'ZPRB'.
    *      TP_DATA-KSCHL = 'L0'.
    *       TP_DATA-MEINH = 'ZI'.
          IF TP_DATA-KMEIN = 'ZI'.
            TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
          ELSE.
            READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
    *           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'BAG'.
            TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
    *           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
            TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
          ENDIF.
        ELSEIF TP_DATA-KSCHL = 'ZPRC' OR TP_DATA-KSCHL = 'ZPRD'.
    *       TP_DATA-MEINH = 'ZI'.
          IF TP_DATA-KMEIN = 'ZI'.
            TP_DATA-KHETR = TP_DATA-KBETR * '1.17'.
          ELSE.
            READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
    *           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'WZI'.
            TP_DATA-KBETR = TP_DATA-KBETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
    *           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
            TP_DATA-KHETR = TP_DATA-KBETR * '1.17'.
          ENDIF.
        ELSEIF TP_DATA-KSCHL = 'ZPR3'.
    *      TP_DATA-KSCHL = 'B2'.
          IF TP_DATA-KMEIN = 'ZI'.
            TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
          ELSE.
            READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
    *           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'BAG'.
            TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
    *           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
            TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
          ENDIF.
        ENDIF.
        TP_DATA-MEINH = '01'.
        MODIFY TP_DATA.
    E_T_DATA-MATNR =   TP_DATA-MATNR.
    E_T_DATA-KSCHL =   TP_DATA-KSCHL.
    E_T_DATA-KHETR =   TP_DATA-KHETR.
    E_T_DATA-KBETR =   TP_DATA-KBETR.
    E_T_DATA-KMEIN =   TP_DATA-KMEIN.
    E_T_DATA-DATAB =   TP_DATA-DATAB.
    E_T_DATA-DATBI =   TP_DATA-DATBI.
    APPEND E_T_DATA.
        CLEAR WA_MARM1.
        CLEAR WA_MARM2.
      ENDLOOP.
    Edited by: Shen Peng on Oct 20, 2010 10:09 AM

  • Generic Datasource on table IMRG in R/3- delta on timestamp is it ok ?

    Hi
    I am creating Generic datasource based on table IMRG in R/3, This has stoppages related data. which we need in BI report. There is a field for Time-stamp in the table, i have checked values in table IMRG, but in R/3 it shows no data for the time-stamp.
    Now i want to create delta basis for this generic datasource based on table, so shall i create delta based on time-stamp or date field.  
    If I create delta based on time-stamp will it create problem in delta extraction subsequently? Please share your experience in such a cases.

    There is a field for Time-stamp in the table, i have checked values in table IMRG, but in R/3 it shows no data for the time-stamp.
    Delta specific field should be something which defines changes in your table, not something which is blank always.Based on the change in this delta specific field only delta will be pulled.Having it blank will never pull you delta.
    Hope this helps.

  • Creation of a generic extractor and data source for the FAGLFLEXA table

    Hi All,
    Need to create a generic extractor and data source for the FAGLFLEXA table to support AR reporting. This table contains the necessary profit center information to perform LOB reporting against the AR data.
    Please advice on how to do this.
    Regards, Vishal

    Hi Vishal,
    Its seems a simple a work out.
    1.Go to RSO2 & choose the relevant option ie. whether you want to create Transactional DS, Master Data DS or Text DS.
    2. Name it accordingly & then create.
    3. Give description to it & then give table name FAGLFLEXA.
    4. Save it & activate. If you need it to be delta enabled then click over Delta & you can choose accordingly.
    If you still face some problem then do mail me at [email protected]
    Assign points if helpful
    Regards,
    Himanshu

  • 'table does not exist' when creating generic datasource

    I went to SBIW->Business Content DataSources->Transfer Business Content DataSources-chose "content delta". it said 'comparison bct <-> cust version ' then it counted thru several objects for a few minutes and finished with no warnings.
    then I selected each datasource under co-om-cca and activated those with no problems.
    problem: now when i try to create came generic datasource using co-om-cca application component i get mssg when saving 'the specified table does not exist'...so now it isn't even letting me create a datasource at all using a standard application component either.
    I have been having many problems with creating datasources and using application components and this is why I did the first paragraph because I don't know what else to try.
    Please help, thanks.

    I have answered my own question.  I wasn't entering the view/table and it was my own complete oversight.

  • Generic datasource based on custom table and hierarchy table

    Hi Gurus,
    I have a doubt regarding generic datasource.
    my requirement: to create a datasource with 10 fields. (7 fields from custom table and 3 fields whose values can be derived from a hierarchy table).
    I have a custom table. In this table one field refers to a hierarchy table. Using this hierarchy table, we can derive values to 3 new fields.
    My question is, If i create a generic datasource based on the custom table, how can i include the extra 3 fields which gets values from the hierarchy table.
    Where can i write the logic to extract the values for those 3 fields from the hierarchy table.
    Thanks
    Regards,
    Aarthi
    [email protected]

    Hi Aarthi,
    Sample code in the user exit woul be like this:
    DATA:  i_biw_tab LIKE BIW_MARA_S.
    WHEN '<data source>'.
        LOOP AT i_t_data INTO i_biw_tab.
          SELECT fields
            INTO <table from which you want the value
            FROM <table>
           WHERE <your condition>.
          IF sy-subrc = 0.
                 MODIFY i_t_data FROM i_biw_tab.
          ENDIF.
        ENDLOOP.
    Bye
    Dinesh

  • Problem while creating generic DataSource using table

    Hello all,
    I am creating a generic DataSource using table EKBE. It is giving error " invalid extract structure template EKBE ". The reason is " The system tried to generate an extract structure with the template structure EKBE. This operation failed, because the template structure quantity fields or currency fields, for example, field MENGE refer to a different table (EKPO)".
    Could you suggest how to approach?
    Thanks,
    Zak.

    hi zahir,
    In your case the reference table used for quantity is ekko and the field is meins.
    and the reference table used for currency is ekpo and the field is waers.
    So you are not taking data from a single table. so you better create a view give the table name ekbe and select the corresponding fields you want.
    Add MEINS and WAERS and as well your required field in the view for example Zview and for Quantity field mention Zview as reference table and reference field as MEINS same for WAERS.
    try this if it doent work, tell me what error you are facing.
    with regards!
    ramesh

  • How to catch the delta of generic datasource created on table EBAN?

    Hi Guru,
    I am facing a problem about the delta of generic datasource i created on table EBAN.
    when I convert a PR into PO, this PR was created  several month ago, this PR will not be caught into delta package.
    how to get this PR again after it was converted into a PO?
    many thanks.
    brgds/steve

    hi,
    If you have any fields(calday,timestamp,nemric pointer) in your table , using this fields any one we can enable delta.otherwise one option is there but your table is small valoum of datas.
    first data load(full) r3 to bw side cube,then using open hub service download data from cube to any file (excel ,csv) then r3 side create one table using that flat file, then load download file to r3 new table using (LSMW - tcode r3 side).
    now compare your genric extroction table and new table using ABAP coding , then you have any new record or changed find update new table first then BW side .
    using this type we can enable delta for genric extrocation.
    regards,
    sundar.

  • Problem in creating a generic datasource with infoset

    Dear Expert,
      I have to create a generic datasource with infoset. I linked the infoset with a test program below. In the program, I have one selection option, which is s_order. After creating an infoset and a datasource, this selection option 'SELECT_S_ORDER' is added to my extract structure. However, after try filtering with this SELECT_S_ORDER, it doesn't filter data at all. Why? I want to filter data with my s_order.
    REPORT  ZBI_DS_TEST.
      tables: vbak.
    * DATA
      field-symbols: <vbak>  type vbak.
      data:   t_vbak      type table of vbak,
                w_vbak     type vbak,
                t_vbak2    type table of vbak,
                w_vbak2    type vbak.
    * SELECT-OPTIONS
      selection-screen begin of block b1 with frame title text-001.
        select-options:  s_order   for  vbak-vbeln.
      selection-screen end of block b1.
        start-of-selection.
    * <Query_head>
       perform sub_select_data.
       loop at t_vbak into w_vbak2.
         move-corresponding w_vbak2 to vbak.
    * <Query_body>
       endloop.
    *&      Form  sub_select_data
    *      Select data
    FORM sub_select_data .
        select *
        into    table t_vbak
        from   vbak
        where vtweg = 'IP'.
    ENDFORM.                    " sub_select_data

    What do you mean by linking program with infoset?
    Do you get the field in your RSA3 Tcode?

  • Delta issue on a Generic Datasource

    Hi
       I had a Generic Datasource on a Z table.
       The Z table had a Date field on which Delta is based.The Postings are performed manually.
      How to solve the delta issue in the below scenario.
    Ex; A user made a manual posting with a date 09AUG2010 today and delta is extracted to BW.
        But tommorow a used made another posting with a date 14JULY2010....
    Currently that record is not being extracted....how can i resolve this
    Thanks

    Hi,
    Once the data source is created you will extract the data till that date and as the delta is set it will fetch the newly updated records .But i dont think one can post with the back dates in R/3 side.
    If i'm not wrong if you are asking regarding record got missed out them wht need to be done?
    Then do the repair full request and pull the missed delta records and it wont effect the delta settings.
    Regards
    KP

  • Invalid Extract Structure error while creating "Generic DataSource" on a view...

    Dear All,
    I have created a view on following tables MARA, AFKO and MSEG. The Table/Join condition is as follow:
    AFKO--AUFNR  = MSEG--AUFNR
    AFKO--PLNBEZ = MARA--MATNR
    I have included all the fields from MSEG and other all fields from MARA and AFKO. The view is created successfully and contents/records are also being fetched/displayed from this view.
    See screen shot as well:
    But when I go to RSO2 to create a "Generic DataSource" on this view. I get a series of warning messages and then error message "Invalid Extract Structure" and therefore I'm unable to create my DataSource on this view. See below screen shots of warning and error messages.
    Other warning messages are as follow:
    Field GAMNG with reference field MEINS: Reference table MARA is replaced by ZOXPRD0150
    Field PLSVB with reference field PLNME: Reference table PLKO is replaced by ZOXPRD0150
    Field PLSVN with reference field PLNME: Reference table PLKO is replaced by ZOXPRD0150
    Field LODIV with reference field MEINS: Reference table MARA is replaced by ZOXPRD0150
    Following is the screen shot of error message:
    1. How can I get rid of this error message and be able to create my "Generic DataSource" on top of this "View"?
    2. What should I do to resolve the above warning and error messages?
    I will appreciate your reply.
    Many thanks!
    Tariq Ashraf

    Hi Vipul,
    as you can find in CKIS table, the reference feild for value feild "WERTN" is missing.
    As per the table the reference feild is HWAER. This should have been used in place of FWAER.
    Try mentioning this in your view and this should work.
    Also I am a little enthusiastic to know, what are you trying to get from the datasource.
    If you are trying to get the cost estimate of multi level BOM, not (just one child level), then this approach may not work.
    There is a BAPI that gives such itemization split. Just FYI, in case you are looking for multi level explosion.
    "BAPI_COSTESTIMATE_ITEMIZATION".
    Hope this helps.
    Naveen.A

  • Error when activating an R/3 generic datasource in BW

    Hi
    I've created a generic datasource in R/3 4.6C system using a table view over R/3 standard Project System tables with joins.  This datasource has been activated. I then replicated this generic datasource in BI7 datawarehousing environment.  The replication went ok and I could see the R/3 generic datasource in RSA1.  When I tried to activate this datasource I received this error message:
    Error when activating DataSource ZPROJECT_ATTR Message no. RSO404
    I didnt have similar problem with the other generic datasources.
    I'm currently working on Netweaver 2004s BI support pack 10 environment.
    Please let me know how to fix this problem.
    Many thanks,
    Anthony

    Hi Anthony,
    Do go through the note's detailed text and do listen to this advice from an old man.  Do read the section below in the note and do assign some points to this geezer "lying" on his deathbed.
    Quote from the note (this one rhymes..yaa):
    Source system = R/3 Release 4.0B ff (all subsequent releases including 4.7 and so on)
                = BW Datamart 2.0B, 2.1C, 3.0B, 3.10, 3.50, 7.00 ff
                = CRM release 2.0, 3.0, 4.0 ff
    unquote...
    Cheers
    Neeraj

  • Problem while transporting generic datasource to test box

    Hi Gurus,
    I am trying to transport Generic datasource from SCM Dev to SCM Test box. Datasource is created with custom table in SCM.
    It is throwing me RC8.
    Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Activation Mode)
    DataSource ZGATPUPLOAD does not exist in source system TA6CLNT010 of version A
    Mapping between data source ZGATPUPLOAD and source system TA6CLNT010 is inconsistent
    DataSource ZGATPUPLOAD does not exist in source system TA6CLNT010 of version A
    Field /BIC/ZCSHIPTO will not be delivered from DataSource ZGATPUPLOAD in source system TA6CLNT010
    Field CALWEEK will not be delivered from DataSource ZGATPUPLOAD in source system TA6CLNT010
    Field FIXPEGQTY will not be delivered from DataSource ZGATPUPLOAD in source system TA6CLNT010
    Field LOC will not be delivered from DataSource ZGATPUPLOAD in source system TA6CLNT010
    Field MATNR will not be delivered from DataSource ZGATPUPLOAD in source system TA6CLNT010
    Field PROD_ALLOC_OBJEC will not be delivered from DataSource ZGATPUPLOAD in source system TA6CLNT010
    Field SALESORG will not be delivered from DataSource ZGATPUPLOAD in source system TA6CLNT010
    Field SALES_DIST will not be delivered from DataSource ZGATPUPLOAD in source system TA6CLNT010
    Field SIMID will not be delivered from DataSource ZGATPUPLOAD in source system TA6CLNT010
    Field USER_MOD_QTY will not be delivered from DataSource ZGATPUPLOAD in source system TA6CLNT010
    Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode)
    Reference to transfer structure ZGATPUPLOAD_CA not available. No activation possible.
    Please give me suggestions....

    Are you still looking ans on it?

  • Error while extracting data from Generic datasource

    Hello Gurus,
    I have encountered an error "Errors in source system" with status red while extracting data from generic datasource into DSO.
    I have done below things:-
    1. Checked the jobs in source system, the job is successfully completed
    2. The generic datasource is active and supporting delta with calender day  in source system.
    3. No TRfc error and no idocs stucked.
    4. No short dumps in source system.
    5. The delta queue(RSA7) is showing 0 with status as green.
    6. Replicated the datasource On BW side and also activated the transfer rules by RS_TRANSU_ACTIVATE_ALL
    The problem has not yet solved. Could you guys please suggest me what might be the reason for this error......
    Thanks,
    Sonu

    Hello,
    I have used the generic delta using calender day.
    Safety upper limit : - 1
    Safety lowerr limit : - 0
    I have made the entries in va01 transaction, but the delta queus is not getting updated which should show 1.
    Do Generic extraction require any job to transfer data from Database table to delta queue.
    We are not able to get the delta records on BW side. Please suggest.
    Please suggest.
    Thanks,
    Sonu

  • How to create a generic datasource from function module?

    Dear experts,
    I have created a generic datasource from function module. For this extrator, I created a function module and a structure.
    I have now some difficulties to continue:
    In this function module, i get data from different transparent tables. Then i put these data into an internal table.
    I just don't know what is the relatioin between the structure i defined and this internal table.
    I should make "iTab structure AA" in the source code?
    Thanks

    Hi..
    check this
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
    Generic Extraction via Function Module
    /people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
    1. Create s structure with the fields that you need from the 4 tables . Activate.
    2. Goto SE 80 Select The Function Group , Copy , Select the Function module
    " RSAX_BIW_GET_DATA_SIMPLE " and Give a New name starting With
    Y or Z .
    3. SE37 ->Your Function module name -> Change , In table tab give your structure
    name by deleting the associated type given in " XXXX " .
    4. Now select source code and Do the coding . Give Data source name in Coding .
    In your case you have to take data from more that 1 table .
    5. Activate the Function Group .
    6. In RSO2 Create the Data source , Give the Function Module Name , And Save.
    7. RSA3 -> Give data source name and Check for the Records .
    Creation of custom datasource. (Using function module)
    .Create a function group .
    . Structure ZTXXXX
    Create function module (i.e. ZTESTXXX) .
    . Create the data source using transaction (RSO2).
    . If structure exists for the table parameter of your function module then ok else create a structure for the table parameter ‘        ’.
    Test the datasource in R/3 using transaction RSA3.
    Transfer the data source to BW –System and replicate it in the BW-System.
    Message was edited by:
            shiv

Maybe you are looking for