Failed to add item: Generic file I/O error

One of our iPhone users once in a while gets this response in e-mail from our mobility server since we updated it to Mobility 2.0.1.
From: Mobility Administrator
Date: 18 Jun 2014 22:56:26 GMT+2
To: "Username" <[email protected]>
Subject: Failed to Add Item
Mobility failed to add the following item because: Generic file I/O error
Item Type: Email
Subject: Re: Project blabla
From: Mobility Administrator
Date: 17 Jul 2014 23:00:48 GMT+2
To: "Username"
Subject: Failed to Add Item
Mobility failed to add the following item because: Generic file I/O error
Item Type: Email
This one came two times with only 3mins between. Was a response to separate e-mails.
Strange symptom: The message is saved, sent and delivered anyways.
Occurrence: maybe once every 4 weeks.
Sent to both internal as external addresses.
Plenty of free space on both the Mobility and GWIA server.
Update order: Data Synchronizer 1.2.5 to 2.0.0 (CD update) and then through yast-patterns to 2.0.1 everything according to the upgrade manual.
Update date: 26/may/2014
All hard disks in SAN are fine, running on VM SLES11SP2
Any ideas what might be causing this?

In article <[email protected]>, Jvzuijlen wrote:
> @konecnya: I'm not sure which volume type was used as this is our GW
> administrators job, but reading the installation documentation i think
> it is an NSS volume specially created for it. It's SLES11SP2 running on
> XenServer. The GRPWISE partition is: /dev/xvdb
that tells me more about the underlying XEN side, i.e. What 'hardware' is
in use. A df -h can tell better if it is an NSS volume, as per this
example.
Filesystem Size Used Avail Use% Mounted on
/Dev/pool/MAIL 750G 310G 441G 42% /opt/novell/nss/mnt/.pools/MAIL
MAIL 600G 308G 293G 52% /media/nss/MAIL
>
> But i think the first thing we should test is working with the backup
> settings. Probably the backup is set to lock the files during backup.
> Our administrator will look at this when he's back from his holidays.
Has your administrator had a chance to look into this yet? Backups do
need to respect databases better than just locking their files, it needs
to be a cooperative action.
Andy of
KonecnyConsulting.ca in Toronto
Knowledge Partner
http://forums.novell.com/member.php/75037-konecnya
If you find a post helpful and are logged in the Web interface, please
show your appreciation by clicking on the star below. Thanks!

Similar Messages

V8.2.1: generic file i/o error while loading VI's

Hello,
I had a large LV application open and running fine. I closed it, and upon re-opening the top-level VI it gives "Generic File I/O Error" on several sub-VI's (belonging to me, not LV). Opening those sub VI's individually reveals no problem at all, and in any case the whole code base lives in a Subversion repository and I have tried checking out a fresh copy of the whole source code tree and the problem re-appeared. Before Labview displays the "File I/O error" it will hang for several minutes with no disk or CPU activity.
I just tried checking out a fresh copy of the source tree on a separate computer. Now Labview is hanging while loading "<vilib>:\DAQmx\create\channels.llb\DAQmx Create Channel (CI-GPS Timestamp).vi" after having managed to load 920 VI's. On edit: I spoke too soon. It is now duplicating the "Generic File I/O Error" on one of my sub VI's.
If anyone has any clue to this strange behavior please let me know.
Thank you,
-Brian
Message Edited by brian_g on 04-08-2008 11:43 AM
Message Edited by brian_g on 04-08-2008 11:44 AM

What I found was this...
My code calls a bunch of subVI's in another directory. Those subVI's in turn had some unwise paths saved in some of them that loaded other subVI's from a network shared drive instead of the local disk directory.
The network shared drive had been taken off line since the computer was delivered to a customer last Friday. When LV tried to load the VI's from the shared drive, it would hang for about 5 minutes, then give the "Generic File I/O Error" with an "Ok" button to continue. I eventually sat and did this for about 13 VI's, taking most of an hour while waiting for the network reads to timeout.
Once my now-broken application loaded I was able to successfully re-direct the missing VI's to the local disk, resolving the problem.
The "Generic File I/O Error" message could not be less useful in this case and I'm rather irritated by the genericity of the message. Something like "Network read failed" would have immediately illustrated the problem and kept me from wasting a whole lot of time deciphering it.

Generic file I/O error. Cannot save VI "filename.VI"

Hi, I have LV 8.2. I am having problems saving VI's after editing them. I am getting the message:
Generic file I/O error. Cannot save VI "filename.VI"
I can recreate the problem by creating a blank VI, placing a property node on the block diagram, right clicking on property and choosing, select property and in the window that pops up expanding Application and clicking on Directory path and clicking OK. I save this VI to disk. Then I load the file again and delete the property node. Now if I try to save that I get: Generic file I/O error. Cannot save VI "filename.VI"
Furthermore with the real VI that I am having problems with. If, when I get the cannot save message, I do a "Save as" and save a copy as "filename backup" and then quit labview without saving the "filename" vi, when I run LabVIEW again I get:
The last time you ran LabVIEW, an internal rror or crash occured at save.cpp, line 821.
I click investigate internal error message now and get told there is a logfile of the error. The contents of the file on one occasion were, quote:
#Date: Thu, 9 Nov 2006 10:56:40 a.m.
#OSName: Windows NT
#OSVers: 5.1
#AppName: LabVIEW
#Version: 8.2
#AppKind: FDS
#AppModDate: 07/27/2006 00:08 GMT
.\panel\save.cpp(821) : DWarn: failed to find instance vi we're holding, caller vi: [VI "Spreeta Automatic Fluidics.vi" (0x05332ed0)] ident: [LinkIdentity "Instance 43 26Spreeta Automatic Fluidics .vi" [ Main Application Instance]
$Id: //labview/branches/Europa/dev/source/panel/save.cpp#112 $
0x008CCBB6 - LabVIEW <unknown> + 0
0x008D17CE - LabVIEW <unknown> + 0
0x0100F864 - LabVIEW <unknown> + 0
0x00528E26 - LabVIEW <unknown> + 0
0x00529342 - LabVIEW <unknown> + 0
0x0052960C - LabVIEW <unknown> + 0
0x004D6D2F - LabVIEW <unknown> + 0
0x004D7C95 - LabVIEW <unknown> + 0
0x004D7CD8 - LabVIEW <unknown> + 0
0x004DBA95 - LabVIEW <unknown> + 0
0x004DBD50 - LabVIEW <unknown> + 0
0x0051FD4C - LabVIEW <unknown> + 0
0x0051FD6F - LabVIEW <unknown> + 0
0x0122CA73 - LabVIEW <unknown> + 0
0x77E735DD - kernel32 <unknown> + 0
.\panel\save.cpp(821) : DWarn: failed to find instance vi we're holding, caller vi: [VI "Spreeta Automatic Fluidics 9 nov BU1.vi" (0x05332ed0)] ident: [LinkIdentity "Instance 45 26Spreeta Automatic Fluidics .vi" [ Main Application Instance]
$Id: //labview/branches/Europa/dev/source/panel/save.cpp#112 $
0x00D0FE4B - LabVIEW <unknown> + 0
0x008C8E17 - LabVIEW <unknown> + 0
0x008D1726 - LabVIEW <unknown> + 0
0x008D212C - LabVIEW <unknown> + 0
0x00C41E5E - LabVIEW <unknown> + 0
0x00C46F31 - LabVIEW <unknown> + 0
0x00C4796D - LabVIEW <unknown> + 0
0x00C497C6 - LabVIEW <unknown> + 0
0x004CCB39 - LabVIEW <unknown> + 0
0x004D7C95 - LabVIEW <unknown> + 0
0x004DF19A - LabVIEW <unknown> + 0
0x77D48654 - USER32 <unknown> + 0
0x77D48723 - USER32 <unknown> + 0
0x77D48999 - USER32 <unknown> + 0
0x77D48FD2 - USER32 <unknown> + 0
End of Quote:
Any ideas?

Hello,
Sorry you've encountered this problem. The cpp error is a known issue, which is filed under corrective action request number : 42BI4OO5. In a nutshell, this means R&D is looking into the problem. I attempted to reproduce the problem as you described below, but I did not get the "Generic file I/O error" as you did.
If you have any further insight or detail which perhaps is the key to reproducing this, please repost, and I'll try to reproduce this again! In the mean time, does it help to copy and paste your code to a new VI, or does that VI suffer the same problem?
Thank you,
Best Regards,
JLS
PS -
Standard CAR Response:
"This was reported to R&D (42BI4OO5 CAR ID) for further investigation. Thanks for the feedback!"
Best,
JLS
Sixclear

Get Generic File I/O Error when running DAQ Reference Design

I Get a Generic File I/O Error when trying to Save Data to Disk in Data Acquisition Reference Design.lvproj from daq_ref_app_v10.zip in LabVIEW 9, If I configure to simulate one channel, start the acquisition, stop the acquisition and then save the data to disk, I get the generic file I/O and:
Error 6 occurred at TDMS Open in Data Acquisition Reference Design.lvlib:Logging [TDMS].lvlib:TDMS Data Logging.vi->Data Acquisition Reference Design.lvlib:Main.vi
Shouldn't this work without error?
Should NI distribute Reference Desgins that work without errors?
What is the problem with this application?

This error usually occurs because of malformed file paths. Put an indicator on the path before the TDMS Open so you can see the path explicitely. Make sure you have full permissions for the directory in which you will be saving and make sure that the path isn't greater than 255 characters.
Have a great day!
Tanya V
National Instruments
LabVIEW Platform Product Support Engineer

Remove-Item & Program Files folder: permissions error

I am attempting to use Remove-Item to delete a file in Program Files and getting a permissions error. But, I am a local admin, and I tried running the script as administrator. I have also tried -Force, to no avail. I hope I don't have to go back to the DOS
kludge I used in VBScript.
Any thoughts?
Gordon

Well, this is odd. I tried doing it in the ISE, super simple, just Remove-Item and the raw path. Errors. But I verified that the folder in question is set to read only. So in the ISE I added -Force. And it worked.
So I went back to my code and added -Force back in. And it worked. I assume if I misspelled it or something I would get an error, and I can't imagine the order makes any difference. May be that midnight is just a bit late to be playing in this sandbox.
EDIT: The plot thickens. I have another folder giving me grief, but this folder actually says in Explorer that I don't have permission to view the folders permissions. this is a lame leftover folder after a (typically incomplete) Windows uninstall. Is there
perhaps a PowerShell way of taking ownership of a folder like this? In my VBScript version I actually used DOS commands to do the deletes, and they all worked.
Thanks!
Gordon

Users can't add items to their agendas - Module errors

There was a server crash recently and now some users are getting errors when
they try to connect or make any updates to their Calendar. Some of the errors
that are getting displayed to a pop up box are:

"Module agenda fr.cpp label 4334" 
"Module agenda vw.cpp label 124,service error #0x13201"

Whenever the server is abruptly shutdown, there is the likely probability that
there has been some database corruption, especially when errors start appearing
on the client. 
There is a tool, called /users/unison/bin/unidbfix that will need to be executed
when the server is down that will clean up the database. Please refer to the
Calendar Server Administrators Guide for details on this command, as it should
be used VERY CAREFULLY.

If problems still persist afterwards, check which version of the tool that you
are using: 
# unidbfix -v 
A.01.20 
and contact Technical Support with this information and the dbfix.log that the
tool creates.

Welcome to Apple Discussions.
The Dock did not return to default on that command?
Try again and also delete username/Library/Preferences/com.apple.finder.plist
If it's still no-go create a new User go to System Preferences >> Accounts >> "+" (make it an admin acct) and test the Dock in this new account, if it works the problem is isolated to your User and not systemwide.
Let us know.
EDIT: Also are you running any enhancement software?
-mj
Message was edited by: macjack

CIFS[17138]: WARNING: CODIR: Failed to add share "MDATA" to

Can someone tell me how to get rid of the message
Code:
CIFS[17138]: WARNING: CODIR: Failed to add share "MDATA" to eDirectoy. Error: 0

Originally Posted by susehoush
cluster -> yes (3node sles10sp3+oes2sp3)
There is a nss volume object and a pool object and their attributes seem to be ok.
We also get the following 2 errors:
Code:
CIFS[17138]: ERROR: ENTRY: CIFSNDSGetCIFSServerInfo: isVirtualServer = FALSE, uServerVersion = %U, aServerVersion = e, expected = %U
ERROR: CODIR: LockDirCacheEntry failed to open file for User
Ok, This thread might be of interest (mainly the clarification in post #25) http://forums.novell.com/forums/nove...ols-howto.html
And the related TID (only as a reference in this case, not meant to apply that added python script) : CIFS not enabled properly on cluster resource that was created before upgrading to OES2 SP2
Curious if you are trying to add CIFS after having created the resources? But then still, it should not be an issue anymore (as in should have been fixed).
-Willem

ImageMagick fails to convert a PDF file (GhostScript can't find file?)

I was trying to convert a .pdf file into a .png file with imagemagick (here is the sample pdf file: http://ompldr.org/vY2ljcg ).
However, apparently ImageMagick already failed simply opening the file:
$ convert main.pdf main.png
Unrecoverable error: rangecheck in .putdeviceprops
sfopen: gs_parse_file_name failed.
./base/gsicc_manage.c:866: gsicc_open_search(): Could not find lab.icc
| ./psi/zusparam.c:856: set_lab_icc(): cannot find default lab icc profile
convert: Postscript delegate failed `main.pdf': No such file or directory @ error/pdf.c/ReadPDFImage/665.
convert: missing an image filename `main.png' @ error/convert.c/ConvertImageCommand/3016.
Any ideas?

put it this way. if all PDF creator produces only standard PDF, then ghostscript is fine. But most PDF creator don't (except Adobe Acrobat). So a compatible pdf reader need handle non-standard PDFs. It's a long-term boring maintaining job which need much human resource.
My impression is poppler's community is the most active one which means it has more volunteers to fix bugs.
I am familiar with all the open sourced PDF engines because I did PDF application for 3 years.
Last edited by redguardtoo (2012-01-30 06:04:58)

How can i get also the files in the root directory and how can i for testing add items of IEnumerable FTPListDetail to List string ?

What i get is only the directories and files that in other nodes. But i have also files on the root directory and i never
get them. This is a screenshot of my program after i got the content of my ftp. I'm using treeView to display my ftp content:
You can see two directories from the root but no files on the root it self. And in my ftp server host i have files in the root direcory.
This is the method i'm using to get the directory listing:
public IEnumerable<FTPListDetail> GetDirectoryListing(string rootUri)
var CurrentRemoteDirectory = rootUri;
var result = new StringBuilder();
var request = GetWebRequest(WebRequestMethods.Ftp.ListDirectoryDetails, CurrentRemoteDirectory);
using (var response = request.GetResponse())
using (var reader = new StreamReader(response.GetResponseStream()))
string line = reader.ReadLine();
while (line != null)
result.Append(line);
result.Append("\n");
line = reader.ReadLine();
if (string.IsNullOrEmpty(result.ToString()))
return new List<FTPListDetail>();
result.Remove(result.ToString().LastIndexOf("\n"), 1);
var results = result.ToString().Split('\n');
string regex =
@"^" + //# Start of line
@"(?<dir>[\-ld])" + //# File size
@"(?<permission>[\-rwx]{9})" + //# Whitespace \n
@"\s+" + //# Whitespace \n
@"(?<filecode>\d+)" +
@"\s+" + //# Whitespace \n
@"(?<owner>\w+)" +
@"\s+" + //# Whitespace \n
@"(?<group>\w+)" +
@"\s+" + //# Whitespace \n
@"(?<size>\d+)" +
@"\s+" + //# Whitespace \n
@"(?<month>\w{3})" + //# Month (3 letters) \n
@"\s+" + //# Whitespace \n
@"(?<day>\d{1,2})" + //# Day (1 or 2 digits) \n
@"\s+" + //# Whitespace \n
@"(?<timeyear>[\d:]{4,5})" + //# Time or year \n
@"\s+" + //# Whitespace \n
@"(?<filename>(.*))" + //# Filename \n
@"$"; //# End of line
var myresult = new List<FTPListDetail>();
foreach (var parsed in results)
var split = new Regex(regex)
.Match(parsed);
var dir = split.Groups["dir"].ToString();
var permission = split.Groups["permission"].ToString();
var filecode = split.Groups["filecode"].ToString();
var owner = split.Groups["owner"].ToString();
var group = split.Groups["group"].ToString();
var filename = split.Groups["filename"].ToString();
var size = split.Groups["size"].Length;
myresult.Add(new FTPListDetail()
Dir = dir,
Filecode = filecode,
Group = group,
FullPath = CurrentRemoteDirectory + "/" + filename,
Name = filename,
Owner = owner,
Permission = permission,
return myresult;
And then this method to loop over and listing :
private int total_dirs;
private int searched_until_now_dirs;
private int max_percentage;
private TreeNode directories_real_time;
private string SummaryText;
private TreeNode CreateDirectoryNode(string path, string name , int recursive_levl )
var directoryNode = new TreeNode(name);
var directoryListing = GetDirectoryListing(path);
var directories = directoryListing.Where(d => d.IsDirectory);
var files = directoryListing.Where(d => !d.IsDirectory);
total_dirs += directories.Count<FTPListDetail>();
searched_until_now_dirs++;
int percentage = 0;
foreach (var dir in directories)
directoryNode.Nodes.Add(CreateDirectoryNode(dir.FullPath, dir.Name, recursive_levl+1));
if (recursive_levl == 1)
TreeNode temp_tn = (TreeNode)directoryNode.Clone();
this.BeginInvoke(new MethodInvoker( delegate
UpdateList(temp_tn);
percentage = (searched_until_now_dirs * 100) / total_dirs;
if (percentage > max_percentage)
SummaryText = String.Format("Searched dirs {0} / Total dirs {1}", searched_until_now_dirs, total_dirs);
max_percentage = percentage;
backgroundWorker1.ReportProgress(percentage, SummaryText);
percentage = (searched_until_now_dirs * 100) / total_dirs;
if (percentage > max_percentage)
SummaryText = String.Format("Searched dirs {0} / Total dirs {1}", searched_until_now_dirs, total_dirs);
max_percentage = percentage;
backgroundWorker1.ReportProgress(percentage, SummaryText);
foreach (var file in files)
TreeNode file_tree_node = new TreeNode(file.Name);
file_tree_node.Tag = "file" ;
directoryNode.Nodes.Add(file_tree_node);
numberOfFiles.Add(file.FullPath);
return directoryNode;
Then updating the treeView:
DateTime last_update;
private void UpdateList(TreeNode tn_rt)
TimeSpan ts = DateTime.Now - last_update;
if (ts.TotalMilliseconds > 200)
last_update = DateTime.Now;
treeViewMS1.BeginUpdate();
treeViewMS1.Nodes.Clear();
treeViewMS1.Nodes.Add(tn_rt);
ExpandToLevel(treeViewMS1.Nodes, 1);
treeViewMS1.EndUpdate();
And inside a backgroundworker do work how i'm using it:
var root = Convert.ToString(e.Argument);
var dirNode = CreateDirectoryNode(root, "root", 1);
e.Result = dirNode;
And last the FTPListDetail class:
public class FTPListDetail
public bool IsDirectory
get
return !string.IsNullOrWhiteSpace(Dir) && Dir.ToLower().Equals("d");
internal string Dir { get; set; }
public string Permission { get; set; }
public string Filecode { get; set; }
public string Owner { get; set; }
public string Group { get; set; }
public string Name { get; set; }
public string FullPath { get; set; }
Now the main problem is that when i list the files and directories and display them in the treeView it dosen't get/display
the files in the root directory. Only in the sub nodes.
I will see the files inside hello and stats but i need also to see the files in the root directory.
1. How can i get and list/display the files of the root directory ?
2. For the test i tried to add to a List<string> the items in var files to see if i get the root files at all.
This is what i tried in the CreateDirectoryNode before it i added:
private List<string> testfiles = new List<string>();
Then after var files i did:
testfiles.Add(files.ToList()
But this is wrong. I just wanted to see in testfiles what items i'm getting in var files in the end of the process.
Both var files and directoryListing are IEnumerable<FTPListDetail> type.
The most important is to make the number 1 i mentioned and then to do number 2.

Risa no.
What i mean is this. This is a screenshot of my ftp server at my host(ipage.com).
Now this is a screenshot of my program and you can see that in my program i have only the directories hello stats test but i don't have the files in the root: htaccess.config swp txt 1.txt 2.png....all this files i don't have it on my treeView.
What i want it to be is that on my program on the treeView i will also display the files like in my ftp server.
I see in my program only the directories and the files in the directories but i don't see the files on the root directory/node.
I need it to be like in my ftp server i need to see in my program the htaccess 1.txt 2.png and so on.
So what i wrote in my main question is that in the var files i see this files of the root directory i just don't know to add and display them in my treeView(my treeView is treeViewMS1).
I know i checked in my program in the method CreateDirectoryNode i see in the first iteration of the recursive that var files contain this root files i just dont know how to add and display them in my treeView.
On the next iterations when it does the recursive it's adding the directories hello stats test and the files in this directories but i need it to first add the root files.

How do I read txt file and add items to dropdownlist or checkbox

I want to add items to a dropdown or check box by reading from a text file(and select one of them). (I donot use any table or database). The list of items is sometimes upto 20MB and hence cannot populate using session bean.I want items to be added to either checkbox or listbox during a button action. I have done this for textarea but unable so far to acheive for checkbox or listbox. I use following code which does not work:
public String button3_action() {
try{
FileReader fr = new FileReader "F:/CreatorProjects/checkboxtst.prs");
BufferedReader br = new BufferedReader(fr);
String s;
while((s=br.readLine())!=null) {
dropdown1.setValue(s);
br.close();
fr.close();
}catch(Exception e) {
e.printStackTrace();
return null;
I know I cant just transplant textarea code for dropdownlist or checkbox.
Any help is greatly appreciated.
Thanks.
Dr.AM.Mohan Rao

I am able to read from txt file to a listbox if i write in sessionsbean1:
try{
FileReader fr = new FileReader("F:/CreatorProjects/checkboxtst.prs");
BufferedReader br = new BufferedReader(fr);
String s1="";
String s="";
while((s=br.readLine())!=null) {
s1 = s1+s;
s1= s1+"\n";
disOptions = new com.sun.rave.web.ui.model.Option[] {
new Option(s1,s1)};
diseases = new String[] {};
fr.close();
br.close();
catch(Exception e) {
e.printStackTrace();
But I get all data in one line!! if I click submit button text area gets all. How to display items in each line????Please help...
Dr.AM. Mohan Rao

Error occurred in deployment step 'Add Solution': Failed to extract the cab file in the solution.

I have received the follwoing error when I depoly the custom masterpage with css, images, javascript files:
Error occurred in deployment step 'Add Solution': Failed to extract the cab file in the solution.
Any help will soon is appreciated.

Hi Bagalur,
Thanks for your sharing. It will help others who stuck will the same issue.
Best Regards
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jerry Guo
TechNet Community Support

DBA studio: Error add/connect database "Failed to parse tnsnames.ora file"

I have Oracle (version 8.1.7) installed in my XP machine and when I try to (having chosen "Launch DBA Studio standalone") to open a connection I get:
"Failed to parse tnsnames.ora file
ERROR: 100 -- NLNV-NLNV String Format Error".
Also got this when I tried to manually add a database to a tree.
I can access the databases listed in my tnsnames.ora using SQL Plus with no error.
This is my tnsnames.ora.
# TNSNAMES.ORA Network Configuration File: C:\oracle\ora81\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
INST1_HTTP.xx.yy.GE.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = MyMachine3)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = buch3ora)
(PRESENTATION = http://admin)
EXTPROC_CONNECTION_DATA.xx.yy.GE.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
MyOra3.xx.yy.GE.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = MyMachine3)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = ora3)
OORCL.xx.yy.GE.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 3.4.55.66)(PORT = 1521))
(CONNECT_DATA = (SERVICE_NAME = oorcl))
Does anybody have any idea what is wrong? Thanks a lot. Changsong

Just found out this IS a string error in my Tnsname.ora. What i did is deleting all the entries in my tnsname.ora, and start adding each one back. I found one particular entry is responsible for the error. This is the old text
serv32.xxx.ge.com =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (COMMUNITY = TCP)(PROTOCOL = TCP)(HOST = sevr32.xxy.ge.com)(PORT = 1521))
(CONNECT_DATA = (SID = atmo32))
just looking by itself I can't see anything wrong. I just formatted it a little, making it looked like the other one that is working
serv32.xxx.ge.com =(DESCRIPTION =
     (ADDRESS_LIST =
     (ADDRESS =
     (COMMUNITY = TCP)
     (PROTOCOL = TCP)
     (HOST = sevr32.xxy.ge.com)
     (PORT = 1521)))
     (CONNECT_DATA=
     (SID = atmo32)))
and now it works fine. I Really can't tell the difference, except that some words were moved to the other line. What puzzled me is that the same old tnsname.ora worked in almost all the other circumstances, like sql plus, and other database enginee. But it is just not good enough for dba studio?
I admit I probably should have used the network utility to add a connection to avoid this type of format error.
Anyhow, I'm glad it is solved. by the way, the symjct.dll mentioned in the previous post should be symcjit.dll. I guess he mispelled the name. I renamed it to symcjit_old.dll and now the java error was gone. So that is another gain from this post. Thanks Joel for all the information.

Good morning, I have the following problem. I can not start Adobe Muse on my computer because I get a box Assertion Failed in file "... \ src \ ape \ DOMFontProvider.cpp" at line 482: numFontadded = = 1 Doregisterfont fail to add font. Check museapp \ he

Good morning, I have the following problem. I can not start Adobe Muse on my computer because I get a box Assertion Failed in file "... \ src \ ape \ DOMFontProvider.cpp" at line 482: numFontadded = = 1
Doregisterfont fail to add font. Check museapp \ hello \ resources for missing files

Are you still facing the same issue ? if yes then please post the screenshot of exact error and few details such as if you are getting this error while opening a specific file or on double click on Muse itself ?
Thanks,
Sanjit

Failing to add audio track on mpeg file

Hi and thanks for all good answers the recent days. I'm a new and happy user of PRE8. I'm just about to finish an hour long movie. This is when a serious problem occurs in adding the last movie material to work with.
All thru the project I've added mpeg files without any problems. (Yes I have now started to import these files as AVI with a much better result (less stress on the process) as I have been told to do here). The way I have done this is to add the mpeg files, then saved them for personal computer as AVI and opened them in a new project, cutted them finished and opened them in the original main project file. This has worked well.
But the very last mpeg file I am going to add came into PRE project without it's audio track. The audio track exists. It plays in media player. But does not join the video track into PRE.
Is the only solution here to import the file from the camera-dvd?
Best regards, kjetil, norway

Use Windows Movie Maker or Prism outside of PE to first convert the suspect file to DV-AVI.
See the FAQ on where to get Prism, WMM should also be on your system, or can be found at www.microsoft.com:
http://forums.adobe.com/thread/415317?tstart=0
Once converted, test file outside PE and make sure it plays okay.
Then import the DV-AVI into PE.
This might get you to the promised land...

Windows 2008 Failover Cluster - Cannot add a generic service

Trying to add a generic service in a failover cluster.
Select the option Services and Application and it opens the wizard and then displays the error "An error was encountered while loading the list of services. QueryServiceConfig failed. The system cannot find the file specified"
The cluster validation wizard completes successfully. Permissions do not appear to be an issue as this account can seemly do everything else so I am at a loss to understand why this API is failing when it tries to query the server for services information.
Having searched the Internet the only thing I have found was someone posting a similar issue in the Greek language Technet forum(if I recall correctly) and their comment was they rebuild their cluster.
Windows 2008 (SP2) x64 two node cluster running a non-Microsoft database. We need to add a non-Microsoft Enterpirse backup solution and this is their documented method (adding it as a generic service) - both bits of software are from big vendors.
Symantec AV, but have tried with that disabled so don't think it has anything to do with that. Something is stopping the API from reporting back but I can't find what.
Really appreciate some help before we have to log a chargable call with Microsoft support
Thank you

Hi,
Have you tried the suggestion? I want to see if the information provided was helpful. Your feedback is
very useful for the further research. Please feel free to let me know if you have addition questions.
Best regards,
Vincent Hu

Failed to add item: Generic file I/O error

Similar Messages

Maybe you are looking for