FB50: Trading Partner error
Hello Gurus-
In testing, when the user enters line items, 2 of which a trading partner was entered. We left the other 2 entries blank inb trading partner. When the transaction is posted, all 4 line items have a trading partner which is not what we wanted.
how do we fix that?
Hi,
This is from the document type settings (OBA7).
It is controlled by the flag Inter-company Postings.
If this is not set:-
a) Trading partner will be copied from eg Customer / Vendor.
b) The same TP must be in all line items.
If set:-
a) TP will not be copied from Customer / Vendor
b) The TP is permitted to be different in each line item.
In is advisable to use seperate Document types for when this flag is set.
Kind regards
Similar Messages
-
hi
can any body tell me the solution that in vendor balance report one of the property trading partner is missing of one particular vendor i saw the date of creation of vendor master in r/3 it was already been updated, then in bw side i checked the master data
i found an error i fixed it up but sitll it is dhowing hash can any body tell me that will this record will updated in the next load or before
thanksHi,
After making required changes to the master data in Bw side, did you run the attribute changerun program?
Try running the attribute change run program which may help you.
For running attribute change run, go to se37 and run the program "RSDDS_AGGREGATES_MAINTAIN".
give your infoobject as input and execute.
hope this helps,
Regards,
Sri... -
Validation Rule for making Trading Partner mandatory in FB50
Hi,
Validation Rule for making Trading Partner mandatory in FB50
I am trying to make trading field mandatory in FB50. If trading partner is not entered for the line items in FB50, User should get a error
I have tried the follwiong (at the Line Item level) and it does not work:
1)
Prerequiste:
Transaction code = 'FB50'
Check:
Trading Partner = ''
Message:
2)
Prerequiste:
SYST-TCODE = 'FB50'
Check:
Trading Partner = ''
Message:
Any ideas?The message will only be issued when the result of the check is false. If you want to issue an error when a trading partner value is not entered, then your check needs to be Trading partner <> ''. If the user enters a Trading partner value, the check will be true and no message will be issued. If the user does not enter a Trading partner, the check will be false and the message will be issued.
-
Error validating TP...AIP-11052: Writing following objects: Trading Partner
Hi,
I am getting following error validating trading partner. I have double checked the TP setup, everything looks fine. I had earlier successfully validated, later added a document type and trying to re-validate.
AIP-11052: Writing following objects: Trading Partner failed due to following constraint violation: PARTY. CAN NOT UPDATE UNVERSIONABLE OBJECT IN A VALIDATED CONFIGURATION
Does anyone have any clues??
Thanks
VenkatMake sure you do not have active configuration which is using this agreement.
-
Error -: AIP-16012: Parameter: trading Partner is unique for object Trading
Hi Gurus,
When I go to rename the b2b server under trading partners, I receive the following error:
An error occurred when updating the trading partner.
1. Error -: AIP-16012: Parameter: trading Partner is unique for object Trading Partner Identification
2. TradingPartner.TradingPartner - Error -: AIP-11052: Writing following objects: Trading Partner Identification failed due to following constraint violation: TRADINGPARTNERIDENTIFICATION_UK. UNIQUE CONSTRAINT VIOLATION
3. PartyIdentificationType.TradingPartnerIdentificationType - Error -: AIP-11052: Writing following objects: Trading Partner Identification failed due to following constraint violation: TRADINGPARTNERIDENTIFICATION_UK. UNIQUE CONSTRAINT VIOLATION
4. Value - Error -: AIP-11052: Writing following objects: Trading Partner Identification failed due to following constraint violation: TRADINGPARTNERIDENTIFICATION_UK. UNIQUE CONSTRAINT VIOL
This occurs after I purge the b2b and even manually delete the trading partner that has the name that I require to change the server to (required for quality assurance testing). When I check the identifiers, there are two name ones (one of them is the one I am trying to change to) but I cannot delete any of them as it is grayed out.
Any thoughts?
Thanks
Gerald
Edited by: Gerald M. on Nov 30, 2009 8:50 AM -addtional infoSolved the issue, I manually delete entries in b2b.tip_tradingpartneriden_aud and b2b.tip_tradingpartneridentifica_t.
Is this safe to be doing this?
Thanks
Gerald -
AIP-52251: Error identifying remote trading partner at MLLP Exchange with
used HL7 over MLLP, one trading partner is EAI(B2B Localhost), another is EchoServer(a java application, the hostname is is4-nb4.corp.ha.org.hk). used a script to enqueue message. like below:
DECLARE
enqueue_options dbms_aq.enqueue_options_t;
message_properties dbms_aq.message_properties_t;
msg_handle RAW(16);
ipmsg b2b.IP_MESSAGE_TYPE;
xml_clob clob;
msg_id number(10);
subscribers dbms_aq.aq$_recipient_list_t;
BEGIN
select message_seq.nextval into msg_id from dual;
xml_clob := '<?xml version="1.0" ?><ADT_A01 xmlns="http://www.edifecs.com/xdata/200" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" XDataVersion="2.0" Standard="HL7" Version="2.3.1" CreatedDate="2005-08-16T16:52:26" CreatedBy="ECXEngine_826" GUID="{1A2726C6-B00E-DA11-8F7A-080020C8D296}"><MSH><MSH.1>|</MSH.1><MSH.2>^~\&</MSH.2><MSH.3><HD.1>EDI</HD.1></MSH.3><MSH.4><HD.1>PWH</HD.1></MSH.4><MSH.5><HD.1>EchoPac</HD.1></MSH.5><MSH.6><HD.1>PWH</HD.1></MSH.6><MSH.7><TS.1>20050804162010</TS.1></MSH.7><MSH.8 xsi:nil="true"></MSH.8><MSH.9><MSG.1>ADT</MSG.1><MSG.2>A01</MSG.2></MSH.9><MSH.10>TEST007</MSH.10><MSH.11><PT.1>#Property(ProcessingID)#</PT.1></MSH.11><MSH.12><VID.1>2.3.1</VID.1></MSH.12><MSH.13 xsi:nil="true"></MSH.13><MSH.14 xsi:nil="true"></MSH.14><MSH.15>AL</MSH.15><MSH.16>ER</MSH.16><MSH.17>#Property(CountryCode)#</MSH.17><MSH.18>ASCII</MSH.18><MSH.19><CE.1>ENG</CE.1></MSH.19></MSH><PID><PID.1>1</PID.1><PID.2 xsi:nil="true"></PID.2><PID.3><CX.1>A0000010</CX.1></PID.3><PID.4 xsi:nil="true"></PID.4><PID.5><XPN.1><FN.1>TEST, Patient 01_10</FN.1></XPN.1></PID.5><PID.6 xsi:nil="true"></PID.6><PID.7><TS.1>20001001</TS.1></PID.7><PID.8>F</PID.8></PID><PV1><PV1.1>1</PV1.1><PV1.2 xsi:nil="true"></PV1.2><PV1.3 xsi:nil="true"></PV1.3><PV1.4 xsi:nil="true"></PV1.4><PV1.5 xsi:nil="true"></PV1.5><PV1.6 xsi:nil="true"></PV1.6><PV1.7 xsi:nil="true"></PV1.7><PV1.8 xsi:nil="true"></PV1.8><PV1.9 xsi:nil="true"></PV1.9><PV1.10 xsi:nil="true"></PV1.10><PV1.11 xsi:nil="true"></PV1.11><PV1.12 xsi:nil="true"></PV1.12><PV1.13 xsi:nil="true"></PV1.13><PV1.14 xsi:nil="true"></PV1.14><PV1.15 xsi:nil="true"></PV1.15><PV1.16 xsi:nil="true"></PV1.16><PV1.17 xsi:nil="true"></PV1.17><PV1.18 xsi:nil="true"></PV1.18><PV1.19><CX.1>10010</CX.1></PV1.19></PV1></ADT_A01>
subscribers(1) := SYS.AQ$_AGENT('b2buser', null, null);
message_properties.RECIPIENT_LIST := subscribers;
ipmsg := b2b.IP_MESSAGE_TYPE (msg_id, null,'EAI','EchoServer','Echo_ADTA01_Process', 'ADT_A01', '2.3.1', 1, xml_clob, null);
dbms_aq.enqueue(queue_name => 'b2b.IP_OUT_QUEUE',
enqueue_options => enqueue_options,
message_properties => message_properties,
payload => ipmsg,
msgid => msg_handle);
commit;
END;
show errors;
then go to the B2B Report tab, can see two message like below
EAI EchoServer MLLP - 1.0 HL7 - 2.3.1 Echo_ADTA01_Process WaitFA 2007年11月12日 星期一 下午05:51:37
Acknowledgement Invalid 2007年11月12日 星期一 下午
and in the log file, like this:
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.mllp.MLLPExchangePlugin:decodeIncomingMessage Could not find a Trading Partner with MLLP ID = is4-nb4. Please check the Trading Partner Identification section of your Trading Partner
2007.11.12 at 17:51:43:064: Thread-10: B2B - (ERROR) Error -: AIP-52251: Error identifying remote trading partner at MLLP Exchange with MLLP ID is4-nb4
at oracle.tip.adapter.b2b.exchange.mllp.MLLPExchangePlugin.decodeIncomingMessage(MLLPExchangePlugin.java:247)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1177)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2030)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:1962)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:1920)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:463)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:335)
at java.lang.Thread.run(Thread.java:534)
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.mllp.MLLPExchangePlugin:decodeIncomingMessage identify trading partner by MLLP Id failed for is4-nb4 with ExceptionError -: AIP-52251: Error identifying remote trading partner at MLLP Exchange with MLLP ID is4-nb4
2007.11.12 at 17:51:43:064: Thread-10: B2B - (ERROR) Error -: AIP-52251: Error identifying remote trading partner at MLLP Exchange with MLLP ID is4-nb4
at oracle.tip.adapter.b2b.exchange.mllp.MLLPExchangePlugin.decodeIncomingMessage(MLLPExchangePlugin.java:257)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1177)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2030)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:1962)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:1920)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:463)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:335)
at java.lang.Thread.run(Thread.java:534)
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleExceptionBeforeIncomingTPA Enter
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Enter
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Error message is Error -: AIP-52251: Error identifying remote trading partner at MLLP Exchange with MLLP ID is4-nb4
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired Enter
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired {From=is4-nb4, FromIP=160.19.23.102, FARequired=true, protocolVersion=1.0, ToIP=160.19.55.114, Port=4911, Message-Id=1194861102002-1207274363, protocol=TCP, To=is4wingw02}
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired returning true
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Error Set
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: createAndSendFA Enter
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: createAndSendFA processed by HL7
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.hl7.HL7DocumentPlugin:createFA Enter
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.hl7.HL7DocumentPlugin:createFA Not creating an ACK for an incoming ACK Message
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: createAndSendFA B2BMessage is null
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: createAndSendFA Exit
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException FA Sent
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Enter
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Leave
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException Updating Error Message: Error -: AIP-52251: Error identifying remote trading partner at MLLP Exchange with MLLP ID is4-nb4
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Enter
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Wire message found
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState enum not null
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message error information
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message protocol message id
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message payload storage
2007.11.12 at 17:51:43:080: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Creating new business message
2007.11.12 at 17:51:43:080: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow Enter
2007.11.12 at 17:51:43:080: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow BusinessAction for the given name null null
2007.11.12 at 17:51:43:080: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating business message error information
2007.11.12 at 17:51:43:080: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Exit
2007.11.12 at 17:51:43:080: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException Updating Native Event Tbl Row
2007.11.12 at 17:51:43:080: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:updateNativeEvtTblRow Enter
2007.11.12 at 17:51:43:080: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateNativeEvtTblRow msgInfo.id = 1194861102002-1207274363
2007.11.12 at 17:51:43:096: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException notifying App
2007.11.12 at 17:51:43:096: Thread-10: B2B - (DEBUG) Engine:notifyApp Enter
2007.11.12 at 17:51:43:096: Thread-10: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>null</correlationId>
<b2bMessageId>A0133772116334587C90000068CD8000</b2bMessageId>
<errorCode>AIP-52251</errorCode>
<errorText>Error identifying remote trading partner at MLLP Exchange with MLLP ID is4-nb4</errorText>
<errorDescription>
<![CDATA[Machine Info: (is4wingw02)
Error -: AIP-52251: Error identifying remote trading partner at MLLP Exchange with MLLP ID is4-nb4 ]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
2007.11.12 at 17:51:43:096: Thread-10: B2B - (DEBUG) Engine:notifyApp Exit
2007.11.12 at 17:51:43:096: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException Updated the Error Message Successfully: Error -: AIP-52251: Error identifying remote trading partner at MLLP Exchange with MLLP ID is4-nb4
2007.11.12 at 17:51:43:096: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Exit
2007.11.12 at 17:51:43:096: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleExceptionBeforeIncomingTPA Exit
2007.11.12 at 17:51:43:096: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:incomingContinueProcess Exit
2007.11.12 at 17:51:43:096: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleMessageEvent Exit
2007.11.12 at 17:51:43:111: Thread-10: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processEvents Exit
2007.11.12 at 17:51:43:111: Thread-10: B2B - (DEBUG) DBContext commit: Enter
2007.11.12 at 17:51:43:111: Thread-10: B2B - (DEBUG) DBContext commit: Transaction.commit()
2007.11.12 at 17:51:43:111: Thread-10: B2B - (DEBUG) DBContext commit: Leave
2007.11.12 at 17:51:43:111: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:onMessage Exit
here said not find the remote partner, but in B2B server, can ping Echoserver.
what is wrong?Hello again,
I have tried all different combinations with the IP addresses and host names, but to no avail. Then I changed the Trading Partner Identification Type from MLLP Id to Sending Application (one of the customer requirements is to be able to identify the Trading Partner by the combination of Sending App/Sending Facility, since they are running multiple HL7 applications on one host). However, I still see the same error in the log file - for some reason, B2B is still trying to identify the Trading Partner by the MLLP Id. Redeploying the configuration didn't help, the requested identification type is ignored.
Please help! If needed, I can send the B2B log file, but maybe I'm missing something obvious.
BTW, the customer has installed the patch for bug 6439217 on October 10th. The B2B version is 10.1.2.2.0.
Thanks in advance! -
Unable to clear customer due to error: u201CPlease enter valid trading partner:
Hi team
i am getting this error in clearing in customer invoice
i checked out in customer master trading partner no is there :*****
and that customer is also a Vendor but in vendor master record that trading partner no is not there
but customer number is there
i need to clear against a incoming payment AB doc type with some billing document
its a bank charges i need to pay ...
i am useing transaction code f-32
if you need any inputs please do let me know
Moderator message -personal information removed
Edited by: Rob Burbank on Sep 9, 2011 9:14 AMHi,
seems like you have to reverse the document without trading partner and re-post with Trading partner. Then it should work. If this is automatic postings and more often to happen in future think about pre-setting it in GL accoutn if possible or validations/ substiutions.
Regards
Hein -
EDI 810 transaction error: Cannot uniquely identify a trading partner
Hi,
I am facing following error on B2B 11g version 11.1.1.6.0. Please provide the solution if you are aware of the issue.
Error Description: Cannot uniquely identify a trading partner. The trading partners PARTNER-A, PARTNER-B have the same set of identifications.
Partner Identification parameter for PARTNER-A and PARTNER-B
EDI Interchange ID: xxxx
EDI Interchange ID Qualifier: yyyy
EDI Group ID: 111
Name: PARTNER-A
EDI Interchange ID: xxxx
EDI Interchange ID Qualifier: yyyy
EDI Group ID: 111
Name: PARTNER-B
Thank you
RamTwo TPs can not have same identification.
There are two ways to come out of this problem.
1. Change the identification criteria for the TP.
2. Use exchange level Identification for one TP. -
B2B SelfService Error creating Trading Partner .zip import file using ant
SOA 11g 11.1.1.5 B2B - We are trying to create an import file for out trading partners into SOA B2B 11g but are getting errors when we run the ant script to build the import zip file.
We ran the ant-b2b-util to get the b2bselfservice.xsd file, loaded that into jDev to show the selfservice.xml structure.
We have built a trading partner xml file and at this point have stripped it down to one TP just to see if we could get it to work and we keep getting the same error messages.
From the $SOA_ORACLE_HOME/bin directory (where we have placed our TP xml file: TPD_NA.xml) here is the command and results from running the ant script:
[oracle@nalinoap05 bin]$ ant -f ant-b2b-util.xml b2bselfservice -Dinput=$ORACLE_HOME/bin/TPD_NA.xml -Doutput=$ORACLE_HOME/bin/TP_Docs.zip
Buildfile: ant-b2b-util.xml
b2bselfservice:
weblogic_dependencies:
[echo]
[echo] Weblogic server location: /oracle/SOAWDEV/11.1.1.5/Oracle/Middleware/wlserver_10.3
[echo] JNDI properties folder location: /oracle/SOAWDEV/11.1.1.5/Oracle/Middleware/Oracle_SOAWDEV/bin
[echo]
verifyargs:
utility:
[echo]
[echo] java.naming.provider.url=${java.naming.provider.url}
[echo] java.naming.factory.initial=${java.naming.factory.initial}
[echo] java.naming.security.principal=${java.naming.security.principal}
[echo] java.naming.security.credentials=*****
[echo]
[echo]
[echo] args=selfservice
[echo]
[java] Commandline arguments 1: [selfservice]
[java] 2012.04.10 at 13:27:35:559: main: (INFO) Input file location(s) :[oracle/SOAWDEV/11.1.1.5/Oracle/Middleware/Oracle_SOAWDEV/bin/TPD_NA.xml]
[java] 2012.04.10 at 13:27:35:559: main: (INFO) Output file location :/oracle/SOAWDEV/11.1.1.5/Oracle/Middleware/Oracle_SOAWDEV/bin/TP_Docs.zip
[java] 2012.04.10 at 13:27:35:596: main: (INFO) TradingPartner created :/soa/b2b/tp_id1AC191488133.xml
[java] 2012.04.10 at 13:27:35:600: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=4010VICS docType=852 docDef=852Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:600: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=4010 docType=997 docDef=997Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:600: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=5010 docType=850 docDef=850Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:601: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=5010 docType=860 docDef=860Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:601: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=4010VICS docType=864 docDef=864Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:601: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=5010 docType=864 docDef=864Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:601: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=5010 docType=997 docDef=997Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:602: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=5010 docType=856 docDef=856Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:602: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=5010 docType=810 docDef=810Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:691: main: (SEVERE) TPD_NA.xml: Error in Validation:
[java] [org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef',
org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef',
org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef',
org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef',
org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef',
org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef',
org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef',
org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef',
org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef']
[java] Java Result: 255
BUILD SUCCESSFUL
Total time: 1 second
Here is the contents of TPD_NA.xml:
<?xml version="1.0" encoding="UTF-8"?>
<SelfService xmlns="http://xmlns.oracle.com/integration/b2b/selfservice/profile">
<TradingPartners>
<TradingPartner hosted="false" name="OvvvvvvvX" >
<Identification name="EDI Interchange ID" value="18xxxxxxxxxX" />
<Identification name="EDI Interchange ID Qualifier" value="14" />
<Identification name="DUNS" value="18xxxxxxxxxX" />
<Identification name="Generic Identifier" value="18xxxxxxxxxX" />
<Identification name="AS2 Identifier" value="18xxxxxxxxxX" />
<SupportedDocumentDefinition initiator="true" docTypeName="852" docProtocolVersion="4010VICS" docProtocolName="EDI_X12" docDefName="852Def" />
<SupportedDocumentDefinition initiator="true" docTypeName="997" docProtocolVersion="4010" docProtocolName="EDI_X12" docDefName="997Def" />
<SupportedDocumentDefinition initiator="true" docTypeName="850" docProtocolVersion="5010" docProtocolName="EDI_X12" docDefName="850Def" />
<SupportedDocumentDefinition initiator="true" docTypeName="860" docProtocolVersion="5010" docProtocolName="EDI_X12" docDefName="860Def" />
<SupportedDocumentDefinition initiator="true" docTypeName="864" docProtocolVersion="4010VICS" docProtocolName="EDI_X12" docDefName="864Def" />
<SupportedDocumentDefinition initiator="true" docTypeName="864" docProtocolVersion="5010" docProtocolName="EDI_X12" docDefName="864Def" />
<SupportedDocumentDefinition initiator="true" docTypeName="997" docProtocolVersion="5010" docProtocolName="EDI_X12" docDefName="997Def" />
<SupportedDocumentDefinition initiator="false" docTypeName="856" docProtocolVersion="5010" docProtocolName="EDI_X12" docDefName="856Def" />
<SupportedDocumentDefinition initiator="false" docTypeName="810" docProtocolVersion="5010" docProtocolName="EDI_X12" docDefName="810Def" />
</TradingPartner>
</TradingPartners>
</SelfService>
We have exported our metadata and looked at the doc_EDI_X12.xml file and ALL of these referenced documents exist in that file and can be seen by going to Administration --> Document and under the Document Protocols navigation --> EDI_X12 --> 5010 --> 810 --> 810Def (as an example).
If we strip out all of the SupportedDocumentDefiinition lines then the ant script will build an import file with just the trading partners and Identifications.
What are we doing incorrectly or what is not working properly to get the ant script to build the import zip file??
Thanks for any assistance,
KenDoes that mean we have to create all of the document type definitions in the selfservice file?
We have created (installed) all of the document types by installing them from the B2B Administration --> Document page.
The definitions in the Trading Partner xml file exactly match the definitions of the installed documents.
In the selfservice.xsd the <element> SelfService shows the profile:DocumentProtocols as minOccurs as 0 :
<element name="SelfService">
<complexType>
<sequence>
<element minOccurs="0" maxOccurs="1"
ref="profile:DocumentProtocols" />
<element minOccurs="0" maxOccurs="1"
ref="profile:TradingPartners" />
<element minOccurs="0" maxOccurs="1"
ref="profile:Agreements" />
</sequence>
<attribute name="version" type="profile:non-empty-string"
use="optional" />
</complexType>
</element>
so we thought that since the documents had already been defined (created/installed) to B2B they would not have to be redefined in the selfservice xml.
If we have to define all of the document types in the selfservice xml file that we are using for the trading partners what are the minimum values that we need to include?
Could we use minimal definitions such as this:
<DocumentProtocols>
<DocumentProtocol name="EDI_X12">
<DocumentProtocolVersion name="4010">
<DocumentType name="850">
<DocumentDefinition name="850def" />
</DocumentType>
<DocumentType name="997">
<DocumentDefinition name="997def" />
</DocumentType>
</DocumentProtocolVersion>
</DocumentProtocol>
</DocumentProtocols>
before the <TradingPartners> section of the seflxervice xml file?
Thanks for your assistance! -
"Invalid Trading Partner Setup" Error for Invoice Inbound Propagation.
Hi,
I am trying to post xml data into the invoice interface tables through the link <http://<<server name>>:port/servlets/oracle.apps.ecx.oxta.ECXOTAInbound>.I have created an xml with repect to the transaction map. But when I post this xml i get an error in ecx error tables: ECX_INVALID_TP_SETUP. Though the trading partner setup is correct. I am unable to proceed further.
Please provide your inputs, if anyone has worked on the similar scenario.
thanks,
DanishPlease check the validation in GGB0.
The document which you are trying to post is not matching as per the validation. -
IDOC Error - Trading Partner Required
Hello Expert,
I am trying to post a document through an idoc, but getting an error "Trading Partner required".
Where i have to update these details?
Thanks,
SatyaHi Ashish,
The IDOC type is a customized one...
Then where i can check this field, can you give me some light on this?
In which segment it will be ?
Thanks,
Satya -
Trading Partner Agreement Not found error in EDI EDIFACT Scenario
Hello all,
I am getting the following error in the trace file in the EDI EDIFACT over Generic Exchange Scenario,i have verified the agreement effective to date,i also have checked the enq_orders.properties & enq_ordrsp.properties on both the servers and the FromParty Name and ToParty Name are shown correctly.so where does the actual problem occur can anyone plz help me out to solve this issue.
MsgID = C0A8010111EF3AC936E0000068CB7800
ReplyToMsgID = null
FromParty = Acme
ToParty = Acme
EventName = Exception
DoctypeName = Exception
DoctypeRevision = 1.0
MsgType = 3
payload length = 1820
*<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">*
*<correlationId>null</correlationId>*
*<b2bMessageId>C0A8010111EF3AC936E0000068CB7800</b2bMessageId>*
*<errorCode>AIP-50547</errorCode>*
*<errorText>Trading partner agreement not found for the given input values: From partyNAME "Acme", To partyNAME "Acme", Business action name "Process_ORDERS"; also verify agreement effectiveToDate</errorText>*
*<errorDescription>*
*<![CDATA[Machine Info: (mcity94)*
*Description: Unable to identify the trading partner agreement from the given input values. Also verify agreement effectiveToDate*
*StackTrace:*
*Error -: AIP-50547: Trading partner agreement not found for the given input values: From party[NAME|http://forums.oracle.com/forums/] "Acme", To partyNAME "Acme", Business action name "Process_ORDERS"; also verify agreement effectiveToDate*
** at oracle.tip.adapter.b2b.tpa.RepoDataAccessor.getAgreementNameByBaTPName(RepoDataAccessor.java:2225)**
** at oracle.tip.adapter.b2b.tpa.TPAIdentifier.identifyTPA(TPAIdentifier.java:181)**
** at oracle.tip.adapter.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:511)**
** at oracle.tip.adapter.b2b.tpa.TPAProcessor.processIncomingTPA(TPAProcessor.java:229)**
** at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1715)**
** at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2404)**
** at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2303)**
** at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2258)**
** at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:500)**
** at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:348)**
** at java.lang.Thread.run(Thread.java:534)**
*]]>*
*</errorDescription>*
*<errorSeverity>2</errorSeverity>*
*</Exception>*
Thanx
Sunny
Edited by: sunny kay on Jan 20, 2009 7:45 AMHi
Since the error states "Process_ORDERS" as the Business action I assume you are trying to enq the ORDERS document from Acme to GlobalChips. The issue then would be due to the fact that there is a trailing space character after the GlobalChips
Please check for a space (or spaces) after
to = GlobalChips
Also ensure that the UI has the trading partner with the same spelling ie. GlobalChips and not Globalchips
Thanks,
--Arun -
Authority Check business area / trading partner business area in FB50
Hi,
Through FB50, the authorization object F_BKPF_GSB controls the business area and the trading partner business area
We are looking to authorize users on all trading part business area) but only on their business area (currently handle with org levels in PFCG).
Any idea?
julienSrinivas is right. The validation only works when a CO document is being created due to a posting or allocation and not at the point of filling in master data. If you have business area active in your company code then you must include a business area. I think the best you can do in this case is to either deactivate the business area in company or create a dummy business area.
Regards,
Kenneth -
VBUND(Trading Partner) field in BSEG from Tcode FB50 through programs
Dear Friends,
I am traying to update the VBUND(Trading Partner) field in BSEG from Tcode FB50 through programs....but its not updating in BSEG.
for that we have used substitution programs,
Did we have any other way to update the VBUND in BSEG from FB50?
I have debuged the Tcode FB50, and in there its updating the BSEG from internal table t_bseg, and passing the values to t_bseg from SACCIT, but SACCIT is not having the field VBUND. thats the reasone its failed in my case.
do we have any other better solutions and idea on this???
Thanks,
SridharRefer to the following trheads:
Change field bseg-vbund
Trading Partner field (VBUND) is left blank in EC-PCA historical data load
Validation document type
Field VBUND does not allow changes to the document ?
Regards,
Fernando Evangelista -
VBUND(Trading Partner) field in BSEG from Tcode FB50
How to VBUND(Trading Partner) field in BSEG from Tcode FB50 ? ( through program way)
is it possible?
Thanks,
Sridhar>
sridher reddy wrote:
> How to VBUND(Trading Partner) field in BSEG from Tcode FB50 ? ( through program way)
> is it possible?
> -->whats ur issues ? can you put it in simple english ?
> Thanks,
> Sridhar
Maybe you are looking for
-
How to set password for dbxml in java program
When I calling XmlManager.openContainer() by a XmlContainerConfig object set to XmlContainerConfig.setEncrypted("mypass") it always says: BDB XML: Database environment not configured for encryption but I can not find the way to construct the Environm
-
Why is my macbook pro running slow since ive upgraded to yosemite?
EtreCheck version: 2.1.8 (121) Report generated March 19, 2015 at 11:45:45 PM PDT Download EtreCheck from http://etresoft.com/etrecheck Click the [Click for support] links for help with non-Apple products. Click the [Click for details] links for more
-
How to split a team project collection
Hi , we do have 100 projects in TFS , which 20 projects has never been used for long time so we would like to archive the 20 projects with new collection called Archive Collection . I had tried creating new collection with empty database and restore
-
Sony KDL52V5100 and HDMI inputs
I purchased a Sony KDL52V5100 from Best Buy in July, 2009. Nice television. I have a Dishnetwork 922 DVR/Receiver as well a Klipsch theatre system attached to the HDMI inputs. Suddenly, this weekend, the television would not pick up a signal from t
-
when trying to download apps, it's telling me to choose 3 security questions, but won't let me view the 3rd question, can anyone help plz ?