FCP Log and Transfer Crashes on new imac
Hey Guys,
I just purchased a new intel imac. I'm running FCP 6.0.6. Every time i try to open log and transfer it immediately crashes Final Cut. i already tried deleting and reinstalling FCP with no luck. I read some of the forums and tried to disable perian, no luck. it constantly crashes every time i try to open log and transfer. is there anything i can do to fix this issue? please help!
You need to use FCS Remover to completely uninstall FCS. You should never use Migration Assistant with any pro apps that call on system resources; actually you probably shouldn't use it for anything except docs and email. You will need to completely reinstall FCS from the discs.
Similar Messages
-
Mavericks and Final Cut Pro 7 - Log and Transfer crashes
Hi all. I (perhaps unintelligently) upgraded to OSX Mavericks on my Mac Pro while working on a project in Final Cut Pro 7. What is good news is that FCP 7 still works for the most part. The bad news is that Log and Transfer crashes.
I have a Panasonic P2 camera and I dump video via FireWire 800. When I first click on the Log and Transfer button, nothing happens. When I click on it again, the Log and Transfer window opens, but then FCP 7 crashes.
Is there any way to get video from my P2 card into the project without Log and Transfer?
Also, would any of these options work?
Trash preferences (working to figure out how to do that on Mavericks)
Worst case, re-format and re-install Lion (Don't have much time to do that)
Please let me know if you have a work around or a fix for this. I need to have this solved TODAY.
I appreciate your help in advance.I am having the same issue on my iMac that was udated to Mavericks a while back and apparently I haven't tried to log and transfer anything since.
The error comes up everytime I have a my Sandisk High Speed Card in my lexar Fire Wire 800 card reader. The Log and Transfer screen pops up and it starts adding the clips and instead of populating the screen, it crashes. Mine also says FCP quit while using the canonIHL plug in, here's a screen shot of the indication.
I agree, this needs to be resolved ASAP. I'm dead in the water. The only thing I can do is transfer the raw files into a folder somewhere, then import the clips, but then to have them as ProRes files I guess I would have to use compressor before hand. I've done it before, but it never runs as smoothly without it being natively imported. -
Not sure what is going on. Been using Log and Transfer for 8 months to capture video from P2 Cards in Panasonic HVX200 recorded in 720p60. Haven't had a problem before. Today, went to capture new footage (only about 15 minutes worth) and the first time I briefly saw the dialog window before FCP crashed, but since then, after restarting, closing the open files, creating a new project, making sure software was up to date, etc, it keeps crashing before even showing the window. I just get the 'spinning beachball of death' for about 5 seconds before the crash.
I also tried just transferring the files to the local drive first than running the log and transfer, but that didn't work either.
I don't have FCP tricked out with any plug-ins, with the exception of Flip for Mac, but that has been running fine for all 8 months.
Any ideas?Shane's Stock Answer #44: FCP acting weird or unusual. Just not like is normally should
If the program was working fine, and now isn't, or just isn't working the way it should, the first things to do are:
1) Trash your FCP preferences. Download the Preference Manager from Digital Rebellion: http://www.digitalrebellion.com/pref_man.htm
http://www.kenstone.net/fcphomepage/trashing_fcpprefs.html
2) Open the Disk Utility and Repair Permissions.
3) Shut down for 10 min. Go for a quick walk around the block and get SOME exercise today. Come back, turn on the computer and see how things are.
4) (optional) Do the Hokey Pokey and turn your self about. Results may vary.
Shane -
SONY XDCAM LOG and TRANSFER CRASHING FCP
I am trying to log and transfer xd cam footage. every time i open the log and transfer window, FCP crashes. What is the cleanest way to get rid of the xdcam plugin.
the error message reads:
The application Final Cut Pro quit unexpectedly after it was relaunched. The problem may have been caused by the SonyXDCAM plug-in.
I have tried to get rid of it and obviously failed because i keep getting that message which tells me it's still there.
Can someone give me a step by step on how to get rid of it?
Model Name: Mac Pro
Model Identifier: MacPro3,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 3.2 GHz
Number Of Processors: 2
Total Number Of Cores: 8
L2 Cache (per processor): 12 MB
Memory: 8 GB
Bus Speed: 1.6 GHzShane's Stock Answer #44: FCP acting weird or unusual. Just not like is normally should
If the program was working fine, and now isn't, or just isn't working the way it should, the first things to do are:
1) Trash your FCP preferences. Download the Preference Manager from Digital Rebellion: http://www.digitalrebellion.com/pref_man.htm
http://www.kenstone.net/fcphomepage/trashing_fcpprefs.html
2) Open the Disk Utility and Repair Permissions.
3) Shut down for 10 min. Go for a quick walk around the block and get SOME exercise today. Come back, turn on the computer and see how things are.
4) (optional) Do the Hokey Pokey and turn your self about. Results may vary.
Shane -
Log and Transfer Crash FCP 6.06, from Canon Vixia HF20
I am having a strange problem in logging and transferring from FCP 6.06. I have been logging and transferring from my Canon Vixia HF20 without any problems for monthes. Then I have been granted access to a Sony HXR-NX5U NXCAM from work, I logged and Transferred from the flash memory unit HXR-FMU128, without any problems. But ever since I logged and Transfered from the sony flash unit, in attempting to log an transfer from my Canon Vixia has caused FCP to crash every single time. I then log and transfer again from the Sony Flash unit without any problems, after having dealt with the Canon transfer crashes.
Currently log and transfer from Song Flash unit always works, from Canon Vixia never works in FCO 6.06.....boooOOO!
Anyone else experience a problem like this?Hi Eugene
Seems like maybe your FCP's preferences have taken a turn for the worse ... at least I haven't heard of this being a widespread issue so I would recommend you start by using a free app like Digital Rebellion's Preference Manager to make a backup copy of your current FCP user preferences, then use the same Preference Manager app to "trash" those existing prefs. Now restart FCP and see if the problem still persists .. hopefully not. If the problem is still there then you can use Preference Manager (again) to restore your previous prefs from the backup copy you made ... and you are back where you started.
Post back
Andy -
RAD Ingest FCP Log and Transfer freeze
Greetings all, I am having problems using the Log and Transfer window in Final Cut Pro 6.0.5 on the IMAC system (Imac Intel Core 2 Duo 4 G 667 MHz Ram) I'm using- basically when I open it, at first it doesn't even open, then when I try opening it again, it shows up but has RAD Ingest written at the top, and the pane is frozen. It doesn't crash FCP but I can't close the window again. I don't have FXInstaller installed, so that's not the problem. All the P2 Media is on drives- its on a RAID mirror drive (I also read this could be a problem so I moved some of the media to another Firewire drive, and took the raid drive offline but it didn't make a difference).
I've reinstalled FCP twice now, the version I had was 6.0 and then I used software upgrade to upgrade it to 6.0.5. The OS I'm installing on is 10.5.6. On a side note, on my laptop, I've got OS 10.4.9 installed and FCP 6.0.5 and Log and Transfer works fine. I'm thinking it might be an OSX version problem because this has happened on another Mac laptop that has 10.5.6 on it. Any ideas on what it could be? I'm kind of at wits end....pulling my hair out kind of deal!
Thanks for any input!!
Alexandra
Message was edited by: xandradegHi David,
I have 4GB Ram installed, and the footage is P2 Cam footage that was copied on to the hard drives during the shoot. I transferred the P2 footage with Duel Adapter, not from the camera directly. Some of it is also AVCHD footage from mini HD cam. I've been using my laptop (Macbook Pro, OS 10.4.11, 2G Ram with FCP 6.0.5 installed) to bring in footage, and Log and Transfer works fine with the same footage but doesn't work with this iMac. I was hoping to stop using my laptop so I can do everything on just the iMac. -
Log and transfer crashes when converting to 422 from avchd from sony fs700
trying to import AVChd files shot on a Sony FS700.
the files are on average one hour or more.
Need to import as 422 HQ
log and transfer sees the files but FCP 7 crashes every time
I've tried using PavTube to convert but files over 10 minutes are segmented in chunks ranging from 10 minutes to 11 minutes when the source file is long. Also the media slips out of sync over time.
I have had success with short files in FCP 7 via log and transfer but anything long results in the crash.
is this just a limitation? IS there a fix for this?
thanks
here is the crash report -
Process: Final Cut Pro [13445]
Path: /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Identifier: com.apple.FinalCutPro
Version: 7.0.3 (7.0.3)
Build Info: FCPApp-1008261348~8
Code Type: X86 (Native)
Parent Process: launchd [459]
Date/Time: 2013-07-12 16:53:44.169 -0700
OS Version: Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report: 1220259 sec
Crashes Since Last Report: 2
Per-App Interval Since Last Report: 969553 sec
Per-App Crashes Since Last Report: 2
Anonymous UUID: 05E60465-B8BC-47A2-A3DF-C5BD1E5C8ABF
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 44
Application Specific Information:
*** Terminating app due to uncaught exception 'NSMallocException', reason: '*** -[NSConcreteMutableData appendBytes:length:]: unable to allocate memory for length (22063)'
*** Call stack at first throw:
0 CoreFoundation 0x9976c6ca __raiseError + 410
1 libobjc.A.dylib 0x94a725a9 objc_exception_throw + 56
2 CoreFoundation 0x9976c3f8 +[NSException raise:format:arguments:] + 136
3 CoreFoundation 0x9976c36a +[NSException raise:format:] + 58
4 Foundation 0x95b0f169 _NSMutableDataGrowBytes + 1154
5 Foundation 0x95b0ec77 -[NSConcreteMutableData appendBytes:length:] + 75
6 AVCHD 0x6e5b0cd1 0x0 + 1851460817
7 AVCHD 0x6e5aadb3 0x0 + 1851436467
8 MIO 0x010772cb TundraPluginCallbackProc + 355
9 Tundra 0x5b574d98 TundraUnitHALInputEntry + 12756
10 Tundra 0x5b50d38d 0x0 + 1532023693
11 Tundra 0x5b5416df TundraUnitMPEG2DemuxEntry + 22037
12 Tundra 0x5b57c63a TundraUnitVDIGInputEntry + 13711
13 Tundra 0x5b591553 TundraUnitMPEG2MuxEntry + 11138
14 Tundra 0x5b50d38d 0x0 + 1532023693
15 Tundra 0x5b5416df TundraUnitMPEG2DemuxEntry + 22037
16 Tundra 0x5b57c63a TundraUnitVDIGInputEntry + 13711
17 Tundra 0x5b592fbe TundraUnitMPEG2MuxEntry + 17901
18 Tundra 0x5b50d38d 0x0 + 1532023693
19 Tundra 0x5b5416df TundraUnitMPEG2DemuxEntry + 22037
20 Tundra 0x5b57c63a TundraUnitVDIGInputEntry + 13711
21 Tundra 0x5b592fbe TundraUnitMPEG2MuxEntry + 17901
22 Tundra 0x5b50d38d 0x0 + 1532023693
23 Tundra 0x5b5416df TundraUnitMPEG2DemuxEntry + 22037
24 Tundra 0x5b57c63a TundraUnitVDIGInputEntry + 13711
25 Tundra 0x5b592fbe TundraUnitMPEG2MuxEntry + 17901
26 Tundra 0x5b50d38d 0x0 + 1532023693
27 Tundra 0x5b5416df TundraUnitMPEG2DemuxEntry + 22037
28 Tundra 0x5b57c63a TundraUnitVDIGInputEntry + 13711
29 Tundra 0x5b59f67e TundraUnitAudioOutputEntry + 18972
30 Tundra 0x5b50d38d 0x0 + 1532023693
31 Tundra 0x5b59ef2c TundraUnitAudioOutputEntry + 17098
32 Tundra 0x5b59eed2 TundraUnitAudioOutputEntry + 17008
33 Tundra 0x5b5b654d TundraUnitBFrameFileOutputEntry + 25068
34 CarbonCore 0x92fd051f CallComponentDispatch + 29
35 CoreMediaIOServicesPrivate 0x0111b5de TundraOutputUnitComponentCallRender + 49
36 CoreMediaIOServicesPrivate 0x0110080e _ZN8MIOGraph15PullOutputUnitsEbRbS0_S0_ + 348
37 CoreMediaIOServicesPrivate 0x01101548 _ZN8MIOGraph25PullAndProcessThreadEntryEv + 632
38 CoreMediaIOServicesPrivate 0x0110264f _ZN8MIOGraph21_PullAndProcessThreadEP13MIOThreadPriv + 495
39 CoreMediaIOServicesPrivate 0x0110e3a1 start_thread + 61
40 libSystem.B.dylib 0x917b8259 _pthread_start + 345
41 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 0: Dispatch queue: com.apple.main-thread
0 libSystem.B.dylib 0x9178aafa mach_msg_trap + 10
1 libSystem.B.dylib 0x9178b267 mach_msg + 68
2 com.apple.CoreFoundation 0x996d530f __CFRunLoopRun + 2079
3 com.apple.CoreFoundation 0x996d43f4 CFRunLoopRunSpecific + 452
4 com.apple.CoreFoundation 0x996d4221 CFRunLoopRunInMode + 97
5 com.apple.HIToolbox 0x920e1e04 RunCurrentEventLoopInMode + 392
6 com.apple.HIToolbox 0x920e1bb9 ReceiveNextEventCommon + 354
7 com.apple.HIToolbox 0x9226a084 _AcquireNextEvent + 54
8 com.apple.HIToolbox 0x9225fd40 RunApplicationEventLoop + 228
9 com.apple.FinalCutPro 0x001539d1 KGMainEvent(void*) + 51
10 com.apple.FinalCutPro 0x002c1278 main + 54
11 com.apple.FinalCutPro 0x00002d5b _start + 209
12 com.apple.FinalCutPro 0x00002c89 start + 41
Thread 1: Dispatch queue: com.apple.libdispatch-manager
0 libSystem.B.dylib 0x917b1382 kevent + 10
1 libSystem.B.dylib 0x917b1a9c _dispatch_mgr_invoke + 215
2 libSystem.B.dylib 0x917b0f59 _dispatch_queue_invoke + 163
3 libSystem.B.dylib 0x917b0cfe _dispatch_worker_thread2 + 240
4 libSystem.B.dylib 0x917b0781 _pthread_wqthread + 390
5 libSystem.B.dylib 0x917b05c6 start_wqthread + 30
Thread 2: com.apple.CFSocket.private
0 libSystem.B.dylib 0x917a9ac6 select$DARWIN_EXTSN + 10
1 com.apple.CoreFoundation 0x99714c83 __CFSocketManager + 1091
2 libSystem.B.dylib 0x917b8259 _pthread_start + 345
3 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 3:
0 libSystem.B.dylib 0x9178ab42 semaphore_wait_signal_trap + 10
1 libSystem.B.dylib 0x917b86f8 _pthread_cond_wait + 1089
2 libSystem.B.dylib 0x9180105f pthread_cond_wait + 48
3 com.apple.FinalCutPro 0x0043f42b Synchronizable::Wait() + 53
4 com.apple.FinalCutPro 0x0042911f DisplayQueue::Run() + 681
5 com.apple.FinalCutPro 0x0046b49a Thread::RunHelper(void*) + 20
6 libSystem.B.dylib 0x917b8259 _pthread_start + 345
7 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 4:
0 libSystem.B.dylib 0x9178ab42 semaphore_wait_signal_trap + 10
1 libSystem.B.dylib 0x917b86f8 _pthread_cond_wait + 1089
2 libSystem.B.dylib 0x9180105f pthread_cond_wait + 48
3 com.apple.FinalCutPro 0x0043f42b Synchronizable::Wait() + 53
4 com.apple.FinalCutPro 0x004e67c3 WorkUnitPerformer::Run() + 55
5 com.apple.FinalCutPro 0x0046b49a Thread::RunHelper(void*) + 20
6 libSystem.B.dylib 0x917b8259 _pthread_start + 345
7 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 5:
0 libSystem.B.dylib 0x9178ab42 semaphore_wait_signal_trap + 10
1 libSystem.B.dylib 0x917b86f8 _pthread_cond_wait + 1089
2 libSystem.B.dylib 0x9180105f pthread_cond_wait + 48
3 com.apple.FinalCutPro 0x0043f42b Synchronizable::Wait() + 53
4 com.apple.FinalCutPro 0x004e67c3 WorkUnitPerformer::Run() + 55
5 com.apple.FinalCutPro 0x0046b49a Thread::RunHelper(void*) + 20
6 libSystem.B.dylib 0x917b8259 _pthread_start + 345
7 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 6:
0 libSystem.B.dylib 0x9178ab42 semaphore_wait_signal_trap + 10
1 libSystem.B.dylib 0x917b86f8 _pthread_cond_wait + 1089
2 libSystem.B.dylib 0x9180105f pthread_cond_wait + 48
3 com.apple.FinalCutPro 0x0043f42b Synchronizable::Wait() + 53
4 com.apple.FinalCutPro 0x004e67c3 WorkUnitPerformer::Run() + 55
5 com.apple.FinalCutPro 0x0046b49a Thread::RunHelper(void*) + 20
6 libSystem.B.dylib 0x917b8259 _pthread_start + 345
7 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 7:
0 libSystem.B.dylib 0x9178ab42 semaphore_wait_signal_trap + 10
1 libSystem.B.dylib 0x917b86f8 _pthread_cond_wait + 1089
2 libSystem.B.dylib 0x9180105f pthread_cond_wait + 48
3 com.apple.FinalCutPro 0x0043f42b Synchronizable::Wait() + 53
4 com.apple.FinalCutPro 0x004e67c3 WorkUnitPerformer::Run() + 55
5 com.apple.FinalCutPro 0x0046b49a Thread::RunHelper(void*) + 20
6 libSystem.B.dylib 0x917b8259 _pthread_start + 345
7 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 8:
0 libSystem.B.dylib 0x9178ab42 semaphore_wait_signal_trap + 10
1 libSystem.B.dylib 0x917b86f8 _pthread_cond_wait + 1089
2 libSystem.B.dylib 0x9180105f pthread_cond_wait + 48
3 com.apple.FinalCutPro 0x0043f42b Synchronizable::Wait() + 53
4 com.apple.FinalCutPro 0x004e67c3 WorkUnitPerformer::Run() + 55
5 com.apple.FinalCutPro 0x0046b49a Thread::RunHelper(void*) + 20
6 libSystem.B.dylib 0x917b8259 _pthread_start + 345
7 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 9:
0 libSystem.B.dylib 0x9178ab42 semaphore_wait_signal_trap + 10
1 libSystem.B.dylib 0x917b86f8 _pthread_cond_wait + 1089
2 libSystem.B.dylib 0x9180105f pthread_cond_wait + 48
3 com.apple.FinalCutPro 0x0043f42b Synchronizable::Wait() + 53
4 com.apple.FinalCutPro 0x004e67c3 WorkUnitPerformer::Run() + 55
5 com.apple.FinalCutPro 0x0046b49a Thread::RunHelper(void*) + 20
6 libSystem.B.dylib 0x917b8259 _pthread_start + 345
7 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 10:
0 libSystem.B.dylib 0x9178ab42 semaphore_wait_signal_trap + 10
1 libSystem.B.dylib 0x917b86f8 _pthread_cond_wait + 1089
2 libSystem.B.dylib 0x9180105f pthread_cond_wait + 48
3 com.apple.FinalCutPro 0x0043f42b Synchronizable::Wait() + 53
4 com.apple.FinalCutPro 0x004e67c3 WorkUnitPerformer::Run() + 55
5 com.apple.FinalCutPro 0x0046b49a Thread::RunHelper(void*) + 20
6 libSystem.B.dylib 0x917b8259 _pthread_start + 345
7 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 11:
0 libSystem.B.dylib 0x9178ab42 semaphore_wait_signal_trap + 10
1 libSystem.B.dylib 0x917b86f8 _pthread_cond_wait + 1089
2 libSystem.B.dylib 0x9180105f pthread_cond_wait + 48
3 com.apple.FinalCutPro 0x0043f42b Synchronizable::Wait() + 53
4 com.apple.FinalCutPro 0x004e67c3 WorkUnitPerformer::Run() + 55
5 com.apple.FinalCutPro 0x0046b49a Thread::RunHelper(void*) + 20
6 libSystem.B.dylib 0x917b8259 _pthread_start + 345
7 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 12:
0 libSystem.B.dylib 0x9178ab42 semaphore_wait_signal_trap + 10
1 libSystem.B.dylib 0x917b86f8 _pthread_cond_wait + 1089
2 libSystem.B.dylib 0x9180105f pthread_cond_wait + 48
3 com.apple.FinalCutPro 0x0043f42b Synchronizable::Wait() + 53
4 com.apple.FinalCutPro 0x004e67c3 WorkUnitPerformer::Run() + 55
5 com.apple.FinalCutPro 0x0046b49a Thread::RunHelper(void*) + 20
6 libSystem.B.dylib 0x917b8259 _pthread_start + 345
7 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 13:
0 libSystem.B.dylib 0x9178ab42 semaphore_wait_signal_trap + 10
1 libSystem.B.dylib 0x917b86f8 _pthread_cond_wait + 1089
2 libSystem.B.dylib 0x9180105f pthread_cond_wait + 48
3 com.apple.FinalCutPro 0x0043f42b Synchronizable::Wait() + 53
4 com.apple.FinalCutPro 0x004e67c3 WorkUnitPerformer::Run() + 55
5 com.apple.FinalCutPro 0x0046b49a Thread::RunHelper(void*) + 20
6 libSystem.B.dylib 0x917b8259 _pthread_start + 345
7 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 14:
0 libSystem.B.dylib 0x9178ab42 semaphore_wait_signal_trap + 10
1 libSystem.B.dylib 0x917b86f8 _pthread_cond_wait + 1089
2 libSystem.B.dylib 0x9180105f pthread_cond_wait + 48
3 com.apple.FinalCutPro 0x0043f42b Synchronizable::Wait() + 53
4 com.apple.FinalCutPro 0x004e67c3 WorkUnitPerformer::Run() + 55
5 com.apple.FinalCutPro 0x0046b49a Thread::RunHelper(void*) + 20
6 libSystem.B.dylib 0x917b8259 _pthread_start + 345
7 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 15:
0 libSystem.B.dylib 0x9178aafa mach_msg_trap + 10
1 libSystem.B.dylib 0x9178b267 mach_msg + 68
2 com.apple.CoreFoundation 0x996d530f __CFRunLoopRun + 2079
3 com.apple.CoreFoundation 0x996d43f4 CFRunLoopRunSpecific + 452
4 com.apple.CoreFoundation 0x996da334 CFRunLoopRun + 84
5 com.apple.DVCPROHDMuxer 0x3898d98f AVS::DestroyAVCDeviceController(AVS::AVCDeviceController*) + 317
6 libSystem.B.dylib 0x917b8259 _pthread_start + 345
7 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 16:
0 libSystem.B.dylib 0x9178aafa mach_msg_trap + 10
1 libSystem.B.dylib 0x9178b267 mach_msg + 68
2 com.apple.CoreFoundation 0x996d530f __CFRunLoopRun + 2079
3 com.apple.CoreFoundation 0x996d43f4 CFRunLoopRunSpecific + 452
4 com.apple.CoreFoundation 0x996d4221 CFRunLoopRunInMode + 97
5 ....CoreMediaIOServicesPrivate 0x010fc9ab MIO::DAL::RunLoop::OwnThread(void*) + 157
6 ....CoreMediaIOServicesPrivate 0x010fe81c CAPThread::Entry(CAPThread*) + 96
7 libSystem.B.dylib 0x917b8259 _pthread_start + 345
8 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 17:
0 libSystem.B.dylib 0x9178aafa mach_msg_trap + 10
1 libSystem.B.dylib 0x9178b267 mach_msg + 68
2 com.apple.CoreFoundation 0x996d530f __CFRunLoopRun + 2079
3 com.apple.CoreFoundation 0x996d43f4 CFRunLoopRunSpecific + 452
4 com.apple.CoreFoundation 0x996da334 CFRunLoopRun + 84
5 com.apple.qmaster.do 0x51e8b460 swamp::CRAdReceiver2::ReceivingThread::runOnce() + 234
6 com.apple.AECore 0x426a6022 aecore::CThread::runThread() + 34
7 com.apple.AECore 0x426a3fb9 threadProc(void*) + 17
8 libSystem.B.dylib 0x917b8259 _pthread_start + 345
9 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 18:
0 libSystem.B.dylib 0x917a9ac6 select$DARWIN_EXTSN + 10
1 com.apple.AECore 0x426a6067 aecore::CThread::runThread() + 103
2 com.apple.AECore 0x426a3fb9 threadProc(void*) + 17
3 libSystem.B.dylib 0x917b8259 _pthread_start + 345
4 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 19:
0 libSystem.B.dylib 0x9178ab5a semaphore_timedwait_signal_trap + 10
1 libSystem.B.dylib 0x917b86e1 _pthread_cond_wait + 1066
2 libSystem.B.dylib 0x917e75a8 pthread_cond_timedwait_relative_np + 47
3 ...ple.CoreServices.CarbonCore 0x92fafb90 TSWaitOnConditionTimedRelative + 242
4 ...ple.CoreServices.CarbonCore 0x92faf8ce TSWaitOnSemaphoreCommon + 511
5 ...ickTimeComponents.component 0x93f58e35 ReadSchedulerThreadEntryPoint + 4698
6 libSystem.B.dylib 0x917b8259 _pthread_start + 345
7 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 20:
0 libSystem.B.dylib 0x9178ab36 semaphore_wait_trap + 10
1 com.apple.TundraComponent 0x5b5e4aaa TundraUnitVideoSynchronizerEntry + 28798
2 com.apple.TundraComponent 0x5b5b98a8 TundraUnitNativeFileOutputEntry + 9152
3 com.apple.TundraComponent 0x5b5b9cd6 TundraUnitNativeFileOutputEntry + 10222
4 com.apple.TundraComponent 0x5b5e490f TundraUnitVideoSynchronizerEntry + 28387
5 libSystem.B.dylib 0x917b8259 _pthread_start + 345
6 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 21:
0 libSystem.B.dylib 0x9178ab36 semaphore_wait_trap + 10
1 com.apple.AVCHDPlugin 0x6e60a788 0x6e5a0000 + 436104
2 com.apple.AVCHDPlugin 0x6e688156 0x6e5a0000 + 950614
3 com.apple.AVCHDPlugin 0x6e60ac11 0x6e5a0000 + 437265
4 libSystem.B.dylib 0x91880a6a _pthread_body + 27
Thread 22:
0 libSystem.B.dylib 0x9178ab42 semaphore_wait_signal_trap + 10
1 libSystem.B.dylib 0x917b86f8 _pthread_cond_wait + 1089
2 libSystem.B.dylib 0x9180105f pthread_cond_wait + 48
3 com.apple.AVCHDPlugin 0x6e76074f 0x6e5a0000 + 1836879
4 com.apple.AVCHDPlugin 0x6e78dd2a 0x6e5a0000 + 2022698
5 com.apple.AVCHDPlugin 0x6e7603ee 0x6e5a0000 + 1836014
6 com.apple.AVCHDPlugin 0x6e60ac11 0x6e5a0000 + 437265
7 libSystem.B.dylib 0x91880a6a _pthread_body + 27
Thread 23:
0 libSystem.B.dylib 0x9178ab36 semaphore_wait_trap + 10
1 com.apple.AVCHDPlugin 0x6e60a788 0x6e5a0000 + 436104
2 com.apple.AVCHDPlugin 0x6e688156 0x6e5a0000 + 950614
3 com.apple.AVCHDPlugin 0x6e60d238 0x6e5a0000 + 447032
4 com.apple.AVCHDPlugin 0x6e60ac11 0x6e5a0000 + 437265
5 libSystem.B.dylib 0x91880a6a _pthread_body + 27
Thread 24:
0 libSystem.B.dylib 0x9178aafa mach_msg_trap + 10
1 libSystem.B.dylib 0x9178b267 mach_msg + 68
2 com.apple.CoreFoundation 0x996d530f __CFRunLoopRun + 2079
3 com.apple.CoreFoundation 0x996d43f4 CFRunLoopRunSpecific + 452
4 com.apple.CoreFoundation 0x996da334 CFRunLoopRun + 84
5 com.apple.DiscRecording 0x91244dcf DRWorkLoop::WorkLoop() + 271
6 com.apple.DiscRecording 0x91244cad DRWorkLoop::WorkLoopEntry(DRWorkLoop*) + 17
7 com.apple.DiscRecording 0x91244a19 DRThreadObject::StartRoutine(DRThreadObject*) + 151
8 libSystem.B.dylib 0x917b8259 _pthread_start + 345
9 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 25:
0 libSystem.B.dylib 0x9178ab5a semaphore_timedwait_signal_trap + 10
1 libSystem.B.dylib 0x917b86e1 _pthread_cond_wait + 1066
2 libSystem.B.dylib 0x917e75a8 pthread_cond_timedwait_relative_np + 47
3 com.apple.Foundation 0x95b3195c -[NSCondition waitUntilDate:] + 453
4 com.apple.Foundation 0x95aea451 -[NSConditionLock lockWhenCondition:beforeDate:] + 279
5 com.apple.Foundation 0x95aea334 -[NSConditionLock lockWhenCondition:] + 69
6 com.apple.proapps.MIO 0x01066043 -[PluginLockPair scanPaths] + 729
7 com.apple.Foundation 0x95af5564 -[NSThread main] + 45
8 com.apple.Foundation 0x95af5514 __NSThread__main__ + 1499
9 libSystem.B.dylib 0x917b8259 _pthread_start + 345
10 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 26:
0 libSystem.B.dylib 0x9178ab5a semaphore_timedwait_signal_trap + 10
1 libSystem.B.dylib 0x917b86e1 _pthread_cond_wait + 1066
2 libSystem.B.dylib 0x917e75a8 pthread_cond_timedwait_relative_np + 47
3 com.apple.Foundation 0x95b3195c -[NSCondition waitUntilDate:] + 453
4 com.apple.Foundation 0x95aea451 -[NSConditionLock lockWhenCondition:beforeDate:] + 279
5 com.apple.Foundation 0x95aea334 -[NSConditionLock lockWhenCondition:] + 69
6 com.apple.proapps.MIO 0x01066043 -[PluginLockPair scanPaths] + 729
7 com.apple.Foundation 0x95af5564 -[NSThread main] + 45
8 com.apple.Foundation 0x95af5514 __NSThread__main__ + 1499
9 libSystem.B.dylib 0x917b8259 _pthread_start + 345
10 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 27:
0 libSystem.B.dylib 0x9178ab5a semaphore_timedwait_signal_trap + 10
1 libSystem.B.dylib 0x917b86e1 _pthread_cond_wait + 1066
2 libSystem.B.dylib 0x917e75a8 pthread_cond_timedwait_relative_np + 47
3 com.apple.Foundation 0x95b3195c -[NSCondition waitUntilDate:] + 453
4 com.apple.Foundation 0x95aea451 -[NSConditionLock lockWhenCondition:beforeDate:] + 279
5 com.apple.Foundation 0x95aea334 -[NSConditionLock lockWhenCondition:] + 69
6 com.apple.proapps.MIO 0x01066043 -[PluginLockPair scanPaths] + 729
7 com.apple.Foundation 0x95af5564 -[NSThread main] + 45
8 com.apple.Foundation 0x95af5514 __NSThread__main__ + 1499
9 libSystem.B.dylib 0x917b8259 _pthread_start + 345
10 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 28:
0 libSystem.B.dylib 0x9178ab5a semaphore_timedwait_signal_trap + 10
1 libSystem.B.dylib 0x917b86e1 _pthread_cond_wait + 1066
2 libSystem.B.dylib 0x917e75a8 pthread_cond_timedwait_relative_np + 47
3 com.apple.Foundation 0x95b3195c -[NSCondition waitUntilDate:] + 453
4 com.apple.Foundation 0x95aea451 -[NSConditionLock lockWhenCondition:beforeDate:] + 279
5 com.apple.Foundation 0x95aea334 -[NSConditionLock lockWhenCondition:] + 69
6 com.apple.proapps.MIO 0x01066043 -[PluginLockPair scanPaths] + 729
7 com.apple.Foundation 0x95af5564 -[NSThread main] + 45
8 com.apple.Foundation 0x95af5514 __NSThread__main__ + 1499
9 libSystem.B.dylib 0x917b8259 _pthread_start + 345
10 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 29:
0 libSystem.B.dylib 0x9178ab5a semaphore_timedwait_signal_trap + 10
1 libSystem.B.dylib 0x917b86e1 _pthread_cond_wait + 1066
2 libSystem.B.dylib 0x917e75a8 pthread_cond_timedwait_relative_np + 47
3 com.apple.Foundation 0x95b3195c -[NSCondition waitUntilDate:] + 453
4 com.apple.Foundation 0x95aea451 -[NSConditionLock lockWhenCondition:beforeDate:] + 279
5 com.apple.Foundation 0x95aea334 -[NSConditionLock lockWhenCondition:] + 69
6 com.apple.proapps.MIO 0x01066043 -[PluginLockPair scanPaths] + 729
7 com.apple.Foundation 0x95af5564 -[NSThread main] + 45
8 com.apple.Foundation 0x95af5514 __NSThread__main__ + 1499
9 libSystem.B.dylib 0x917b8259 _pthread_start + 345
10 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 30:
0 libSystem.B.dylib 0x917b8aa2 __semwait_signal + 10
1 libSystem.B.dylib 0x917b875e _pthread_cond_wait + 1191
2 libSystem.B.dylib 0x917ba3f8 pthread_cond_wait$UNIX2003 + 73
3 com.apple.vImage 0x979736ec vImageQueue_DequeueJob + 44
4 com.apple.vImage 0x979737ec vImageWorkerThreadFunc + 124
5 libSystem.B.dylib 0x917b8259 _pthread_start + 345
6 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 31:
0 libSystem.B.dylib 0x917b8aa2 __semwait_signal + 10
1 libSystem.B.dylib 0x917b875e _pthread_cond_wait + 1191
2 libSystem.B.dylib 0x917ba3f8 pthread_cond_wait$UNIX2003 + 73
3 com.apple.vImage 0x979736ec vImageQueue_DequeueJob + 44
4 com.apple.vImage 0x979737ec vImageWorkerThreadFunc + 124
5 libSystem.B.dylib 0x917b8259 _pthread_start + 345
6 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 32:
0 libSystem.B.dylib 0x917b8aa2 __semwait_signal + 10
1 libSystem.B.dylib 0x917b875e _pthread_cond_wait + 1191
2 libSystem.B.dylib 0x917ba3f8 pthread_cond_wait$UNIX2003 + 73
3 com.apple.vImage 0x979736ec vImageQueue_DequeueJob + 44
4 com.apple.vImage 0x979737ec vImageWorkerThreadFunc + 124
5 libSystem.B.dylib 0x917b8259 _pthread_start + 345
6 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 33:
0 libSystem.B.dylib 0x917b8aa2 __semwait_signal + 10
1 libSystem.B.dylib 0x917b875e _pthread_cond_wait + 1191
2 libSystem.B.dylib 0x917ba3f8 pthread_cond_wait$UNIX2003 + 73
3 com.apple.vImage 0x979736ec vImageQueue_DequeueJob + 44
4 com.apple.vImage 0x979737ec vImageWorkerThreadFunc + 124
5 libSystem.B.dylib 0x917b8259 _pthread_start + 345
6 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 34:
0 libSystem.B.dylib 0x917b8aa2 __semwait_signal + 10
1 libSystem.B.dylib 0x917b875e _pthread_cond_wait + 1191
2 libSystem.B.dylib 0x917ba3f8 pthread_cond_wait$UNIX2003 + 73
3 com.apple.vImage 0x979736ec vImageQueue_DequeueJob + 44
4 com.apple.vImage 0x979737ec vImageWorkerThreadFunc + 124
5 libSystem.B.dylib 0x917b8259 _pthread_start + 345
6 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 35:
0 libSystem.B.dylib 0x917b8aa2 __semwait_signal + 10
1 libSystem.B.dylib 0x917b875e _pthread_cond_wait + 1191
2 libSystem.B.dylib 0x917ba3f8 pthread_cond_wait$UNIX2003 + 73
3 com.apple.vImage 0x979736ec vImageQueue_DequeueJob + 44
4 com.apple.vImage 0x979737ec vImageWorkerThreadFunc + 124
5 libSystem.B.dylib 0x917b8259 _pthread_start + 345
6 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 36:
0 libSystem.B.dylib 0x917b8aa2 __semwait_signal + 10
1 libSystem.B.dylib 0x917b875e _pthread_cond_wait + 1191
2 libSystem.B.dylib 0x917ba3f8 pthread_cond_wait$UNIX2003 + 73
3 com.apple.vImage 0x979736ec vImageQueue_DequeueJob + 44
4 com.apple.vImage 0x979737ec vImageWorkerThreadFunc + 124
5 libSystem.B.dylib 0x917b8259 _pthread_start + 345
6 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 37:
0 libSystem.B.dylib 0x917b8aa2 __semwait_signal + 10
1 libSystem.B.dylib 0x917b875e _pthread_cond_wait + 1191
2 libSystem.B.dylib 0x917ba3f8 pthread_cond_wait$UNIX2003 + 73
3 com.apple.vImage 0x979736ec vImageQueue_DequeueJob + 44
4 com.apple.vImage 0x979737ec vImageWorkerThreadFunc + 124
5 libSystem.B.dylib 0x917b8259 _pthread_start + 345
6 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 38:
0 libSystem.B.dylib 0x917b8aa2 __semwait_signal + 10
1 libSystem.B.dylib 0x917b875e _pthread_cond_wait + 1191
2 libSystem.B.dylib 0x917ba3f8 pthread_cond_wait$UNIX2003 + 73
3 com.apple.vImage 0x979736ec vImageQueue_DequeueJob + 44
4 com.apple.vImage 0x979737ec vImageWorkerThreadFunc + 124
5 libSystem.B.dylib 0x917b8259 _pthread_start + 345
6 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 39:
0 libSystem.B.dylib 0x917b8aa2 __semwait_signal + 10
1 libSystem.B.dylib 0x917b875e _pthread_cond_wait + 1191
2 libSystem.B.dylib 0x917ba3f8 pthread_cond_wait$UNIX2003 + 73
3 com.apple.vImage 0x979736ec vImageQueue_DequeueJob + 44
4 com.apple.vImage 0x979737ec vImageWorkerThreadFunc + 124
5 libSystem.B.dylib 0x917b8259 _pthread_start + 345
6 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 40:
0 libSystem.B.dylib 0x917b8aa2 __semwait_signal + 10
1 libSystem.B.dylib 0x917b875e _pthread_cond_wait + 1191
2 libSystem.B.dylib 0x917ba3f8 pthread_cond_wait$UNIX2003 + 73
3 com.apple.vImage 0x979736ec vImageQueue_DequeueJob + 44
4 com.apple.vImage 0x979737ec vImageWorkerThreadFunc + 124
5 libSystem.B.dylib 0x917b8259 _pthread_start + 345
6 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 41:
0 libSystem.B.dylib 0x9178ab36 semaphore_wait_trap + 10
1 com.apple.AVCHDPlugin 0x6e60a788 0x6e5a0000 + 436104
2 com.apple.AVCHDPlugin 0x6e688156 0x6e5a0000 + 950614
3 com.apple.AVCHDPlugin 0x6e60ac11 0x6e5a0000 + 437265
4 libSystem.B.dylib 0x91880a6a _pthread_body + 27
Thread 42:
0 libSystem.B.dylib 0x917b8aa2 __semwait_signal + 10
1 libSystem.B.dylib 0x917b875e _pthread_cond_wait + 1191
2 libSystem.B.dylib 0x917ba3f8 pthread_cond_wait$UNIX2003 + 73
3 com.apple.AVCHDPlugin 0x6ebdb708 0x6e5a0000 + 6534920
4 com.apple.AVCHDPlugin 0x6ebdd924 0x6e5a0000 + 6543652
5 libSystem.B.dylib 0x917b8259 _pthread_start + 345
6 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 43:
0 libSystem.B.dylib 0x9178ab36 semaphore_wait_trap + 10
1 com.apple.TundraComponent 0x5b5e4aaa TundraUnitVideoSynchronizerEntry + 28798
2 com.apple.TundraComponent 0x5b54acee TundraUnitMPEG2DemuxEntry + 60452
3 com.apple.TundraComponent 0x5b5e490f TundraUnitVideoSynchronizerEntry + 28387
4 libSystem.B.dylib 0x917b8259 _pthread_start + 345
5 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 44 Crashed:
0 com.apple.CoreFoundation 0x997b7a37 ___TERMINATING_DUE_TO_UNCAUGHT_EXCEPTION___ + 7
1 libobjc.A.dylib 0x94a725a9 objc_exception_throw + 56
2 com.apple.CoreFoundation 0x9976c3f8 +[NSException raise:format:arguments:] + 136
3 com.apple.CoreFoundation 0x9976c36a +[NSException raise:format:] + 58
4 com.apple.Foundation 0x95b0f169 _NSMutableDataGrowBytes + 1154
5 com.apple.Foundation 0x95b0ec77 -[NSConcreteMutableData appendBytes:length:] + 75
6 com.apple.AVCHDPlugin 0x6e5b0cd1 0x6e5a0000 + 68817
7 com.apple.AVCHDPlugin 0x6e5aadb3 0x6e5a0000 + 44467
8 com.apple.proapps.MIO 0x010772cb TundraPluginCallbackProc + 355
9 com.apple.TundraComponent 0x5b574d98 TundraUnitHALInputEntry + 12756
10 com.apple.TundraComponent 0x5b50d38d 0x5b500000 + 54157
11 com.apple.TundraComponent 0x5b5416df TundraUnitMPEG2DemuxEntry + 22037
12 com.apple.TundraComponent 0x5b57c63a TundraUnitVDIGInputEntry + 13711
13 com.apple.TundraComponent 0x5b591553 TundraUnitMPEG2MuxEntry + 11138
14 com.apple.TundraComponent 0x5b50d38d 0x5b500000 + 54157
15 com.apple.TundraComponent 0x5b5416df TundraUnitMPEG2DemuxEntry + 22037
16 com.apple.TundraComponent 0x5b57c63a TundraUnitVDIGInputEntry + 13711
17 com.apple.TundraComponent 0x5b592fbe TundraUnitMPEG2MuxEntry + 17901
18 com.apple.TundraComponent 0x5b50d38d 0x5b500000 + 54157
19 com.apple.TundraComponent 0x5b5416df TundraUnitMPEG2DemuxEntry + 22037
20 com.apple.TundraComponent 0x5b57c63a TundraUnitVDIGInputEntry + 13711
21 com.apple.TundraComponent 0x5b592fbe TundraUnitMPEG2MuxEntry + 17901
22 com.apple.TundraComponent 0x5b50d38d 0x5b500000 + 54157
23 com.apple.TundraComponent 0x5b5416df TundraUnitMPEG2DemuxEntry + 22037
24 com.apple.TundraComponent 0x5b57c63a TundraUnitVDIGInputEntry + 13711
25 com.apple.TundraComponent 0x5b592fbe TundraUnitMPEG2MuxEntry + 17901
26 com.apple.TundraComponent 0x5b50d38d 0x5b500000 + 54157
27 com.apple.TundraComponent 0x5b5416df TundraUnitMPEG2DemuxEntry + 22037
28 com.apple.TundraComponent 0x5b57c63a TundraUnitVDIGInputEntry + 13711
29 com.apple.TundraComponent 0x5b59f67e TundraUnitAudioOutputEntry + 18972
30 com.apple.TundraComponent 0x5b50d38d 0x5b500000 + 54157
31 com.apple.TundraComponent 0x5b59ef2c TundraUnitAudioOutputEntry + 17098
32 com.apple.TundraComponent 0x5b59eed2 TundraUnitAudioOutputEntry + 17008
33 com.apple.TundraComponent 0x5b5b654d TundraUnitBFrameFileOutputEntry + 25068
34 ...ple.CoreServices.CarbonCore 0x92fd051f CallComponentDispatch + 29
35 ....CoreMediaIOServicesPrivate 0x0111b5de TundraOutputUnitComponentCallRender + 49
36 ....CoreMediaIOServicesPrivate 0x0110080e MIOGraph::PullOutputUnits(bool, bool&, bool&, bool&) + 348
37 ....CoreMediaIOServicesPrivate 0x01101548 MIOGraph::PullAndProcessThreadEntry() + 632
38 ....CoreMediaIOServicesPrivate 0x0110264f MIOGraph::_PullAndProcessThread(MIOThreadPriv*) + 495
39 ....CoreMediaIOServicesPrivate 0x0110e3a1 start_thread + 61
40 libSystem.B.dylib 0x917b8259 _pthread_start + 345
41 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 45:
0 libSystem.B.dylib 0x9178ab36 semaphore_wait_trap + 10
1 com.apple.TundraComponent 0x5b5e4aaa TundraUnitVideoSynchronizerEntry + 28798
2 com.apple.TundraComponent 0x5b5a928e TundraUnitAudioFileOutputEntry + 18915
3 com.apple.TundraComponent 0x5b5a9929 TundraUnitAudioFileOutputEntry + 20606
4 com.apple.TundraComponent 0x5b5e490f TundraUnitVideoSynchronizerEntry + 28387
5 libSystem.B.dylib 0x917b8259 _pthread_start + 345
6 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 46:
0 libSystem.B.dylib 0x9178ab36 semaphore_wait_trap + 10
1 com.apple.TundraComponent 0x5b5e4aaa TundraUnitVideoSynchronizerEntry + 28798
2 com.apple.TundraComponent 0x5b51a74d TundraUnitVideoCompressorEntry + 22204
3 com.apple.TundraComponent 0x5b51b156 TundraUnitVideoCompressorEntry + 24773
4 com.apple.TundraComponent 0x5b5e490f TundraUnitVideoSynchronizerEntry + 28387
5 libSystem.B.dylib 0x917b8259 _pthread_start + 345
6 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 47:
0 libSystem.B.dylib 0x9178ab36 semaphore_wait_trap + 10
1 QuickTimeH264.scalar 0x372fd1eb JVTCompEncodeFrame + 3038234
2 QuickTimeH264.scalar 0x3733db8f JVTCompEncodeFrame + 3302846
3 libSystem.B.dylib 0x917b8259 _pthread_start + 345
4 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 48:
0 libSystem.B.dylib 0x9178ab36 semaphore_wait_trap + 10
1 QuickTimeH264.scalar 0x372fd1eb JVTCompEncodeFrame + 3038234
2 QuickTimeH264.scalar 0x3733db8f JVTCompEncodeFrame + 3302846
3 libSystem.B.dylib 0x917b8259 _pthread_start + 345
4 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 49:
0 QuickTimeH264.scalar 0x371e3e13 JVTCompEncodeFrame + 1886274
1 QuickTimeH264.scalar 0x3724d187 JVTCompEncodeFrame + 2317238
2 QuickTimeH264.scalar 0x37320b01 JVTCompEncodeFrame + 3183920
3 QuickTimeH264.scalar 0x3733e129 JVTCompEncodeFrame + 3304280
Thread 50:
0 libSystem.B.dylib 0x9178ab36 semaphore_wait_trap + 10
1 QuickTimeH264.scalar 0x372fd1eb JVTCompEncodeFrame + 3038234
2 QuickTimeH264.scalar 0x3733db8f JVTCompEncodeFrame + 3302846
3 libSystem.B.dylib 0x917b8259 _pthread_start + 345
4 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 51:
0 libSystem.B.dylib 0x9178ab36 semaphore_wait_trap + 10
1 QuickTimeH264.scalar 0x372fd1eb JVTCompEncodeFrame + 3038234
2 QuickTimeH264.scalar 0x3733db8f JVTCompEncodeFrame + 3302846
3 libSystem.B.dylib 0x917b8259 _pthread_start + 345
4 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 52:
0 libSystem.B.dylib 0x9178ab36 semaphore_wait_trap + 10
1 QuickTimeH264.scalar 0x372fd1eb JVTCompEncodeFrame + 3038234
2 QuickTimeH264.scalar 0x3733db8f JVTCompEncodeFrame + 3302846
3 libSystem.B.dylib 0x917b8259 _pthread_start + 345
4 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 53:
0 libSystem.B.dylib 0x9178ab36 semaphore_wait_trap + 10
1 QuickTimeH264.scalar 0x372fd1eb JVTCompEncodeFrame + 3038234
2 QuickTimeH264.scalar 0x3733db8f JVTCompEncodeFrame + 3302846
3 libSystem.B.dylib 0x917b8259 _pthread_start + 345
4 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 54:
0 libSystem.B.dylib 0x9178ab36 semaphore_wait_trap + 10
1 QuickTimeH264.scalar 0x372fd1eb JVTCompEncodeFrame + 3038234
2 QuickTimeH264.scalar 0x3733db8f JVTCompEncodeFrame + 3302846
3 libSystem.B.dylib 0x917b8259 _pthread_start + 345
4 libSystem.B.dylib 0x917b80de thread_start + 34
Thread 55:
0 libSystem.B.dylib 0x9178ab36 semaphore_wait_trap + 10
1 QuickTimeH264.scalar 0x372fd1eb JVTCompEncodeFrame + 3038234
2 QuickTimeH264.scalarhttp://mac-video-compatibility.over-blog.com/sony-nex-fs700-60p-avchd-importing- workflow-in-final-cut-pro-x-7-6
seems like some formats that the camera shoots are not compatible. Not sure if this applies to your footage, but you might want to try clipwrap to do the conversion.
http://www.divergentmedia.com/clipwrap
It's not very expensive and there's a free trial to test the workflow.
Don't think there are any updates for fcp that will help this, but you might try doing a software update and see if there's anything that looks likely. -
Prokit 7 makes Log and Transfer Crash
I've stayed on Prokit 5.1 for a while now, since it does not create any problems, but I recently tried to upgrade to 7. FCP opens, but when opening log and transfer, it crashes again. I have downgraded back to 5.1 for now, but then I can't use aperture. Anyone else facing this problem and have a workaround?
Hi Eugene
Seems like maybe your FCP's preferences have taken a turn for the worse ... at least I haven't heard of this being a widespread issue so I would recommend you start by using a free app like Digital Rebellion's Preference Manager to make a backup copy of your current FCP user preferences, then use the same Preference Manager app to "trash" those existing prefs. Now restart FCP and see if the problem still persists .. hopefully not. If the problem is still there then you can use Preference Manager (again) to restore your previous prefs from the backup copy you made ... and you are back where you started.
Post back
Andy -
Cursor jumping to end of clip in FCP log and transfer
I'm using AVCHD footage from a Sony hxr-nx5u camera. I copied the clips to a hard drive and am now using log and transfer to get the clips into FCP. My problem is that on some of the longer clips (pieces over about 10 min) the cursor start to jump or snap to the end.
Example, through the first part of the clip I can drag the viewing cursor back and forth along the clip's timeline. When I let go, it stays there. If I do the same thing in the second half or later of the clip, when I let go the cursor jumps to the end of the entire clip every time. I can't log or mark in and out points for the second half of the clip unless I just let it play though. (If I do let it play through, I still can't go back and adjust it)
I'm using Final Cut 7 and think it's fully updated.
Very frustrating to say the least. Can anyone provide any help on this?Hi -
No first hand experience at this, but my understanding is there is currently a problem importing clips from that camera that are over 10-15 minutes.
See this thread for a possible workarounds/solutions:
http://discussions.apple.com/thread.jspa?messageID=11446024�
Not sure this will help you but might get you started in the right direction.
MTD -
FCP Log and Transfer Bug(s)
FCP 7 doesn't seem to like XDCAM EX very well.
After installing the Sony plugin.
Any attempt to FF through footage produces the opposite - Reverse.
I am also currently unable to clear the Transfer browser of mounted clips/volumes.
Repairing permissions did nothing.
Are we looking at trashing FCP prefs ...?
Never had to do that with 7.0.3.https://discussions.apple.com/docs/DOC-2491
Are you using the keyboard or the controls on the log and transfer window? If you're using the keyboard, do they perform properly with captured clips? -
FCP "Log and Transfer" ignores some MTS files
Good afternoon!
FCP's "Log and Transfer" will only pick up about 50% of the MTS files recorded on my Canon HF-10. Toast 9 can see them all, but of course the QuickTime conversion puts them a bit out of sync.
I've just spend rather a lot of cash on FCS2 for the Log and Transfer option. Does anyone know why only some of my MTS files are showing up?
Many thanks!
DANMy guess is because you are on a G5, not an Intel Mac
If those files are AVCHD, you need an Intel Mac and at least 6.0.5. -
FCP Log and Transfer not Recognizing .MTS
This is weird. Two weeks ago I received a bunch of MTS files and brought them into FCP 6.0.6 with Log and Transfer. Today I received a bunch more and opened FCP to log and transfer the files and now FCP won't recognize them I haven't changed anything to my knowledge. Any more troubleshooting ideas? I have clipwrap and that works but I have an outdated version and I guess upgrades aren't free so I only have the free trial version. Anyways, log and transfer worked great and now this problem!?
Thanks in advance!
TimFCP can recognize MTS video files as long as you have the whole file structure.
AVCHD->BDAV->Stream and something like that.
If you indeed just have single MTS video file, you have to use a MTS Converting software.
Hope my info helps. -
Im using the Log and Transfer for my Sony Z7U and upgraded to FCP7, downloaded Sonys FCP7 drivers for Log and Transfer and now it starts to load the drivers and then crashes so far every time.
I rebooted the computer to see if it helps but, so far no success.
What am I doing wrong?You mentioned you are using Log and Transfer to capture the files from the HVR MRU as Apple Pro Res LT. I only see that option when working at 24FPS. I have the Z5U with the same HVR MRU1 Flash recorder and I love it, accept that I cannot use Log and Transfer to capture as Apple Pro Res when working at 29.97 which is a big problem. I either have to go back to Log and Transfer from tape, which we still use as a backup, or convert the HDV files later that were transferred from the CF media.
Have you figured out a way to transfer 29.97 files from the MRU as Apple Pro Res? -
Every time I open my Log and Transfer window FCE crashes right away. I don't even have a camcorder attached. Any ideas?
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Memory: 1 GBI am getting what might be the same problem.
The log and transfer window just hangs and I get the spinning beachball.
I am trying to transfer from SD5 AVCHD and the problem only happens with one SD card. Doesn't seem to be corrupt though as it works on the camera.
Seems to Crash iMovie 08 too!
Any help would be much appreciated!
Message was edited by: Eye Doc -
AVCHD Log and Transfer Crashes FCP
We've got one machine in our facility that flat refuses to transfer AVCHD clips from the SD card.
We've tried all the usual fixes (Removing Perian which wasn't even on the machine, but I did install it then uninstall it to see if that might help!) Know about the FX Factory update but it's not on the system. I've tried different settings in the L&T prefs such as removing duplicate frames, different capture codecs etc. Nothing works.
So the symptoms are, you can see all the clips no problem, but as soon as you add one to the queue, you get a brief period of nothing, then the beach ball for about 5 seconds then a 'poof' crash of FCP. Tried capturing from 2 card reader, direct from the camera...zilch, crashes everytime without fail...sorry, with fail!
Machine spec:
FCP 6.0.5 (Can't update to 6.0.6 because of my RAID and server config)
Mac Pro Intel Dual Core Xeon 3GHz
4 MB RAM
Black Magic Extreme HD SDI card
Mac OSX 10.5.5 (again cannot update because of my XSAN config)
Help appreciated...Hi DevRona, welcome to the Apple Discussions forum for FCP
buzz online is that perian the add on for quicktime has something to do with it. but i cannot even find it on my system!
Perian is a 3rd party component and is not installed unless you installed it yourself
...mine crashes after that balloon thing appears...
If you want apt advice then you need to be clear and concise in your description of your problem
what am i doing wrong
Start a new thread, don't piggyback someone else's. List all your pertinent hardware and software specs. Take your time to clearly describe the problem as best you can ... remember that none of us are there and can see what you may or may not be doing wrong. If you do that then there is a good chance that folks here will do their level best to help you.
Best
Andy
Maybe you are looking for
-
Ipod touch won't open apps?
I have an ipod touch, and whenever I try to open an app I've downloaded that's not preloaded into the ipod, it'll open up for about a second and then instantaneously flash back to the home screen. At first is was one app, then it was several, and the
-
hi all, i use the alv with the new model in a normal abap-program and there i use the statement SET COUNTRY 'US' to show the date-format in us-mode, which works fine. doing the same with webDynpro ALV does not work. Is there another possibility to us
-
Problem filling item text in BAPI_PR_CREATE
Hello guys, I am using the bapi BAPI_PR_CREATE. I am having problems on filling up the text in the item level. I used the textID 'B04' the text will supposed to be in the 'material PO text' text field but it instead was placed in the 'item text'
-
Calling stored procedure from Perl Script
Need help with the syntax to call a stored procedure with an input paramter using Perl. The input paramter will be set within the perl script.
-
Outlook 0x80040610 exceeds message size
I am using outlook 2003 to connect to exchange and when I send an email with attachment that is over 10MB I get error 0x80040610 "the message size being sent exceeds the message size established for this user" get-sendconnector shows all send connect