Failure to find path error

I trying to build my first single edition app. everything seems to going fine until the last screen "create app". When I click that I get this error: Failure to find path:/users/mycomputer/library/preferences/stagemanager.BD092818F67280F4B42B04877600987F1 11B594.1/Local Store/dmp/(publication name here)_2012_9_8_11_25_26/(publication name. Can anyone help figure out this error? What does it mean Local Store? I am a Adobe Cloud member. Do I still have to get a single edition serial number?
thanks
Chuck

I just wanted to post here in case anyone else has this same problem that trashing the #SharedObjets and dmp folders in the Library Preferences directory resolved this for me.
Chuck

Similar Messages

How can I open my file after 'cannot find -filename-' error message?

OK, the bottom line is, InDesign crashes and I cannot recover my file. I get a 'Cannot find file' error message when I try to open the file.
I am using CS6 on a MacBookAir, OS X Yosemite.
I have tried finding the 'InDesignFileRecovery' folder, I cannot find it anywhere, it's not in my Library or Caches folder.
However, I do work in dropbox, so I just headed over to dropbox to recover from their 'previous versions'. It starts to get weird. There are lots of previous versions (I save very regularly) but when I download a previous version (that I know was fine) it downloads with a indd.txt extension. So I remove the txt extension and keep the indd and everything looks fine, but then that recovered file gives the same message. I tried renaming the recovered file and opening that, same 'cannot find file' error message.
I can open InDesign and open the file from the day before, but none of the dropbox earlier versions of that day's work. I am SO sick of this happening. It happened to me last week to, so far I have lost 20 hours work :-(
I have tried quitting InDesign and restarting the Mac, doesn't help. The only thing I can think of is to 'save as' every couple of hours, at least then hopefully I only lose 2 hours work.

Thanks, when you say 'hidden by default' then how does one find it? I have already tried the path you mention and there is no sign of a cache folder with Adobe files. Spotlight doesn't reveal anything either.

HELP! How can i restore/recover files from Bootcamp with Boot Failure - Missing operating system error?

Hi,
I am having a few problems with bootcamp on my imac. When i tried to move the bootcamp partition on windows 7 into free space, it crashed and turned off. Ever since i have had the error 'Missing operating system' and it fails to boot. I have some very important files on the bootcamp partition. Is it possible to recover these files or even to restore the bootcamp partition to it's original state? I do not have a backup of my bootcamp partition. Another problem i have is that ever since i tried to expand my macintosh HD partition into free space, when i hold alt while booting up (to choose which partition to boot like i normally do), the bootcamp partition has stopped appearing. This means that i cannot even boot the windows 7 bootcamp partition anymore!
So basically here are my 2 questions:
How can i restore/recover files from Bootcamp with Boot Failure - Missing operating system error?
How can i make the Bootcamp partition appear in Startup Disk and when i hold the option key while starting up my computer to allow me to boot windows 7?
Any solutions are very much apreciated!
Thanks!
I know that bootcamp (disk0s4) hasn't been fully deleted since it appears in disk utility (i cant do anything to it though)
And here is the error i see when i try to launch bootcamp (back when i was actually able to boot up bootcamp to the error screen)

WinClone 3 is OS X and saves Windows image it makes for restore - that should work but you will have to try and you would need to make a new image unless it also works with a native Windows system restore image. It is now supported and has come a long way.
http://www.twocanoes.com/
Paragon Clone OS works and does disk-to-disk clone just like CCC you end up with two bootable drives. But does not work with your setup. It would let you clone and move your Windows install to an SSD or another disk drive though and be bootable.
During its clone process it checks for errors which is very helpful and lets you know - something CCC and others should adopt more of.
http://www.paragon-software.com/downloads/demo.html
I wish for our/my sake you had re-read and rewritten the long 'story' and broken it into a brief list of facts we needed.
OS X
Windows
Backup (though external is much safer) and you want bootable OS X clones as well as TimeMachine
https://support.apple.com/kb/HT1427
https://support.apple.com/kb/HT1553
There are a number of things to do like chkdsk and others as well as Windows DVD to do automatic system repairs and find out why.
AppleHFS - the abilty to mount and read HFS volumes can be notorious.
I would rearrange and redo your storage setup and how you use the 4-5 internal hard drive bays.

Get-Item: Cannot find path ' ' because it does not exist. While running Powershell script.

I am trying to run a PowerShell script to upload files into a SharePoint site in an Azure environment...the script works fine on my local machine, but every time I run it in Azure (remotely), I get errors. Here is what my simple script looks like...
if ( (Get-PSSnapin -Name Microsoft.SharePoint.PowerShell -ErrorAction SilentlyContinue) -eq $null )
Write-Host "Loading Sharepoint Module "
[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint")
Add-PSSnapin -Name Microsoft.SharePoint.PowerShell
if ( (Get-PSSnapin -Name Microsoft.SharePoint.PowerShell) -eq $null )
Write-Host "Failed to load sharepoint snap-in. Could not proceed further, Aborting ..."
Exit
#Script settings
$webUrl = "http://sampleWebUrl"
$docLibraryName = "My Documents"
$docLibraryUrlName = "My%20Documents"
$localFolderPath = get-childitem "C:\Upload\Test Upload\My Documents\" -recurse
$contentType = "ContenttType1"
#Open web and library
$web = Get-SPWeb $webUrl
write-host "Web:" $web
$docLibrary = $web.Lists[$docLibraryName]
write-host "docLibrary:" $docLibrary
$files = ([System.IO.DirectoryInfo] (Get-Item $localFolderPath)).GetFiles()
write-host "files:" $files
If ($contentType = "ContenttType1")
#Open file
$fileStream = ([System.IO.FileInfo] (Get-Item $file.FullName)).OpenRead()
# Gather the file name
$FileName = $File.Name
#remove file extension
$NewName = [IO.Path]::GetFileNameWithoutExtension($FileName)
#split the file name by the "-" character
$FileNameArray = $NewName.split("_")
$check = $FileNameArray.Length
#Add file
$folder = $web.getfolder($docLibrary.rootFolder.URL)
write-host "Copying file " $file.Name " to " $folder.ServerRelativeUrl "..."
$spFile = $folder.Files.Add($folder.Url + "/" + $file.Name, [System.IO.Stream]$fileStream, $true)
$spItem = $spFile.Item
write-host "Success"
write-host "SP File:" $spFile
write-host "SP Item" $spItem
#populate columns
$spItem["Column1"] = $FileNameArray[0]
$spItem["Column2"] = $FileNameArray[1]
$spItem.Update()
$fileStream.Close();
Again, I can run this on my local machine and it works just fine, but when I attempt to run it on the Azure environment I get this error...
Get-Item : Cannot find path 'C:\powershellscripts\12653_B7045.PDF' because it does not exist.
At C:\PowerShellScripts\Upload-FilesIntoSharePointTester.ps1:32 char:42
+ $files = ([System.IO.DirectoryInfo] (Get-Item $localFolderPath)).GetFiles()
+ ~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (C:\powershellscripts\12653_B7045.PDF:String) [Get-Item], ItemNotFoundException
+ FullyQualifiedErrorId : PathNotFound,Microsoft.PowerShell.Commands.GetItemCommand
What strikes me first is the fact that the file its looking for is in the "C:\Upload\Test Upload\My Documents\" directory, but the error keeps saying "C:\powershellscripts\" which is where my script resides and not the files I want to
upload into SharePoint. When I step through the code, all the variables are holding the correct values. The $localFolderPath shows the name of files that I am attempting to upload, so it recognizes them. But once I step through this particular line of code,
the error occurs...
$files = ([System.IO.DirectoryInfo] (Get-Item $localFolderPath)).GetFiles()
Is this an error caused because I am remoting into the Azure environment? Has anyone dealt with this issue before? I would really appreciate the help. Thanks
Update: quick thing I noticed is that these two lines of code are returning null values. Again, is this handled differently in Azure or remotely? I ask cause this is the way I know how to do this, locally.
$docLibrary = $web.Lists[$docLibraryName]
$files = ([System.IO.DirectoryInfo] (Get-Item $localFolderPath)).GetFiles()

"...square brackets are wildcard characters in Windows PowerShell..."
When you use cd without a parameter it uses the -Path parameter. In this case you'll have to escape the square brackets so they are not considered wildcards. Each of the commands in the first example does the exact same thing.
cd 'Learn PowerShell `[Do Whatever`]'
cd -Path 'Learn PowerShell `[Do Whatever`]'
cd (or Set-Location) also has a literal path parameter (-LiteralPath) that does not require using an escape character (`) before each of the brackets. Hope this helps.
cd -LiteralPath 'Learn PowerShell [Do Whatever]'

SQL Developer: Failure -Test failed: IO Error: Got minus one from a read ca

SQL Developer: Failure -Test failed: IO Error: Got minus one from a read call
Hi,
I am sorry I know this is probably most frequently asked question, but I have no idea what I should be searching for.
I looked up the error above to see if i could find a solution, but unfortunately I did not.
Right Let me start of with I am a Total Noob.. well it terms of having to install Oracle 11g myself.
In my University they hosted a database, and assigned us a User & pass thats how I have been using SQL Developer,
but since I am not longer a university student. I need to use Oracle Database.
So I downloaded Oracle 11g Enterprise Installed it on my laptop that i don't use much.
Name the Database: Rudu
It did all the installation, and seemed to have succeeded, I went on to the https://localhost:1158/em (Though am not sure why em? whats the deal with that? I thought it would be https://localhost:1158/Rudu) anyways....
Logged in using the System user.
Went to Users and created a user called: RUDUHR
Thought yeah its working... went on to my other laptop opened up SQL Developer.
Created Connection with the following Settings
Con Name: RK
User: RUDUHR
Pass: TEST
Con Type: Basic
Role: Default
Hostname: 192.168.0.8
Port: 1158
SID: Rudu
It don't work though Why is that??????
192.168.0.8 is laptop that has oracle 11g installed and running.
I even tried using SYSTEM user to connect, but same error
also tried changing SID to em, it made no difference I keep getting the error Status: Failure -Test failed: IO Error: Got minus one from a read call
So ya am clueless... LOL I only know how to create tables and stuff not how to configure a Database.
and just so you know I did forward the port on me router to correct laptop.

It don't work though Why is that??????
192.168.0.8 is laptop that has oracle 11g installed and running.
It is because you don't read documentation.
1158 is the default port for Enterprise Manager
1521 is the default port for Sqlnet.
Your port number is incorrect.
Needless to say, you can create your tables in EM too.
As per the Forums Etiquette post (first link when you get to this page) it is recommended you read documentation before asking Yet Another Doc Question.
Sybrand Bakker
Senior Oracle DBA

Error while loading services: Failure in Loader: VerifyError: Error #1014

I have a library that, after it loads, I see this error in the console:
Failure in Loader: VerifyError: Error #1014: Class mx.collections::ArrayCollection could not be found.
I had the same problem with another library, except it had a problem with IToken. I got around this problem by changing the default linkage of libraries in build path from external to merge into code. That did not work this time.
Merging Flex libraries into service libraries does not seem to be anything close to the correct way to deal with this. Besides, it didn't some the problem every time.
What is the best way to keep these sorts of dependency errors from arising? The RSLs are included with Web apps, but not with libraries.

I have found what happened.
I created a library and created a data model within it. I created some entities within the data model. Some of those entities had collections as properties. I created the ActionScript code for the model and the collections were ArrayCollections. I moved the interfaces of the created code to a separate library.
The interfaces need to be changed from using ArrayCollection to IList. I knew enough about that to change it for the service I was trying to bring into my application. I missed another interface that had ArrayCollections as properties and that caused the error.
After cleaning up all of the ArrayCollection references from the interface library my service loaded.
The Hello Gravity video tutorial has a very good explanation on why specific implementations of Flex classes are not used in service interfaces: http://blogs.adobe.com/gravity/2011/09/09/hellogravity-sample-application/

Starting weblogic 6.0(for unix) but I find a error.

Hi! everyone.
Env:
OS: Solaris 8 for IA (OEM Support)
JDK: Sun JDK 1.3.1
WebAppServer: WebLogic server 6.0
C compiler: gcc 2.95.2
I install weblogic 6.0 on my OS. when I starting weblogic 6.0,I find a
error:
####<2001-11-15 ÉÏÎç08Ê±53·Ö56Ãë> <Notice> <WebLogicServer> <www1> <www1>
<Liste
nThread> <system> <> <000202> <ListenThread listening on port 7001>
####<2001-11-15 ÉÏÎç08Ê±53·Ö56Ãë> <Notice> <WebLogicServer> <www1> <www1>
<main>
<system> <> <000216> <WebLogic Server started>
####<2001-11-15 ÉÏÎç08Ê±53·Ö56Ãë> <Error> <Performance Pack> <www1> <www1>
<List
enThread> <system> <> <000000> <Unable to load performance pack, using Java
I/O.
>
java.lang.UnsatisfiedLinkError:
/export/home/BEA/wlserver6.0/lib/solaris/libmuxe
r.so: ld.so.1: /usr/java/jre/bin/../bin/i386/native_threads/java: ???¨¹??:
/expo
rt/home/BEA/wlserver6.0/lib/solaris/libmuxer.so: wrong ELF data format:
ELFDATA2
MSB
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1382)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1306)
at java.lang.Runtime.loadLibrary0(Runtime.java:749)
at java.lang.System.loadLibrary(System.java:820)
at weblogic.socket.PosixSocketMuxer.<init>(PosixSocketMuxer.java:90)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:237)
at weblogic.socket.SocketMuxer.makeTheMuxer(SocketMuxer.java:128)
at weblogic.socket.SocketMuxer.getMuxer(SocketMuxer.java:83)
at weblogic.t3.srvr.ListenThread.run(ListenThread.java:221)
####<2001-11-15 ÉÏÎç08Ê±53·Ö56Ãë> <Notice> <WebLogicServer> <www1> <www1>
<SSLLi
stenThread> <system> <> <000202> <SSLListenThread listening on port 7002>
Thanks!

Sunday,
Check to ensure that the path for this file is right and that it is actually installed
, and
Set "weblogic.system.nativeIO.enable=true" in your weblogic.properties file.
"Sunday" <[email protected]> wrote:
Hi! everyone.
Env:
OS: Solaris 8 for IA (OEM Support)
JDK: Sun JDK 1.3.1
WebAppServer: WebLogic server 6.0
C compiler: gcc 2.95.2
I install weblogic 6.0 on my OS. when I starting weblogic 6.0,I find
a
error:
####<2001-11-15 ÉÏÎç08Ê±53·Ö56Ãë> <Notice> <WebLogicServer> <www1> <www1>
<Liste
nThread> <system> <> <000202> <ListenThread listening on port 7001>
####<2001-11-15 ÉÏÎç08Ê±53·Ö56Ãë> <Notice> <WebLogicServer> <www1> <www1>
<main>
<system> <> <000216> <WebLogic Server started>
####<2001-11-15 ÉÏÎç08Ê±53·Ö56Ãë> <Error> <Performance Pack> <www1> <www1>
<List
enThread> <system> <> <000000> <Unable to load performance pack, using
Java
I/O.
>
java.lang.UnsatisfiedLinkError:
/export/home/BEA/wlserver6.0/lib/solaris/libmuxe
r.so: ld.so.1: /usr/java/jre/bin/../bin/i386/native_threads/java: ???¨¹??:
/expo
rt/home/BEA/wlserver6.0/lib/solaris/libmuxer.so: wrong ELF data format:
ELFDATA2
MSB
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1382)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1306)
at java.lang.Runtime.loadLibrary0(Runtime.java:749)
at java.lang.System.loadLibrary(System.java:820)
at weblogic.socket.PosixSocketMuxer.<init>(PosixSocketMuxer.java:90)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:237)
at weblogic.socket.SocketMuxer.makeTheMuxer(SocketMuxer.java:128)
at weblogic.socket.SocketMuxer.getMuxer(SocketMuxer.java:83)
at weblogic.t3.srvr.ListenThread.run(ListenThread.java:221)
####<2001-11-15 ÉÏÎç08Ê±53·Ö56Ãë> <Notice> <WebLogicServer> <www1> <www1>
<SSLLi
stenThread> <system> <> <000202> <SSLListenThread listening on port 7002>
Thanks!

Get Plugin Finding Service Error for weeks & weeks now - can't update plug-ins, need download .pdf doc, but says adobe unstable, plug-in needs update. now what

Want to download .pdf doc, but pop-up says it's unstable, need update plug-in. Tried to update, got error message, with "try later". Same for weeks now. Tried check for updates, Firefox is up to date, clicked update plug-ins... it tries, then again... same error message: "Plugin Finding Service Error. Please try again later".
Been so long now -- when becomes a mighty big question. Looked in forum, no joy.
Please, can someone tell me -- what's the go. I'm absolutely no good with computers, but this needs to get fixed. Should I stop using Firefox or what?
Thanks for your help.
Happy 2013 to all.
PS. (added a couple days later)
I'm told I should have added my next question in reply to TylerDowner here, instead of as I did. Sorry if that's so (really?) but I didn't even realize I could edit this.
So... TylerDowner, thanks very much for your reply, and please would you -- or anyone else who might be able to help -- see my first reply to you below. (seems a waste to slot in here again)
Feelin even dumber, (ha-ha)
raaraa

Tylerdowner -- >> thank you << for your reply, and my sincere apologies for this delayed response (probs, hospital, blah-blah, you don't want to know).
Have tried to download via that link but not sure if successful. Very slow dial-up connection is the pits. Waited hours 'n hours, fell asleep in chair even, finally had to give in and go to bed, left it going. Server does time out every 8-12 hours, so not sure how long it went. The download appeared complete -- ie, did not show any note of failure. Not sure if it would -- some things in the past haven't.
Anyway, had success downloading one much older .pdf file, but the link for one I wanted had expired, and I don't know anything else to try. Tried a couple of other links I have, not sure of age of file -- on clicking link, the browser opened, but nothing more happened.
Wondering -- is the download available in separate pieces instead of one big one? Perhaps worth trying again that way?
Please, if you would be forgiving, and persist with me a little further/longer -- would you make your recommendation/s for next step/s please?
Hope you're in a safe, comfortable place. So many places in the world suffering with extremes of all kinds.
R...

Suddenly my Appleworks 6.29 wont open on my Mac G4 sys 10.4.11. Error message is: Application Launch Failure. Shared Library Error. Appleworks MW_MSL_PPC SHLB Interfacelib "

suddenly my Appleworks 6.29 wont open on my Mac G4 sys 10.4.11. Error message is: Application Launch Failure. Shared Library Error. <Appleworks><MW_MSL_PPC>SHLB><Interfacelib><>"

Hello,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive & clear caches.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If that doesn't help...
Open Console in Utilities & see if there are any clues or repeating messages when trying to open AW6.

Class path Error urgent Plz

Hi Guys,
I was trying to write an WD application to check connector connectivity in EP, I have included these jar files in class path "com.sap.portal.ivs.connectorservice_api.jar" and "GenericConnector.jar".
The codes are like
IConnection connection = null;
IConnectorService cs = (IConnectorService) PortalRuntime.getRuntimeResources().getService(IConnectorService.KEY);
IConnectorGatewayService cgs = cs.getIConnectorGatewayService();
connection = cgs.getconnection(Alias,request)
but as soon as I write this last line getconnection() I get error which is "Compilation unit indirectly references the missing type com.sap.portal.services.api.connectorgateway.IConnectorGatewayService(typically some required class file is referencing a type outside the class path)"
and this given below error comes when I build the project.
"The project was not built since its classpath is incomplete. Cannot find the class file for com.sap.portal.services.api.connectorgateway.IConnectorGatewayService. Fix the classpath then try rebuilding this project."
can any one please tell me how can I fix this problem.
Thanks in advance
Best Regards
Yasir Noman
Message was edited by: Yasir Noman

Hi,
I am facing the problem of class path errors.
my error is :
*Error: Missing required library: 'C:Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.security2.0.0/lib/com.sap.security.api.jar'.*_
And when I checkd on the program file \ lib folder there is .jar file.
And the second error is
Error: The project was not built due to classpath errors (incomplete or involved in cycle).
I tried to rebuild it and also repair it with project structure and classpath. so that it can find the missing libraries.
I checked it out in the properties of the project in Java Build path it is showing an error of build path entry is missing
Please can anyone help on this error.
I am stuck on this error for past a long time.
Please Reply asap.

Class path error in connection to jdbc system

Dear all,
I m trying to create a jdbc conection to access the a system "jdbc" in the portal database.I have included four jar files namely
Generic connector.jar
Helper.jar
Extended connector.jar
com.sap.portal.ivs.connectionserviceapi.jar
bt still i m getting a class path error.the error says
"The project was not built since its classpath is incomplete. Cannot find the class file for com.sap.portal.services.api.connectorgateway.IConnectorGatewayService."
Can anyone help me resolve this error.
Regards
Shaila

Hi Shila,
Actually Portal runs on Web Application server.The server does not know any details about R/3 system which you want to connect. for that first you have to configur Your J2ee Engine And than Proceed.
for configuring J2ee Engine see ths notes.
<a href="http://help.sap.com/saphelp_nw70/helpdata/en/93/8aea385252494d9b1eb92e0b7f1bad/content.htm">Notes</a>
and go through thease links it will be full to you...
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6209b52e-0401-0010-6a9f-d40ec3a09424
http://help.sap.com/saphelp_nw04s/helpdata/en/5e/4d48b62fe54c23a8dbef364a289d8f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/93/8aea385252494d9b1eb92e0b7f1bad/frameset.htm
Reward Points if Helpfull.
Regards
Vinit

Task sequence failure - Cannot find file

Guys,
My TS to deploy an OS ends in failure. The main error seems to be The system cannot find the file specified. (Error: 80070002
I have attached a copy of the smsts.log. Does anyone have any ideas ?
The OS, boot and packages have all been distributed successfully. I have also attached a screen shot of my TS

unknown host (gethostbyname failed) ApplyOperatingSystem
9/23/2014 2:10:20 PM 1172 (0x0494)
hr, HRESULT=80072ee7 (e:\nts_sccm_release\sms\framework\osdmessaging\libsmsmessaging.cpp,8919)
ApplyOperatingSystem 9/23/2014 2:10:20 PM
1172 (0x0494)
sending with winhttp failed; 80072ee7 ApplyOperatingSystem
9/23/2014 2:10:20 PM 1172 (0x0494)
oHttpTransport.Send ((char *) S_DAVQUERY, (sizeof(S_DAVQUERY)/sizeof(S_DAVQUERY[0])) - sizeof(char), pReply, nReplySize), HRESULT=80072ee7 (e:\nts_sccm_release\sms\framework\tscore\downloadcontent.cpp,799)
ApplyOperatingSystem 9/23/2014 2:10:20 PM
1172 (0x0494)
SendResourceRequest() failed. 80072ee7 ApplyOperatingSystem
9/23/2014 2:10:20 PM 1172 (0x0494)
SendResourceRequest(), HRESULT=80072ee7 (e:\nts_sccm_release\sms\framework\tscore\downloadcontent.cpp,516)
ApplyOperatingSystem 9/23/2014 2:10:20 PM
1172 (0x0494)
oDavRequest.GetDirectoryListing (setDirs, setFiles), HRESULT=80072ee7 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,2516)
ApplyOperatingSystem 9/23/2014 2:10:20 PM
1172 (0x0494)
Download() failed. 80072ee7. ApplyOperatingSystem
9/23/2014 2:10:20 PM 1172 (0x0494)
DownloadContentAndVerifyHash() failed. 80070002.
ApplyOperatingSystem 9/23/2014 2:10:20 PM
1172 (0x0494)
DownloadContentAndVerifyHash ( pszPackageID, L"SMSPackage", saHttpContentSources, saSMBContentSources, saMulticastContentSources, sDestination, dwFlags, L"", 0, dwPackageFlags, mapNetworkAccess ), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,3052)
ApplyOperatingSystem 9/23/2014 2:10:20 PM
1172 (0x0494)
DownloadContentLocally (pszSource, sSourceDirectory, dwFlags, hUserToken, mapNetworkAccess), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,3273)
ApplyOperatingSystem 9/23/2014 2:10:20 PM
1172 (0x0494)
TS::Utility::ResolveSource( this->packageID, this->packagePath, TS::Utility::ResolveSourceFlags::PersistContents | (this->forceRunFromNet ? TS::Utility::ResolveSourceFlags::ForceRunFromNet : 0) ), HRESULT=80070002 (e:\nts_sccm_release\sms\client\osdeployment\applyos\installimage.cpp,1767)
ApplyOperatingSystem 9/23/2014 2:10:20 PM
1172 (0x0494)
resolvePkgSource(), HRESULT=80070002 (e:\nts_sccm_release\sms\client\osdeployment\applyos\installimage.cpp,1810)
ApplyOperatingSystem 9/23/2014 2:10:20 PM
1172 (0x0494)
Apply(), HRESULT=80070002 (e:\nts_sccm_release\sms\client\osdeployment\applyos\installimage.cpp,2019)
ApplyOperatingSystem 9/23/2014 2:10:20 PM
1172 (0x0494)
Installation of image 1 in package CCM0001C failed to complete..
The system cannot find the file specified. (Error: 80070002; Source: Windows)
ApplyOperatingSystem 9/23/2014 2:10:20 PM
1172 (0x0494)
installer.install(), HRESULT=80070002 (e:\nts_sccm_release\sms\client\osdeployment\applyos\installimage.cpp,2094)
ApplyOperatingSystem 9/23/2014 2:10:20 PM
1172 (0x0494)
ReleaseSource() for C:\_SMSTaskSequence\Packages\CCM0001C.
ApplyOperatingSystem 9/23/2014 2:10:21 PM
1172 (0x0494)
The user tries to release a source directory C:\_SMSTaskSequence\Packages\CCM0001C that is either already released or we have not connected to it.
ApplyOperatingSystem 9/23/2014 2:10:21 PM
1172 (0x0494)
InstallImage( g_InstallPackageID, g_ImageIndex, targetVolume, ImageType_OS, g_ConfigPackageID, g_ConfigFileName, bOEMMedia, g_RunFromNet ), HRESULT=80070002 (e:\nts_sccm_release\sms\client\osdeployment\applyos\applyos.cpp,509)
ApplyOperatingSystem 9/23/2014 2:10:21 PM
1172 (0x0494)
Process completed with exit code 2147942402
TSManager 9/23/2014 2:10:21 PM
1076 (0x0434)
TSManager 9/23/2014 2:10:21 PM
1076 (0x0434)
Failed to run the action: Apply Operating System.
The system cannot find the file specified. (Error: 80070002; Source: Windows)
TSManager 9/23/2014 2:10:21 PM
1076 (0x0434)
MP server .org. Ports 80,443. CRL=false. TSManager
9/23/2014 2:10:21 PM 1076 (0x0434)
Setting authenticator TSManager
9/23/2014 2:10:21 PM 1076 (0x0434)
Set authenticator in transport TSManager
9/23/2014 2:10:21 PM 1076 (0x0434)
Sending StatusMessage TSManager
9/23/2014 2:10:21 PM 1076 (0x0434)
Setting message signatures. TSManager
9/23/2014 2:10:21 PM 1076 (0x0434)
Setting the authenticator. TSManager
9/23/2014 2:10:21 PM 1076 (0x0434)
CLibSMSMessageWinHttpTransport::Send: URL: .org:80 CCM_POST /ccm_system/request
TSManager 9/23/2014 2:10:21 PM
1076 (0x0434)
Error. Received 0x80072ee7 from WinHttpSendRequest.
TSManager 9/23/2014 2:10:21 PM
1076 (0x0434)
unknown host (gethostbyname failed) TSManager
9/23/2014 2:10:21 PM 1076 (0x0434)
hr, HRESULT=80072ee7 (e:\nts_sccm_release\sms\framework\osdmessaging\libsmsmessaging.cpp,8919)
TSManager 9/23/2014 2:10:21 PM
1076 (0x0434)
sending with winhttp failed; 80072ee7 TSManager
9/23/2014 2:10:21 PM 1076 (0x0434)

Incorrect Path Error - iCal Server 10.6

Hi everyone, hope you can help.
Another problem to add to the iCal server pile...
To workaround the lack of group calendar functionality, I have created a 'special' user which several staff members use to log into iCal server. This way, all staff can view and edit the same calendar data.
I configured all the Macs using iCal's automatic account creation process, and everything authenticated and worked just fine for a couple of days.
However, we then all received an iCal error advising that we check the server path to the shared calendar. It has been trying to look in here:
/principals/_uids_/<UUID of user>
I have confirmed that the UUID in the above path is consistent and correct with the 'special' user mentioned before. So... why does it work for a couple of days then fail?
I have tried removing and re-adding the account, again the error only comes up a day or two later.
*Additional Info*
I cannot find the principals folder referenced above. However, I do have the following:
Server HD/Library/CalendarServer/Documents/calendars/_uids_/1E/E2/<UUID of user>
This looked strangely similar. Using terminal, I copied the UUID folder in the above path into the _uids_ directory, and that seems to have provided a temporary fix to the problem. However, iCal is still configured to look in the principals directory, not the calendars directory that I seem to have modified.
Any thoughts?
Thanks in advance!

Agreed - I also suspected it had something to do with a software update.
Still this does not fully explain the fact I cannot find the principals directory referenced in the path error. Does anybody know where this would be located on the server's HD?
At some point soon I will run a clean Snow Leopard client install back to plain 10.6 to see if I can connect to the iCal server without the error. Will also run the combo 10.6.2 updater to see if we can narrow down which update triggered the problem, if any.
If anyone could shed light on the 'principals' path it would be useful.
Oh, also, it's worth mentioning my OS X Server is not running Open Directory. All users are registered locally on the machine rather than in the LDAP domain.
Message was edited by: jimbo2k

Restore fails with "Firmware update failure. Disk write Error" message

I am going totally bonkers with this one. My Shuffle stopped working suddenly.
My iTunes was not able to read the contents of the iPOD and there seems to be a corrupt filesystem. After reviewing various posts, I have tried the following with little success:
1. Tried Restore using the Updater tool that came with the Shuffle (2005-09-23). I kept getting the "Firmware update failure. Disk write Error"
2. Downloaded the new updater tool (2006-03-23) and tried restore again. I got the same error message again.
3. Tried formatting using Windows format, it is not able to complete the format
4. Tried chkdsk. Get an error message saying "CHKDSK is not available for RAW drives."
5. Tried connecting it to a different computer and tried pretty much the same steps. Similar results.
I am using USB 2.0 both on my current Thinkpad as well as the other computer I tried with.
I am totally clueless and am not sure how to go about fixing this one. Though there have been lots of posts about this, I haven't been able to find a solution that works for me. Any thing else that I may have missed out which I can try?
Thanks,
Kris
Thinkpad Windows XP Pro

hiya!
just checking. have you worked through the possibilities from this document yet?
"Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod
given that you're connecting to a laptop, we'd better check on this possibility too:
iPod not recognized when connected to Windows laptop over USB
... and even though you aren't using a Toshiba, this technique might be worth a try (if all else fails):
iPod not recognized correctly on Toshiba laptop
love, b

Not able to find the Error in code !

please help me to find the error in my code. When I Added x1~kondm its not giving anything i.e
*join t178t as x1
*on   p1kondm = x1kondm
in the SQL part !
REPORT YINTERACTIVEPROGRAM01.
TABLES:VBAP,
       VBPA,
       VBRP,
       VBRK,
       KNA1,
       ADRC,
       TPAR,
       TVKGG,
       TVM1T,
       TVM2T,
       TVM3T,
       TVM4T,
       VBKD,
       SZA1_D0100,
       T178T.
TYPES:BEGIN OF TY_TAB,
         VBELN LIKE VBAK-VBELN,
         VKORG LIKE VBAK-VKORG,
         ERDAT LIKE VBAK-ERDAT,
         AUGRU LIKE VBAK-AUGRU,
         BSTDK LIKE VBKD-BSTDK,
         BSTDK_E LIKE VBKD-BSTDK_E,
         spart like vbap-spart,
         kondm like vbap-kondm,
         waerk like vbap-waerk,
         netwr like vbap-netwr,
         kwmeng like vbap-kwmeng,
         vkaus like vbap-vkaus,
         land1 like vbpa-land1,
         nrart like tpar-nrart,
       vtext like tpar-vtext,
         parvw like tpar-parvw,
         name1 like adrc-name1,
         name2 like adrc-name2,
         name3 like adrc-name3,
         name4 like adrc-name4,
         ort01 like kna1-ort01,
         pstlz like kna1-pstlz,
         vtext like t178t-vtext,
      END OF TY_TAB.
DATA: ITAB TYPE STANDARD TABLE OF TY_TAB WITH HEADER LINE.
parameters:salesno like itab-vbeln.
select s1~vbeln
       s1~vkorg
       s1~erdat
       s1~augru
       k1~BSTDK
       k1~BSTDK_E
       p1~spart
       p1~kondm
       p1~waerk
       p1~netwr
       p1~kwmeng
       p1~vkaus
       r1~land1
       t1~nrart
      t1~vtext
       t1~parvw
       n1~name1
       n1~name2
       n1~name3
       n1~name4
       c1~ort01
       c1~pstlz
       x1~vtext
into corresponding fields of table itab
from vbak as s1
join VBKD as k1
on   s1vbeln = k1VBELN
join vbap as p1
on   k1vbeln = p1vbeln
*join t178t as x1
*on   p1kondm = x1kondm
join vbpa as r1
on   p1vbeln = r1vbeln
join tpar as t1
on   r1parvw = t1parvw
join ADRC as n1
on   r1adrnr = n1addrnumber
join kna1 as c1
on   r1land1 = c1land1
where k1vbeln = salesno and s1vbeln = salesno and p1~vbeln = salesno
and r1~vbeln = salesno.
loop AT ITAB.
WRITE : /(30)'VBELN: ', ITAB-VBELN,
          /(30)'VKORG: ', ITAB-VKORG,
          /(30)'ERDAT: ', ITAB-ERDAT,
          /(30)'AUGRU: ', ITAB-AUGRU,
          /(30)'BSTDK: ', ITAB-BSTDK,
          /(30)'BSTDK_E:', ITAB-BSTDK_E,
          /(30)'SPART: ', itab-spart,
          /(30)'KONDM: ', itab-kondm,
          /(30)'WAERK: ', itab-waerk,
          /(18)'NETWR: ' , itab-netwr,
          /(18)'KWMENG: ', itab-kwmeng,
          /(10)'VKAUS:',   itab-vkaus,
          /(30)'LAND1:',   itab-land1,
          /(30)'NRART:',   itab-nrart,
          /(30)'PARVW:',   itab-parvw,
          /(30)'ADDR1:',   itab-name1,
          /(30)'ADDR2:',   itab-name2,
          /(30)'ADDR3:',   itab-name3,
          /(30)'ADDR4:',   itab-name4,
          /(30)'PSTLZ:',   itab-pstlz,
          /(30)'ORT01:',   itab-ort01,
          /(30)'Compiler desc:',   itab-vtext.
           uline.
ENDLOOP.
            if sy-subrc <> 0.
            write : / 'No data found'.
            endif.

hi,
u failed to check relationship between tables and as well as mandatory fields need to be checked, i noticed following
from vbak as s1
join VBKD as k1
on s1vbeln = k1VBELN
join vbap as p1
on k1vbeln = p1vbeln and k1posnr = p1posnr
*join t178t as x1
*on p1kondm = x1kondm
join vbpa as r1
on p1vbeln = r1vbeln   <b>and p1posnt = r1posnr </b> join tpar as t1
on r1parvw = t1parvw
join ADRC as n1
on r1adrnr = n1addrnumber     <b> * No relation between these two tables/b]
join kna1 as c1
on r1land1 = c1land1 <b>and r1kunnr = c1kunnr</b> <i>'here u need to check mandatory fields also</i>
where k1vbeln = salesno and s1vbeln = salesno and p1~vbeln = salesno
and r1~vbeln = salesno.
anyway, in performance point of view, writeing code with this much joins is not acceptable.
comeback if you need any further help
regards,
pavan
Message was edited by:
        pavan kumar pisipati

Failure to find path error

Similar Messages

Maybe you are looking for