Failed to execute SQL via TxDataSource/JDBCConnectionPool

I have an application running well on WLS doamin. After I deployed it to an EAI
domain, it does not work any more.
The WLI DB is an Oracle instance on the local box, and the application DB is an
Oracle instance running on a remote box. The JDBCConnectionPool and TxdataSource
are configured the same as that in the WLS domain. I can also run sqlplus using
the userID, password and Service Name I used to configur the connection pool.
However, when I test the application, it was rejected on the 1st SQL call. The
error message is below. It seems the application has initialized the EJB and DAO
object, but failed to execute SQL. The Exception is "Access not Allowed".
Any clue? Thanks in advance!
------------------------ Error msg -------------------
Home created
0 [ExecuteThread: '14' for queue: 'default'] INFO "EJB_FACTORY" - Set PDI Service
EJB Session Context
10 [ExecuteThread: '14' for queue: 'default'] INFO "EJB_FACTORY" - Created PDIService
EJBHome created
10 [ExecuteThread: '14' for queue: 'default'] INFO "EJB_FACTORY" - Located PDICase
EJB from ServiceLocator
10 [ExecuteThread: '14' for queue: 'default'] INFO "EJB_FACTORY" - Set PDICaseEJB
Session Context
10 [ExecuteThread: '14' for queue: 'default'] INFO "EJB_FACTORY" - Created PDICase
EJB
70 [ExecuteThread: '14' for queue: 'default'] INFO "EJB_FACTORY" - Created PDICase
DAO: PDIServiceDAO
80 [ExecuteThread: '14' for queue: 'default'] INFO usa.etm - Obtained connection
to jdbc/oracle/TxETMDataSource data source
80 [ExecuteThread: '14' for queue: 'default'] ERROR usa.etm - Failed to get PDIServiceDAO.select.pdi_seq
java.sql.SQLException: Cannot obtain connection after 3600 seconds. , Exception
= Access not allowed
at weblogic.jdbc.jts.Connection.wrapAndThrowSQLException(Connection.java:747)
at weblogic.jdbc.jts.Connection.getOrCreateConnection(Connection.java:669)
at weblogic.jdbc.jts.Connection.prepareStatement(Connection.java:184)
at weblogic.jdbc.rmi.internal.ConnectionImpl.prepareStatement(ConnectionImpl.java:139)
at weblogic.jdbc.rmi.SerialConnection.prepareStatement(SerialConnection.java:92)
at org.redcross.usa.bioarch.prototype.ejb.pdicase.PDIServiceDAOImpl.fetchSequence(PDIServiceDAOImpl.java:110)
at org.redcross.usa.bioarch.prototype.ejb.pdicase.PDIServiceDAOImpl.createPDICase(PDIServiceDAOImpl.java:86)
at org.redcross.usa.bioarch.prototype.ejb.pdicase.PDICaseBean.createPDICase(PDICaseBean.java:109)
at org.redcross.usa.bioarch.prototype.ejb.pdicase.PDICaseBean_19x9h_EOImpl.createPDICase(PDICaseBean_19x9h_EOImpl.java:208)
at org.redcross.usa.bioarch.prototype.ejb.pdiservice.PDIServiceBean.createPDICase(PDIServiceBean.java:116)
at org.redcross.usa.bioarch.prototype.ejb.pdiservice.PDIServiceBean_dtohls_EOImpl.createPDICase(PDIServiceBean_dtohls_EOImpl.java:262)
at org.redcross.usa.bioarch.prototype.ejb.pdiservice.PDIServiceBusinessDelegate.createPDICase(PDIServiceBusinessDelegate.java:67)
at org.redcross.usa.bioarch.prototype.webapp.PDICreateAction.perform(PDICreateAction.java:90)
at org.apache.struts.action.ActionServlet.processActionPerform(ActionServlet.java:1787)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1586)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:510)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:401)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:306)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:5445)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:780)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3105)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2588)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)140 [ExecuteThread:
'14' for queue: 'default'] ERROR "EJB_FACTORY" - Failed to complete session transaction
for PDI Case EJB

Similar Messages

Failed to execute sql statements

Hi all,
We have a cluster domain on a AIX 4.3 machine with jdk IBM 1.3. Sometimes we
get the following error at jdbc log files at one node. When we restart this node(
it is always the same) the problem stopped. Has anyone dealt with this problem
Version of BEA wls is 6.1 SP2.
SQLException: SQLState() vendor code(942)
java.sql.SQLException: ORA-00942: table or view does not exist
     at weblogic.jdbc.oci.Statement.private_parse(Statement.java(Compiled Code))
     at weblogic.jdbc.oci.Statement.private_parse(Statement.java(Compiled Code))
     at weblogic.jdbc.oci.xa.XAConnection.prepareStatement(XAConnection.java(Compiled
Code))
     at weblogic.jdbc.oci.xa.XAConnection.prepareStatement(XAConnection.java(Compiled
Code))
     at weblogic.jdbc.oci.xa.Connection.prepareStatement(Connection.java(Compiled
Code))
     at weblogic.jdbc.jta.XAConnection.prepareStatement(XAConnection.java(Compiled
Code))
     at weblogic.jdbc.jta.Connection.prepareStatement(Connection.java(Compiled Code))
     at weblogic.jdbc.rmi.internal.ConnectionImpl.prepareStatement(ConnectionImpl.java(Compiled
Code))
     at weblogic.jdbc.rmi.SerialConnection.prepareStatement(SerialConnection.java(Compiled
Code))
     at gr.cosmote.common.util.QueryLib.outletExists(QueryLib.java(Compiled Code))
     at gr.cosmote.common.session.BSRetrieverBean.outletExistsInBSCS(BSRetrieverBean.java:1289)
     at gr.cosmote.common.session.BSRetrieverBean_g4qybs_EOImpl.outletExistsInBSCS(BSRetrieverBean_g4qybs_EOImpl.java:1371)
     at gr.cosmote.common.session.BSRetrieverBean_g4qybs_EOImpl_WLSkel.invoke(Unknown
Source)
     at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java(Compiled Code))
     at weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java(Compiled
Code))
     at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java(Compiled
Code))
     at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java(Compiled
Code))
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java(Compiled Code))
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
Thanks Yiannis

Yiannis,
Is it possible for you to upgrade to the latest service pack for weblogic?
Regards,
Slava Imeshev
"Yiannis Mallios" <[email protected]> wrote in message news:[email protected]...
>
Hi all,
We have a cluster domain on a AIX 4.3 machine with jdk IBM 1.3. Sometimes we
get the following error at jdbc log files at one node. When we restart this node(
it is always the same) the problem stopped. Has anyone dealt with this problem
Version of BEA wls is 6.1 SP2.
SQLException: SQLState() vendor code(942)
java.sql.SQLException: ORA-00942: table or view does not exist
at weblogic.jdbc.oci.Statement.private_parse(Statement.java(Compiled Code))
at weblogic.jdbc.oci.Statement.private_parse(Statement.java(Compiled Code))
at weblogic.jdbc.oci.xa.XAConnection.prepareStatement(XAConnection.java(Compiled
Code))
at weblogic.jdbc.oci.xa.XAConnection.prepareStatement(XAConnection.java(Compiled
Code))
at weblogic.jdbc.oci.xa.Connection.prepareStatement(Connection.java(Compiled
Code))
at weblogic.jdbc.jta.XAConnection.prepareStatement(XAConnection.java(Compiled
Code))
at weblogic.jdbc.jta.Connection.prepareStatement(Connection.java(Compiled Code))
at weblogic.jdbc.rmi.internal.ConnectionImpl.prepareStatement(ConnectionImpl.java(Compiled
Code))
at weblogic.jdbc.rmi.SerialConnection.prepareStatement(SerialConnection.java(Compiled
Code))
at gr.cosmote.common.util.QueryLib.outletExists(QueryLib.java(Compiled Code))
at gr.cosmote.common.session.BSRetrieverBean.outletExistsInBSCS(BSRetrieverBean.java:1289)
at gr.cosmote.common.session.BSRetrieverBean_g4qybs_EOImpl.outletExistsInBSCS(BSRetrieverBean_g4qybs_EOImpl.java:1371)
at gr.cosmote.common.session.BSRetrieverBean_g4qybs_EOImpl_WLSkel.invoke(Unknown
Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java(Compiled Code))
at weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java(Compiled
Code))
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java(Compiled
Code))
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java(Compiled
Code))
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java(Compiled Code))
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
Thanks Yiannis

Maintenance Cleanup Task fails when executed with SQL Agent but dont if executed manually

Hello,
I have a job that fails with the following error if exectued via the SQL Server Agent but not if executed manually.
The error is:
Error: 2014-03-31 21:30:14.89 Code: 0xC002F210 Source: Maintenance Cleanup Task Execute SQL Task Description: Executing the query "EXECUTE master.dbo.xp_delete_file 0,N'\\erpfiles\b..."
failed with the following error: "xp_delete_file() returned error 2, 'The system cannot find the file specified.'". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly,
or connection not established correctly. End Error
I have checked and the user configured to run the SQL Agent has all needed accesses to the folder \\erpfiles\b....
Have you an idea to help me go further in my troubleshooting ? Or have you an idea to solve my problem ?
Thanks in advance

I think reason for this is the service account having no permissions on the specified folder path. Thats when you get this error most of the times. The user logged in might have access but please keep in mind that sql agent job makes use of service account
to execute the job which would still need access to the pat to delete the files
What you can do is add a proxy account and give it access to folder path and use it to execute the job
http://www.databasejournal.com/features/mssql/article.php/3789881/Proxy-Accounts-in-SQL-Server.htm
Alternatively you can give the service account access to the folder path.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

[Execute SQL Task] Error: Executing the query failed with error: "The COMMIT TRANSACTION request has no corresponding BEGIN TRANSACTION."

I have an package with source , data flow and destination to execute on begin and commit.
in the below i have just used for questioning purpose with diagram removing my Data Flow task explaining my problem
on execution, i get error as
[Execute SQL Task] Error: Executing the query "COMMIT TRAN DimCompanyCode" failed with the following error: "The COMMIT TRANSACTION request has no corresponding BEGIN TRANSACTION.". Possible failure reasons: Problems with the query, "ResultSet"
property not set correctly, parameters not set correctly, or connection not established correctly.
as mentioned , i have checked the ResultSet, parameters , connection establish.. all are fine.
Kindly advice on what has to be done.
ShanmugaRaj

To avoid this error, the RetainSameConnection property should set to 'True' for the Connection Manager - Application_DB.
Narsimha

Execute SQL Task Failing

Hi there,
I have this issue with my Execute SQL Task Failing. I am trying to execute a sp using an execute sql task. The execute statement is contained in a variable (exec [sp_name] par1, par2) that I have declared at the package level. Now inside the exec sql
tak, I am calling this variable. Now when I try to execute this task, it fails and I get the following:
[Execute SQL Task] Error: Executing the query "EXEC CTL_ISRT_A 55,1" failed with the following error: "Could not find stored procedure 'CTL_ISRT_A'.". Possible failure reasons: Problems with the query, "ResultSet" property not
set correctly, parameters not set correctly, or connection not established correctly.
There is a stored procedure called "CTL_ISRT_A" in the db and I am able to execute it from SQL Server. This sp is inserting a new row in the table and it returns @@IDENTITY.
I tried setting the result set to a 'Single Row' and tried assigning the value to a variable but it didnt help. Could someone help me here?
Thanks in advance

return it as an output parameter
ie make sp like below
ALTER PROCEDURE [devdba].[M_CTL_ISRT]
@F_ID INT
, @PR_IND BIT
, @Debug bit = 0
, @IDVal int = 0 OUTPUT
AS
BEGIN
SET NOCOUNT ON
DECLARE @ErrorMsg varchar(5000)
DECLARE @USR_ID AS INT = 1;
INSERT INTO TBL_D (F_ID, PR_IND, USR_ID,CRE_DT, LAST_MODD_USR_ID, LAST_MODD_DT)
VALUES (@F_ID, @PR_IND, @USR_ID, GETDATE(), @USR_ID, GETDATE())
SELECT @IDVal= @@IDENTITY
END
Then in execute sql task call it as
EXEC devdba].[M_CTL_ISRT] ?,?,0,? OUT
then in parameter tab pass required variables and for last parameter make direction as Output and you'll get identify value stored in it.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Execute SQL Task fails when specific column names are mentioned in Excel Query

Hi,
I have a requirement for extracting Excel data with thespecific column order. So instead of using the below query,
Select * From [Sheet1$A1:ZZ1]
I use the below one,
Select col1,
col2,
col91
From [CRM$A1:ZZ1]
So I have totally 91 columns.
I don't face any issues when i use the before query. i.e. direct select * from sheet1
But when i specify column names and do a select from the sheet it throws error as below,
[Execute SQL Task] Error: Executing the query "Select
[Col1]
From [Sheet1$..." failed with the following error: "No value given for one or more required parameters.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not
set correctly, or connection not established correctly.
I just need to retrieve the column name alone and not any of the values to it. So when i do simple select * it gives the column names in the order of what it is been with the excel. But i do want it to be sorted in alphabetically and to retrieve the column
names.
I am not getting any proper solution for this for past 1 and a half days. May anyone of you please help me get it sorted? - Thank you!
--------------------------- Radhai Krish | Golden Age is no more far | --------------------------

Please use something like below:
SELECT F1 AS Col1, F2 AS Col2, F3 AS Col3, ...
FROM [Sheet1$A1:ZZ1]
Cheers,
Vaibhav Chaudhari
[MCTS],
[MCP]

SSIS custom execute sql task : Failed with error

I am developing a custom SSIS task for running sql task. But it fails with error - I'm trying to set the resultsetbinding to be used by next task in workflow.
Error: 0xC0014054 at CustomSSISTask: Failed to lock variable "User::id" for read access with error 0xC0010001 "The variable cannot be found. This occurs when an attempt is made to retrieve a variable from the Variables collection on a container
during execution of the package, and the variable is not there. The variable name may have changed or the variable is not being created.".
Error: 0xC002F210 at CustomSSISTask, Execute SQL Task: Executing the query "SELECT id FROM sysobjects WHERE name = 'sysrowsets..." failed with the following error: "Failed to lock variable "User::id" for read access with error 0xC0010001
"The variable cannot be found. This occurs when an attempt is made to retrieve a variable from the Variables collection on a container during execution of the package, and the variable is not there. The variable name may have changed or the variable is
not being created.".
". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Warning: 0x80019002 at CustomSSISTask: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches
the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Task failed: CustomSSISTask
Here is the code sample I'm trying ,
public override DTSExecResult Execute(Connections connections, VariableDispenser variableDispenser,
IDTSComponentEvents componentEvents, IDTSLogging log, object transaction)
MessageBox.Show("testing:");
try
// Add the SQL Task
Package package = new Package();
package.Executables.Add("STOCK:SQLTask");
Microsoft.SqlServer.Dts.Runtime.Variable variable = package.Variables.Add("id", false, "User", 0);
// Get the task host wrapper
TaskHost taskHost = package.Executables[0] as TaskHost;
// Get the task object
ExecuteSQLTask task = taskHost.InnerObject as ExecuteSQLTask;
// Set core properties
task.Connection = connections[0].Name;
task.SqlStatementSource = "SELECT id FROM sysobjects WHERE name = 'sysrowsets'";
//task.SqlStatementSource =
// "SELECT PersonID from [AmalgaSpeedTableData].[SpeedTable].[DimPerson] where PersonIntID = '1'";
task.SqlStatementSourceType = SqlStatementSourceType.DirectInput;
// Add result set binding, map the id column to variable
IDTSResultBinding resultBinding = task.ResultSetBindings.Add();
//IDTSResultBinding resultBinding = task.ResultSetBindings.GetBinding(0);
resultBinding.ResultName = "variable";
resultBinding.DtsVariableName = variable.QualifiedName; //"User::id";
task.Execute(connections, variableDispenser, componentEvents, log, transaction);
catch (Exception ex)
throw new ArgumentException(ex.Message);
return DTSExecResult.Success;
It doesnt throw any exception but custom task fails.
Later I will be also using parametersetbindings to pass some input parameters to this task , since I'm stuck for out param - blocked moving ahead.
Any help would be greatly appreciated.
Thanks
Sang

Hi, could you check whether the following threads help:
http://stackoverflow.com/questions/5787621/ssis-package-failed-to-locak-variable-for-read-access-with-error-0xc0010001
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/40ee7eff-5ec1-426f-a1a8-ab85b40b51aa/error-variable-can-not-be-found-while-executing-package-from-the-net-code?forum=sqlintegrationservices
Regards, Leo

[Execute SQL Task] Error: Executing the query "DECLARE_@XMLA nvarchar(3000) ,__@DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly,

Hi
DECLARE @XMLA nvarchar(3000)
, @DateSerial nvarchar(35);
-- Change date to format YYYYMMDDHHMMSS
SET @DateSerial = CAST(GETDATE() AS DATE);
--SELECT @DateSerial
Set @XMLA =
N' <Batch xmlns="http://schemas.microsoft.com/analysis services/2003/engine">
<ErrorConfiguration xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2"
xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2" xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200"
xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200">
<KeyErrorLimit>-1</KeyErrorLimit>
<KeyNotFound>IgnoreError</KeyNotFound>
<NullKeyNotAllowed>IgnoreError</NullKeyNotAllowed>
</ErrorConfiguration>
<Parallel>
<Process xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2" xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2"
xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200" xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200"
xmlns:ddl300="http://schemas.microsoft.com/analysisservices/2011/engine/300" xmlns:ddl300_300="http://schemas.microsoft.com/analysisservices/2011/engine/300/300">
<Object>
<DatabaseID>MultidimensionalProject5</DatabaseID>
<CubeID>giri</CubeID>
<MeasureGroupID>Fact Internet Sales</MeasureGroupID>
</Object>
<Type>ProcessFull</Type>
<WriteBackTableCreation>UseExisting</WriteBackTableCreation>
</Process>
</Parallel>
</Batch>';
EXEC (@XMLA) At SHALL-PCAdventureWorksDw ;
iam executive the query when iam getting below error.
[Execute SQL Task] Error: Executing the query "DECLARE
@XMLA nvarchar(3000)
, @DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set
correctly, or connection not established correctly.
how to solve this error;
please help me

What are you trying to do? What sort of data source is SHALL-PCAdventureWorksDw?
When you use EXEC() AT, I would execpt to see an SQL string to be passed to EXEC(), but you are passing an XML string????
If you explain why you think this would work in the first place, maybe we can help you.
Erland Sommarskog, SQL Server MVP, [email protected]

Execute SQL Tasks Failing for Duplicate Syntax Between DEV and Production DB

Newbie here...be patient with me!
I added tasks to refresh two tables (delete from, insert into, update) to an SSIS project . I have them running from the WinXP scheduler. The issue:
In dev the tasks integrate and execute successfully from scheduler
In prod I can right click and execute each of the three tasks without any problem, but the same tasks cause my project to fail when executed from scheduler
Questions:
Any ideas about what I am failing to see?
How do I get a meaningful log messages from the tasks that are failing?
Thanks for your ideas...
Installed Edition: IDE Standard
SQL Server Analysis Services
Microsoft SQL Server Analysis Services Designer
Version 9.00.1399.00
SQL Server Integration Services
Microsoft SQL Server Integration Services Designer
Version 9.00.1399.00
SQL Server Reporting Services
Microsoft SQL Server Reporting Services Designers
Version 9.00.1399.00
Microsoft Visual Studio 2005
Version 8.0.50727.42 (RTM.050727-4200)
Microsoft .NET Framework
Version 2.0.50727
Installed Edition: IDE Standard
SQL Server Analysis Services
Microsoft SQL Server Analysis Services Designer
Version 9.00.1399.00
SQL Server Integration Services
Microsoft SQL Server Integration Services Designer
Version 9.00.1399.00
SQL Server Reporting Services
Microsoft SQL Server Reporting Services Designers
Version 9.00.1399.00

Newbie here...be patient with me!
I added tasks to refresh two tables (delete from, insert into, update) to an SSIS project . I have them running from the WinXP scheduler. The issue:
In dev the tasks integrate and execute successfully from scheduler
In prod I can right click and execute each of the three tasks without any problem, but the same tasks cause my project to fail when executed from scheduler
Questions:
Any ideas about what I am failing to see?
How do I get a meaningful log messages from the tasks that are failing?
If i understand correctly you are trying to run SSIS package from Window XP task scheduler. The reason for the failure may be due to permission while accessing resources required in the package. However it is difficult to suggest without
looking at the error message.
Scheduled tasks maintains a log file (Schedlgu.txt), in the c:\Windows folder. You can view the log from the Scheduled Tasks window by clicking
View Log on the Advanced menu.
The log file size is 32 kilobytes (KB), and when the file reaches its maximum size, it automatically starts to record new information at the beginning of the log file and writes over the old log file information.
Refer http://support.microsoft.com/kb/308558
http://msdn.microsoft.com/en-us/library/windows/desktop/aa383604(v=vs.85).aspx
Regards, RSingh

Execute SQL Task Editor: The query failed to parse. Syntax error, permission violation, or other nonspecific error.

Environment: SQL Server 2008 R2
Code:
CREATE TABLE dbo.PkgAudit
PkgAuditID INT IDENTITY(1, 1),
PackageName VARCHAR(100),
LoadTime DATETIME ,
NumberofRecords VARCHAR(50),
Status1 VARCHAR(50),
Status2 VARCHAR(50),
The following code is inserted in the SQL Task Execute Editor
INSERT INTO dbo.PkgAudit(PackageName
,LoadTime
,NumberofRecords
,Status1
,Status2
) VALUES(?,?,?,?,?)
Screen Shot (Parameter Mapping):
Problem: an error Message occurred when I hit Parse Query Button in the Execute SQL Task Editor, "Execute SQL: Task Editor: The query failed to parse. Syntax error, permission violation, or other nonspecific error". How I could Solve this
problem

Different connection providers require different Parameter syntax. E.g. ADO @ParameterName notatoin, not just an offset of 0,1 etc.
Arthur My Blog

Failed to create an IDataAdapter object. This provider may not be fully supported with the Execute SQL Task

I executed a simple query inside an execute SQL task -
SELECT col1, col2
from thetable
where code = ?
order by id asc
Exec sql task - ADO.NET connection
parameter "code" is an int32 in SSIS and int32 in parameter mapping of exec sql task.
It works fine in SQL server, but in SSIS it causes the error -
[Execute SQL Task] Error: Executing the query "SELECT col1, col2
from thet..." failed with the following error: "Failed to create an IDataAdapter object. This provider may not be fully supported with the Execute SQL Task. Error message 'Incorrect syntax near '?'.'.". Possible failure reasons: Problems with
the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
How do I fix this error ?

Thanks. I think it was sqlclient. I changed it to OLEDB to avoid that issue. Btw, what is this "provider" ?
Hi blastoSO,
To check which provider is used by the current ADO.NET Connection Manager, you can open the “Configure ADO.NET Connection Manager” window, and check the “Managed Provider” option of each Data connection.
In an Execute SQL Task, if the managed provider is “System.Data.SqlClient”, we should use the rule for the ADO.NET connection type in the following table. If the managed provider is “System.Data.Oledb” or “System.Data.Odbc”, it actually uses the OLE DB provider
or ODBC provider, so we should use the rule for the OLE DB or OBC rule in the following table:
Reference:
http://technet.microsoft.com/en-us/library/cc280502.aspx
Regards,
Mike Yin
TechNet Community Support

Export scheduler job but chain step and chain rule failed with ORA-24150 ORA-06512 during executed sql script.

Hi Folks,
I used expdp utility to export all Oracle scheduler jobs and chains with below method, after that generate sql script by impdp, later on executing sql script encountered some errors.
Only chain step and chain rule for executing script. Does anyone bright me some light? Thanks!
My env: Oracle 11g + Oracle Linux 5.5
My steps as below:
1. export(expdp) oracle scheduler job(chain)
2. generate sql script by impdp.
3. remove orginal scheduler job(chain)
4. execute sql script
5. job with no chain well but job with chain failed
[oracle@linux1 ~]$ expdp scott/tiger directory=db_dump_dir dumpfile=scott_job.dmp include=procobj:\" in $select \
> name from sys.obj$ where type\# in \(46,59,66,67,68,69,72,74,79$\)\" schemas=scott
Export: Release 11.2.0.1.0 - Production on Tue Dec 3 17:42:31 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, Real Application Clusters, OLAP, Data Mining
and Real Application Testing options
Starting "SCOTT"."SYS_EXPORT_SCHEMA_01": scott/******** directory=db_dump_dir dumpfile=scott_job.dmp include=procobj:" in (select name from sys.obj$ where type# in (46,59,66,67,68,69,72,74,79))" schemas=scott
Estimate in progress using BLOCKS method...
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 0 KB
Processing object type SCHEMA_EXPORT/POST_SCHEMA/PROCOBJ
Master table "SCOTT"."SYS_EXPORT_SCHEMA_01" successfully loaded/unloaded
Dump file set for SCOTT.SYS_EXPORT_SCHEMA_01 is:
/u03/database/usbo/BNR/dump/scott_job.dmp
Job "SCOTT"."SYS_EXPORT_SCHEMA_01" successfully completed at 17:42:54
[oracle@linux1 ~]$ impdp scott/tiger sqlfile=scott_job.sql directory=db_dump_dir dumpfile=scott_job.dmp logfile=imp_scott_job.log
Import: Release 11.2.0.1.0 - Production on Tue Dec 3 17:43:04 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, Real Application Clusters, OLAP, Data Mining
and Real Application Testing options
Master table "SCOTT"."SYS_SQL_FILE_FULL_01" successfully loaded/unloaded
Starting "SCOTT"."SYS_SQL_FILE_FULL_01": scott/******** sqlfile=scott_job.sql directory=db_dump_dir dumpfile=scott_job.dmp logfile=imp_scott_job.log
Processing object type SCHEMA_EXPORT/POST_SCHEMA/PROCOBJ
Job "SCOTT"."SYS_SQL_FILE_FULL_01" successfully completed at 17:43:07
[oracle@linux1 ~]$ more /u03/database/usbo/BNR/dump/scott_job.
scott_job.dmp scott_job.sql
[oracle@linux1 ~]$ more /u03/database/usbo/BNR/dump/scott_job.sql
-- CONNECT SCOTT
ALTER SESSION SET EVENTS '10150 TRACE NAME CONTEXT FOREVER, LEVEL 1';
ALTER SESSION SET EVENTS '10904 TRACE NAME CONTEXT FOREVER, LEVEL 1';
ALTER SESSION SET EVENTS '25475 TRACE NAME CONTEXT FOREVER, LEVEL 1';
ALTER SESSION SET EVENTS '10407 TRACE NAME CONTEXT FOREVER, LEVEL 1';
ALTER SESSION SET EVENTS '10851 TRACE NAME CONTEXT FOREVER, LEVEL 1';
ALTER SESSION SET EVENTS '22830 TRACE NAME CONTEXT FOREVER, LEVEL 192 ';
-- new object type path: SCHEMA_EXPORT/POST_SCHEMA/PROCOBJ
BEGIN
BEGIN
dbms_rule_imp_obj.import_rule('"SCOTT"','"CHAIN_RULE_1"','1=1',NULL, 'First link in the chain.',0,NULL);
END;
COMMIT;
END;
BEGIN
BEGIN
dbms_rule_imp_obj.import_rule('"SCOTT"','"CHAIN_RULE_2"',':"CHAIN_STEP_1".COMPLETED = ''TRUE''',NULL, 'Second link in the chain.',0,NULL);
END;
COMMIT;
END;
BEGIN
BEGIN
dbms_rule_imp_obj.import_rule('"SCOTT"','"CHAIN_RULE_3"',':"CHAIN_STEP_2".COMPLETED = ''TRUE''',NULL, 'Third link in the chain.',0,NULL);
END;
COMMIT;
END;
BEGIN
BEGIN
dbms_rule_imp_obj.import_rule('"SCOTT"','"CHAIN_RULE_4"',':"CHAIN_STEP_3".COMPLETED = ''TRUE''',NULL, 'End of the chain.',0,NULL);
END;
COMMIT;
END;
BEGIN
BEGIN
dbms_rule_imp_obj.import_rule_set('"SCHED_RULESET$1"','"SCHED_EV_CTX$1"',NULL, 0);
END;
COMMIT;
END;
BEGIN
dbms_scheduler.create_program('"TEST_PROC_1"','PLSQL_BLOCK',
'BEGIN
                         INSERT INTO tb_schduler (id, descr, cr_date)
                         VALUES (tb_schduler_seq.NEXTVAL, ''test_proc_1'', SYSDATE);
                         COMMIT;
                       END;'
,0, TRUE,
'Program for first link in the chain.'
COMMIT;
END;
BEGIN
dbms_scheduler.create_program('"TEST_PROC_3"','PLSQL_BLOCK',
'BEGIN
                         INSERT INTO tb_schduler (id, descr, cr_date)
                         VALUES (tb_schduler_seq.NEXTVAL, ''test_proc_3'', SYSDATE);
                         COMMIT;
                       END;'
,0, TRUE,
'Program for last link in the chain.'
COMMIT;
END;
BEGIN
dbms_scheduler.create_program('"TEST_PROC_2"','PLSQL_BLOCK',
'BEGIN
                         INSERT INTO tb_schduler (id, descr, cr_date)
                         VALUES (tb_schduler_seq.NEXTVAL, ''test_proc_2'', SYSDATE);
                         COMMIT;
                       END;'
,0, TRUE,
'Program for second link in the chain.'
COMMIT;
END;
BEGIN
dbms_scheduler.create_chain('"TEST_CHAIN_1"', evaluation_interval=>NULL, comments=>'A test chain.'
, rule_set_name=>'"SCHED_RULESET$1"   '
dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_1"', program_name=>'"TEST_PROC_1"');
dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_2"', program_name=>'"TEST_PROC_2"');
dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_3"', program_name=>'"TEST_PROC_3"');
COMMIT;
END;
BEGIN
dbms_scheduler.create_job('"TEST_CHAIN_1_JOB"',
job_type=>'CHAIN', job_action=>
'test_chain_1'
, number_of_arguments=>0,
start_date=>TO_TIMESTAMP_TZ('03-DEC-2013 05.38.56.718161000 PM +08:00','DD-MON-RRRR HH.MI.SSXFF AM TZR','NLS_DATE_LANGUAGE=english'), repeat_interval=>
'freq=minutely; interval=2'
, end_date=>TO_TIMESTAMP_TZ('03-DEC-2013 06.08.56.000000000 PM +08:00','DD-MON-RRRR HH.MI.SSXFF AM TZR','NLS_DATE_LANGUAGE=english'),
job_class=>'"DEFAULT_JOB_CLASS"', enabled=>FALSE, auto_drop=>TRUE,comments=>
NULL
COMMIT;
END;
[oracle@linux1 ~]$ export ORACLE_SID=usbo
[oracle@linux1 ~]$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Tue Dec 3 17:44:43 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, Real Application Clusters, OLAP, Data Mining
and Real Application Testing options
sys@USBO> show parameter db_name
NAME                                 TYPE                              VALUE
db_name                              string                            usbo
sys@USBO> conn scott/tiger;
Connected.
--remove job and chain.
scott@USBO> EXEC DBMS_SCHEDULER.drop_job(job_name => 'test_chain_1_job');
EXEC DBMS_SCHEDULER.drop_chain (chain_name => 'test_chain_1');
EXEC DBMS_SCHEDULER.drop_program (program_name => 'test_proc_1');
EXEC DBMS_SCHEDULER.drop_program (program_name => 'test_proc_2');
EXEC DBMS_SCHEDULER.drop_program (program_name => 'test_proc_3');
PL/SQL procedure successfully completed.
scott@USBO> @/u03/database/usbo/BNR/dump/scott_job.sql
Session altered.
Session altered.
Session altered.
Session altered.
Session altered.
Session altered.
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
BEGIN
ERROR at line 1:
ORA-24150: evaluation context SCOTT.SCHED_EV_CTX$1 does not exist
ORA-06512: at "SYS.DBMS_RULEADM_INTERNAL", line 28
ORA-06512: at "SYS.DBMS_RULE_IMP_OBJ", line 40
ORA-06512: at line 3
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
BEGIN
ERROR at line 1:
ORA-24141: rule set SCOTT.SCHED_RULESET$1 does not exist
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.DBMS_ISCHED", line 1694
ORA-01403: no data found
ORA-06512: at "SYS.DBMS_SCHEDULER", line 1638
ORA-06512: at line 5
PL/SQL procedure successfully completed.

Thanks all of you!
Hi DK2010,
I took some test that the data dict(dba_rule_sets/dba_evaluation_contexts) no any data returned after I had removed the job.
So I tried to create evaluation context and re-executed script(only exception setion.) the first error has gone. For the second still have some issue.
---->no any returned
scott@USBO> select * from dba_rule_sets where rule_set_owner='SCOTT';
no rows selected
scott@USBO> select * from dba_evaluation_contexts WHERE evaluation_context_owner='SCOTT';
no rows selected
-->add new EVALUATION CONTEXT
scott@USBO> exec DBMS_RULE_ADM.CREATE_EVALUATION_CONTEXT('SCOTT.SCHED_EV_CTX$1');
PL/SQL procedure successfully completed.
--->now it looks fine
scott@USBO> BEGIN
2 BEGIN
3 dbms_rule_imp_obj.import_rule_set('"SCHED_RULESET$1"','"SCHED_EV_CTX$1"',NULL, 0);
4 END;
5
6 COMMIT;
7 END;
8 /
PL/SQL procedure successfully completed.
--->add new rule set, it prompt aleady exists
scott@USBO> exec DBMS_RULE_ADM.CREATE_RULE_SET('SCOTT.SCHED_RULESET$1')
BEGIN DBMS_RULE_ADM.CREATE_RULE_SET('SCOTT.SCHED_RULESET$1'); END;
ERROR at line 1:
ORA-24153: rule set SCOTT.SCHED_RULESET$1 already exists
ORA-06512: at "SYS.DBMS_RULEADM_INTERNAL", line 28
ORA-06512: at "SYS.DBMS_RULE_ADM", line 138
ORA-06512: at line 1
-->chain rule still could not find.
scott@USBO> @job_chain_rules.sql
no rows selected
-->rerun
scott@USBO> BEGIN
2 dbms_scheduler.create_chain('"TEST_CHAIN_1"', evaluation_interval=>NULL, comments=>'A test chain.'
3 , rule_set_name=>'"SCHED_RULESET$1"   '
4 );
5 dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_1"', program_name=>'"TEST_PROC_1"');
6 dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_2"', program_name=>'"TEST_PROC_2"');
7 dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_3"', program_name=>'"TEST_PROC_3"');
8 COMMIT;
9 END;
10 /
BEGIN
ERROR at line 1:
ORA-27477: "SCOTT.TEST_CHAIN_1" already exists
ORA-06512: at "SYS.DBMS_ISCHED", line 1148
ORA-06512: at "SYS.DBMS_SCHEDULER", line 1598
ORA-06512: at line 2
-->drop chain
scott@USBO> exec dbms_scheduler.drop_chain('TEST_CHAIN_1');
BEGIN dbms_scheduler.drop_chain('TEST_CHAIN_1'); END;
ERROR at line 1:
ORA-27479: Cannot drop "SCOTT.TEST_CHAIN_1" because other objects depend on it
ORA-06512: at "SYS.DBMS_ISCHED", line 1319
ORA-06512: at "SYS.DBMS_ISCHED", line 1222
ORA-06512: at "SYS.DBMS_SCHEDULER", line 1854
ORA-06512: at line 1
scott@USBO> exec dbms_scheduler.drop_chain('TEST_CHAIN_1',force=>TRUE);
PL/SQL procedure successfully completed.
scott@USBO> BEGIN
2 dbms_scheduler.create_chain('"TEST_CHAIN_1"', evaluation_interval=>NULL, comments=>'A test chain.'
3 , rule_set_name=>'"SCHED_RULESET$1"   '
4 );
5 dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_1"', program_name=>'"TEST_PROC_1"');
6 dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_2"', program_name=>'"TEST_PROC_2"');
7 dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_3"', program_name=>'"TEST_PROC_3"');
8 COMMIT;
9 END;
10 /
BEGIN
ERROR at line 1:
ORA-24141: rule set SCOTT.SCHED_RULESET$1 does not exist   --->still returned no rule set
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.DBMS_ISCHED", line 1694
ORA-01403: no data found
ORA-06512: at "SYS.DBMS_SCHEDULER", line 1638
ORA-06512: at line 5
scott@USBO> exec DBMS_RULE_ADM.CREATE_RULE_SET('SCOTT.SCHED_RULESET$1')
PL/SQL procedure successfully completed.
scott@USBO> BEGIN
2 dbms_scheduler.create_chain('"TEST_CHAIN_1"', evaluation_interval=>NULL, comments=>'A test chain.'
3 , rule_set_name=>'"SCHED_RULESET$1"   '
4 );
5 dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_1"', program_name=>'"TEST_PROC_1"');
6 dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_2"', program_name=>'"TEST_PROC_2"');
7 dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_3"', program_name=>'"TEST_PROC_3"');
8 COMMIT;
9 END;
10 /
BEGIN
ERROR at line 1:
ORA-27477: "SCOTT.TEST_CHAIN_1" already exists
ORA-06512: at "SYS.DBMS_ISCHED", line 1148
ORA-06512: at "SYS.DBMS_SCHEDULER", line 1598
ORA-06512: at line 2
scott@USBO> exec dbms_scheduler.drop_chain('TEST_CHAIN_1',force=>TRUE);
PL/SQL procedure successfully completed.
scott@USBO> BEGIN
2 dbms_scheduler.create_chain('"TEST_CHAIN_1"', evaluation_interval=>NULL, comments=>'A test chain.'
3 , rule_set_name=>'"SCHED_RULESET$1"   '
4 );
5 dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_1"', program_name=>'"TEST_PROC_1"');
6 dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_2"', program_name=>'"TEST_PROC_2"');
7 dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_3"', program_name=>'"TEST_PROC_3"');
8 COMMIT;
9 END;
10 /
BEGIN
ERROR at line 1:
ORA-24141: rule set SCOTT.SCHED_RULESET$1 does not exist
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.DBMS_ISCHED", line 1694
ORA-01403: no data found
ORA-06512: at "SYS.DBMS_SCHEDULER", line 1638
ORA-06512: at line 5
Would you like to give me more clue?
Thanks again.

MDM Database command execution error. A SQL statement failed to execute

Hi,
When we tried to execute an MDM Java query modify/create, we get the following dump.
Is this anything to do with the parameters that we pass or is it something to do with the database ?
We have checked the code and we do not find anything wrong with the code at all.
We are using Java API 5.5.63.73 and calling MDM API's using WebDynpro for Java.
I have noticed this issue has been raised here as well :
Database command execution error. (While mounting a repository)
com.sap.mdm.commands.CommandException:
com.sap.mdm.internal.protocol.manual.ServerException: Database command execution error. A SQL
statement failed to execute. The actual error may have been written to a log file. at
com.sap.mdm.data.commands.ModifyRecordCommand.execute(ModifyRecordCommand.java:163) at
Regards,
Subramanian V.
Edited by: Subramanian Venkateswaran on Dec 10, 2008 8:11 PM

Hi Subramanian ,
The error looks more like a problem with the data base or MDM system rather than the java code.
Which is the underlying database you are using with MDM? As some users have faced some difficulties when working with the DB2 Data base,If this is the data base you too are working upon then may be the issue could be similar,if possible try using the Oracle or SQL data base as these databse show more compatibility than a DB2 when working with MDM .
Also check the MDM users autorization and authentication to modifyor create recordrs in MDM.try given the user the ADMIN rights,and tehn try and see if teh user is able to modify/Create the mdm records.
Lastly you can check the database instance and listener configuration correctly.try restarting the Database service form the system if possible.
Hope It Helped
Thanks & Regards
Simona Pinto

SSIS Package Load Failure and is missing Execute SQL Task in Toolbox

Also, BIDS closes after right-clicking the toolbox and selecting “Choose Items”.
I’ve tried several ways to fix these issues with no success.
I’m running SSIS/SSMS/SQL Server 2008 R2 (but not running an SQL instance on my PC) on a Windows XP with Service Pack 3 workstation. I get the following errors:
WHEN OPENING BIDS:
I get 2 errors titled “Package Load Failure”. They both reference ‘Visual Studio Explorers and Designers Package’ as being what failed to load. The first message references GUID 8D8529D3-625D-4496-8354-3DAD630ECC1B. The second references GUID AA612177-A69A-4391-B2F4-17F8A88F4BBA
. They both mention contacting the package vendor, but I haven’t got any Add-ins loaded so I’m not sure what that means exactly. They also both ask if I’d like to skip loading the package in the future.
ONCE BIDS IS OPEN:
No error messages appear here. There is no ‘Execute SQL Task’ in the toolbox for Control Flows. Also, if I attempt to open a project containing this object (Execute SQL Task), I get this error in a modal window:
TITLE: Microsoft Visual Studio
There were errors while the package was being loaded.
The package might be corrupted.
See the Error List for details.
BUTTONS:
OK
. . . and these errors in the Error List at the bottom of the IDE:
Error      1
Error loading Package.dtsx: Failed to load task "Execute SQL Task", type "Microsoft.SqlServer.Dts.Tasks.ExecuteSQLTask.ExecuteSQLTask, Microsoft.SqlServer.SQLTask, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91". The contact information
for this task is "Execute SQL Task; Microsoft Corporation; Microsoft SQL Server 2008 R2; © 2007 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1".
        C:\Documents and Settings\848862.VCHS_NT_DOMAIN\My Documents\Visual Studio 2008\Projects\LearnSSIS\LearnSSIS\Package.dtsx
1
1
Error      2
Validation error. Execute SQL Task : The task has failed to load. The contact information for this task is "Execute SQL Task; Microsoft Corporation; Microsoft SQL Server 2008 R2; © 2007 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1".
        Package.dtsx
0
0
Error      3
Validation error. Execute SQL Task : There were errors during task validation.
   Package.dtsx
0
0
Finally, when I attempt to add the Execute SQL Task via the Tools menu, “Choose Toolbox Items” selection, I do get the tabbed box for adding things. However, they only come up after issuing this error:
The following assemblies are installed SDK assemblies but could not be shown in the customize toolbox dialog because they are missing one or more components. Please make sure that all necessary libraries are available:
Microsoft.SqlServer.SqlCEDest.dll
Microsoft.SqlServer.Management.CollectorTasks.dll
Microsoft.SqlServer.SQLTask.dll
System.Data.SqlServerCe.dll
Microsoft.Synchronization.Data.SqlServerCe.dll
(above dll repeated at bottom of message)
After this message, I have my choice of .NET Framework Compnents. When I select COM Components, those come up with no problem. The WPF Components tab generates the same dll error above. The Maintenance tab is empty. The SSIS Data Flow Items tab loads fine,
as does the SSIS Control Flow Items tab – but there’s no Execute SQL Task there either.
If you open the toolbox (on a new project, with a project loaded, or without a project loaded) and right-click, then select “Choose Items”, the entire application quickly closes. This “closing behavior” is the same thing you get if you attempt to add toolbox
items through either the Tools menu or the right-click method when you launch BIDS in SafeMode.
In an effort to fix this – I’ve rolled back the .NET Framework version to 3.0 and reinstalled back up to 4; I’ve uninstalled and reinstalled SQL Server 2008 R2 shared services as well as the entire application; I’ve cleared the .tbd files from my user profile;
and I’ve run several things from the command line (devenv.exe /resetuserdata, /setup, /resetskippkgs, etc.). Lastly – I’ve applied every Service Pack and update applicable to my PC (ok, it belongs to my employer – but no one here has been able to figure this
out either).
After having worked this for several days now and, I think, exhausting every available avenue from search engines – I turn to you. Please let me know if you can help. Also, I can provide any additional
files or information you may require.
CBS

try: Devenv.exe /ResetSettings
http://msdn.microsoft.com/en-us/library/ms241273(v=vs.80).aspx
Or try this (it's for 2005, but maybe it works for 2008 aswell):
http://geekswithblogs.net/cicorias/archive/2007/10/10/Restoring-Missing-Toolbox-Items-in-Visual-Studio-2005---just.aspx
or try
http://stackoverflow.com/questions/1268298/how-to-rebuild-the-visual-studio-toolbox
"You can also go into the folder "C:\Documents and Settings\\Local Settings\Application Data\Microsoft\VisualStudio\9.0" and delete the *.tbd files. I have had to do this a couple times to get rid of duplicate items and when Reset Toolbox crashes
without warning"
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

Execute SQL task for Email ToLine using COALESCE and two variables

Hello...
I am converting an old DTS package to SSIS. The old package consist of mostly ActiveX Script so I am breaking it down into steps. Basically... I am retreving a set of records that need to be sent via email to multiple people. In my package to create
my ToLine for the Send Mail Task I am using several steps. Frist I am using:
SELECT CASE
          WHEN EXISTS ( SELECT        users.User_EmailAddress
FROM            dbo.Errors INNER JOIN
                         dbo.Users ON users.user_id = Errors.MonitorAuditor_User_Id
WHERE        ([Audit_Id] = ?) AND ([ErrorCode_Id] = ?) ) THEN
             1
          ELSE
             0
       END AS ValidEventID
I use this to see if there is any records to create my email string. This works fine. After this I have a Script Task that splits my pipe in two. When no records exist (User::ValidEventID == 0) I am loging that event to a log. When records do exist
I am using another Execute SQL task to create the actual ToLine:
Declare @combinedString VARCHAR(max)
SELECT      @combinedString = COALESCE(@combinedString + ', ', '') + Users.User_EmailAddress
FROM            dbo.Errors INNER JOIN
                         dbo.Users ON users.user_id = Errors.MonitorAuditor_User_Id
WHERE        ([Audit_Id] = ?) AND ([ErrorCode_Id] = ?)
SELECT convert(varchar(4000),@combinedString) as StringValue
I have my resultSet set to Single Row. I have two variables coming if for the Audit_Id and ErrorCode_Id. My Result Set is set to a Variable: User::EmailAddressString.
Next it goes through a foreach loop to map to the ToLine email variable that I created named User:User_EmailAddress.
Then I am using that in my Send Email Task.
It all works fine when I hard code my variables into the COALESCE statement but as soon as I replace that with the ? that SSIS requires for variables I am getting the following error:
[Execute SQL Task] Error: Executing the query "Declare @combinedString VARCHAR(max)
SELECT      ..." failed with the following error: "Syntax error, permission violation, or other nonspecific error". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly,
parameters not set correctly, or connection not established correctly.
I have tried changing my resultset property, I have checked my paramenters and my connection. I don't understand why it works fine when I have my varaiables hard coded but not when I change them to the ?.
Thanks in advance for you help in this matter.
Reach for the unknown!

Katherine... that did not work.
What I ended up doing was taking out the forloop all together. In my Execute SQL Task I changed the result set from single row to XML. I took out the COALESCE statement and just went for something more basic:
select users.User_EmailAddress + ';' as User_EmailAddress from Errors inner join users on users.user_id = Errors.MonitorAuditor_User_Id WHERE ([Audit_Id] = ? AND [ErrorCode_Id] = ?)
Currently I am just logging the string to a text file so I can see the results. In my text file the string is surrounded by <ROOT></ROOT>. So I will next I will work on triming that off the string and then populate my Send Mail Task.
This is how I trimed off the <ROOT></ROOT>:
Dts.Variables(
"EmailAddressString").Value = Replace(Dts.Variables("EmailAddressString").Value,
"<ROOT>",
Dts.Variables(
"EmailAddressString").Value = Replace(Dts.Variables("EmailAddressString").Value,
";</ROOT>",
Thanks again everyone for the help!
Reach for the unknown!

Failed to execute SQL via TxDataSource/JDBCConnectionPool

Similar Messages

Maybe you are looking for