Fault policy files in MDS repository is not working..

Hi All,
I have created my fault policy and fault bindings file and tested in my local project. It worked fine.
To make it available in MDS,
I added the files under JDeveloperHome/jdeveloper/integration/seed/apps/faulthandling
I deployed this MDS repository to my server by the below method.
I created a new generic application, then a generic project, to which I added a new Deployment Profile of type JAR file.
To the JAR file, I added my folder in which the policy files exist. I created a SOA bundle from the ‘Applications’
Then I deployed the project to my server finally.
For all these things I refferred to
http://www.orafmwschool.com/soa-11g-mds/
Now in my adf-config.xml I have made changes as follows.
<metadata-store-usage id="mstore-usage_2">
<metadata-store class-name="oracle.mds.persistence.stores.file.FileMetadataStore">
<property value="D:\StudyForInstalling\SOA11gHome\jdeveloper\integration" name="metadata-path"/>
<property value="seed" name="partition-name"/>
</metadata-store>
</metadata-store-usage>
Then in my composite.xml I have,
<property name="oracle.composite.faultPolicyFile">oramds:/apps/faulthandling/fault-policies.xml</property>
<property name="oracle.composite.faultBindingFile">oramds:/apps/faulthandling/fault-bindings.xml</property>
I hav shutdown the partnerlink service.
Now, I can see remote exception while executing. My fault policy files are not executing.
In the same apps/ I have my PurchaseOrder.xsd file. When I tried importing the schema to my project from the mds, it is working fine.
I used like this in my wsdl.
<import namespace="http://www.order.org" schemaLocation="oramds:/apps/faulthandling/PurchaseOrder.xsd" />
Why is my faultpolicy file not working?
Kindly help me
Thanks,
Sabarisri .N

I am not sure if we can use oramds references as properties values in composite.xml. Did you try with preferences ??

Similar Messages

Fault policy files in MDS repository is not working 11g

Hi All,
I have created my fault policy and fault bindings file and tested in my local project. It worked fine.
To make it available in MDS,
I added the files under JDeveloperHome/jdeveloper/integration/seed/apps/faulthandling
I deployed this MDS repository to my server by the below method.
I created a new generic application, then a generic project, to which I added a new Deployment Profile of type JAR file.
To the JAR file, I added my folder in which the policy files exist. I created a SOA bundle from the ‘Applications’
Then I deployed the project to my server finally.
For all these things I refferred to
http://www.orafmwschool.com/soa-11g-mds/
Now in my adf-config.xml I have made changes as follows.
<metadata-store-usage id="mstore-usage_2">
<metadata-store class-name="oracle.mds.persistence.stores.file.FileMetadataStore">
<property value="D:\StudyForInstalling\SOA11gHome\jdeveloper\integration" name="metadata-path"/>
<property value="seed" name="partition-name"/>
</metadata-store>
</metadata-store-usage>
Then in my composite.xml I have,
<property name="oracle.composite.faultPolicyFile">oramds:/apps/faulthandling/fault-policies.xml</property>
<property name="oracle.composite.faultBindingFile">oramds:/apps/faulthandling/fault-bindings.xml</property>
I hav shutdown the partnerlink service.
Now, I can see remote exception while executing. My fault policy files are not executing.
In the same apps/ I have my PurchaseOrder.xsd file. When I tried importing the schema to my project from the mds, it is working fine.
I used like this in my wsdl.
<import namespace="http://www.order.org" schemaLocation="oramds:/apps/faulthandling/PurchaseOrder.xsd" />
Why is my faultpolicy file not working on MDS? But, if pput the file on the source code this working fine, but get the policy to source not from MDS?
Help me

It could mean that the location for MDS in the code isn't correct.
Can you re-verify the path provided for MDS?

SOA BPEL 11g (11.1.1.3.0) - Using encapsulated retries in fault-policy file

Hi,
We are using oracle SOA suite 11g (11.1.1.3.0)
I'm trying to configure a fault-policy file so that it first retries 20 times every 20 secs, then reties 20 times every 10 minutes, then retries 23 times every hour, then retries 24 times every 6 hours and if the fault persists call a java action to send an email and then go to human-intervention. It seems however that only the first retry is executed. The rest ones are ignored and the action following the first retry failure is the Java Action. The fault-policy is as follows:
<?xml version="1.0" encoding="UTF-8"?>
<faultPolicies xmlns="http://schemas.oracle.com/bpel/faultpolicy">
<faultPolicy version="0.0.1" id="TransferResponsibilityRequestProcessFaults"
xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns="http://schemas.oracle.com/bpel/faultpolicy"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Conditions>
<faultName xmlns:freeze="http://rom/cosmote/bpel/webservice/util" name="freeze:BpelWSFault">
<condition>
<action ref="ora-human-intervention"/>
</condition>
</faultName>
<faultName xmlns:retry="http://rom/cosmote/bpel/webservice" name="retry:PendingRequestsFault">
<condition>
<action ref="ora-retry-20sec"/>
</condition>
</faultName>
</Conditions>
<Actions>
<Action id="ora-retry-20sec">
<retry>
<retryCount>10</retryCount>
<retryInterval>20</retryInterval>
<retryFailureAction ref="ora-retry-10min"/>
</retry>
</Action>
<Action id="ora-retry-10min">
<retry>
<retryCount>10</retryCount>
<retryInterval>600</retryInterval>
<retryFailureAction ref="ora-retry-1hour"/>
</retry>
</Action>
<Action id="ora-retry-1hour">
<retry>
<retryCount>23</retryCount>
<retryInterval>3600</retryInterval>
<retryFailureAction ref="ora-retry-6hour"/>
</retry>
</Action>
<Action id="ora-retry-6hour">
<retry>
<retryCount>24</retryCount>
<retryInterval>21600</retryInterval>
<retryFailureAction ref="ora-java"/>
</retry>
</Action>
<Action id="ora-java">
<javaAction className="gr.cosmote.bpel.util.JavaActionInCaseOfRetryFails"
defaultAction="ora-human-intervention">
<returnValue value="RETURNED" ref="ora-human-intervention"/>
</javaAction>
</Action>
<Action id="ora-human-intervention">
<humanIntervention/>
</Action>
</Actions>
</faultPolicy>
</faultPolicies>
Is retrying with various intervals only done by using the tag <exponentialBackoff/>?
Thanks for any response.

I had a similar requirement, although not as elaborate as yours. After I failed to figure it out myself I filed a SR. Basically, you cannot restart a retry block after the first execution to avoid an infinite loop.
If you need to send the e-mail after the 23rd hour, why not just retry until the 23rd hour and send an e-mail?

XPath expression test possibilities in Fault Policy file

Hi All,
It would be a great help if someone can show me a way to implement the next case:
I have the next scenario, in a fault policies file I have different actions to execute for the same fault andI have to choose what action will be executed checking a value that has not relation with the $fault variable. The value indicates the number of retries that I have to try the invocation. This is the code, but this code is not working. Anybody knows how to declare the variable to be accesible in the fault policy?
Thanks in advance,
<Conditions>
<faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension" name="bpelx:remoteFault">
<condition>
<test>$Var=1</test>
<action ref="ora-retry-one"/>
</condition>
<condition>
<test>$Var=2</test>
<action ref="ora-retry-two"/>
</condition>
<condition>
<test>$Var=3</test>
<action ref="ora-retry-three"/>
</condition>
</faultName>
<Conditions>
<Actions>
<Action id="ora-retry-one">
<retry>
<retryCount>5</retryCount>
<retryInterval>2</retryInterval>
<exponentialBackoff>1</exponentialBackoff>
</retry>
</Action>
<Action id="ora-retry-two">
<retry>
<retryCount>7</retryCount>
<retryInterval>2</retryInterval>
<exponentialBackoff>1</exponentialBackoff>
</retry>
</Action>
<Action id="ora-retry-three">
<retry>
<retryCount>9</retryCount>
<retryInterval>2</retryInterval>
<exponentialBackoff>1</exponentialBackoff>
</retry>
</Action>
</Actions>
</faultPolicy>
</faultPolicies>

Hi,
Here is an example of the possible solution:
In fault policy file:
<Conditions>
<faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
name="bpelx:remoteFault">
<condition>
<test>"my_xpath:getRetryCount()=number(1)"</test> (getRetryCount is a custom XPath that returns the number of retries)
<action ref="ora-retry_1"/>
</condition>
<condition>
<test>"my_xpath:getRetryCount()=number(2)"</test>
<action ref="ora-retry_2"/>
</condition>
<condition>
<test>"my_xpath:getRetryCount()=number(3)"</test>
<action ref="ora-retry_3"/>
</condition>
<Actions>
<Action id="ora-retry_1">
<retry>
<retryCount>1</retryCount>
<retryInterval>1</retryInterval>
<exponentialBackoff>1</exponentialBackoff>
</retry>
</Action>
<Action id="ora-retry_2">
<retry>
<retryCount>2</retryCount>
<retryInterval>1</retryInterval>
<exponentialBackoff>1</exponentialBackoff>
</retry>
</Action>
<Action id="ora-retry_3">
<retry>
<retryCount>3</retryCount>
<retryInterval>1</retryInterval>
<exponentialBackoff>1</exponentialBackoff>
</retry>
</Action>
The problem of this solution is that the number of retries is finite but I don't know other way to do it.
Cheers

Why while in Bridge Load Files into photoshop Layers does not work?

In Bridge, Tools>Photoshop>Load Files into Photoshop Layers does not work. I have two images selected and when I execute that comman in Bridge nothing happens. I exited and restarted both PS and Bridge and still nothing. I am working in Windows 7 and Photoshop cs6.

No I tried File/scripts/load file into stack and still did not work.
There was an update to bridge and now it works. Thanks so much.

Power book G4 Leopard 10.5.8. File sharing preference checked but not working after start up until unchecked and the rechecked?

I hope the title is enough info, please ask. In the mean time I have created an applescript to open preferences/ sharing and uncheck then check the file sharing box. This works but I would obviously prefer it just work normally. I have no corrupt preference files. Perhaps a file is missing? Thank you.

Greetings Kwnez
I'm not up to your level of expertise yet. I'm networking and file sharing too, on my Mac Powerbook 1.33 GHz PowerPC G4; OS 10.5.8 Lepoard. At the public library I found by asking the clerk a book Authored by David Pogue. "Mac OS X Leopard the Missing Manual". It (the book) has helped me ask better questions. I'm not saying that your question "
Power book G4 Leopard 10.5.8. File sharing preference checked but not working after start up until unchecked and the rechecked?
is hard for me to understand, I went to system preferences and looked at the sharing box. when I clik it it opens up and the first thing I see is my computers name, and under that i see, " Computers on your local network can access your computer at: ...-powerbook-g4-15.local"
What I'm saying is "Are we on the same Page"

PS CS3 not recognizing Raw Files and converters Ive downloaded not working..Why not?

PS CS3 not recognizing Raw Files and converters Ive downloaded not working..Why not?

Do you seriously think we can answer that with zero information from you?
Please give us:
Operating System/version
Photoshop version number
Amount of RAM installed
Hard drive(s) free capacity
Video card make and model
Camera make and model
Then describe what you have done so far and the symptoms you are seeing.

Uploading Files Using InputFile Component -- Sometimes not working

Hello,
This is the 2nd time I make a post about it!
Because I have more than 1 application using upload, and everything is correct! But it doesn't work as it should!
You can check the original post here: Uploading Files Using InputFile Component - Sometimes not working
I need a solution please!
The only thing we can conclude is that it could be a bug from oracle !!! (???) But I talked with other people and they say that it works fine for them.
There is one important thing: when we put a form to "Uses Upload = true" it seems that the page doesn't work very normal. For exemple: if you use a table in a form that uses upload the table get's "crazy".
Thanks,
JP

I have now access to METALINK!
I can find some problems and patches about inputFile but not mine! I will check better later!
I think the problem is caused because of my framework!

Fault policies locaton and test xpath conditions not working.

I cant place fault policies files in a non mds location or the composite directory.
For example it does not work with an /opt/...... server path in the composite.xml property.
Also, I can't get working xpath test expressions like this:
<condition>
<test xmlns:elem="http://na.telefonica.com/elementoscomunes">$fault.fault0/elem:AREA_ERROR/ErrorType = "F"</test>
<action ref="reintentos-neon"/>
</condition>
In jdeveloper, the part is "fault0", and the subelements are like i've showed, but the condition never matches.
I saw in a forum that the sintax was $fault.nameofpart/xpathexpression, but doesn't seem to work. I've tried lots of permutations of the syntax, and also with 'F' instead of "F".
¿Any Idea?

This is the exception in the server GUI
<fault>
<bpelFault>
<faultType>1</faultType>
<OBA_Par_Alta_AveriaFault>
<part name="fault0">
<elem:AREA_ERROR>
<ErrorID>8888</ErrorID>
<ErrorType>F</ErrorType>
<ErrorDesc>Afsafds</ErrorDesc>
</elem:AREA_ERROR>
</part>
</OBA_Par_Alta_AveriaFault>
</bpelFault>
</fault>

Excel File read using WebUtil does not work. Gives java.lang.NoSuchMethodEr

We have a form which reads from an Excel File. The form works in development env., but in the live env when we deployed the form it does not work. Form fails @ the 1st call to Client_OLE2 where we set the Excel file to read.
For both the envs. the values are given here:
(1.) Client Forms Version : Forms [32 Bit] Version 10.1.2.0.2 (Production)
(2.) Application Server Version : 10.1.2.0.2
(3.) AS Linux Version : (Live) RHEL 5.7 Tikanga / (Dev) Red Hat Enterprise Linux AS release 4 (Nahant Update 4)
(4.) Client Sun JRE Version :Version 1.5.0 (build 1.5.0_10)
(5.) Client Web Browser & Version: I.E 8.0.6001 or Mozilla 3.0.15
(6.) WebUtil Version: 1.0.6Both envs. are the same except the Linux version.
Works fine in Dev but does not work in Live. Other Webutil functions like file open dialog box works fine in live, only this Excel read is not working.
Full Error message
Java Plug-in 1.5.0_10
Using JRE version 1.5.0_10 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\dinesha.IIL
c:   clear console window
f:   finalize objects on finalization queue
g:   garbage collect
h:   display this help message
l:   dump classloader list
m:   print memory usage
o:   trigger logging
p:   reload proxy configuration
q:   hide console
r:   reload policy configuration
s:   dump system and deployment properties
t:   dump thread list
v:   dump thread stack
x:   clear classloader cache
0-5: set trace level to <n>
RegisterWebUtil - Loading WebUtil Version 1.0.6
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
Forms Applet version is : 10.1.2.0
Exception in thread "AWT-EventQueue-3" java.lang.NoSuchMethodError:
com.jacob.com.Dispatch.put(Ljava/lang/Object;Ljava/lang/String;Ljava/lang/Object;)V
     at
oracle.forms.webutil.ole.OleFunctions.set_obj_property(OleFunctions.java:1216)
     at
oracle.forms.webutil.ole.OleFunctions.setProperty(OleFunctions.java:333)
     at oracle.forms.handler.ComponentItem.setCustomProperty(Unknown Source)
     at oracle.forms.handler.ComponentItem.onUpdate(Unknown Source)
     at oracle.forms.handler.JavaContainer.onUpdate(Unknown Source)
     at oracle.forms.handler.UICommon.onUpdate(Unknown Source)
     at oracle.forms.engine.Runform.onUpdateHandler(Unknown Source)
     at oracle.forms.engine.Runform.processMessage(Unknown Source)
     at oracle.forms.engine.Runform.processSet(Unknown Source)
     at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
     at oracle.forms.engine.Runform.onMessage(Unknown Source)
     at oracle.forms.engine.Runform.processEventEnd(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown
Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)We connected to Live AS server via VPN and ran the Form in a client machine (where the Dev. is working) but same problem.
Any help would be greatly appreciated.

Channa,
I sounds like you might have missed a configuration step on your Linux application server (AS). I recommend you go back through the configuration of your AS and verify each step of the WebUtil Runtime Setup Checklist was completed correctly. Seach the Forms Help system on "Runtime Setup Checklist" for a copy of the checklist.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

File Upload UI element is not working properly inside Table Popin container

Hi Expert,
I created a table with popin, i placed file-upload UI element inside table popin contatiner.
The file upload UI element is displaying properly but, when i click the browse button to select the file, the file open dialog box is not popping out.
will table popin support file-upload UI element inside it?
it not is there any other way to call a file_open dialog box from inside the table popin.
Thanks,
James

If you are on NetWeaver 7.01, you can try both the ACFUpDownload UI element or try creating your own FileUpload in Adobe Flex with Flash Islands. ACFUpDownload requires the KPRO by default (which is why the same application isn't working for you), but you can write your own handler class to act as the KPRO receiver. Here is an eLearning on the topic:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/109b9b52-bc00-2c10-8786-e4c5e96d7e04
and source code:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70645070-bb00-2c10-f086-f126721acdb4
If you want an eLearning on the FlashIslands approach, you can find it here as well:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50d42644-91ef-2b10-228c-9e0ae75b274e
and Source Code:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f044b62c-90ef-2b10-64a6-9ec25294d133
However in both of these approaches you still have to be careful with how you handle large files. The problem is that they are processed often a single binary string. This makes the processing easy, but requires total amount of session memory at least as large as the file being uploaded. In NetWeaver 7.02 ABAP adds the concept of Streams and Locators to help with the partial processing of large files. This feature doesn't come until later this year, but if you are interested you can learn about it here:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80f983df-213e-2c10-ba89-b5a12ef178e8

Sender file adapter - filename containing * does not work

Hi All,
I am doing simple file-file scenario wherein my filename is something like
MATMAS05_XI20070911-150159-088.xml
there are many files having similar kind of name which are supposed to be picked
so simply I can go on writing <b>MATMAS05_XI*.xml</b> in filename
it is not working.. communication monitoring gives error <i>Error occurred while connecting to the FTP server "10.25.117.237:21": java.lang.NullPointerException</i>
But when I use character '?' then it works fine - '?' placeholder for each extra character
I am on SP 20.My adapter is configured properly. FTP server working fine with '?' or simple filename. So bit confused why it is not working with *
Are there some BASIS settings which have to be in place to work it out with * ?
All your inputs are welcome !!
Thank You,
Mugdha kulkarni

Hi
this error is not related to multimple files or sending with the * char.. you can use it
see the below link
/people/mickael.huchet/blog/2006/09/18/xipi-how-to-exclude-files-in-a-sender-file-adapter
The error related to the server connection.. also check the ip address is correct or not you configured correctly or not..
also clarfity the correct error description ..
Chilla

File Upload Action Button are not working

Hi ,
In the File Upload Process when the processor are open change request there are Action Buttons Approve/Reject ,
When the CR Processor are Click on either Approve or Reject these two Action Button are not working (means its not show any activity) , while rest of all action button like save,close check , Run validation are working ...
While Processor has authorization to Approve/Reject that CR ...

Hello Nikhilesh
These buttons are dependent upon the workflow steps. Check that. Check the linkage for workflow. Check SWI6 - CR number and the step. Based on the step you can identify whether the proper step is assigned or not.
Thanks
Kiran

File too large - attachment settings not working

Hi there
We are having problems with attaching files in IMS 5.2 & wondered if anybody can help.
Our outgoing mail message max size is set to 50MB (I know about the extra 33% space required for encoding) and yet we still cannot attach files to emails that are greater than 5MB.
Does anyone have any idea why this is not working?
Anytime we try to send a 7 or 8 MB file an error "File too large "comes up right away
The settings in the messaging server console is set to 50MB. This is under the HTTP service
There was a previous post but the solution did not solve my problem.
Can anyone help?
Thanks

There are separate settings for webmail attaqchments. Please check documentation at:
http://docs.sun.com/source/816-6020-10/cfgutil.htm
and look at:
service.http.maxmessagesize
and
service.http.maxpostsize
these both default to 5 megs.
You have to restart the webmail daemon to make a change take effect.

File sharing with MBP does not work

The problem is that I cannot connect to my first-gen MacBook Pro from my 2 Ghz Intel iMac in my own home network. I have tried opening all ports in the sharing menu without success. The laptop shows up in the finder window but no connection is made. There is not even an error message. It simply says (after a long while) that the connection failed. Nothing even happens when I try to click on the "connect as" button. This is true for file sharing and screen sharing. I can connect to the iMac from the laptop, ironically enough. I was able to connect both ways at one point. My set-up is as follows: airport express connected to modem/router; iMac and laptop connected wirelessly to airport express. Any ideas would be great. I am at a complete loss as the laptop has no other connection issues of any kind.
Update: I just got an error message for the first time: The server may not exist or it is not operational at this time. Check the server name or IP address and your network connection and try again.

Connecting via "connect to server" in finder menu using afp does not work either. FYI. It just tries connecting for a long while and then gives me the following error (-36). The finder cannot complete the operation because some data in "afp://....." could not be read or written.

Fault policy files in MDS repository is not working..

Similar Messages

Maybe you are looking for