FCPX 10.1.3 limiter not working for me after choosing a mono channel

When I try to add a limiter with a -4.5db limit to a mono channel in FCPX 10.1.3 it never works as it should -- usually seems to limit the sound to -12db!
Any tips for how I can the Limiter this working as it should?
Under Audio my Channel Configuration shows as stereo for a particular clip.
Under Channel Configuration, I choose Dual Mono, untick one of the mono channels
Then I add the Limiter to that clip, set to -4.5db using the Larry Jordan settings from this article http://www.larryjordan.biz/technique-using-the-soundtrack-pro-limiter-filter/

yes, separate archives. For clearness, here again what I did, step by step:
1. Inserted the SD-card in my Mac. Opened the import-window. The Camera is listed twice. See the screenshot:
If I click on the first one (looking like a DSLR), I see the iFrame clip in the browser. If I click the second one (looking like a camcorder), I can see all the AVCHD clips in the browser. Importing clips into an event works fine for both "Cameras".
2. Clicked on the first one again, then created an camera archive. A white circle behind the camera name shows the process.
3. Same for the second one. White circle during import, too.
In both cases, FCPX informed me in the window for the archive's destination, that the archive will be about 18 GB.
4. waited for a loooooooong time, until the white circles disappeared and the background activity window does show no action any longer.
5. After that, tried to open the archives in FCPX (this time with favorite-Tab...). In both archives, I can only see the iFrame-Media. Not one of the about 150 AVCHD clips ...
6. Switched to Finder and examined both archives (opened with "show package content") Same size (approx. 18.1 GB) and same content. See below:
7 When I open the AVCHD-subsection of the archive (via show package content), I can see, that in both archives ALL files for the AVCHD content is contained completely in the correct structure (too big for a screenshot...)
In the root of the package, there are, as you can see, two XML (.plist) files. The smaller one indexes the iFrame-media, the bigger one the AVCHD-media.
So, the archives seem to be complete. Just, that FCPX does not recognize the AVCHD content...

Similar Messages

"Creative Suite 5.5 Design Standard" key not working for Acrobat after re-install

Hi,
I reinstalled the OS on my mac. After that I reinstalled my "Creative Suite 5.5 Design Standard" from the discs. Illustrator etc. working fine, but when I try to enter the serial number when starting Acrobat it says: "This serial number is not valid for this product".
Please help, because I really need Acrobat
Kind regards,
Niels

Hi MrMuji,
Are you still facing this issue?
How did you install Acrobat on your machine? You may also private message: How Do I Send Private Message me you serial number.
Regards,
Ajlan Huda.

SAP_MANG Evaluation Path not working for MSS after ECC6 Upgrade

Hello All,
We are upgrading to ECC6 and still using an older version of the java/HTMLB MSS Business Package. We are seeing strange results in the vacancy request overview iview (team viewer like component) which is using a view driven by SAP_MANG Evaluation Path.
SAP_MANG looks like this...
10 * B 008 * S
20 S A 012 * O
30 US A 208 * P
Our View is ZRCPOS using...
Eval Path - SAP_MANG
Eval Objects - O_NACH_S
Initial Evaluation Depth - 3
Column Group - ZRC_VACREQ_OV
Header Type - RC_VAC_HEADER
The iview is meant for position maintenance and should show a dropdown of orgs. When an org is selected a list of positions/holders is shown to modify, delimit, etc. The problem is that in the dropdown "Select organizational unit to display positions" instead of...
Test Org 1
Test Org 2
We have...
Test User1
Test Org 1
Test Org 2
...so the user us shown as an org. Right off I suspected the upgrade to MSS 60.1.22 (the newest version of the old Business Package) so I installed the older versions of the components and the actually still worked but also showed this condition. So I have ruled out the java side as a source of the problem.
Looking at HRP1001 I see the following relationships among suspect objects.
Object P 1234567 to Object S 9876543 via B008
Object S 1234567 to Object O 9876543 via A012
no relationships US to P via A208
Given the Eval Path above, does anyone have any idea why this would display this way or have a suggested approach to solve.
Thanks,
Doug

>
Doug Steckel wrote:
> Hi Ranganath,
>
> Thanks for the quick reply. Yes the Skip flag is set on relationships 10 and 30. I would also think that would prevent this but it is not.
>
> Thanks,
> Doug
not all relationships represent physical data records in the database. some are derived and without looking at the system, I believe the US 208 to P is a derived relationship.
Are you sure all the users you are testing with have a proper sy-uname setup for all respective pernrs in PA0105?

Nokia Store is not working for N8 after Belle refr...

Hi
Nokia N8 After Belle Refresh update the Nokia Store is not at all working
Not able install apps through Store, Try to send rectification steps to
Email id -
Moderators notes: Personal email removed.

Hi paramashivam
Try the resolution provided on this link and this.
If my post helped you, please don't forget to click on the "White Star" and if it resolved your issue click on "Accept as Solution"

Dynamic link not working for PPCS4 after installing CS4

Background. I had CS3 Master Collection. I then needed some features in PPCS4 so I purchased that as a standalone upgrade. Recently I decided to upgrade the entire suite to CS4 Creative Suite 4. Everything installed fine. However when I try to go from PPCS4 using Dynamic Link I get a message that says Adobe Dynamic Link requires Adobe Production Premium (which I have). I assumed I needed to delete PPCS4 and I went so far as to delete the entire CS4 suite + the Premiere Pro and start over. Again, it installed fine but the same problem happens all over again.
Is there some config file somewhere or registry tweak so I can use dynamic link? I am on Vista 64 machine.
Thank you - Pat

Use the uninstall scripts from Adobe to completely remove all vestiges of PPro from your computer. Then perform the installation.
Links to the scripts are on the troubleshooting page.
Cheers
Eddie

Mms messaging not working for iPhone4 after iOS6 update

I updated my AT&T iphone4 a couple days ago and now I can't send picture messages.
Anyone knows how to fix this. I have tried resetting my network setting.

Settings-------> General--------> Cellular---------> Cellular Datta Network
This gets you to the apn page. i entered everything but the MMSC
(Mine is http://mms.msg.eng.t-mobile.com//mms/wapenc).
I left the MMS Max Message size area empty
The MMS UA Prof URL on my phone reads: http://www.apple.com/mms/uaprof.rdf
RECAP:
On the Cellular data page on my phone it reads as follows
Cellular Data
APN           internet
Username     (BLANK)
Password     (Blank
MMS
APN          mms
Username mms
password   (BLANK)
MMSC     http://mms.msg.eng.t-mobile.com//mms/wapenc
MMS Proxy     188.149.250.10
MMS Max Message Size     (BLANK)
MMS UA Prof URL     http://www.apple.com/mms/uaprof.rdf
Internet Tethering
APN     internet
I then shut the phone off and turned it back on. I HOPE THIS HELPS

I have an event in my calendar that was sent by someone who does not work for the company anymore and I am reminded 2 times a week. How can I remove it?

I have an event in my calendar that was sent by someone that does not work for the company anymore and I am reminded 2 times a week. How do I delete it?

Tap on the event to open the event. Click the 'Edit' button in the event bubble, then press the 'Delete Event' button at the bottom of the Edit pop-up. It's a little different for events that come through Microsoft Exchange, you tap the event to bring up bubble and click the 'Details' button, and then press 'Decline' to remove the event.

IPhone 6 External Mic not working for Siri/Dictation

I am finding that the external mic on my iPhone 6 works for phone calls and voice memos, but does not work for Siri/Dictation. When I plug in the earbuds, they work for everything (including Siri/Dictation).
Was chatting to Apple support who had me reset all settings. I thought that worked, but realized that after a reset, Siri is off and I was talking to "Voice control" (which works). When I turned Siri back on, it does not work.
I have two questions for the community to see if you can help:
1- I have been assuming this must be a software problem since the mic does work for non-Siri access. But is that true? Is there a hardware component that Siri depends on which could be faulty here?
2- If it is software, what action should I try to address it? I have done a reset all settings already and that did not help.
Doug

Hi, everyone. I talked to Apple Genius at Apple Store last week, she said it should be a software issue and I needed to reset my iphone 6 plus as a new device and I can not use the backup restore from my iCloud, it was because the microphone bug or glitch can be in the backup also. Ok, followed her advice, erased all contents and set my iphone as a new device , the microphone worked for an hour, but went bad again. I used "voice memo" app from Apple to test the microphone. It is the best tool since it doesn't involve any provider's network and it doesn't need another person's phone to listen and test. If you can hear your voice recording clearly, then the mic works. I tested it 3-4 times a day for a few days now, half of the time the mic doesn't work. So, set as a new device isn't working. The issue is intermittent and it comes and goes as it likes, so very annoying. I carry my Apple EarPods with me in these past few days ust in case I need to make important phone calls. Will need to go back to Apple Genius this weekend for sure. Will give update after the weekend.

CALLER ID not working for International incoming calls

Hi,
I've a strange issue where CALLER ID not working for International incoming calls, it shows INTERNATIONAL UNKNOWN NUMBER in the phone display, but the number shows correclty in Verizon Call assistant !!!
Any clue?

yashshankar wrote:
Hi
I recently purschased an Online number but the caller id does not work for incoming calls.How do we resolve this problem?.
Regards
Yash
You didn't mention what country your Online Number is in. Not all of Skype's Online Numbers are eligible for use as Caller ID when calling telephones or sending SMS messages. If your number is from one of these countries (Chile, Denmark, Estonia, Hong Kong, Poland, Sweden, the UK and the US), then it can be used this way. Otherwise, you can use a mobile number from countries other than Japan or Mexico as Caller ID with Skype, after the number goes through a verification process where Skype sends SMS messages with codes to that number.
To get to these settings, log into your Skype account here on the Skype web site using the "Account" link at the top of this page. You'll see a screen that would include your current Caller ID settings, and a link to change that. If your Online Number is from one of those countries I referenced above, just select it and you're done.
Hope that helps!
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

Select All in a table does not work for Drag and Drop

Hi. I am using Jdeveloper 11.1.1.2 but have also reproduced in 11.1.1.3.
I am trying to implement drag and drop rows from one table to another. Everything works fine except when I do a Select All (ctrl-A) in a table, the table visually looks like all rows are selected, but when I try to click on one of the selected rows to drag to the other table, only the row I click on is dragged.
I tried setting Range Size -1, fetch mode to FETCH_ALL, content delivery to "immediate" but nothing works.
I even have reproduced not using a view object but just a List of beans with only 5 or 10 beans showing in the table.
Does anyone know how to get Select All to work for a Drag Source?
Thanks.
-Ed

Frank-
OK, thanks for looking into that. I also submitted this service request, which includes a simple sample app to demonstrate the problem:
SR #3-2387481211: ADF Drag and Drop does not work for rows in table using Select All
Thanks again for the reply.
-Ed

Form Designed in LiveCycle will not work for End User

Please Help!
I am a newbie to Adobe LiveCycle but recognized the utility in the program, so decided to give it a while to try and streamline some of my employer's forms. After spending too much time learning how to design a form (much to the dislike of my boss), I am finally going to have to ask for some help. So here's the deal:
I've designed a dynamic pdf in LiveCycle with two master pages and two repeating flowed subforms. The first repeating subform is basically an expanding table intended to be used as a photographer's log where they can log each photo taken with the camera. The expanding table has some code with a button at the top for the end user to enter the number of photos on the photo roll, click submit, and table expands to however many instances of rows are needed for each photo that was taken. The second subform is basically an image field and text fields used as photo captions/photo compilation pages. When the end user clicks submit on the first subform to expand the table, I also have javascript in that click event to also create same amouint of instances of the second subform (the photo compilation page(s)). Each text field for the photo caption on the second subform is populated by the data entered into the photo log table cells. I was able to find a script to correctly populate those fields for each instance of the table. Wish I had the form here, but it's at work at the moment.
My problem is this: I've scratched and clawed to get all of the forms expanding correctly and the scripts populating each instance of the fields correctly and everything works great in LiveCycle preview. I then saved the form as PDF for use by my field crew personnel (whom all use, at the very least, Adobe Pro 9, but most Pro X). I sent the new form to them and they move it to their desktop, open it with Adobe Pro, and populate all of the fields and everything works swimmingly. However, once they save it, it gets all jumbled and they can't even print it. We even thought we found a workaround by entering all data and printing to PDF, but even that has turned out to not work. I checked to make sure that I designed and saved the form in LiveCycle for use with the Adobe Pro versions, but still not working for my end users.
Anyone have any thoughts on my long explanation?? Please HELLLLPPPP!

The error(s) occur when trying to save the document. I want each user to tell the first page how many rows they will need in the photo log table, so they would enter however many photos were taken in the box: "Number of Photos on Roll:" ---> Then click the "Submit" cmd button. That should expand the table. Once it expands, it should also add the same amount of instances of the photo compilation page (2nd Page) as there are rows in 1st page table. Then the user will populate each cell of the table on page 1 with data. The data entered into the page 1 table cells will populate the text fields (photo caption) in Page 2 once the user clicks on the "Populate Captions!" cmd button in the lower left corner of the table on Page 1.
The problem is in the distributing of the form to the user so they can save the form after populating the data. I did a test run this morning and for some reason it did do the "print to PDF" correctly for 5 photos on the roll (though this has not been happening every time and especially for a large number of pages, ie. 80 photos). However, after entering the data for 5 rows on page 1 and then populating the 5 photo compilation pages, I saved a copy as "Save As PDF" and closed the document. Then re-opened the copy in Acrobat Pro X. The new copy:
-had 5 additional rows added to Page 1
-Duplicates of some of the fields
-Only retained the 1st instance of the Second Page (Photo w/ Caption) and not all fields were populated
Again, this all works fine in the LiveCycle Preview but not anywhere else. I do not have this set up to be linked to an external data source (YET) but there is javascript in the cmd buttons. I also do not want to distribute this form to end users and then collect the data back from them. I want them to be able to save a copy of my LiveCycle designed form, open in Adobe Pro, populate the data and save as many copies as needed for form production.

Wake on Demand: Not working for some services, others OK

I haven't been able to figure this problem out... Wake on Demand for a previous generation Mac mini running Snow Leopard 10.6.8 works for things like a CrashPlan automated backup but does not work for things like remote SSH login or Screen Sharing. In all cases, the services are being originated on a latest generation iMac running Mac OS X Lion (10.7.2).
While it's not an earth-shattering event to get off my backside and walk over to the Mac mini across the house to press its Shift key to waken the thing, it gets rather old to have to keep doing so, especially since CrashPlan automated backups are taking place while the Mac mini is otherwise asleep (the sleep indicator is slowly pulsing).
I've been through the Apple tech notes regarding Wake on Demand for Snow Leopard 10.6 and have ensured that AirPort and its network are at the top-most position in their respective lists. Other than that, I'm not sure what else I can do. Wake on Network is enabled in the Snow Leopard Mac mini's network System Preferences and there doesn't seem to be any on/off option in the AirPort Extreme base station (just recently updated to 7.6 firmware).
Any thoughts... hints... suggestions?
One final note: this Mac mini is new as of July 2011; just days before the latest generation of Mac mini came out. It came pre-installed with Snow Leopard and, as soon as the users of this mini find software replacements for the old PPC style applicaitons they're used to using, will be upgraded to Lion. However, I feel a bit unsettled in making the move to Lion if I can't get a Snow Leopard feature to work properly. There's no telling if the Lion upgrade will actually fix this behavior or make it worse.
Thanks in advance.

I don't think you can wake on network with a closed lid. Try keeping the lid open and putting the machine to sleep. Does it work?

DNS not working for some computers

We have a SRP521W router and is set up with one SSID for wireless. In our office all the computers (5) can connect but only some may get on the internet. I have a laptop I am testing with and it will not connect, wired or wireless.
I found an article relating to flushing DNS, tried that, no luck.
I found another that said I should try setting my DNS to 208.67.222.222 and this worked, internet works fine.
I tried rebooting the DSL modem and router, tried many different things but am not a networking guru so I am just not sure why the DNS is not working for one computer but works for another, connected to same LAN or SSID.
Thanks,
Brad

Though what Don posted is one way to accomplish it, I never add anything to my DNS and it works fine. Windows DNS, in a default installation, will automatically forward to the root (.com, .edu, .gov, etc.). So I always just point my workstations
to my Domain Controller as their DNS and everything works just fine without any additional configuration.
Guess I'm one of those who won't even trust Google for sharing a DNS, particularly when I have never needed to set up any forwarders.
.:|:.:|:. tim

Thunderbird Mission Control Desktop/AutoConfig not working for some users

I have the file: "C:\Program Files (x86)\Mozilla Thunderbird\defaults\pref\custom.js"
It contains:
pref("general.config.obscure_value", 0);
pref("general.config.filename", "TMcustom.cfg");
I have the file: "C:\Program Files (x86)\Mozilla Thunderbird\TMcustom.cfg"
It contains:
var promptService = Components.classes["@mozilla.org/embedcomp/prompt-service;1"]
.getService(Components.interfaces.nsIPromptService);
promptService.alert(null, "title", "testing");
For most of my users the alert pops up fine when I start Thunderbird, but for a few it doesn't. All of the machines where setup with the same install script. If I log into one of the machines where it's not working as a different user, then it works fine, so I know the files are in the right spot. So why would it not work for specific users? Is there something in the user's Windows profile that could cause it to not work? Or are there any other suggestions?

As it turns out this was a known bug that was corrected in the recent release of Java 7_65 and Java 8_11. Here is a link to the bug description in the database.
Bug ID: JDK-8019274 RMI thread can no longer call out to AWT thread for webstart app

After Upgradation BPF is not working for some users

Hi All,
We have recently upgraded from BPC 5.1 to 7MS SP7. we are having multi server setup with one application / reporting server (windows 2003 and one sql server 2008 (windows 2003 64 bit).
Intially before upgradation we don't have any issues with BPF and it worked fine for all users. But post upgradation tasks within the BPF does not work for other users except for the first two people who first used it. Other users have the same rights as the ones who can access the tasks.
when they click on the link it gets them to eExcel and the right application but doesnt open the package or report assigned to the task. It doesn't give us any errors, on the status bar we get a message finalising but does not getting any thing.
Any inputs ??

Hi,
Are you sure that those users have installed BPC 7 SP7 clients on their machine? Meaning that you uninstalled 5.1 clients and installed the new client from http://servername/Osoft?
If yes, you should maybe run a client diagnostic on the machines and also check the Management Console for any error messages.
Hope this will drive you to a potential solution.
Best Regards,
Patrick

FCPX 10.1.3 limiter not working for me after choosing a mono channel

Similar Messages

Maybe you are looking for