FB4 errors will not go away when opening project with FB3

I decided to download FB4 and I opened a project that I had been working on in FB3 and I got these errors:
The style 'backgroundGradientAlphas' is only supported by type 'mx.core.WindowedApplication' with the theme(s) 'halo'.  I found out how to fix this in FB4, but I decided it would be too much trouble to try to convert this project, so I decided to go back to FB3 to finish it. So I opened the project with my FB3 and the errors are still there.
How can I get these to go away?

You don't have to convert the project, you can still use SDK 3.
1) Project properties > Flex Compiler
2) Under Flex SDK version, choose Flex 3.5
You can also import older SDKs in Window > Preferences > Flash Builder > Installed Flex SDKs.
I'm not sure how you would see compiler errors from FB4 in FB3 unless you were somehow sharing the same workspace in both. Sharing a workspace in that way is unsupported.
Jason San Jose
Software Engineer, Flash Builder

Similar Messages

  • My ipad will has a pop-up that will not go away when I click ok, and makes it completely impossible to use the ipad. The pop-up says: iCloud Backup: This ipad has not been backed up in 6 weeks. Backups happen when this ipad is plugged in, locked, and conn

    My ipad will has a pop-up that will not go away when I click ok, and makes it completely impossible to use the ipad. The pop-up says "iCloud Backup: This ipad has not been backed up in 6 weeks. Backups happen when this ipad is plugged in, locked, and connected to Wifi." I do not know what to do.

    Same situation.  Had to pull out the Mini to research this.  The Apple logo has been on the screen about five min, oh, just went black.  Home brought it back and popup is gone.  Wonder why this happened to many folks.

  • Do Not Disconnect Will Not Go Away When I Plus IPod into Computer

    I have had my Ipod 30gb for some time now and i was using it earlier today just fine. Then ITunes froze on me so i say okay i will ctrlaltdelete and re open. Now when i plug my ipod into my computer (using a USB 2 and original cable) it will not recognize my Ipod and being plugged in and the ipod screen read "Do Not Disconnect" and will stay there. (Its been on that screen since i started looking up ways to fix it)I re-installed Itunes and when i plug my Ipod into a friend computer it reads mt Ipod just fine. What can i do to make my ipod stop this non sense so i can continue updaing it with new songs.
    P.S. My Ipod works just fine when I unplug it from the USB.

    If iTunes isn't ejecting the iPod correctly, you can do it through the My Computer menu. Open My Computer, find your iPod, right click, and press 'eject'. It works the same as if you ejected it wil iTuunes. If that dosent work, try the 'safely remove hardware' program in the toolbar that appears when you plug the iPod in.
    Kovu

  • Suddenly, Firefox will not launch. When I try with the Task Manager up, it never appears on the list of applications.

    On a desktop PC running Windows XE, FF will not launch. Has been working very well since we installed FF two weeks ago and made it our default browser. IE launches normally allowing me to post this question. On my laptop, on the same wireless connection, FF works fine. I have rebooted several times. Everything seems normal except for FF. I have run PC Doctor and have fixed all problems that came up. McAfee finds no problems.

    Update: After a very long time, perhaps 15 minutes or more, the FF screen comes up blank with the "loading..." message on the first tab. Also, because I tried several times to launch FF, more such screens came up with the same result. My home page never loads. If I stop page loading and try another web site I get the same result.

  • Ical appears translucent in dock and will not show events when opened

    Has anyone recently experienced iCal appearing translucent in the dock? This is weird and just recently started happening. Once iCal is launched it appears normal in the dock but goes back to translucent when I quit. Our MacBook Pro is brand new just a few weeks old and all the software is up to date. Also, even weirder, suddenly the events are not showing up in the month view when launched. I can go back to December and then move to January and then they appear. I made sure that the preferences are checked to show times and that in View "show the to do list" is selected. Whenever it has been launched the calendar is blank and will only show events after view or preferences have been manipulated. Any help would be appreciated..

    kkovardfd,
    Welcome to Apple Discussions.
    Do you have any duplicate fonts? If so, make sure to resolve duplicates with Font Book.
    Remove the iCal icon from the Dock, and replace it with the iCal Application located in your Applications folder.
    Open System Preferences...>Language & Text>Formats> and set/re-set your appropriate "Region."
    After deleting the iCal plist, also delete the com.apple.Dock.plist, log out/in from your account, or restart the computer. Your Dock will revert to default appearance.

  • Error message: Table could not be found when opening reports with InfoView or CMC

    Post Author: Giovanni
    CA Forum: Authentication
    Hi All,
    I have Crystal Reports Server XI R2 installed on a server and the database folder (foxpro) is located on a different server. Crystal is connected to the database using an ODBC connection (UNC path).
    When I try to preview a report in Infoview or CMC I get the following error: "There was an error retrieving data from the server: The table 'dp' could not be found. Error in File C:\WINDOWS\TEMP\{BC665D6D-95DE-426B-A7A2-EBF9D23F42F4}.rpt: The table could not be found."
    dp is the name of one of our tables.
    If I publish a report that uses sql database or a foxpro db that is located on the same server as Crystal Server I donu2019t receive any error message..
    Please help if you can and thanks in advance.
    Giovanni

    Post Author: colin mackenzie
    CA Forum: Authentication
    Hi Giovanni.
    This post of yours is going on 2 weeks old.
    Have you solved your problem?

  • Iphone will not update 3002 error will not go away

    I was in the middle of upgrading Iphone 4 to IOS 5 when I lost power, upon regaining power attempted to upgrade againn now I can't upgrade. Everytime I try to upgrade or restore, it gives me a 3002 error. I've tried a hard reset, backed up everytime, even tried on a different laptop. I've came to the conclusion it's a problem with the phone, not the software and all but given up on updating it. ANY IDEAS????????????? Not desparate, but would like to update it.
    BIZZY

    Resolve iOS update and restore errors
    If you can't update or restore your iPhone, iPad, or iPod touch

  • Attempted to create a slideshow (version 9.3) and get the dreaded twiling ball that will not go away; iphoto locked up when open.  how do I get rid of the ball.  Have forced quit seveal times and opens with the ball p

    Attempted to create a slideshow (version 9.3) and get the dreaded spinning ball that will not go away; iphoto locked up when open.  how do I get rid of the ball.  Have forced quit seveal times and opens with the spinning ball.

    Make a temporary, backup copy if you don't have a backup copy of the library (select the library and type Command+D) and  apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Since only one option can be run at a time start with Option #1, followed by #3 and then #4
    Launch iPhoto and try again.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • Display "Application over 20MB" when I type OK button, the appearance will not go away and make me unable to open other applications, what to do and whether it must be restarted

    display "Application over 20MB" when I type OK button, the appearance will not go away and make me unable to open other applications, what to do and whether it must be restarted?

    The 20 meg message is the download limit for 3G. If you can't get rid of the 'OK' message then you can do a reset by pressing and holding both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    You should be able to download the apps by switching to wifi on your iPad or downloading them on your computer's iTunes and syncing them or dragging and dropping them over to the iPad device.

  • Removed working Firefox 7, Installed Firefox 10.0, Firefox will not load. When I click on icon, firefox.exe process shows briefly in task manager, then goes away....no errors, nothing

    Removed working Firefox 7, Installed Firefox 10.0, Firefox will not load. When I click on icon, firefox.exe process shows briefly in task manager, then goes away....no errors, nothing. Never see browser panel at all. Also tried to install Firefox 9.0, but the same result was observed.

    Rather difficult to say what the problem may be at present but for general info please have a look at
    * [[safe mode]]
    *[[firefox will not start]]
    *[[firefox hangs]]
    Note sometimes you may have to wait a while for firefox to shutdown completly, and if it has hung then as explained in the above articles you may need to kill any firefox.exe process that is still running (and maybe plugincontainer.exe)
    Try starting firefox in [[safe mode]] e.g. by holding down shift key
    * do not make any changes in the first window, just click on continue<br/> ? Do you get as far as seeing the options window for safe mode ?
    If firefox is crashing see [[firefox crashes]], this is easier to work through if you can get firefox to start without crashing on startup. Currently some firefox users are finding Firefox 10 crashes on startup, and a new version Firefox 10.0.1 is being released very soon to deal with this and another cause of hangs.
    Not saying any of this applies to your case but recent issues include
    * ask tool bar causing hangs if video is used none English versions [/forums/contributors/708073]
    * possibly some crashes do not start the crash reporter and other issues [/forums/contributors/708122?page=2#post-45059]
    * some general info about current crashes [/questions/917748#answer-308124]

  • I have a box that will not go away, it says,  "To open JavaApplication, you need to install a Java SE 6 runtime.  Would you like to check for and install one?  If i push not now, it keeps popping up, if I push install, it says it's not available, help.

    I have a dialogue box that will not go away and it seems to have started when I upgraded to Mt. Lion.  the box says, "To open JavaApplication, you need to install a Java 6 SE runtime.  Would you like to check for and install one?  (smaller print)  Note: Usw of this software is subject to the Software License Agreement applicable to the software you are downloading.  A list of Apple SLAs may be found here: htp://www.apple.com/legal/sla/
    Finally there are two boxes to click.  One says not now.  If I click on that the box goes away for 2 to 3 seconds and then pops back up and WILL NOT go away.  If I click on the second box, Install, it says  The software is currently unavailable.  To install a Java SE 6 runtime later, open Java Application again.
    My confusion here is that I have no idea what the java application is, When I click "okay" on that box, the original box pops us again and WILL NOT go away. CGoing to the apple lega web site was no help.  My solution so far has been to drag the dialogue box as far to the lower right and out of the way as far as I can.  Help.

    Does this happen immediately after you log in? If so, one of your login items is probably causing it.

  • Bridge CC on opening gives "Adobe Bridge CC has stopped working" Uninstalled, re-installed same error, will not run. "check online for a solution" does nothing.

    Bridge CC on opening gives "Adobe Bridge CC has stopped working" Uninstalled, re-installed same error, will not run. "check online for a solution" does nothing.
    Bridge worked great for a while then started to fail when starting. Old Bridge CS6 still works fine. HELP ... please.

    You problem is in the Fault Module MSVCR80.dll
    Do a web search for this.  Here is one LINK

  • The beach ball will not go away.  It is acting as the cursor in all open programs.  I know summer starts this week but this is ridiculous!

    The beach ball will not go away.  It is acting as the cursor in all open programs.  I know summer starts this week but this is ridiculous!
    thanks Denise

    This just happened here twice to. Was working in Photoshop CC on my Cintiq HD24 Touch when the cursor turned into a static beach ball. First time i ended up rebooting (really annoiying). Second time i opened Chrome to google this bug. Somewhere in the process of searching information my cursor changed back to an arrow???
    Using Mavericks on a rMBP mid 2012, Photoshop CC and a Wacom Cintiq HD24 Touch. Did not experience this before working on the Cintiq.
    Just letting you know.

  • 1600 all-in-one series printer error message to remove and check color cartridge will not go away

    Error message, remove and check color cartridge will not go away even after replacing cartridge (same refilled).  Any help would be appreciated.

    I had the very same problem with my HP Officejet 7410 so cleaned the ink cartridge and carriage contacts per the directions listed on this link: 
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01423559&tmp_task=solveCategory&cc=us&dlc=en&la...
    After my first attempt at cleaning these contacts, i reinserted the cartridge and tried printing again but I got the same error message.  Next I removed both cartridges (color & black) from their slots and after pointing a flashlight at the carriage I discovered the bottom of the carriage was covered with ink, so....using over a dozen cotton swabs I cleaned the bottom of the carriage as best i could.  Also, thinking that perhaps the ink cartridge was not manufactured exactly to its proper size and shape, when i inserted the cartridges back into their slots I slightly pressed them in to be sure the contacts would touch. 
    I was happy to see that now the error message is gone and my printer is printing again....well, at least for now.

  • My Iphone 4 will not start up, when i connect it to itunes i says : Activation error This device is not registered as part of the iPhone Developer Program.If you are a member of the Program, please register your device in the iPhone Developer Program Port

    my Iphone 4 will not start up, when i connect it to itunes i says : Activation error This device is not registered as part of the iPhone Developer Program.If you are a member of the Program, please register your device in the iPhone Developer Program Port

    Well, you downloaded a bootleg copy of iOS 7 beta and have installed it on your phone without being a developer. It has bricked your phone and you cannot get help here because doing what you did has voided your warranty. Have a nice day.

Maybe you are looking for