FCC in SFTP

Hi Experts,
Can someone explain how FCC can be performed on this file
HEADER:ABC:XYZ
1234 aJHJS
1245 AJSHJD
7895 WSTA4556
4588 AHGSDJ_AHSHA
END
to get this into following structure
<?xml version="1.0" encoding="utf-8"?>
<ns:MT_Source xmlns:ns="Some/address">
<Record>
 <Value>HEADER:ABC:XYZ</Value>
 </Record>
 <Record>
 <Value>1234 aJHJS</Value>
 </Record>
 <Record>
 <Value>END</Value>
 </Record>
where each line of the file is taken into the field 'Value'
Thanks in advance,
Vishal

Hi,
If you can see sFTP adapter in adapter type then check its namespace. it shoudl be seeburger or aedaptive solution or anything like this.
go to their webpage and see whether they support FCC or not. Also check the possibility of using modules (so that you can use palin2xml module, if they dont support fcc) with the adapter
All third party vendors shoudl support this functionality of converting plain to xml
Regards
Sura

Similar Messages

How to do FCC with SFTP adapter (BIC MD tool)

Dear All,
Hi guys...can anyone tell how to do FCC with SFTP adapter (Seeburger).
Can BIC MD tool do the FCC required. can anyone provide link which tells steps to perform FCC with BIC MD.
we know that we can use the standard module for it. but we are trying to explore this BIC MD and its limitations.
Regards,
Senthilprakash

Hi,
Im closing this thread as its open for long time now.
well i have even found the solution for the same.
SFTP adapter as such does not have FCC functionality.
we have to use SAP Modules for performing FCC in SFTP adapter.
for complex conversions (more than 3 levels) we can use BIC tool and then deploy the module in our adapter.
Regards,
Senthilprakash.

How do we do File content conversion using SFTP SEEBURGER Adapter

HI All,
Can we do FCC using SFTP SEEBURGER adapter. If yes how?
XIer

Dynamic attributes are part of the XI message. They provide options for dynamical configuration of SFTP receiver channels (Outbound direction) using parameters that have been dynamically added or set by modules and mappings before the SFTP adapter. These attributes can be set using the Attribute Mapper module for example. Besides, the SFTP adapter dynamically adds specific parameters to the XI message on Inbound case, which can be used by the modules and mappings after SFTP adapter.
Check also
/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping
/people/daniel.graversen/blog/2006/10/05/dynamic-configuration-in-adapter-modules
Regards
Naycho

Sender SFTP adapter configuration

Dear Experts,
we have one requairement to convert CSV file to xml messages, we are using the sender SFTP adapter.
kindly let me kow, how to convert csv to xml messages.
Regards
kiran

Hi kiran kumar,
There is no FCC in SFTP.you need to use Message Transfoem Bean in Module to convert csv file to XML.Configure module parameter as below:
Transform.Class = com.sap.aii.messaging.adapter.Conversion
Transform.ContentType = text/xml;charset=utf-8
xml.conversionType = SimplePlain2XML / StructPlain2XML
xml.processFieldNames = fromConfiguration
xml.documentName = MyDocument
xml.documentNamespace = http://xi.com/DocumentTest
xml.documentNamespaceScope = root (default Value)
xml.structureTitle (SimplePlain2XML) = MyTitle
xml.recordsetName (StructPlain2XML) = MyRecordset
xml.recordsetNamespace (StructPlain2XML) = http://xi.com/RecordsetTest
xml.recordsetNamespaceScope (StructPlain2XML) = root (default Value)
xml.recordsetStructure (StructPlain2XML) = NameA,1,NameB,*,NameC,1
xml.recordsetStructureOrder (StructPlain2XML) = asc (for Ascending) / var (for Variable)
xml.allowEmptyRecordsets (StructPlain2XML) = YES / NO
xml.recordsetsPerMessage (StructPlain2XML) = * (default Value)
xml.documentSkipFirstRows (StructPlain2XML) = 0 (default Value)
xml.recordsetBeginSeparator (StructPlain2XML) = ~ (blank by default)
xml.recordsetEndSeparator (StructPlain2XML) = ~ (blank by default)
xml.keyFieldName (StructPlain2XML) = MyKey
xml.keyFieldType (StructPlain2XML) = CaseSensitiveString / Float / CaseInsensitiveString / Integer
xml.fieldNames (*) = MyKey,field-name1,field-name2
xml.fieldFixedLengths or xml.fieldSeparator (*) = 3,3,3 or ~
xml.endSeparator (*) = u2018nlu2019
xml.beginSeparator (*) = u2018nlu2019
xml. enclosureSign (*) = ~
xml.enclosureSignEnd (*) = ~
xml.enclosureSignEscape (*) = ,
xml.enclosureSignEndEscape (*) = ,
xml.enclosureConversion (*) = YES / NO
xml.checkForXMLPredefinedEntities (*) = YES / NO
xml.checkForISOControls (*) = YES / NO
xml.addBeginSeparatorAsField (*) = YES / NO
xml.addEndSeparatorAsField (*) = YES / NO
xml.fieldContentFormatting (*) = trim (default Value), nothing
xml.keyFieldValue (*) = 001
xml. keyFieldInStructure (*) = add (default Value)

SFTP FCC module parameters

Dear Experts,
kindly provide the module parameters to convert CSV to xml messages in SFTP adapter.
please find the below my falt structure.
ENUMBER,ENAME,SAL,LAST_NAME,FIRST_NAME
1234 , srinu , 10lac , p,srinu
2344 , reee , 2 lac , y, ramu
Regards
Srinivas

Hi indra,
please find the details.
Regards
srinivas
EBNUMBER,CNUMBER,FLEX1_EIN,LAST_NAME,FIRST_NAME,ADDR_1,ADDR_2,ADDR_3,CITY,STATE_PROVINCE,ZIPCODE_5,COUNTRY,COMPANY_EMAIL,PHONE,AUTH_USERNAME,FLEX2,FLEX3,FLEX4,FLEX5,FLEX6,FLEX7
Q-EB-BTC-100883441,Q-C144401141,,FTP1,Surender,400, Crossing Blvd, Suite 101,,,Bridgewater,NJ,8807,USA,[email protected],1234567890,1234567890,EENADU,,,
Q-EB-BTC-100883441,Q-C144325571,,Tester,Info,400, Crossing Blvd, Suite 101,,,Bridgewater,NJ,8807,USA,[email protected],978.222.3333,itester,IUSA24,,,
Q-EB-BTC-100883441,Q-C144325561,,User,Admin,400, Crossing Blvd, Suite 101,,,Bridgewater,NJ,8807,USA,[email protected],978.111.2222,EENADU/[email protected],IUSA24,,,
Q-EB-BTC-100883441,Q-C144436291,,user,test,123 Main St.,Suite 5,,Boston,MA,2101,USA,[email protected],123546789,EENADU/[email protected],EENADU,,,,,
Q-EB-BTC-100883441,Q-C144424481,,.,Shashi,.,.,,.,.,.,IND,[email protected],.,EENADU/[email protected],,,,,,
Q-EB-BTC-100883441,Q-C144427611,,Kadali,Kiran,Corporate headquarters,800 King Farm Boulevard Suite 505,,Rockville,MA,MD 20850,USA,[email protected],123546789,EENADU/[email protected],INFIPS,,,,,
Q-EB-BTC-100883441,Q-C144391601,,user,test,123 Main St.,Suite 5,,Boston,MA,2101,USA,[email protected],123546789,[email protected],EENADU,,,,,
Q-EB-BTC-100883441,Q-C144421281,,Nag,Sur,123 Main St.,Suite 5,,Boston,MA,2101,USA,[email protected],123546789,EENADU/[email protected],EENADU,,,,,
Q-EB-BTC-100883441,Q-C144427631,,Surisetti,Laxman,Corporate headquarters,800 King Farm Boulevard Suite 505,,Rockville,MA,MD 20850,USA,[email protected],123546789,EENADU/[email protected],INFIPS,,,,,
Q-EB-BTC-100883441,Q-C144429231,,nagpal,Surender,1050 Central street,,,EastBridgewater,Massachusetts,2333,USA,[email protected],4803329416,EENADU/[email protected],EENADU,,,,,
Q-EB-BTC-100883441,Q-C144421251,,Nag,Sur,123 Main St.,Suite 5,,Boston,MA,2101,USA,[email protected],123546789,EENADU/[email protected],EENADU,,,,,
Q-EB-BTC-100883441,Q-C144391921,,Kajjam,Vishwanath,Survey No. 210,Lingampally, Rangareddy (Dist.),,Hyderabad,AP,500019,IND,[email protected],4044185752,[email protected],EENADU,,,,
Q-EB-BTC-100883441,Q-C144354151,,Test,SI,9,,,q,m,8,USA,[email protected],1234567890,EENADU/[email protected],EENADU,,,,,
Q-EB-BTC-100883441,Q-C144391911,,kyadari,Shiva,Survey No. 210,Lingampally, Rangareddy (Dist.),,Hyderabad,AP,500019,USA,[email protected],4044185752,[email protected],INFIPS,,,,
Q-EB-BTC-100883441,Q-C144391951,,Kajm,Vish,Survey No. 210,Lingampally, Rangareddy (Dist.),,Hyderabad,AP,500019,IND,[email protected],4044185752,,EENADU,,,,
Q-EB-BTC-100883441,Q-C144391941,,Kajm,Vish,Survey No. 210,Lingampally, Rangareddy (Dist.),,Hyderabad,AP,500019,IND,[email protected],4044185752,,EENADU,,,,
Q-EB-BTC-100883441,Q-C144392791,,surisetti,laxman,Lingampally,Suite 5,,Hyderabad,AP,22202101,IND,[email protected],123546789,,PROGEN,,,,,
Q-EB-BTC-100883441,Q-C144371601,,user,test,123 Main St.,Suite 5,,Boston,MA,2101,USA,[email protected],123546789,,,,,,,
Q-EB-BTC-100883441,Q-C144401151,,FTP2,Surender,400, Crossing Blvd, Suite 101,,,Bridgewater,NJ,8807,USA,[email protected],1234567890,,EENADU,,,
Q-EB-BTC-100883441,Q-C144392781,,surisetti,laxman,123 Main St.,Suite 5,,Boston,MA,2101,USA,[email protected],123546789,,EENADU,,,,,
Q-EB-BTC-100883441,Q-C144389041,,user,test,123 Main St.,Suite 5,,Boston,MA,2101,USA,[email protected],123546789,,EENADU,,,,,

SFTP Variable substitution error.

Hi,
my scenario is file to sftp fcc.
I have successfully configured the modules and able to put the ouput fcc file inthe target sftp directory,
But when implementing variable substitution i am facing issues getting error as
Error: com.aedaptive.sftp.adapter.exception.VariableSubstitutionException : Error during variable substitution: the following variable was not found in the message payload: var1
This is the input file:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:M_SFTP_FCC xmlns:ns0="http://xyz.com/pisandbox/testudf">
 <Detailed>
 <MFG_Name>XYZ</MFG_Name>
 <Model_Number>1234</Model_Number>
 </Detailed>
 <Header>
 <Order_No>345</Order_No>
 <Date_of_File>12122012</Date_of_File>
 </Header>
</ns0:M_SFTP_FCC>
Variable substitution decleration was:
var1 payload:M_SFTP_FCC,1,Detailed,1,Model_Number,1
i need to use the Model_NUmber.
getting followng error in Comm channel monitoring --> Audit Log
Unable to write message into file. com.aedaptive.sftp.adapter.exception.VariableSubstitutionException: Error during variable substitution: the following variable was not found in the message payload: var1
Unable to find where the error is when i configured through file adapter its working fine.
Thanks,
--Kishore.

HI,
your variable declartion is perfect, can you please check the below points,
 1.To specify variables in the target directory and file name scheme, they must be enclosed by % characters.
 2.variable name is case sensitive, can you give only lower case instead of giving upper case.
 3. Model_Number is giving same as per the message type.
Please look below link.
SAP NetWeaver XI: Variable Substitution with Adapter-Specific Message Attributes via DynamicConfigurationBean
http://wiki.sdn.sap.com/wiki/display/XI/CombiningthreedifferentaspectsofPIinoneshot
An interesting usage of Variable Substitution in XI
regards,
ganesh.
Edited by: ganesh.nijampudi on Dec 7, 2011 4:51 AM

SFTP Sender - content conversion to read Header & detail and control record

Hi Experts,
I'm just beginner in SAP PI. Just would like to know possibility for below requirement for my further reseach
Soure file format fix length with 3 different format(H,D,T)
As example
H001TestHeader1
D001001TestDetail11
D001002TestDetail21
T2
H002TestHeader2
D002001TestDetail21
T2
The requirement detail :
1. There are multiple set of H,D,T per files
2. T line is the record count of total D line per each H set. for example as green font we have 2 D line, So T show T2
3. If number in T line is not match with actual D line, then only these set should be filter out and write to error file and send email alert. for example as red font we have 1 D line, but T show T2
4. If number in T line is match with actual D line, then these set will be write to result file.
As I know that content conversion may be support this requirement for separate records set for H/D/T but I don't have idea how to handle requirement no.3 and 4, Is it need ccBPM? Please help to provide some overview guideline for my further research. Thank you.

As I know that content conversion may be support this requirement for separate records set for H/D/T
>>> For the FCC, you might be using Message Transformation bean and unfortunately MTB doesn't provide the option to split the message i.e. " Records set per message".
If you go for two step approach i.e. then you can use this option to split the records.
1) pass through interface -> SFTP -> NFS
2) NFS(Standard FCC) -> Your target system
I don't have idea how to handle requirement no.3 and 4, Is it need ccBPM? Please help to provide some overview guideline for my further research. Thank you.
>>> If you can split the file for each recordset i.e. one set of H/D/T then you can handle the validation part in message mapping.
If T has valid number of records then execute the mapping set the filename and directory to "result file" locations using dynamic configuration.
If T has invalid number of records then execute the mapping set the filename and directory to "error file" location.
To trigger the email from the message mapping refer to the below blogs -
Mail without email adapter? Part - I - Process Integration - SCN Wiki
How to send Alerts using UDF or JAVA Mapping

PI 7.4 - SFTP Adapter - Logs successful - No File Written

All,
We are on PI 7.4 Dual stack -
Scenario:
IDOC to FlatFile via Reciver SFTP adapter - FCC is done by XML2Plain adapter module.
The receiver comm channel logs are looking good. Please see below.
But we dont see any file on the SFTP server.
Please note that -
1. We were able to write a file to the SFTP server without using XML2Plain bean
XML2Plain module parameters.
Receiver Comm Channel - logs:
09/16/2014 04:03:38.457 PM Information Message was received by the messaging system. Protocol: XI URL: http://<PISERVER>:50000/MessagingSystem/receive/AFW/XI Credential (User): PIISDX1
09/16/2014 04:03:38.459 PM Information Using connection SFTP_http://sap.com/xi/XI/SFTP. Trying to put the message into the receive queue
09/16/2014 04:03:38.471 PM Information Message successfully put into the queue
09/16/2014 04:03:38.474 PM Information The message was successfully retrieved from the receive queue
09/16/2014 04:03:38.493 PM Information Delivering to channel: CC_GoodsMovementsFileRcv
09/16/2014 04:03:38.493 PM Information MP: processing local module localejbs/AF_Modules/MessageTransformBean
09/16/2014 04:03:38.493 PM Information Message status set to DLNG
09/16/2014 04:03:38.494 PM Information Transform: using Transform.Class: com.sap.aii.messaging.adapter.Conversion
09/16/2014 04:03:38.495 PM Information Transform: transforming the payload ...
09/16/2014 04:03:38.496 PM Information MP: processing local module localejbs/CallSapAdapter
09/16/2014 04:03:38.496 PM Information The message was successfully delivered to the application using connection SFTP_http://sap.com/xi/XI/SFTP
09/16/2014 04:03:38.496 PM Information Transform: successfully transformed
09/16/2014 04:03:38.498 PM Information Message status set to DLVD

Hi Naveen
There are a few typo errors in your configuration.
First one is xml.conversionType - your value have a lower case p while it should be in upper case (SimpleXML2Plain)
The next one is xml.endSeperator - should be xml.endSeparator.
Try to make these typo corrections to see if it helps.
Also, you have configured a lot of parameters that are not applicable for the SimpleXML2Plain conversion, i.e. documentName and documentNamespace, fieldNames, lastFieldsOptional, processFieldNames and structureTitle. These can be removed. You can refer to my blog below for the list of parameters that are applicable.
FCC parameter reference for MessageTransformBean module
Rgds
Eng Swee

Receiver FCC Structure For Header and Trailer

Hi Guys ,
I need to go for receiver FCC for header and trailer in PI .How the FCC in communication channel needs to be configured if I am taking a separate node for header and trailer in mapping .Output of the file should be as the file attached.
Thanks.
Regards.

Hi,
If you are using File communication channel as a reciver you can go with FCC.
Use record set structure as : Header,detail,trailer.
https://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Otherwise if you are going for SFTP to create the file ... follow the Indrajit suggestion..
Still facing any issue.. Please let us know..
Thanks,
Sreenivas...

SFTP to File Scenario using multiple files

Hi All,
I have a scenario wherein 2 separate CSV files ex a.csv and b.csv has to be picked up from the SFTP folder and the same has to be mapped and send to one single file ex c.csv.
Say a.csv contains fields Name,Address and b.csv contains Phone,Mobile and I need to map them as per FSD into c.csv which will then have Name,Address,Phone,Mobile
I am bit confused on how to do it.
Shall I use Additional File name option in SFTP sender channel configuration? In that case how will I use the FCC as we have 2 separate csv files and both the files are CSV files and needs to be converted to XML.
Any related threads will help.
Regards,
Shaibayan

Hi Inaki,
Thanks for your reply.
BPM is not an option in our case as we are told not to use BPM.
However as per the thread from Michael
"pick both files in one run (one as file, the other one as attachment - so one communication channel )
inside the mapping you can get the values from the attachment and do the mapping"
This part is fine and we can do the mapping by creating N:1 mapping but since our files are .csv files so a content conversion is required for both the a.csv and b.csv. How to go through with this.
The structure will be something like below in the message mapping after we add both the source structures in Signature Tab:
Message
     Message1
          MT_FILE_A
               RecordSet1
                    Name
                    Address
                    Field3
     Message2
          MT_FILE_B
               RecordSet2
                    Phone
                    Mobile
Can I use the below values for Content Conversion?
Document Name:MT_FILE_A,MT_FILE_B
Recordset Structure:RecordSet1,*,RecordSet2,* or we have to use MT_FILE_A.RecordSet1,*,MT_FILE_B.RecordSet2.*
And in the Name Value for Name do we need to use dot for each Document Name i.e.
MY_FILE_A.RecordSet1.fieldSeparator?
Regards,
Shaibayan

SFTP channel error

Hi,
I am using SFTP where I am converting a flat-file to XML using module. I am getting the following error in channel:
Could not deliver message to XI: com.sap.aii.af.service.cpa.CPAException: Couldn't retrieve inbound binding for the given P/S/A values: FP=;TP=;FS=Srv_AB;TS=;AN=AB_Pick_Send_out_asy;ANS=urn:whs:abc:mm:global:whsmgmt:pick:100;
where Srv_AB is the sender service, urn:whs:abc:mm:global:whsmgmt:pick:100 is MT namespace.
Thanks,
Vishal

I tested using 'Test Configuration'.. It is failing at Interface Det and Mapping:
Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_AB_Pick_Intermediate_to_DELVRY03_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; Parsing an empty source. Root element expected! </Trace>
Basically, I've an Interface mapping which uses Java mapping to create an Intermediate structure. This intermediate structure is then used as source message in graphical mapping.
First I do an FCC on the flat file(Contains special characters). This is the input to Java mapping. Can there be any problem because of special characters.
Thanks,
Vishal

Mapping problem due to FCC in sender file adapter

Hi All
I am doing File( Flat File ) to RFC Scenario.it is working fine..
the problem comes in mapping with multiple records.
FCC at sender file adapter is used
my Data Type are :
Source DT Target RFC import parameter(table).
E2ED20* ITEM*
 KEY VBELN
 VBELN POSNR
E2E24* CHARG
 KEY
 POSNR
 CHARG
*->>multiple occurence
E2ED20 and E2E24 are 2 segment ,KEY is used in FCC to identify E2EDL20 & E2EDL24
My source text file is like this :
E2EDL20 0200
E2EDL24 xyz
E2EDL20 0201
E2EDL24 abc
E2EDL24 efg
E2EDL24 mln
E2EDL20 0202
E2EDL24 gty
so the payload should be :
0200 xyz
0201 abc
0201 efg
0201 mln
0202 gty
in FCC ignoer record set= true
otherwise is not called...
i try to use split by value & use oneasmany , not helpfull.
in message mapping when i checked th field VBELN -> display queue
i am getting an array 0200
 0201
 0202 in white fields
thanks & regards
Ashutosh Rawat

Source payload
<?xml version="1.0" encoding="utf-8" ?>
- <ns:MT_MATNO_FILE xmlns:ns="urn:abc:xxx">
- <E2ED20>
<KZ>E2EDL20</KZ>
<FIELD1>020</FIELD1>
<VBELN>0083662685</VBELN>
</E2ED20>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900001</POSNR>
<CHARG>1078629</CHARG>
<LFIMG>3200</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900002</POSNR>
<CHARG>1078630</CHARG>
<LFIMG>1895</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900003</POSNR>
<CHARG>1079145</CHARG>
<LFIMG>1883</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900004</POSNR>
<CHARG>1079146</CHARG>
<LFIMG>3195</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
- <E2ED20>
<KZ>E2EDL20</KZ>
<FIELD1>020</FIELD1>
 <VBELN>0083662648</VBELN>
</E2ED20>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900011</POSNR>
<CHARG>1001450</CHARG>
<LFIMG>2946</LFIMG>
<MEINS>8PC</MEINS>
</E2E24>
- <E2ED20>
<KZ>E2EDL20</KZ>
<FIELD1>020</FIELD1>
 <VBELN>0083673936</VBELN> </E2ED20>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900012</POSNR>
<CHARG>1073953</CHARG>
<LFIMG>2458</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
</ns:MT_MATNO_FILE>
at target what required is
<item>
<VBELN>0083662685</VBELN>
<POSNR>900001</POSNR>
</item>
<item>
<VBELN>0083662685</VBELN>
<POSNR>900002</POSNR>
</item>
<item>
<VBELN>0083662685</VBELN>
<POSNR>900003</POSNR>
</item>
<item>
<VBELN>0083662685</VBELN>
<POSNR>900004</POSNR>
</item>
<item>
<VBELN>0083662648</VBELN>
<POSNR>900011</POSNR>
</item>
<item>
<VBELN>0083673936</VBELN>
<POSNR>900012</POSNR>
</item>
in Sender FCC
E2ED20.fieldFixedLengths 7,76
E2ED20.fieldNames KZ,VBELN
E2ED20.keyFieldValue E1EDL20
E2ED20.endSeparator 'nl'
E2E24.fieldFixedLengths 7,24,13,7,3
E2E24.keyFieldValue E1EDL24
E2E24.fieldNames KZ,POSNR,CHARG,LFIMG,MEINS
E2E24.endSeparator 'nl'
ignoreRecordsetName true
source file is already there...
Message was edited by:
 ashutosh rawat

Problem in Sender File Adapter using FCC with Variable structure

Hi Experts,
Hi Experts,
I have facing an issues while using FCC in Sender File adapter. Below are the configs for the same:-
Recordset structure required is ==HEADER,1,DATA,*,TRAILER,1
Recordset per message == *
Key Field Name == Key
(Sorry i dont know how to insert screen shot here..pls tell me how can i insert screen shots here on sdn)
HEADER.fieldSeparator           ,
HEADER.endSeparator           u2018nlu2019
HEADER.fieldNames               Key,x,y,zu2026
HEADER.keyFieldValue          1
HEADER.keyFieldInStructure      ignore
HEADER.fieldContentFormatting     trim
HEADER.additionalLastFields     ignore
HEADER.missingLastFields     ignore
DATA.fieldSeparator
DATA.endSeparator
DATA.fieldNames
DATA.keyFieldValue
DATA.keyFieldInStructure
DATA.fieldContentFormatting
DATA.additionalLastFields
DATA.missingLastFields
Using same variables for Trailer record as well.
Source CSV file which i am picking:-
ADSE ,RASD,replan Contact ,2 0080509 0 8:43:25   ,
EMPL ,0011111, S Top Up ,20080401 ,20080430 ,sdf ,                          00000000431250 ,2007                                    , , , , , ,20080414 18:07:35,
EMPL ,0222222, r Cash Award ,20070701 ,20070703 ,ded ,                          00000000023509 ,2007                                    , , , , , ,20080414 18:09:31,
EMPL ,0233333,   Cash Award ,20070801 ,20070831 ,df ,                          00000000044057 ,2007                                    , , , , , ,20080414 18:10:56,
EMPL ,0244444,   Cash Award ,20080101 ,20080111 ,sf ,                          00000000026717 ,2007                                    , , , , , ,20080414 18:08:29,
BTRL ,   5140,
When i tested the scenario and monitored it using MDT in CC monitoring tool its giving me below mentioned error.
The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
XML document must have a top level element. Error processing resource 'http://myurlname/mdt/me...
However if i change the occurence of DATA as some specific value for eg 4 instead of * it works fine.
Kindly help me in solving this problem.
Thanks,
Aditya Verma

Hi Madan,
Thanks a lot for giving me the way to this. But when i tested this with the below file its giving me the same error. Please let me know if i need to do any changes to the parameters mentioned above:-
ADSE ,ASDA,Sha replan Fr ont Feed Contact ,2 0080509 0 8:43:25   ,
EMPL ,0011111,   Cash Top Up ,20080401 ,20080430 ,TPV ,                          00000000431250 ,2007                                    , , , , , ,20080414 18:07:35,
EMPL ,0222222,   r Cash Award ,20070701 ,20070703 ,TPV ,                          00000000023509 ,2007                                    , , , , , ,20080414 18:09:31,
EMPL ,0233333, r Cash Award ,20070801 ,20070831 ,TPV ,                          00000000044057 ,2007                                    , , , , , ,20080414 18:10:56,
EMPL ,0244444,   Cash Award ,20080101 ,20080111 ,TPV ,                          00000000026717 ,2007                                    , , , , , ,20080414 18:08:29,
EMPL ,0255555,   Cash Award ,20080301 ,20080320 ,TPV ,                          00000000027870 ,2007                                    , , , , , ,20080414 18:08:25,
EMPL ,0266666,   Cash Award ,20071001 ,20071020 ,TPV ,                          00000000020681 ,2007                                    , , , , , ,20080414 18:09:31,
EMPL ,0877777,   Cash Top Up ,20080401 ,20080430 ,TPV ,                          00000000036000 ,2007                                    , , , , , ,20080414 18:07:05,
EMPL ,0888888,   Leaver Cash Award ,20071201 ,20071231 ,TPV ,                          00000000157200 ,2007                                    , , , , , ,20080414 18:11:29,
EMPL ,0899999, S Leaver Cash Award ,20080301 ,20080331 ,TPV ,                          00000000153530 ,2007                                    , , , , , ,20080414 18:07:42,
EMPL ,0800000, S Leaver Cash Award ,20070701 ,20070731 ,TPV ,                          00000000012234 ,2007                                    , , , , , ,20080414 18:08:34,
BTRL ,   5140,
This the original csv file which i'll get in live. Kindly suggest as ur solution worked with other file but not working with this scv file.
Thanks a lot,
Aditya.

PI 7.11 - FCC Receiver Adapter

Hi
I've got a simple xml which i have to convert in a fixed length text file. Is it possible to convert it using FCC with following structure:
 <root>
 <data>
 <record>
 <name>john</name>
 <surname>doe</surname>
 <zip>12345</zip>
 <city>abcd</city>
 </record>
 <record>
 <name>bart</name>
 <surname>simpson</surname>
 <zip>131313</zip>
 <city>springfield</city>
 </record>
 </data>
 </root>
I did this conversion already with PI 7.0, but i removed the <data> element to get a simpler substructure. Is it also possible without removing this?
I found following entry [Re: File Adapter Reciver Side: FCC Convetion Problum in PI 7.1], but it didn't works for me. Any suggestions?
Thanks in advance
Michael

Hi,
Are you looking for a content conversion at teh Receiver adapter or the sender adapter?
If you have defined teh structure in ur Data type as u have mentioned then don't remove anything because ur source file would be containing the following structure itself.
If you are getting the XML structure at source
<root>
 <data>
 <record>
 <item1>
 <item2>
 </record>
 </data>
</root>
the follow the same structure at the receiver side as well. If u want to delete the data node at teh receiver side then delete at teh source side FCC as well.
Just try and let me know. I will help you out.
Thanks
Veeru

Using secure FTP (SFTP) with XI 3.0.

Hi,
I must bring a document with SFTP protocol.
Is it possible use SFTP with XI 3.0. What must I do use SFTP with XI. Is it necessary to install some component to XI or it needs some 3hrd party components?
Thanks

Hi Cemil,
Right now, XI does not have the feature of communicating with SFTP. You can extend the functionality of the File Adapter by writing some adapter modules to enable it to communicate with SFTP.
Regards,
Hari.

FCC in SFTP

Similar Messages

Maybe you are looking for