FAQS on Performance Tuning

Can I have some FAQ's on Performance Tuning....

Hi Venkat,
Please refer the link,
performance tuning
Regards,
Hema.
Reward points if it is useful.

Similar Messages

BDB Performance Tuning.

Hello All,
In efforts to tune BDB JE's performance, I'd like to ask everyone what sort of things you have looked at and tried. The application looks like this: it has multi-threaded reads/writes with large number of small entries. One thread for writing and another for reading. Most the performance tuning is needed on writing to the database, preferably to support stable insertion/modification times. Each entry is no more than 4KB (keys and entries are constant size)
Some research indicates that changing page size to be equal to the size of the entry is helpful. I've looked at this: http://www.oracle.com/technology/documentation/berkeley-db/db/gsg/JAVA/dbconfig.html#pagesize
However, DatabaseConfig.setPageSize() is nowhere to be found. Am I missing something? Where can I access this setting?
I've also been having problems with database grinding to a near halt with large amounts of entries (under 1 mil) and total database file size of about 800MB. What are the general suggestions/practices for speeding things up? In this case performance is preferred over memory use.
Thank you,
Mike.

Hi Mike,
Some research indicates that changing page size to be
equal to the size of the entry is helpful. I've
looked at this:
http://www.oracle.com/technology/documentation/berkele
y-db/db/gsg/JAVA/dbconfig.html#pagesize
However, DatabaseConfig.setPageSize() is nowhere to
be found. Am I missing something? Where can I access
this setting?You're looking at the docs for the wrong product -- that's the C product. The JE docs are here:
http://www.oracle.com/technology/documentation/berkeley-db/je
(Note the je suffix as opposed to the db suffix, which is the C product.)
I've also been having problems with database grinding
to a near halt with large amounts of entries (under 1
mil) and total database file size of about 800MB.
What are the general suggestions/practices for
speeding things up? In this case performance is
preferred over memory use.Have you tried increasing the JE cache size (EnvironmentConfig.setCacheSize)? In general, databases perform better with more memory. But to do performance tuning the first step is to normally print out the EnvironmentStats periodically and correlate changes in the stats with the performance you're seeing. Please see the performance section of the JE FAQ:
http://www.oracle.com/technology/products/berkeley-db/faq/je_faq.html
--mark

Performance Tuning - Suggestions

Hi,
I have an ABAP (Interactive List) Program times out in PRD very often. The ABAP run time is about 99%. The DB time is less than 1%. All the select statements has the table index in place. Actually it isprocessing all the Production Orders (Released but not Confirmed/Closed). Please let me know if you have any suggestion.
Appreciate Your Help.
Thanks,
Kannan.

Hi
1) Dont use nested select statements
2) If possible use for all entries in addition
3) In the where addition make sure you give all the primary key
4) Use Index for the selection criteria.
5) You can also use inner joins
6) You can try to put the data from the first select statement into an Itab and then in order to select the data from the second table use for all entries in.
7) Use the runtime analysis SE30 and SQL Trace (ST05) to identify the performance and also to identify where the load is heavy, so that you can change the code accordingly
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d0db4c9-0e01-0010-b68f-9b1408d5f234
ABAP performance depends upon various factors and in devicded in three parts:
1. Database
2. ABAP
3. System
Run Any program using SE30 (performance analys) to improve performance refer to tips and trics section of SE30, Always remember that ABAP perfirmance is improved when there is least load on Database.
u can get an interactive grap in SE30 regarding this with a file.
also if u find runtime of parts of codes then use :
Switch on RTA Dynamically within ABAP Code
*To turn runtim analysis on within ABAP code insert the following code
SET RUN TIME ANALYZER ON.
*To turn runtim analysis off within ABAP code insert the following code
SET RUN TIME ANALYZER OFF.
Always check the driver internal tables is not empty, while using FOR ALL ENTRIES
Avoid for all entries in JOINS
Try to avoid joins and use FOR ALL ENTRIES.
Try to restrict the joins to 1 level only ie only for tables
Avoid using Select *.
Avoid having multiple Selects from the same table in the same object.
Try to minimize the number of variables to save memory.
The sequence of fields in 'where clause' must be as per primary/secondary index ( if any)
Avoid creation of index as far as possible
Avoid operators like <>, > , < & like % in where clause conditions
Avoid select/select single statements in loops.
Try to use 'binary search' in READ internal table. Ensure table is sorted before using BINARY SEARCH.
Avoid using aggregate functions (SUM, MAX etc) in selects ( GROUP BY , HAVING,)
Avoid using ORDER BY in selects
Avoid Nested Selects
Avoid Nested Loops of Internal Tables
Try to use FIELD SYMBOLS.
Try to avoid into Corresponding Fields of
Avoid using Select Distinct, Use DELETE ADJACENT
Check the following Links
Re: performance tuning
Re: Performance tuning of program
http://www.sapgenie.com/abap/performance.htm
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
check the below link
http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
See the following link if it's any help:
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
Check also http://service.sap.com/performance
and
books like
http://www.sap-press.com/product.cfm?account=&product=H951
http://www.sap-press.com/product.cfm?account=&product=H973
http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
Performance tuning for Data Selection Statement
http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
Debugger
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
Run Time Analyser
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617cafe68c11d2b2ab080009b43351/content.htm
SQL trace
http://help.sap.com/saphelp_47x200/helpdata/en/d1/801f7c454211d189710000e8322d00/content.htm
CATT - Computer Aided Testing Too
http://help.sap.com/saphelp_47x200/helpdata/en/b3/410b37233f7c6fe10000009b38f936/frameset.htm
Test Workbench
http://help.sap.com/saphelp_47x200/helpdata/en/a8/157235d0fa8742e10000009b38f889/frameset.htm
Coverage Analyser
http://help.sap.com/saphelp_47x200/helpdata/en/c7/af9a79061a11d4b3d4080009b43351/content.htm
Runtime Monitor
http://help.sap.com/saphelp_47x200/helpdata/en/b5/fa121cc15911d5993d00508b6b8b11/content.htm
Memory Inspector
http://help.sap.com/saphelp_47x200/helpdata/en/a2/e5fc84cc87964cb2c29f584152d74e/content.htm
ECATT - Extended Computer Aided testing tool.
http://help.sap.com/saphelp_47x200/helpdata/en/20/e81c3b84e65e7be10000000a11402f/frameset.htm
Just refer to these links...
performance
Performance
Performance Guide
performance issues...
Performance Tuning
Performance issues
performance tuning
performance tuning
You can go to the transaction SE30 to have the runtime analysis of your program.Also try the transaction SCI , which is SAP Code Inspector.
1 Always check the driver internal tables is not empty, while using FOR ALL ENTRIES
2 Avoid for all entries in JOINS
3 Try to avoid joins and use FOR ALL ENTRIES.
4 Try to restrict the joins to 1 level only ie only for 2 tables
5 Avoid using Select *.
6 Avoid having multiple Selects from the same table in the same object.
7 Try to minimize the number of variables to save memory.
8 The sequence of fields in 'where clause' must be as per primary/secondary index ( if any)
9 Avoid creation of index as far as possible
10 Avoid operators like <>, > , < & like % in where clause conditions
11 Avoid select/select single statements in loops.
12 Try to use 'binary search' in READ internal table. Ensure table is sorted before using BINARY SEARCH.
13 Avoid using aggregate functions (SUM, MAX etc) in selects ( GROUP BY , HAVING,)
14 Avoid using ORDER BY in selects
15 Avoid Nested Selects
16 Avoid Nested Loops of Internal Tables
17 Try to use FIELD SYMBOLS.
18 Try to avoid into Corresponding Fields of
19 Avoid using Select Distinct, Use DELETE ADJACENT.
Regards
Anji

Monitoring & Performance Tuning

Hi BW Gurus,
Please let me know common Monitoring & Performance Tuning tasks/issues and how to resolve them.
Thanks in advance
Rajesh

hi Rajesh,
take a look sdn forum performance center
Business Intelligence Performance Tuning [original link is broken]
there are lots of docs
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5ee957e5-0201-0010-9c83-fe14a43cd04a
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cccad390-0201-0010-5093-fd9ec8157802
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ce7fb368-0601-0010-64ba-fadc985a1f94
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3f66ba90-0201-0010-ac8d-b61d8fd9abe9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4c0ab590-0201-0010-bd9a-8332d8b4f09c
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1955ba90-0201-0010-d3aa-8b2a4ef6bbb2
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/c8c4d794-0501-0010-a693-918a17e663cc
and check oss note
557870 'FAQ BW Query Performance' and 567746 'Composite note BW 3.x performance Query and Web'
417307, 409641 etc (search with 'bw performance')
hope this helps.

Performance Tuning Of VA01

Hi,
Please can anybody help me in the performance tuning of the VA01 transaction since its consuming a lot of time in production.
This issue is very urgent.
Pls help.

Always check the driver internal tables is not empty, while using FOR ALL ENTRIES
Avoid for all entries in JOINS
Try to avoid joins and use FOR ALL ENTRIES.
Try to restrict the joins to 1 level only ie only for tables
Avoid using Select *.
Avoid having multiple Selects from the same table in the same object.
Try to minimize the number of variables to save memory.
The sequence of fields in 'where clause' must be as per primary/secondary index ( if any)
Avoid creation of index as far as possible
Avoid operators like <>, > , < & like % in where clause conditions
Avoid select/select single statements in loops.
Try to use 'binary search' in READ internal table. Ensure table is sorted before using BINARY SEARCH.
Avoid using aggregate functions (SUM, MAX etc) in selects ( GROUP BY , HAVING,)
Avoid using ORDER BY in selects
Avoid Nested Selects
Avoid Nested Loops of Internal Tables
Try to use FIELD SYMBOLS.
Try to avoid into Corresponding Fields of
Avoid using Select Distinct, Use DELETE ADJACENT
you can refer these links :
http://www.sapgenie.com/abap/performance.htm
chk this
How to increase the performance of a program
Check the following Links
Re: performance tuning
Re: Performance tuning of program
http://www.sapgenie.com/abap/performance.htm
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
check the below link
http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
See the following link if it's any help:
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
Check also http://service.sap.com/performance
and
books like
http://www.sap-press.com/product.cfm?account=&product=H951
http://www.sap-press.com/product.cfm?account=&product=H973
http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
cheers!
sri

Analysis and Performance tuning of a query

Hi gurus,
We have few reports built on multiprovider (which is containing five basic cubes) whose response time is very slow, so i want to do some analysis to find out why they are runing very slow and also do the performance tuning.
So where do i start and how do i start like is it from Report or multiprovider
if its report or multiprovider please kindly guide me what are the things do i need to look for and how to correct them whether adding something or changing the data design.
i have four reports
1. is runing on three basic cubes
2. is runing on all the five cubes
3.& 4. runing on 2 cubes
so kindly give your inputs
thanks and regards
Neel

docs on performance available in
FAQ - The Future of SAP NetWeaver Business Intelligence in the Light of the NetWeaver BI&Business Objects Roadmap
https://service.sap.com/bi
-> performance
effective query on MP can be found
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b03b7f4c-c270-2910-a8b8-91e0f6d77096
for nw2004s
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a9ab011a-0e01-0010-02a1-d496b94c9c0f
modeling on multiprovider
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2f5aa43f-0c01-0010-a990-9641d3d4eef7
hope this helps.

Performance Tuning for Concurrent Reports

Hi,
Can you help me with Performance Tuning for Concurrent Reports/Requests ?
It was running fine but suddenly running slow.
Request Name : Participation Process: Compensation program

What is your application release?
Please see if (Performance Issues With Participation Process: Compensation Workbench [ID 389979.1]) is applicable.
To enable trace/debug, please see (FAQ: Common Tracing Techniques within the Oracle Applications 11i/R12 [ID 296559.1] -- 5. How does one enable trace for a concurrent program INCLUDING bind variables and waits?).
Thanks,
Hussein

Fyi only: SDN BI Performance Tuning Area

Dear All,
This is just an fyi for those who wish to view BI performance related topics on SDN.
Kindly check SDN URL for BI Area - Performance Tuning
I will not be able to reward points for this thread.
Thanks...

Dear All,
The URL has been fixed..
Fyi only..
Thanks..
FAQ - The Future of SAP NetWeaver Business Intelligence in the Light of the NetWeaver BI&Business Objects Roadmap

Report running for long time & performance tuning

Hi All,
(1). WebI report is running for long time.so what are the steps i need to check for it ?
(2). Can you tell me about performance tuning in BO ?
please help me.....
Thanks
Kumar

(1). WebI report is running for long time.so what are the steps i need to check for it ?
The first step is to see if the problem lies in the query on the data source or in webi itself. Depending on the data source there are different ways to extract the query and try to run it against the database. Which source does your report uses?
(2). Can you tell me about performance tuning in BO ?
I would recommend to start by reading the administrator's guide. There is a section about how to improve performance.
Regards,
Stratos

Oracle 11g Performance tuning approach ?

Hello Experts,
Is it the right forum to follow oracle performance tuning discussions ? If not, let me know what will be the forum to pick up some thread on this subject.
I am looking for performance tuning approach for oracle 11g. I learned there are some new items in 11g in this regard. For persons, who did tuning in earlier versions of Oracle,
what will be the best way adopt to 11 g?
I reviewed the 11g performance tuning guide, but I am looking for some white papers/blogs with case studies and practical approaches. I hope that you have used them.
What are the other sources to pick up some discussions?
Do you mind, share your thoughts?
Thanks in advance.
RI

The best sources of information on performance tuning are:
1. Jonathan Lewis: http://jonathanlewis.wordpress.com/all-postings/
2. Christian Antognini: http://www.antognini.ch/
3. Tanel Poder: http://blog.tanelpoder.com/
4. Richard Foote: http://richardfoote.wordpress.com/
5. Cary Millsap: http://carymillsap.blogspot.com/
and a few dozen others whose blogs you will find cross-referenced in those above.

Performance tuning of BPEL processes in SOA Suite 11g

Hi,
We are working with a customer for performance tuning of SOA Suite 11g, one of the areas is to tune the BPEL processes. I am new to this and started out with stress testing Hello World process using SOAPUI tool. I would like help with the below topics -
1. How do I interpret the statistics collected during stress testing? Do we have any benchmark set that can indicate that the performance is ok.
2. Do we need to run stress tests for every BPEL process deployed?
2. Is there any performance tuning strategy documentation available? Or can anybody share his/her experiences to guide me?
Thanks in advance!
Sritama

1. How do I interpret the statistics collected during stress testing? Do we have any benchmark set that can indicate that the performance is ok.
You need
pay attention to:
java heap usage vs java heap capacity
java eden usage vs java eden capacity
JDBC pool initial connections vs JDBC pool capacity connections
if you are using linux: top
if you are using aix: topas
2. Do we need to run stress tests for every BPEL process deployed?
yes, you need test each BPEL. You can use "Jmeter" tool.
Download Jmeter from here: Apache JMeter - Apache JMeter&trade;
Other tools:
jstat
jstack
jps -v
Enterprise Manager
WebLogic Console
VisualVM
JRockit Mission Control
3. Is there any performance tuning strategy documentation available? Or can anybody share his/her experiences to guide me?
I recommend "Oracle SOA Suite 11g Performance Tuning Cookbook" http://www.amazon.com/Oracle-Suite-Performance-Tuning-Cookbook/dp/1849688842/ref=sr_1_1?ie=UTF8&qid=1378482031&sr=8-1&keywords=oracle+soa+suite+11g+performance+tuning+cookbook

Performance tuning related issues

hi experts
i am new to performance tuning application. can any one share some stuff(bw3.5& bi7)related to the concern area.send any relavent docs to my id: [email protected] .
thanks in advance
regards
gavaskar
[email protected]

hi Gavaskar,
check this, you can download lot of performance materials
Business Intelligence Performance Tuning [original link is broken]
and e-learning -> intermediate course and advance course
https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/fe5b0b5e-0501-0010-cd88-c871915ec3bf [original link is broken]
e.g
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/10b589ad-0701-0010-0299-e5c282b7aaad
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/d9fd84ad-0701-0010-d9a5-ba726caa585d
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/8e6183ad-0701-0010-e083-9ab1c6afe6f2
performance tools in bw 3.5
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/07a4f070-0701-0010-3b91-a6bf7644c98f
(here also you can download the presentation by righ click the disk drive icon)
hope this helps.

[ADF-11.1.2] Proof of view performance tuning in oracle adf

Hello,
Take an example of : http://www.gebs.ro/blog/oracle/adf-view-object-performance-tuning-analysis/
It tells me perfectly how to tune VO to achieve performance, but how to see it working ?
For example: I Set Fetch size of 25, 'in Batch of' set to 1 or 26 I see following SQL Statement in Log
[1028] SELECT Company.COMPANY_ID, Company.CREATED_DATE, Company.CREATED_BY, Company.LAST_MODIFY_DATE, Company.LAST_MODIFY_BY, Company.NAME FROM COMPANY Companyas if it is fetching all the records from table at a time no matter what's the size of Batch. If I am seeing 50 records on UI at a time, then I would expect at least 2 SELECT statement fetching 26 records by each statement if I set Batch Size to 26... OR at least 50 SELECT statement for Batch size set to '1'.
Please tell me how to see view performance tuning working ? How one can say that setting batch size = '1' is bad for performance?

Anandsagar,
why don't you just read up on http://download.oracle.com/docs/cd/E21764_01/core.1111/e10108/adf.htm#CIHHGADG
there are more factors influencing performance than just query. Btw, indexing your queries also helps to tune performance
Frank

Performance tuning in PL/SQL code

Hi,
I am working on already existing PL/SQL code which is written by someone else on validation and conversion of data from a temporary table to base table. It usually has 3.5 million rows. and the procedure takes arount 2.5 - 3 hrs to complete.
Can I enhance the PL/SQL code for better performance ? or, is this OK to take so long to process these many rows?
Thanks!
Yogini

Can I enhance the PL/SQL code for better performance ? Probably you can enhance it.
or, is this OK to take so long to process these many rows? It should take a few minutes, not several hours.
But please provide some more details like your database version etc.
I suggest to TRACE the session that executes the PL/SQL code, with WAIT events, so you'll see where and on what time is spent, you'll identify your 'problem statements very quickly' (after you or your DBA have TKPROF'ed the trace file).
SQL> alter session set events '10046 trace name context forever, level 12';
SQL> execute your PL/SQL code here
SQL> exitWill give you a .trc file in your udump directory on the server.
http://www.oracle-base.com/articles/10g/SQLTrace10046TrcsessAndTkprof10g.php
Also this informative thread can give you more ideas:
HOW TO: Post a SQL statement tuning request - template posting
as well as doing a search on 10046 at AskTom, http://asktom.oracle.com will give you more examples.
and reading Oracle's Performance Tuning Guide: http://www.oracle.com/pls/db102/to_toc?pathname=server.102%2Fb14211%2Ftoc.htm&remark=portal+%28Getting+Started%29

Performance tuning in t

hi,
I have to do perofrmance for one program, it is taking 67000 secs in back ground for execution and 1000 secs for some varints .It is an ALV report.
please suggest me how to proced to change the code.

Performance tuning for Data Selection Statement
<b>http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm</b>Debugger
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
Run Time Analyser
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617cafe68c11d2b2ab080009b43351/content.htm
SQL trace
http://help.sap.com/saphelp_47x200/helpdata/en/d1/801f7c454211d189710000e8322d00/content.htm
CATT - Computer Aided Testing Too
http://help.sap.com/saphelp_47x200/helpdata/en/b3/410b37233f7c6fe10000009b38f936/frameset.htm
Test Workbench
http://help.sap.com/saphelp_47x200/helpdata/en/a8/157235d0fa8742e10000009b38f889/frameset.htm
Coverage Analyser
http://help.sap.com/saphelp_47x200/helpdata/en/c7/af9a79061a11d4b3d4080009b43351/content.htm
Runtime Monitor
http://help.sap.com/saphelp_47x200/helpdata/en/b5/fa121cc15911d5993d00508b6b8b11/content.htm
Memory Inspector
http://help.sap.com/saphelp_47x200/helpdata/en/a2/e5fc84cc87964cb2c29f584152d74e/content.htm
ECATT - Extended Computer Aided testing tool.
http://help.sap.com/saphelp_47x200/helpdata/en/20/e81c3b84e65e7be10000000a11402f/frameset.htm
Just refer to these links...
performance
Performance
Performance Guide
performance issues...
Performance Tuning
Performance issues
performance tuning
performance tuning
You can go to the transaction SE30 to have the runtime analysis of your program.Also try the transaction SCI , which is SAP Code Inspector.

FAQS on Performance Tuning

Similar Messages

Maybe you are looking for