Outlook 0x80040610 exceeds message size

I am using outlook 2003 to connect to exchange and when I send an email
with attachment that is over 10MB I get error 0x80040610 "the message
size being sent exceeds the message size established for this user"
get-sendconnector shows all send connectors have a maxmessagesize of 150MB
get-recieveconnector shows all recieve connectors have a maxmessagesize of 150MB
get-transportconfig shows MaxSendSize is unlimited
get-Mailbox shows MaxSendSize is unlimited.
I can recieve large emails fine. I am pulling my hair out over this....
Any help would be appreciated.
Mike

From my recent experience "Unlimited" means "Unlimited" up to the Global Message Delivery Limit
You can change this from either the Exchange 2003 console in a mixed 2003/2007 environment or ADSIEDIT in a pure Exchange 2007 environment.
More information can be found here:
http://technet.microsoft.com/en-us/library/bb124345.aspx
http://technet.microsoft.com/en-us/library/bb310771.aspx
Cheers,
Rhys

Similar Messages

Exchange 2013 with Outlook 2013 - Not getting pop-up or mail tips for attachments exceeding max size

Our environment is Exchange Server 2013 CU3 and Outlook 2013 in cached mode. We have a transport rule that sets the max attachment size to 20 mb.
If someone sends an attachment larger than 20 mb they receive an NDR letting them know the message wasn't delivered because it exceeded the max attachment size. We would like for the user to be prevented from sending the message at all or to at least
get a mail tip before they try to send the message. The Outlook pop-up message that says "The file you're attaching is bigger than the server allows. Try putting the file in a shared location ..." isn't being generated for us. Not sure if that's
because we're running Exchange or not. If that pop-up isn't going to work it would be nice if the user could at least get a mail-tip warning them that the attachment exceeds the limit. But it doesn't look likes there's a mail-tip for attachment size, only
for message size. And, I've found that the message size mail-tip only works if the limit is set on the user. It doesn't seem to work if the limit is set via a transport rule.
Has anyone else gotten Outlook to present the pop-up or a mail-tip when exceeding attachment size? Any help you can offer would be greatly appreciated.

Thanks but I performed all of those trouble shooting prior to posting to the forum. But, I have found the answer!
After referring to this article;
http://technet.microsoft.com/en-us/library/bb124345(v=exchg.150).aspx
I removed the 10mb default limits from the organization config and chose to set the attachment and message size limits in our environment via transport
rules instead. That is the only way you can actually set an attachment size limit.
I had read this article several times searching for an answer;
http://support.microsoft.com/kb/2813269#appliesto
The key is here;
"If you are using an Exchange Server account, the 20-MB attachment
limit for Internet email accounts is not used by Outlook 2013. Instead, Outlook uses the limit that is configured on your Exchange server. To modify the setting that is used to control the size of a message that is sent through an
Exchange Server account, follow these steps."
The steps that follow are for Exchange 2010 but they show setting organization limits not server limits. And note that it
says the size of a message, not the size of an attachment. Since mail-tips for message size are not displayed when the limit is set via the transport rules I thought it
was possible that the same inconsistency might apply to the attachment pop-up warning. I set the organization limits and voila! The pop-up now displays when an attachment that exceeds the message size limit is added to a message.
This is exactly what I wanted. Now users won't fill up their sent items trying to send large attachments that just bounce anyway.
It would be wonderful if Microsoft would provide information about what features of Outlook are affected when you apply message size limits at the
various levels.

Incoming message size exceeds the configured maximum size for protocol t3

Hi All,
I've encountered an error as follow:
weblogic.socket.MaxMessageSizeExceededException: Incoming message of size 50004000 bytes exceeds the configured maximum of 50000000 bytes of protocol t3.
But the request message is only 3MB, why it is enlarged to over 50M?
There is a For Each loop section in main flow, is it because for one loop, there will be a copy of request message?
How to enlarge message size for protocol t3?
Go to server/protocol and change 'Maximum Message Size' for AdminServer, OSB Servers and SOA servers?
Thanks and Regards,
Bruce

Hi,
1) After setting -Dweblogic.MaxMessageSize to 25000000
<BEA-000403> <IOException occurred on socket: Socket[addr=ac-sync-webserver1/172.24.128.8,port=9040,localport=36285]
weblogic.socket.MaxMessageSizeExceededException: Incoming message of size: '25002240' bytes exceeds the configured maximum of: '25000000' bytes for protocol: 't3'
at weblogic.socket.BaseAbstractMuxableSocket.incrementBufferOffset(BaseAbstractMuxableSocket.java:174)
2) After setting -Dweblogic.MaxMessageSize to 50000000
<BEA-000403> <IOException occurred on socket: Socket[addr=ac-sync-webserver2/172.24.128.9,port=9040,localport=59925]
weblogic.socket.MaxMessageSizeExceededException: Incoming message of size: '50000400' bytes exceeds the configured maximum of: '50000000' bytes for protocol:
't3'.
And even after setting various values for -Dweblogic.MaxMessageSize , issue weblogic.socket.MaxMessageSizeExceededException was observed.
To overcome the issue set Manual Service Migration Only as after several experiments and replicating the issue it was found out that in case of no available pinned services, must set the migration policies of the migratable targets on "Manual Service Migration Only".
And once it is corrected; it was noticed that weblogic.socket.MaxMessageSizeExceededException issue also resolved.
WebLogic Server can fail over most services transparently, but it's unable to do the same when dealing with pinned services.
Pinned Services : JMS and JTA are considered as pinned services. They're hosted on individual members of a cluster and not on all server instances.
You can have high availability only if the cluster can ensure that these pinned services are always running somewhere in the cluster.
When a WebLogic Server instance hosting these critical pinned services fails, WebLogic Server can't support their continuous availability and uses migration instead of failover to ensure that they are always available.
Regards,
Kal

Zip files Exceedingly compressed size message of 30 megabytes are quarantined

I get this message when I received a zip file over 30 megabytes.
FILE QUARANTINED
The original contents of this file have been replaced with
this message because of its characteristics.
File name: '172-16-1-4-04SEP14.ZIP'
Malware name: 'Exceedingly compressed size'
I have 3 question
1. How do I turn off the function in Exchange 2013 of blocking ZIPs over 30 megabytes?
2. Where is the "quarantine" located that the error message is referring to?
3. If I want to how can I raise the value to 50 megabytes?
Please do not post information about Forefront on this. This is not a Forefront problem
Moses Hull of Alexant Systems

Hi,
Please check if the below information helps.
Maximum attachment size in Transport rules that apply to all Mailbox servers in the organization can be created, set and viewed using below command
Cmdlets to set: New-TransportRule, Set-TransportRule
Cmdlets to Get: Get-TransportRule
Parameter: AttachmentSizeOver
Or in EAC
Mail flow > Rules > Add
or
Edit .
Use the predicate Apply this rule if > Any attachment >
is greater than or equal to
Use the predicate Apply this rule if > The message >
size is greater than or equal to
Refer
http://technet.microsoft.com/en-us/library/bb124345(v=exchg.150).aspx

Max Message Size Outlook 2007

Hello, and using Outlook 2007 and I need to set a max size message warning or blocking before send the email, Can I do this? do I need to modify the registry with a new key? thanks
note OS. is Windows 7.

Hi
There is no maximum message size but there are some server and communication dependent consideration like memory,bandwidth etc

552 message size exceeded

Hi,
We are having a problem with just one particular company sending attachments to us. Normal email with no attachments is coming in fine. email with attachments is not.
The sender (i.e at the other company) is getting the following message when they try to send to us :
"The e-mail system was unable to deliver the message, but did not report a specific reason. Check the address and try again. If it still fails, contact your system administrator. #5.0.0 smtp; 552 size limit exceeded"
The message attachment is small about 900K and we regularly receive stuff up to 20Mb. If the same attachment is sent from a different email system to us it comes straight in.
Has anyone got any advice ?
cheers
Chris

Check your host access table. This one company probably has a lower reputation score, matching a different rule in the HAT than the other companies.
If i'm not mistaken, the default maximum message size for the throttled policy is 1M. With the overhead you get when sending email attachments, this will probably block files of 900K.

552 Message size exceeds maximum message size

[Dell Inspiron 560 desktop;
MS Windows 7 Home Premium SP1 64bit; Windows Live Mail 2011; MS Word Pro 2003; Mozilla Firefox 22.0; Adobe FP 11,8,800,94; Adobe Reader 11.......]
Hello, I have the same problem, 10 emails I sent out bounced with the following same error message:
">>>xxxxxxxxxatxxxxxxxx.co.il(reading confirmation): 552 Message size exceeds maximum message size"
And they also sent the headers....which is all Greek to me. Being a very beginner computer user, I can't execute the good advice given here.
This is very strange since the emails so bounced only had 5 small pictures I had taken in my small, cheap dig camera, while other messages I had sent out
successfully before were probably 4 times as big.
Also, whose fault is it: my server RCN? Microsoft? I wonder...
I hope there's something easier for me to do to fix this problem?
Thanks ever so much for any help! :) Adela

It says to me that the message you sent was rejected along the way because it was too big. Ask the e-mail administrator of the system that's bouncing it.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

ORA-29279:SMTP permanent error:552 5.3.4 Message size exceeds fixed maximum

Hi,
I can send attachments smaller than 25MB.
But my attachment is 27MB and it fails. Don't ask why I need to send this big file by email, I have to.
Where can I change this maximum size?
- any parameter in utl_smpt?
- any parameter in server where DB is located? (Linux 2.6.18-238.1.1.el5)
- any parameter in smtp machine server?
Thanks.
Joaquín González
Edited by: Joaquin Gonzalez on Apr 12, 2012 11:46 AM

The actual error, "+552 5.3.4 Message size exceeds fixed maximum+", is from the smtp server. Oracle expects a 0 return code and instead get a 522 return code in the smtp server's response (to the DATA command). So Oracle throws an exception that in turn contains the error response of the smtp server.
Interesting that you did not get the error earlier - many smtp servers have the ceiling set a lot lower and you can expect this error after sending around 5MB of data.
There are ways around this. Send the attachment as multiple fragments using a compression technology like zip or rar (where it is fairly easy for the recipient to reconstruct the source from the pieces send).
There's also another problem. The 20+ MB e-mail may be accepted by the smtp server, but the POP3, IMAP (or Exchange?) account (mail drop) may not accept an e-mail of that size.
Success is also assuming that you are delivering that mail directly to the correct/target smtp server. If not, then that e-mail needs to be relayed via a number of intermediate smtp servers before reaching the target smtp server and domain.
And there is a good chance that one of these relay servers will object to the size of the e-mail and trigger a hard bounce response.
Keeping an attachment size down to at most 3 to 5 MB is IMO the better approach as that guarantees a better chance of delivery than a 20+ MB e-mail.

Problem in Rolling to new a log file only when it exceeds max size (Log4net library)

Hello,
I am using log4net library to create log files.
My requirement is roll to a new log file with name appended with timestamp only when file size exceeds max size (file name ex: log_2014_12_11_12:34:45 etc).
My config is as follow
<appender name="LogFileAppender"
type="log4net.Appender.RollingFileAppender" >
<param name="File" value="logging\log.txt" />
<param name="AppendToFile" value="true" />
<rollingStyle value="Size" />
<maxSizeRollBackups value="2" />
<maximumFileSize value="2MB" />
<staticLogFileName value="true" />
<lockingModel type="log4net.Appender.FileAppender+MinimalLock" />
<layout type="log4net.Layout.PatternLayout">
<param name="ConversionPattern"
value="%-5p%d{yyyy-MM-dd hh:mm:ss} – %m%n" />
<conversionPattern
value="%newline%newline%date %newline%logger
[%property{NDC}] %newline>> %message%newline" />
</layout>
</appender>
Issue is date time is not appending to file name.
But if i set "Rolling style" as "Date or composite", file name gets appended with timestamp, but new file gets created before reaching max file size.(Because file gets created whenever date time changes, which i dont want) .
Please help me in solving this issue?
Thanks

Hello,
I'd ask the logfornet people: http://logging.apache.org/log4net/
Or search on codeproject - there may be some tutorials that would help you.
http://www.codeproject.com/Articles/140911/log-net-Tutorial
http://www.codeproject.com/Articles/14819/How-to-use-log-net
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

SOAP message size limitation for sender soap adapter

Hi All,
We are facing critical production issue in case of sender SOAP Adapter,
If the sender soap message is having 114359 Bytes than the Third party is getting exception and SOAP request is not reaching XI.
If the message size is less then 100kbytes then no exception will come.
Is this a limitation that SOAP message size should not exceed 100kbyte?
Thnaks in advance
Best Regards,
Harleen Kaur Chadha

Hi ,
Thanks for your inputs,Could you please tell me which hardware configurations are you talking about?
Are you people talking about harware configurations for XI?
Best Regards,
Harleen Kaur Chadha

Group message size limit bug

Recently some friends set up a group chat with 13 members. The chat works fine for everyone except me. My phone seems to not want any group chats with more than 10 people and it just splits the chat and makes new chats always excluding a few people. This really makes no sense considering the group chat works fine for all the other iphone users in the chat.

Hi,
i need to set a message size limit that applies to
both incoming and outgoing mail. I see there is an
user-attribute I can set on LDAP, mailmsgmaxblocks,
but the reference guide says that it is: "The size in
units of MTA blocks of the largest message that can
be sent to this user". I want the limit to apply to
messages SENT by an user, too.
I don't think that this can be an user-based
attribute, because mail it would not apply to users
not belonging to local domains sending inbound mail,
but there is an MTA-wide option I can set to do
this?I did find this option in the 2005Q4 messaging server reference guide:
<snip>
LDAP_SOURCEBLOCKLIMIT: The LDAP attribute to specify the maximum number of
blocks allowed in a user�s message. The MTA rejects messages containing more blocks than this from a user. An MTA block is normally 1024 bytes, but this can be changed
with the BLOCK_SIZE option in the MTA option file. This is a user analog to the sourceblocklimit keyword and has no default.
</snip>
This seems to describe exactly what you are after, I haven't personally tried it before.
Implementing will require jumping through a few hoops:
1. Extend your directory schema to add a new user attribute (you will need to dig through directory server manuals for help on this).
2. Add LDAP_SOURCEBLOCKLIMT=<attribute from (1)>
3. Add <attribute from (1)> to the users entry set to the the number of blocks of the maximum email e.g. 1024 would be 1MB email limit.
To limit ALL emails across the MTA, both incoming and outgoing, change the BLOCK_LIMIT option.dat variable:
"Places an absolute limit on the size, in blocks, of any message that may be sent or received with the MTA. Any message exceeding this size is rejected. By default, the MTA
imposes no size limits. Note that the blocklimit channel keyword can be used to impose limits on a per-channel basis. The size in bytes of a block is specified with the BLOCK_SIZE option."
Regards,
Shane.

Extending maximum message size

I want to extend the maximum message size for a standalone client which is implemented according to the documentation. The server (9.1) is already configured for an extended message size of 20000000 via web console (environment - server - protocols - general). But I get the "weblogic.socket.MaxMessageSizeExceededException: Incoming message of size: '10000080' bytes exceeds the configured maximum of: '10000000' bytes for protocol: 't3'" independently whether I give the parameter "-Dweblogic.MaxMessageSize=20000000" (or MaxT3MessageSize) to the clients jvm or not. How can I increase the message size?

It doesn't seem to throw an error message - at least not in the logs that I have searched through -but rather simply rejects the message. Everything works properly if the message is trimmed to fit the 64K limit.
The message recieved by the java application:
javax.jms.JMSException: JMSRemoteServer[server1:3701]: remote server is closed
at com.evermind.server.jms.JMSUtils.toJMSException(JMSUtils.java:1853)
at com.evermind.server.jms.JMSRemoteServer.assertOpen(JMSRemoteServer.java:691)
at com.evermind.server.jms.JMSRemoteServer.assertOk(JMSRemoteServer.java:700)
at com.evermind.server.jms.JMSRemoteServer.enqMessage(JMSRemoteServer.java:614)
at com.evermind.server.jms.EvermindSession.send(EvermindSession.java:1098)
at com.evermind.server.jms.EvermindMessageProducer.send(EvermindMessageProducer.java:409)
at com.evermind.server.jms.EvermindMessageProducer.send(EvermindMessageProducer.java:201)

Maximum message size problem

Hello,
I'm trying to send a message of 30MB and the log reports:
"552 5.2.3 sorry, that message size exceeds the maximum "
After configuring sourceblocklimit and blocklimit in channels parameters the message still apears.
I have compiled :/opt/SUNWmsgsr/sbin/imsimta cnbuild
/opt/SUNWmsgsr/sbin/imsimta restart dispatcher
and restarted services.
What else should I change to send the message?
Thanks in advance.

the log looks like:
31-Mar-2005 18:31:45.20 tcp_intranet tcp_local E 36763 [email protected] rfc822;[email protected] [email protected]
31-Mar-2005 18:31:48.89 tcp_local R 36763 [email protected] rfc822;[email protected] [email protected] dns;gsmtp185-2.google.com (TCP|200.12.176.35|43298|64.233.185.114|25) (mx.gmail.com ESMTP 16si699150wrl) smtp;552 5.2.3 sorry, that message size exceeds the maximum
The messages is enqueued, so this tells me that limitation is outside?

How to hide the mail message size

Suddenly, when writing a new email message I have a new field that appeared - Message Size.
I have not found a way to hide this. Can it be hidden? Can the signature field be hidden too?
Thanks

WHENEVER YOU UPDATE A NEW FIRMWARE, THEN ITUNES GIVE YOU TWO OPTION, 1. BACKUP IN MY ICLOUD, 2. BACKUP TO MY COMPUTER, YOU CAN CHOSE YOUR OPTION AND THEN BACKUP. CONTACTS, MAIL, MESSAGES BACKUP IS BEEN TAKEN UP BY ICLOUD.
NOTE: FOR MAIL BACKUP, YOU NEED TO HAVE MICROSOFT'S OUTLOOK 7, TO VIEW IT.
APPS, BOOKS, SONGS, ALL ARE STORED IN YOUR COMPUTER. GO TO MY COMPUTER>C DRIVE>USER>CLICK ON YOUR FOLDER NAME OR ADMINISTRATOR NAME>MY MUSIC....AND THEN YOU WILL SEE ITUNES FOLDERS WHERE THERE IS BACKUP OF YOUR APPS, BOOKS, SONGS, VIDEOS.
RESTORE HAS TWO OPTION, RESTORE FROM ICLOUD OR MY COMPUTER, IF YOU MADE A BACKUP IN YOUR COMPUTER, THEN CHOOSE RESTORE FROM MY COMPUTER OPTION.
NOTE: FOR PICTURES FROM CAMERA ROLL, FIRST, PLUG YOUR DEVICE IN YOUR MAC OR PC, THROUGH USB PORT. GO TO MY COMPUTER> YOU WILL SEE IPHONE ICON, CLICK IT. INTERNAL STORAGE>DCIM>CLICK THE FOLDER NAMED IN NUMBERS AND THEN YOU CAN SEE ALL YOUR PICS. COPY ALL AND KEEP IT IN YOUR DESIRED FOLDER.
ITUNES IS THE SOLE PROVIDER OF YOUR RESTORATION AND BACKUP, HAVE A LOOK TO EVERY OPTION AND DISCOVERY NEW ATTRIBUTES OF ITUNES. THIS WILL STRENGTH YOUR KNOWLEDGE ABOUT YOUR IDEVICE.

Create Transport rule for restrict message size and send a rejected message CC: to Administrator

I want to create a Exchange Transport rule for message size restriction (10 MB) when message size is exceed to 10 MB it rejected by the Exchange server and
also rejected message CC: to Administrator. I also create it but unable to configure rejected message CC: to Administrator. Thanks.
Babu

Hi Babu,
I have some tests in my environment using Exchange 2013, you can create a transport rule such as follows to achieve your goal.
Hope this can be helpful to you.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

Outlook 0x80040610 exceeds message size

Similar Messages

Maybe you are looking for