Failing to detect NI PCI 1422
I have been experiencing a unique problem with the NI PCI 1422 board. After the first install, everything runs fine. However, after some period of operation, errors appear. Then if the board is ever physically removed from the PC, it will never be detected again.
I am running Windows 2000 Pro, on a AMD XP2100+ with 512Mb PC2700 DDR, and have tried several different motherboards. When you replace the motherboard, the card will be detected but only the first time the system is booted up. From then on it is non-existent. I have tried reinstalling everything, flashing the bios, reinstalling from a drive image where it works etc.
I have built an identical system that works fine. I am fairly sure the framegrabber is not faulty, as I have tr
ied replacing that also (to no avail).
Anyone got any suggestions?
What do you mean not detected? Is it not detected in the Windows Device Manager or in MAX? If it is not detected in Device Manager then you should check that computer BIOS and make sure PnP is enabled and PCI Bus Mastering as well. If it is not detected in MAX try hitting F5 (refresh).
What version of the driver do you have? I suggest you have the latest one, 2.5.5.
If Device Manager does recognizes the board you may want to uninstall it from there and then click the refresh button inside Device Manager as well. And see if that recognizes the hardware.
Nestor.
Nestor
National Instruments
Similar Messages
-
PCI-1422 Windows7 32bit Problems
I have a legacy program that I am trying to port from WindowsXP to 32bit version of Windows7. This program is based on the PCI-1422 frame grabber.
For historical purposes, I have to use NI-IMAQ version 2.5.3, which installs version 2.0.3.17 of NI-MAX
From a clean build of Win7 x32, I can install NI software, and the old application which creates correct camera definition files.
When I add the frame grabber card, Windows device manager is happy... the card is correctly identified and seems to use driver files which match the old WinXP install.
When I look at the card with NI-MAX, the camera correctly appears in the configuration list. If I highlight Channel 0 device and run 'Diagnostic' all tests seem to pass correctly. (Again the displayed output matches the results from the same operation on the old WinXP box)
However if I try to 'Snap' or 'Grab' a frame, I get the following error box: Title = 'Acquisition Error' and there is NO TEXT in the error description, only a yellow ! warning icon.
(The legacy program performs all controlling functions via two other PCI cards, but halts when trying to grab a frame as well. The above behavior can be seen with or without these additional PCI cards)
I have tried both installing and executing the EXE files with or without 'Run as Admin' and/or 'WinXP SP3 compatibility mode'. In some cases, the available camera list disappears, but nothing I have done has been succesful at grabbing a frame from the camera.
Any suggestions about compatibility and/or why the error box is missing all text?
Thanks in advance,
JimGood questions...
I have been asked to 'upgrade' a commercial system that was developed 10 years ago. The system works currently... an XP based system with old frame grabber. I was asked if I could upgrade the PC, because of concerns of PC failure with a 10 yr old box. We found a new motherboard that supports the necesary 3 PCI slots for frame grabber, and newer CPU of course.
The question remains however, can we migrate to Win7, or... do we try to install WinXP on the new PC hardware, with the older interface cards. To add to the difficulties, the original company than produced the software is no longer in business. Fortunately I have remained in contact with some of the developers that are giving me some support, but they haven't supported the product for years either.
The basic issue remains... hardware and software that worked on XP, has been migrated. The devices appear in some sense to be detected correctly. But the critical important issue, grabbing a frame from the camear, fails. What can be done? -
Raytheon 2000b camera with PCI-1422
I am trying to use a Raytheon 2000b camera with PCI-1422. I have downloaded the attached doc and icd file from NI.
1. As far as I now there is no proper NI cable for my camera, but the pinout is described in the doc file. I would like to purchase a cable, and solder a connector on it for my camera. Which cable should I choose, if I need the following pins on the PCI-1422 side: 1-32, 41-46, 49-50, 93-94, 99-100?
2. The icd file supports image acquisition only, attribute settings via serial line are not contained. I would like to add this feature, but I could not find any description about the icd files. Where can I find a document that would help me?
Attachments:
Raytheon_2000b_Pinout.doc 74 KB
Raytheon_2000b.icd 3 KBMy problem is solved now.
But I don't know what is the exact solution.
The camera & cable provider and me tried as below.
try-1. connecting tm-1320-15 and 1422 with serial-enabled cable
try-2. changing 'OnBoardClock(20)' to 'OnBoardClock(25)'
With only 'try-1 ', it failed. but additional 'try-2' we could snap and grab the camera image.
And now, I can get images without serial-enabled cable, regardless of OnBoardClock speed.
I think the camera has been initialized with max's parameters(same as icd file) when the serial commnunication had enabled for the first time.
(I'll verify this assumption with new tm-1320-15 later.)
Thank you.
Tip : If tm-1320-15 and 1422 makes error because of parameter mismatching, reset the tm-1320-15's power. -
MAX detects PXI-MXI-4, but fails to detect non-NI chassis
MAX detects PXI-MXI-4, but fails to detect non-NI chassis. My system is as follow:
NI PCI-6552 (NI DAQmx device)
NI PXI-MXI-4/ PXI-8331 (PXI system)
Elma chassis, with CompactPCI backplane (chassis and cPCI)
When I run MAX, it successfully detects PCI and PXI with the model number listed. However, the chassis is unidentified. Although my chassis is made by Elma, not NI, it has been confirmed that my Elma chassis, as well as the CompactPCI backplane that comes with the chassis, is compatible with the PXI.
When I clicked on "other chassis", the chassis.ini (driver) file is asked. But I've confirmed with Elma that no driver is required for the chassis.
What might be the problem? Thank you very much.
MansonI'm having a similar problem, and from reading the above, it's not clear what one is to do if the chassis and link vendors say "there are no driver files, and none are needed" and NI says, "you must have the appropriate files, which are provided by the vendor." Specifically, I have a Jasper Electronics PXI chassis and a Hartmann StarFabric link (PCI bridge). My NI devices in this chassis (6071E, 6533) have always worked fine, and MAX displays them correctly under Traditional Devices and under DAQmx Devices. The PXI chassis shows up as "unidentified" in MAX, but this has never caused any problems before (and I've seen the same benign error with other non-NI PXI chassis). However, now that I'm using DAQmx, I'm trying to do the following:
DAQmxConnectTerms("/Dev3/PXI_Trig0", "/Dev3/PFI5", DAQmx_Val_DoNotInvertPolarity);
where Dev3 is a PXI-6533. When I start my task, I get the error message "Driver cannot complete the route, because the only way to make the route requires a trigger bus line, and no trigger bus has been configured in MAX for this device." The documentation seems to imply that identifying the chassis will automatically create or recognize the appropriate PXI trigger lines. Since the vendors don't supply any ini files, I tried faking it out as as PXI-8150 system with a PXI-1000 chassis, using the NI ini files; this resulted in entries for both NI cards appearing under "Chassis 1 (PXI-1000)", e.g.
PXI5::11::INSTR (PXI-6533)
PXI5::12::INSTR (PXI-6017E)
although their properties (in the pane to the right of the tree view) show their chassis and slots as "unknown." When I run my code, I still get the error message about needing to configure a trigger bux in MAX. Just for grins, I tried the same thing but with RTSI0 instead of PXI_Trig0, and got the same error. I created an RTSI cable under DAQmx Devices in MAX, and that made no difference. Help!
Thanks,
Larry -
ATI Radeon HD 5870 failing to detect displays randomly during reboots
Hello,
I have a Mac Pro 1,1 A1186 computer, MAC OS X 10.6.6, and I just updated the ole 7300 video card to an ATI Radeon HD 5870 I just purchased from the Apple Store last week.
Problem: Mac OS X 10.6.6 keeps losing the display settings during reboots and fails to detect one of the monitors (the Acer X233H) randomly upon reboots. I tried using two Mini DisplayPort to DVI Adapters, but when that produced undesirable results I just plugged one of the monitors into the DVI diplay port and used just one of the Mini DisplayPort to DVI adapters. Then I tried swapping the monitors around.
I know both monitors and cables that directly connect to the monitors work fine as *they worked on the 7300 adapter*. I'm not using an Apple display, so I'm wondering do I have a bad card or is this common?
I tried reseating the card, completely disconnecting it and reinstalling it. I have both power cables plugged into the card, and both monitors will come up eventually if I keep rebooting my system (if they didn't come up the first time).
Please help... this whole experience is ruining my buzz for purchasing such a kick butt OEM card from Apple. Thank you very much in advanced.
I have 14GB of RAM, 2TB Western Digital (for backup/archival purposes), and an SSD Patriot Torqx 128GB Drive. The Diagnostics state they passed, and everything else works fine except for the display detection.
Here is the setup of the monitors I'm using:
Chipset Model: ATI Radeon HD 5870
Type: GPU
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 1024 MB
Vendor: ATI (0x1002)
Device ID: 0x6898
Revision ID: 0x0000
ROM Revision: 113-C0780C-194
EFI Driver Version: 01.00.436
Displays:
Acer X223W:
Resolution: 1680 x 1050 @ 60 Hz
Pixel Depth: 32-Bit Color (ARGB8888)
Mirror: Off
Online: Yes
Rotation: Supported
ACER X233H:
Resolution: 1920 x 1080 @ 60 Hz
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Rotation: Supported
Display Connector:
Status: No Display ConnectedOK, I took your advise and tried the "active powered" adapter last night. No dice. The monitor detection still doesn't work even after purchasing the $100 adapter for only 2 displays. Connecting one of the monitors to the DVI display in the back and connecting the other display to the Mini DisplayPort to Dual-Link DVI Adapter.
_This is not the solution as the problem still occurs._
I also tried reloading Mac OS X Snow Leopard last night wiping out everything on the entire partition to be extreme thinking that the system could be confused. I know I could've just deleted the configuration file, but hey... what the heck.
After applying the updates I was able to see both displays again, +_however again they got confused_+.
The end result is from what I believe that the card is inferior in the way it doesn't allow Mac OS X to detect displays properly and or a driver update needs to be issued from Apple to address this issue.
After trying multiple things it would appear that there is only 1 work around as suggest from above (put the computer to sleep). However, to properly fix things we shouldn't have to utilize work arounds.
Important facts that lead me to this conclusion are:
1. Mac OS X 10.6.6 does detect displays properly with the 7300 with no problem.
2. The monitors and cables work properly with the 7300 card, and other systems. So they are not the issue.
3. After installing the ATI 5870 card that's when we I experienced the issues that didn't go away no matter what cable I used or where I plugged the monitors.
a. Thus a $100 cable or a $30 cable worked the same for this issue.
4. Reinstalling OS X 10.6.6 completely and wiping out everything including the display configuration had no bearing on any of this.
Therefore, it can only be two things by deduction:
1. The firmware of the card needs a revision to help support multiple displays.
and/or
2. The driver for the ATI 5870 needs a revision to correct multiple display support within the Operating System.
However, I can't see paying over $500 for a card and an adapter that doesn't work properly. If there is no hope that Apple or ATI is working on this issue with the ATI 5870 card, I have only one recourse and that is not to support this particular ATI product and take it back. I know I can always just keep putting my computer to sleep, but over $500 for a video card and an adapter that is riddled with bugs is way too much for me.
*I'm taking the card back and reinstalling the 7300 until a proper card can be produced or an update is issued to specifically correct multiple display support.*
*Thank you* everyone for your help, I really appreciate it. *+However, the users of the systems can only do so much without proper support from Apple and/or ATI on this issue.+* -
Windows Update Client failed to detect with error 0xc8000247 after using Lenovo System Update 5
My Windows 7, SP1 was running fine, until I installed few updates on 10/15 using Lenovo System Update 5 then Windows Update stopped working, shows as RED:
{CE3119AD-35EF-41CF-9C21-C7698FEB8393} 2013-10-14 21:53:00:256-0700 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Software Synchronization Windows Update Client successfully detected 4 updates.
{EB17A01A-EB6E-49FF-9EA2-AA0DD063B4B1} 2013-10-15 04:15:54:069-0700 1 162 101 {C61A0D00-3E51-48AC-B0AF-1D3E02B9E5D3} 201 0 AutomaticUpdates Success Content Download Download succeeded.
{77DAE88F-2795-4258-8BBF-8D27E53662CF} 2013-10-15 12:10:38:196-0700 1 193 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Content Install Restart Required: To complete the installation of the following updates, the computer must be restarted. Until this computer has been restarted, Windows cannot search for or download new updates: - Security Update for Windows 7 for x64-based Systems (KB2862330)
{1398F777-3AEF-4D1D-BE4C-407EC4AEAD4C} 2013-10-15 12:15:25:676-0700 1 183 101 {C61A0D00-3E51-48AC-B0AF-1D3E02B9E5D3} 201 0 AutomaticUpdates Success Content Install Installation Successful: Windows successfully installed the following update: Security Update for Windows 7 for x64-based Systems (KB2862330)
{A220898A-E5FE-4FE7-8413-2B0C7B4013D0} 2013-10-15 12:15:25:766-0700 1 202 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Content Install Reboot completed.
{A5400FF2-33ED-4A47-8409-13E5DFE16A6D} 2013-10-15 19:29:31:486-0700 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0 ChkWuDrv Success Software Synchronization Windows Update Client successfully detected 0 updates.
{43C533EE-775D-445E-A652-06648B72DE65} 2013-10-15 19:29:49:702-0700 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0 ChkWuDrv Success Software Synchronization Windows Update Client successfully detected 0 updates.
{D6AAAFFB-7F18-4A7E-B39D-1BA09CDC5E6D} 2013-10-15 19:30:05:744-0700 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Software Synchronization Windows Update Client successfully detected 3 updates.
{4E73B1C1-5BA2-415D-AB34-92F7AB3DB418} 2013-10-15 19:30:08:753-0700 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0 ChkWuDrv Success Software Synchronization Windows Update Client successfully detected 0 updates.
{51248882-41AC-4E59-B813-87AD326310AD} 2013-10-15 20:00:05:044-0700 1 183 101 {DBD3B4E9-0357-47DA-8317-D0CF2163BFE6} 501 0 wusa Success Content Install Installation Successful: Windows successfully installed the following update: Hotfix for Windows (KB2661796)
{FB2B8E5E-442C-4E76-B23D-6A41B4324C9D} 2013-10-16 00:11:39:832-0700 1 148 101 {00000000-0000-0000-0000-000000000000} 0 c8000247 AutomaticUpdates Failure Software Synchronization Windows Update Client failed to detect with error 0xc8000247.
Lenovo Thinkpad W500, Intel (R), Windows 7, SP1, latest updates as of Oct 15
(1) Checked Setting, set to automatic update whenever, even changed to never update, rebooted the OS and changed back to automatic update and rebooted the OS.
(2) Stopped Windows Update Services, renamed SoftwareDistribution folder and started the window update services and rebooted.
(3) Ran MS FIXIT
(4) Ran System File checker Scan (sfc /scannow)
(5) Ran CHKDSK /F
(6) Installed "Intel Rapid Storage Technology" drivers from Lenovo site
(7) Ran Update for Windows 7 for x64-based Systems (KB971033)
None of the above possible recommended solutions were able to fix the issue yet and now I am getting a message your Window is Not Genuine!
Any help or guidance is appreciated.
Solved!
Go to Solution.The Lenovo System Update installed the "Intel Matrix Storage Manager driver 8.9.2.1002" right before the Windows Upgrade got broken. So in the Device Manager under IDE ATA/ATAPI Controllers, I choose Intel ICH9M-E/M SATA AHCI Controller, on the Driver Tab, I choose the option "Roll Back Driver" and after rolling back the driver and restarting the OS, now Windows Update is working like a Champ!
The End! -
How can I access the control lines of a PCI-1422 from within C++?
I would like to know how the control lines of a PCI-1422 can be accessed (set) programmatically from within C++ (MS VC++7, Windows XP). A flat panel sensor connected to the PCI-1422 needs the control lines to switch on features like binning which I want to use.
Unfortunately I was unable to identify an appropriate command in the IMAQ documentation. Does anyone have experiences with this?
Thank you very much in advance!Kluas,
The control lines are not exposed through any API. The control lines are run by the driver based on the instructions in the camera files. If the cammera file supports the binning functionality of your camera then you should be able to set the attributes such that the board runs the control lines approriately.
Hope this helps,
Amaury
NI Applications Engineer -
Hi Experts,
We have installed UISKPI01 in SAP NetWeaver Gateway System for Fiori Analytical Apps (KPI modeler is necessary to model the KPI) but while trying to create and Save the Group, we are Getting an error in KPI Modeler as "{"customMessage":"failed to detect the sap language of the current session language","status":500}". Similarly, when we are trying to edit the existing KPI template and assigning the Variants and Evaluations, we are facing the same error as failed to detect the sap language of the current session language","status":500.
Any idea on above error?
Thanking you,
~ MahendraHello Mahendra,
Check if you have entries in the T002 table of SAP_SSB schema.
If not follow the steps mentioned in the admin guide of SAP Smart business to populate data.
This should resolve this issue.
Note: My assumption is that, you are accessing the KPI modeler in English Language.
Thanks,
Debasish -
Windows Install fails to detect VSTO 4.0 in Windows machine
I’ve to install excel based application developed in VS 2010.
Windows installer fails while detecting VSTO in Windows 7/8/8.1. Its perquisites are .Net framework 4.0 client frame work and VSTO 4.0.
Even we have installed VSTO manually and re-run our setup and again we are getting the same error (“Installer was not able to automatically download the VSTO installation”), the custom message. Don’t know what is blocking to detect VSTO on some particular
machine. I'm using only this condition "VSTORUNTIMEREDIST>="10.0.30319" as in Launch Conditions from last 3 years.
Now from last couple of months I'm getting this error when instating my application, somehow when I add another condition i.e. VSTORUNTIMEREDIST>="10.0.30319" OR OFFICERUNTIME>=”10.0.21022”, it works properly.
I want to know that is there any windows patch is released due to which my installer is not able to detect VSTO in machine.
Thanks in advance.
Thanks Utshek Jain> Is VSTO Runtime detection depends on full edition of .NET framework?
I have never seen the client profile mentioned in MSDN. For example, take a look at the
Running Solutions in Different Versions of Microsoft Office article which provides the following info:
Version of Office targeted by the project template
Target .NET Framework of the project1
Versions of Office that can run the solution
Required runtime on end user computer
Office 2013
.NET Framework 4
or
.NET Framework 4.5
Office 2013
Office 2010
2007 Microsoft Office system2
Visual Studio 2010 Tools for Office Runtime
Office 2010
.NET Framework 4
or
.NET Framework 4.5
Office 2013
Office 2010
2007 Microsoft Office system2
Visual Studio 2010 Tools for Office Runtime
Office 2010
.NET Framework 3.5
Office 2013
Office 2010
Visual Studio 2010 Tools for Office Runtime
2007 Microsoft Office system
.NET Framework 4,
.NET Framework 4.5,
or
.NET Framework 3.5
Office 2013
Office 2010
2007 Microsoft Office system
Visual Studio 2010 Tools for Office Runtime
BTW Did you include the required interop files in the installer? -
X fails to detect monitor supported resolutions
I have 3 monitors connected to a Radeon HD 7750, using the radeon driver:
Left: NEC MultiSync 90GX², 1280x1024, connected via DisplayPort-to-VGA adaptor
Middle: Samsung SyncMaster BX2335, 1920x1080, connected via DVI
Right: LG Flatron Wide, 1680x1050, connected via HDMI
On every reboot (warm or cold), X fails to detect the NEC monitor's supported resolutions. xrandr will only set it to 1024x768 or less, and it shows "no signal". However if I disconnect the VGA cable, plug it into another monitor (which is broken, but still powers on), and run xrandr again, it lists up to 1280x1024. If I then set the correct modes and layouts, then return the VGA cable to the NEC monitor, it works just fine. Turning the display off via xset doesn't cause any issue either. So on every reboot I have to move the cable to a spare monitor, set up xrandr, then move the cable back.
How can I save this working configuration and force X to apply it on boot even though the monitor for some reason claims to not support it?
I didn't have this issue with Ubuntu, but my setup was a bit different there, so possibly it just didn't manifest.
Here is the Xorg.0.log and journalctl -k from the most recent boot. The get-edid output is also interesting (and contains some control characters which pastebin removed).The NEC on DVI would be only temporarily to get it's real edid-data .
Once you got that in a file, you can use a special kernel parameter at boot to force use of the real edid-data for the NEC monitor.
https://wiki.archlinux.org/index.php/Ke … s_and_EDID describes how it could be done.
Note that configuring this is tricky. -
Acrobat X selection tool fails to detect paragraphs of text...
Acrobat X selection tool fails to detect paragraphs of text. Manually selected paragraphs have broken sentences with line breaks. This problem is also noticed when you attempt to triple click a paragraph and only one line of text is selected instead of a paragraph. Can this be fixed?
can't it tell by the visual formatting of indents, text proximity/clusters, etc? if humans can tell, why can't acrobat be trained to tell?
-
Failed to detect if this server is joined to a server farm
Hi,
We run our intranet on a virtual server. the other day it crashed and we restored it from a previous point
However when we launch the intranet we just get a an unexpected error has occurred. I am able to get into central admin but that's about it
I though of maybe running the product config wizard but it get an error saying "failed to detect if this server is joined to a server farm. Possible reasons for this failure could be that you no longer have the appropriate permissions to the server
farm, the database server hosting the server farm is in responsive, the configuration database is inaccessible or this server has been removed from the server farm"
this is what the logs it tell you to look in says:01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function Parameter.Parameter
01/30/2014 10:03:01 1 INF Entering function Parameter.Initialze
01/30/2014 10:03:01 1 INF Leaving function Parameter.Initialze
01/30/2014 10:03:01 1 INF Leaving function Parameter.Parameter
01/30/2014 10:03:01 1 INF Entering function StringExposedParameter.StringExposedParameter
01/30/2014 10:03:01 1 INF Creating the server string exposed parameter
01/30/2014 10:03:01 1 INF Leaving function StringExposedParameter.StringExposedParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ConfigurationDatabaseParameterDatabaseHelp for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ConfigurationDatabaseParameterDatabaseHelp is The configuration database name.
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function Common.CreateUniqueGuidString
01/30/2014 10:03:01 1 INF Leaving function Common.CreateUniqueGuidString
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ConfigurationDatabaseDatabaseNameLabel for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ConfigurationDatabaseDatabaseNameLabel is D&atabase name:
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ConfigurationDatabaseValidationDatabaseNameLabel for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ConfigurationDatabaseValidationDatabaseNameLabel is database name
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function Parameter.Parameter
01/30/2014 10:03:01 1 INF Entering function Parameter.Initialze
01/30/2014 10:03:01 1 INF Leaving function Parameter.Initialze
01/30/2014 10:03:01 1 INF Leaving function Parameter.Parameter
01/30/2014 10:03:01 1 INF Entering function StringExposedParameter.StringExposedParameter
01/30/2014 10:03:01 1 INF Creating the database string exposed parameter
01/30/2014 10:03:01 1 INF Leaving function StringExposedParameter.StringExposedParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ConfigurationDatabaseParameterAdminContentDatabaseHelp for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ConfigurationDatabaseParameterAdminContentDatabaseHelp is The Central Administration Web Application content database name.
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function Common.CreateUniqueGuidString
01/30/2014 10:03:01 1 INF Leaving function Common.CreateUniqueGuidString
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is AdminContentDatabaseNameLabel for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id AdminContentDatabaseNameLabel is Central Administration Web Application content database name:
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is AdminContentDatabaseValidationDatabaseNameLabel for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id AdminContentDatabaseValidationDatabaseNameLabel is Central Administration Web Application content database name
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function Parameter.Parameter
01/30/2014 10:03:01 1 INF Entering function Parameter.Initialze
01/30/2014 10:03:01 1 INF Leaving function Parameter.Initialze
01/30/2014 10:03:01 1 INF Leaving function Parameter.Parameter
01/30/2014 10:03:01 1 INF Entering function StringExposedParameter.StringExposedParameter
01/30/2014 10:03:01 1 INF Creating the admincontentdatabase string exposed parameter
01/30/2014 10:03:01 1 INF Leaving function StringExposedParameter.StringExposedParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddIncludeParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddIncludeParameter
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ConfigurationDatabaseParameterSqlAuthenticationUserHelp for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ConfigurationDatabaseParameterSqlAuthenticationUserHelp is The SQL server user name used for SQL authentication.
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ConfigurationDatabaseUsernameLabel for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ConfigurationDatabaseUsernameLabel is Sql database user:
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ConfigurationDatabaseValidationUsernameLabel for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ConfigurationDatabaseValidationUsernameLabel is Sql database user
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function Parameter.Parameter
01/30/2014 10:03:01 1 INF Entering function Parameter.Initialze
01/30/2014 10:03:01 1 INF Leaving function Parameter.Initialze
01/30/2014 10:03:01 1 INF Leaving function Parameter.Parameter
01/30/2014 10:03:01 1 INF Entering function StringExposedParameter.StringExposedParameter
01/30/2014 10:03:01 1 INF Creating the dbuser string exposed parameter
01/30/2014 10:03:01 1 INF Leaving function StringExposedParameter.StringExposedParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ConfigurationDatabaseParameterSqlAuthenticationPasswordHelp for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ConfigurationDatabaseParameterSqlAuthenticationPasswordHelp is The SQL server password used for SQL authentication.
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ConfigurationDatabasePasswordLabel for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ConfigurationDatabasePasswordLabel is Sql database password:
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ConfigurationDatabaseValidationPasswordLabel for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ConfigurationDatabaseValidationPasswordLabel is Sql database password
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function Parameter.Parameter
01/30/2014 10:03:01 1 INF Entering function Parameter.Initialze
01/30/2014 10:03:01 1 INF Leaving function Parameter.Initialze
01/30/2014 10:03:01 1 INF Leaving function Parameter.Parameter
01/30/2014 10:03:01 1 INF Entering function StringExposedParameter.StringExposedParameter
01/30/2014 10:03:01 1 INF Creating the dbpassword string exposed parameter
01/30/2014 10:03:01 1 INF Leaving function StringExposedParameter.StringExposedParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddIncludeParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddIncludeParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddIncludeParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddIncludeParameter
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is FarmUserAccountHelp for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id FarmUserAccountHelp is Server farm administrator user account.
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ConfigurationDatabaseFarmUsernameLabel for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ConfigurationDatabaseFarmUsernameLabel is &Username:
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ConfigurationDatabaseValidationFarmUsernameLabel for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ConfigurationDatabaseValidationFarmUsernameLabel is username
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function Parameter.Parameter
01/30/2014 10:03:01 1 INF Entering function Parameter.Initialze
01/30/2014 10:03:01 1 INF Leaving function Parameter.Initialze
01/30/2014 10:03:01 1 INF Leaving function Parameter.Parameter
01/30/2014 10:03:01 1 INF Entering function StringExposedParameter.StringExposedParameter
01/30/2014 10:03:01 1 INF Creating the user string exposed parameter
01/30/2014 10:03:01 1 INF Leaving function StringExposedParameter.StringExposedParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is FarmUserAccountPasswordHelp for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id FarmUserAccountPasswordHelp is Server farm administrator user account password.
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ConfigurationDatabaseFarmPasswordLabel for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ConfigurationDatabaseFarmPasswordLabel is &Password:
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ConfigurationDatabaseValidationFarmPasswordLabel for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ConfigurationDatabaseValidationFarmPasswordLabel is password
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function Parameter.Parameter
01/30/2014 10:03:01 1 INF Entering function Parameter.Initialze
01/30/2014 10:03:01 1 INF Leaving function Parameter.Initialze
01/30/2014 10:03:01 1 INF Leaving function Parameter.Parameter
01/30/2014 10:03:01 1 INF Entering function StringExposedParameter.StringExposedParameter
01/30/2014 10:03:01 1 INF Creating the password string exposed parameter
01/30/2014 10:03:01 1 INF Leaving function StringExposedParameter.StringExposedParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddIncludeParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddIncludeParameter
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is MasterPassphraseHelp for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id MasterPassphraseHelp is Passphrase used to join the server farm. Note: this must be identical on all the server farm machines.
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ConfigurationDatabaseMasterPassphraseLabel for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ConfigurationDatabaseMasterPassphraseLabel is Passp&hrase:
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ConfigurationDatabaseValidationMasterPassphraseLabel for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ConfigurationDatabaseValidationMasterPassphraseLabel is passphrase
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function Parameter.Parameter
01/30/2014 10:03:01 1 INF Entering function Parameter.Initialze
01/30/2014 10:03:01 1 INF Leaving function Parameter.Initialze
01/30/2014 10:03:01 1 INF Leaving function Parameter.Parameter
01/30/2014 10:03:01 1 INF Entering function StringExposedParameter.StringExposedParameter
01/30/2014 10:03:01 1 INF Creating the passphrase string exposed parameter
01/30/2014 10:03:01 1 INF Leaving function StringExposedParameter.StringExposedParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ActiveDirectoryDomainParameterHelp for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ActiveDirectoryDomainParameterHelp is Active Directory domain name used for the server farm.
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ConfigurationDatabaseActiveDirectoryDomainLabel for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ConfigurationDatabaseActiveDirectoryDomainLabel is Active Directory Do&main:
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ConfigurationDatabaseValidationActiveDirectoryDomainLabel for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ConfigurationDatabaseValidationActiveDirectoryDomainLabel is Active Directory Domain
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function Parameter.Parameter
01/30/2014 10:03:01 1 INF Entering function Parameter.Initialze
01/30/2014 10:03:01 1 INF Leaving function Parameter.Initialze
01/30/2014 10:03:01 1 INF Leaving function Parameter.Parameter
01/30/2014 10:03:01 1 INF Entering function StringExposedParameter.StringExposedParameter
01/30/2014 10:03:01 1 INF Creating the addomain string exposed parameter
01/30/2014 10:03:01 1 INF Leaving function StringExposedParameter.StringExposedParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddIncludeParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddIncludeParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddExcludeParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddExcludeParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddExcludeParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddExcludeParameter
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ActiveDirectoryOrganizationUnitParameterHelp for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ActiveDirectoryOrganizationUnitParameterHelp is Active Directory organization unit name used for the server farm.
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ConfigurationDatabaseActiveDirectoryOrganizationUnitLabel for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ConfigurationDatabaseActiveDirectoryOrganizationUnitLabel is Active Directory Or&ganizational Unit:
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ConfigurationDatabaseValidationActiveDirectoryOrganizationUnitLabel for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ConfigurationDatabaseValidationActiveDirectoryOrganizationUnitLabel is Active Directory Organizational Unit
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function Parameter.Parameter
01/30/2014 10:03:01 1 INF Entering function Parameter.Initialze
01/30/2014 10:03:01 1 INF Leaving function Parameter.Initialze
01/30/2014 10:03:01 1 INF Leaving function Parameter.Parameter
01/30/2014 10:03:01 1 INF Entering function StringExposedParameter.StringExposedParameter
01/30/2014 10:03:01 1 INF Creating the adorgunit string exposed parameter
01/30/2014 10:03:01 1 INF Leaving function StringExposedParameter.StringExposedParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddIncludeParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddIncludeParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddExcludeParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddExcludeParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddExcludeParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddExcludeParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddIncludeParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddIncludeParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddIncludeParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddIncludeParameter
01/30/2014 10:03:01 1 INF Entering function Command.AddParameter
01/30/2014 10:03:01 1 INF Adding parameter create to command configdb
01/30/2014 10:03:01 1 INF Entering function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Adding entry create to collection.
01/30/2014 10:03:01 1 INF Adding object with value create to the collection
01/30/2014 10:03:01 1 INF Leaving function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Leaving function Command.AddParameter
01/30/2014 10:03:01 1 INF Entering function Command.AddParameter
01/30/2014 10:03:01 1 INF Adding parameter disconnect to command configdb
01/30/2014 10:03:01 1 INF Entering function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Adding entry disconnect to collection.
01/30/2014 10:03:01 1 INF Adding object with value disconnect to the collection
01/30/2014 10:03:01 1 INF Leaving function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Leaving function Command.AddParameter
01/30/2014 10:03:01 1 INF Entering function Command.AddParameter
01/30/2014 10:03:01 1 INF Adding parameter connect to command configdb
01/30/2014 10:03:01 1 INF Entering function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Adding entry connect to collection.
01/30/2014 10:03:01 1 INF Adding object with value connect to the collection
01/30/2014 10:03:01 1 INF Leaving function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Leaving function Command.AddParameter
01/30/2014 10:03:01 1 INF Entering function Command.AddParameter
01/30/2014 10:03:01 1 INF Adding parameter server to command configdb
01/30/2014 10:03:01 1 INF Entering function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Adding entry server to collection.
01/30/2014 10:03:01 1 INF Adding object with value server to the collection
01/30/2014 10:03:01 1 INF Leaving function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Leaving function Command.AddParameter
01/30/2014 10:03:01 1 INF Entering function Command.AddParameter
01/30/2014 10:03:01 1 INF Adding parameter database to command configdb
01/30/2014 10:03:01 1 INF Entering function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Adding entry database to collection.
01/30/2014 10:03:01 1 INF Adding object with value database to the collection
01/30/2014 10:03:01 1 INF Leaving function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Leaving function Command.AddParameter
01/30/2014 10:03:01 1 INF Entering function Command.AddParameter
01/30/2014 10:03:01 1 INF Adding parameter dbuser to command configdb
01/30/2014 10:03:01 1 INF Entering function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Adding entry dbuser to collection.
01/30/2014 10:03:01 1 INF Adding object with value dbuser to the collection
01/30/2014 10:03:01 1 INF Leaving function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Leaving function Command.AddParameter
01/30/2014 10:03:01 1 INF Entering function Command.AddParameter
01/30/2014 10:03:01 1 INF Adding parameter dbpassword to command configdb
01/30/2014 10:03:01 1 INF Entering function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Adding entry dbpassword to collection.
01/30/2014 10:03:01 1 INF Adding object with value dbpassword to the collection
01/30/2014 10:03:01 1 INF Leaving function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Leaving function Command.AddParameter
01/30/2014 10:03:01 1 INF Entering function Command.AddParameter
01/30/2014 10:03:01 1 INF Adding parameter user to command configdb
01/30/2014 10:03:01 1 INF Entering function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Adding entry user to collection.
01/30/2014 10:03:01 1 INF Adding object with value user to the collection
01/30/2014 10:03:01 1 INF Leaving function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Leaving function Command.AddParameter
01/30/2014 10:03:01 1 INF Entering function Command.AddParameter
01/30/2014 10:03:01 1 INF Adding parameter password to command configdb
01/30/2014 10:03:01 1 INF Entering function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Adding entry password to collection.
01/30/2014 10:03:01 1 INF Adding object with value password to the collection
01/30/2014 10:03:01 1 INF Leaving function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Leaving function Command.AddParameter
01/30/2014 10:03:01 1 INF Entering function Command.AddParameter
01/30/2014 10:03:01 1 INF Adding parameter passphrase to command configdb
01/30/2014 10:03:01 1 INF Entering function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Adding entry passphrase to collection.
01/30/2014 10:03:01 1 INF Adding object with value passphrase to the collection
01/30/2014 10:03:01 1 INF Leaving function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Leaving function Command.AddParameter
01/30/2014 10:03:01 1 INF Entering function Command.AddParameter
01/30/2014 10:03:01 1 INF Adding parameter addomain to command configdb
01/30/2014 10:03:01 1 INF Entering function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Adding entry addomain to collection.
01/30/2014 10:03:01 1 INF Adding object with value addomain to the collection
01/30/2014 10:03:01 1 INF Leaving function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Leaving function Command.AddParameter
01/30/2014 10:03:01 1 INF Entering function Command.AddParameter
01/30/2014 10:03:01 1 INF Adding parameter adorgunit to command configdb
01/30/2014 10:03:01 1 INF Entering function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Adding entry adorgunit to collection.
01/30/2014 10:03:01 1 INF Adding object with value adorgunit to the collection
01/30/2014 10:03:01 1 INF Leaving function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Leaving function Command.AddParameter
01/30/2014 10:03:01 1 INF Entering function Command.AddParameter
01/30/2014 10:03:01 1 INF Adding parameter admincontentdatabase to command configdb
01/30/2014 10:03:01 1 INF Entering function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Adding entry admincontentdatabase to collection.
01/30/2014 10:03:01 1 INF Adding object with value admincontentdatabase to the collection
01/30/2014 10:03:01 1 INF Leaving function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Leaving function Command.AddParameter
01/30/2014 10:03:01 1 INF Entering function CommandCollectionBase.CommandCollectionBase
01/30/2014 10:03:01 1 INF Leaving function CommandCollectionBase.CommandCollectionBase
01/30/2014 10:03:01 1 INF Entering function Command.Command
01/30/2014 10:03:01 1 INF Leaving function Command.Command
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ConfigurationDatabaseParameterNoInstallCheckHelp for language English (United States) -
I have devices loaded but new devices keep getting this error "Authentication failed on device 3 times. Failed to detect SSH version running on the device. PRIMARY-STARTUP config Fetch Operation failed for TFTP" - which trying to get configurations. I am using LMS 3.0.1
I tried to TELNET on devices via Putty port 22 no good. Please help?
Name Version License Status Size CiscoWorks Common Services 3.1.1 Licensed Not applicable Campus Manager 5.0.3 Purchased 1500 CiscoView 6.1.7 Licensed Not applicable CiscoWorks Assistant 1.0.1 Licensed Not applicable Device Fault Manager 3.0.3 Purchased 1500 Internetwork Performance Monitor 4.0.1 Purchased 1500 Integration Utility 1.7.1 Licensed Not applicable LMS Portal 1.0.1 Licensed Not applicable Resource Manager Essentials 4.1.1 Purchased 1500Showing 1-1 of 1 records
Go to page:
of 1 pages
Device Name
SysObjectID
Model
Device Status
Inventory Status
Inventory Last Updated Time
Config Status
Config Last Updated Time
1.
R2020012_01
.1.3.6.1.4.1.9.1.576
Cisco 2811 Integrated Services Router
Normal
Success
Jan 13 2011 10:43:49 EST
Failed
Jan 13 2011 10:37:24 EST
Rows per page:
20 50 100 500
Go to page:
of 1 pages -
Failed to detect hard drive at the first boot
My new system always failed to detect the hard drive at the first boot, but it's ok if restart it. Not use Raid (disabled). Any help will be greatly appreciated. ?(
Yingsheng
KT3-Ultra-ARU
AMD XP1900
GF2MX400
512 PC2100 Mushkin
300W Antec PSU
Western 40G7200PM
Buslink DVD-ROM
Sony CD-RWQuote
Originally posted by Yingsheng
My new system always failed to detect the hard drive at the first boot, but it's ok if restart it. Not use Raid (disabled). Any help will be greatly appreciated
That is another classic symptom of a WD hard drive being jumpered as either a master or a slave when there is no other drive on the cable with it. If the drive is the only drive on the cable, then remove the jumper from the drive. -
Hello
I fitted a Samsung SSD to my xw6400, after updating the BIOS and applying the BIOS settings outlined elsewhere. I never did manage to get AHCI Mode actuivated, even after doing a complete reinstall of Windows 8 and 8.1, but the performance boost is quite good enough without it.
My concern is that sometimes when I restart the machine from Windows, it will fail to detect the SSD, which is the system drive. It doesn't happen often and it's not a big deal anyway, since, if I switch off and on again, it does always discover it at power-on. This may prove to be a problem, though, if I'm away from home and need to access the machine remotely. Of course, I could avoid it by switching off Windows automatic updates before I leave home, but the problem is being old, so I will probably forget.
Does anyone have any ideas how I can remedy this?
Thanks in advance.Hi:
If you are using a SATA III SSD, this may be the problem...
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?javax.portlet.begCach...
I had the same thing happen to me on my dc7800 CMT when I installed a SATA III WD mechanical hard drive.
When I put the HP 1 TB Seagate hard drive from my HP 8200 Elite into the dc7800, it worked just fine as did the WD SATA III drive in my 8200 Elite.
Maybe you are looking for
-
Ive gone to icloud.com, logged in and attempted to turn off the "lost mode", dont know the exact word for it in english. Anyways now its been saying for quite some time, "Waiting: Turn off lost mode", like its waiting for another process to finish. I
-
Using and analyzing maintenance 3.8 log
I read recently that this program shouldnt actually be used often or mostly at all. It seems when I get frequent program crashes it has fixed them up, but I have never been able decipher or understand the log file that comes with it. If anyone can he
-
Deploy Java Web Dynpro to the portal
Hi Gurus, I've done a simple java web dynpro in my local PC. How do I deploy it to the portal? Thanks! Best regards, Anthony
-
Can HA-Oracle agent distinguish a failed database from an inactive one?
I read "Oracle and Sun Cluster:A technical Overview" by Joseph Bianco. It says "The HA-Oracle agent can distinguish a failed database from an inactive one". How do we configure HA-Oracle agent to be smart enough to distinguish normal shutdown (due to
-
Put mov.type 632 relevant to QM when goods is returning to the plant.
Dear friends , We made a process to send goods to the vendor fix this good via SD with an sales order with movement type 631 (customer consignment) because the clerk want to see this specific goods in special stock. Now the clerk want to put this goo