HT4061 i have a iphone 3gs and recently I Erase All Contents and Settings, now my phone is asking me to update to itunes but when I do it comes up with the message...error 10.15, can someone please help?
i have a iphone 3gs and recently I Erase All Contents and Settings, now my phone is asking me to update to itunes but when I do it comes up with the message...error 10.15, can someone please help?
Your headline says iPhone 3GS, but your text says 3G.
iPhone 3G is not compatible with iOS5. 3GS is.
Similar Messages
-
i just got the macbook air for christmas and i also got the dr dre headphones so i am trying to enable my soundcheck on my iTunes but i cannot figure out how to find where sound check is located can someone please help!!
Go to the iTunes menu > Preferences > Playback.
-
I am recieving the following message when attempting to sign into my iTunes store - An unknown error has occurred. can someone please help me I have reset my password but still unable to log in. help!!
I am recieving the following message when attempting to sign into my iTunes store - An unknown error has occurred. can someone please help me I have reset my password but still unable to log in. help!!
-
I'm trying to update my Iphone Software to the the new IOS 7 but it says there as an uknown error (6). Can someone please help me? Thanks
http://support.apple.com/kb/TS3694
Check the section on
Errors related to third-party security software -
I have been attempting to wipe/erase the iphone 4S I recently purchased...for the past 20 hours....I went to Reset in Settings and clicked on "Erase All Content and Settings"....At that point the phone the screen went dark except for a white circular symbol revolving - indicating something should be happening....
The instructions indicated that, depending on what needed to be erased, the process could take several hours. Even though the device had a Tom Tom application with all the maps of Europe etc (about 2GB) and there were several other apps on the device, it does not seem to me normal that the device would be still clearing into the next day - today!
Can you please help!?
Richard W.Something has gone wrong. Turn your phone off, then force it into recovery mode & restore it:
Press the Sleep/Wake button & Home button at the same time, keep pressing until your phone turns off, then release.
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off. -
I have a big project but when im going to add a new clip with sound and picture in picture its only the sound that works. Can someone please help me?
Also, if you can't get them to work, what is the error message you are getting?
Baron Samedi -
Unfortunately, I keep getting the error "can not connect to iTunes. Code:0" I've tried rebooting, signing out of my apple ID, can someone please help or advise me on what to do? Many thanks, Ryan
hi i had the same problem today when i updated my itunes to latest version. however, i have just found my songs in the 'itunes media' folder. this was accessed through 'my music' then keep clicking through until you find itunes media and all my library songs were in there and i then just added these files to my library and all were restored however, i have lost all my playlists but at least my 700 songs are back. very dissapointed with apple that they have let this happen with their latest update, the previous version was miles better than this one . hope you find them. stevo
-
I have a ipod 1st gen. its frozen and wont back up. comes up with error code 1. can someone please help.
Hi billewen690,
The resource below may help troubleshoot the issue you are having with your iPod touch being unresponsive.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
https://support.apple.com/en-us/HT201412
Try these steps:
Make sure that you have iTunes 12 or later on your computer.
Put your device in recovery mode.
When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
Get more help
If you still need help after trying the steps above, contact Apple Support.
Last Modified: Jan 14, 2015
Hope that helps ...
- Judy -
I have reset my ipad using General > Reset > Erase All Content and Settings. And now it will not boot. All i see on screen is the Apple logo. What do i do?
When you restore, you can restore to factory settings or to a backup. Restoring to factory settings removes everything and takes you back to out of the box status and you start all over again. Restoring from your backup will replace all of your app data, bookmarks, email settings and things like that. You still may need to sync all of your purchased apps and music, photos and so on back to the iPad.
I assume you want to restore from your backup to put all of you data back on the device so connect the iPad to your computer, launch iTunes, right click on the device name on the left side under the devices heading and select restore from backup. After you restore from your backup, make sure that you sync all of your other content with iTunes. -
I am using iPhone 5 and tried to Erase All Contents and Settings but it is just showing an apple sign on the screen and nothing is happening now for about 3 days now. All it does is eat up my battery and still show apple sign after charging! Help!!!!
Hi DaVince Vince,
I'm sorry to hear that you are having issues with your iPhone. I also apologize, I'm a bit unclear what issues you were having that led up to the attempted Erase All, and/or exactly what behavior you are seeing now (restarting, not responding at all, etc). If you are seeing an Apple Logo screen and your iPhone does not appear to be starting correctly, you may find the following articles helpful:
If your iOS device restarts, displays the Apple logo, or powers off while you're using it - Apple Support
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Regards,
- Brenden -
I try to login to Creative cloud, but it just keep on "loging in" with the loading circle, it never stops.. please help
i have tried to reinstall it, disabled the UAD or what its called.. i dont know what to do with it to be honestMac Spinning Wheel https://forums.adobe.com/message/5470608
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html -
I am trying to download Skype to my ipod (my friend gave me his old ipod touch, which is about 1-2 years old, according to the year 2014) And when I tried to install it, it said that I have to agree to the terms of use. So I go onto my computer and review the terms of use there on my email. I could NOT find the "agree" button. Please, can someone help me?
The button would be on your iPod version of Skype, not the computer version. They are not the same.
-
Spry oh Spry. The old IE8 debate. Can someone please help
Yes, I am one of the people who can't get their horisontal menu to work in IE8. I've noticed there is a fix in the code for IE6 but this doesn't seem to help the issue.
Which is, that when hovering over the menu the submenu will display for a second and then disapear. I've noticed the same happening to other folks here as well.
Please can anyone have a look at why this could be.
http://southpacifictravellers.co.nz/Menu_102012/Menu1_H.html
Really appreciate it!I've been known to do that to people, sorry Gramps.
I didn't create the site just updating it.
Ok, I've created a test file which is the full document. This is what the menu should look like but my boss is not happy with it not working on IE8, which is what she uses, so we've decided to keep the old menu up for now. Hence the test file below.
http://southpacifictravellers.co.nz/default_102012.asp
On this, there is an included called pagetop1-a.htm http://southpacifictravellers.co.nz/includes/pagetop1-a.htm (but you don't see the menu on this for some reason with the file on its own.
And this is the menu file url http://southpacifictravellers.co.nz/includes/Menu1_H.html and here is its code:
<link href="../Spry-UI-1.7/css/Menu/basic/SpryMenuBasic.css" rel="stylesheet" type="text/css" />
<script src="../Spry-UI-1.7/includes/SpryDOMUtils.js" type="text/javascript"></script>
<script src="../Spry-UI-1.7/includes/SpryDOMEffects.js" type="text/javascript"></script>
<script src="../Spry-UI-1.7/includes/SpryWidget.js" type="text/javascript"></script>
<script src="../Spry-UI-1.7/includes/SpryMenu.js" type="text/javascript"></script>
<script src="../Spry-UI-1.7/includes/plugins/MenuBar2/SpryMenuBarKeyNavigationPlugin.js" type="text/javascript"></script>
<script src="../Spry-UI-1.7/includes/plugins/MenuBar2/SpryMenuBarIEWorkaroundsPlugin.js" type="text/javascript"></script>
<style type="text/css">
/* BeginOAWidget_Instance_2141544: #MenuBar1 */
/* Settable values for skinning a Basic menu via presets. If presets are not sufficient, most skinning should be done in
these rules, with the exception of the images used for down or right pointing arrows, which are in the file SpryMenuBasic.css
These assume the following widget classes for menu layout (set in a preset)
.MenuBar - Applies to all menubars - default is horizontal bar, all submenus are vertical - 2nd level subs and beyond are pull-right.
.MenuBarVertical - vertical main bar; all submenus are pull-right.
You can also pass in extra classnames to set your desired top level menu bar layout. Normally, these are set by using a preset.
They only apply to horizontal menu bars:
MenuBarLeftShrink - The menu bar will be horizontally 'shrinkwrapped' to be just large enough to hold its items, and left aligned
MenuBarRightShrink - Just like MenuBarLeftShrink, but right aligned
MenuBarFixedLeft - Fixed at a specified width set in the rule '.MenuBarFixedLeft', and left aligned.
MenuBarFixedCentered - - Fixed at a specified width set in the rule '.MenuBarFixedCentered',
and centered in its parent container.
MenuBarFullwidth - Grows to fill its parent container width.
In general, all rules specified in this file are prefixed by #MenuBar1 so they only apply to instances of the widget inserted along
with the rules. This permits use of multiple MenuBarBasic widgets on the same page with different layouts. Because of IE6 limitations,
there are a few rules where this was not possible. Those rules are so noted in comments.
#MenuBar1 {
background-color:#0073b2;
font-family: Verdana, Geneva, sans-serif; /* Specify fonts on on MenuBar and subMenu MenuItemContainer, so MenuItemContainer,
MenuItem, and MenuItemLabel
at a given level all use same definition for ems.
Note that this means the size is also inherited to child submenus,
so use caution in using relative sizes other than
100% on submenu fonts. */
/*font-weight: bold;*/
font-size: 12px;
font-style: normal;
padding:0;
border-color: #ffffff #ffffff #ffffff #ffffff;
border-width:0px;
border-style: none none none none;
/* Caution: because ID+class selectors do not work properly in IE6, but we want to restrict these rules to just this
widget instance, we have used string-concatenated classnames for our selectors for the layout type of the menubar
in this section. These have very low specificity, so be careful not to accidentally override them. */
.MenuBar br { /* using just a class so it has same specificity as the ".MenuBar1FixedCentered br" rule bleow */
display:none;
.MenuBar1LeftShrink {
float: left; /* shrink to content, as well as float the MenuBar */
width: auto;
.MenuBar1RightShrink {
float: right; /* shrink to content, as well as float the MenuBar */
width: auto;
.MenuBar1FixedLeft {
float: left;
width: 0px;
.MenuBar1FixedCentered {
float: none;
width: 0px;
margin-left:auto;
margin-right:auto;
.MenuBar1FixedCentered br {
clear:both;
display:block;
.MenuBar1FixedCentered .SubMenu br {
display:none;
.MenuBar1Fullwidth {
float: left;
width: 100%;
/* Top level menubar items - these actually apply to all items, and get overridden for 1st or successive level submenus */
#MenuBar1 .MenuItemContainer {
padding: 0px 0px 0px 0px;
margin: 0; /* Zero out margin on the item containers. The MenuItem is the active hover area.
For most items, we have to do top or bottom padding or borders only on the MenuItem
or a child so we keep the entire submenu tiled with items.
Setting this to 0 avoids "dead spots" for hovering. */
#MenuBar1 .MenuItem {
padding: 0px 0px 0px 0px;
background-color:#0073b2;
border-width:1px;
border-color: #cccccc #ffffff #cccccc #ffffff;
border-style: none none none solid;
#MenuBar1 .MenuItemFirst {
border-style: none none none none;
#MenuBar1 .MenuItemLast {
border-style: none none none solid;
#MenuBar1 .MenuItem .MenuItemLabel{
text-align:center;
line-height:1.4em;
color:#ffffff;
background-color:#0073b2;
padding: 2px 11px 2px 11px;
width: 0px;
width: inherit;
.SpryIsIE6 #MenuBar1 .MenuItem .MenuItemLabel{
width:1em; /* Equivalent to min-width in modern browsers */
/* First level submenu items */
#MenuBar1 .SubMenu .MenuItem {
font-family: Verdana, Geneva, sans-serif;
font-weight: normal;
font-size: 12px;
font-style: normal;
background-color:#339933;
padding:0px 2px 0px 0px;
border-width:0px;
border-color: #cccccc #cccccc #cccccc #cccccc;
/* Border styles are overriden by first and last items */
border-style: none none none none;
#MenuBar1 .SubMenu .MenuItemFirst {
border-style: none none none none;
#MenuBar1 .SubMenu .MenuItemFirst .MenuItemLabel{
padding-top: 6px;
#MenuBar1 .SubMenu .MenuItemLast {
border-style: none none none none;
#MenuBar1 .SubMenu .MenuItemLast .MenuItemLabel{
padding-bottom: 6px;
#MenuBar1 .SubMenu .MenuItem .MenuItemLabel{
text-align:left;
line-height:1em;
background-color:#339933;
color:#ffffff;
padding: 6px 12px 6px 5px;
width: 7em;
width:auto;
/* Hover states for containers, items and labels */
#MenuBar1 .MenuItemHover {
background-color: transparent;
border-color: #cccccc #cccccc #cccccc #cccccc;
#MenuBar1 .MenuItemWithSubMenu.MenuItemHover .MenuItemLabel{
background-color: #005888; /* consider exposing this prop separately*/
color: #ffffff;
#MenuBar1 .MenuItemHover .MenuItemLabel{
background-color: #005888;
color: #ffffff;
#MenuBar1 .SubMenu .MenuItemHover {
background-color: #33cc33;
border-color: #cccccc #cccccc #cccccc #cccccc;
#MenuBar1 .SubMenu .MenuItemHover .MenuItemLabel{
background-color: #33cc33;
color: #ffffff;
/* Submenu properties -- First level of submenus */
#MenuBar1 .SubMenuVisible {
background-color: #339933;
min-width:100%; /* This keeps the menu from being skinnier than the parent MenuItemContainer - nice to have but not available on ie6 */
border-color: #ffffff #ffffff #ffffff #ffffff;
border-width:0px;
border-style: solid solid solid solid;
#MenuBar1.MenuBar .SubMenuVisible {/* For Horizontal menubar only */
top: 100%; /* 100% is at the bottom of parent menuItemContainer */
left:0px; /* 'left' may need tuning depending upon borders or padding applied to menubar MenuItemContainer or MenuItem,
and your personal taste.
0px will left align the dropdown with the content area of the MenuItemContainer. Assuming you keep the margins 0
on MenuItemContainer and MenuItem on the parent
menubar, making this equal the sum of the MenuItemContainer & MenuItem padding-left will align
the dropdown with the left of the menu item label.*/
z-index:10;
#MenuBar1.MenuBarVertical .SubMenuVisible {
top: 0px;
left:100%;
min-width:0px; /* Do not neeed to match width to parent MenuItemContainer - items will prevent total collapse */
/* Submenu properties -- Second level submenu and beyond - these are visible descendents of .MenuLevel1 */
#MenuBar1 .MenuLevel1 .SubMenuVisible {
background-color: #339933;
min-width:0px; /* Do not neeed to match width to parent MenuItemContainer - items will prevent total collapse*/
top: 0px; /* If desired, you can move this down a smidge to separate top item''s submenu from menubar -
that is really only needed for submenu on first item of MenuLevel1, or you can make it negative to make submenu more
vertically 'centered' on its invoking item */
left:100%; /* If you want to shift the submenu left to partially cover its invoking item, you can add a margin-left with a
negative value to this rule. Alternatively, if you use fixed-width items, you can change this left value
to use px or ems to get the offset you want. */
/* IE6 rules - you can delete these if you do not want to support IE6 */
/* A note about multiple classes in IE6.
* Some of the rules above use multiple class names on an element for selection, such as "hover" (MenuItemHover) and "has a subMenu" (MenuItemWithSubMenu),
* giving the selector '.MenuItemWithSubMenu.MenuItemHover'.
* Unfortunately IE6 does not support using mutiple classnames in a selector for an element. For a selector such as '.foo.bar.baz', IE6 ignores
* all but the final classname (here, '.baz'), and sets the specificity accordingly, counting just one of those classs as significant. To get around this
* problem, we use the plugin in SpryMenuBarIEWorkaroundsPlugin.js to generate compound classnames for IE6, such as 'MenuItemWithSubMenuHover'.
* Since there are a lot of these needed, the plugin does not generate the extra classes for modern browsers, and we use the CSS2 style mutltiple class
* syntax for that. Since IE6 both applies rules where
* it should not, and gets the specificity wrong too, we have to order rules carefully, so the rule misapplied in IE6 can be overridden.
* So, we put the multiple class rule first. IE6 will mistakenly apply this rule. We follow this with the single-class rule that it would
* mistakenly override, making sure the misinterpreted IE6 specificity is the same as the single-class selector, so the latter wins.
* We then create a copy of the multiple class rule, adding a '.SpryIsIE6' class as context, and making sure the specificity for
* the selector is high enough to beat the single-class rule in the "both classes match" case. We place the IE6 rule at the end of the
* css style block to make it easy to delete if you want to drop IE6 support.
* If you decide you do not need IE6 support, you can get rid of these, as well as the inclusion of the SpryMenuBarIEWorkaroundsPlugin.js script.
* The 'SpryIsIE6' class is placed on the HTML element by the script in SpryMenuBarIEWorkaroundsPlugin.js if the browser is Internet Explorer 6. This avoids the necessity of IE conditional comments for these rules.
.SpryIsIE6 #MenuBar1 .MenuBarView .MenuItemWithSubMenuHover .MenuItemLabel /* IE6 selector */{
background-color: #005888; /* consider exposing this prop separately*/
color: #ffffff;
.SpryIsIE6 #MenuBar1 .MenuBarView .SubMenu .MenuItemWithSubMenuHover .MenuItemLabel/* IE6 selector */{
background-color: #33cc33; /* consider exposing this prop separately*/
color: #ffffff;
.SpryIsIE6 #MenuBar1 .SubMenu .SubMenu /* IE6 selector */{
margin-left: -0px; /* Compensates for at least part of an IE6 "double padding" version of the "double margin" bug */
/* EndOAWidget_Instance_2141544 */
</style>
<script type="text/xml">
<!--
<oa:widgets>
<oa:widget wid="2141544" binding="#MenuBar1" />
<oa:widget wid="2141544" binding="#MenuBar1_2" />
<oa:widget wid="2141544" binding="#MenuBar1_3" />
</oa:widgets>
-->
</script>
<style type="text/css">
/* BeginOAWidget_Instance_2141544: #MenuBar1_2 */
/* Settable values for skinning a Basic menu via presets. If presets are not sufficient, most skinning should be done in
these rules, with the exception of the images used for down or right pointing arrows, which are in the file SpryMenuBasic.css
These assume the following widget classes for menu layout (set in a preset)
.MenuBar - Applies to all menubars - default is horizontal bar, all submenus are vertical - 2nd level subs and beyond are pull-right.
.MenuBarVertical - vertical main bar; all submenus are pull-right.
You can also pass in extra classnames to set your desired top level menu bar layout. Normally, these are set by using a preset.
They only apply to horizontal menu bars:
MenuBarLeftShrink - The menu bar will be horizontally 'shrinkwrapped' to be just large enough to hold its items, and left aligned
MenuBarRightShrink - Just like MenuBarLeftShrink, but right aligned
MenuBarFixedLeft - Fixed at a specified width set in the rule '.MenuBarFixedLeft', and left aligned.
MenuBarFixedCentered - - Fixed at a specified width set in the rule '.MenuBarFixedCentered',
and centered in its parent container.
MenuBarFullwidth - Grows to fill its parent container width.
In general, all rules specified in this file are prefixed by #MenuBar1_2 so they only apply to instances of the widget inserted along
with the rules. This permits use of multiple MenuBarBasic widgets on the same page with different layouts. Because of IE6 limitations,
there are a few rules where this was not possible. Those rules are so noted in comments.
#MenuBar1_2 {
background-color:#0073b2;
font-family: Verdana, Geneva, sans-serif; /* Specify fonts on on MenuBar and subMenu MenuItemContainer, so MenuItemContainer,
MenuItem, and MenuItemLabel
at a given level all use same definition for ems.
Note that this means the size is also inherited to child submenus,
so use caution in using relative sizes other than
100% on submenu fonts.
/*font-weight: bold;*/
font-size: 12px;
font-style: normal;
padding:0;
border-color: #ffffff #ffffff #ffffff #ffffff;
border-width:0px;
border-style: none none none none;
/* Caution: because ID+class selectors do not work properly in IE6, but we want to restrict these rules to just this
widget instance, we have used string-concatenated classnames for our selectors for the layout type of the menubar
in this section. These have very low specificity, so be careful not to accidentally override them. */
.MenuBar br { /* using just a class so it has same specificity as the ".MenuBar1_2FixedCentered br" rule bleow */
display:none;
.MenuBar1_2LeftShrink {
float: left; /* shrink to content, as well as float the MenuBar */
width: auto;
.MenuBar1_2RightShrink {
float: right; /* shrink to content, as well as float the MenuBar */
width: auto;
.MenuBar1_2FixedLeft {
float: left;
width: 0px;
.MenuBar1_2FixedCentered {
float: none;
width: 0px;
margin-left:auto;
margin-right:auto;
.MenuBar1_2FixedCentered br {
clear:both;
display:block;
.MenuBar1_2FixedCentered .SubMenu br {
display:none;
.MenuBar1_2Fullwidth {
float: left;
width: 100%;
/* Top level menubar items - these actually apply to all items, and get overridden for 1st or successive level submenus */
#MenuBar1_2 .MenuItemContainer {
padding: 0px 0px 0px 0px;
margin: 0; /* Zero out margin on the item containers. The MenuItem is the active hover area.
For most items, we have to do top or bottom padding or borders only on the MenuItem
or a child so we keep the entire submenu tiled with items.
Setting this to 0 avoids "dead spots" for hovering. */
#MenuBar1_2 .MenuItem {
padding: 0px 0px 0px 0px;
background-color:#0073b2;
border-width:1px;
border-color: #cccccc #ffffff #cccccc #ffffff;
border-style: none none none solid;
#MenuBar1_2 .MenuItemFirst {
border-style: none none none none;
#MenuBar1_2 .MenuItemLast {
border-style: none none none solid;
#MenuBar1_2 .MenuItem .MenuItemLabel{
text-align:center;
line-height:1.4em;
color:#ffffff;
background-color:#0073b2;
padding: 2px 14px 2px 14px;
width: 0px;
width:auto;
.SpryIsIE6 #MenuBar1_2 .MenuItem .MenuItemLabel{
width:1em; /* Equivalent to min-width in modern browsers */
/* First level submenu items */
#MenuBar1_2 .SubMenu .MenuItem {
font-family: Verdana, Geneva, sans-serif;
font-weight: normal;
font-size: 12px;
font-style: normal;
background-color:#339933;
padding:0px 2px 0px 0px;
border-width:0px;
border-color: #cccccc #cccccc #cccccc #cccccc;
/* Border styles are overriden by first and last items */
border-style: none none none none;
#MenuBar1_2 .SubMenu .MenuItemFirst {
border-style: none none none none;
#MenuBar1_2 .SubMenu .MenuItemFirst .MenuItemLabel{
padding-top: 6px;
#MenuBar1_2 .SubMenu .MenuItemLast {
border-style: none none none none;
#MenuBar1_2 .SubMenu .MenuItemLast .MenuItemLabel{
padding-bottom: 6px;
#MenuBar1_2 .SubMenu .MenuItem .MenuItemLabel{
text-align:left;
line-height:1em;
background-color:#339933;
color:#ffffff;
padding: 6px 12px 6px 5px;
width: 7em;
width:auto;
/* Hover states for containers, items and labels */
#MenuBar1_2 .MenuItemHover {
background-color: transparent;
border-color: #cccccc #cccccc #cccccc #cccccc;
#MenuBar1_2 .MenuItemWithSubMenu.MenuItemHover .MenuItemLabel{
background-color: #005888; /* consider exposing this prop separately*/
color: #ffffff;
#MenuBar1_2 .MenuItemHover .MenuItemLabel{
background-color: #005888;
color: #ffffff;
#MenuBar1_2 .SubMenu .MenuItemHover {
background-color: #33cc33;
border-color: #cccccc #cccccc #cccccc #cccccc;
#MenuBar1_2 .SubMenu .MenuItemHover .MenuItemLabel{
background-color: #33cc33;
color: #ffffff;
/* Submenu properties -- First level of submenus */
#MenuBar1_2 .SubMenuVisible {
background-color: #339933;
min-width:100%; /* This keeps the menu from being skinnier than the parent MenuItemContainer - nice to have but not available on ie6 */
border-color: #ffffff #ffffff #ffffff #ffffff;
border-width:0px;
border-style: solid solid solid solid;
#MenuBar1_2.MenuBar .SubMenuVisible {/* For Horizontal menubar only */
top: 100%; /* 100% is at the bottom of parent menuItemContainer */
left:0px; /* 'left' may need tuning depending upon borders or padding applied to menubar MenuItemContainer or MenuItem,
and your personal taste.
0px will left align the dropdown with the content area of the MenuItemContainer. Assuming you keep the margins 0
on MenuItemContainer and MenuItem on the parent
menubar, making this equal the sum of the MenuItemContainer & MenuItem padding-left will align
the dropdown with the left of the menu item label.*/
z-index:10;
#MenuBar1_2.MenuBarVertical .SubMenuVisible {
top: 0px;
left:100%;
min-width:0px; /* Do not neeed to match width to parent MenuItemContainer - items will prevent total collapse */
/* Submenu properties -- Second level submenu and beyond - these are visible descendents of .MenuLevel1 */
#MenuBar1_2 .MenuLevel1 .SubMenuVisible {
background-color: #339933;
min-width:0px; /* Do not neeed to match width to parent MenuItemContainer - items will prevent total collapse*/
top: 0px; /* If desired, you can move this down a smidge to separate top item''s submenu from menubar -
that is really only needed for submenu on first item of MenuLevel1, or you can make it negative to make submenu more
vertically 'centered' on its invoking item */
left:100%; /* If you want to shift the submenu left to partially cover its invoking item, you can add a margin-left with a
negative value to this rule. Alternatively, if you use fixed-width items, you can change this left value
to use px or ems to get the offset you want. */
/* IE6 rules - you can delete these if you do not want to support IE6 */
/* A note about multiple classes in IE6.
* Some of the rules above use multiple class names on an element for selection, such as "hover" (MenuItemHover) and "has a subMenu" (MenuItemWithSubMenu),
* giving the selector '.MenuItemWithSubMenu.MenuItemHover'.
* Unfortunately IE6 does not support using mutiple classnames in a selector for an element. For a selector such as '.foo.bar.baz', IE6 ignores
* all but the final classname (here, '.baz'), and sets the specificity accordingly, counting just one of those classs as significant. To get around this
* problem, we use the plugin in SpryMenuBarIEWorkaroundsPlugin.js to generate compound classnames for IE6, such as 'MenuItemWithSubMenuHover'.
* Since there are a lot of these needed, the plugin does not generate the extra classes for modern browsers, and we use the CSS2 style mutltiple class
* syntax for that. Since IE6 both applies rules where
* it should not, and gets the specificity wrong too, we have to order rules carefully, so the rule misapplied in IE6 can be overridden.
* So, we put the multiple class rule first. IE6 will mistakenly apply this rule. We follow this with the single-class rule that it would
* mistakenly override, making sure the misinterpreted IE6 specificity is the same as the single-class selector, so the latter wins.
* We then create a copy of the multiple class rule, adding a '.SpryIsIE6' class as context, and making sure the specificity for
* the selector is high enough to beat the single-class rule in the "both classes match" case. We place the IE6 rule at the end of the
* css style block to make it easy to delete if you want to drop IE6 support.
* If you decide you do not need IE6 support, you can get rid of these, as well as the inclusion of the SpryMenuBarIEWorkaroundsPlugin.js script.
* The 'SpryIsIE6' class is placed on the HTML element by the script in SpryMenuBarIEWorkaroundsPlugin.js if the browser is Internet Explorer 6. This avoids the necessity of IE conditional comments for these rules.
.SpryIsIE6 #MenuBar1_2 .MenuBarView .MenuItemWithSubMenuHover .MenuItemLabel /* IE6 selector */{
background-color: #005888; /* consider exposing this prop separately*/
color: #ffffff;
.SpryIsIE6 #MenuBar1_2 .MenuBarView .SubMenu .MenuItemWithSubMenuHover .MenuItemLabel/* IE6 selector */{
background-color: #33cc33; /* consider exposing this prop separately*/
color: #ffffff;
.SpryIsIE6 #MenuBar1_2 .SubMenu .SubMenu /* IE6 selector */{
margin-left: -0px; /* Compensates for at least part of an IE6 "double padding" version of the "double margin" bug */
/* EndOAWidget_Instance_2141544 */
</style>
<style type="text/css">
/* BeginOAWidget_Instance_2141544: #MenuBar1_3 */
/* Settable values for skinning a Basic menu via presets. If presets are not sufficient, most skinning should be done in
these rules, with the exception of the images used for down or right pointing arrows, which are in the file SpryMenuBasic.css
These assume the following widget classes for menu layout (set in a preset)
.MenuBar - Applies to all menubars - default is horizontal bar, all submenus are vertical - 2nd level subs and beyond are pull-right.
.MenuBarVertical - vertical main bar; all submenus are pull-right.
You can also pass in extra classnames to set your desired top level menu bar layout. Normally, these are set by using a preset.
They only apply to horizontal menu bars:
MenuBarLeftShrink - The menu bar will be horizontally 'shrinkwrapped' to be just large enough to hold its items, and left aligned
MenuBarRightShrink - Just like MenuBarLeftShrink, but right aligned
MenuBarFixedLeft - Fixed at a specified width set in the rule '.MenuBarFixedLeft', and left aligned.
MenuBarFixedCentered - - Fixed at a specified width set in the rule '.MenuBarFixedCentered',
and centered in its parent container.
MenuBarFullwidth - Grows to fill its parent container width.
In general, all rules specified in this file are prefixed by #MenuBar1_3 so they only apply to instances of the widget inserted along
with the rules. This permits use of multiple MenuBarBasic widgets on the same page with different layouts. Because of IE6 limitations,
there are a few rules where this was not possible. Those rules are so noted in comments.
#MenuBar1_3 {
background-color: #0073b2;
font-family: Verdana, Geneva, sans-serif; /* Specify fonts on on MenuBar and subMenu MenuItemContainer, so MenuItemContainer,
MenuItem, and MenuItemLabel
at a given level all use same definition for ems.
Note that this means the size is also inherited to child submenus,
so use caution in using relative sizes other than
100% on submenu fonts. */
/*font-weight: bold;*/
font-size: 12px;
font-style: normal;
padding: 0;
border-color: #ffffff #ffffff #ffffff #ffffff;
border-width: 0px;
border-style: none none none none;
text-align: center;
/* Caution: because ID+class selectors do not work properly in IE6, but we want to restrict these rules to just this
widget instance, we have used string-concatenated classnames for our selectors for the layout type of the menubar
in this section. These have very low specificity, so be careful not to accidentally override them. */
.MenuBar br { /* using just a class so it has same specificity as the ".MenuBar1_3FixedCentered br" rule bleow */
display:none;
.MenuBar1_3LeftShrink {
float: left; /* shrink to content, as well as float the MenuBar */
width: auto;
.MenuBar1_3RightShrink {
float: right; /* shrink to content, as well as float the MenuBar */
width: auto;
.MenuBar1_3FixedLeft {
float: left;
width: 0px;
.MenuBar1_3FixedCentered {
float: none;
width: 0px;
margin-left:auto;
margin-right:auto;
.MenuBar1_3FixedCentered br {
clear:both;
display:block;
.MenuBar1_3FixedCentered .SubMenu br {
display:none;
.MenuBar1_3Fullwidth {
float: left;
width: 100%;
/* Top level menubar items - these actually apply to all items, and get overridden for 1st or successive level submenus */
#MenuBar1_3 .MenuItemContainer {
padding: 0px 0px 0px 0px;
margin: 0; /* Zero out margin on the item containers. The MenuItem is the active hover area.
For most items, we have to do top or bottom padding or borders only on the MenuItem
or a child so we keep the entire submenu tiled with items.
Setting this to 0 avoids "dead spots" for hovering. */
#MenuBar1_3 .MenuItem {
padding: 0px 0px 0px 0px;
background-color:#0073b2;
border-width:1px;
border-color: #cccccc #ffffff #cccccc #ffffff;
border-style: none none none solid;
#MenuBar1_3 .MenuItemFirst {
border-style: none none none none;
#MenuBar1_3 .MenuItemLast {
border-style: none none none solid;
#MenuBar1_3 .MenuItem .MenuItemLabel{
text-align:center;
line-height:1.4em;
color:#ffffff;
background-color:#0073b2;
padding: 2px 14px 2px 14px;
width: 0px;
width:auto;
.SpryIsIE6 #MenuBar1_3 .MenuItem .MenuItemLabel{
width:1em; /* Equivalent to min-width in modern browsers */
/* First level submenu items */
#MenuBar1_3 .SubMenu .MenuItem {
font-family: Verdana, Geneva, sans-serif;
font-weight: normal;
font-size: 12px;
font-style: normal;
background-color:#339933;
padding:0px 2px 0px 0px;
border-width:0px;
border-color: #cccccc #cccccc #cccccc #cccccc;
/* Border styles are overriden by first and last items */
border-style: none none none none;
#MenuBar1_3 .SubMenu .MenuItemFirst {
border-style: none none none none;
#MenuBar1_3 .SubMenu .MenuItemFirst .MenuItemLabel{
padding-top: 6px;
#MenuBar1_3 .SubMenu .MenuItemLast {
border-style: none none none none;
#MenuBar1_3 .SubMenu .MenuItemLast .MenuItemLabel{
padding-bottom: 6px;
#MenuBar1_3 .SubMenu .MenuItem .MenuItemLabel{
text-align:left;
line-height:1em;
background-color:#339933;
color:#ffffff;
padding: 6px 12px 6px 5px;
width: 7em;
width:auto;
/* Hover states for containers, items and labels */
#MenuBar1_3 .MenuItemHover {
background-color: transparent;
border-color: #cccccc #cccccc #cccccc #cccccc;
#MenuBar1_3 .MenuItemWithSubMenu.MenuItemHover .MenuItemLabel{
background-color: #005888; /* consider exposing this prop separately*/
color: #ffffff;
#MenuBar1_3 .MenuItemHover .MenuItemLabel{
background-color: #005888;
color: #ffffff;
#MenuBar1_3 .SubMenu .MenuItemHover {
background-color: #33cc33;
border-color: #cccccc #cccccc #cccccc #cccccc;
#MenuBar1_3 .SubMenu .MenuItemHover .MenuItemLabel{
background-color: #33cc33;
color: #ffffff;
/* Submenu properties -- First level of submenus */
#MenuBar1_3 .SubMenuVisible {
background-color: #339933;
min-width:100%; /* This keeps the menu from being skinnier than the parent MenuItemContainer - nice to have but not available on ie6 */
border-color: #ffffff #ffffff #ffffff #ffffff;
border-width:0px;
border-style: solid solid solid solid;
#MenuBar1_3.MenuBar .SubMenuVisible {/* For Horizontal menubar only */
top: 100%; /* 100% is at the bottom of parent menuItemContainer */
left:0px; /* 'left' may need tuning depending upon borders or padding applied to menubar MenuItemContainer or MenuItem,
and your personal taste.
0px will left align the dropdown with the content area of the MenuItemContainer. Assuming you keep the margins 0
on MenuItemContainer and MenuItem on the parent
menubar, making this equal the sum of the MenuItemContainer & MenuItem padding-left will align
the dropdown with the left of the menu item label.*/
z-index:10;
#MenuBar1_3.MenuBarVertical .SubMenuVisible {
top: 0px;
left:100%;
min-width:0px; /* Do not neeed to match width to parent MenuItemContainer - items will prevent total collapse */
/* Submenu properties -- Second level submenu and beyond - these are visible descendents of .MenuLevel1 */
#MenuBar1_3 .MenuLevel1 .SubMenuVisible {
background-color: #339933;
min-width:0px; /* Do not neeed to match width to parent MenuItemContainer - items will prevent total collapse*/
top: 0px; /* If desired, you can move this down a smidge to separate top item''s submenu from menubar -
that is really only needed for submenu on first item of MenuLevel1, or you can make it negative to make submenu more
vertically 'centered' on its invoking item */
left:100%; /* If you want to shift the submenu left to partially cover its invoking item, you can add a margin-left with a
negative value to this rule. Alternatively, if you use fixed-width items, you can change this left value
to use px or ems to get the offset you want. */
/* IE6 rules - you can delete these if you do not want to support IE6 */
/* A note about multiple classes in IE6.
* Some of the rules above use multiple class names on an element for selection, such as "hover" (MenuItemHover) and "has a subMenu" (MenuItemWithSubMenu),
* giving the selector '.MenuItemWithSubMenu.MenuItemHover'.
* Unfortunately IE6 does not support using mutiple classnames in a selector for an element. For a selector such as '.foo.bar.baz', IE6 ignores
* all but the final classname (here, '.baz'), and sets the specificity accordingly, counting just one of those classs as significant. To get around this
* problem, we use the plugin in SpryMenuBarIEWorkaroundsPlugin.js to generate compound classnames for IE6, such as 'MenuItemWithSubMenuHover'.
* Since there are a lot of these needed, the plugin does not generate the extra classes for modern browsers, and we use the CSS2 style mutltiple class
* syntax for that. Since IE6 both applies rules where
* it should not, and gets the specificity wrong too, we have to order rules carefully, so the rule misapplied in IE6 can be overridden.
* So, we put the multiple class rule first. IE6 will mistakenly apply this rule. We follow this with the single-class rule that it would
* mistakenly override, making sure the misinterpreted IE6 specificity is the same as the single-class selector, so the latter wins.
* We then create a copy of the multiple class rule, adding a '.SpryIsIE6' class as context, and making sure the specificity for
* the selector is high enough to beat the single-class rule in the "both classes match" case. We place the IE6 rule at the end of the
* css style block to make it easy to delete if you want to drop IE6 support.
* If you decide you do not need IE6 support, you can get rid of these, as well as the inclusion of the SpryMenuBarIEWorkaroundsPlugin.js script.
* The 'SpryIsIE6' class is placed on the HTML element by the script in SpryMenuBarIEWorkaroundsPlugin.js if the browser is Internet Explorer 6. This avoids the necessity of IE conditional comments for these rules.
.SpryIsIE6 #MenuBar1_3 .MenuBarView .MenuItemWithSubMenuHover .MenuItemLabel /* IE6 selector */{
background-color: #005888; /* consider exposing this prop separately*/
color: #ffffff;
.SpryIsIE6 #MenuBar1_3 .MenuBarView .SubMenu .MenuItemWithSubMenuHover .MenuItemLabel/* IE6 selector */{
background-color: #33cc33; /* consider exposing this prop separately*/
color: #ffffff;
.SpryIsIE6 #MenuBar1_3 .SubMenu .SubMenu /* IE6 selector */{
margin-left: -0px; /* Compensates for at least part of an IE6 "double padding" version of the "double margin" bug */
/* EndOAWidget_Instance_2141544 */
</style>
<table width="760" border="0" cellspacing="0" cellpadding="0">
<tr bgcolor="#0073B2">
<td align="center"><ul id="MenuBar1">
<li><a href="default.asp">Home</a> </li>
<li><a href="independent.asp" >Independent Holidays </a>
<ul>
<li><a href="indep-info.asp">An Introduction to our Trips</a></li>
<li><a href="shortbreaks.asp">Nature Break Holidays</a></li>
<li><a href="touring.asp">Discovery Holidays</a></li>
<li><a href="intrepidholidays.asp" >Intrepid Holidays</a>
<ul>
<li><a href="ihgourmet.asp">Gourmet Wine </a></li>
<li><a href="ihculture.asp">Culture & Heritage </a></li>
<li><a href="ihwalking.asp">Walking Holidays </a></li>
<li><a href="ihactive.asp">Active Outdoors </a></li>
<li><a href="ihwildlife.asp">Wildlife Encounters </a></li>
</ul>
</li>
<li><a href="selector.asp">Destination & Activity Selector</a></li>
<li><a href="https://www.southpacifictravellers.co.nz/host/secure/bookingform-sb.asp">Booking Form - Nature Breaks</a></li>
<li><a href="https://www.southpacifictravellers.co.nz/host/secure/bookingform-th.asp">Booking Form - Discovery Holidays</a></li>
<li><a href="https://www.southpacifictravellers.co.nz/host/secure/enquiryform.asp">Quick Email Enquiry Form</a></li>
</ul>
</li>
<li><a href="selfdrive.asp" >Self Drive</a>
<ul>
<li><a href="selfdrivefeatures.asp">Rental Cars Used in Our Tours </a></li>
<li><a href="motorhome.asp" >Motorhomes and Campervans</a>
<ul>
<li><a href="motorhome-united.asp">United Campervans</a></li>
<li><a href="motorhome-maui.asp">Pacific Horizon</a></li>
</ul>
</li>
<li><a href="motorcycles-info.asp">Motorcycle Touring</a></li>
<li><a href="kiwicombopass.asp">Kiwi Combo Pass</a></li>
</ul>
</li>
<li><a href="travelpasses.asp" >Travel Passes</a>
<ul>
<li><a href="kiwicombopass.asp">Kiwi Combo Pass</a></li>
</ul>
</li>
<li><a href="escortedcoachtours.asp" >Escorted Coach Tours</a>
<ul>
<li><a href="premiumcoachfeatures.asp"><strong><font color="#FFCC00">Premium Coach Tours Features</font></strong></a> </li>
<li><a href="#" > Premium Full New Zealand Tours</a>
<ul>
<li><a href="newzealandadventure.asp">18 day Best of New Zealand</a></li>
<li><a href="newzealandencounter.asp">18 day Wonders of New Zealand</a></li>
<li><a href="newzealandhighlights.asp">15 day New Zealand Splendour</a></li>
<li><a href="newzealandpanorama.asp">15 day New Zealand Experience</a></li>
<li><a href="newzealandtaste8.asp">10 day Contrasts of New Zealand</a></li>
</ul>
</li>
<li><a href="#" > Premium South Island Tours</a>
<ul>
<li><a href="southernexplorer10.asp">10 day Southern Panorama </a></li>
<li><a href="southernexperience10.asp">10 day Southern Spectacular </a></li>
<li><a href="southernwanderer7.asp">7 day Southern Wanderer </a></li>
</ul>
</li>
<li><a href="#" > Premium North Island Tours</a>
<ul>
<li><a href="northernexperience8.asp">8 day Northern Discovery</a></li>
</ul>
</li>
<li><a href="luxfeatures.asp"><strong><font color="#FFCC00">Superior Coach Holidays Features</font></strong></a> </li>
<li><a href="luxsi.asp"> Ultimate NZ Small Group</a></li>
<li><a href="#" > Superior New Zealand Tours</a>
<ul>
<li><a href="luxgrandnz.asp"> 19 day Grand New Zealand</a></li>
<li><a href="luxhighlightsnz.asp">16 day Highlights of New Zealand</a></li>
<li><a href="luxnsi.asp">9 day Northern Spectacular</a></li>
</ul>
</li>
<li><a href="#" > Superior South Island Tours</a>
<ul>
<li><a href="luxsit.asp"> 10 day South Island Spectacular</a></li>
</ul>
</li>
<li><a href="#" > Superior Rail/Coach Tours</a>
<ul>
<li><a href="luxrailcoach.asp"> 19 day Rail/Coach Tour</a></li>
</ul>
</li>
<li><a href="guidedcoach.asp"><strong><font color="#FFCC00">Popular Coach Tour Features</font></strong></a> </li>
<li><a href="#" > Ultimate Series New Zealand Tours</a>
<ul>
<li><a href="coachtour-z.asp">23 Day All New Zealand Ultimate</a></li>
<li><a href="coachtour-x.asp">20 Day Ultimate New Zealand</a></li>
<li><a href="coachtour-xl.asp">13 Day Ultimate Southern Highlights</a></li>
</ul>
</li>
<li><a href="#" > Classic Series New Zealand Tours</a>
<ul>
<li><a href="coachtour-a.asp">18 day Classic Panorama</a></li>
<li><a href="coachtour-c.asp">16 day Classic Vista</a></li>
<li><a href="coachtour-j.asp">14 day Classic Scenic Explorer</a></li>
<li><a href="coachtour-v.asp">12 day Classic Southern Discovery</a></li>
<li><a href="coachtour-i.asp">10 day Classic Nothern Escape</a></li>
<li><a href="coachtour-y.asp">10 day Classic Northern Heritage</a></li>
</ul>
</li>
<li><a href="#" > Classic Series South Island Tours</a>
<ul>
<li><a href="coachtour-L.asp">10 day Classic Southern Panorama</a></li>
<li><a href="coachtour-g.asp">9 day Classic Tranz Alpine</a></li>
</ul>
</li>
<li><a href="guidedcoach.asp" > Highlights New Zealand Tour</a>
<ul name="highlight">
<li><a href="coachtour-LA.asp">18 day New Zealand Highlights</a></li>
<li><a href="coachtour-LB.asp">17 day Highlights of New Zealand</a></li>
<li><a href="coachtour-LAS.asp">11 day Alpine Highlights</a></li>
</ul>
</li>
<li><a href="lowcostfeatures.asp"><strong><font color="#FFCC00">Best Buys Coach Tour Features</font></strong></a> </li>
<li><a href="#" > Best Buys New Zealand Tours</a>
<ul>
<li><a href="newzealandwonders.asp">17 day New Zealand Magic</a></li>
<li><a href="newzealandbestof.asp">17 day New Zealand Contrasts</a></li>
<li><a href="newzealandexperience14.asp">14 day New Zealand Marvel</a></li>
<li><a href="newzealandsplendour14.asp">14 day New Zealand Vista</a></li>
</ul>
</li>
<li><a href="lowcostfeatures.asp" > Best Buys South Island Tours</a>
<ul>
<li><a href="southernspectacular9.asp">9 day Southern Spotlight</a></li>
<li><a href="southernicons.asp">9 day Southern Icons</a></li>
</ul>
</li>
<li><a href="#" > Best Buys North Island Tours</a>
<ul>
<li><a href="northerndiscovery8.asp">8 day Northern Spotlight"</a></li>
</ul>
</li>
</ul>
</li>
<li><a href="activities.asp">NZ Activities/Sightseeing</a></li>
</ul>
<script type="text/javascript">
// BeginOAWidget_Instance_2141544: #MenuBar1
var MenuBar1 = new Spry.Widget.MenuBar2("#MenuBar1", {
widgetID: "MenuBar1",
widgetClass: "MenuBar MenuBar1LeftShrink",
insertMenuBarBreak: true,
mainMenuShowDelay: 100,
mainMenuHideDelay: 200,
subMenuShowDelay: 200,
subMenuHideDelay: 200
// EndOAWidget_Instance_2141544
</script></td>
</tr>
<tr>
<td height="1" bgcolor="#FFFFFF"></td>
</tr>
<tr bgcolor="#0073B2">
<td align="center" bgcolor="#0073B2"><ul id="MenuBar1_2" >
<li><a href="specialinterest.asp" >Special Interest Tours</a>
<ul>
<li><a href="golftours.asp" >Independent Golf Tours</a>
<ul>
<li><a href="golftours.asp">About Our Golf Tours</a></li>
<li><a href="golfgetaways.asp">Golf Getaways</a></li>
<li><a href="NZgolftours.asp" >Full New Zealand Tours</a></li>
<ul>
<li><a href="nzgolftour-a.asp">20 Day \"Longest Drive\" Scenic Golf Tour</a></li>
<li><a href="nzgolftour-b.asp">20 Day \"Down the Fairway\" Scenic Golf Tour"</a></li>
<li><a href="nzgolftour-c.asp">18 Day \"Chip Shot\" Scenic Golf Tour</a></li>
<li><a href="nzgolftour-d.asp">17 Day \"Close to the Pin\" Scenic Golf Tour</a></li>
<li><a href="nzgolftour-e.asp">15 Day \"Down the Middle\" Scenic Golf Tour</a></li>
<li><a href="nzgolftour-f.asp">14 Day \"Hole in One\" Scenic Golf Tour</a></li>
</ul>
<li><a href="sigolftours.asp">South Island Tours</a></li>
<li><a href="nigolftours.asp">North Island Tours</a></li>
</ul>
</li>
<li><a href="winetours.asp" >Independent Wine Tours</a>
<ul>
<li><a href="winetours.asp">About Our Winery Tours</a></li>
<li><a href="NZwinetours.asp">Full New Zealand Tours</a></li>
<li><a href="SIwinetours.asp">South Island Tours</a></li>
<li><a href="NIwinetours.asp">North Island Tours</a></li>
</ul>
</li>
<li><a href="lotr.asp">Independent Lord of the Rings Tours</a></li>
<li><a href="spa.asp">Independent Spa Holidays</a></li>
<li><a href="ski.asp" >Independent Ski Holidays</a>
<ul>
<li><a href="skiqueenstown.asp">Queenstown Ski Package</a></li>
<li><a href="skimounthutt.asp">Mount Hutt Ski Package</a></li>
<li><a href="skiwanaka.asp">Wanaka Ski Package</a></li>
</ul>
</li>
<li><a href="gardentours.asp">Escorted Garden Tours</a></li>
<li><a href="lawnbowls.asp">Escorted Lawn Bowls Tours</a></li>
<li><a href="steamtrain.asp">Escorted Steam Train Tours</a></li>
<li><a href="warbirds.asp">Escorted Warbirds Over Wanaka Tours</a></li>
<li><a href="independentintrepid.asp" >Independent Intrepid Holidays</a>
<ul>
<li><a href="indeintregourmet.asp">Gourmet Wine</a></li>
<li><a href="indeintreculture.asp">Culture & Heritage</a></li>
<li><a href="indeintrecycle.asp">Cycle Touring</a></li>
<li><a href="indeintrewalking.asp">Walking Holidays</a></li>
<li><a href="indeintreactive.asp">Active Outdoors</a></li>
<li><a href="indeintrewildlife.asp">Wildlife Encounters</a></li>
</ul>
</li>
</ul>
</li>
<li><a href="customised.asp" >Customised Vacations</a>
<ul>
<li><a href="honeymoons.asp">Honeymoons</a></li>
<li><a href="luxurylodge.asp">Luxury Lodge Vacations</a></li>
<li><a href="familyholidays.asp">Family Fun Holidays</a></li>
<li><a href="offtrack.asp">Off The Beaten Track</a></li>
</ul>
</li>
<li><a href="accommodation.asp" >Accommodation</a>
<ul>
<li><a href="accommodation.asp">Accommodation Used in Our Tours</a></li>
<li><a href="hotels.asp">Hotel Information</a></li>
-
My MacBook Pro is running very slow with the wheel constantly spinning. Can anyone please help?!?!
My MacBook is running very slow and the wheel is constantly spinning. It's not just using the internet as it takes forever to start, open programs, etc. It is even taking me a long time to type in this question as the spinning wheel keeps coming up. Below is the EtreCheck. I would appreciate it if someone could please help me!
EtreCheck version: 1.9.15 (52)
Report generated September 7, 2014 at 11:30:33 PM EDT
Hardware Information: ?
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information: ?
Intel HD Graphics 4000 - VRAM: (null)
Color LCD 1280 x 800
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 5:3:7
Disk Information: ?
TOSHIBA MK5065GSXF disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (425.17 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-8A8
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[not loaded] com.sony.driver.dsccamFirmwareUpdaterType00 (1 - SDK 10.6) Support
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
Launch Agents: ?
[loaded] com.google.keystone.agent.plist Support
[running] com.sony.SonyAutoLauncher.agent.plist Support
User Launch Agents: ?
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
User Login Items: ?
iTunesHelper
Internet Plug-ins: ?
FlashPlayer-10.6: Version: 14.0.0.176 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 14.0.0.176 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
o1dbrowserplugin: Version: 5.4.2.18903 Support
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
googletalkbrowserplugin: Version: 5.4.2.18903 Support
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Flash Player Support
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
3% WindowServer
0% mdworker
0% Microsoft Excel
0% aosnotifyd
Top Processes by Memory: ?
115 MB Microsoft Excel
115 MB Safari
70 MB Mail
68 MB com.apple.WebKit.WebContent
66 MB com.apple.IconServicesAgent
Virtual Memory Information: ?
1.71 GB Free RAM
1.46 GB Active RAM
161 MB Inactive RAM
685 MB Wired RAM
353 MB Page-ins
0 B Page-outs1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
My daughter's ipod touch is password locked and attached to a computer that doesnt exist anymore. i want to authorize it to my computer itunes account but itunes wont even read it due to the password failure. what can i do?
That's by design. The password is designed to protect the user's information and cannot be circumvented. You can restore it to "new" condition though, and sync it to your computer. The iPod Touch's content will be securely erased by doing this.
Refer to iOS: Unable to update or restore. Follow the instructions exactly as written.
Maybe you are looking for
-
3G S-L-O-W after update to iOS4.0.1
My phone ***** after going to iOS4. It is slow, lags and apps crash a lot. I called tech support and they claim that there are no reported issues, like the ones I have.... I find this very hard to believe. I want to but the new pone, but I don't want
-
How to create a Popup Box in Flash?
Hi, When someone clicks on a movie clip, how can i get another movie clip to popup somewhere else on the screen? Thanks for your help.
-
Improving retrieval performance of essbase server in unix environment
HI, Our production environment is unix system. can any one suggest settings which impact the retrieval performance and how to do these settings in unix environment.
-
How can we enter value more than 99 crores in valuation price field in PR
we want to fill value more than 99 crores in valuation price while making a purchase requisition in sap. we are not able to do that we are getting error entry too long (enter in the format ,,,~.) how can we configure to get more than 9 digits in a va
-
Dunning different business partners as one
Dear experts, can I dun different business partners , with different contract accounts as one? I mean group them, for example acording to certain business partner relationship between them?? Thanks in advance.