Failed to load XML file

We are using RH10, output with WebHelp Pro. We recently upgraded our projects from RH9 to RH10. Performing a search in our online help generates the following error message: Failed to load XML file.
Is anyone else experiencing this issue? Any resolutions for this problem?
Thank you in advance for any help!

Hello again
If by "new specification" you mean that WebHelp Pro should only be used with RoboHelp Server, that would be a NO. It's always been the case that the "Pro" output was intended for use with RoboHelp Server. Now it could well be that RoboHelp 10 Pro output isn't as "forgiving" as earlier versions have been. I'm not sure.
Unfortunately we see so so many folks just gravitate right toward the "Pro" output in the misguided belief that it is somehow better or has more bells and whistles than the basic WebHelp has. But that's never been the case. What HAS always been the case is that the code driving things has been configured to work with the code on the RoboHelp server.
One change that I believe has occurred has been a renaming of the XML files that are created. So that may factor in here. I'm not sure. It might be best for you to just generate WebHelp output, then wholesale delete all the files from the server and publish fresh.
Cheers... Rick

Similar Messages

Failed to load XML file with Content ID 'XYZ'

Hello,
We are using UCM Version:11.1.1.8.1DEV-2014-01-06 04:18:30Z-r114490 (Build:7.3.5.185) with site studio for creating templates and web sites.
While switching to contribution mode, we find 'Failed to load XML file with Content ID 'XYZ' error.[Here XYZ is the local checkin content]
In region we are using dynamic converter to convert the style of native document here below are region and its element details.
<region id="region3" name="Add_Content_Here" flags="1111111100100" metadata="xIdcProfile%3AisHidden%3Dtrue%26xTemplateType%3AisHidden%3Dtrue%26xShowInStaff%3AisHidden%3Dtrue%26xShowInVisitors%3AisHidden%3Dtrue%26xShowInFaculty%3AisHidden%3Dtrue%26xDiscussionCount%3AisHidden%3Dtrue%26xDiscussionType%3AisHidden%3Dtrue" dccommand="ssIncDynamicConversionByRule(SS_DATAFILE, 'Colleges_Template_Rule')">
      
      <element id="region3_element1" name="Editor" label="Editor" type="1" flags="111111111111111111111100000111100000000000001111001110111010001111101000000000000000000000000000">
        
        <linktoregioncontent createnewxml="true" createnewnative="false" choosemanaged="true" chooselocal="false" choosenone="false">
          <choosemanagedquerytext corecontentonly="FALSE">
            <![CDATA[xWebsiteObjectType <Matches> `Data File` <OR> xWebsiteObjectType <Matches> `Native Document`]]>
          </choosemanagedquerytext>
        </linktoregioncontent>
      </element>
      <switchregioncontent createnewxml="true" createnewnative="true" choosemanaged="true" chooselocal="false" choosenone="false">
        <createnewnativedoctypes >
          <![CDATA[.doc,.docx,.txt,.rtf]]>
        </createnewnativedoctypes>
        <choosemanagedquerytext corecontentonly="FALSE">
          <![CDATA[xWebsiteObjectType <Matches> `Data File` <OR> xWebsiteObjectType <Matches> `Native Document`]]>
        </choosemanagedquerytext>
        <defaultmetadata >
          <![CDATA[xIdcProfile%3AisHidden%3Dtrue%26xTemplateType%3AisHidden%3Dtrue%26xCollegesList%3AisHidden%3Dtrue%26xShowInStudents%3AisHidden%3Dtrue%26xShowInStaff%3AisHidden%3Dtrue%26xShowInVisitors%3AisHidden%3Dtrue%26xShowInFaculty%3AisHidden%3Dtrue%26xArticleSection%3AisHidden%3Dtrue%26xDiscussionCount%3AisHidden%3Dtrue%26xDiscussionType%3AisHidden%3Dtrue%26dpTriggerValue%3DCSE]]>
        </defaultmetadata>
      </switchregioncontent>
    </region>



Regardrs,
Syed

Hi Syed ,
Add the following trace sections :
requestaudit,sitestudio*,system + Full verbose tracing
Clear the server output .
Replicate the same steps and once error shows up , refresh server output and copy the logs to a text file and upload here .
Thanks,
Srinath

Error: Failed to load xml file

Hi,
I have a multiple project output using RobohHelp HTML 9. In the online help system, when I search for certain terms, I encounter this message "Error: Failed to load xml file"
could anyone let me know if you have encountered the same and how you dealt with this?

Hi Jeff..i resolved the issue..
Given that i use merged webhelp, I checked the output of multiple projects. One of the online outputs from one of the projects was having this problem. So I cleared the Webhelp output folder and regenerated this project. This was the fix.
Now I encounter one more problem. When I search for information, the search bar shows 100% complete but the results would'nt show. Can you let me know if you have come across such a problem?

ORA-22288:file or LOB operation FILEOPEN failed while loading XML file.

Hello all,
I am getting the following error messages while loading XML file to Oracle 9i table.
declare
ERROR at line 1:
ORA-22288: file or LOB operation FILEOPEN failed
No such file or directory
ORA-06512: at "SYS.DBMS_LOB", line 504
ORA-06512: at line 10
The script I am using is all follows:-
1. Created a file ldxmldata.sh on unix server directory
dd conv=ucase if=$1|sed 's/<?XML/<?xml/'|sed 's/VERSION/version/'|sed 's
/RECORD/ROW/'|sed 's/DATE/TRANSDATE/'|sed 's/&/-/'|sed 's/\/DATE>// TRANSDATE>/'>$1.UCASE
sqlplus sales/sales@rac @upld.sql $1.UCASE
2. Created SQL file upld.sql on unix server
set serveroutput on
exec DBMS_JAVA.SET_OUTPUT(1000000);
@ldxml.sql bsl.xml.UCASE
commit;
exit
3. Created sql file ldxml.sql on unix server
declare
insCtx DBMS_XMLSave.ctxType;
rows number;
file bfile := bfilename('XML_DIR','&1');
charContent CLOB := ' ';
targetFile bfile;
warning number;
begin
targetFile := file;
DBMS_LOB.fileopen(targetFile, DBMS_LOB.file_readonly);
DBMS_LOB.loadfromFile(charContent,targetFile,DBMS_LOB.getLength(tar
getFile),1,1);
insCtx := DBMS_XMLSave.newContext('sales.s_price');
rows := DBMS_XMLSave.insertXML(insCtx,charContent);
DBMS_XMLSave.closeContext(insCtx);
DBMS_LOB.fileclose(targetFile);
end;
4. As Sys,
Created a directory XML_DIR and assigned it the path of Unix server directory
where the script files reside.
Granted read priviledge on XML_DIR to user sales.
I am getting the above error messages. Kindly help with some possible solution.
Arun Patodia
Bokaro Steel City

Hi guys,
Sybrand, aplogoies, the second line of the error stack was on one line in the first post, full error stack below:
ORA-22288: file or LOB operation FILEOPEN failed
The program issued a command but the command length is incorrect.
ORA-06512: at "SYS.DBMS_LOB", line 716
ORA-06512: at "JLMS.LOAD_DATA_UTIL", line 417
ORA-06512: at line 2I have looked at that error code as you mentioned, but the second line here doesn't really help much.
Hoek, i took your advice and tried to replace FILEOPEN with OPEn but got the same error.
Just to clarify as well, I am not using UNC or relative file paths as I know that these can cause problems.
Rgds
Dan

Failed to load XML from the package file "" due to error 0xC00CE556 "Invalid at the top level of the document.Line.

Using Installation wizard to deploy SSIS packages from DEV server to QA server package store cause this error;
Failed to load XML from the package file "" due to error 0xC00CE556 "Invalid at the top level of the document. Line 773, Column 93". This happens when loading a package and the file cannot be opened or loaded correctly into XML document. This can be the
result of either providing an incorrect file name to the LoadPackage method or the XML file specified having an incorrect format. Please who have the idea of how this issue can be resolved?BI Developer

Hi ,
for this Error one and only one solution
go to view Code, line number and Column number shown in error message,
and Remove code from there till last and save it, it happens when we are moving Package from one server to another server. and VS adds some lines of code at the bottom of package
something like this
andles="1" allownudging="1" isannotation="0" dontautolayout="0" groupcollapsed="0" tabstop="1" visible="1" snaptogrid="0">
<control>
<ddsxmlobjectstreaminitwrapper binary="00080000921400008c040000" />
</control>
<layoutobject>
<ddsxmlobj>
<property name="LogicalObject" value="{BBFB0E
Remove this code and save package it will work.
hope this will help to Developers who are searching for same ......... :)

XMLSocket "Failed to load policy file" error

I am trying to use an XMLSocket.swf file, and it is not connecting. Do I need to open up a port on my server? I am trying to run this on a dedicated remote Windows 2008 server.
Here is the error from FlashFirebug:
     OK: Root-level SWF loaded: file:///C|/Users/vcaadmin/AppData/Roaming/Mozilla/Firefox/Profiles/70vbx4ys.default/exten sions/flashfirebug%40o%2Dminds.com/chrome/content/flashfirebug.swf
    OK: Root-level SWF loaded: http://speak-tome.com/flash/XMLSocket.swf
    OK: Searching for <allow-access-from> in policy files to authorize data loading from resource at xmlsocket://speak-tome.com:9997 by requestor from http://speak-tome.com/flash/XMLSocket.swf
    Error: Failed to load policy file from xmlsocket://speak-tome.com:9997
    Error: Request for resource at xmlsocket://speak-tome.com:9997 by requestor from http://speak-tome.com/flash/XMLSocket.swf has failed because the server cannot be reached.
My crossdomain.xml is saved to the root of the web directory and looks like:
    <?xml version="1.0"?>
    <!DOCTYPE cross-domain-policy SYSTEM "http://www.adobe.com/xml/dtds/cross-domain-policy.dtd">
    <cross-domain-policy>
    <site-control permitted-cross-domain-policies="master-only"/>
    <allow-access-from domain="*"/>
    <allow-http-request-headers-from domain="*" headers="SOAPAction"/>
    </cross-domain-policy>
I notice that both ports 843 and 9997 are closed for my domain (speak-tome.com - 72.167.253.16) when I check using a service such as yougetsignal.com/tools/open-ports. Do I need to get these ports open to get the policy file to work?

As a test, I uploaded my Flash/Gaia site into an existing site on my old host. And although the site actually works in this setting, when I run things in the FlashPlayerDebugger, I'm still getting Security Sandbox Violations - so (as adninjastrator suggested in earlier post), this may have nothing to do with the DNS changes - but perhaps with my setting things up wrong somewhere so that the Flashplayer is trying to access my local computer - maybe??
Debugger logs gives me this:
Error: Failed to load policy file from xmlsocket://127.0.0.1:5800
Error: Request for resource at xmlsocket://127.0.0.1:5800 by requestor from http://recreationofthegods.com/bin/main.swf has failed because the server cannot be reached.
*** Security Sandbox Violation ***
So, I've now uploaded the identical bin (which contains all the files for my site) - but I'm getting different behaviors on the two hosts.
On the new holistic servers, the site won't go past the first page: www.yourgods.com
On the 1&1 servers, I still get runtime errors in FlashPlayerDebugger - but the site runs ok - http://www.RecreationOfTheGods.com/bin/index.html
Posting those links in hopes someone with more experience in these sandbox issues can help steer me in the right direction.

Loading XML File into Oracle 10G XE

I am trying to load an XML file into 10G XE from the Utilities interface, I have created a Table to load into but when I try to load I get the following cryptic error "XML Load Error". There is no other information, can someone give me some insight where to start to resolve this problem?

The error messages when importing fails provided by APEX 2.1 are not very useful as they do not provide any clue...
If possible, you can try to load XML file with SQL*Loader - probably you will get then more useful error messages.

Load XML file to XMLTable from FTP site Problem Oracle9i Release 9.2.0.7.

Hi,
I was wondering if it is possible to load XML file from FTP address directly to XMLType Table?
Can someone help me?
For example I have ftp site "ftp://test" and on this site I have file "file.xml"
and I would like to load "file.xml" to table "xml_tab" ?
I tried to use "load_xml" procedure and set DIRECTORY "xml_dir" to 'ftp://test' but I get this error
exec load_xml(p_dir=>'XML_DIR', p_filename=>'file.xml');
ERROR at line 1:
ORA-22288: file or LOB operation FILEOPEN failed
The network path was not found.
ORA-06512: at "SYS.DBMS_LOB", line 504
ORA-06512: at "P.LOAD_XML", line 8
ORA-06512: at line 1
Procedure looks like this:
(p_dir IN VARCHAR2,
p_filename IN VARCHAR2) AS
l_bfile BFILE := BFILENAME(p_dir, p_filename);
l_clob CLOB;
BEGIN
DBMS_LOB.createtemporary (l_clob, TRUE);
DBMS_LOB.fileopen(l_bfile, DBMS_LOB.file_readonly);
DBMS_LOB.loadfromfile(l_clob, l_bfile, DBMS_LOB.getlength(l_bfile));
DBMS_LOB.fileclose(l_bfile);
INSERT INTO xml_tab (
id,
filename,
xml
VALUES (
xml_tab_seq.NEXTVAL,
p_filename,
XMLTYPE.createXML(l_clob)
COMMIT;
DBMS_LOB.freetemporary (l_clob);
END;
I have tried also with this
select xdburitype('ftp://test/file.xml').getCLob() from dual;
but i get error
ERROR:
ORA-31001: Invalid resource handle or path name "ftp://test/file.xml"
Can you pleeeeeeas show me a way to do this, thanks ???

This will not work.. Ypu cannot use FTP to 'PULL' a document into the database. (Yes I know there's a placeholder for an FTPURITYPE() but it was never implemented).
However you can use an FTP client to PUSH content into the XML DB repository. If the content is schema based XML associated with a known (registered) XML schema the content of the file will automatically be stored in the default table associated with the root element of the file. If the content is not associated with an known XML schema you can then use xdburitype to read the resource that was created when the document was uploaded into the repository

Error while loading xml files using JDBC

Hi,
I am trying to load xml files into an xmltype table using JDBC calls and am getting this error for some files
LPX-00200: could not convert from encoding UTF-8 to UCS2
The xml files and our database are both UTF-8 encoded. The version of oracle that we have here is 9.2.0.6
Any suggestions in this matter will be greatly appreciated.
Thanks,
Uma

I also experienced this problem and unfortunately this solution didn't work for me given that the tag you suggested was already on the XML file.

Error while loading XML files into scott user

Hi All,
I'm new to xml files. I need to load xml files into database through OWB.
I have xml file in my local machine & am trying to load into table PO of Scott. Scott is registered as repository user.
Followed same steps as specified in userguide.
But, when executing the procedure ( in two ways one as just table name, and other as user.table name) it is showing the below error:
Procedure is:(1)--with username.tablename
begin
wb_xml_load(
'<OWBXMLRuntime>'||
'<XMLSource>'||
'<file>&&SAMPLES_DIR.sample1.xml</file>'||
'</XMLSource>'||
'<targets>'||
'<target dateFormat="yyyy.MM.dd">scott.PO</target>'||
'</targets>'||
'</OWBXMLRuntime>'
end;
ERROR at line 1:
ORA-20006: Error occurred while truncating target database object SCOTT.PO.
Base exception: ORA-01031: insufficient privileges
ORA-06512: at "OWBSYS.WB_XML_LOAD_F", line 12
ORA-06512: at "OWBSYS.WB_XML_LOAD", line 4
ORA-06512: at "SCOTT.SAMPLE1", line 3
ORA-06512: at line 1
Procedure is:(2) with out username
begin
wb_xml_load(
'<OWBXMLRuntime>'||
'<XMLSource>'||
'<file>&&SAMPLES_DIR.sample1.xml</file>'||
'</XMLSource>'||
'<targets>'||
'<target dateFormat="yyyy.MM.dd">PO</target>'||
'</targets>'||
'</OWBXMLRuntime>'
end;
ERROR at line 1:
ORA-20006: Error occurred while truncating target database object PO.
Base exception: ORA-00942: table or view does not exist
ORA-06512: at "OWBSYS.WB_XML_LOAD_F", line 12
ORA-06512: at "OWBSYS.WB_XML_LOAD", line 4
ORA-06512: at line 2
xml file:
<ROWSET>
<ROW>
<ID>100</ID>
<ORDER_DATE>2000.12.20</ORDER_DATE>
<SHIPTO_NAME>Adrian Howard</SHIPTO_NAME>
<SHIPTO_STREET>500 Marine World Parkway</SHIPTO_STREET>
<SHIPTO_CITY>Redwood City</SHIPTO_CITY>
<SHIPTO_STATE>CA</SHIPTO_STATE>
<SHIPTO_ZIP>94065</SHIPTO_ZIP>
</ROW>
</ROWSET>
Note: Everything works fine if I create PO table in OWBSYS user and execute the procedurein OWBSYS user. OWBSYS.PO table will be loaded.
What privileges are missing, what shouldI do if I want to execute the procedure from scott user and load the table of scott.
Thanks in advance for the help.
Regards,
Joshna

Hi Joshna,
Please follow below steps to load xml file to oracle database.
1.First connect to owb (Design Center) through your repository owner user (ex : REP_OWNER).
2. Import WB_XML_LOAD procedure . and exit to repository owner.
3. connect to owb design center through your repository user (ex : REP_USER)
Create New mapping and drag one Constant Operator and create one attribute, paste / edit following code
'<OWBXMLRuntime>'||
'<XMLSource>'||
'<file>E:\SOURCE\emp.xml</file>'||
'</XMLSource>'||
'<targets>'||
'<target truncateFirst = "FALSE" dateFormat="yyyy.MM.dd">rep_user.emp</target>'||
'</targets>'||
'</OWBXMLRuntime>'
4. Drag pre mapping operator and select WB_XML_LOAD procedure
5. Connect Constant Operator attribute to pre mapping operator.
6. Drag two dummy tables and connect source to target. (ex : drag t1 (table) tab two times and connect.
7. Validate and deploy the mapping.
8. grant necessary grant command to rep_owner user to rep_user user.
(Note : target truncateFirst = "FALSE" by default truncate the table. So you have to give grant privileges
To rep_user , select ,insert, delete privileges.
9. Execute the mapping , and check EMP table. (Note : before loading EMP table delete all records ).
10 . If you want more description please go through the below link
http://download.oracle.com/docs/html/A95931_01/apf.htm
Regards
Venkat

Load XML file from addon domain without cross-domain Policy file

Hello.
Assuming that there are two addon domains on the same server: /public_html/domain1.com      and      /public_html/domain2.com
I try to load XML file from domain2.com into domain1.com without using cross-domain policy file (since it doesn’t work on xml files in my case).
So the idea is to use php file in order to load XML and read it back to flash.
I’ve found an interesting scripts that seems to do the job but unfortunately I can't get it to work. In my opinion there is somewhere problem with AS3 part. Please take a look.
Here are the AS3/PHP scripts:
AS3 (.swf in www.domain1.com):
// location of the xml that you would like to load, full http address
var xmlLoc:String = "http://www.domain2.com/MyFile.xml";
// location of the php xml grabber file, in relation to the .swf
var phpLoc:String = "loadXML.php";
var xml:XML;
var loader:URLLoader = new URLLoader();
var request:URLRequest = new URLRequest(phpLoc+"?location="+escape(xmlLoc) );
loader.addEventListener(Event.COMPLETE, onXMLLoaded);
loader.addEventListener(IOErrorEvent.IO_ERROR, onIOErrorHandler);
loader.load(request);
function onIOErrorHandler(e:IOErrorEvent):void {
    trace("There was an error with the xml file "+e);
function onXMLLoaded(e:Event):void {
    trace("the rss feed has been loaded");
    xml = new XML(loader.data);
    // set to string, since it is passed back from php as an object
    xml = XML(xml.toString());
    xml_txt.text = xml;
PHP (loadXML.php in www.domain1.com):
<?php
header("Content-type: text/xml");
$location = "";
if(isset($_GET["location"])) {
    $location = $_GET["location"];
    $location = urldecode($location);
$xml_string = getData($location);
// pass the url encoded vars back to Flash
echo $xml_string;
//cURLs a URL and returns it
function getData($query) {
    // create curl resource
    $ch = curl_init();
    // cURL url
    curl_setopt($ch, CURLOPT_URL, $query);
    //Set some necessary params for using CURL
    curl_setopt($ch, CURLOPT_SSL_VERIFYPEER, false);
    curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1);
   //Execute the curl function, and decode the returned JSON data
    $result = curl_exec($ch);
    return $result;
    // close curl resource to free up system resources
    curl_close($ch);
?>

I think you might be right about permissions/settings on the server for php. Unfortunately I'm not allowed to adjust them.
So I wrote my own script - this time I used file path instead of http address of the XML file. It works fine in my case.
Here it is:
XML file on domain2.com:
<?xml version="1.0" encoding="UTF-8"?>
<gallery>
    <image imagePath="galleries/gallery_1/images/1.jpg" thumbPath="galleries/gallery_1/thumbs/1.jpg" file_name= "1"> </image>
    <image imagePath="galleries/gallery_1/images/2.jpg" thumbPath="galleries/gallery_1/thumbs/2.jpg" file_name= "2"> </image>
    <image imagePath="galleries/gallery_1/images/3.jpg" thumbPath="galleries/gallery_1/thumbs/3.jpg" file_name= "3"> </image>
</gallery>
swf on domain1.com:
var imagesXML:XML;
var variables:URLVariables = new URLVariables();
var varURL:URLRequest = new URLRequest("MyPHPfile.php");
varURL.method = URLRequestMethod.POST;
varURL.data = variables;
var MyLoader:URLLoader = new URLLoader;
MyLoader.dataFormat =URLLoaderDataFormat.VARIABLES;
MyLoader.addEventListener(Event.COMPLETE, XMLDone);
MyLoader.load(varURL);
function XMLDone(event:Event):void {
    var imported_XML:Object = event.target.data.imported_XML;
    imagesXML = new XML(imported_XML);
   MyTextfield_1.text = imagesXML;
   MyTextfield_2.text = imagesXML.image[0].attribute("thumbPath"); // sample reference to attribute "thumbPath" of the first element
php file on domain1.com:
<?php
$xml_file = simplexml_load_file('../../domain2.com/galleries/gallery_1/MyXMLfile.xml'); // directory to XML file on the same server
$imported_XML = $xml_file->asXML();
print "imported_XML=" . $imported_XML;
?>
Regards
PS: for those who read the above discussion: the first and the second script work but you must test which one is better in your situation. The first script will also work between two domains on different servers. No cross domain policy file needed.

Can I load xml file from SWC without using @embed

I'm developing a mobile application in which I need to load xml files from File.applicationDirectory. This works great if the xml files are part of the main application swf. But I would like to move these xml files into a SWC so they could be shared across multiple applications.
Using FlashBuilder 4.5, when a SWC is built, I can specify files to embed in the library that are not assets (Assets Tab of Flex Library Build Path). For various design reasons, I do NOT want to embed the xml files via @embed.
When the swc is built and I open it up using a zip utility, I see the xml files in there just fine. So they are being bundled with the SWC. But how can I load these files in my main application that does not involve using @embed? When the main application is built, the swc setting for link type is "merged into code".
I wouldn't expect the application to automatically pull out the xml files from the swc and place them in the File.applicationDirectory on the mobile device. I've tried loading from there just in case but file.exists is false (as expected).
I've searched the web (and continue to do so) and all the answers seem to be to use @embed. Is there another way?
Randy

It's actually a lot easier than you think.
Just reference the file like any'ol URL using a path relative to the SWC's src directory.
So if you include the file "assets/xml/some.xml", just use that same string like you would any remote resource.
For example:
var loader:URLLoader = new URLLoader( new URLRequest("assets/xml/some.xml"));
I believe it would also work like this "/assets/xml/some.xml", but I prefer relative paths so the link doesnt break if moved out of the SWC...

How to load XML files ? HELP!

Hi folks.
We have an old Oracle database 7.3..
So we need to load XML files into its tables.
As we understand Oracle Loader doesn't help us.
Is the way to load that files?
Thanks in advance
Alex

I know you realize 7.3 is old but this is sort of like trying trying to view a DVD when you only have a VCR. Simple answer would be buy a DVD player, i.e. upgrade to a more recent version of Oracle where you will get many features to handle XML.
How do you want the XML loaded, all as a single object? That could be a CLOB column if 7.3 had them, I am not sure. You would probably have to write PL/SQL and something with UTL_FILE (if 7.3 had that) to load it.
If you want to put it multiple columns based on its tags, you would be better off parsing it using PERL (or something) into a CSV and loading that in SQL*Loader.
I assume as this is using XML it is a reasonably recent design, combining that with an ancient version of the database is just going to lead to endless headaches.

Loading XML file

Hi All,
How to load xml file from backend.
i have 5 xml files in databse. i need to get the xml files from database sequentially .means i need to get in a for loop.
how can i do this.
any one can help?
thanks
Raghu

is your front end in Flex?
Sammi

Loading XML File to Physical table in BW

Hi,
I have a requirement to load XML file BW physical table.
The XML file that I am getting looks pretty complex compared to the XML file I have seen online.
I need help in transforming the file and Abap code to load the file to physical table
I have already created the table in SE11.
XML file
<?xml version="1.0"?>
<?mso-application progid="Excel.Sheet"?>
<Row ss:AutoFitHeight="0" ss:Height="36">
    <Cell ss:StyleID="s62"><Data ss:Type="String">First Name</Data></Cell>
    <Cell ss:StyleID="s62"><Data ss:Type="String">Bank Name -
add. info</Data></Cell>
   </Row>
   <Row ss:AutoFitHeight="0" ss:Height="22.5" ss:StyleID="s67">
    <Cell><Data ss:Type="String">John Mayor</Data></Cell>
    <Cell><Data ss:Type="String">New: Local bank</Data></Cell
   </Row>
my requirement is to get this values into physical table i.e
First name                 bank name
John Mayor               new: local bank
thanks
Edited by: Bhat Vaidya on Apr 14, 2010 11:59 AM
Edited by: Bhat Vaidya on Apr 14, 2010 12:00 PM
Edited by: Bhat Vaidya on Apr 14, 2010 12:01 PM
Edited by: Bhat Vaidya on Apr 14, 2010 12:01 PM

No longer working on the issue.

Failed to load XML file

Similar Messages

Maybe you are looking for