Failed to parse SQL query by one user

Hi all,
in my app i have a text-item with a submit button. In this item i type a name and a report after the item-region show me the result(s). this works for all my users (>2000) perfectly, but one of this users become an error in the report-region:
failed to parse SQL query:
ORA-01403: no data found
We try this with the same searchstring on the same computer/browser. If i logged in the result is ok, if the user logged in, the error message shows. If i try this on the computer from the user with me logged in, result ok. If the user try this on an other pc, results error.
I have an productive and a developer workspace. In the developer workspace the user can try this perfectly without errors. Only in the productive workspace the error shows.
The SQL-Select in the reprirt ist verry simple:
select id
, name
, raum
from table
where instr(upper(name), upper(:P60_SEARCH))>0
However all users can use this search-field with report perfectly, only this one user has the error. It is no restrictions on this item or report.
Can anybody help me?

Carsten,
user preferences do not have anything to do with the fact where the user resides (apex built in, LDAP, whatever). User Preferences are saved for a named user and they are loaded next time the same user loggs in. For example, if you sort your report on a column x, apex will save this as a setting and next time you call the same report, this report will be sorted the same way. Since you don't have a permission to edit services, you should check your adminstrative permissions and conntact the real administrator of the workspace to do that "purge prefference" for you. I could bet this is the reason you are getting that strange error message.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
------------------------------------------------------------------------------

Similar Messages

Failed to parse SQL query: ORA-01403: no data found

I'm going to post and answer my own question in the hope that others will not have to struggle with this error.
Using a report of the type PL/SQL Function Body Returning SQL and using generic columns you may run into this error
failed to parse SQL query:
ORA-01403: no data found
The SQL will run stand alone but the report fails.
There is a setting just below the source you should check:
"Maximum number of generic report columns"
In my case the number of columns was dynamic and when it exceeded the number set as the maximium number of generic columns I received the 1403 error.
Hope this helps someone.
Greg

Thanks for much for the pointer. For anyone else struggling with this too, I found that my generic columns had unordered themselves. Reordering them solved the problem for me.
Edited by: user11096971 on Jul 22, 2010 3:19 AM

Classic Report CSV output failed to parse SQL query

Hi,
I'm trying to get a CSV output from a classic report. I'm generating the report based on a PL/SQL block that will return an SQL query. But when i download the CSV excel just gives me a:
failed to parse SQL query:
ORA-00936: Missing expression
and shows me the query that the application is trying to parse. I'm also using bind variables (page items) in the PL/SQL block that is returning me the SQL query. I think that the reason that it fails to parse the query is that the query that is shown in excel has no bind variable values.
Anyone got any ideas?

Hi Arif,
run your page in debug mode and check out the SQL statement which is actually executed for the report. That might help to diagnose what is going wrong.
If you wish you can also post the report SQL statement which is getting executed.
Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

Report failed to parse SQL query:ORA-01745: invalid host/bind variable name

Hi,
We are currently upgrading from v2.2.0.00.32 to v4.0.0.00.46.
I have copied the applications onto our test server along with the various database objects and data etc.
When I am running a report in v4, it is failing with the following error: "failed to parse SQL query: ORA-01745: invalid host/bind variable name".
When I copy the SQL that builds the report into TOAD (on out test server) it runs OK so really cant see why it would fail in APEX. It works fine when I run the query in our APEX v2 and in TOAD in our live server.
The query is as follows:
SELECT
aea.ALTERATION_ID
,aea.ALTERATION_ID "ALTERATION_ID_DISPLAY"
,aea.assembly_name "Revised BOM"
,assembly.description "Revised BOM Description"
,assembly.INVENTORY_ITEM_STATUS_CODE "Revised BOM Status"
,aea.BEFORE_CHANGE_QTY
,flv.MEANING "Alteration Type"
,aea.component_name "Part No"
,component.description "Part No Description"
,component.INVENTORY_ITEM_STATUS_CODE "Part No Status"
,aea.AFTER_CHANGE_QTY
,TO_CHAR(aea.last_update_date,'DD-MM-YYYY HH24:MI:SS')"Last Update Date"
,aea.LAST_UPDATE_BY
,aea.COMMENTS
,aea.ORACLE_CHANGE_NOTICE
,AEA.SELECTION_CRITERIA
FROM XXMEL_APEX_ECO_ALTERATIONS aea
, fnd_lookup_values flv
, (SELECT INVENTORY_ITEM_STATUS_CODE
,segment1
,description
FROM mtl_system_items_b
WHERE 1=1
AND organization_id = 26) component
, (SELECT INVENTORY_ITEM_STATUS_CODE
,segment1
,description
FROM mtl_system_items_b
WHERE 1=1
AND organization_id = 26) assembly
WHERE 1=1
AND aea.COMPONENT_NAME = component.segment1 (+)
AND aea.assembly_NAME = assembly.segment1 (+)
AND flv.lookup_code = aea.acd_type
AND aea.eco = :P13_ECO
AND flv.lookup_type = 'ECG_ACTION'
AND modify_flag = 'Y'
ANy help would be great,
Thanks
Chris
Edited by: Cashy on 22-Nov-2010 04:13
Edited by: Cashy on 22-Nov-2010 04:14

For some reason, the updatable fields (this is a updateable report) where not connecting to the database properly. Whn I changed them to a report columns and removed the database field reference, the report rendered

Chart Query and Failed to parse SQL query

Hi,
first of all, this is not a question. It is a reminder for me and maybe for someone with the same problem.
I just fell over this for the 123124 time.
I have a 3D Chart Query
select sum(order_ok) value,
      count(*) maximum_value
from      v_dialer_campaign
where campaign_uuid = :P300_CAMPAIGN_IDSaving fails with
"1 error has occurred Failed to parse SQL query!" ...
Saving the query without validation works, but does not show any result in the chart.
v_dialer_campaign is a view selecting from a view in a mssql db over database link and HS.
running the select in sqlplus or toad works.
Without any trace on freetds/unixodb/hs side, i would have not found the following line:
[FreeTDS][SQL Server]The data types nvarchar and text are incompatible in the equal to operator.[FreeTDS][SQL Server]Statement(s) could not be prepared.
Solution:
with q as (select :P300_CAMPAIGN_ID val from dual)
select     sum(order_ok) value,
     count(*) maximum_value
from     v_dialer_campaign
where     campaign_uuid in ( select val from q)Maybe the error output when validating the query should be included in the APEX error message.
Same solution applies for dynamic LOV's reading from HS using a where clause.

I tried your first query on Apex 3.2 and it created a nice dial chart.
Is there any ORA-xxxxx error along with the "failed to parse SQL query" message? Did you double check column & table name spelling?
P.S. The second query is invalid (a superfluous comma after the second column).

Column sort gives "failed to parse SQL query"

Hi folks,
I have a page with a chart and 5 reports. All report columns are sortable.
When I first navigate to the page from a menu, the chart and all reports display correctly. Given certain query criteria, reports 2 and 4 correctly return no data, and show my polite 'no data found' message.
If I sort report 1 or 3 or 5 by clicking a column heading, the chart and reports 1, 3 and 5 display correctly, but in report regions 2 and 4 I then get
failed to parse SQL query:
ORA-06502: PL/SQL: numeric or value error: NULL index table key valueThese errors can be cleared by navigating to the page again from a menu.
What's wrong? How can I fix it?
I'm at 1.6.0.00.87, db 10.1.0.3.0.
All ideas gratefully received.
Thanks
John D

OK, I now have a workspace.
I recreated the problem using page 1 of the Sample Application (app 15027).
1 - Copy region "My Top Orders" to "My Top Orders 2" on page 1 (same display point, column 2).
2 - Edit the SQL of "My Top Orders 2" to remove the ORDER BY clause.
3 - Edit the columns of "My Top Orders 2" to make all columns other than ORDER_ID sortable.
4 - Copy region "My Top Orders 2" to "My Top Orders 3" on page 1 (same display point, column 2)..
5 - Run page 1
6 - Click a column heading on "My Top Orders 2" and I got "failed to parse..." on "My Top Orders 3".
BUT it's intermittent. Navigate away from page 1 then return, and you may find the error doesn't recur.
So, what's up Doc?
Many thanks,
John

Fail to parse SQL query after report attributes changes on sample app

This errors occurs in the sample application istalled in Workspace PMW on the http://htmldb.oracle.com web site. Goto home page, edit Page 1, Select "Top Orders" in Region, select report attributes, change max count from 5 to 5 in "Layout and Pagination", apply changes, run page and parse SQL error occurs. Select "debug" and the following is shown regarding the query.
0.10: query could not be parsed:
SELECT a.ORDER_ID, a.ORDER_TIMESTAMP, a.CUSTOMER_ID,
b.cust_last_name || ', ' || b.cust_first_name cust_name, NVL(a.ORDER_TOTAL, 0)
FROM demo_orders a, DEMO_CUSTOMERS b
WHERE a.customer_id = b.customer_id
ORDER BY NVL(a.ORDER_TOTAL, 0) DESC order by 5 desc,5 desc
failed to parse SQL query:
ORA-00933: SQL command not properly ended
I can't see that I'm doing anything wrong but maybe someone can shed some light on this!
Thanks

this is sort of an oversight on our part. what's going on is that the sample app installs with that order by clause in the query. at the same time, the report attributes page for that region has a default sort sequence value of "1 desc" (even though column heading sorting isn't enabled). when you go to that page and try to apply any change, htmldb tries to set things up correctly for you...and you end up with that double order by. the best way to avoid the issue is to remove the order by clause from the query on the Region Definition page.
hope this helps,
raj

Failed to parse SQL Query - External Tables [Apex 4.0.2]

Greetings experts -
Has anyone encountered errors when creating a report in Apex that sources from an external table within the database? I'm using the 4.0.2 version that is packaged with the 11g XE edition on 64bit CentOS.
For example, I might run:
SELECT NULL LINK,
COL1 LABEL,
COL2 VALUE
FROM MYTAB;
Where MYTAB is an external table sitting on top of a comma-separated file. When I go to create the page, I'm prompted with the "Failed to parse SQL" dialogue.
I noticed that if I did CTAS on the external table, and referenced the CTAS table, my page ran without problem!
Any ideas? Is this a known "limitation" of Apex?
Thanks,
CJ

Chiedu,
Please try removing all declarative validations on this tabular form, and see if it works as expected then. There are some limitations on the type of views and joins that are supported by tabular forms when using the new declarative validations, i.e. you'll need a key preserved table in your view or join.
Regards,
Marc

Combine multiple web services with the same SQL query into one

Hello,
I would like to ask a question regarding combine multiple similar web services into one. Can you please tell me if it is possible to combine 4-5 web services into one since they built on the same SQL query with 5 different criterias or condition so that the user can enter any of the 5 criterias to populate the data on the form instead of having 5 different web services?
e.g Query: Select appName, permit#, address, phone, description, type, section, from table where appName = can be 'appName, permit#, address, phone, or description' to populate the rest of the data to the form.
Does any one have ever done some thing like this in Workbench ES? If so please assist. I know it can be easier to build it in Visual Basic, C#, or dot.net but the requirement is to build it in workbench ES.
Thanks in advance,
Han Dao

If you are querying for Name, PhoneNumber, and SSN, and you queried for all people with a phone number that started with 867, you would have a potentially long list of people. So to keep track of all of the people, we store each record in XML complex elements. The root node is just any name you want, and the repeating element is the complex element name.
So using the example from above, I'm going to specify the following:
     Root Node: Result
     Repeating Element: Person
So now when I do a query, my resultXML will look like:
<Result>
      <Person>
             <Name>Alex</Name>
             <PhoneNumber>867-5309</PhoneNumber>
             <SSN>111-11-1111</SSN>
      </Person>
</Result>
If your query returned multiple results (like ours would probably), it would look like:
<Result>
      <Person>
             <Name>Alex</Name>
             <PhoneNumber>867-5309</PhoneNumber>
             <SSN>111-11-1111</SSN>
      </Person>
      <Person>
             <Name>Han</Name>
             <PhoneNumber>867-2169</PhoneNumber>
             <SSN>222-22-2222</SSN>
      </Person>
</Result>
So Result and Person is just to give a little bit of structure to the xml result (containers really). So you can name them whatever is helpful for you.
The column name mappings map the query columns (Name, PhoneNumber, SSN) to some node in the XML (Name, PhoneNumber, SSN). So you don't need to specify which field maps to what in the form. Just copy the column names to the element name so you have a 1-to-1 naming. If you want to manipulate the XML a bit though, you could do:
Column Name               Element
Name                            YourName
PhoneNumber                Phone
SSN                              Secret
which would then make your xml look like:
<Result>
      <Person>
             <YourName>Alex</YourName>
             <Phone>867-5309</Phone>
             <Secret>111-11-1111</Secret>
      </Person>
</Result>
It lets you change the XML element names to whatever you want. Otherwise by default they take on their column names.
In your form, you could bind to the WSDL through the Data Connections pane and point it to your web service. This will then create form elements that you can just drag and drop allowing you to have the information available when the service gets ran. Once the service is called, you can modify the field's data to get whatever information you need in order to populate other form fields.
If that is too confusing, feel free to send me your form (e-mail is on profile page) and I'll add comments to it to show you how to set up the form for the web service call (and also give me the link to your webservice)

Failed to parse SQL Expression Field

Hi,
I design a report with an SQLExpressionField. When I change datasource at runtime:
reportClientDoc.getDatabaseController().setTableLocation(table, tableNew);
I got this error:
ERROR com.businessobjects.reports.sdk.JRCCommunicationAdapter - detected an exception: Failed to parse expression.
at com.crystaldecisions.reports.reportdefinition.SQLExpressionFieldDefinition.ta(Unknown Source)
How should I handle SQLExpressionFields?
I am using CRJ (2.0.1.r566)

Could be a couple of reasons.
You can't use SQL SELECT statments in SQLExpressions, they were not nor are they supported to be used this way.
SQLExpressions functions are defined in the Driver you are using so it may be you are not using the same Driver version as originally created with.
Need more info on the driver you are using and the Expression SQL you are using?
It may be you are failing to log on to the new server also.
Don

High Concurrent SQL query of DBSNMP user

OS Linux
DB 11.2.0.2
we have a 12 node RAC box on exadata. We are doing the monitoring through the OEM GRID. In the 12th node we see a high concurrent sql query owned by the DBSNMP user.The concurrency is about 98% and it the top query in that instance. Please suggest me what we shoud do to decrease it.
Below is the query
SELECT s.inst_id, s.name, i.instance_name
FROM gv$active_services s, gv$instance i
WHERE s.name = :p1 AND s.inst_id = i.inst_id

Hi,
We applied the patch 9482559 which was suggested by oracle for a different issue and after applying this patch the high concurrent dbsnmp sql issue is gone.

Executing SQL-query based on user input in text-box on APEX page

Hi,
I'm new to developing in APEX, and I encountered a problem...
Is it even possible to make such thing: use text area for input of some SQL-query and then execute it on my schema and show results in report item? And if the answer is yes, can somebody provide me tips on how to do that?
Thanks in advance.

Denes Kubicek wrote:
I think this example shows something similar:
https://apex.oracle.com/pls/apex/f?p=31517:91
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.apress.com/9781430235125
https://apex.oracle.com/pls/apex/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
-------------------------------------------------------------------I see there is executing stored queries example, and text area showing executed one, but not quite understand how to sent sql-query directly from text input, based on your example :/

Fail to create SQL query report because of ORA-00923

Hi expert,
I would like to SQL query report using the following query:
select min(identified_date) first_identified,
max(actual_COMPLETE) last_closed,
count(id) total_issues,
sum(decode(status,'Open',1,0)) open_issues,
sum(decode(status,'Pending',1,0)) pending_issues,
sum(decode(status,'Resolved',1,0)) closed_issues,
sum(decode(status,'Will Not Resolve',1,0)) not_resolve_issues,
sum(decode(status,
'Open',decode(priority,null,1,0),
0)) open_no_prior,
sum(decode(status,
'Open',decode(priority,1,1,0),
0)) open_prior_1,
sum(decode(status,
'Open',decode(priority,'2',1,0),
0)) open_prior_2
sum(decode(status,
'Open',decode(priority,3,1,0),
0)) open_prior_3,
sum(decode(status,
'Open',decode(priority,'4',1,0),
0)) open_prior_4,
sum(decode(status,
'Open',decode(priority,5,1,0),
0)) open_prior_5
from SOFTPROJ_issues
where project_id = :P83_PROJECT
However, I got the following error during the steps of creation:
1 error has occurred
Query cannot be parsed, please check the syntax of your query. (ORA-00923: FROM¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿)
I wonder why if it is getting the error because I could create the report with the following query without problems:
select min(identified_date) first_identified,
max(actual_COMPLETE) last_closed,
count(id) total_issues,
sum(decode(status,'Open',1,0)) open_issues,
sum(decode(status,'Pending',1,0)) pending_issues,
sum(decode(status,'Resolved',1,0)) closed_issues,
sum(decode(status,'Will Not Resolve',1,0)) not_resolve_issues,
sum(decode(status,
'Open',decode(priority,null,1,0),
0)) open_no_prior,
sum(decode(status,
'Open',decode(priority,1,1,0),
0)) open_prior_1,
sum(decode(status,
'Open',decode(priority,3,1,0),
0)) open_prior_3,
sum(decode(status,
'Open',decode(priority,5,1,0),
0)) open_prior_5
from SOFTPROJ_issues
where project_id = :P83_PROJECT
1 error has occurred
Query cannot be parsed, please check the syntax of your query. (ORA-00923: FROM¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿)
The difference is to add the followings only:
sum(decode(status,
'Open',decode(priority,'2',1,0),
0)) open_prior_2
sum(decode(status,
'Open',decode(priority,'4',1,0),
0)) open_prior_4,
Does anyone have any idea to resolve the issue?
Thanks in advance,
Rui

By putting a comma after open_prior_2:
sum(decode(status,
'Open',decode(priority,'2',1,0),
0)) open_prior_2,Sima

Mail delivery failed: returning message to sender (Only One User)

Hi,
I am facing really strange issue from last two days but fail to resolve the issue.
My hosted exchange 2010 is working absolute fine. I configured new domain (previously using SBS2003 with Postini service), all users are working fine no spam emails, NDR etc (We are using Forefornt Protection 2010 for Exchange Server, All engines are updated)
but only one user/email address continuously receiving spam emails. Please review the attach pictures of Message Tracking, Email and Header.
I really don't know what is the issue, users continuously receiving below emails after 2 or 3 minutes, i am just wondering why my exchange server allow those email address. How i can stop these emails.
Note: Old SBS server is shutdown. Postini service is already disabled.
Please help me.
Mail:
Header & Tracker:

Hi,
According to your description, it seems that the user's computer has virus.
I recommend you scan the user's computer and check if any virus caused the issue.
Thanks.
Niko Cheng
TechNet Community Support

Problem with SQl Query - Easy One

We have a doubt on query......
We have a column with values R5555_12345, R44544_12367, R44544_29863, R124_214A4.............
We want the output as R5555, R44544, R44544, R124....... i.e all the characters that preceeds "_"(Underscore) symbol.
Can anyone suggest the command or predefined function that extracts the preceeded characters of "_" symbol which will be of great help.
Thanks in advance.

Hi,
Thanks alottely I wanted to test the same query in AS400 DB where it failed.
Anyway thanks alot for the help.
Incase if any one has knowledge of AS400 DB working... please help me in solving the issue.

Failed to parse SQL query by one user

Similar Messages

Maybe you are looking for