FBML Fails to work.

Recently I created a project for a customer that created a small flash site which we stored on the server as their main site. The purpose of this site was to use flash and xml for a small website we could embed into a facebook fanpage on FBML.
Our FBML code is as follows:
It grabs the .jpg file (which appears correctly) and loads the http://i-gard.com/fb/index.swf (which appears correctly on via that url) however when trying to load the index.swf in the FBML facebook page found here: http://www.facebook.com/pages/I-Gard-Corporation/123763867649085?v=app_4949752878 all the pictures fail to load for no reason even though they worked fine on the main domain and all have an absolute path so should be working fine.
Anyone have any ideas on what my problem might be; and how to correct it?
Regards,
Adam

<fb:fbjs-bridge/>
<fb:swf
    swfbgcolor="000000"
    imgstyle="border-width:3px; border-color:white;"
    swfsrc='http://i-gard.com/fb/index.swf?domain=http://i-gard.com/fb/'
    imgsrc='http://i-gard.com/fb/520x700.jpg'
    width='520' height='700' />
(Adding facebook code as it didnt appear in the first post)

Similar Messages

Safari and app store fail to work after installing Maverick, what can I do?

Safari and app store fail to work after installing Maverick, what can I do?

Disk Utility (Applications - Utilities - Disk Utility) Repair Disk Permissions 2x. Then restart in Safe Mode and try both apps. Restart normally and post results.

IChat video/audio fails to work

iChat video/audio fails to work 90% of the time. The error message says the other party failed to respond, or some other, similar, bogus "communication error" message.
Invitation to video or audio chat fails 100% of the time with certain buddies of mine, and anywhere from 50% to 90% of the time with others, regardless of whether they invite me or I invite them. Changing ISPs, Macs, locations, or static/dynamic IP settings has made no difference.
This problem surfaced with Tiger in the summer of 2007, and progressively became worse, especially since Leopard, to the point where iChat video/audio fails 100% of the time, unless the other user happens to be in the same [home] network.
All of a sudden the problem went away since the upgrade to 10.5.6, and I was able to again use iChat video to communicate with friends I have not been able to "see" in a year and a half! However, the problem started again today, with the same bogus "communication error" message every time a video connection attempt is made.
Screen Sharing also fails to work, 100% of the time, regardless of how it is invoked, through iChat or not, unless, again, it is attempted between 2 macs in the same home network.
In the meantime, Skype video works fine all the time.

Hi,
Thomson-Alcatel by default do what is called Binding of SIP to port 5060
This means ANY SIP data is forced to that port. iChat 4 no longer uses this port for SIP. It caused problems in iChat 2 and 3 which could be resolved when the firmware was Version 4 or earlier.
How do I know ?
Personal Experience from a Speedtouch 510v4 (running version 4.2.5 firmware)
Hence the web page I linked you to.
Built up from comments on the iChat 3 forum and the iChat 2 forum since 2004
Search Results for iChat 3 (it will only go back to about Nov 14th 2005 when the software Apple Uses to run the forums changed - some active threads did cross over this date so occasional ones are older)
Smaller results from iChat 2
The work by iBoise in this forum and the ADSLGuide's Apple Forum
Known issues for the BT HOME HUB in Britain as it is a Thomson-Alcatel inside.
Because the fix on Page 4a in the orignal link I gave, worked until Version 5 firmware came out.
As I clearly said the results can be intermittent.
With non Speedtouches it tends to be a 10:10:30 split out of 50 Buddies
10 you can get all the time.
10 now and then Buddies and
30 Never successful.
The Original Version 4 Telnet command would make this 100% successful to non Speedtouch devices
In Version 5 it becomes about 15:10:25 which only marginally better.
Later versions of the firmware do not even seem to reach these figures.
Speedtouch to Speedtouch connections are better but still not 100%
I would guess you live some where where Speedtouch's are popular and have many Speedtouch to Speedtouch connections that fair slightly better than average.
Last time I had contact with iBoise on this the Firmware was at version 7 and he was in the process of evaluating it for any changes.
There has been no announcement. In this case I don't think No News is Good News.
I hope this helps.
10:42 PM Wednesday; January 21, 2009

SLM 2008 fails to work

I have 2 SLM 2008. One of the bought in 2008 still under Linksys while the second is already Cisco labeled I got in 2010 to extend my home network. Both are firmwared to 2.0.0.10.
The first one yesterday failed to work. When I switch it off nad in a minute back on, in a few seconds all leds light and after a couple of seconds go off. And that's it no farther signs of life. It is not pinged nor webgui accessible. Reset did not solve the problem. Any idea?

Hi,
The Screen Sharing part of iChat uses a Random port over the internet (Along side an Audio Chat).
It may depend on how you have ports opened or allowed in any routing device.
11:20 PM Saturday; July 18, 2009

Fax printer fails to work

Hi folks,
The Fax_Printer fails to work after running "pacman -Syu".
On;
File --> Print --> Fax_Printer --> Print
No response. The dialer does not popup for typing phone number
On browser
localhost:631/printers
Fax_Printer
Warning:
"recoverable: Network host 'locahost' is busy; wiill retry in 25 seconds...."
However no further response popup.
$ cat /etc/cups/cupsd.conf
DefaultEncryption IfRequested
LogLevel info
SystemGroup sys root
# Only listen for connections from the local machine.
Listen localhost:631
# Show shared printers on the local network.
Browsing On
BrowseOrder allow,deny
BrowseAllow all
DefaultAuthType Basic
<Location />
Allow localhost
# Restrict access to the server...
Order allow,deny
</Location>
<Location /admin>
Allow localhost
# Restrict access to the admin pages...
Order allow,deny
</Location>
<Location /admin/conf>
AuthType Basic
Require user @SYSTEM
Allow localhost
# Restrict access to the configuration files...
Order allow,deny
</Location>
<Policy default>
<Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscriptio
Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume
Job CUPS-Move-Job>
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
<Limit Pause-Printer Resume-Printer Set-Printer-Attributes Enable-Printer Disable-Printer Pause-Printer-After-Curre
t-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startu
-Printer Promote-Job Schedule-Job-After CUPS-Add-Printer CUPS-Delete-Printer CUPS-Add-Class CUPS-Delete-Class CUPS-Ac
ept-Jobs CUPS-Reject-Jobs CUPS-Set-Default>
AuthType Basic
Require user @SYSTEM
Order deny,allow
</Limit>
<Limit CUPS-Authenticate-Job>
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
<Limit All>
Order deny,allow
</Limit>
</Policy>
$ cat /etc/hosts
# /etc/hosts: static lookup table for host names
#<ip-address> <hostname.domain.org> <hostname>
127.0.0.1 localhost.localdomain localhost arch.satimis.com
192.168.0.52 arch.satimis.com
# End of file
The modem is on.
$ sudo /etc/rc.d/cups restart
:: Stopping CUPS Daemon [DONE]
:: Starting CUPS Daemon [DONE]
Please advise where I have to check? TIA
However both HP_Printer and PDF_Printer are working w/o problem.
Edit:
Performed further test as follows;
$ lsmod|grep lp
lp 11972 0
parport 38156 3 parport_pc,ppdev,lp
$ dmesg|grep lp
On node 0 totalpages: 261983
Calibrating delay using timer specific routine.. 3620.49 BogoMIPS (lpj=6031192)
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
lp: driver loaded but no devices found
lp0: using parport0 (interrupt-driven).
lp: driver loaded but no devices found
$ ls -l /dev/lp0
crw-rw---- 1 root lp 6, 0 2008-04-16 21:43 /dev/lp0
$ sudo pacman -Syu
Password:
:: Synchronizing package databases...
core 24.5K 33.5K/s 00:00:01 [#####################] 100%
extra is up to date
community 331.3K 198.1K/s 00:00:02 [#####################] 100%
archlinuxfr is up to date
:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...
Targets: rsync-3.0.2-1 abs-2.0-3
Total Download Size: 0.27 MB
Proceed with installation? [Y/n] Y
:: Retrieving packages from core...
abs-2.0-3-x86_64 7.4K 27.8K/s 00:00:00 [#####################] 100%
:: Retrieving packages from extra...
rsync-3.0.2-1-x86_64 266.2K 120.3K/s 00:00:02 [#####################] 100%
checking package integrity...
(2/2) checking for file conflicts [#####################] 100%
(1/2) installing rsync [#####################] 100%
==> ABS now uses rsync, instead of cvsup, to synchronize your tree.
==> Please note the new configuration in /etc/abs.conf
warning: /etc/abs/supfile.unstable saved as /etc/abs/supfile.unstable.pacsave
warning: /etc/abs/supfile.testing saved as /etc/abs/supfile.testing.pacsave
warning: /etc/abs/supfile.extra saved as /etc/abs/supfile.extra.pacsave
warning: /etc/abs/supfile.core saved as /etc/abs/supfile.core.pacsave
warning: /etc/abs/supfile.community saved as /etc/abs/supfile.community.pacsave
warning: /etc/abs/abs.conf saved as /etc/abs/abs.conf.pacsave
(2/2) upgrading abs [#####################] 100%
Reboot Archlinux. No warning in connection with udev was found on text scrolling. Problem remains
I found "FS#9867 - /dev/lp0 not created by udev"
http://bugs.archlinux.org/task/9867
The case is similar to mine. Problem happens after running update/upgrade. Previously the Fax_Printer worked w/o problem.
Remark: I have WindowsXP running on this box (on another HD). Sending and receiving faxes are w/o problem.
I think I have to downgrade "udev" if w/o a solution. Please advise how to do it? TIA
B.R.
satimis
Last edited by satimis (2008-04-16 14:58:13)

Please provide the following relevant information so someone can help including:
Printer Model -
Detailed Problem Description -
Operating System of computer (including service pack revision) - Done
Connection Method - USB, Hardwired LAN, Wireless? -
Make and model of router and modem? -
Error messages - on printer screen and/or computer, any blinking light patterns?
If wireless, when the problem occurs, what is status of Blue Wireless light on printer, on, off or blinking? -
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

HSRP fails to work due to h/w failure

We have a situation that HSRP fails to work due to a partial h/w failure on the active router.
What happened is the active router continously getting input error on its Ethernet interface. User traffic fails to be received by this router. However the router is still able to send hello message to its standby router .When we do a sh standby on the active router, it says unknown standby which concluded that it does not receive hello message from the standby. The fault happened everyday . we can clear the problem by rebotting the router but fault came back the next day again for several times. Once we replaced the active router , problem did not return.
In understand HSRP uses mulitcast protocol . but I would like clarification that HSRP is using unidirectional comunication with the standby group. In a situation like this ,my assumption is the TX circuit on the LAN is working but teh RX circuit failed. The standby router would never know the LAN interface of actice router fails to receive its hello messages. Therefore the fail over never trigger.
Appreciate your feedback on this.
Regards
Edmond

I believe HSRP use multicast address for the hello but it still use broadcast to ensure the standby router is active. I can't find such info. to prove it. Please correct me if I am wrong.
For the LAN connection, if the RX is failed, the interface should not up, or say, e.g. if the RX-pair of cable is not connectioned, the interface should down. So, I believe there is something wrong in the LAN interface, it may not only the RX side error.
Just my 2 cents.

Occasional MacBook Pro 8,1 / Feb 2011 trackpad button fails to work

Having this really annoying problem on occasion with a new 13" MBP (purchased a month ago in Toronto from the Apple Store Eaton) - every once in a while the trackpad button will fail to work. The trackpad will function just fine, but the button will not work no matter what you do. I also have a Magic Mouse; if the trackpad button won't work, neither will the MM.
It's a new MBP 8,1 running Lion, with 8gb RAM (1333mhz DDR3, 4gb per stick) and a new 1Tb drive. I will point out that this error preceded the RAM and HDD upgrade by some time, which suggests it's not due to the new components.
Being new, it doesn't run hot, nor is it due to a swollen battery. I spoke with a friend who suggested a PRAM reset. That didn't work; the behaviour started up again within 1 hour of resetting this.
I've noticed that it only seems to arise with Internet connectivity issues - if I turn WiFi off (on purpose as I want to save battery) and I leave a browser window open, chances are high that I won't even be able to log in using the trackpad button. In these cases I can usually use the keyboard with an Alt-Tab to switch out of hung applications, but it doesn't always work. If Safari is left open (say at a coffee shop) and I take the MBP home, and reconnect, it will frequently show this non-working button behaviour too.
Other 'remedies' or workarounds include re-enabling Wifi off and on again, but that doesn't always work; flipping the lid down, then reopening for another attempt at login doesn't always work either.
I took it back to the store 2 weeks ago, but they kept thinking it would be a hardware issue and wanted to replace the trackpad - without guaranteeing that this would solve the problem. And the fact that it does work again after a log off suggests to me it's not hardware, it's software.
Tonight after the coffee shop at lunch, the MBP button would not work after I returned home. Rebooting twice did not help.
Any ideas, anyone?
Cheers
Massimo Savino

Delete CleanMyMac2. You do not need it and may be a contributing reason for your problem.
Check Activity Monitor for applications that may be using a lot of CPU resources:
http://support.apple.com/en-us/HT203184
Run an Apple Hardware Test:
http://support.apple.com/en-us/HT201257
Note that an error free AHT is not definitive.
You also might test the MBP with the original RAM module in place of the 8GB module you installed. There may be compatibility issues.
Ciao.

Hi I installed a new hard drive in my Mac mini osx lion an when I turn it on I get a flashing file with a question mark. I tried holding command and R keys when turning it on but the recovery fails to work. Does any one know how I can get it to recover?

Hi I installed a new hard drive in my Mac mini osx lion an when I turn it on I get a flashing file with a question mark. I tried holding command and R keys when turning it on but the recovery fails to work. I can hold the option key at start up and choose my network, then Internet recovery shows up with an arrow pointing up. When I click on the arrow Internet recovery fails and all I get is a globe with a triangle on it with an exclamation mark on it, and under that it says
apple.com/support
-6002F
Does any one know how I can fix this without a recovery disc? Thanks

I just want to add to this, in case someone else searches for this error on Apple Support (google doesnt cover apple support.. how clever is that?)
I had the same error. And i had a Computer that had worked, with a SSD drive and 16GB upgrade done by the owner himself.
I tried swapping with a Mechinal Harddrive, no luck.
Kept the Mechanical drive in, and tried with some other Ram, it worked..
So for me this error and after reading the other responses can be boiled down to a Harddrive problem or Ram issue.
It was Ram for me..

Cover Flow preview in Finder fails to work

Hello,
I updated recently to OS X Mavericks, and since i updated there have been problems in the Preview (Cover Flow preview in Finder.
When i open a folder and scroll down items, sometime there are 10 images and in cover flow shows only half and the other half are like not previewing them as they don’t exist in the folder so when i click on list view then gives me just file names i can see full list and open all files big, but the Cover flow is failing to work and desplay preview images - not previewing the correct fles mix, image names, for example i click on file 1 and it shows file 2… when i delate an image from the folder it just keeps a ghost image there so you don’t know if its actually erased, but again when u open in list view mode its ok, or you constantly have to close and reopen the folder to refresh the view in cover flow, so 100% Cover Flow fails to work since the update.
can you tell me what is wrong?how can i fix it please as i really need this feature?
Thank you

Does QuickLook work?
Select the File and tap the space bar?
Regards
TD

Since installing OS X Yosemite my Acrobat 8 fails to work

Since installing OS X Yosemite my Acrobat 8 Professional fails to work. I get a dialogue pop up saying:
Then closes the application preventing myself creating multiple page PDFs
Can anyone help resolve this issue?

Acrobat 8 is not compatible with Yosemite. You need to switch to Acrobat XI
(you can't upgrade because Acrobat 8 is also too old to qualify for an
upgrade).
On Fri, Jan 23, 2015 at 10:07 AM, olidillon <[email protected]>

Microsoft Office 2011 fails to work on new iMac

I received my new iMac in mid December, and I used the Migration Assistant to move everything. Unsurprisingly, MS Office failed to work. I paid MS another $12 so I could download a new copy of MS Office 2011 and tried installing it. Installation succeeded, but every time I opened a Word or Excel file, it crashed.
I deleted Office from both iMacs, old and new, including all of the MS files hidden everywhere. Reinstalled but the same thing happens. Deleted everything, including the downloaded disk image, downloaded it again, and reinstalled.
Same result--crash!
I have no idea what to try next. My wife is beginning to doubt my technical expertise. I've tried to mollify her with OpenOffice and Pages, but she is getting frustrated and angry.
Any ideas on what to try? Please save my marriage!

Your original post states:
I deleted Office from both iMacs, old and new, including all of the MS files hidden everywhere.
I have no idea what files you have deleted, and what files have been left behind, you have no guarantee that you deleted every single file from the thousands of files Office installs, a single preference file left on your machine is enough to cause Office to fail.
As you made a serious error in using Migration to use Office on a new machine, I did not take as absolute certainty you made a proper and complete uninstall of Office.
If you need Office to work quickly, your option now is to clean install your Mac;
back up your work files
erase the hard drivereinstall the operating system
install Office correctly
You will be up and running in 2 hours.

Power button fails to work about 95% of the time

Hello,
I have a Toshiba P205-S6267 that is having a strange issue.
About 95% of the time the power button fails to work when on battery, and it fails 100% of the time when the AC adapter is plugged in.
I am getting pretty stumped on this one and starting to think I may need to replace the 7-button circuit under the power button. Before I spend the $55 to do that, I wanted to see if anyone had any advice for me.
Here are the things I have tried.
- the standard unplug the power / battery and wait a few minutes then plug it back in.
- tried this only on battery, same issue
- tried only on AC, won't power up at all
- checked AC adapter with multimeter and it was outputting the correct voltage (also it keeps the battery charged still)
- removed the keyboard and speaker cover then reseated the 7-button circuit
- cleaned the ribbon cable contacts and reseated the ribbon cable for the circuit
- removed RAM and tried each stick by itself, no change.
I'm kind of lost here. Again, I am probably at a point where I need to replace hardware but I don't want to drop the cash without some kind of verification that I'm not retarded.
Any assistance or advice is welcome. Thank you.

Ah, I've been playing around with this and it seems I was mistaken about the nature of the problem.
It is deterministic, for one. It seemed nondeterministic because the action that makes the glasspane paint() fail is the act of giving focus to the JInternalFrame that the glasspane belongs to.
Why does giving focus to a JInternalFrame disable that frame's GlassPane? I can take focus away from it, and the repaint() method starts working again.

Links to posts fail to work after I sign in

Before I sign in links to posts take me to the correct post but they fail to work after I sign in except for the special case of all posts on one page.
Does this happen for everybody or only those who had particular viewing preferences set up before the change to the latest forum software?

1. See my User Tip for some help: Some Solutions for Resetting
    Forgotten Security Questions: Apple Support Communities.
2. Here are two different but direct methods:
    a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
    b. Call Apple Support in your country: Customer Service: Contacting Apple for
        support and service.
3. For other queries about Apple ID see Frequently asked questions about Apple ID.
4. Rescue email address and how to reset Apple ID security questions
5. For online assistance use Apple - Support - Express Lane

Java application built using cr4e(clipse) fails to work in some Windows OSs

I created a variation of the SampleViewerFrameClient, leveraging the opportunity to automatically refresh (refreshReport()) a Crystal report. This worked in Windows 2007, but fails to work in Windows 2008 and 2003 (in a couple of ways).
One theWindows 8 system with Crystal Reports installed, the viewer frame deploys displaying the report selection window, but after selecting and opening a Crystal report, it presents the following error window:
Problem Showing Report
Error Code: -2147467259
This Windows 8 system happens to have both Crystal Reports 2013 and Crystal Reports for Enterprise 4 installed. Java version JDK 7u55.
On the Windows 2003 system, without any Crystal Reports installation, running Java JRE 1.6, it fails with an exception:
unsupported class version error (major.minor 51.0): SampleViewerFrameClient.
It runs fine from eclipse on the Windows 2008 system.
Thanks!

Fixed the unsupported version error (by compiling with appropriate java compiler in Eclipse), and the report launch error in the viewer was resolved as well.

Safari 4 & Private Browsing fails to work

Safari 4 & Private Browsing fails to work.
I check Private Browsing, accept what it says, and when I quit I expect that it will clear all that I want it to. But it is still there 100%. Any one see this problem?
-Apple //GS

Hi
You're welcome.
Which plist did you trash?
To bad I can't keep that checked 100% of the time.
Unfortunately, Private Browsing is intended to be a "conscious choice". You can add an Apple Script to open Safari automatically in Private Browsing. Here's direction from MacWorld.

FBML Fails to work.

Similar Messages

Maybe you are looking for