Fast delete in Oracle database

Hi experts,
Is there any way to fast delete records in the table with the condition? We can do the truncate statement this is the fastest way to remove all records in table, but for my case is need to keep records with do not match with conditions. There are over 40 million records in this table.
My database version is 10g.
Thanks in advance.
Regards,
Hieu

901891 wrote:
About 17 million records should be still in the table after the delete completes.one possible alternative to move the rows that should remain into a new table.
Then do a couple of quick table RENAME so that remaining rows end up in old table name.
Lastly TRUNCATE & DROP table with all 40 million rows.
or just bite the bullet & DELETE the 23 million rows.

Similar Messages

Totally deleting an Oracle Database

Hi
I have an Oracle 9i (9.2.0.1.0) database engine installed at my desktop for tests. Amongst those tests, I created several databases that I now want to fully delete since I do not need them anymore. What is the best way to do it?
Thanks in advance
André

The DBCA (DataBase Creation Assitant) has an option to entirely drop a database. It will (or should) also delete any Windows services associated with it.

Installation error message for Oracle Database software for version 10g

Would someone be able to advise why I keep getting the following error message whilst installing Oracle trial Database software for version 10g Release 2 Standard Edition, Standard Edition One, and Enterprise Edition? Link listed below : -
http://www.oracle.com/technology/software/products/database/oracle10g/index.html
Error message "Cannot create directory"C:\oracle\product\10.2.0\db_7\cfgtoollogs\dbca\projemp"
Below is the 12 steps that I go through, please advise what I'm doing wrong : -
1. (Operations) default is Create a database
2. (Database templetes) default is general purpose
3. (Database Identification) projemp.local for Global database name & projemp for SID
4. (Management options) default is "Configure the database with Enterprise manager, also the options button has been clicked for "Use database control for database management"
5. (Database Credentials) the options button has been clicked for "Use the same password for all accounts" so I've set up a new password, was that correct?
6. (Storage options) the options button is clicked for "File System - use the file system for database storage.
7. (Database file locations) the options button is clicked for "Use database file locations for template" Is this option correct? Other options are Use common location for all database files or use Oracle-managed files?
8. (Recovery configuration) the options button is clicked for "Specify flash recovery area
9. (Database content) nothing has been selected, the only option is "Sample schemas" should that be clicked?
10. (Initialization parameters) the options button is clicked for "Typical- allocate memory as a % of the total physical memory
11. (Database storage) no options available
12. (Creation options) the options button has been selected for "Create Database"
Click finish
I then get a screen stating General purpose, click OK then I get the following error message as stated at the start of this e-mail ""Cannot create directory"C:\oracle\product\10.2.0\db_7\cfgtoollogs\dbca\projemp".
Regards
Phil

855880 wrote:
I have been trying to install the "Oracle Database software for version 10g Release 2 Standard Edition, Standard Edition One, and Enterprise Edition" about six times with no success.Do you realize you just mentioned 3 different and distinct products? So which one are you installing?
>
I've gone through my courses instructions as listed above (1-12) and end up with the following error message"C:\oracle\product\10.2.0\db_7\cfgtoollogs\dbca\projemp".What course?
>
I've removed the software from my computer using control panel, programs & features then uninstall once but the other five times the software hasn't been listed. Whilst the Oracle was on my task bar I was able to install using Start > Programs > Oracle - HOME-NAME > Database Administration > Database Configuration Assistant.No you didn't. Database Configuration Assistant does not remove software. It can remove a database. As I mentioned before, there is a difference between the software and the objects that software manages. Deleting an Excel spreadsheet is not the same as deleting Microsoft Office. Deleting an Oracle database with Database configuration assistant is not the same as removing the Oracle software.
>
Now that oracle is not on my task bar I've unzipped the link below, clicked on db, Disk1, setup, changed the Database password (is that correct?) install and I get the following error message "Check complete. The overall result of this check is: Failed<<<<<
Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses;
However, before you can do this, you must configure the Microsoft LoopBack Adaptor to be the primary network adapter on the system. See the installation Guide for more details on installing the software on systems configured with DHCP."
So what did you do with the above error message? Did you follow up on what it said? Did you read the very fine Installation Guide that comes with the software? Did you read the section on networking considerations where it discussed DHCP assigned addresses and installing the loopback adapter?
http://www.oracle.com/technology/software/products/database/oracle10g/index.html
Ok, that link takes us to the download page, which does not shed any light at all on your problems
I'm using Windows Vista Home Premium, 32 bit operating system, and my computer is saying I have 142 GB free space.
If you read the installation manual that came with the downloaded software, you'd have seen in the prerequisites that Home editions of Windows are NOT listed as supported platforms, whereas Business, Enterprise, and Ultimate editions specifically ARE listed as supportd.
Hope this is some help.And
I'm not to clever on computers so would you be able to advise how I get to the command window to issue the SET command please?
Also I've no idea what OS user I am, I'm taking an on-line Oracle course and been advised to install "Oracle Database software for version 10g Release 2 Standard Edition, Standard Edition One, and Enterprise Edition"
How do I find out if I'm part of an Administrator, ORA_DBA group ?
Can you walk me through how to create the directory from command line please?Ok, given the above statements from you, I'm not even sure where to begin. I don't want to be cruel, but this self-admitted lack of even the most rudimentary knowledge by someone attempting to learn about Oracle is truly astounding. What course are you taking? Why are you taking this course?

How to delete data before insert in oracle database

Hi friends,
I have one scenario.I want to send data from sap to Oracle database.Befor i am inserting data in database table,i want to clean/delete all the records in the table .This interface will run twice in a day.Can any body help me.
SAP-PI-JDBC
Thanks
Ravi

Hi Puneet,
As per u r suggestions,i am using stored procedure.But i am getting following error.
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. MASTERXXXXXX' (structure 'Statement'): java.sql.SQLException: ERROR: Invalid XML document format for stored procedure: 'type="<SQL-type>"' attribute is missing for element 'NAME' (Setting a SQL-type (e.g. INTEGER, CHAR, DATE etc.) is mandatory !)'
I have define below structure.Please check the structure and guide me.
<Statement
        Action   attribute required
        Table
Access
        Empname   string
        Empid         string
        date            date
          Type     attribute   required
EXECUTE----
>Action
Table----
>MASTERXXXXXX
Type----
>char
Please check the above structure andguide me to changes if any requires.
Thanks
Ravi

How to setup oracle database to archivelog mode and auto delete ?

Oracle 11g R2
- How to setup database to archive log mode and have oracle only save 24 hours of archive logs
and delete the rest. So at any given time I will have only 24 hours of archive log and not more.
So only 1 day of archive logs.
- Let me know the database parameters I need to setup to accomplish this.
- I don't want to use the RMAN
- I am not setting up the database to archive log mode for recovery purpose. I am setting up archive log mode
so we can use the log miner tool to dig up achives to see log activity for any performance & tuning.
Edited by: johnpau2013 on May 9, 2012 6:09 PM

johnpau2013 wrote:
Thanks everyone for there responses.
I need to rephrase and explain everyone as what I wanted to do exactly. This might help everyone understand and suggest me.
We have oracle database 11g r2. Its a test database. Nothing is critical. We use EXPDP utility to backup the entire database every night. Which is enough for us to recover incase something happens. Even if we loose some data. That's fine.
We are testing our web application on this oracle test database for performance & tuning.
One thing we have noticed is that the redo logs are switching very frequently. 50MB each log file and there are 5 logs. each log switches every 40 seconds. So we wanted to see what is getting written in this redo logs. We wanted to use the LOG MINER tool in OEM to read the logs. It needed our database to be setup in archive log mode. So the log miner can read the archive logs and show us the sql's within the archive logs.
Now when we setup the archive log mode on our database. By default the archive logs destination was set to flash recovery area ( may be oracle default archive log location is flash recovery area folder).
We have setup the db_recovery_file_dest_size to 100GB. Now within 2 days we have filled up the flash recovery area folder. Database was frozen. Then we realized that its because oracle couldn't write archive logs. Because it reached the 100GB. Then we physically deleted files in the flash recovery area folder. Thinking it would help us start the frozen oracle database. But it didn't . The we realized that we are doing something wrong. As Oracle does not know that at OS level we deleted the files. Then temporarily we changed the db_recovery_file_dest_size to 130GB and were able to start the oracle database. Later we turned OFF the archive log mode.
Being a rookie DBA we would have not read something properly.
Finally:
We wanted to know how to always keep only 1 day of archive logs (only for our performance tuning ) and not more than that. All we need this 1 day of archive logs is to use the log miner to read them. Backup is NOT our priority here. Only be able to read the archive logs from LOG MINER is PRIORITY.
Correct me if I am wrong.Okay, so its making much more sense now, thanks for explaining your requirement.
Database won't honor anything that you would do over the o/s without telling it. Your deletion of the archive log from the o/s location is NOT updated in the control file of the database and that's why, even when you had deleted the entire 100GB , from the db perspective, the space was still marked as used. This is the same which would happen even if you would increase the space from 100gb to whatever size as well. To delete the space, you would need to update the database's control file and that you can do from RMAN using its two commands , crosscheck backup following with deleted expired backup . The first command would find that which database backup files are NOT on the o/s which are shown in the control file and would mark all of them as expired. The second command would simply delete those expired files. This would update the control file and you would have your 100gb or whatever space, given back to you.
To keep the archive logs of just one day, set up that Retention Policy for RMAN to either number of copies using the Redundancy option(default and set to 1) or Recovery Window. I believe for you Redundancy would be a suitable choice but you can have a read and play around with it. Setting it up would mark the files as Obsoleted and finally, you can write a small RMAN script to delete those obsoleted files.
Now, what I don't understand is that why you want to keep on generating the archive logs just for the log miner? If you would have generated them once and figure out the reason for extensive redo generation(did you try increasing the redo log file size, 50mb seems to be smallish) , I don't think that there is any reason to keep on generating the archive logs still .
And last part, for your question asked about that whether we can use RMAN to put the db in the archive log and is it a backup tool, yes and yes.
HTH
Aman....

Delete Oracle database software

Hi people,
I´ve uninstalled a central instance, now I want to uninstall the database software, but in the installation guide in chapter 6 (Additional information) It says the next:
The Oracle software is installed on all hosts where an SAP instance is running, for example, on a central instance host, database host, or dialog inst ance host. Do not delete t he Oracle database software, if another SAP inst ance is running on the same host.
But the uninstalled instance was in the oracle home --> oracleCH1102 and the other instance that is up and running is in another oracle home --> oraclePES102. I have to follow the guide or can uninstall the oracle database software because in your oracle home there aren´t any instance up and running?
More thanks

hi,
make a backup for your oracle central directory before any detachment.
if your oracle version is 11g, you can no longer launch OUI to detach oracle home. please have a look on Note 1525025 - Oracle 11.2.0: Oracle Software Deinstallation.
Cheers,
Thanks,
Nicholas Chang

Delete old records in oracle database using jobs

Hi,
will it be possible to delete old records in oracle database using jobs
need to delete old records on weekly basis and rebuild my index.
Thanks!

933633, While it is possible to do a great deal with the dbms_scheduler your shop should have a scheduler like CA Unicenter that is used to run the application job schedules. Purge jobs should probably be part of the normal application schedule rather than contained in the database, if your shop has a scheduler in use.
As far as rebuilding the indexes after the purge keep in mind that freshly rebuilt indexes often have to split when inserts are performed due to the fact the compacted index blocks do not have room to hold the newly inserted keys in the appropriate locations. So just because you purge weekly does not automatically mean the indexes should be rebuilt weekly. You need to look at the index key DML pattern and at the total percentage of the index that is held by deleted rows.
HTH -- Mark D Powell --

Can't Delete Oracle Database Job

i created an oracle database job and some of them is only a sample test job. i need to delete them but the delete option is not enabled. it looks like all the other oracle database job that i created can't be deleted. please advise thanks.

it does not have. i guess a dependencies should not cause the problem because other jobs that does have dependencies can be deleted. it is only the oracle database job that can't be deleted. thanks.

Db-cascade-delete for other databases than Oracle?

I have two entity beans with a one to many relationship. The database designers have implemented a cascading delete between the two tables for the entity beans. How should the deployment descriptors be written for this to work properly? From what I understand I will need to use the <cascade-delete /> tag in ejb-jar.xml and <db-cascade-delete /> in weblogic-cmp-jar.xml. However this document http://e-docs.bea.com/wls/docs81/ejb/entity.html states that <db-cascade-delete /> only works for Oracle, and I'm using DB2. Does this mean that I have to remove the cascading delete in the database and only enable it in ejb-jar.xml, or will <db-cascade-delete /> work for other databases than Oracle?
/Björn

To get the certified answer I'd ask a tech support rep. Unofficially, if DB2 supports cascade delete then I would expect that the EJB container will work with that. There are issues surrounding certification of features against specific databases and I'm not up on all of these so I'd check with support.

Delete oracle database

how to delete oracle database from OEM?
regards
wire

You can't delete the database from OEM.
You can do it either manually or using DBCA (database configuration assistant) utility supplied by oracle.
I believe 10g has drop database command.
Jaffar

Windows system files deleted on oracle host

hi experts,
i have an issue regarding oracle database on windows XP... one of my client is using oracle 9.0.1.0
he used it for 5 years having no problem at all, but couple of days before, he installed internet connection on the oracle host, and soon after he start using internet, some OS files get corrupted with virus. he scan the machine with anti virus software, but his luck was really very bad, while scanning power goes off and server faces abnormal shutdown.
after restarting server, he found that oracle is not getting open and some programs also fails to run. no error stack was generated though. i think some files which are corrupted with virus might got deleted with anti virus scan.
these files don't belongs to oracle but to operating system (system 32) folder.now, when we are trying to access oracle we have to navigate to $ORACLE_HOME/ora90/BIN directory even to obtain LSNRCTL prompt and to perform any activity.
when we try to connect to database as sysdba it says "ORA- 12203: TNS unable to connect destination".
i tried listener.ora,tnsmnames.ora file but they are ok. all the oracle directory structure is intact and ORACLE_HOME is set to c:\oracle\ora90\
i even tried to recreate instance and tried starting database, but no luck...services in control panel are started.
what else i should be looking for????? can anyone suggest some solutions???
it will be really appreciable..
thanks and regards
VD

Hello,
+1. first time "ORA-12203 unable to connect destination:"+
Make sure you have correct entries for Host in listener.ora and tnsnames.ora. What is your machine name? Post your tnsnames.ora and listener.ora entries.
What does your alert.log says?
+2. second time invalid username/password+
+3. another time after entering username it dosent ask for password and hangs.....for long+
Did you try following command
C:>sqlplus "/as sysdba' --> OS authenticaiton.
{code}
listener is up and oracle service<sid> is also up...
+it is not allowing me to start DBCA either.....do i need to reinstall oracle software, create instance, with existing pfile?? can we specisy pfile=<path> in oradim command???+
h4. If you have choice of re-install and recreate instance, then I think you should go with it as this way it will be faster to get going.
h4. But if you just want to install software then shutdown instance and listener and re-install same version and try it to bring it up.
Regards

Query in timesten taking more time than query in oracle database

Hi,
Can anyone please explain me why query in timesten taking more time
than query in oracle database.
I am mentioning in detail what are my settings and what have I done
step by step.........
1.This is the table I created in Oracle datababase
(Oracle Database 10g Enterprise Edition Release 10.2.0.1.0)...
CREATE TABLE student (
id NUMBER(9) primary keY ,
first_name VARCHAR2(10),
last_name VARCHAR2(10)
2.THIS IS THE ANONYMOUS BLOCK I USE TO
POPULATE THE STUDENT TABLE(TOTAL 2599999 ROWS)...
declare
firstname varchar2(12);
lastname varchar2(12);
catt number(9);
begin
for cntr in 1..2599999 loop
firstname:=(cntr+8)||'f';
lastname:=(cntr+2)||'l';
if cntr like '%9999' then
dbms_output.put_line(cntr);
end if;
insert into student values(cntr,firstname, lastname);
end loop;
end;
3. MY DSN IS SET THE FOLLWING WAY..
DATA STORE PATH- G:\dipesh3repo\db
LOG DIRECTORY- G:\dipesh3repo\log
PERM DATA SIZE-1000
TEMP DATA SIZE-1000
MY TIMESTEN VERSION-
C:\Documents and Settings\dipesh>ttversion
TimesTen Release 7.0.3.0.0 (32 bit NT) (tt70_32:17000) 2007-09-19T16:04:16Z
Instance admin: dipesh
Instance home directory: G:\TimestTen\TT70_32
Daemon home directory: G:\TimestTen\TT70_32\srv\info
THEN I CONNECT TO THE TIMESTEN DATABASE
C:\Documents and Settings\dipesh> ttisql
command>connect "dsn=dipesh3;oraclepwd=tiger";
4. THEN I START THE AGENT
call ttCacheUidPwdSet('SCOTT','TIGER');
Command> CALL ttCacheStart();
5.THEN I CREATE THE READ ONLY CACHE GROUP AND LOAD IT
create readonly cache group rc_student autorefresh
interval 5 seconds from student
(id int not null primary key, first_name varchar2(10), last_name varchar2(10));
load cache group rc_student commit every 100 rows;
6.NOW I CAN ACCESS THE TABLES FROM TIMESTEN AND PERFORM THE QUERY
I SET THE TIMING..
command>TIMING 1;
consider this query now..
Command> select * from student where first_name='2155666f';
< 2155658, 2155666f, 2155660l >
1 row found.
Execution time (SQLExecute + Fetch Loop) = 0.668822 seconds.
another query-
Command> SELECT * FROM STUDENTS WHERE FIRST_NAME='2340009f';
2206: Table SCOTT.STUDENTS not found
Execution time (SQLPrepare) = 0.074964 seconds.
The command failed.
Command> SELECT * FROM STUDENT where first_name='2093434f';
< 2093426, 2093434f, 2093428l >
1 row found.
Execution time (SQLExecute + Fetch Loop) = 0.585897 seconds.
Command>
7.NOW I PERFORM THE SIMILAR QUERIES FROM SQLPLUS...
SQL> SELECT * FROM STUDENT WHERE FIRST_NAME='1498671f';
ID FIRST_NAME LAST_NAME
1498663 1498671f 1498665l
Elapsed: 00:00:00.15
Can anyone please explain me why query in timesten taking more time
that query in oracle database.
Message was edited by: Dipesh Majumdar
user542575
Message was edited by:
user542575

TimesTen
Hardware: Windows Server 2003 R2 Enterprise x64; 8 x Dual-core AMD 8216 2.41GHz processors; 32 GB RAM
Version: 7.0.4.0.0 64 bit
Schema:
create usermanaged cache group factCache from
MV_US_DATAMART
ORDER_DATE               DATE,
IF_SYSTEM               VARCHAR2(32) NOT NULL,
GROUPING_ID                TT_BIGINT,
TIME_DIM_ID               TT_INTEGER NOT NULL,
BUSINESS_DIM_ID          TT_INTEGER NOT NULL,
ACCOUNT_DIM_ID               TT_INTEGER NOT NULL,
ORDERTYPE_DIM_ID          TT_INTEGER NOT NULL,
INSTR_DIM_ID               TT_INTEGER NOT NULL,
EXECUTION_DIM_ID          TT_INTEGER NOT NULL,
EXEC_EXCHANGE_DIM_ID TT_INTEGER NOT NULL,
NO_ORDERS               TT_BIGINT,
FILLED_QUANTITY          TT_BIGINT,
CNT_FILLED_QUANTITY          TT_BIGINT,
QUANTITY               TT_BIGINT,
CNT_QUANTITY               TT_BIGINT,
COMMISSION               BINARY_FLOAT,
CNT_COMMISSION               TT_BIGINT,
FILLS_NUMBER               TT_BIGINT,
CNT_FILLS_NUMBER          TT_BIGINT,
AGGRESSIVE_FILLS          TT_BIGINT,
CNT_AGGRESSIVE_FILLS          TT_BIGINT,
NOTIONAL               BINARY_FLOAT,
CNT_NOTIONAL               TT_BIGINT,
TOTAL_PRICE               BINARY_FLOAT,
CNT_TOTAL_PRICE          TT_BIGINT,
CANCELLED_ORDERS_COUNT          TT_BIGINT,
CNT_CANCELLED_ORDERS_COUNT     TT_BIGINT,
ROUTED_ORDERS_NO          TT_BIGINT,
CNT_ROUTED_ORDERS_NO          TT_BIGINT,
ROUTED_LIQUIDITY_QTY          TT_BIGINT,
CNT_ROUTED_LIQUIDITY_QTY     TT_BIGINT,
REMOVED_LIQUIDITY_QTY          TT_BIGINT,
CNT_REMOVED_LIQUIDITY_QTY     TT_BIGINT,
ADDED_LIQUIDITY_QTY          TT_BIGINT,
CNT_ADDED_LIQUIDITY_QTY     TT_BIGINT,
AGENT_CHARGES               BINARY_FLOAT,
CNT_AGENT_CHARGES          TT_BIGINT,
CLEARING_CHARGES          BINARY_FLOAT,
CNT_CLEARING_CHARGES          TT_BIGINT,
EXECUTION_CHARGES          BINARY_FLOAT,
CNT_EXECUTION_CHARGES          TT_BIGINT,
TRANSACTION_CHARGES          BINARY_FLOAT,
CNT_TRANSACTION_CHARGES     TT_BIGINT,
ORDER_MANAGEMENT          BINARY_FLOAT,
CNT_ORDER_MANAGEMENT          TT_BIGINT,
SETTLEMENT_CHARGES          BINARY_FLOAT,
CNT_SETTLEMENT_CHARGES          TT_BIGINT,
RECOVERED_AGENT          BINARY_FLOAT,
CNT_RECOVERED_AGENT          TT_BIGINT,
RECOVERED_CLEARING          BINARY_FLOAT,
CNT_RECOVERED_CLEARING          TT_BIGINT,
RECOVERED_EXECUTION          BINARY_FLOAT,
CNT_RECOVERED_EXECUTION     TT_BIGINT,
RECOVERED_TRANSACTION          BINARY_FLOAT,
CNT_RECOVERED_TRANSACTION     TT_BIGINT,
RECOVERED_ORD_MGT          BINARY_FLOAT,
CNT_RECOVERED_ORD_MGT          TT_BIGINT,
RECOVERED_SETTLEMENT          BINARY_FLOAT,
CNT_RECOVERED_SETTLEMENT     TT_BIGINT,
CLIENT_AGENT               BINARY_FLOAT,
CNT_CLIENT_AGENT          TT_BIGINT,
CLIENT_ORDER_MGT          BINARY_FLOAT,
CNT_CLIENT_ORDER_MGT          TT_BIGINT,
CLIENT_EXEC               BINARY_FLOAT,
CNT_CLIENT_EXEC          TT_BIGINT,
CLIENT_TRANS               BINARY_FLOAT,
CNT_CLIENT_TRANS          TT_BIGINT,
CLIENT_CLEARING          BINARY_FLOAT,
CNT_CLIENT_CLEARING          TT_BIGINT,
CLIENT_SETTLE               BINARY_FLOAT,
CNT_CLIENT_SETTLE          TT_BIGINT,
CHARGEABLE_TAXES          BINARY_FLOAT,
CNT_CHARGEABLE_TAXES          TT_BIGINT,
VENDOR_CHARGE               BINARY_FLOAT,
CNT_VENDOR_CHARGE          TT_BIGINT,
ROUTING_CHARGES          BINARY_FLOAT,
CNT_ROUTING_CHARGES          TT_BIGINT,
RECOVERED_ROUTING          BINARY_FLOAT,
CNT_RECOVERED_ROUTING          TT_BIGINT,
CLIENT_ROUTING               BINARY_FLOAT,
CNT_CLIENT_ROUTING          TT_BIGINT,
TICKET_CHARGES               BINARY_FLOAT,
CNT_TICKET_CHARGES          TT_BIGINT,
RECOVERED_TICKET_CHARGES     BINARY_FLOAT,
CNT_RECOVERED_TICKET_CHARGES     TT_BIGINT,
PRIMARY KEY(ORDER_DATE, TIME_DIM_ID, BUSINESS_DIM_ID, ACCOUNT_DIM_ID, ORDERTYPE_DIM_ID, INSTR_DIM_ID, EXECUTION_DIM_ID,EXEC_EXCHANGE_DIM_ID),
READONLY);
No of rows: 2228558
Config:
< CkptFrequency, 600 >
< CkptLogVolume, 0 >
< CkptRate, 0 >
< ConnectionCharacterSet, US7ASCII >
< ConnectionName, tt_us_dma >
< Connections, 64 >
< DataBaseCharacterSet, AL32UTF8 >
< DataStore, e:\andrew\datacache\usDMA >
< DurableCommits, 0 >
< GroupRestrict, <NULL> >
< LockLevel, 0 >
< LockWait, 10 >
< LogBuffSize, 65536 >
< LogDir, e:\andrew\datacache\ >
< LogFileSize, 64 >
< LogFlushMethod, 1 >
< LogPurge, 0 >
< Logging, 1 >
< MemoryLock, 0 >
< NLS_LENGTH_SEMANTICS, BYTE >
< NLS_NCHAR_CONV_EXCP, 0 >
< NLS_SORT, BINARY >
< OracleID, NYCATP1 >
< PassThrough, 0 >
< PermSize, 4000 >
< PermWarnThreshold, 90 >
< PrivateCommands, 0 >
< Preallocate, 0 >
< QueryThreshold, 0 >
< RACCallback, 0 >
< SQLQueryTimeout, 0 >
< TempSize, 514 >
< TempWarnThreshold, 90 >
< Temporary, 1 >
< TransparentLoad, 0 >
< TypeMode, 0 >
< UID, OS_OWNER >
ORACLE:
Hardware: Sunos 5.10; 24x1.8Ghz (unsure of type); 82 GB RAM
Version 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
Schema:
CREATE MATERIALIZED VIEW OS_OWNER.MV_US_DATAMART
TABLESPACE TS_OS
PARTITION BY RANGE (ORDER_DATE)
PARTITION MV_US_DATAMART_MINVAL VALUES LESS THAN (TO_DATE(' 2007-11-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_07_NOV_D1 VALUES LESS THAN (TO_DATE(' 2007-11-11 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_07_NOV_D2 VALUES LESS THAN (TO_DATE(' 2007-11-21 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_07_NOV_D3 VALUES LESS THAN (TO_DATE(' 2007-12-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_07_DEC_D1 VALUES LESS THAN (TO_DATE(' 2007-12-11 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_07_DEC_D2 VALUES LESS THAN (TO_DATE(' 2007-12-21 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_07_DEC_D3 VALUES LESS THAN (TO_DATE(' 2008-01-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_08_JAN_D1 VALUES LESS THAN (TO_DATE(' 2008-01-11 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_08_JAN_D2 VALUES LESS THAN (TO_DATE(' 2008-01-21 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_08_JAN_D3 VALUES LESS THAN (TO_DATE(' 2008-02-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_MAXVAL VALUES LESS THAN (MAXVALUE)
LOGGING
NOCOMPRESS
TABLESPACE TS_OS
NOCACHE
NOCOMPRESS
NOPARALLEL
BUILD DEFERRED
USING INDEX
TABLESPACE TS_OS_INDEX
REFRESH FAST ON DEMAND
WITH PRIMARY KEY
ENABLE QUERY REWRITE
AS
SELECT order_date, if_system,
GROUPING_ID (order_date,
if_system,
business_dim_id,
time_dim_id,
account_dim_id,
ordertype_dim_id,
instr_dim_id,
execution_dim_id,
exec_exchange_dim_id
) GROUPING_ID,
/* ============ DIMENSIONS ============ */
time_dim_id, business_dim_id, account_dim_id, ordertype_dim_id,
instr_dim_id, execution_dim_id, exec_exchange_dim_id,
/* ============ MEASURES ============ */
-- o.FX_RATE /* FX_RATE */,
COUNT (*) no_orders,
-- SUM(NO_ORDERS) NO_ORDERS,
-- COUNT(NO_ORDERS) CNT_NO_ORDERS,
SUM (filled_quantity) filled_quantity,
COUNT (filled_quantity) cnt_filled_quantity, SUM (quantity) quantity,
COUNT (quantity) cnt_quantity, SUM (commission) commission,
COUNT (commission) cnt_commission, SUM (fills_number) fills_number,
COUNT (fills_number) cnt_fills_number,
SUM (aggressive_fills) aggressive_fills,
COUNT (aggressive_fills) cnt_aggressive_fills,
SUM (fx_rate * filled_quantity * average_price) notional,
COUNT (fx_rate * filled_quantity * average_price) cnt_notional,
SUM (fx_rate * fills_number * average_price) total_price,
COUNT (fx_rate * fills_number * average_price) cnt_total_price,
SUM (CASE
WHEN order_status = 'C'
THEN 1
ELSE 0
END) cancelled_orders_count,
COUNT (CASE
WHEN order_status = 'C'
THEN 1
ELSE 0
END
) cnt_cancelled_orders_count,
-- SUM(t.FX_RATE*t.NO_FILLS*t.AVG_PRICE) AVERAGE_PRICE,
-- SUM(FILLS_NUMBER*AVERAGE_PRICE) STAGING_AVERAGE_PRICE,
-- COUNT(FILLS_NUMBER*AVERAGE_PRICE) CNT_STAGING_AVERAGE_PRICE,
SUM (routed_orders_no) routed_orders_no,
COUNT (routed_orders_no) cnt_routed_orders_no,
SUM (routed_liquidity_qty) routed_liquidity_qty,
COUNT (routed_liquidity_qty) cnt_routed_liquidity_qty,
SUM (removed_liquidity_qty) removed_liquidity_qty,
COUNT (removed_liquidity_qty) cnt_removed_liquidity_qty,
SUM (added_liquidity_qty) added_liquidity_qty,
COUNT (added_liquidity_qty) cnt_added_liquidity_qty,
SUM (agent_charges) agent_charges,
COUNT (agent_charges) cnt_agent_charges,
SUM (clearing_charges) clearing_charges,
COUNT (clearing_charges) cnt_clearing_charges,
SUM (execution_charges) execution_charges,
COUNT (execution_charges) cnt_execution_charges,
SUM (transaction_charges) transaction_charges,
COUNT (transaction_charges) cnt_transaction_charges,
SUM (order_management) order_management,
COUNT (order_management) cnt_order_management,
SUM (settlement_charges) settlement_charges,
COUNT (settlement_charges) cnt_settlement_charges,
SUM (recovered_agent) recovered_agent,
COUNT (recovered_agent) cnt_recovered_agent,
SUM (recovered_clearing) recovered_clearing,
COUNT (recovered_clearing) cnt_recovered_clearing,
SUM (recovered_execution) recovered_execution,
COUNT (recovered_execution) cnt_recovered_execution,
SUM (recovered_transaction) recovered_transaction,
COUNT (recovered_transaction) cnt_recovered_transaction,
SUM (recovered_ord_mgt) recovered_ord_mgt,
COUNT (recovered_ord_mgt) cnt_recovered_ord_mgt,
SUM (recovered_settlement) recovered_settlement,
COUNT (recovered_settlement) cnt_recovered_settlement,
SUM (client_agent) client_agent,
COUNT (client_agent) cnt_client_agent,
SUM (client_order_mgt) client_order_mgt,
COUNT (client_order_mgt) cnt_client_order_mgt,
SUM (client_exec) client_exec, COUNT (client_exec) cnt_client_exec,
SUM (client_trans) client_trans,
COUNT (client_trans) cnt_client_trans,
SUM (client_clearing) client_clearing,
COUNT (client_clearing) cnt_client_clearing,
SUM (client_settle) client_settle,
COUNT (client_settle) cnt_client_settle,
SUM (chargeable_taxes) chargeable_taxes,
COUNT (chargeable_taxes) cnt_chargeable_taxes,
SUM (vendor_charge) vendor_charge,
COUNT (vendor_charge) cnt_vendor_charge,
SUM (routing_charges) routing_charges,
COUNT (routing_charges) cnt_routing_charges,
SUM (recovered_routing) recovered_routing,
COUNT (recovered_routing) cnt_recovered_routing,
SUM (client_routing) client_routing,
COUNT (client_routing) cnt_client_routing,
SUM (ticket_charges) ticket_charges,
COUNT (ticket_charges) cnt_ticket_charges,
SUM (recovered_ticket_charges) recovered_ticket_charges,
COUNT (recovered_ticket_charges) cnt_recovered_ticket_charges
FROM us_datamart_raw
GROUP BY order_date,
if_system,
business_dim_id,
time_dim_id,
account_dim_id,
ordertype_dim_id,
instr_dim_id,
execution_dim_id,
exec_exchange_dim_id;
-- Note: Index I_SNAP$_MV_US_DATAMART will be created automatically
-- by Oracle with the associated materialized view.
CREATE UNIQUE INDEX OS_OWNER.MV_US_DATAMART_UDX ON OS_OWNER.MV_US_DATAMART
(ORDER_DATE, TIME_DIM_ID, BUSINESS_DIM_ID, ACCOUNT_DIM_ID, ORDERTYPE_DIM_ID,
INSTR_DIM_ID, EXECUTION_DIM_ID, EXEC_EXCHANGE_DIM_ID)
NOLOGGING
NOPARALLEL
COMPRESS 7;
No of rows: 2228558
The query (taken Mondrian) I run against each of them is:
select sum("MV_US_DATAMART"."NOTIONAL") as "m0"
--, sum("MV_US_DATAMART"."FILLED_QUANTITY") as "m1"
--, sum("MV_US_DATAMART"."AGENT_CHARGES") as "m2"
--, sum("MV_US_DATAMART"."CLEARING_CHARGES") as "m3"
--, sum("MV_US_DATAMART"."EXECUTION_CHARGES") as "m4"
--, sum("MV_US_DATAMART"."TRANSACTION_CHARGES") as "m5"
--, sum("MV_US_DATAMART"."ROUTING_CHARGES") as "m6"
--, sum("MV_US_DATAMART"."ORDER_MANAGEMENT") as "m7"
--, sum("MV_US_DATAMART"."SETTLEMENT_CHARGES") as "m8"
--, sum("MV_US_DATAMART"."COMMISSION") as "m9"
--, sum("MV_US_DATAMART"."RECOVERED_AGENT") as "m10"
--, sum("MV_US_DATAMART"."RECOVERED_CLEARING") as "m11"
--,sum("MV_US_DATAMART"."RECOVERED_EXECUTION") as "m12"
--,sum("MV_US_DATAMART"."RECOVERED_TRANSACTION") as "m13"
--, sum("MV_US_DATAMART"."RECOVERED_ROUTING") as "m14"
--, sum("MV_US_DATAMART"."RECOVERED_ORD_MGT") as "m15"
--, sum("MV_US_DATAMART"."RECOVERED_SETTLEMENT") as "m16"
--, sum("MV_US_DATAMART"."RECOVERED_TICKET_CHARGES") as "m17"
--,sum("MV_US_DATAMART"."TICKET_CHARGES") as "m18"
--, sum("MV_US_DATAMART"."VENDOR_CHARGE") as "m19"
          from "OS_OWNER"."MV_US_DATAMART" "MV_US_DATAMART"
where I uncomment a column at a time and rerun. I improved the TimesTen results since my first post, by retyping the NUMBER columns to BINARY_FLOAT. The results I got were:
No Columns     ORACLE     TimesTen
1     1.05     0.94
2     1.07     1.47
3     2.04     1.8
4     2.06     2.08
5     2.09     2.4
6     3.01     2.67
7     4.02     3.06
8     4.03     3.37
9     4.04     3.62
10     4.06     4.02
11     4.08     4.31
12     4.09     4.61
13     5.01     4.76
14     5.02     5.06
15     5.04     5.25
16     5.05     5.48
17     5.08     5.84
18     6     6.21
19     6.02     6.34
20     6.04     6.75

Oracle database 11g release 2 installation problem on windows 7 (64-bit)

First of all my windows is not genuine, but on my friend's desktop oracle download and installation worked fine, he chose "create and configure database" options, and it works very well on his desktop, though his windows is also illegitimate. In my case, when I select "Create and configure database" option and pressed 'next",
(Go to my blog to see it with snapshots: Computer Science: Oracle database 11g release 2 installation problem on windows 7 (64-bit))
it asks to select class, I select "Desktop class" and pressed "next". The moment I pressed "next", the whole setup thing disappeared like it was never started. I searched for all possible reasons for why its not getting installed on my laptop, I used registry cleaner s/w, deleted 25 GB of data to create free space if it were the problem, increased the virtual memory to increase the space for RAM, I did almost everything to get this setup working, but I found no success with the "Create and Configure database" option
and
then
I chose a "database software only" option and chose to store in a folder w/o spaces. This way, I got database s/w only and then later I found "Database configuration Assistant (DBCA)" from windows START button and clicked to create and configure database manually. The steps are pretty much interactive and doesn't involve much brainstorming.
The values I filled for
1) Global Database Name : orcl
2) System Identifier : orcl
3) I chose common password for both SYS and SYSTEM
4) while on Enterprise Manager Configuration step, It asked me to create and configure listener in oracle home, so for that too, I typed "netca" in windows START menu and clicked it. There I added a listener.
5) I chose a Storage area which was the Oracle-home itself i.e. where our installation files goes , in my case it is : C:\oracle_base\product\11.2.0\dbhome_1\oradata
6) Then after few more nitty-gritty clicks, we are set to go !
Finally to write SQL code and to create your first TABLE , type "sqlplus" in windows "START" menu and click it when it appears. A command-prompt like window appears , which will ask you for username and password, so here they are :
Username : sys/ as sysdba
Password : (its the one you created in step 3 stated above )
After this you are ready to write your first SQL command.

Is this your solution to your original post at Oracle database 11g release 2 installation on windows 7 (64-bit) ?
Pl be aware that you should not create any custom objects in SYS or SYSTEM schema - you should create any such objects in a separate custom schema.
About Database Administrator Security and Privileges

Sample Response File for Oracle Database 12c Standard Edition on Oracle Linux 6.4 -- working

oracle@styles-and-artists-development-oracle database]$ cat response/db_install.rsp
## Copyright(c) Oracle Corporation 1998,2013. All rights reserved.##
## Specify values for the variables listed below to customize     ##
## your installation.                                             ##
## Each variable is associated with a comment. The comment        ##
## can help to populate the variables with the appropriate        ##
## values.                                                        ##
## IMPORTANT NOTE: This file contains plain text passwords and    ##
## should be secured to have read permission only by oracle user ##
## or db administrator who owns this installation.                ##
# Do not change the following system generated value.
oracle.install.responseFileVersion=/oracle/install/rspfmt_dbinstall_response_schema_v12.1.0
# Specify the installation option.
# It can be one of the following:
#   - INSTALL_DB_SWONLY
#   - INSTALL_DB_AND_CONFIG
#   - UPGRADE_DB
oracle.install.option=INSTALL_DB_AND_CONFIG
# Specify the hostname of the system as set during the install. It can be used
# to force the installation to use an alternative hostname rather than using the
# first hostname found on the system. (e.g., for systems with multiple hostnames
# and network interfaces)
ORACLE_HOSTNAME=styles-and-artists-development-oracle
# Specify the Unix group to be set for the inventory directory.
UNIX_GROUP_NAME=oracle
# Specify the location which holds the inventory files.
# This is an optional parameter if installing on
# Windows based Operating System.
INVENTORY_LOCATION=/home/oracle/oracleInventory
# Specify the languages in which the components will be installed.
# en   : English                  ja   : Japanese
# fr   : French                   ko   : Korean
# ar   : Arabic                   es   : Latin American Spanish
# bn   : Bengali                  lv   : Latvian
# pt_BR: Brazilian Portuguese     lt   : Lithuanian
# bg   : Bulgarian                ms   : Malay
# fr_CA: Canadian French          es_MX: Mexican Spanish
# ca   : Catalan                  no   : Norwegian
# hr   : Croatian                 pl   : Polish
# cs   : Czech                    pt   : Portuguese
# da   : Danish                   ro   : Romanian
# nl   : Dutch                    ru   : Russian
# ar_EG: Egyptian                 zh_CN: Simplified Chinese
# en_GB: English (Great Britain) sk   : Slovak
# et   : Estonian                 sl   : Slovenian
# fi   : Finnish                  es_ES: Spanish
# de   : German                   sv   : Swedish
# el   : Greek                    th   : Thai
# iw   : Hebrew                   zh_TW: Traditional Chinese
# hu   : Hungarian                tr   : Turkish
# is   : Icelandic                uk   : Ukrainian
# in   : Indonesian               vi   : Vietnamese
# it   : Italian
# all_langs   : All languages
# Specify value as the following to select any of the languages.
# Example : SELECTED_LANGUAGES=en,fr,ja
# Specify value as the following to select all the languages.
# Example : SELECTED_LANGUAGES=all_langs
SELECTED_LANGUAGES=en
# Specify the complete path of the Oracle Home.
ORACLE_HOME=/extended2/oracleBase/db12c1
# Specify the complete path of the Oracle Base.
ORACLE_BASE=/extended2/oracleBase
# Specify the installation edition of the component.
# The value should contain only one of these choices.
#   - EE     : Enterprise Edition
#   - SE     : Standard Edition
#   - SEONE : Standard Edition One
#   - PE     : Personal Edition (WINDOWS ONLY)
oracle.install.db.InstallEdition=SE
# PRIVILEGED OPERATING SYSTEM GROUPS                                          #
# Provide values for the OS groups to which OSDBA and OSOPER privileges       #
# needs to be granted. If the install is being performed as a member of the   #
# group "dba", then that will be used unless specified otherwise below.       #
# The value to be specified for OSDBA and OSOPER group is only for UNIX based #
# Operating System.                                                           #
# The DBA_GROUP is the OS group which is to be granted OSDBA privileges.
oracle.install.db.DBA_GROUP=osdba
# The OPER_GROUP is the OS group which is to be granted OSOPER privileges.
# The value to be specified for OSOPER group is optional.
oracle.install.db.OPER_GROUP=osoper
# The BACKUPDBA_GROUP is the OS group which is to be granted OSBACKUPDBA privileges.
oracle.install.db.BACKUPDBA_GROUP=bckdba
# The DGDBA_GROUP is the OS group which is to be granted OSDGDBA privileges.
oracle.install.db.DGDBA_GROUP=dbdba
# The KMDBA_GROUP is the OS group which is to be granted OSKMDBA privileges.
oracle.install.db.KMDBA_GROUP=kmdba
#                               Grid Options                                  #
# Specify the type of Real Application Cluster Database
#   - ADMIN_MANAGED: Admin-Managed
#   - POLICY_MANAGED: Policy-Managed
# If left unspecified, default will be ADMIN_MANAGED
oracle.install.db.rac.configurationType=
# Value is required only if RAC database type is ADMIN_MANAGED
# Specify the cluster node names selected during the installation.
# Leaving it blank will result in install on local server only (Single Instance)
# Example : oracle.install.db.CLUSTER_NODES=node1,node2
oracle.install.db.CLUSTER_NODES=
# This variable is used to enable or disable RAC One Node install.
#   - true : Value of RAC One Node service name is used.
#   - false : Value of RAC One Node service name is not used.
# If left blank, it will be assumed to be false.
oracle.install.db.isRACOneInstall=
# Value is required only if oracle.install.db.isRACOneInstall is true.
# Specify the name for RAC One Node Service
oracle.install.db.racOneServiceName=
# Value is required only if RAC database type is POLICY_MANAGED
# Specify a name for the new Server pool that will be configured
# Example : oracle.install.db.rac.serverpoolName=pool1
oracle.install.db.rac.serverpoolName=
# Value is required only if RAC database type is POLICY_MANAGED
# Specify a number as cardinality for the new Server pool that will be configured
# Example : oracle.install.db.rac.serverpoolCardinality=2
oracle.install.db.rac.serverpoolCardinality=
#                        Database Configuration Options                       #
# Specify the type of database to create.
# It can be one of the following:
#   - GENERAL_PURPOSE/TRANSACTION_PROCESSING
#   - DATA_WAREHOUSE
oracle.install.db.config.starterdb.type=GENERAL_PURPOSE
# Specify the Starter Database Global Database Name.
oracle.install.db.config.starterdb.globalDBName=cbd
# Specify the Starter Database SID.
oracle.install.db.config.starterdb.SID=cdb1
# Specify whether the database should be configured as a Container database.
oracle.install.db.ConfigureAsContainerDB=true
# Specify the Pluggable Database name for the pluggable database in Container Database.
oracle.install.db.config.PDBName=pdb1
# Specify the Starter Database character set.
# One of the following
# AL32UTF8, WE8ISO8859P15, WE8MSWIN1252, EE8ISO8859P2,
# EE8MSWIN1250, NE8ISO8859P10, NEE8ISO8859P4, BLT8MSWIN1257,
# BLT8ISO8859P13, CL8ISO8859P5, CL8MSWIN1251, AR8ISO8859P6,
# AR8MSWIN1256, EL8ISO8859P7, EL8MSWIN1253, IW8ISO8859P8,
# IW8MSWIN1255, JA16EUC, JA16EUCTILDE, JA16SJIS, JA16SJISTILDE,
# KO16MSWIN949, ZHS16GBK, TH8TISASCII, ZHT32EUC, ZHT16MSWIN950,
# ZHT16HKSCS, WE8ISO8859P9, TR8MSWIN1254, VN8MSWIN1258
oracle.install.db.config.starterdb.characterSet=AL32UTF8
# This variable should be set to true if Automatic Memory Management
# in Database is desired.
# If Automatic Memory Management is not desired, and memory allocation
# is to be done manually, then set it to false.
oracle.install.db.config.starterdb.memoryOption=true
# Specify the total memory allocation for the database. Value(in MB) should be
# at least 256 MB, and should not exceed the total physical memory available
# on the system.
# Example: oracle.install.db.config.starterdb.memoryLimit=512
oracle.install.db.config.starterdb.memoryLimit=512
# This variable controls whether to load Example Schemas onto
# the starter database or not.
oracle.install.db.config.starterdb.installExampleSchemas=true
# Passwords can be supplied for the following four schemas in the             #
# starter database:                                                           #
#   SYS                                                                       #
#   SYSTEM                                                                    #
#   DBSNMP (used by Enterprise Manager)                                       #
# Same password can be used for all accounts (not recommended)                #
# or different passwords for each account can be provided (recommended)       #
# This variable holds the password that is to be used for all schemas in the
# starter database.
oracle.install.db.config.starterdb.password.ALL=CDBadmin12345#
# Specify the SYS password for the starter database.
oracle.install.db.config.starterdb.password.SYS=CBDsys12345#
# Specify the SYSTEM password for the starter database.
oracle.install.db.config.starterdb.password.SYSTEM=PDBsys12345#
# Specify the DBSNMP password for the starter database.
oracle.install.db.config.starterdb.password.DBSNMP=DBsnmp12345#
# Specify the PDBADMIN password required for creation of Pluggable Database in the Container Database.
oracle.install.db.config.starterdb.password.PDBADMIN=PDBadmin12345#
# Specify the management option to use for managing the database.
# Options are:
# 1. CLOUD_CONTROL - If you want to manage your database with Enterprise Manager Cloud Control along with Database Express.
# 2. DEFAULT   -If you want to manage your database using the default Database Express option.
oracle.install.db.config.starterdb.managementOption=DEFAULT
# Specify the OMS host to connect to Cloud Control.
# Applicable only when oracle.install.db.config.starterdb.managementOption=CLOUD_CONTROL
oracle.install.db.config.starterdb.omsHost=
# Specify the OMS port to connect to Cloud Control.
# Applicable only when oracle.install.db.config.starterdb.managementOption=CLOUD_CONTROL
oracle.install.db.config.starterdb.omsPort=
# Specify the EM Admin user name to use to connect to Cloud Control.
# Applicable only when oracle.install.db.config.starterdb.managementOption=CLOUD_CONTROL
oracle.install.db.config.starterdb.emAdminUser=
# Specify the EM Admin password to use to connect to Cloud Control.
# Applicable only when oracle.install.db.config.starterdb.managementOption=CLOUD_CONTROL
oracle.install.db.config.starterdb.emAdminPassword=
# SPECIFY RECOVERY OPTIONS                                                    #
# Recovery options for the database can be mentioned using the entries below #
# This variable is to be set to false if database recovery is not required. Else
# this can be set to true.
oracle.install.db.config.starterdb.enableRecovery=true
# Specify the type of storage to use for the database.
# It can be one of the following:
#   - FILE_SYSTEM_STORAGE
#   - ASM_STORAGE
oracle.install.db.config.starterdb.storageType=FILE_SYSTEM_STORAGE
# Specify the database file location which is a directory for datafiles, control
# files, redo logs.
# Applicable only when oracle.install.db.config.starterdb.storage=FILE_SYSTEM_STORAGE
oracle.install.db.config.starterdb.fileSystemStorage.dataLocation=/extended1/db/data
# Specify the recovery location.
# Applicable only when oracle.install.db.config.starterdb.storage=FILE_SYSTEM_STORAGE
oracle.install.db.config.starterdb.fileSystemStorage.recoveryLocation=/extended1/db/recovery
# Specify the existing ASM disk groups to be used for storage.
# Applicable only when oracle.install.db.config.starterdb.storageType=ASM_STORAGE
oracle.install.db.config.asm.diskGroup=/dev/oracleasm
# Specify the password for ASMSNMP user of the ASM instance.
# Applicable only when oracle.install.db.config.starterdb.storage=ASM_STORAGE
oracle.install.db.config.asm.ASMSNMPPassword=ASMsnmp122345#
# Specify the My Oracle Support Account Username.
# Example   : [email protected]
MYORACLESUPPORT_USERNAME=
# Specify the My Oracle Support Account Username password.
# Example    : MYORACLESUPPORT_PASSWORD=password
MYORACLESUPPORT_PASSWORD=
# Specify whether to enable the user to set the password for
# My Oracle Support credentials. The value can be either true or false.
# If left blank it will be assumed to be false.
# Example    : SECURITY_UPDATES_VIA_MYORACLESUPPORT=true
SECURITY_UPDATES_VIA_MYORACLESUPPORT=false
# Specify whether user doesn't want to configure Security Updates.
# The value for this variable should be true if you don't want to configure
# Security Updates, false otherwise.
# The value can be either true or false. If left blank it will be assumed
# to be false.
# Example    : DECLINE_SECURITY_UPDATES=false
DECLINE_SECURITY_UPDATES=flase
# Specify the Proxy server name. Length should be greater than zero.
# Example    : PROXY_HOST=proxy.domain.com
PROXY_HOST=
# Specify the proxy port number. Should be Numeric and atleast 2 chars.
# Example    : PROXY_PORT=25
PROXY_PORT=
# Specify the proxy user name. Leave PROXY_USER and PROXY_PWD
# blank if your proxy server requires no authentication.
# Example    : PROXY_USER=username
PROXY_USER=
# Specify the proxy password. Leave PROXY_USER and PROXY_PWD
# blank if your proxy server requires no authentication.
# Example    : PROXY_PWD=password
PROXY_PWD=
# Specify the proxy realm.
# Example    : PROXY_REALM=metalink
PROXY_REALM=
# Specify the Oracle Support Hub URL.
# Example    : COLLECTOR_SUPPORTHUB_URL=https://orasupporthub.company.com:8080/
COLLECTOR_SUPPORTHUB_URL=
# Specify the auto-updates option. It can be one of the following:
#   - MYORACLESUPPORT_DOWNLOAD
#   - OFFLINE_UPDATES
#   - SKIP_UPDATES
oracle.installer.autoupdates.option=SKIP_UPDATES
# In case MYORACLESUPPORT_DOWNLOAD option is chosen, specify the location where
# the updates are to be downloaded.
# In case OFFLINE_UPDATES option is chosen, specify the location where the updates
# are present.
oracle.installer.autoupdates.downloadUpdatesLoc=
# Specify the My Oracle Support Account Username which has the patches download privileges
# to be used for software updates.
# Example   : [email protected]
AUTOUPDATES_MYORACLESUPPORT_USERNAME=
# Specify the My Oracle Support Account Username password which has the patches download privileges
# to be used for software updates.
# Example    : AUTOUPDATES_MYORACLESUPPORT_PASSWORD=password
AUTOUPDATES_MYORACLESUPPORT_PASSWORD=

This is the simplest installation you can get, but if you want to do a fast response file based installation, there it is.

HOW DO YOU CONVET AN ORACLE DATABASE FILE TO A TXT FILE?

Is there a way in a program unit of a form to convert an ORACLE database file into TXT format? When the file gets created, I want to use the text file in a distribution list for sending email. My code in the program unit is:
Insert into THE_IMO_EMAIL
Select distinct imo_email from DS_POC
where imo_email is not null;
commit;
Table THE_IMO_EMAIL is a temporary table. The temporary table gets deleted everytime before records get inserted into it. There is only 1 item in the temporary table.
IMO_EMAIL VARCHAR2(55)
After the COMMIT I want to copy the contents out of the
THE_IMO_EMAIL into a TXT File.
How do I do this? What parameters do I need to use? Should I do this in another program unit?

can you be more clear on this
"DATABASE FILE" what is this? an RDBMS file and you need this in ASCII format. I am lost.

Fast delete in Oracle database

Similar Messages

Maybe you are looking for