Problem in Sender File Adapter using FCC with Variable structure

Hi Experts,
Hi Experts,
I have facing an issues while using FCC in Sender File adapter. Below are the configs for the same:-
Recordset structure required is ==HEADER,1,DATA,*,TRAILER,1
Recordset per message == *
Key Field Name == Key
(Sorry i dont know how to insert screen shot here..pls tell me how can i insert screen shots here on sdn)
HEADER.fieldSeparator           ,
HEADER.endSeparator           u2018nlu2019
HEADER.fieldNames               Key,x,y,zu2026
HEADER.keyFieldValue          1
HEADER.keyFieldInStructure      ignore
HEADER.fieldContentFormatting     trim
HEADER.additionalLastFields     ignore
HEADER.missingLastFields     ignore
DATA.fieldSeparator
DATA.endSeparator
DATA.fieldNames
DATA.keyFieldValue
DATA.keyFieldInStructure
DATA.fieldContentFormatting
DATA.additionalLastFields
DATA.missingLastFields
Using same variables for Trailer record as well.
Source CSV file which i am picking:-
ADSE ,RASD,replan Contact ,2 0080509 0 8:43:25   ,
EMPL ,0011111, S Top Up ,20080401 ,20080430 ,sdf ,                          00000000431250 ,2007                                    , , , , , ,20080414 18:07:35,
EMPL ,0222222, r Cash Award ,20070701 ,20070703 ,ded ,                          00000000023509 ,2007                                    , , , , , ,20080414 18:09:31,
EMPL ,0233333,   Cash Award ,20070801 ,20070831 ,df ,                          00000000044057 ,2007                                    , , , , , ,20080414 18:10:56,
EMPL ,0244444,   Cash Award ,20080101 ,20080111 ,sf ,                          00000000026717 ,2007                                    , , , , , ,20080414 18:08:29,
BTRL ,   5140,
When i tested the scenario and monitored it using MDT in CC monitoring tool its giving me below mentioned error.
The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
XML document must have a top level element. Error processing resource 'http://myurlname/mdt/me...
However if i change the occurence of DATA as some specific value for eg 4 instead of * it works fine.
Kindly help me in solving this problem.
Thanks,
Aditya Verma

Hi Madan,
Thanks a lot for giving me the way to this. But when i tested this with the below file its giving me the same error. Please let me know if i need to do any changes to the parameters mentioned above:-
ADSE ,ASDA,Sha replan Fr ont Feed Contact ,2 0080509 0 8:43:25   ,
EMPL ,0011111,   Cash Top Up ,20080401 ,20080430 ,TPV ,                          00000000431250 ,2007                                    , , , , , ,20080414 18:07:35,
EMPL ,0222222,   r Cash Award ,20070701 ,20070703 ,TPV ,                          00000000023509 ,2007                                    , , , , , ,20080414 18:09:31,
EMPL ,0233333, r Cash Award ,20070801 ,20070831 ,TPV ,                          00000000044057 ,2007                                    , , , , , ,20080414 18:10:56,
EMPL ,0244444,   Cash Award ,20080101 ,20080111 ,TPV ,                          00000000026717 ,2007                                    , , , , , ,20080414 18:08:29,
EMPL ,0255555,   Cash Award ,20080301 ,20080320 ,TPV ,                          00000000027870 ,2007                                    , , , , , ,20080414 18:08:25,
EMPL ,0266666,   Cash Award ,20071001 ,20071020 ,TPV ,                          00000000020681 ,2007                                    , , , , , ,20080414 18:09:31,
EMPL ,0877777,   Cash Top Up ,20080401 ,20080430 ,TPV ,                          00000000036000 ,2007                                    , , , , , ,20080414 18:07:05,
EMPL ,0888888,   Leaver Cash Award ,20071201 ,20071231 ,TPV ,                          00000000157200 ,2007                                    , , , , , ,20080414 18:11:29,
EMPL ,0899999, S Leaver Cash Award ,20080301 ,20080331 ,TPV ,                          00000000153530 ,2007                                    , , , , , ,20080414 18:07:42,
EMPL ,0800000, S Leaver Cash Award ,20070701 ,20070731 ,TPV ,                          00000000012234 ,2007                                    , , , , , ,20080414 18:08:34,
BTRL ,   5140,
This the original csv file which i'll get in live. Kindly suggest as ur solution worked with other file but not working with this scv file.
Thanks a lot,
Aditya.

Similar Messages

Problem in sender file adapter

Hi all,
I have a sender file adapter using ftp with processing mode delete. But my input file is not getting deleted. In RWB, the adapter satus is green with msg processed sucessfully. I tried with a file name that is not available in the ftp folder, but still the adapter status is green with msg processed succesfully.
Help me debug this error.
Regards,
Jai Shankar.

Are you using Content conversion ?
If adapter monitoring is green, and shows processed successfully, then if you have any errors , you can see in the RWB->Message Monitoring->Audit Log (Message display Tool).
If there is no error, then try to do the cache refresh as I told. Ask Admin help for that. Restarting a Adapter engine may help you here/
Regards,
moorthy

Unable to configure file adapter using FCC for Multilevel hierarchy

Hi Experts,
Can anyone help me in configuring the Receiver file adapter with FCC for the structure given below
<Root>
<Level1>
 <Ele1>
 <Ele2>
 <Level2>
 <Ele2_1>
 <Ele2_2>
 <Level2a>
 <Ele2a_1>
 <Ele2a_2>
 </Level2a>
 </Level2>
</Level1>

Hi dineshmale,
I have do this Multilevel hierarchy before. FCC can directly configure this scenario. But I don't know you output format. What my format shown below(here i use '#' instead of space):
Level1_Field1##Level1_Field2##Level1_Field3##Level2_Field1##Level2_Field2##Level3_Field1##Level1_Field2
#################################################################Level3_Field1##Level1_Field2
#######################################Level2_Field1##Level2_Field2##Level3_Field1##Level1_Field2
#################################################################Level3_Field1##Level1_Field2
Level1_Field1##Level1_Field2##Level1_Field3##Level2_Field1##Level2_Field2##Level3_Field1##Level1_Field2
#################################################################Level3_Field1##Level1_Field2
#######################################Level2_Field1##Level2_Field2##Level3_Field1##Level1_Field2
#################################################################Level3_Field1##Level1_Field2
#################################################################Level3_Field1##Level1_Field2
FCC Parameter:
Recordset Structure: Level1,Level2,Level3
Level1.fieldSeparator = (2 spaces)
Level2.beginSeparator = (some spaces according to the length of the fields in Level1)
Level2.fieldSeparator = (2 spaces)
Level3.beginSeparator = (some spaces according to the length of the fields in Level1and Level2)
Level3.fieldSeparator = (2 spaces)
Level3.endSeparator = \n
There are some points:
1. the endSeparator for Level1 and Level2 doesn't work.
2. the first begin separator in Level2 and Level3 doesn't work.
3. The last field of super node and the first field of child node is separated by the (child).fieldSeparator.
4. ....
What's more, I have write a blog of FCC For Hierarchical Structure in Receiver Channel just now. So it need two days for Approval. Let me know for any issues.
Edited by: guKidd on Dec 14, 2010 7:52 AM
Edited by: guKidd on Dec 14, 2010 7:54 AM

How to make call to Sender Soap Adapter using HTTPS with Client Aut

Hello everyone, I have spent some time trying to get this to work. We downloaded a trail certificate from SAP and installed it on our machine and I created a webservice that works great. I tested the HTTPS without client authentification and it works great, as soon as I change it to use with Client Authentification I can't get it to go through. I am using Soap Sonar to test the certificates. To get the certificate I called the url with firefox then saved the certificate in my trust store, from there I import it to soap sonar as a signed certificate, but I am getting the error <Exception>Object contains only the public half of a key pair. A private key must also be provided.</Exception> I assume I am doing something way wrong, is there a way to get the certificate with both public and private key pair, or a way to test this that I can't seem to find in documentation or blogs?
I def award points
Cheers
Devlin

Hi
I think This link is useful to u
http://www.sapag.co.in/SAP-XI-SOAP-Adapter-FAQ'S.html
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40611dd6-e66e-2910-f383-e80fb44f9cd4
Thanks
Santosh

Unzip file using PayloadZipBean in Sender FILE adapter

I am trying to unzip a flat file in Sender FILE adapter using PayloadZipBean.
I am getting mapping error. The problem is File adapter is reading data without unzipping. I am getting weird characters/data, so mapping error.
I searched all the blogs/ forum threads and help.sap.com, everywhere the focus is on zipping, not unzipping.
the file I have is with .gz extension, but I tried with .zip extension also.
Please help in resolving this issue.
Edited by: Gopal Janagama on May 2, 2008 11:42 PM

Gopal,
GZIP and ZIP format are slightly different, as stated here :
"GZIP compresses only one file and does not have a header. ZIP contains header information about what files are contained in the file."
So I'm not sure the PayloadZipBean supports GZIP format ... Try to ungzip and then zip its content and see if the bean works for it
Rgds
Chris

Problem facing in sender file adapter

Hi XI gurus,
I am facing a problem in sender file adapter communcation channel
Is there any restriction in XI that XI picks max of 100 at a time .
Actaully probolem here is My XI sender file adapter need to pick 2800 file from ftp.
adapter need to file pick files ranging SAP_OUT_066581_280_INV.xml to SAP_OUT_SZ22TXN066581_2800_INV.xml
to pick these we have given file name as u201CSAP_OUT_*_INV.xmlu201D when ever given this XI is coming with no messges.
when ever file name is given as SAP_OUT_SZ22TXN066581_3*_INV.xml it XI has picked file from 300 to 399
when eve tried with the options to pick all the message
SAP_OUT_SZ22TXN066581_*_INV.xml Failed with no messaege
even atleast tried to pick 1000 mesaanges from 1000 to 1999
i have given like this
SAP_OUT_SZ22TXN066581_1*_INV.xml failed with no messages
while trying with option xi picking file max 100 at a time
SAP_OUT_SZ22TXN066581_1*_INV.xml
SAP_OUT_SZ22TXN066581_11*_INV.xml
SAP_OUT_SZ22TXN066581_12*_INV.xml
like this I am increaing the number and picking maximum of 100 messages only
Is there any way to auto mate this or nny file names need to be required
waiting for your reply

Check SAP Note 821267 - FAQ: XI 3.0 / PI 7.0/ PI 7.1 File Adapter.
I guess point 8 might relate to your problem if the FTP adapter timeout occurs.
check the note 849089 as well.
Also check point 13 and 26.
Gaurav Jain
Points if answer is useful
Edited by: Gaurav Jain on Jun 6, 2008 4:20 PM

Sender file adapter Adapter with out Key field

Hi All
i do have have a requirment ,Sender file adapter , for FCC but file is with out Key field
HEADER>
<DATA1>
<DATA2>
<DATA3>
<HEADER> file structure
<ITEM>
<ITEM1>
<ITEM2>
<ITEM3>
<ITEM
and the file si
'10001,20081902,US
10,soda,1
30,soda,4
40,soda,5
10002,20081902,US
10,steel,1
30,steel,4
40,steel,5
, and i need to identify the Header and Item using there lenght only , please anyone as idea abt this help me

Why to post the same question TWICE... in 30 min ? you don't like the answers ?
File content Conversion Issuse for a Sender File Adapter

Sender File Adapter not able to get file via FTP from an external system

Hi,
I have a Sender File Adapter using FTP which polls a server every 10 seconds looking for a file ".xml". The adapter will connect and pick up the waiting file, but sometimes the adapter not able to get file via FTP from an external system. The file is on the server, but despite the polling, the adapter does not pick up it. There is no return error.
The connect mode is Permanently and the transfer mode is Binary.
Can you help me?
Thanks.
T.

Hi Teresa,
does this case appears with a file size higher the others?
Personally, I do not recommend to have a polling under 1min.
10s could be too just, if the file is not small and/or if the file server is far (several kilometers) to where the Adapter Engine is, and/or this file server is beside a firewall. Do not forget also that, with previous points, you could have like a conflict, betwen the 1st polling and the 2nd polling, if in less 10s PI adapter has not enough time: to connect to the FTP server (several Km), find the file (perhaps among 100 other files in the directory), go back to the file to Adapter Engine server (several Km again), convert your file to XML message (with a complex Content Conversion), then check the XML structure, and when all that is done, return back to FTP server (several Km), to archive the source file... Well It's my understanding of a FTP exchange with FILE adapter...
If you really need a 10s polling, that's mean your have a pseudo real time interface. In that case, in my mind file should not be used! but we should use a Web service, JDBC JMS (any exchange without a physical object like a file). For me, it's a non-sens to have a file in that case.
regards.
mickael

File renaming in Sender file adapter usins OS command

Hi Guys ,
Can anyone explain on how to use the rename command in Sender file adapter using OS command parameter.
Thanks,
KC.

Hey
run the following OS command
mv <originalFileName> <newFileName>
This command will copy the <originalFileName> to a new file called <newFileName> and will delete the <originalFileName>
There is no rename command in Unix,mv is used to rename the files
Thanx
Aamir

Mapping problem due to FCC in sender file adapter

Hi All
I am doing File( Flat File ) to RFC Scenario.it is working fine..
the problem comes in mapping with multiple records.
FCC at sender file adapter is used
my Data Type are :
Source DT Target RFC import parameter(table).
E2ED20* ITEM*
 KEY VBELN
 VBELN POSNR
E2E24* CHARG
 KEY
 POSNR
 CHARG
*->>multiple occurence
E2ED20 and E2E24 are 2 segment ,KEY is used in FCC to identify E2EDL20 & E2EDL24
My source text file is like this :
E2EDL20 0200
E2EDL24 xyz
E2EDL20 0201
E2EDL24 abc
E2EDL24 efg
E2EDL24 mln
E2EDL20 0202
E2EDL24 gty
so the payload should be :
0200 xyz
0201 abc
0201 efg
0201 mln
0202 gty
in FCC ignoer record set= true
otherwise is not called...
i try to use split by value & use oneasmany , not helpfull.
in message mapping when i checked th field VBELN -> display queue
i am getting an array 0200
 0201
 0202 in white fields
thanks & regards
Ashutosh Rawat

Source payload
<?xml version="1.0" encoding="utf-8" ?>
- <ns:MT_MATNO_FILE xmlns:ns="urn:abc:xxx">
- <E2ED20>
<KZ>E2EDL20</KZ>
<FIELD1>020</FIELD1>
<VBELN>0083662685</VBELN>
</E2ED20>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900001</POSNR>
<CHARG>1078629</CHARG>
<LFIMG>3200</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900002</POSNR>
<CHARG>1078630</CHARG>
<LFIMG>1895</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900003</POSNR>
<CHARG>1079145</CHARG>
<LFIMG>1883</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900004</POSNR>
<CHARG>1079146</CHARG>
<LFIMG>3195</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
- <E2ED20>
<KZ>E2EDL20</KZ>
<FIELD1>020</FIELD1>
 <VBELN>0083662648</VBELN>
</E2ED20>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900011</POSNR>
<CHARG>1001450</CHARG>
<LFIMG>2946</LFIMG>
<MEINS>8PC</MEINS>
</E2E24>
- <E2ED20>
<KZ>E2EDL20</KZ>
<FIELD1>020</FIELD1>
 <VBELN>0083673936</VBELN> </E2ED20>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900012</POSNR>
<CHARG>1073953</CHARG>
<LFIMG>2458</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
</ns:MT_MATNO_FILE>
at target what required is
<item>
<VBELN>0083662685</VBELN>
<POSNR>900001</POSNR>
</item>
<item>
<VBELN>0083662685</VBELN>
<POSNR>900002</POSNR>
</item>
<item>
<VBELN>0083662685</VBELN>
<POSNR>900003</POSNR>
</item>
<item>
<VBELN>0083662685</VBELN>
<POSNR>900004</POSNR>
</item>
<item>
<VBELN>0083662648</VBELN>
<POSNR>900011</POSNR>
</item>
<item>
<VBELN>0083673936</VBELN>
<POSNR>900012</POSNR>
</item>
in Sender FCC
E2ED20.fieldFixedLengths 7,76
E2ED20.fieldNames KZ,VBELN
E2ED20.keyFieldValue E1EDL20
E2ED20.endSeparator 'nl'
E2E24.fieldFixedLengths 7,24,13,7,3
E2E24.keyFieldValue E1EDL24
E2E24.fieldNames KZ,POSNR,CHARG,LFIMG,MEINS
E2E24.endSeparator 'nl'
ignoreRecordsetName true
source file is already there...
Message was edited by:
 ashutosh rawat

Sender file Adapter, problem with proxy authentication

HI all,
i'm having some problems with the following scenario, i need to configure a sender file adapter which connects to a FTP server. To connect this FTP server i need to set a proxy (and so a username and a password), and i don't know how to do.
From note 821267 seems that the proxy is not supported for an FTP adapter, but the are some workaround like the ones described in the following link
Re: Proxy server inFTP adapter
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=57137
They don't work in my case as i need to se two username (the one for proxy and the one for the ftp server) and i cannot force the proxy use for all XI applications.
Can anyone help me?
Thanks a lot
Aldo

Proxy is necessary to exit the customer local intranet. It's not possible to go outside network without going through the proxy server.
I cannot set the proxy server in file adapter as it's not supported like described in SAp note, a possible workarounf is to force the proxy server in the J2ee stack but in this way all PI calls would use that proxy..

Vaildating File name with the data in the file using sender file adapter

Hi,
Below is the scenario
1) Pick up files from a FTP server, the file name is dynamic, how do I put dynamic name in sender file adapter?
2) Determine if the user correctly named the file based on data in the file.
a. File naming structure that we will be concerned with is <company_code><accounting_time_period>.<extension>
b. The company code and the time period in the file name have to match the data in the file.
i. For example. If the file name is 1001_200712.csv and the data in the file is for company code 1005, time period 200712, the file is incorrectly named. Both values must be correct.
How do we do this?

Hi Sachin,
 As Rightly said by Krishna, You can not put Dynamic name in sender File Adapter .You have to provide the name of the file like "*.txt" in Sender Adapter and at runtime you can access this file name by using following UDF:
DynamicConfiguration conf = (DynamicConfiguration) container
.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String valueOld = conf.get(key);
return (valueOld);
As now you have picked up the file name at runtime.
Now concatenate source file fields Company_code and Accounting_timeperiod using "_" as delimiter in properties.Also concat the extension .Now you have required file name.
So using EQUALS standard function ,compare it with File Name fetched at runtime using above given UDF, and pass result as you desire to process further or not or to raise Alert to resend the file.
Thanks & Regards,
Anurag Garg
You can validate this file name in Mapping itself.

Sender file adapter Need to Get Only one record Using FCC

Hi All,
              I am using File to ABAP Proxy interface, where i need to Trigger my proxy so in my sender file adapter , i need to configure as such it is should take only one record, from whole file i am using Key field parametrs in FCC but it is taking all the records which is not having the key fields also
please help me
Thanking you
Sridhar

2A64310       1 6V83970       03751650016001154000                    1 6V9961XT-3   13236157001160
2A64310       1 6V83970                        000                    1 6V9962XT-3   23236162
2A64730       1 6V83970       03751650016000106000                    1 6V9962XT-3   13236162000112
2A64730       1 6V83970                        000                    1 6V9961XT-3   23236157
2A64741 6V99481 6V83971 4S541403751650016000152360                    1 6V9964XT-3   13236168000166
2A64741 6V99471 6V83971 4S5414                 000                    1 6V9963XT-3   23236167
2A64772 6V99492 6V83982 3S860605001650017000244000                    2 6V9965XT-3   13289090000248
2A65690       1 6V97460       07501226872000110000                    11242153L&MP   1
2A65690       1 6V97460                        000                    11242121L&MP   2
EOF
this is sample file , i need to have any one line , cause i need to just trigger a proxy , i am not to going tp take entire file cause in real time i will getting 100 MB file which will be a performance issue

Small problem in sending chinese charaters using file adapter

Hi,
Actual scenario is,
Sender system -> file adapter -> XI -> ABAP Proxy -> Receiver system.
error is occured when the data reached the XI.
                                                                                1. The data file contains Chinese characters (Unicode).
2. When file adapter reads this file, the data in the payload no longer
    shows Chinese characters.
Can you please help in this regard...
Thanks,
Surya.

Hi,
Actually i am sending an EXCEL sheet which contains chinese charaters to XI using sender file adapter.
When file adapter reads this file, the data in the payload no longer shows Chinese characters.
what i need to do?
SUrya...

System error when send file with Sender File Adapter

Hi all,
I have configured a "File To ABAP Proxy" scenario. After configuring, i executed a "Test Configuration" in Integration Directory and it's all OK. But this file unable to reach into ABAP Proxy Target. In the Runtime WorkBench\Message Monitoring, I get an error message in below:
Engine: Adapter Engine
Status: *System Error *
Start: 15.08.2008 14:04:01
End: 15.08.2008 14:19:01
Sender Service: BS_XI_SERVER
Interface Servic: urn://FILE_TO_PROXY
MI_EMPLOYEE_OB
In this case, I don't know why my Sender File Adapter is error and why status is "System Error" and why it can't reach into Target System. Can it concern a role user?
( For more clearly: I configured the source file and the path correctly. And i used the xml file with the content and the document name correctly. In general, the Sender Adapter File don't convert the sender file and its content is same as the Payload in the "Test Configuration", i think it is all OK.)
Could anyone please help me to resolve this problem, anyone can explain this error, how can i resolve this error?
Thanks a lot in advance,
Vinh Vo

Hi Chirag,
1.I source structure is very simple as below:
<ns0:MT_MATERIAL xmlns:ns0="urn://FILE_TO_PROXY">
 <MATERIAL>
 <WERKS>1000</WERKS>
 <MATNR>MAT00001</MATNR>
 <MAKTX>Chemical Material</MAKTX>
 </MATERIAL>
</ns0:MT_MATERIAL>
2. the Communication Channel Monitoring in Runtim WorkBench\Adapter Engine is OK for my Sender File Communication Channel, it's in Blue Light.
However, i don't know what's FCC?
Thanks and best regards,
Vinh Vo

Problem in Sender File Adapter using FCC with Variable structure

Similar Messages

Maybe you are looking for