FCC File-XI-IDOC: Pl confirm the validity of parameters I have specified
Hi,
I have the scenario File-XI-IDOC. I have almost completed the IR and ID config minus the FCC part.
Need to do the FCC for reading the file which will enable me to map it to IDOC structure.
I have the following TextFile structure ( Note: each field in the file is fixed length )
Header( 1 record)
Data_header (1 record)
|_ Data_Item (Multiple records)
Trailer
As expected each node has multiple fields in it like:
Header = Source, Destination, Date
Data_header = Company, Country
Data_item = Office1 address, postcode1,
Data_item = Office2 address, postcode2,
Data_item = Office3 address, postcode3,
Trailer = Checksum, Carriage_return_value
I have keyed in the following values into the various FCC parameters.
Appreciate if you could confirm if they are correct. (pl provide correct values, if needed)
Recordset_name: (should I put any value heer???)
Recordset Structure: Header,1,Data_header,1,Data_item,*,Trailer,1
Key field: (should I put any value heer???)
Header.fieldfixedlengths = 10,10,8
Header.endseparator = 1310 ( Header record ends with a carriage return value 13 followed by line feed character 10)
Header.fieldnames = Source, Destination, Date
Header.Keyfieldvalue = 1 (Should I put anything here??)
Header.keyfieldinstructure = u2018ignoreu2019
Data_Header.fieldfixedlengths = 4,4
Data_Header.endseparator = 1310 ( Data Header record ends with a carriage return value 13 followed by line feed character 10)
Data_Header.fieldnames = Company, Country
Data_Header.Keyfieldvalue = 2 (Should I put anything here??)
Data_Header.keyfieldinstructure = u2018ignoreu2019
Data_Item.fieldfixedlengths = 40,7
Data_Item.endseparator = 1310 ( Data Item record ends with a carriage return value 13 followed by line feed character 10)
Data_Item.fieldnames = Company address, postcode
Data_Item.Keyfieldvalue = 3 (Should I put anything here??)
Data_Item.keyfieldinstructure = u2018ignoreu2019
Trailer.fieldfixedlengths = 2,2,1
Trailer.endseparator = T ( Trailer record ends with a character T)
Trailer.fieldnames = Checksum, Carriage_return_value, End_value
Trailer.Keyfieldvalue = 4 (Should I put anything here??)
Trailer.keyfieldinstructure = u2018ignoreu2019
Appreciate if you could confirm if they are correct.
Thanks and Regards
Shirin
Hi,
I am still confused with what do I do with the CR/LF character pair in my incoming file.
If possible could you let me know the value you would put in the fieldFixedlengths, endSeparator fields in all the recordsets.
As you can see all my data lines end with a value 1310, so do I not need to put it in FCC to let it know that data line is ending.
Appreciate your response.
Regards
Shirin
Header Section
Field Length Notes
Source [10]
Destination [10]
Message ID [10]
Created Timestamp [8]
CR/LF character pair [4] (Carriage return character (13) followed be line feed character (10) )
Data_Header Section
Field Length Notes
Company [4]
Country [4]
CR/LF character pair [4] (Carriage return character (13) followed be line feed character (10) )
Data_item Section
Field Length Notes
Address [40]
Postcode [7]
CR/LF character pair [4] (Carriage return character (13) followed be line feed character (10) )
So my file's Header and Data_header and Data_item will look like
STARSYSTEMSAP 1234567890200812121310
GB03GB 1310
101chamberlayne drive, Preston,UK, E149PL 1310
Similar Messages
-
How do I recover a file what was written in the 'notes' app that I have accidentally deleted?
how do I recover a file what was written in the 'notes' app that I have accidentally deleted?
If you have an iTunes backup or iCloud backup containing that note you can restore from that backup.
If you have no backups the note is gone. -
I'm trying to use "Home Sharing" feature in iTunes to import files from another user on the same iMac. We have 5 users and one user is unable to import files from other users. We get the error "You do not have enough access privileges to perform this operation." All users are logged in using the same Apple ID and everyone else can import files. What gives?
Had the same thing happen to me a few weeks back when I switched computers and migrated. Here's what worked on my iMac, so maybe it'll work on your iPad, too. Go to User(your home folder)/Music. Select/highlight your "Music" folder. Then do Command-I ("Get Info" from the File menu), click on the padlock icon in the lower right of the new window. Enter your user password. Click on your username just above the now-open padlock. Select "Read & Write" if it's on "Read Only," "Write Only," or "No Access." Now having your user account with "Read & Write" privileges (it may have been this way already; still do this next step), click on the gear on the bottom-center of that window. Click on "Apply to all enclosed items." When the pop-up says "Are you sure?" (or the equivalent), say "yes." This will grant access privileges to your user account for all the music files inside your music folder--all your iTunes stuff included). Then you should be good to go.
-
Hi All,
This is my first post to ms exchange forum am getting Log onto incoming mail server (POP3): Your server does not support the connection encryption type you have specified. Try changing the encryption method. Contact your mail server administrator
or Internet service provider (ISP) for additional assistance. in my outlook clients, till last Sunday (12.04.15) my exchange was well & good, Monday morning suddenly the problem started like none of our outlook pop3 clients are able to communicate
with exchange (rest IMAP, SMTP & Exchange accounts are working fine). i have tried with all port no but no luck. please help me to get raid of this one.
Exchange 2013 CU6 with server 2012 Std 64Bit
Thanks,
MuraliDear All,
I have found the solution for above problem, the problem has occur due to PopProxy inactivity
please find relevant exchange management shell commends below.
1. Get-ServerComponentstate -Identity <yourmailserver.com>
Server Component State
yourmailserver.com ServerWideOffline Active
yourmailserver.com HubTransport Active
yourmailserver.com FrontendTransport Active
yourmailserver.com Monitoring Active
yourmailserver.com RecoveryActionsEnabled Active
yourmailserver.com AutoDiscoverProxy Active
yourmailserver.com ActiveSyncProxy Active
yourmailserver.com EcpProxy Active
yourmailserver.com EwsProxy Active
yourmailserver.com ImapProxy Active
yourmailserver.com OabProxy Active
yourmailserver.com OwaProxy Active
yourmailserver.com PopProxy Inactive
yourmailserver.com PushNotificationsProxy Active
yourmailserver.com RpsProxy Active
yourmailserver.com RwsProxy Active
yourmailserver.com RpcProxy Active
yourmailserver.com UMCallRouter Active
yourmailserver.com XropProxy Active
yourmailserver.com HttpProxyAvailabilityGroup Active
yourmailserver.com ForwardSyncDaemon Active
yourmailserver.com ProvisioningRps Active
yourmailserver.com MapiProxy Active
yourmailserver.com EdgeTransport Active
yourmailserver.com HighAvailability Active
yourmailserver.com SharedCache Active
2. Set-ServerComponentState -Identity <yourmailserver.com> -Component PopProxy -Requester HealthAPI
-State Active
3. Get-ServerComponentstate -Identity <yourmailserver.com>
Server Component State
yourmailserver.com ServerWideOffline Active
yourmailserver.com HubTransport Active
yourmailserver.com FrontendTransport Active
yourmailserver.com Monitoring Active
yourmailserver.com RecoveryActionsEnabled Active
yourmailserver.com AutoDiscoverProxy Active
yourmailserver.com ActiveSyncProxy Active
yourmailserver.com EcpProxy Active
yourmailserver.com EwsProxy Active
yourmailserver.com ImapProxy Active
yourmailserver.com OabProxy Active
yourmailserver.com OwaProxy Active
yourmailserver.com PopProxy Active
yourmailserver.com PushNotificationsProxy Active
yourmailserver.com RpsProxy Active
yourmailserver.com RwsProxy Active
yourmailserver.com RpcProxy Active
yourmailserver.com UMCallRouter Active
yourmailserver.com XropProxy Active
yourmailserver.com HttpProxyAvailabilityGroup Active
yourmailserver.com ForwardSyncDaemon Active
yourmailserver.com ProvisioningRps Active
yourmailserver.com MapiProxy Active
yourmailserver.com EdgeTransport Active
yourmailserver.com HighAvailability Active
yourmailserver.com SharedCache Activ
Replace yourmailserver.com with your server host name.
Thanks -
File to IDOC stuck in the queue
Hi Expert,
I have a file to IDOC scenario. I checked in SXMB_MONI, I can see the file coming in. But it just stuck in the queue and won't send out to SAP system. When I checked the SMQ2, it tells me the status is "SYSFAIL'. I have checked my RFC, port, logical systems, profile etc. Just don't know where is wrong. Can somebody tell me what else I need to check? Thank you very much!
CharlesHi Charles
Check SMQ2 and double click on the queue with sysfail status.
It will show you a new screen with a more detailed error description.
Regards,
Giuseppe -
How do you confirm the validity of a Env or SvcCtx Handle
I have a fairly large legecy system using mostly ProC. However, we have found some use for OCI in some specific instances. So we have used the SQLEnvGet and SqlSvcCtxGet to get an Environment and Service Context handle of an existing ProC Session to allow us to use OCI without opening a second Db connection.
However, for some strange, but legitimate reason there will be a ProC Connect Release, and shortly after a new Connect which invalidates my handles.
The problem is, in the area where I use these handles, I know of no way of determining if this disconnect/connect event has occured and using these invalid handles causes some largely undesired results includeing core dumps.
Is there tools available that would allow me to check the validity of these handles before I attempt to use them?PSB Mktg wrote:
...If I did define my PMS Spot Channel then I did it by accident
You can tell if you have defined it by looking at your Channels palette. I would wager that it is not there based on your description.
http://www.planetphotoshop.com/working-with-spot-color-channels.html
As you have the suite, you might look at using Illustrator for logos. Photoshop is rarely used for logos. -
The IDOC-SDATA for the segment E1EDP01 does not have the whole value passed
HI
I am triggring the ORDERS05 Idoc from TCode - WE19 .
In the E1EDP01 segment I have populated the quantity field , UOM field , currency field and the plant field.
I am facing the issue
1) It is not updating the plant field in R/3 orders that are created .
2) I debugged the code and found that the data for the currency field and the plant field is not being pulled in the IDOC-SDATA for the segment E1EDP01 .
Any idea why is this happening
Thanks
NikhilHI
I got the answer for it.
This has to be delt in the E1EDP02 segment with the qualifier value as 083 and the document value as the plant
Thanks
Nikhil -
File is picked successfully from source but converted to xml format, no messages in SXMB_MONI?
Hi
Check this type error in Communication moniteing in Runtime workbench.
Check the data structure and length .
Regards
Upendra.v -
My laptop is fine all working but the track pad and mouse work fine but when i click on a file or a pic it does not open and i end up have ing to do a ctrl click and selcting open this is so anyoying plz help!!!
You say click on a file but your do mean you are double clicking to open the file, right?
-
Is Confirmation Message possible in case of File to IDOC
Hi Friends,
Its a File (sender) to IDOC (receiver) interface. Once the IDOC is posted correctly in SAP, is it possible to generate a confirmation message back to sender file?
I want to know if there is any way to inform the sender system that the transaction was successfully created.
Thanks in advance.
Regards,
Meghna.
Edited by: meghna swaraj on Mar 27, 2008 1:53 PMHi Friends,
Its a FILE to IDOC interface. confirmation message back is needed to sender file, for that I followed the below link for Configuring the IDOC acknowledgment ALEAUD.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
As specified in point 7 and 8, used the transaction RBDSTATE & created the variant SAP_AUDIT_SEND for report RBDSTATE and scheduled a background job at receiver system.
Here the problem is, acknowledgment for ALEAUD getting scheduled twice, as a result two IDOCs ALEAUD is generated.Instead it should get scheduled only once.
Can any one tell me why the job is getting scheduled twice.
Thanks in advance.
Regards,
Meghna. -
Content generation error. Please confirm the file can be opened in InDesign?
I have been trying to upload a couple of files to a folio that was built yesterday, everytime I try to upload one of them I recieve the error message "Content generation error.Failed to open the InDesign file. Please confirm the file can be opened in InDesign." I have no idea why this is happening as one of the files was successfully uploaded to the folio yesterday and I have not made any changes to it since. I have a also restarted and trashed InDesign preferences so there are no problems there. If anyone has any answers or has experienced any similar problems could you please let me know.
Thanks
Adam FlanaganThat was the first thing I tried because obviously I wanted to find out if it was a problem with my file or a general issue with all uploads to that folio. It seems to be working ok now, although I still have no idea what the problem was and I have never seen that error message before :s
Thanks for your response.
Adam -
Special character in File to IDoc
Hi,
am working on file to Idoc scenario.
The data is populated as expected in to the segments but when i see the idoc in the receiving system the special characters are replaced by #
For ex
how LII u201Cexceeds industry benchmarks and defeats stereotypesu201D
is cming as LII #exceeds industry benchmarks and defeats stereotypes#
Any suggestions to display the special characters.In your File Sender channel you can set the File Encoding Scheme of your choice. We had a similar case where special characters were seen as # . Once we changed the Encoding scheme to ISO-8859-1 it worked fine.
Refer to the below link
http://help.sap.com/saphelp_nw04/helpdata/EN/e3/94007075cae04f930cc4c034e411e1/content.htm
-Mala -
File to Idoc Scenario. Pls advice
Hi All,
I have implemented File to Idoc Scenario and it worked fine.
I have 2 doubts:
My Scenario: File -- XI -- R/3 system named D01
1. In Configuration: In Receiver Aggrement why we put
XI Business System name in Sender Service?
2. In Configuration when I open my R/3 Business system
(D01CLNT100) and click on Adapter Specfic Identifiers I can
see my Logical System Name as D01CLNT100.
When I use SALE tx. in D01 R/3 system I can see
D01CLNT100 as logical system
Question: If I use SALE transaction and change my
logical system name to "test" , do I need to change the
name "test" in SLD and then for R/3 Business system
(D01CLNT100) in Adapter Specfic Identifiers I will see new
Logical System Name as test.
RegardsHi,
Question: If I use SALE transaction and change my logical system name to "test" , do I need to change the name "test" in SLD and then for R/3 Business system (D01CLNT100) in Adapter Specfic Identifiers I will see new Logical System Name as test
Yes , you need to Update the name in SLD and just Do SLD Data Cache in ID-- Environment to reflect the same name in Identifiers place.
>>1. In Configuration: In Receiver Aggrement why we put XI Business System name in Sender Service?
You might have used XI as Sender and you might have placed the file in XI Server to pickup.
Thats why you are using Xi's Business System name as Sender Serveice.
Regards
Seshagiri -
File to Idoc : Java Mapping
Hi Experts,
The scenario is file to idoc. In the file i'll be getting name,value pairs. For ex:
Structure is
MT
....Root(1..unbounded)
............Name
............Value
File contains:
Vishal....1
Raj.........2
RFC......10
Rahul.....20
Azhar....15 and so on..
I need to loop through the file. When Name="RFC", I need to make an RFC call with Value as it's input. RFC returns 4 values which will be used for mapping.
Then I need to continue looping through the file. On encountering a particular Name, I need to map corresponding Value to target field.
For this, I should have 2 mappings. One to read the file and the other for mapping. I've never used RFC and Java mapping, Can someone provide me a link or a solution for this?
Thanks,
VishalHi,
You can do this using a UDF.
first let the source message contain first line and last line which you want to eliminate.
change the context of the Value to MT ..
start a for loop in UDF ignoring first & last line like
for(int i = 1; i< input.length() - 1; i++) // here i = 1 & not zero & input length is -1 so that first & last field eliminates
//carry on string operation to separate name & value on delimeter space
String name = input<i>.subString(0,.... to the indexOf space);
//similar for value also....
now you have name & value
check for name == 0052
if(name == 0052)
perform rfc lookup
else -
File to IDOC- Status 51:Application document not posted
Hi Experts,
I'm doing a File to IDOC scenario. The Idoc is getting added and then it is trying to post it to the application but i get the error saying that "Fill all required fields SAPMF02D 0111 ADDR1_DATA-COUNTRY".
The idoc type i'm using here is debmas06. The source file doesn't provide all the data and the idoc type doesn't really contain the field addr1_data in it. What is wrong?
Plese help.
Thanks ,
MerrillyHi
For Idoc type debmas06 there are few mandatory fields such as ADDR1_DATA-COUNTRY.
Check if the ADDR1_data is segment in IDOC not field.
While passing the data from file to xi to IDOC these mandatory fields are not filled up.
Probably you need to identify these fields and have to pass the default values if incase the inputs are not in file.
In We30/we31 you can check with the segment editor for the mandatory status of the fields.
Thanks
Swarup
Maybe you are looking for
-
How to Export Data from a table in database directly to Excel.
Hi, I have some sqls that i need to run on a daily basis.My client wants them to be scheduled through a job and the result output of the query should be in the form of Excel. Now i am no sure how to do this.Is there any in-built function in the DBMS
-
How to do the validation in sap xi (input file)
hi, how to do the validation in sap xi (input file)? regards Ruban
-
Document number not available in BSAD Table even after clearing
Dear Experts, with the FM posting_interface_start, posting_interface_clearing, posting_interface_end iam able to post the document with clearing using Tcode f-30/fb05 and can see the document number getting generated and when i see the BSAD table wit
-
Buttons are moving in widescreen
I´ve just made a simple menu in iDVD 6. It works perfectly fine until I burn it and play it on a PC. I´ve made two buttons that are just text. One colour first end antother when mouse over. The problem I get when I look at it in the PC is that the mo
-
Hi Experts, Following is our Landscape Details.... 1. BI 7.0 2. BO XI3.1 We seem to face a unique problem, we have successfully configured an SSO between BI and BO wherein Roles in BI get created as groups in BO. But the problem faced with the same i