FBLPD1: Error creating BP from customer
Hi,
We are trying to migrate the master data from FI-AR to FSCM and, at a first we tried to use the transaction code MDS_LOAD_COCKPIT. But, for some reason that it was not clear the system did not creat the customer.
In that sense, we tried to create the business partner based on the customer data by using the transaction code FBLPD1 but the system gives an error message indicating that it was not possible.
By checking the transaction code MDS_PPO2 we check that the error given was:
"Address type XXDEFAULT does not exist: Address usage XXDEFAULT cannot be created"
"Application object BUPA: There is no BAPI field to screen field assignment"
"Address type XXDEFAULT does not exist: Address usage XXDEFAULT cannot be created"
Do you guys know what could be the issue ?
PS: Configuration done by using OSS Note 954816 and 956054.
Thanks in advance.
Bruno Sousa
Hi,
Thanks for your feedback.
I implemented the OSS Note 1254483 and i had also to add the XXDEFAULT entry in table TB009. After that it seemed to work.
But, i had a new error that, by checking the MDS_PPO2 transaction it stated:
"Application object BUPA: There is no BAPI field to screen field assignment"
"Enter an Industry".
In our customer we use the field "Industry Sector" and so i checked the view V_TBZ3R_BD (for BUPA object). The option "INDUSTRYSECTOR" is there so i'm guessing that in that view things are ok...
Do you know what it can be ?
Similar Messages
-
MDS_LOAD_COCKPIT Error: Create BP from Customer
I am creating BP from customer using cockpit transaction. While running PPO, I am getting the below two error for single customer.
No transfer of interval for object BU_PARTNER
Message no. NR028
Diagnosis
The last number of the internal interval should be assigned.
Number assignment usually begins in the following call at the start of the interval. However this function is blocked for some number range objects for technical system reasons.
Procedure
If possible extend the interval of the affected number range object. If this is not possible you must reorganize the relevant data and reset the interval status manually.
Business partner ##1 does not exist
Message no. R1201
Please suggest.
Thanks,
Arpit Kotharicheck the number ranges of the customer account group, and the BP role to ensure they are aligned.
-
Thread: 11gPS2 : Error creating model from wsdl while creating a WebService
Hi ,
I am trying to create a Web Service Proxy using Jdev.I am using a WSDL file located in my local system for the same. I choose all default options but the proxy is not created due to the following error -
"Error creating model from wsdl <wsdl_name> : A class/interface with the same name xyz already in use"
https://picasaweb.google.com/sudipto.desmukh/ADFIssues?authkey=Gv1sRgCJeF2bWcoM_ZBg#5610073699826050514
I found a few threads which had similar issues but the solutions didnot work for me -
1)Error creating model from wsdl (Create separate model projects for proxies , since in the existing model project I already had generated files using create WebServiceData control wizard)
2)Error when creating Web Service Proxy (there are no duplicate variables or schemas in my wsdl)
Can someone please suggest what might be wrong ?
ThanksThanks for your reply Vishal.Pasting the wsdl -
<definitions xmlns:m11="urn:iwaysoftware:ibse:jul2003:ZBAPI_SALES_DOC_FLOW:response" xmlns:tm="http://microsoft.com/wsdl/mime/textMatching/" xmlns:m1="urn:iwaysoftware:ibse:jul2003:ZBAPI_SALES_DOC_FLOW" targetNamespace="urn:schemas-iwaysoftware-com:iwse" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:tns="urn:schemas-iwaysoftware-com:iwse" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"><types><xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" targetNamespace="urn:schemas-iwaysoftware-com:iwse" elementFormDefault="qualified"><xs:element name="ibsinfo"><xs:complexType><xs:sequence><xs:element name="service" type="xs:string"/><xs:element name="method" type="xs:string"/><xs:element name="license" type="xs:string"/><xs:element name="disposition" type="xs:string" minOccurs="0"/><xs:element name="Username" type="xs:string" minOccurs="0"/><xs:element name="Password" type="xs:string" minOccurs="0"/><xs:element name="language" type="xs:string" minOccurs="0"/></xs:sequence></xs:complexType>
</xs:element><xs:element name="adapterexception"><xs:complexType><xs:sequence><xs:element name="error" type="xs:string"/></xs:sequence></xs:complexType></xs:element>
</xs:schema><xs:schema xmlns:m1="urn:iwaysoftware:ibse:jul2003:ZBAPI_SALES_DOC_FLOW" xmlns:xs="http://www.w3.org/2001/XMLSchema" targetNamespace="urn:iwaysoftware:ibse:jul2003:ZBAPI_SALES_DOC_FLOW" xmlns:rfc="urn:iwaysoftware:ibse:jul2003:ZBAPI_SALES_DOC_FLOW" elementFormDefault="qualified"><xs:element name="ZBAPI_SALES_DOC_FLOW"><xs:complexType><xs:sequence><xs:element name="ZBAPI_SALES_DOC_FLOW"><xs:complexType><xs:all><xs:element name="BELEGTYP" minOccurs="0"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="1"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="COMWA" type="rfc:VBCO6" minOccurs="0"/><xs:element name="I_BSTKD" minOccurs="0"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="35"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="I_VBELN" minOccurs="0"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="10"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="N_STUFEN" minOccurs="0"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="2"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="V_STUFEN" minOccurs="0"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="2"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="T_DOCFLOW" minOccurs="0"><xs:complexType><xs:sequence><xs:element maxOccurs="unbounded" name="item" type="rfc:ZVDOCFLOW" minOccurs="0"/></xs:sequence></xs:complexType>
</xs:element><xs:element name="T_IDOCINFO" minOccurs="0"><xs:complexType><xs:sequence><xs:element maxOccurs="unbounded" name="item" type="rfc:ZVIDOCINFO" minOccurs="0"/></xs:sequence></xs:complexType>
</xs:element><xs:element name="T_RETURN" minOccurs="0"><xs:complexType><xs:sequence><xs:element maxOccurs="unbounded" name="item" type="rfc:BAPIRET2" minOccurs="0"/></xs:sequence></xs:complexType>
</xs:element><xs:element name="VBFA" minOccurs="0"><xs:complexType><xs:sequence><xs:element maxOccurs="unbounded" name="item" type="rfc:VBFA" minOccurs="0"/></xs:sequence></xs:complexType></xs:element></xs:all></xs:complexType></xs:element></xs:sequence></xs:complexType>
</xs:element><xs:complexType name="ZVIDOCINFO"><xs:sequence><xs:element name="DOCNR"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="10"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="IDOCNR"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="16"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="CREDAT"><xs:simpleType><xs:restriction base="xs:string"><xs:pattern value="\d{4}-\d{2}-\d{2}"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="STATUS"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="2"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="DESCR"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="73"/></xs:restriction></xs:simpleType></xs:element></xs:sequence>
</xs:complexType><xs:complexType name="BAPIRET2"><xs:sequence><xs:element name="TYPE"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="1"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="ID"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="20"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="NUMBER"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="3"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="MESSAGE"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="220"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="LOG_NO"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="20"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="LOG_MSG_NO"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="6"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="MESSAGE_V1"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="50"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="MESSAGE_V2"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="50"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="MESSAGE_V3"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="50"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="MESSAGE_V4"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="50"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="PARAMETER"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="32"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="ROW" type="xs:int"/><xs:element name="FIELD"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="30"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="SYSTEM"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="10"/></xs:restriction></xs:simpleType></xs:element></xs:sequence>
</xs:complexType><xs:complexType name="ZVDOCFLOW"><xs:sequence><xs:element name="VBELN"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="10"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="POSNN"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="6"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="MATNR"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="18"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="DESCR"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="132"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="ERDAT"><xs:simpleType><xs:restriction base="xs:string"><xs:pattern value="\d{4}-\d{2}-\d{2}"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="RFMNG"><xs:simpleType><xs:restriction base="xs:decimal"><xs:totalDigits value="15"/><xs:fractionDigits value="3" fixed="true"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="MEINS"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="3"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="BEZEI"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="20"/></xs:restriction></xs:simpleType></xs:element></xs:sequence>
</xs:complexType><xs:complexType name="VBFA"><xs:sequence><xs:element name="MANDT"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="3"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="VBELV"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="10"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="POSNV"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="6"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="VBELN"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="10"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="POSNN"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="6"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="VBTYP_N"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="1"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="RFMNG"><xs:simpleType><xs:restriction base="xs:decimal"><xs:totalDigits value="15"/><xs:fractionDigits value="3" fixed="true"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="MEINS"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="3"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="RFWRT"><xs:simpleType><xs:restriction base="xs:decimal"><xs:totalDigits value="15"/><xs:fractionDigits value="2" fixed="true"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="WAERS"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="5"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="VBTYP_V"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="1"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="PLMIN"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="1"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="TAQUI"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="1"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="ERDAT"><xs:simpleType><xs:restriction base="xs:string"><xs:pattern value="\d{4}-\d{2}-\d{2}"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="ERZET"><xs:simpleType><xs:restriction base="xs:string"><xs:pattern value="\d{2}:\d{2}:\d{2}"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="MATNR"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="18"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="BWART"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="3"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="BDART"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="2"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="PLART"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="1"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="STUFE"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="2"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="LGNUM"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="3"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="AEDAT"><xs:simpleType><xs:restriction base="xs:string"><xs:pattern value="\d{4}-\d{2}-\d{2}"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="FKTYP"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="1"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="BRGEW"><xs:simpleType><xs:restriction base="xs:decimal"><xs:totalDigits value="15"/><xs:fractionDigits value="3" fixed="true"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="GEWEI"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="3"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="VOLUM"><xs:simpleType><xs:restriction base="xs:decimal"><xs:totalDigits value="15"/><xs:fractionDigits value="3" fixed="true"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="VOLEH"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="3"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="FPLNR"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="10"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="FPLTR"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="6"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="RFMNG_FLO" type="xs:double"/><xs:element name="RFMNG_FLT" type="xs:double"/><xs:element name="VRKME"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="3"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="ABGES" type="xs:double"/><xs:element name="SOBKZ"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="1"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="SONUM"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="16"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="KZBEF"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="1"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="NTGEW"><xs:simpleType><xs:restriction base="xs:decimal"><xs:totalDigits value="13"/><xs:fractionDigits value="3" fixed="true"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="LOGSYS"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="10"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="WBSTA"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="1"/></xs:restriction></xs:simpleType></xs:element></xs:sequence>
</xs:complexType><xs:complexType name="VBCO6"><xs:sequence><xs:element name="MANDT"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="3"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="VBELN"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="10"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="POSNR"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="6"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="ETENR"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="4"/></xs:restriction></xs:simpleType></xs:element></xs:sequence></xs:complexType>
</xs:schema><xs:schema xmlns:m11="urn:iwaysoftware:ibse:jul2003:ZBAPI_SALES_DOC_FLOW:response" xmlns:xs="http://www.w3.org/2001/XMLSchema" targetNamespace="urn:iwaysoftware:ibse:jul2003:ZBAPI_SALES_DOC_FLOW:response" xmlns:rfc="urn:iwaysoftware:ibse:jul2003:ZBAPI_SALES_DOC_FLOW:response" elementFormDefault="qualified"><xs:element name="ZBAPI_SALES_DOC_FLOWResponse"><xs:complexType><xs:sequence><xs:element name="ZBAPI_SALES_DOC_FLOW.Response"><xs:complexType><xs:all><xs:element name="BELEGTYP_BACK" minOccurs="0"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="1"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="T_DOCFLOW" minOccurs="0"><xs:complexType><xs:sequence><xs:element maxOccurs="unbounded" name="item" type="rfc:ZVDOCFLOW" minOccurs="0"/></xs:sequence></xs:complexType>
</xs:element><xs:element name="T_IDOCINFO" minOccurs="0"><xs:complexType><xs:sequence><xs:element maxOccurs="unbounded" name="item" type="rfc:ZVIDOCINFO" minOccurs="0"/></xs:sequence></xs:complexType>
</xs:element><xs:element name="T_RETURN" minOccurs="0"><xs:complexType><xs:sequence><xs:element maxOccurs="unbounded" name="item" type="rfc:BAPIRET2" minOccurs="0"/></xs:sequence></xs:complexType>
</xs:element><xs:element name="VBFA" minOccurs="0"><xs:complexType><xs:sequence><xs:element maxOccurs="unbounded" name="item" type="rfc:VBFA" minOccurs="0"/></xs:sequence></xs:complexType></xs:element></xs:all></xs:complexType></xs:element>
</xs:sequence><xs:attribute name="cid" use="required" type="xs:string"/></xs:complexType>
</xs:element><xs:complexType name="ZVIDOCINFO"><xs:sequence><xs:element name="DOCNR"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="10"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="IDOCNR"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="16"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="CREDAT"><xs:simpleType><xs:restriction base="xs:string"><xs:pattern value="\d{4}-\d{2}-\d{2}"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="STATUS"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="2"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="DESCR"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="73"/></xs:restriction></xs:simpleType></xs:element></xs:sequence>
</xs:complexType><xs:complexType name="BAPIRET2"><xs:sequence><xs:element name="TYPE"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="1"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="ID"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="20"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="NUMBER"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="3"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="MESSAGE"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="220"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="LOG_NO"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="20"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="LOG_MSG_NO"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="6"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="MESSAGE_V1"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="50"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="MESSAGE_V2"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="50"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="MESSAGE_V3"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="50"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="MESSAGE_V4"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="50"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="PARAMETER"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="32"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="ROW" type="xs:int"/><xs:element name="FIELD"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="30"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="SYSTEM"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="10"/></xs:restriction></xs:simpleType></xs:element></xs:sequence>
</xs:complexType><xs:complexType name="ZVDOCFLOW"><xs:sequence><xs:element name="VBELN"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="10"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="POSNN"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="6"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="MATNR"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="18"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="DESCR"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="132"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="ERDAT"><xs:simpleType><xs:restriction base="xs:string"><xs:pattern value="\d{4}-\d{2}-\d{2}"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="RFMNG"><xs:simpleType><xs:restriction base="xs:decimal"><xs:totalDigits value="15"/><xs:fractionDigits value="3" fixed="true"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="MEINS"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="3"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="BEZEI"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="20"/></xs:restriction></xs:simpleType></xs:element></xs:sequence>
</xs:complexType><xs:complexType name="VBFA"><xs:sequence><xs:element name="MANDT"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="3"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="VBELV"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="10"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="POSNV"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="6"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="VBELN"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="10"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="POSNN"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="6"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="VBTYP_N"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="1"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="RFMNG"><xs:simpleType><xs:restriction base="xs:decimal"><xs:totalDigits value="15"/><xs:fractionDigits value="3" fixed="true"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="MEINS"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="3"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="RFWRT"><xs:simpleType><xs:restriction base="xs:decimal"><xs:totalDigits value="15"/><xs:fractionDigits value="2" fixed="true"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="WAERS"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="5"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="VBTYP_V"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="1"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="PLMIN"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="1"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="TAQUI"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="1"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="ERDAT"><xs:simpleType><xs:restriction base="xs:string"><xs:pattern value="\d{4}-\d{2}-\d{2}"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="ERZET"><xs:simpleType><xs:restriction base="xs:string"><xs:pattern value="\d{2}:\d{2}:\d{2}"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="MATNR"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="18"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="BWART"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="3"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="BDART"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="2"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="PLART"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="1"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="STUFE"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="2"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="LGNUM"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="3"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="AEDAT"><xs:simpleType><xs:restriction base="xs:string"><xs:pattern value="\d{4}-\d{2}-\d{2}"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="FKTYP"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="1"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="BRGEW"><xs:simpleType><xs:restriction base="xs:decimal"><xs:totalDigits value="15"/><xs:fractionDigits value="3" fixed="true"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="GEWEI"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="3"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="VOLUM"><xs:simpleType><xs:restriction base="xs:decimal"><xs:totalDigits value="15"/><xs:fractionDigits value="3" fixed="true"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="VOLEH"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="3"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="FPLNR"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="10"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="FPLTR"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="6"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="RFMNG_FLO" type="xs:double"/><xs:element name="RFMNG_FLT" type="xs:double"/><xs:element name="VRKME"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="3"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="ABGES" type="xs:double"/><xs:element name="SOBKZ"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="1"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="SONUM"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="16"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="KZBEF"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="1"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="NTGEW"><xs:simpleType><xs:restriction base="xs:decimal"><xs:totalDigits value="13"/><xs:fractionDigits value="3" fixed="true"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="LOGSYS"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="10"/></xs:restriction></xs:simpleType>
</xs:element><xs:element name="WBSTA"><xs:simpleType><xs:restriction base="xs:string"><xs:maxLength value="1"/></xs:restriction></xs:simpleType></xs:element></xs:sequence></xs:complexType></xs:schema>
</types><message name="ZBAPI_SALES_DOC_FLOWIn"><part element="m1:ZBAPI_SALES_DOC_FLOW" name="parameters"/>
</message><message name="ZBAPI_SALES_DOC_FLOWOut"><part element="m11:ZBAPI_SALES_DOC_FLOWResponse" name="parameters"/>
</message><message name="ZBAPI_SALES_DOC_FLOWHeader"><part element="tns:ibsinfo" name="header"/>
</message><message name="AdapterException"><part element="tns:adapterexception" name="fault"/>
</message><portType name="ZBAPI_SALES_DOC_FLOWSoap"><operation name="ZBAPI_SALES_DOC_FLOW"><documentation/><input message="tns:ZBAPI_SALES_DOC_FLOWIn"/><output message="tns:ZBAPI_SALES_DOC_FLOWOut"/><fault message="tns:AdapterException" name="AdapterExceptionFault"/></operation>
</portType><binding name="ZBAPI_SALES_DOC_FLOWSoap" type="tns:ZBAPI_SALES_DOC_FLOWSoap"><soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/><operation name="ZBAPI_SALES_DOC_FLOW"><soap:operation style="document" soapAction="ZBAPI_SALES_DOC_FLOW.ZBAPI_SALES_DOC_FLOWRequest@production@@"/><input><soap:body use="literal"/><soap:header message="tns:ZBAPI_SALES_DOC_FLOWHeader" use="literal" part="header"/>
</input><output><soap:body use="literal"/>
</output><fault name="AdapterExceptionFault"><soap:fault name="AdapterExceptionFault" use="literal"/></fault></operation>
</binding><service name="ZBAPI_SALES_DOC_FLOW"><documentation/><port name="ZBAPI_SALES_DOC_FLOWSoap1" binding="tns:ZBAPI_SALES_DOC_FLOWSoap"><soap:address location="http://f4ofmsoaa01d.dev.life:8001/ibse/IBSEServlet/XDSOAPRouter"/></port></service></definitions> -
HI Gurus ,
I am using Real Estate module. In that we are creating business partner from cusomer code using FLBPD1 transaction code .
However system doesn't respond anything after running the transactions .
Can any suggest me how to create BP from customer code .
Suitable points will be awarded on answer .
Thanks & rgds
Anchal PawaeHi,
Try implementing the note 973178.
Thanks and warm regards,
Smita. -
Error creating document from using list using Document Template
Hi All,
I am trying to create a document from sharepoint list and upload it to a document library using item added and item updated event receiver methods. I can create metadata from list update in document library but unable to open the document. The error message
I get is "we're sorry. we can't open "Filename" because we found a problem with its contents. no error detail available". Please see the below code.
SPSecurity.RunWithElevatedPrivileges(delegate()
try
string TemplateUrl = string.Empty;
SPWeb web = properties.OpenWeb();
web.AllowUnsafeUpdates = true;
SPDocumentLibrary olist = web.Lists["NewLibList"] as SPDocumentLibrary;
String url = olist.RootFolder.ServerRelativeUrl.ToString();
SPFile file = null;
file = web.GetFile(olist.DocumentTemplateUrl);
if (file != null)
SPListItem oItems = properties.ListItem;
web.AllowUnsafeUpdates = true;
byte[] readStream = file.OpenBinary();
SPFile uploadedFile = olist.RootFolder.Files.Add("http://site/subsite/Libraryname/" + properties.ListItemId.ToString() + ".docx", readStream,
true);
SPListItem listitem = uploadedFile.Item;
listitem["Firstname"] = oItems["Firstname"];
listitem["Lastname"] = oItems["Lastname"];
if (uploadedFile.CheckOutType != SPFile.SPCheckOutType.None)
uploadedFile.CheckIn(string.Empty);
listitem.Update();
uploadedFile.Update();
web.AllowUnsafeUpdates = false;
catch (Exception ex)
EventLog.WriteEntry(EventLogName, ex.Message, EventLogEntryType.Error);Hi,
Please try to use the code below:
SPSecurity.RunWithElevatedPrivileges(delegate()
try
string TemplateUrl = string.Empty;
SPWeb web = properties.OpenWeb();
web.AllowUnsafeUpdates = true;
SPDocumentLibrary olist = web.Lists["NewLibList"] as SPDocumentLibrary;
String url = olist.RootFolder.ServerRelativeUrl.ToString();
SPFile file = null;
file = web.GetFile(olist.DocumentTemplateUrl);
if (file != null)
SPListItem oItems = properties.ListItem;
web.AllowUnsafeUpdates = true;
Stream readStream = file.OpenBinaryStream(); //file is SPFile type
SPFile uploadedFile = olist.RootFolder.Files.Add("http://site/subsite/Libraryname/" + properties.ListItemId.ToString() + ".docx", readStream, true);
uploadedFile.CheckOut();
SPListItem listitem = uploadedFile.Item;
listitem["Firstname"] = oItems["Firstname"];
listitem["Lastname"] = oItems["Lastname"];
listitem.Update();
uploadedFile.Update();
uploadedFile.CheckIn(string.Empty);
web.AllowUnsafeUpdates = false;
catch (Exception ex)
EventLog.WriteEntry(EventLogName, ex.Message, EventLogEntryType.Error);
If the issue still exists, I suggest you dubug your code and check whether line of code error.
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support -
Error Dummy items from Customizing have to be excluded @ Liquidity Planner
Dear Experts,
I want to try Liquidity Planner Calculation, using FLQAD,
when in selection screen i aready insert :
- Paying Company Code
- 1st Derivation Step : Query Sequence
- 1st Derivation Step : Exit Module
- 2st Derivation Step : Buffer Item
- 2st Derivation Step : Exit Module
- Test Run
- Detail List
so when Execute / F8, i get error message "Dummy items from Customizing have to be excluded"
please help me.
thx you.You get this error if the liquidity items in FLQC2/FLQC13 and buffer item field of flqad selection screen are same.
Buffer item refers to liquidity items assigned to vendor/customer recon accounts.
To avoid this error donot use liquidity items from FLQC2/FLQC13 in FLQAD buffer item. -
ORA-01152 error while creating db from custom template
I have a database based on the "general purpose/transaction processing" db, but with a custom tablespace/data added. I have attempted to clone this database by using dbca to create a custom template (including data) from this database. The template creation appears to be successful -- however, when I use dbca to try to create a new db from this custom template, I get the following error when dbca attempts to initialize the instance:
ORA-01152: file 5 was not restored from a sufficiently old backup
ORA-01110: data file 5: <path to my custom tablespace .dbf>
If I select "ignore" at this point, I get further errors, the next error is
ORA-06550: line 1, column 7: PLS-00201: Identifier 'DBMS_SERVICE.DELETE_SERVICE' must be declared
I'm using 11gR2, and am relatively inexperienced on the dba side, any help appreciated.
Thanks,
BenUpdate: I had unintentionally left my custom tablespace in READONLY state after an earlier experiment with transportable tablespaces. After putting the tablespace back into READ WRITE mode and creating a new template, I was successfully able to create a new db from the template.
I'm still a little curious why this procedure wouldn't work properly with a READONLY tablespace, however.
Ben -
Error creating Universe from BW query
Hi
Creating the Universe connected to BW query (BI 7).
Connection is proper and universe designer is connected to BW system without any problem. I have already used many queries to connect to universe and webi documents has been developed.
The only difference in this BW query is, it is using hierarchy with 'derivation type' in 'select hierarchy date'.
BW query is working as expected in BEx designer.
This is the error message when trying to create the universe from BW query -
Error getting dimensions for cube <infoprovider name>/<query name>(catalog <infoprovider name>): Unknown error when executing MDX
Product name : SAP BusinessObjects Enterprise XI 3.1 Client Tools SP3
Please respond how this can be resolved.
Thanks
SreedhSreedh,
I was wondering whether you could resolve this error?
Would appreciate if you can convey the resolution.
I am getting the same error - ( BOE XI 3.1 ).
Thank you,
PK -
Error creating subsite from template - SharePoint 2010
I appreciate the help from anyone who can help in my situation.
I am trying to create a subsite whose parent is a SharePoint Server 2010 website. When I'm doing that, I go to:
Site Actions > Create > Sites and Workspaces
My purpose is to create a subsite using the "Web Databases > Issues Web Database" template. When I do that, the page tries to create a website for a long time, and when it finishes, the following error message page appears:
Preparing Site ...
Someone has recently made changes to this site and the site is being updated. If the site remains offline for an extended period of time, contact a site owner. Wait
a moment and refresh your browser
However, when I use another template, say "Collaboration > Team Site", such website is created successfully and is fully functional.
Can anybody help me with this issue? My vast expertise in SharePoint extends to one week. I have no idea how to figure this out.
Thank you so much for everything! Have a great year.you have to create access service application. See below
You have to make sure you did the following:
Created a Access Service Application
(Central Administration – Manage Service Applications – New – Access Services)
Started the Access Database Service
(Central Administration – Manage Services on Server)
then open up the SharePoint 2010 Management Shell, and give the following powershell command: enable-spSessionStateService –DataBaseName <SomeNewDatabaseName>
above command will create a session state database and turns on the session state service.
Refresh your browser and you are all set to go
http://neelb.wordpress.com/2011/05/12/108/
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
Error creating webservice from BRF+ application
Hi,
I am creating a webservice for the BRF+ application that I created.
I entered following parameters,
Development Package:
Local Package:
Transport Request:
Create Function Group:
Function Group:
Function Module:
Prefix for Generated Object:
Webservice Name:
Webservice Short Text:
Webservice Security Profile:
I get the following error message, which I am unable to find the reason for. Please help.
Save all the objects before generating the webservice
Alternatively I will appreciate if I can have the code that is generated as part of webservice. I think there is more code than I found below from the blogs.
TRY.
hand over some values into the context
lo_context = lo_function->get_process_context( ).
lo_context->set_value( iv_name = 'GROSS_SALARY' "#EC NOTEXT
ia_value = 25000 ).
process the function
lo_function->process( EXPORTING io_context = lo_context
IMPORTING eo_result = lo_result ).
get the result
lo_result->get_value( IMPORTING ea_value = lv_string ).
WRITE lv_string .
CATCH cx_fdt INTO lx_fdt.
error handling
LOOP AT lx_fdt->mt_message ASSIGNING <ls_message>.
WRITE / <ls_message>-text.
ENDLOOP.
ENDTRY.
lo_function->if_fdt_transaction~dequeue( iv_deep = abap_true ).
My goal is to create a function module that can use the BRF+ application rules to determine result based on input entered.
Regards,
Kartik N.Hi Kartik,
You will get the following error message, if you have done some changes and you have not saved before trying to generate the webservice.
Please save all the changes before trying to generate the webservice.
Also, if your goal is to just generate the function module, this can also be alternatively done, but not from the UI.
You can try the same by executing the method GENERATE_RFC of the class CL_FDT_WEB_SERVICE and pass the required inputs. The only differnece between both this method is that in the webservice method you also have to provide the webservice related attributes, whereas in the other method you do not have. This funcitonality has not yet been ex[posed on the UI.
Thanks and Regards
Nitesh -
LMS 4.2 Create Portlet from Custom Poller
Hi folks,
I create a custom poller, and would like to add it as a portlet. I see that histo and live-graph it allow you to configure custom values, but they don't seem to accomplish what I need. I'd just like a portlet showing the specific output from the poller I created, not one where I have to select a specific device, a specific MIB, etc (already did that with the poller).
Any ideas? The poller has a specific handful of devices defined already; it seems redundant to then have to definte them all again within Live Graph It.
Thanks for any info!
JenHi,
this might be able to help you.
http://www.cisco.com/c/en/us/td/docs/net_mgmt/ciscoworks_lan_management_solution/4-1/user/guide/monitoring_troubleshooting/mnt_ug/mnt-monitor-dashboard.html#wp1548478
Custom TOP-N
Live - Graph It
BR -
Hello,
I need some help:
When I try to create a purchase order from a quotation work item (QUOT),it displays some error messages. but this hasn't always happended, in
other case it displays a successfully message and it doesn't display anyerror messages.
Bad Case:
When I run the transaction BBP Bid Invitation Cockpit (web SRM), I writea BID number and push button Start, then I select a bid accepted. At last
I push button "Generate Purshase Order" and it displays a error message.
Good Case:
Idem but with other BID and it displays a successfutlly message.
Debugging this transaction from SRM using external breakpoint in some
includes, functions and forms, I can view that the some parameters and
some tables haven't filled in the same way. (i.e. at the bad case there
are some tables and some parameters empty and in the good case those
tables and parameters are fully).
Can you, please, help me to identifiy what could be wrong?.
Thank you very much,
Best Regards.Hola Victoria,
I can help you with some of your problems:
1) Vendor xxxxxx not intended for purch. org.
To fix this, access BBPMAININT transaction (Manage Business Partner) and edit Business Partner Data. Go to tab "Vendor data" and insert a new line for the Purchasing Organization: insert a Purch. Org. that is the same as the one that you are trying to create the PO with.
2) No logical system for RI is maintained. Inform system admin.
What would RI be?
3) Enter the comapny code.
Check Vendor data as previously suggested by Kathirvel.
4) Incorrect interface data for set PDORG in method C.
No idea.
5) Output: No details for medium PRN in vendor master record.
Right now the output default value is PRINTER. Here you have to options: you can either define a different standard output for the vendor, which can be mail, fax, etc. OR you can access PPOMA_BBP and insert a valid printer in the attributes tab for parameter "Default Printer". Do that in the company level, for example.
5) Delivery date more than a year in the future
This is probably a warning because the purchase requisition items had a delivery date way to far ahead. -
Barcode - Error creating pdf from Word doc containing Barcode 3 of 9 (any barcode font)
I have been trying to creat a pdf from a word document that contains a barcode 3 of 9. Everytime I attempt to create the pdf I get an error "Adobe Distiller has stopped working"
I have ...
OS: Windows 7 Enterprise
Acrobat X
The Microsoft error info is
Problem signature:
Problem Event Name: APPCRASH
Application Name: AcroDist.exe
Application Version: 10.1.3.23
Application Timestamp: 4f7bb7c6
Fault Module Name: MSVCR90.dll
Fault Module Version: 9.0.30729.6161
Fault Module Timestamp: 4dace5b9
Exception Code: c0000005
Exception Offset: 0003b36a
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
I would appreciate any assistance and / or suggestions.
Thank you.The PDF was not created. I actually did try creating a PDF of just the first 5 pages of the document which included no graphics at all, just straight text, and I got the same exact error with no PDF created. I've also tried removing the headers and footers and choosing another section of the document and still I get the exact same error with no PDF.
If I create an entirely new document and type a bunch of text and try saving that as a PDF, it saves without a problem. But retyping my 200 paged document is not exactly an option. Merely removing a portion of the document, resaving it, and trying to create a PDF out of it doesn't seem to work either. I feel like it would be a whole lot of work involving a whole lot of time I currently don't have to track down the issue within the document. I would be happy if the software would simply replace the font, at least then I'd have an idea of where the problem lies. I believe there is also a setting to tell the program to warn of problems but create the PDF anyway. I marked that as well and it still failed to create a PDF. So far I can't seem to get any other error other than what I posted above no matter what I try.
My apologies if I sound frustrated, the truth is I am. I thought this would be a simple process to convert the word document into a PDF. Who knew it would be the hardest part??
Could you let me know what a binary search is? I'm not familiar with how to do this.
thank you! -
How to display exception on error page raised from custom login module?
Hi All,
I've created my own login module and I am using form authentication mechanism.
Here is how my login and error pages defined in web.xml:
<login-config>
<auth-method>FORM</auth-method>
<form-login-config>
<form-login-page>/logon.jsp</form-login-page>
<form-error-page>/error.jsp</form-error-page>
</form-login-config>
</login-config>
But when my login module throws an exception (LoginException) the following code in <i>error.jsp</i> returns null:
<%=request.getAttribute("javax.servlet.error.message")%>
though this code works good on Weblogic.
Declaring the <i>error.jsp</i> also in the <error-page> tag didn't help.
So what did I miss to configure?
Or maybe NetWeaver doesn't allow to get the exception from the <form-error-page> at all?If I understand your question correctly, you can use the CQ.Notification JavaScript object for this. See documentation here: http://dev.day.com/docs/en/cq/current/widgets-api/index.html?class=CQ.Notification
-
Creating Frames from Custom Pattern
I am following instructions found in Issue 24 of Photoshop Creative which describe how to create a custom frame for a photo using a pattern you define. In the article they're using the fur of a leopard.
The instructions state as follows:
1) Select what you want as a pattern.
2) Copy and paste it into a new document.
3) Go to Filter...Pattern Maker.
4) Click the Use Image Size checkbox.
5) Click the Use Clipboard as Sample checkbox.
6) Click Generate until you see a pattern you like.
7) Click Save.
Now the next steps I assume take place in the photo where you want the frame. It doesn't say this specifically but the screenshots indicate so.
1) Duplicate background layer.
2) Hide the bottom background.
3) Select All.
4) Select..Modify...Contract
Here is where my problem is. At this point Contract is grayed out. I have tried changing the Image Mode to 8-bit but that doesn't help. What is required to have "Contract" available?
For the sake of anyone interested, the rest of the instructions are:
5) Invert the selection.
6) Press Delete.
7) Create a new layer.
8) Edit...Fill.
9) Select the pattern.
Adding styles. It then goes one to add a bevel and emboss layer.I am following instructions found in Issue 24 of Photoshop Creative which describe how to create a custom frame for a photo using a pattern you define. In the article they're using the fur of a leopard.
The instructions state as follows:
1) Select what you want as a pattern.
2) Copy and paste it into a new document.
3) Go to Filter...Pattern Maker.
4) Click the Use Image Size checkbox.
5) Click the Use Clipboard as Sample checkbox.
6) Click Generate until you see a pattern you like.
7) Click Save.
Now the next steps I assume take place in the photo where you want the frame. It doesn't say this specifically but the screenshots indicate so.
1) Duplicate background layer.
2) Hide the bottom background.
3) Select All.
4) Select..Modify...Contract
Here is where my problem is. At this point Contract is grayed out. I have tried changing the Image Mode to 8-bit but that doesn't help. What is required to have "Contract" available?
For the sake of anyone interested, the rest of the instructions are:
5) Invert the selection.
6) Press Delete.
7) Create a new layer.
8) Edit...Fill.
9) Select the pattern.
Adding styles. It then goes one to add a bevel and emboss layer.
Maybe you are looking for
-
HI, I am using V11.1.2.2 Hyperion Planning. I am currently getting an error: Error : Period dimension 'Period' is missing a Base Time Period member 'Jun' that has been deleted since the last deployment. Base Time Period members cannot be deleted once
-
Hi, I am using Oracle Database with Access frontend. So I want to refresh materlized view through Access not Oracle. (Note: I know how to refresh materlizes view through oracle) Yours,
-
AIR for Android Captive Runtime
Is it possible to package android apps with AIR (or will it be) using Flash CS5.5? I don't see anything on the web about. Just how to do it with Flex and ADT etc...
-
Dear All, Is there any standard way by which we can pull the highest info record price for a particular material during easy cost planning (CJ40) ? Regards, Sagnik
-
Flagged Emails in iCloud?
How can I get a mailbox in iCloud with my emails flagged in mail on the desktop?