Error in delta loading from a planning cube

hi all,
I am using a delta load from one planning cube to another.When the changed records are of a magnitude of 100 then it is successful but when the records are of magnitude of 100000 then it stays yellow with no data records sent and eventually fails.the packet size is 20000.
any help is appreciated.

Hello Ajay,
Have you checked that your Request is closed in the planning cube? FM RSAPO_CLOSE_TRANS_REQUEST will do it
It is a customizing issue to tell the infopackage to end "green" when it has no data.
Transaction Spro ==> SAP Netweaver ==> SAP Business Information Warehouse ==> Automated Processes ==> Monitor Settings ==> Set Traffic Light Color. There you have to set the Traffic light on green if no data is available in the system.
Hope that helps
best regards
Yannick

Similar Messages

Delta load from ODS to cube failed - Data mismatch

Hi all
We have a scenario where the data flow is like
R/3 table - >dataSrc -- > pSA - >InfoSrc -> ODS ->Cube.
The cube has an additional field called "monthly version"
and since it is a history cube , it is supposed to hold data
snapshots of the all data in current cube for each month .
We are facing the problem that the Data for the current month
is there in the history ODS but not in the cube . In the ODS ->Manage->requests
tab i can see only 1 red request that too with 0 recs.
However ,In the cube -> manage-> reconstruction tab , i can see 2 Red request
with the current month date. Could these red requests be the reason for
data mismatch in ODS and cube .
Please guide as to how can i solve this problem .
thanks all
annie

Hi
Thanks for the reply.
Load to Cube is Delta and goes daily .
Load to ODS is a full on daily basis .
Can you help me how to sort this issue . I have to work directly in production env . so has to be safe and full proof .
Thanks
annie

Delta load from planning area to third party system

Hi All,
Generally we sent full data load from DP planning area to back up cube in BW system..But suppose we are to send delta load from DP planning area to third party BW system, then what changes we need to do on the DP planning area side so that we send all the changed data from livecache. Can this be done in a standard way?
Thanks

Hi Tarun,
It's not possible to extract delta loads from the APO planning areas. The delta loads are only possible with standard BW objects, and planning area is not a BW object.
SAP doesn't provide the functionality to have delta loads when you use export data source based on the planning area.
PS: From backup point of view, anyway having delta load would not make much sense. We take the backup as a snapshot of a particular time, and if restoration is required, based on the request numer or the date of extraction, we restore the relevant data from cube to the planning area.
Thanks - Pawan

Error while loading from PSA to Cube. RSM2-704 & RSAR -119

Dear Gurus,
I have to extract about 1.13 million records from set up tables to the MM cube 0IC_C03. While doing, the following two errors occured while loading from the psa to the cube:
Error ID - RSM2 & error no. 704: Data records in the PSA were marked for data package 39 . Here there were 2 errors. The system wrote information or warnings for the remaining data records.
Error ID- RSAR & No. 119: The update delivered the error code 4 .
(Data records for package 39 selected in PSA - 2 error(s). Record 5129 :No SID found for value 'EMN ' of characteristic 0BASE_UOM . Record 5132 :No SID found for value 'EMN ' of characteristic 0BASE_UOM )
I tried to change the defective records in psa by deleting the erraneous field value EMN and tried to load but failed.
Now, my questions are:
How can I resolve the issue ?
(ii) How to rectify the erraneous record ? should we only delete the erraneous field value or delete the entire record from the psa.
(iii) How to delete a record from psa.
Thanks & regards,
Sheeja.

Hi,
Data records for package 39 selected in PSA - 2 error(s). Record 5129 :No SID found for value 'EMN ' of characteristic 0BASE_UOM . Record 5132 :No SID found for value 'EMN ' of characteristic 0BASE_UOM
The issue with record no. 5129 and 5132.
In PSA check errorneous records and it will display only the error records, you just edit as per the require and try reloading into cube.
Deleting single record is not possible.
Let us know if you still have any issues.
Reg
Pra

Error when loading from ODS to Cube

Hello Friends,
I am having trouble loading data from ODS to Infocube in my 2004S system.When loading data i get this message
07/03/2007     13:10:25     Data target 'ODSXYZ ' removed from list of loadable targets; not loadable.
07/03/2007     13:28:42     Data target 'ODSXYZ ' is not active or is incorrect; no loading allowed
I checked for ODSXYZ in my data target but there is nothing by that name.Even the infopackage doesnt have it.What needs to be done.Please help.
Thanks.

Its a expected behavior. When you migrate ur DS, the infopacks associated with it, will grey out all the data targets that they were feeding before, that applies to any infopack you create even after the migration. You womt be able to delete it.
Having said this, this shouldnt impact ur loads from ODS to Cube. As this shoudl be taken care of by ur DTP's rather than ur infopacks.
A few questions:
How are you loading ur cube?
Did the data get thru fine to PSA with the infopack in question?
How did you load ur DSO(assuming the load was successful)?
Message was edited by:
        voodi

Data load from DSO to cube

Hi gurus
We have a typical problem, we have to combined 2 records into one when they reach to DSO.
One source is flat file and the other is R3. so few fields I am geting from flat file and few from R3 . They are creating one record when they loaded to DSO . Now I am getting one record in active data table but when I load the data to cube from that DSO ( Data is going from change log to cube ) to cube , I am getting 2 seperate records ( one which is loaded from flat file and one which is loaded from R3 ) in cube which I dont want. I want only one record in cube just like i have in my active data table in DSO.
I cant get the data from Active data table because I need delta load.
Would you please advise what can I do to get that one record in Cube?
Pl help

Ravi
I am sending the data thro DTP only but is there any solution to get one record bcos in other scenario I am getting data from 2 different ERP sources and getting one record in DSO and cube as well.
but that is not happening for this second scenario where i am getting data from FLAT file and ERP and traing to create one record.

Short dump error for delta load to 0CFM_C10 via 0CFM_DELTA_POSITIONS flow

hi all,
i am getting short dump error for delta load to 0CFM_C10 via 0CFM_DELTA_POSITIONS flow.
not able to figure out the actual issue and how to solve it.
can anyone suggest?
below is the details of the short dump
Short text
    Exception condition "UNKNOWN_TRANSCAT" raised.
What happened?
    The current ABAP/4 program encountered an unexpected
    situation.
What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    A RAISE statement in the program "CL_SERVICE_TRG================CP" raised the
     exception
    condition "UNKNOWN_TRANSCAT".
    Since the exception was not intercepted by a superior
    program, processing was terminated.
    Short description of exception condition:
    For detailed documentation of the exception condition, use
    Transaction SE37 (Function Library). You can take the called
    function module from the display of active calls.
How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "RAISE_EXCEPTION" " "
    "CL_SERVICE_TRG================CP" or "CL_SERVICE_TRG================CM003"
    "SORT_TRANSACTIONS"
    or
    "CL_SERVICE_TRG================CP" "UNKNOWN_TRANSCAT"
    or
    "SBIE0001 " "UNKNOWN_TRANSCAT"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.

Hi,
It seems like some routine are there and check your rotines , transformation etc.
Regards
sivaraju

Delta load from r3 to bw ?

i have one question on the mechanism of data transfer from r3 to bi 7.0. the followings is my concerns:
scenario:
The total numer of data is 1000 rows and these rows are seperated into 10 data package , each package contains 100 rows.
Now bw is trying to recieve these 10 packages from r3 in sequence.
When 5 data packages have been transfer to bi psa. the network is broken and the tranfer is canceled at the 6th data package.
What i want to know is when the network is reconnected ,Does the transfer start from the 6th data package?
How to find out whether its a delta load or a full load if a transfer is scheduled from r3 to bw ? For both CUBE & ODS.
How to find out how many records have been transfered from r3 to bw while the transfer has ended in
the middle ? I mean how to check how many records have been successfully transfered from r3 to cube/ods .Please tell me for ods as well as cube.
Is the continuation of transfer process is same for both ODS & INFOCUBE, if it ends in the middle ?
What is the procedure for full load & Delta load in case of CUBE & ODS ? I mean how to reschedule the transfer.
And if the whole scenario is is in the support, SO I will be handling these issues on the live production server. Am I right ? So in this case my user id should have access to all the production r3 and production bw to do these change status to red and delete the request and reload the request etc., So I should be logging on to the production server and do all the manipulation, Am I right ?
Last doubt, what is repair request and so if the transfer stops in the middle we change the status to red and reload the request again , Is it called repair request ?
What is the difference between repeat delta & repair request & repair delta ? When do we choose these options, In which scenarios ?
How do we schedule a daily load job from r3 to bw without the use of process chains ? I mean daily it should fetch the records from r3 to bw from the SD datasources at 10.00 PM ,how do we do that ?
Please I am having all these doubts and I want you SAP experts to answer them please so that I can clear my doubts in production support . I really appreciate if someone explain me the scenarios here. It will be a really great help if someonce clears these doubts.

Hi......
What i want to know is when the network is reconnected ,Does the transfer start from the 6th data package?
If your connection is broken in between......inspite your load is through PSA...........you have to delete the request from the target(after making the QM status red)............then you have to reload it again............But before repeating the load check the connection is ok or not in SM59........
How to find out whether its a delta load or a full load if a transfer is scheduled from r3 to bw ? For both CUBE & ODS
This you can check in IP scheduler in the Update tab...........whether it is delta or full load.......
or you can also check in IP monitor(You can go here through RSMO..........IP monitor screen will open directly here............or you can also go through RSA1>> Find your IP >> Double click on it >> Click on the monitor icon in the top >> From the you will go to the IP monitor>> the under the Header Tab you can see whether it is a delta or Full update...........
Or you can check the datasource also..........
If it is a generic datasource go to RSO2..........and check...........If it is a standard datasource check it in RSA5...........
How to find out how many records have been transfered from r3 to bw while the transfer has ended in the middle ? I mean how to check how many records have been successfully transfered from r3 to cube/ods .Please tell me for ods as well as cube
Your load cannot be ebded in the middle.........it can failed.............if it fails then you have to delete the request from the target..........and then repeat the load.......
Is the continuation of transfer process is same for both ODS & INFOCUBE, if it ends in the middle
Yes.........
What is the procedure for full load & Delta load in case of CUBE & ODS ? I mean how to reschedule the transfer
If a full or delta load fails after extraction got completed due lock issue or SID issue.....etc..........and if you load is through PSA.............then just delete the request from the target without making the QM status red.......and reconstruct the request.........no need to repeat the whole load again........
But if you r load is not through PSA..........then make the QM status red........delete the request from the target........and repeat the load...........
And if the whole scenario is is in the support, SO I will be handling these issues on the live production server. Am I right ? So in this case my user id should have access to all the production r3 and production bw to do these change status to red and delete the request and reload the request etc., So I should be logging on to the production server and do all the manipulation, Am I right ?
Yes.......
What is repair request and so if the transfer stops in the middle we change the status to red and reload the request again , Is it called repair request or reload request?
Suppose you delta load has failed ............and you have deleted the request from the target without making the QM status red............In this case your data will be lost and your delta mechanism will get corrupted............In this situation.............
1) Delete the init flag........
2) You have to do Full repair..........(After filling the set up table)
3) Init without data transfer to set back the init flag
4) Then Delta upload.............
In case of an ODS............you cannot load Full update and delta upload parrallely..............Your ODS activation will fail...........suppose you want full upload in the ODS..............then you have to go for Full repair............
What is the difference between repeat delta & repair request & repair delta ? When do we choose these options, In which scenarios ?
I think Full repair concept is now clear............
Suppose your delta load fails...........After that you delete the request after making the QM status red............Then system will ask for a repeat delta when you will try to repeat the load...........which means it will pick the same delta records of the failed load..........
How do we schedule a daily load job from r3 to bw without the use of process chains ? I mean daily it should fetch the records from r3 to bw from the SD datasources at 10.00 PM ,how do we do that ?
This you can do via infopackage or infopackage group...........schedule it at the specific time.....
Check these links :
http://help.sap.com/saphelp_nw04/helpdata/en/20/ad673844a7114be10000009b38f842/frameset.htm
Re: Schedule Infopackage for last day of a fiscal period
Hope this helps you.........
Regards,
Debjani...........

Process for Flat file delta load from Application server to transactional??

I want to do a flat file extraction in delta loads from application server and that should be loaded into a transactional cubes scheduling a process chain.
Can any one help with ABAP code and step by step process for this?
Thank you
Devi

Hi Devi,
As per your explaination, you want to load a list of files from application server using process chain.
You can do this with below steps.
1) Create a Event and call event to run Process chain multiple times.
2) Put all filenames in a file say, source-File
3) Write a rooting to read filename from Source-File and trigger InfoPackage
4) At the end of the process chain create new customized program which will delete first line from Source-File so that it will take next file in next run as well as delete currently loaded file. Once this is done trigger event again to start process chain again.
Regards,
Ganesh

Can I do Parallel Full loads from ODS to Cube.

Hai,
Usually I will do one a full update load from OD'S to Cube. to speed up the process can I do parallel Full update loads from ods to Cube?
Please advise.
Thanks, Vijay,

Assuming that the only connection we are talking about is between a single ODS and a single Cube.
I think the only time you could speed anything up is in full drop an reload scenario. You could create multiple InfoPackages based on selection and execute them simultaneously.
If the update is a delta there is really no way to do it.
How many records are we talking about? Is there logic in the update rule?

Data load from DSO to Cube in BI7?

Hi All,
We just migrated a dataflow from 3.5 to 7 in development and moved to production. So till now in production, the dataloads happend using the infopackages.
a. Infopackage1 from datasource to ODS and
b. Infopackage2 from ODS to the CUBE.
Now after we transported the migrated dataflow to production, to load the same infoproviders I use
1. Infopackage to load PSA.
2. DTP1 to load from PSA to DSO.
3. DTP2 to load from DSO to CUBE.
step1 and step2 works fine but when I run the DTP2 it is getting terminated. But now when I tried the step b (above), it loads the CUBE fine using the infopackage. So I am unable to understand why the DTP failed and why the infopackage load is successful. In order to use the DTP do we need to do any cleanup when using it for first time? Please let me know if you have any suggestions.
Please note that the DSO already has data loaded using infopackage. (Is this causing the problem?)
Thanks,
Sirish.

Hi Naveen,
Thanks for the Reply. The creation of DTP is not possible without a transformation.
The transformation has been moved to production successfully.

Partial data loading from dso to cube

Dear All,
I am loading the data from dso to the cube through DTP. The problem is that some records are getting added through data
packet 1 to the cube around 50 crore records while through data packet2 records are not getting added.
It is full load from dso to cube.
I have tried deleting the request and executing DTP but again the same no of records get added to the cube through datapacket 1 and after that records are not added to the cube through datapacket 1 ;request remains in yellow state only.
Please suggest .

Nidhuk,
Data load transfers package by package. Your story sounds like it got stuck in second package or something. Suggest you check package size, try to increase to a higher number to see if anything changes ? 50 records per package kind of low, your load should not spread out into too many packages.
Regards. Jen
Edited by: Jen Yakimoto on Oct 8, 2010 1:45 AM

Table on delta loads from data mart

Hi,
I am loading data from two DSO's (let's call them A and B) to another DSO (B) in BI 7 with a BW3.5 delta infopackage.
Now I want to know where I can find information on the timestamp or last request from the last delta load from A and B to C.
So in fact I would like to know how the system knows which requests in A en B have not been loaded to C yet at the next delta load.
In which table can I find the information for ODS A and B that is used by the system to define what data in the change log has been loaded or not to ODS C or other targets. (In fact I should have a comparison table in BW as ROOS* in R3)
Thanks in advance!
Kind regards,
Bart

Hi Guys,
Thanks for the answers.
I know how to check everything in the Workbench, but I want to know where the information of the delta is stored technically.
Just for the sake of completeness:
Due to some issues; several successive loads from A and B were correctly loaded into DSO C (the 'new' table), but could not be activated. It is not possible to do a repeat or anything else. I am not going into too much detail, but just take this for granted.
The only way we can 'solve' the problem is to make the system believe that the 3 last loads (activated data) in A and the two last loads in B have not been loaded to C yet. Just deleting the last delta's in C and do a new delta from A and B to C will not work.
Therefore I want to 'manipulate' the table that is being read by a delta load. If I can change the timestamp or request numbers in that table, I can make the system believe that some requests have not been loaded to C yet.
Dirty, but it should work I think. But I am still figuring out what table contains information about the datamart data source (8A and 8B) and the last delta load to the targets.
Hope this is more clear.
Thanks in advance!
Kind regards,
Bart

Loading from ODS to Cube in process chain

Hi Experts,
How can I do a full load from ODS to cube when using further processing in process chain? Your help is much appreciated.
Thanks,
Bill

Hi,
You can use a DTP for this.
Create transformation between DSO and cube.
Create DTP and run it.
Loading data from one cube to another cube.
Cube to cube data loading
how to upload data from cube to cube
Can we pull data from one cube to another cube
Data Load Steps:
Reading data from another cube
Hope this helps.
Thanks,
JituK

Index for loads from ODS To Cube

The load from ODS to cube is taking a long time - In the start routine another ODS is being looked up - The keys for look up is say X and Y
There is already an index existing on keys X , Y & Z -
Will this index be used while doing the select on that ODS or I need to create a new index with only X and Y keys ?
Thnx

When you are running the start routine - run an SQL trace - ST05 - that will tell you if the index is being used.
Arun

Error in delta loading from a planning cube

Similar Messages

Maybe you are looking for