Failed to sqlplus into ASM with the notorious ORA-12505 error

Hi guys,
I have a 2-node RAC testing environment and i have been having trouble trying to LOCALLY sqlplus into the ASM instance.
If I do "sqlplus sys/xxxxx@asm1", it just throws "ORA-12505:TNS: listener does not currently know of SID given in connect descriptor".
If I do "sqlplus / as SYSASM", it says "ORA-01031: insufficient privileges".
Can' figure out where I did wrong so really appreciate some help here (maybe in the listener file, i should give the GRID home for one of the ORACLE_HOME parameters)?
Here is the tns and listener file:
tnsnames.ora:
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = vbox-cluster)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORCL)
ASM1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = vbox-cluster)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SID = +ASM1)
listener.ora:
LISTENER=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER)))) # line a
dded by Agent
LISTENER_SCAN1=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN1))))
# line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN1=ON # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER=ON # line added by Agent
SID_LIST_LISTENER_ASM=
(SID_LIST=
(SID_DESC=
(SID_NAME=PLSExtProc)
(ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1)
(PROGRAM=extproc)
(SID_DESC=
(ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME=+ASM1)
)

user11957149 wrote:
Hi guys,
I have a 2-node RAC testing environment and i have been having trouble trying to LOCALLY sqlplus into the ASM instance.
If I do "sqlplus sys/xxxxx@asm1", it just throws "ORA-12505:TNS: listener does not currently know of SID given in connect descriptor".
If I do "sqlplus / as SYSASM", it says "ORA-01031: insufficient privileges".
Can' figure out where I did wrong so really appreciate some help here (maybe in the listener file, i should give the GRID home for one of the ORACLE_HOME parameters)?
Here is the tns and listener file:
tnsnames.ora:
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = vbox-cluster)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORCL)
ASM1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = vbox-cluster)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SID = +ASM1)
listener.ora:
LISTENER=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER)))) # line a
dded by Agent
LISTENER_SCAN1=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN1))))
# line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN1=ON # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER=ON # line added by Agent
SID_LIST_LISTENER_ASM=
(SID_LIST=
(SID_DESC=
(SID_NAME=PLSExtProc)
(ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1)
(PROGRAM=extproc)
(SID_DESC=
(ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME=+ASM1)
)with regard to ASM instance, it is NEVER "online"
There is never any requirement to connect to ASM instance via SQL*Net.
Log onto DB Server directly & just start ASM instance

Similar Messages

Memeber server in a domain connected with external trust. The agent operation failed, DPM could not communicate with the DPM agent. Error ID 270

I manually installed the agent on a member server in a domain (domainB) that has an external trust with the domain the DPM 2010 server, mydpmserver.domainA.int, is in.
I pointed the agent on myprotectedserver with setdpmserver -dpmservername mydpmserver.domainA.int
I successfully ran attach-productionserver.ps1 in DPM Management Shell.
When I click refresh in DPM 2010 Administrator Console/Management/Agents I get error id: 270
The agent operation failed on myprotectedserver.domainB.int because DPM could not communicate with the DPM protection agent. The computer may be protected by another DPM server, or the protection agent may have been uninstalled on the protected computer.
If myprotectedserver.domainB.int is a workgroup server, the password for the DPM user account could have been changed or may have expired.
I can ping myprotectedserver.domainB.int from mydpmserver.domainA.int
DPM 2010 backup of the domain_controller.domainB.int works fine.
The application log on myprotectedserver.domainB.int does not show any DPMRA related event logged.
The firewall on myprotectedserver is off.
Computers in domainA and domainB use their own networks connected through a router.
from mydpmserver
net view \\myprotectedserver.domainB.int /all - successfull
sc \\myprotectedserver.domainB.int query OpenSCManager FAILED 5, Access is denied
wmic /node:myprotectedserver.domainB.int OS list brief Error 0x80070005, Access is denied
from domaincontroller.domainB.int:
sc \\myprotectedserver.domainB.int query successfull
wmic /node:myprotectedserver.domainB.int OS list successfull
Any suggestions on how can I fix this?

Hi
I know this is old but are you still having a problem?

How do you put safari web pages into icloud with the safari iCloud button?

how do you put safari web pages into icloud with the safari iCloud button?

What that button does is sync your tabs between your devices. So if you have multiple macs with Mountain Lion and/or devices with iOS 6 (once it comes out this fall) you can pick up where you left off. For example, let's say I have apple.com, nytimes.com, and facebook.com open on my mac, but I need to run. Later, if I need to use another computer in my household, I can just restore the tabs that I was using before on this other mac.

I have a large number of photos imported into iPhoto with the dates wrong. How can I adjust multiple photos (with varying dates) to the same, correct, date?

I have a large number of photos imported into iPhoto with the dates wrong. How can I adjust multiple photos (with varying dates) to the same, correct, date?

If I understand you correctly, when you enter a date in the Adjust Date and Time window, the picture does not update with the date you enter. If that is the case then something is wrong with iPhoto or your perhaps your library.
How large a date change are you putting in? iPhoto currently has an issue with date changes beyond about 60 years at a time. If the difference between the current date on the image and the date you are entering is beyond that range that may explain why this is not working.
If that is not the case:
Remove the following to the trash and restart the computer and try again:
Home > Library > Caches > com.apple.iphoto
Home > Library > Preferences > com.apple.iPhoto (There may be more than one. Remove them all.)
---NOTE: to get to the "home > library" hold down option on the keyboard and click on "Go" > "Library" while in the Finder.
Let me know the results.

Verify permissions failed: Framework unable to communicate with the Disk Management daemon

I'm experiencing problems with the Disk Management daemon on my MBPro Retina running Mountain Lion 10.8.2. I discovered it first when I tried to enable file vault and received the "Framework unable to communicate with the Disk Management daemon" error message.
So I started up Disk Utilities (which started fine) and tried to run Verify Disk Permissions. It failed with the following errror message:
"Verify permissions failed: Framework unable to communicate with the Disk Management daemon"
So I booted in to safe mode and tried Verify Disk Permissions again with the same results.
So I booted in to the recovery partition to run Disk Utilities. It ran fine and the Verify Disk Permissions found some errors which I then fixed.
I re-booted normally but am still experiencing the same behavior.
I have turned off my anti-virus (Sophos) to no effect.
I checked the console and found the following message:
12/6/12 3:27:02.828 PM Disk Utility[157]: *** WARNING: Method userSpaceScaleFactor in class NSWindow is deprecated on 10.7 and later. It should not be used in new applications. Use convertRectToBacking: instead.
Thoughts or suggestions? Thanks!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether your problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

TS3988 This product can not proceed with the activation process, service errors go I want you entered will appear this error I am a Korean. Failed to resolve service center in South Korea Please e-mail response iPad2 32GB Cellular Version

This product can not proceed with the activation process, service errors go I want you entered will appear this error
I am a Korean.
Failed to resolve service center in South Korea
Please e-mail response
iPad2 32GB Cellular Version
<Email Edited by Host>

I'm same. Any Update or News?
Message was edited by: koreasaram

Using my apple ID and password on Mobile Me, I get the message "Verification Failed" . Could not communicate with the server. What am I doing wrong?

Using my Apple ID and password on Mobile Me, I get the message "Verification Failed". Could not communicate with the server" What am I doing wrong?

There is a MobileMe forum. You might have better luck their.

Sqlplus commands from withing the batch files

Hi,
Oracle9.2
need to execute the sqlplus commands from withing the batch files without calling the .sql file separately . How it can be done ?
With Regards

Hi,
I agree with you...but as per your solution, after all you are calling the .sql file while connecting the sqlplus which I know already and I don't want to execute the sql commands like that as shown below.
For example:
for shut down the database and starting it again .sql files will be called as shown below
Note: shutdown.sql file will contain simple database shutdown command.
sqlplus -s "sys/%password%@%tnsname% as sysdba" @D:\shutdown_db.sql
and again for restarting the db i will perform as below
sqlplus -s "sys/%password%@%tnsname% as sysdba" @D:\start_db.sql
But I want to get it executed directly from the DOS batch file.
The thing is I want to execute this both the above database commands from the batch file itself without calling the .sql files separately as shown above.
is it possible, so how it can be done ?
Regards
Edited by: user640001 on Feb 9, 2011 9:53 PM

HT201441 i bought a apple iphone 4s and it came locked from ebay & i cant get into contact with the guy its no possible way ! and im pretty ******

bought a apple iphone 4s and it came locked from ebay & i cant get into touch with the guy its no possible way annd im getting ****** !

File a complaint with eBay to get a refund on the useless iPhone.

The Remote Desktop Management service terminated with the following service-specific error %%4294967295

Got this error after a reboot for the monthly MS hotfixes. After messing around too much, I finally found the problem and though that I would document it here since I have not found the solution anywhere I looked.
This is in a Remote Desktop setup of two RDCB using a SQL DB that is hosted on a third server. The Remote Desktop Management service would fail to start with the "The Remote Desktop Management service terminated with the following service-specific
error: %%4294967295" error because the SQL Server service hosting the database was offline. It had not automatically restarted after the same hotfixes. So I started the SQL server, then was able to get Remote Desktop Management to start on my RDCB without
any delay.
Philippe Carignan

Hi Philippe,
How is everything going on?
Please check below thread for information.
Remote Desktop Management Service, Service-specific
error %%2284126209
Hope it helps!
Thanks,
Dharmesh

While installing adobe creative cloud , getting the following error msg " There seems to be a problem with the download process. Error code:201"

while installing adobe creative cloud , getting the following error msg " There seems to be a problem with the download process. Error code:201"

Creative Cloud Help / Error downloading Creative Cloud applications
http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html

HT4061 i have a iphone 3gs and recently I Erase All Contents and Settings, now my phone is asking me to update to itunes but when I do it comes up with the message...error 10.15, can someone please help?

i have a iphone 3gs and recently I Erase All Contents and Settings, now my phone is asking me to update to itunes but when I do it comes up with the message...error 10.15, can someone please help?

Your headline says iPhone 3GS, but your text says 3G.
iPhone 3G is not compatible with iOS5. 3GS is.

Can someone tell me how to create accounting entries with the account status as error

Hi,
Can someone tell me how to create accounting entries with the
account status as error?
Thanks!!
Danny

It's call fixed/static background, and it is NOT directly support by iweb, you will need post processing either in html or javascript.
Varkgirl (you need to search the previous forum) and I did it since iweb1:
try Safari, and scroll: http://www.geocities.com/[email protected]/Links.html
invisible link? roddy, fishing for info again?

Ical won't sync with yahoo calendar. Get error....There was an unexpected error with the request (domain CalDAVErrorDomain / error 1 / description 'The collection at "/dav/xyx/Inbox/" is not an inbox.').

Hello, I get the below error when I start iCal and it tries to sync with my Yahoo Calendar. Any thoughts?
There was an unexpected error with the request (domain CalDAVErrorDomain / error 1 / description 'The collection at "/dav/xyx/Inbox/" is not an inbox.').

I am having same problem - I've added events to Ical and it's not updating in my Yahoo calendar. Getting this message: There was an unexpected error with the request (domain CalDAVErrorDomain / error 1 / description 'The collection at "/dav/mcarthur_c/Inbox/" is not an inbox.').

While trying to burn a CD of a playlist, the disc was ejected with the message: medium write error. What does this mean?

While trying to burn a CD of a playlist, the disc was ejected with the message "medium write error" . What does this mean and how do I fix it?

I had been getting this all morning and checked other messages from the community. THe one which worked was trying a different brand of disc.
I had been using Verbatim which had copied the music fine off the Real Player on my PC at school, but wouldn't work with I Tunes. Tried a Staples and an Office Depot CD-R , both of which did the job.

Failed to sqlplus into ASM with the notorious ORA-12505 error

Similar Messages

Maybe you are looking for