Failed loading from PSA into Cube

Hello,
I tried to load data from flat file into a cube. I defined the processing as PSA only in Infopackage, the loading was OK, but when I loaded data from PSA to cube, it failed. I checked the PSA, the Status indicator was red, this record is the first record in flat file. The detail error message as follow:
TYPE: Red
Message: Value "01.02.20" of characteristic 0Date is not a number with spaces
ID: BRAIN
NO.: 19
LTxt:
One record in flat file as this:
M-01;GP-01;1000;01.01.2006;2006;K4;20
the corresponded infoobjects:
Material;material group;customer;calend day;fiscal year;fiscal year variant;quantity
I was confused much on the error message, I checked flat file, infosource, transfer and update rules,cube and so on. Could you please help me to solve the problem? thanks advaned!
Ryan

Hi,
0DATE has to be available in internal date fomat to book into the infocube. you have the following options:
-Change the 0DATE-column in your flatfile to the format YYYYMMDD.
-In the transfer structure, choose a conversion routine to convert the external date format to internal date format.
Regards,
Beat

Similar Messages

Error while loading from PSA to Cube. RSM2-704 & RSAR -119

Dear Gurus,
I have to extract about 1.13 million records from set up tables to the MM cube 0IC_C03. While doing, the following two errors occured while loading from the psa to the cube:
Error ID - RSM2 & error no. 704: Data records in the PSA were marked for data package 39 . Here there were 2 errors. The system wrote information or warnings for the remaining data records.
Error ID- RSAR & No. 119: The update delivered the error code 4 .
(Data records for package 39 selected in PSA - 2 error(s). Record 5129 :No SID found for value 'EMN ' of characteristic 0BASE_UOM . Record 5132 :No SID found for value 'EMN ' of characteristic 0BASE_UOM )
I tried to change the defective records in psa by deleting the erraneous field value EMN and tried to load but failed.
Now, my questions are:
How can I resolve the issue ?
(ii) How to rectify the erraneous record ? should we only delete the erraneous field value or delete the entire record from the psa.
(iii) How to delete a record from psa.
Thanks & regards,
Sheeja.

Hi,
Data records for package 39 selected in PSA - 2 error(s). Record 5129 :No SID found for value 'EMN ' of characteristic 0BASE_UOM . Record 5132 :No SID found for value 'EMN ' of characteristic 0BASE_UOM
The issue with record no. 5129 and 5132.
In PSA check errorneous records and it will display only the error records, you just edit as per the require and try reloading into cube.
Deleting single record is not possible.
Let us know if you still have any issues.
Reg
Pra

Difference between Reconstruction and regular load from PSA

Gurus,
      What is the Difference between Reconstruction and load from PSA into datatarget.I understand that during Reconstruction we are not loaing data from R3.
      I have a cube and there are 3 requests in that.I deleted all the requests went to PSA and selected one of the requests and selected reconstruct from this.I went to cube and I can see this selected request in PSA in the reconstruction requests of cube.I submitted the reconstruction/Insert button there.
      Is this the procedure to do reconstruction.If yes then how is it different from regular load from PSA.
Thanks

If look function wise both are doing samething. But there is difference in data flow, PSA is used as staging area. If we choose at first place to load only to PSA and analyze our load do manual editing if needed and then load to data target in this case ofcourse reconstruct option is not available or we could parrallely or sequencialy load to data target beside laoding into PSA. So now having already have loaded into data target if some how we needed to delete and reload we can reconstruct the request or run normal load from PSA.

Loading from PSA

Hi All,
I have \edited the PSA and did some changes to the data.I want to load that to to a cube now.Could any body tell the step how to load from psa to cube?
Thanks
Manish

Hi,
If you have already loaded data in to the InfoCube through PSA and wants to reload the same request from PSA then you need to delete that request from InfoCube first.
After that go to RSA1 -- > PSA Tab --> go to respective PSA --> go to respective Request --> Right Click --> Schedule the Update
It'll take you to InfoPackage there select the data load options like particular InfoProvider. If you delete the specific request from the InfoCube then only you'll get InfoCube to select.
Just schedule it, it'll load the cube now.
hope its clear..
Ram

Issue loading data from PSA to Cube

Hi Gurus:
I have a strange issue. My DELTA load to ODS from R/3 come thru fine. However, the load fails while moving
from ODS to the cube. The error is in 'Fiscal Year/Period'. It is a straight 1:1 map in update rules. If I bring the
data just to PSA there is no error. But when the data moves from PSA to cube, one record in each of the 2
packages the valiue of Fiscal Year/Period changes from "012/2009" to "015/2009".
Any idea why this might be happeing and suggestions on How can I move this data to cube?
Thanks in advance and a very happy New Year!
Best.....PBSW

Are you using or copying Busines Content in your start routines?
In the SD data extractors, the Fiscal Year/Period was provided WITHOUT a Fiscal Variant.
In the Start Routine, the Fiscal Variant was hard coded to "K4" (I think).
If you are using the code and a Fiscal Calendar other than the Hard coded one, you might get this type of error.
If so, consider setting the Fiscal Variant as a constant in the update rules.
Good Luck,
John Hawk

Data load from DSO to Cube in BI7?

Hi All,
We just migrated a dataflow from 3.5 to 7 in development and moved to production. So till now in production, the dataloads happend using the infopackages.
a. Infopackage1 from datasource to ODS and
b. Infopackage2 from ODS to the CUBE.
Now after we transported the migrated dataflow to production, to load the same infoproviders I use
1. Infopackage to load PSA.
2. DTP1 to load from PSA to DSO.
3. DTP2 to load from DSO to CUBE.
step1 and step2 works fine but when I run the DTP2 it is getting terminated. But now when I tried the step b (above), it loads the CUBE fine using the infopackage. So I am unable to understand why the DTP failed and why the infopackage load is successful. In order to use the DTP do we need to do any cleanup when using it for first time? Please let me know if you have any suggestions.
Please note that the DSO already has data loaded using infopackage. (Is this causing the problem?)
Thanks,
Sirish.

Hi Naveen,
Thanks for the Reply. The creation of DTP is not possible without a transformation.
The transformation has been moved to production successfully.

Load from ODS into InfoCube gives TIME-OUT runtime error after 10 minutes ?

Hi all,
   We have a full load from ODS into InfoCube and it was working fine till the last week upto with 50,000 records. Now, we have around 70,000+ records and started failing with TIME_OUT runtime error.
   The following is from the Short Dump (ST22):
   The system profile "rdisp/max_wprun_time" contains the maximum runtime of a
program. The current setting is 600 seconds. Once this time limit has been exceeded, the system tries to terminate any SQL statements that are currently being executed and tells the ABAP processor to terminate the current program.
The following are from ROIDOCPRMS table:
   MAXSIZE (in KB) : 20,000
   Frequency       : 10
   Max Processes : 3
When I check the Data Packages under 'Details' tab in Monitor, there are four Data Packages and the first three are with 24,450 records. I will right click on each Data Package and select 'Manual Update' to load from PSA. When this Manual Update takes more than 10 minutes it is failing with TIME_OUT again.
How could I fix this problem, PLEASE ??
Thanks,
Venkat.

Hello A.H.P,
The following is the Start Routine:
PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TABLES: /BIC/AZCPR_O0400, /BIC/AZCPR_O0100, /BIC/AZCPR_O0200.
DATA: material(18), plant(4).
DATA: role_assignment like /BIC/AZCPR_O0100-CPR_ROLE, resource like
/BIC/AZCPR_O0200-CPR_BPARTN.
$$ end of global - insert your declaration only before this line   -
The follow definition is new in the BW3.x
TYPES:
BEGIN OF DATA_PACKAGE_STRUCTURE.
     INCLUDE STRUCTURE /BIC/CS8ZCPR_O03.
TYPES:
     RECNO   LIKE sy-tabix,
END OF DATA_PACKAGE_STRUCTURE.
DATA:
DATA_PACKAGE TYPE STANDARD TABLE OF DATA_PACKAGE_STRUCTURE
       WITH HEADER LINE
       WITH NON-UNIQUE DEFAULT KEY INITIAL SIZE 0.
FORM startup
TABLES   MONITOR STRUCTURE RSMONITOR "user defined monitoring
           MONITOR_RECNO STRUCTURE RSMONITORS " monitoring with record n
           DATA_PACKAGE STRUCTURE DATA_PACKAGE
USING    RECORD_ALL LIKE SY-TABIX
           SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
CHANGING ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line        -
fill the internal tables "MONITOR" and/or "MONITOR_RECNO",
to make monitor entries
   clear DATA_PACKAGE.
   loop at DATA_PACKAGE.
      select single /BIC/ZMATERIAL PLANT
         into (material, plant)
         from /BIC/AZCPR_O0400
         where CPR_EXT_ID = DATA_PACKAGE-CPR_EXT_ID
         and ( MATL_TYPE = 'ZKIT' OR MATL_TYPE = 'ZSVK' ).
       if sy-subrc = 0.
          DATA_PACKAGE-/BIC/ZMATERIAL = material.
          DATA_PACKAGE-plant = plant.
          modify DATA_PACKAGE.
          commit work.
       endif.
       select single CPR_ROLE into (role_assignment)
                     from /BIC/AZCPR_O0100
                     where CPR_GUID = DATA_PACKAGE-CPR_GUID.
        if sy-subrc = 0.
          select single CPR_BPARTN into (resource)
                     from /BIC/AZCPR_O0200
                     where CPR_ROLE = role_assignment
                     and CPR_EXT_ID = DATA_PACKAGE-CPR_EXT_ID.
               if sy-subrc = 0.
                  DATA_PACKAGE-CPR_ROLE = role_assignment.
                  DATA_PACKAGE-/BIC/ZRESOURCE = resource.
                  modify DATA_PACKAGE.
                  commit work.
               endif.
          endif.
       clear DATA_PACKAGE.
       endloop.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line         -
Thanks,
Venkat.

Unable to load the data into Cube Using DTP in the quality system

Hi,
I am unable to load the data from PSA to Cube using DTP in the quality system for the first time
I am getting the error like" Data package processing terminated" and "Source TRCS 2LIS_17_NOTIF is not allowed".
Please suggest .
Thanks,
Satyaprasad

Hi,
Some Infoobjects are missing while collecting the transport.
I collected those objects and transported ,now its working fine.
Many Thanks to all
Regards,
Satyaprasad

Data load from DSO to cube

Hi gurus
We have a typical problem, we have to combined 2 records into one when they reach to DSO.
One source is flat file and the other is R3. so few fields I am geting from flat file and few from R3 . They are creating one record when they loaded to DSO . Now I am getting one record in active data table but when I load the data to cube from that DSO ( Data is going from change log to cube ) to cube , I am getting 2 seperate records ( one which is loaded from flat file and one which is loaded from R3 ) in cube which I dont want. I want only one record in cube just like i have in my active data table in DSO.
I cant get the data from Active data table because I need delta load.
Would you please advise what can I do to get that one record in Cube?
Pl help

Ravi
I am sending the data thro DTP only but is there any solution to get one record bcos in other scenario I am getting data from 2 different ERP sources and getting one record in DSO and cube as well.
but that is not happening for this second scenario where i am getting data from FLAT file and ERP and traing to create one record.

Partial data loading from dso to cube

Dear All,
I am loading the data from dso to the cube through DTP. The problem is that some records are getting added through data
packet 1 to the cube around 50 crore records while through data packet2 records are not getting added.
It is full load from dso to cube.
I have tried deleting the request and executing DTP but again the same no of records get added to the cube through datapacket 1 and after that records are not added to the cube through datapacket 1 ;request remains in yellow state only.
Please suggest .

Nidhuk,
Data load transfers package by package. Your story sounds like it got stuck in second package or something. Suggest you check package size, try to increase to a higher number to see if anything changes ? 50 records per package kind of low, your load should not spread out into too many packages.
Regards. Jen
Edited by: Jen Yakimoto on Oct 8, 2010 1:45 AM

Error in delta loading from a planning cube

hi all,
I am using a delta load from one planning cube to another.When the changed records are of a magnitude of 100 then it is successful but when the records are of magnitude of 100000 then it stays yellow with no data records sent and eventually fails.the packet size is 20000.
any help is appreciated.

Hello Ajay,
Have you checked that your Request is closed in the planning cube? FM RSAPO_CLOSE_TRANS_REQUEST will do it
It is a customizing issue to tell the infopackage to end "green" when it has no data.
Transaction Spro ==> SAP Netweaver ==> SAP Business Information Warehouse ==> Automated Processes ==> Monitor Settings ==> Set Traffic Light Color. There you have to set the Traffic light on green if no data is available in the system.
Hope that helps
best regards
Yannick

Updating data from PSA to CUBE

Hi Experts,
i got a mismatch between R/3 and BW reports, one document number value has not updated in PSA and INFOCUBE, that's why it is showing wrong value in BW report, i know which value and in which field it has missed.
I want to enter that field value in PSA and again i want to load the data from PSA to CUBE.
is it possible or not,
shell i do like this.
thanks in advance
Venkat

It is very much possible In PSA.
But it is not the best way to do.
Maintain that in PSA and do a delta load to the cube.
Cheers,
Shana
assigning pts is the way of saying thanks in SDN

Error when loading from ODS to Cube

Hello Friends,
I am having trouble loading data from ODS to Infocube in my 2004S system.When loading data i get this message
07/03/2007     13:10:25     Data target 'ODSXYZ ' removed from list of loadable targets; not loadable.
07/03/2007     13:28:42     Data target 'ODSXYZ ' is not active or is incorrect; no loading allowed
I checked for ODSXYZ in my data target but there is nothing by that name.Even the infopackage doesnt have it.What needs to be done.Please help.
Thanks.

Its a expected behavior. When you migrate ur DS, the infopacks associated with it, will grey out all the data targets that they were feeding before, that applies to any infopack you create even after the migration. You womt be able to delete it.
Having said this, this shouldnt impact ur loads from ODS to Cube. As this shoudl be taken care of by ur DTP's rather than ur infopacks.
A few questions:
How are you loading ur cube?
Did the data get thru fine to PSA with the infopack in question?
How did you load ur DSO(assuming the load was successful)?
Message was edited by:
        voodi

Loading from PSA with different process chains at a different time

Hi,
We currently have an issue regarding loading the same data from 2 separate Process Chains from the same datasource at a different time.
Simplified what is happening :
Process Chain 1:
Step 1a = Load 2LIS_13_VDITM into ODS "A"
Step 1b = Load 0FI_GL_4 into ODS "B"
At a later time, (PC1 is ready) =>
Process Chain 2:
Step 1 = Load ODS "A" to ODS "C"
Step 2 = Load 0FI_GL_4 (from PSA) to ODS "C"
Because of dependencies, step 2 from PC2 has to be loaded AFTER Step 1 (with activation) from PC2.
We cannot change Process Chain 1.
What i want to do is load the data from 0FI_GL_4 only to PSA in Process Chain 1 and pick it up again in Process Chain 2. This functionality is available in NW2004S, but not in our version BW 3.0B.
Does anyone have an idea how to do this ?
Thanks,
Pascal

Hi Dinesh,
Thank you for your quick answer.
The problem is i cannot change PC1, but 0FI_GL_4 is loaded with the option into PSA and then immediatly to the target. So data is available in the PSA.
When I try to load data from PSA into ODS "C" in PC2, i get an error saying that the belonging infopackage (from PC1) is not available in this PC and thus cannot be loaded from PSA.
Regards,
Pascal

Restore failed delta from ODS to cube

Hi All,
I have started a delta load from ODS to cube but it has failed abruptly, for some reason, with out extracting even a single record.
I want to restart/re-schedule the load but I am confused how to do that(just a delta or repair/repeat delta).
Can someone please suggest how to proceed.
Rgds,
RPK.

Hi Ravi,
I had to stop the request because of some other issues and now I have to start it again. There is no particular error.
Hi PB,
Thanks a lot for the reply. Are you sure that I have to delete this failed request first? Will it prompt for a repeat delta when I try to schedule it again?
Sorry for asking these questions but just want to make sure about it.
Rgds,
RPK.

Failed loading from PSA into Cube

Similar Messages

Maybe you are looking for